Hoop Tech Clamp

Assembly and Attachment

Contents of package

The Base of the Hoop Clamp and wing attachments

Attach as shown…

This hoop is for heavy fabrics…

This hoop is for lighter weight fabrics

Attach hoop base as shown

Make sure that the clamp is in the open position

Then Tighten the large black knob

Attach top of hoop as shown

Step 1…

Step 2

Then clip other side.

Now to place on the machine…

Turn on Machine

Press “Set” to complete Frame Move

With the control panel, move the x-carriage to the back

Insert Hoop tech clamp as shown

Slide the wings under the arm clamps as shown

Complete attachment

Adjust the side bolts for the correct height left and right.

End