HONEYWELL PROCESS SOLUTIONS TRAINING – YOUR PARTNER … · HONEYWELL PROCESS SOLUTIONS TRAINING – YOUR PARTNER IN EXCEEDING PERFORMANCE GOALS Training Programs in: US, Canada

HONEYWELL PROCESS SOLUTIONS TRAINING – YOUR PARTNER IN EXCEEDING PERFORMANCE GOALSTraining Programs in: US, Canada and Latin America (Americas); Europe,Middle East and Africa (EMEA); Asia Pacific (AP)

Training Catalogue 2020

2 2020 Global HPS Training Catalogue2 2020 Global HPS Training Catalogue

Table of ContentsINTRODUCTION ....................................................................................................10

TRAINING CENTERS ............................................................................................11

TRAINING PRODUCT / PROGRAM ....................................................................12

TRAINING MODEL ................................................................................................13

E-LEARNING SOLUTIONS...................................................................................15

CUSTOMER CERTIFICATION PROGRAM .........................................................17

EXPERION PKS HONEYWELL CERTIFIED ASSOCIATE ................................21

Overview ..........................................................................................................21EXP-6000-CT – Experion PKS: Fundamentals - System Overview - Certified Associate ........................................................................ 21

EXP-1021-CT – Experion PKS: Fundamentals - TPS to Experion PKS/Experion LCN System Integration Overview - Certified Associate .................... 21

Implementation ..............................................................................................21EXP-02-CT – Experion PKS: Fundamentals - Server Engineering and Configuration Implementation - Certified Associate .............................................. 21

EXP-03-CT – Experion PKS: Fundamentals - Graphics Design and Building Implementation – Certified Associate ......................................................................... 21

EXP-1022-CT – Experion PKS: Fundamentals - Experion LCN (ELCN) Network Migration Implementation - Certified Associate ..................................................... 21

EXP-2001-CT – Experion PKS: Fundamentals – Control Execution Environment Controller Implementation – Certified Associate ......................................................................... 22

EXP-2001C3-CT – Experion PKS: Fundamentals – C300 Controller Implementation – Certified Associate ......................................................................... 22

EXP-2001UOC-CT – Experion PKS: Fundamentals – UOC Controller Implementation – Certified Associate ......................................................................... 22

EXP-24-CT – Experion PKS: Fundamentals – Controller Fieldbus Configuration Implementation – Certified Associate ............................................ 22

EXP-30-CT – Experion PKS: Advanced – Field Device Manager (FDM) Implementation and Troubleshooting – Certified Associate ............................... 22

EXP-48-CT – Experion PKS: Fundamentals - Virtualization Implementation - Certified Associate ............................................................................................................. 23

Administration ................................................................................................23EXP-23-CT – Experion PKS: Advanced – Server and Station Installation and Administration Certified Associate ............................................................................... 23

Operation .........................................................................................................23EXP-01-CT – Experion PKS: Fundamentals – Controller Operation – Certified Associate ................................................................................................................................ 23

EXP-12-CT – Experion PKS: Fundamentals – TPS Operation – Certified Associate ................................................................................................................................ 23

EXP-13-CT – Experion PKS: Fundamentals – Controller and TPS Operation – Certified Associate ............................................................................................................. 23

EXP-26-CT – Experion PKS: Fundamentals - SCADA Operation - Certified Associate ................................................................................................................................ 24

Maintenance ...................................................................................................24EXP-05-CT – Experion PKS: Fundamentals – Controller/SCADA Troubleshooting And Maintenance – Certified Associate ............................................................................................................. 24

EXP-05C3-CT – Experion PKS: Fundamentals – C300 Troubleshooting And Maintenance – Certified Associate ............................................................................... 24

EXP-25-CT – Experion PKS: Advanced – System Level Troubleshooting and Maintenance – Certified Associate ............................................................................... 24

SAFETY MANAGER CERTIFIED ASSOCIATE ...................................................24

Implementation .............................................................................................24SM-4551-CT – Safety Manager: Fundamentals – Implementation – Certified Associate ................................................................................................................................ 24

Maintenance ..................................................................................................25SM-4550-CT – Safety Manager: Fundamentals – Maintenance – Certified Associate ................................................................................................................................ 25

TOTALPLANT SOLUTION (TPS) CERTIFIED ASSOCIATE .............................25

Overview ..........................................................................................................25TPS-0004-CT – TPS: Fundamentals – LCN/UCN Overview - Certified Associate ................................................................................................................................ 25

Implementation ..............................................................................................25TPS-0005-CT – TPS: Fundamentals - LCN Configuration Implementation - Certified Associate .............................................................................................................. 25

TPS-0006-CT – TPS: Fundamentals - Point Building and UCN/HPM Implementation - Certified Associate ........................................................................... 25

TPS-0007-CT – TPS: Fundamentals – HPM Points & CL Configuration and Implementation - Certified Associate ........................................................................... 25

TPS-0008-CT – TPS: Fundamentals - APP Node AM/CL Implementation - Certified Associate ............................................................................................................. 26

TPS-0009-CT – TPS: Fundamentals - Picture Editor Graphics Building Implementation - Certified Associate .......................................................................... 26

Maintenance ..................................................................................................26TPS-0014-CT – TPS: Fundamentals – LCN and Advance Cable Maintenance - Certified Associate ............................................................................................................. 26

TPS-0015-CT – TPS: Fundamentals – UCN/HPM and Advance Cable Maintenance - Certified Associate ............................................................................... 26

UNIFORMANCE PHD HONEYWELL CERTIFIED ASSOCIATE ......................26

Maintenance ...................................................................................................26UNI-5747-CT – Uniformance PHD: Fundamentals – System Administration – Certified Associate ............................................................................................................. 26

UNI-0002-CT – Uniformance PHD: Fundamentals – Process Studio and System Administration – Certified Associate ............................................................ 26

Table of Contents 3

ADVANCED APPLICATIONS ...............................................................................28

ADVANCED ALARM MANAGEMENT .................................................................28

Implementation ..............................................................................................29AAM-0004 – Adv. Alarm Mgmt.: Fundamentals – DyaNMo Effective Usage Implementation .................................................................................................................... 29

AAM-4425 – Adv. Alarm Mgmt.: Fundamentals – Effective Usage Implementation .................................................................................................................... 29

AAM-4542 – Adv. Alarm Mgmt.: Fundamentals – Best Practices, Techniques and Tools Implementation ................................................................................................ 29

Administration ................................................................................................29AAM-0003 – Adv. Alarm Mgmt.: Fundamentals – DyaNMo Installation & System Administration ....................................................................................................... 29

AAM-4426 – Adv. Alarm Mgmt.: Fundamentals – Installation & System Administration ...................................................................................................................... 29

AAM-4572 – Adv. Alarm Mgmt.: Fundamentals – OM Pro Administration ..... 29

ADVANCED PLANNING AND SCHEDULING ...................................................31

Implementation ..............................................................................................32APS-PS02 – Adv. Planning & Scheduling: Fundamentals – Production Scheduler Implementation ............................................................................................... 32

ADVANCED PROCESS CONTROL ......................................................................34

Implementation ..............................................................................................35APC-0001 – Adv. Process Control: Advanced – Profit Controller and Profit Optimizer Implementation ............................................................................................... 35

APC-0002 – Adv. Process Control: Fundamentals – Profit NLC Design for Polymer Plants Implementation ..................................................................................... 35

APC-4516 – Adv. Process Control: Fundamentals – Profit Controller Implementation .................................................................................................................... 35

APC-4522 – Adv. Process Control: Fundamentals – Inferential Modeling With Profit Sensor Pro Implementation ................................................................................. 35

Maintenance ...................................................................................................35APC-4523 – Adv. Process Control: Fundamentals – Profit Controller Maintenance ......................................................................................................................... 35

ADVANCED SOLUTIONS ......................................................................................37

Operation .........................................................................................................38MTKS-0001-AT – Advanced Solutions: Fundamentals – Alarm Manager Operation ................................................................................................................................ 38

MTKS-0002-AT – Advanced Solutions: Fundamentals – Operational Insight Operation ................................................................................................................................ 38

MTKS-0003-AT – Advanced Solutions: Fundamentals – Control Performance Monitor Operation ............................................................................................................... 38

ASSET MANAGEMENT AND RELIABILITY SOLUTIONS ...............................40

Implementation ..............................................................................................41AMR-4524 – Asset Mgmt. & Reliability Solutions: Fundamentals – Asset Manager Implementation ................................................................................................. 41

Administration ................................................................................................41AMR-0001 – Assets Mgmt. & Reliability Solutions: Fundamentals – Field Advisor Administration....................................................................................................... 41

AMR-0002 – Assets Mgmt. & Reliability Solutions: Fundamentals – DOC4000 Configuration and Administration ................................................................................. 41

Maintenance ...................................................................................................41AMR-DOC4000A – Asset Mgmt. & Reliability Solutions: DOC4000 Advanced User and Troubleshooting and Maintenance ............................................................. 41

CONTROL PERFORMANCE MONITOR .............................................................43

Implementation ..............................................................................................44CPM-0002 – Control Performance Monitor: Fundamentals - Regulatory User Implementation .................................................................................................................... 44

ADMINISTRATION .........................................................................................44CPM-0001 – Control Performance Monitor: Fundamentals – System Administration ...................................................................................................................... 44

OPERATIONS MANAGEMENT AND PRODUCTION MANAGEMENT ..........46

Implementation ..............................................................................................47OMPM-02 – Operations Mgmt. & Production Mgmt.: Fundamentals – Operations Management Implementation ................................................................. 47

OMPM-4570 – Operations Mgmt. & Production Mgmt.: Fundamentals – Business Hiway XML Service (R200) Implementation ........................................... 47

OMPM-4571 – Operations Mgmt. & Production Mgmt.: Fundamentals – Workcenter (R200) Implementation ............................................................................ 47

OMPM-5801 – Operations Mgmt. & Production Mgmt.: Fundamentals – LIMS/QM Implementation ............................................................................................... 47

OMPM-5802 – Operations Mgmt. & Production Mgmt.: Fundamentals – Production Balance Implementation ............................................................................ 47

OMPM-BC02 – Operations Mgmt. & Production Mgmt.: Fundamentals – BizCalc Manager Implementation ................................................................................. 48

OMPM-KP02 – Operations Mgmt. & Production Mgmt.: Fundamentals – KPI (Key Point Indicators) Manager Implementation ..................................................... 48

OMPM-LI02 – Operations Mgmt. & Production Mgmt.: Fundamentals – LIMS Implementation .................................................................................................................... 48

OMPM-PB02 – Operations Mgmt. & Production Mgmt.: Fundamentals – Production Balance Implementation ............................................................................ 48

OMPM-WC02 – Operations Mgmt. & Production Mgmt.: Fundamentals – Workcenter (PlusPack) Implementation ...................................................................... 48


OPERATOR TRAINING AND SIMULATION ......................................................50

Implementation ..............................................................................................51OTS-0002 – Operator Training & Simulation: Fundamentals – UniSim Configuration Implementation ....................................................................................... 51

OTS-0003 – Operator Training & Simulation: Fundamentals – UniSim Run Time Graphics Using HMIWeb Implementation ....................................................... 51

OTS-0006 – Operator Training & Simulation: Fundamentals – UniSim Experion Implementation ................................................................................................. 51

Administration ................................................................................................51OTS-0004 – Operator Training & Simulation: Fundamentals – UniSim System Manager Administration ................................................................................................... 51

Operation .........................................................................................................52OTS-0001 – Operator Training & Simulation: Fundamentals – UniSim Instructor Operation ........................................................................................................... 52

OTS-0007-AT – Operator Training & Simulation: Fundamentals - Distillation Operation ................................................................................................................................ 52

OTS-0008-AT – Operator Training & Simulation: Fundamentals - Hydrotreating Unit Operation ......................................................................................... 52

OTS-0009-AT – Operator Training & Simulation: Fundamentals - Fired Heater Operation ................................................................................................................................ 52

OTS-0010-AT – Operator Training & Simulation: Fundamentals - Centrifugal Compressor Operation ....................................................................................................... 52

PROCESS SIMULATION .......................................................................................54PDS-0001 – Process Simulation: Fundamentals – Flare System Modelling Using UniSim Flare ............................................................................................................. 55

PDS-110 – Process Simulation: Fundamentals – Process Modelling Using UniSim Design Refining Industry Focus ...................................................................... 55

PDS-130 – Process Simulation: Fundamentals – Process Modelling Using UniSim Design Chemical Industry Focus .................................................................... 55

PDS-400 – Process Simulation: Fundamentals – Developing Extensions for UniSim Design ...................................................................................................................... 55

PDS-4526 – Process Simulation: Fundamentals – Process Modelling Using UniSim Design ...................................................................................................................... 55

PDS-4527 – Process Simulation: Advanced – Process Modelling Using UniSim Design ...................................................................................................................................... 56

PDS-4528 – Process Simulation: Fundamentals – Dynamic Modelling Using UniSim Design ..................................................................................................................... 56

PROFIT BLENDING & MOVEMENT ...................................................................58

Maintenance ...................................................................................................59PBM-0001 – Profit Blending & Movement: Fundamentals - Profit Blend Controller (PBC) Maintenance ........................................................................................ 59

PBM-0002 – Profit Blending & Movement: Fundamentals - Profit Inventory Monitor (PIM) Maintenance ............................................................................................ 59

PBM-0003 – Profit Blending & Movement: Fundamentals - Profit Movement Management (PMM) Maintenance ............................................................................... 59

PBM-0004 – Profit Blending & Movement: Fundamentals - Profit Blend Optimizer (PBO) Maintenance ........................................................................................ 59

PBM-0008 – Profit Blending & Movement: Fundamentals - Profit Movement Management – Movement Monitor (PMM-MM) Maintenance ........................... 59

PBM-0009 – Profit Blending & Movement: Fundamentals - Profit Movement Management – Movement Control (PMM-MC) Maintenance ............................. 60

PRODUCT CONTROL CENTER ...........................................................................62

Implementation ..............................................................................................63PCC-010 – Production Control Center: Fundamentals – PCC Implementation .......................................................................................................... 63

PCC-020 – Production Control Center: Advanced – PCC Implementation .... 63

Administration ................................................................................................63PCC-02 – Production Control Center: Fundamentals – Capacity and Distribution Planner (CDP) Configuration and Administration ........................... 63

UNIFORMANCE PHD ............................................................................................65

Implementation ..............................................................................................66UNI-0001-WS – Uniformance PHD: Fundamentals – Installation on Clusters Implementation -Workshop ............................................................................................. 66

UNI-5749 – Uniformance PHD: Fundamentals – Desktop Tools and Visual PHD End User Implementation ...................................................................................... 66

UNI-5767-WS – Uniformance PHD: Fundamentals – Experion Integration Implementation -Workshop ............................................................................................. 66

UNI-5768 – Uniformance PHD: Fundamentals – Process Studio Implementation .................................................................................................................... 66

UNI-5700-VT – Uniformance PHD: Fundamentals – Desktop Tools End User Implementation .................................................................................................................... 66

UNI-US02 – Uniformance PHD: Fundamentals – System Monitor Implementation .................................................................................................................... 67

Administration ................................................................................................67UNI-0002 – Uniformance PHD: Fundamentals – Process Studio and System Administration ...................................................................................................................... 67

UNI-5747 – Uniformance PHD: Fundamentals – System Administration ...... 67

CONTROLEDGE .....................................................................................................69

Implementation ..............................................................................................70CTE-0001-AT – ControlEdge: Fundamentals - PLC (with Experion Integration) Implementation .................................................................................................................... 70

CTE-0002-AT – ControlEdge: Fundamentals - RTU (with Experion Integration) Implementation .................................................................................................................... 70

EXPERION LX ........................................................................................................72

Implementation ..............................................................................................73ELX-0001 – Experion LX: Fundamentals - Configuration, Graphics Building and Control Strategy Implementation ......................................................................... 73

ELX-0002 – Experion LX: Advanced - Configuration, Graphics Building and Control Strategy Implementation .................................................................................. 73

Table of Contents 5

EXPERION MX .......................................................................................................75

Implementation ..............................................................................................76EMX-0002 – Experion MX: Advanced - MD Multivariable Controls Implementation .................................................................................................................... 76

EMX-0003 – Experion MX: Advanced - MD Grade Change Implementation 76

EMX-0006 – Experion MX: Advanced - CDMultivariable Controls Implementation .................................................................................................................... 76

Maintenance ...................................................................................................76EMX-0001 – Experion MX: Fundamentals – Scanner Setup and Maintenance ................................................................................................................. 76

EMX-0004 – Experion MX: Advanced - Cross Direction Controls Maintenance ....................................................................................................... 76

EXPERION PKS ......................................................................................................78

Overview ..........................................................................................................80EXP-6000 – Experion PKS: Fundamentals – System Overview .......................... 80

EXP-1003 – Experion PKS: Fundamentals – TPS to Experion Planning, Implementation, and Troubleshooting Overview ..................................................... 80

EXP-1018-RT – Experion PKS: Fundamentals - Virtualization Premium Platform FX2 Overview ...................................................................................................... 80

EXP-1021 – Experion PKS: Fundamentals – TPS to Experion PKS/Experion LCN System Integration Overview ................................................................................. 80

Implementation ..............................................................................................81EXP-02 – Experion PKS: Fundamentals – Server Engineering and Configuration Implementation ....................................................................................... 81

EXP-03 – Experion PKS: Fundamentals – Graphics Design and Building Implementation .................................................................................................................... 81

EXP-16 – Experion PKS: Fundamentals – Control Execution Environment CAB + ACE Implementation ....................................................................................................... 81

EXP-2001 – Experion PKS: Fundamentals – Control Execution Environment Controller Implementation ............................................................................................... 81

EXP-2001C3 – Experion PKS: Fundamentals – C300 Controller Implementation .................................................................................................................... 82

EXP-2001UOC – Experion PKS: Fundamentals – UOC Controller Implementation .................................................................................................................... 82

EXP-21 – Experion PKS: Fundamentals – Experion Batch Manager (EBM) – Instance Based Recipes Implementation .................................................................... 82

EXP-24 – Experion PKS: Fundamentals – Controller Fieldbus Configuration Implementation .................................................................................................................... 82

EXP-30 – Experion PKS: Advanced – Field Device Manager (FDM) Implementation and Troubleshooting .......................................................................... 82

EXP-48 – Experion PKS: Fundamentals – Virtualization Implementation ...... 83

EXP-50 – Experion PKS: Fundamentals – Configuration, Graphics Building and Control Strategy Implementation ......................................................................... 83

EXP-90 – Experion PKS: Advanced – On-Process Migration Implementation ....................................................................... 83

EXP-1011 – Experion PKS: Advanced – Class Based Recipes Implementation ........................................................................... 83

EXP-1015 – Experion PKS: Fundamentals – Basic Networking Concepts and FTE Implementation ........................................................................................................... 83

EXP-1016 – Experion PKS: Fundamentals – OPC Concepts and Implementation .................................................................................................................... 84

EXP-1022 – Experion PKS: Fundamentals – Experion LCN (ELCN) Network Migration Implementation ............................................................................................... 84

Differences ......................................................................................................84EXP-17-RT – Experion PKS: Fundamentals – Server Differences ...................... 84

EXP-18-RT – Experion PKS: Fundamentals – Controller Differences .............. 84

EXP-19-RT – Experion PKS: Fundamentals – HMIWeb Differences ................. 84

EXP-1010-RT – Experion PKS: Fundamentals – R400 Operating System Differences ............................................................................................................................. 84

Administration ................................................................................................85EXP-23 – Experion PKS: Advanced – Server and Station Installation and Administration ...................................................................................................................... 85

EXP-1002 – Experion PKS: Fundamentals – ESVT and ES-T Administration 85

EXP-1014 – Experion PKS: Advanced – Server and Station (Non LCN-Connected) Installation and Administration .............................................................. 85

Operation .........................................................................................................85EXP-01 – Experion PKS: Fundamentals – Controller Operation ........................ 85

EXP-12 – Experion PKS: Fundamentals – TPS Operation ..................................... 85

EXP-13 – Experion PKS: Fundamentals – Controller and TPS Operation ...... 86

EXP-26 – Experion PKS: Fundamentals – SCADA Operation .............................. 86

EXP-1007 – Experion PKS: Fundamentals – Operations for LNG Carriers .... 86

Maintenance ...................................................................................................86EXP-05 – Experion PKS: Fundamentals – Controller/SCADA Troubleshooting and Maintenance ................................................................................................................. 86

EXP-05C3 – Experion PKS: Fundamentals – C300 Troubleshooting and Maintenance ......................................................................................................................... 86

EXP-05C3S – Experion PKS: Fundamentals – C300/SCADA Troubleshooting and Maintenance ................................................................................................................. 87

EXP-05C2 – Experion PKS: Fundamentals – C200/C200E Troubleshooting and Maintenance ................................................................................................................. 87

EXP-25 – Experion PKS: Advanced – System Level Troubleshooting and Maintenance ......................................................................................................................... 87

FAIL SAFE CONTROLLER ....................................................................................89

Overview ..........................................................................................................90FSC-4501 – Fail Safe Controller: Fundamentals – Managers Overview .......... 90

Implementation ..............................................................................................90FSC-4502 – Fail Safe Controller: Fundamentals – On-line Modification Implementation .................................................................................................................... 90

FSC-4508 – Fail Safe Controller: Fundamentals – Implementation ................. 90

FSC-4512 – Fail Safe Controller: Advanced – Implementation .......................... 90


Maintenance ...................................................................................................90FSC-4505 – Fail Safe Controller: Fundamentals – Maintenance....................... 90

FIRE DETECTION SYSTEMS ...............................................................................92

Implementation ..............................................................................................93FDS-0001 – Fire Detection Systems: Fundamentals – XLS140/XLS3000 System Programming, Commissioning and Implementation .............................. 93

HC900 .....................................................................................................................95

Implementation ..............................................................................................96HC-0001 – HC900: Fundamentals – Controller and Control Station Implementation .................................................................................................................... 96

HC-0002-AT – HC900: Fundamentals – Hybrid Controller and Control Station Implementation .................................................................................................................... 96

HC-0003 – HC900: Fundamentals – Controller Implementation .................... 96

MASTERLOGIC ......................................................................................................98

Implementation ..............................................................................................99ML-1001 – MasterLogic: Fundamentals – 200R Implementation ................... 99

MATRIKONOPC .................................................................................................. 101

Implementation ........................................................................................... 102MOPC-0007-WS – MatrikonOPC: Fundamentals - OPC Classic and Real World Architectures Implementation - Workshop .............................................................. 102

MOPC-0008-WS – MatrikonOPC: Fundamentals - OPC Unified Architecture Implementation - Workshop ......................................................................................... 102

MOPC-0009-WS – MatrikonOPC: Fundamentals - Industrial Cyber Security for OPC Implementation - Workshop ......................................................................... 102

MXPROLINE ........................................................................................................ 104

Implementation ........................................................................................... 105MXP-03 – MXProLine: Fundamentals – System Implementation .................. 105

MXP-04 – MXProLine: Fundamentals – System MD and CD Controls Implementation ................................................................................................................. 105

Maintenance ................................................................................................ 105MXP-0008 – MXProLine: Fundamentals – ZipLine Scanning Measurement Device Maintenance ........................................................................................................ 105

MXP-06 – MXProLine: Fundamentals – Scanner and Sensor Maintenance 105

PMD ...................................................................................................................... 107

Overview ....................................................................................................... 108PMD-0001 – PMD: Fundamentals – New Releases Features Overview ....... 108

PMD-70 – PMD: Fundamentals – New Features of TotalPlant Alcont – PMD Upgrade Overview ............................................................................................................ 108

Implementation ........................................................................................... 108PMD-0002 - PMD: Advanced - PROFINET Interfaces Implementation ....... 108

PMD-0003 - PMD: Fundamentals - Virtualization Implementation ............. 108

PMD-20 – PMD: Fundamentals – Applications Implementation .................... 108

PMD-22 – PMD: Fundamentals – Applications Advanced Implementation ................................................................................................................. 108

PMD-24 – PMD: Fundamentals – HMIWeb Display Builder Implementation ................................................................................................. 109

PMD-42 – PMD: Advanced – Profibus Interfaces Implementation ................ 109

Operation ...................................................................................................... 109PMD-01 – PMD: Fundamentals – User Operation ................................................ 109

Maintenance ................................................................................................ 109PMD-30 – PMD: Fundamentals – Maintenance ................................................... 109

PMD-32 – PMD: Advanced – Maintenance............................................................. 109

PMD-NET01 – PMD: Fundamentals – Local Area Networks Maintenance ............................................................................. 109

PRINTA ................................................................................................................. 111

Implementation ........................................................................................... 112PRI-03 – Printa: Fundamentals – PMS – Production Planning Implementation .............................................................................................. 112

PRI-05 – Printa: Fundamentals – PMS – Production Management Implementation ................................................................................................................. 112

PRI-20 – Printa: Fundamentals – Applications Implementation ..................... 112

Operation ...................................................................................................... 112PRI-01 – Printa: Fundamentals – Operation .......................................................... 112

MAINTENANCE ........................................................................................... 112PRI-30 – Printa: Fundamentals – Maintenance .................................................... 112

PULPING .............................................................................................................. 114

Maintenance ................................................................................................ 115PUL-2314 – Pulping: Fundamentals – Pulp Sensor Maintenance ................. 115

RC500 RTU .......................................................................................................... 117

Implementation ........................................................................................... 118RC-0001 – RC500 RTU: Fundamentals – RC500 Implementation with Experion PKS Integration .............................................................................................. 118

RC-0002 – RC500 RTU: Fundamentals – RC500 Implementation .............. 118

RTU2020 ............................................................................................................. 120

Implementation .......................................................................................... 121RTU-0001-AT - RTU2020: Fundamentals - RTU2020 (with Experion Integration) Implementation ........................................................................................ 121

Table of Contents 7

SAFETY MANAGER ............................................................................................ 123

Overview ....................................................................................................... 124SM-4553 – Safety Manager: Fundamentals – Overview ................................... 124

Implementation ........................................................................................... 124SM-4551 – Safety Manager: Fundamentals – Implementation ...................... 124

SM-4554 – Safety Manager: Fundamentals – On-Line Modification Implementation ................................................................................................................. 124

SM-4555 – Safety Manager: Advanced – Implementation ............................... 124

Operation ...................................................................................................... 124SM-4552 – Safety Manager: Fundamentals – Operation .................................. 124

Maintenance ................................................................................................ 125SM-4550 – Safety Manager: Fundamentals – Maintenance ............................ 125

SAFETY MANAGER SC ...................................................................................... 127

Overview ....................................................................................................... 129SMSC-0004 – Safety Manager SC: Fundamentals – Overview ........................ 129

Implementation ........................................................................................... 129SMSC-0001 – Safety Manager SC: Fundamentals – Implementation .......... 129

SMSC-0005 – Safety Manager SC: Fundamentals – On-Line Modification Implementation ................................................................................................................. 129

SMSC-0006 – Safety Manager SC: Advanced – Implementation ................... 129

Operation ...................................................................................................... 129SMSC-0003 – Safety Manager SC: Fundamentals – Operation ...................... 129

Maintenance ................................................................................................ 130SMSC-0002 – Safety Manager SC: Fundamentals – Maintenance ................ 130

SAFETY MANAGEMENT SYSTEMS ................................................................ 132

Certification ................................................................................................. 133SMS-4503-CT – Safety Mgmt. Systems: Certification – TÜV Functional Safety Program IEC 61508 SIL ............................................................ 133

TDC ........................................................................................................................ 135

Implementation ........................................................................................... 137TDC-3300HPM – TDC: Fundamentals – (US) LCN/UCN with HPM Implementation ................................................................................................................. 137

TDC-3300HRF – TDC: Fundamentals – (US) LCN/UCN with HPM Implementation – Refresher ......................................................................................... 137

TDC-3301 – TDC: Fundamentals – (US) Picture Editor Graphics Building Implementation ................................................................................................................. 137

TDC-3310UCN – TDC: Fundamentals – (US) Application Module with UCN Implementation ................................................................................................................. 137

TDC-3754HPM – TDC: Fundamentals – (US) HPM Points and CL Implementation ................................................................................................................. 137

TDC-3754HRF – TDC: Fundamentals – (US) HPM Points and CL Implementation – Refresher ......................................................................................... 138

TDC-3757HPM – TDC: Fundamentals – (US) UCN/HPM Points and CL Implementation ................................................................................................................. 138

TDC-3757HRF – TDC: Fundamentals – (US) UCN/HPM Points and CL Implementation – Refresher ......................................................................................... 138

TDC-3754HRF – TDC: Fundamentals – (US) HPM Points and CL Implementation – Refresher ......................................................................................... 138

TDC-3757HPM – TDC: Fundamentals – (US) UCN/HPM Points and CL Implementation ................................................................................................................. 138

TDC-3757HRF – TDC: Fundamentals – (US) UCN/HPM Points and CL Implementation – Refresher ......................................................................................... 138

Operation ...................................................................................................... 139TDC-3302 – TDC: Fundamentals – (US) Picture Editor Graphics Building for Plant Operation ................................................................................................................. 139

TDC-5900 – TDC: Fundamentals – (US) LCN/UCN Operation ........................ 139

Maintenance ................................................................................................ 139TDC-3670 - TDC: Fundamentals – (US) EC/CB/PIU Maintenance ............... 139

TDC-3755HPM – TDC: Fundamentals – (US) HPM Configuration and Maintenance ...................................................................................................................... 139

TDC-512 – TDC: Fundamentals – Hiway Maintenance ...................................... 139

Implementation ........................................................................................... 140APS-PS02 – Adv. Planning & Scheduling: Fundamentals – Production Scheduler Implementation ............................................................................................ 140

TPA ........................................................................................................................ 141

Implementation ........................................................................................... 142TPA-20 – TPA: Fundamentals – Control and Logic Implementation ............. 142

TPA-22 – TPA: Fundamentals – Control and Logic Advanced Implementation ............................................................................................ 142

TPA-24 – TPA: Fundamentals – Displays Implementation ................................ 142

TPA-25 – TPA: Fundamentals – Effective Application Engineering Implementation ................................................................................................................. 142

TPA-26 – TPA: Fundamentals – Cyclic Pascal Implementation ....................... 142

TPA-27 – TPA: Advanced – Event-Driven Pascal Implementation .................. 142

TPA-28 – TPA: Advanced – Toolbox Applications Implementation ................. 143

Operation ...................................................................................................... 143TPA-01 – TPA: Fundamentals – Operation .............................................................. 143

Maintenance ................................................................................................ 143TPA-30 – TPA: Fundamentals – Hardware and Maintenance ........................... 143

TPA-32 – TPA: Advanced – Troubleshooting and Maintenance ....................... 143

TPA-42 – TPA: Fundamentals – Profibus Interfaces Maintenance ................. 143


TPS ........................................................................................................................ 145

Overview ....................................................................................................... 147TPS-0002 – TPS: Fundamentals – DCS Overview ................................................ 147

TPS-0004 – TPS: Fundamentals – LCN/UCN Overview..................................... 147

TPS-5738 – TPS: Fundamentals – (GUS) LCN/UCN Overview ........................ 147

TPS-PT035 – TPS: Fundamentals – LCN Introduction Overview .................... 147

Implementation ........................................................................................... 147TPS-0005 – TPS: Fundamentals - LCN Configuration Implementation ...... 147

TPS-0006 – TPS: Fundamentals - Point Building and UCN/HPM Implementation ................................................................................................................. 148

TPS-0007 – TPS: Fundamentals – HPM Points & CL Configuration and Implementation ................................................................................................................ 148

TPS-0008 – TPS: Fundamentals - APP Node AM/CL Implementation ........ 148

TPS-0009 – TPS: Fundamentals - Picture Editor Graphics Building Implementation ................................................................................................................ 148

TPS-3816 – TPS: Advanced – Optimization Techniques For The LCN and UCN Implementation ............................................................................ 148

TPS-5711 – TPS: Fundamentals – Native Window/GUS Display Builder/Safeview Implementation .............................................................................................. 149

TPS-5713 – TPS: Fundamentals – GUS Native Window Implementation .... 149

TPS-5716 – TPS: Fundamentals – (GUS) HPM Points and CL Implementation .......................................................................................................... 149

TPS-5716RF-FT – TPS: Fundamentals – (GUS) HPM Points and CL Implementation - Refresher .......................................................................................... 149

TPS-5722 – TPS: Fundamentals – (GUS) LCN/UCN Implementation .......... 149

TPS-5722RF – TPS: Fundamentals – (GUS) LCN/UCN Implementation – Refresher ......................................................................................... 150

TPS-5723 – TPS: Fundamentals – GUS Display Builder and Safeview Implementation ................................................................................................................. 150

TPS-5729 – TPS: Fundamentals – (GUS) UCN/HPM Points and CL Implementation ................................................................................................................. 150

TPS-5729RF – TPS: Fundamentals – (GUS) UCN/HPM Points and CL Implementation – Refresher ......................................................................................... 150

TPS-5756 – TPS: Fundamentals – (GUS) APP Node AM/CL Implementation ................................................................................................................. 150

TPS-PT030 – TPS: Fundamentals – LCN Implementation ................................ 151

TPS-PT031 – TPS: Fundamentals – AM Implementation .................................. 151

TPS-PT065 – TPS: Fundamentals – HPM Implementation ............................... 151

TPS-PT070 – TPS: Fundamentals – Custom Functions Implementation ..... 151

TPS-PT710 – TPS: Fundamentals – Global User Station (GUS) System Implementation ................................................................................................................. 151

TPS-PT720 – TPS: Fundamentals – Global User Station (GUS) Display Building Implementation ............................................................................... 151

Administration ............................................................................................. 152TPS-PT3376A – TPS: Advanced – LCN and UCN Management Administration ................................................................................................................... 152

Operation ...................................................................................................... 152TPS-5725 – TPS: Fundamentals – Process Control for Plant Operation ...... 152

TPS-5726 – TPS: Fundamentals – (GUS) Problem Isolation for Plant Operation .......................................................... 152

TPS-5770 – TPS: Fundamentals – (GUS) LCN/UCN Operation ...................... 152

TPS-PT075 – TPS: Fundamentals – LCN Operation ............................................ 152

Maintenance ................................................................................................ 153TPS-0014 – TPS: Fundamentals – LCN and Advance Cable Maintenance 153

TPS-0015 – TPS: Fundamentals – UCN/HPM and Advance Cable Maintenance ..................................................................................................................... 153

TPS-4601 – TPS: Advanced – Cable Maintenance............................................... 153

TPS-4750 – TPS: Fundamentals – (GUS/US) APM/HPM Troubleshooting and Maintenance ...................................................................................................................... 153

TPS-4770 – TPS: Fundamentals – (GUS/US) LCN Maintenance .................... 153

TPS-5739 – TPS: Fundamentals – (GUS) LCN/UCN/HPM Maintenance .... 154

TPS-PT080 – TPS: Fundamentals – LCN/APM/HPM Maintenance .............. 154

WEB MONITORING SYSTEMS ........................................................................ 156

Maintenance ................................................................................................ 157WMS-0001 – Web Monitoring System: Fundamentals – WMS 4G Maintenance .................................................................................................... 157

GAS PRESSURE REGULATION ........................................................................ 159

Overview ....................................................................................................... 160HGT-0001 – HGT: Fundamentals – Gas Pressure Regulation and Safety Devices Overview .............................................................................................................. 160

HGT-0002 – HGT: Fundamentals – Gas Pressure Regulation and Safety Devices Engineering Planning ..................................................................................... 160

Implementation ........................................................................................... 160HGT-0003 – HGT: Fundamentals – Gas Pressure Regulation and Safety Devices “M” – Groups 300/400 Implementation ................................................ 160

HGT-0004 – HGT: Fundamentals – Gas Pressure Regulation and Safety Devices – Automation Systems Implementation ................................................... 160

HGT-0006 – HGT: Fundamentals – Underground Compact Units Implementation ................................................................................................................. 161

HGT-0007 – HGT: Fundamentals – Gas Pressure Regulation and Safety Devices – Intensive Course No. 1 Implementation ............................................... 161




Operation ...................................................................................................... 162HGT-0005 – HGT: Fundamentals – Gas Odourizing Plants Operation ......... 162

Table of Contents 9

INDUSTRIAL APPLICATIONS/TOPICS .......................................................... 164

Industrial Topics .......................................................................................... 164

Overview ....................................................................................................... 165INDT-0002 – Industrial Topics: Fundamentals – Data Communications and Control Networks Overview ............................................... 165

INDT-0008-AT – Industrial Topics: Fundamentals - Power and Grounding Overview .................................................................................. 165

INDT- REFECON – Industrial Topics: Fundamentals – Refinery Economics Overview ...................................................................................... 165

INFORMATION SYSTEMS SOLUTIONS ......................................................... 167

INFORMATION SYSTEMS ................................................................................. 167

Overview ....................................................................................................... 168IS-OSS8003 – Information Systems: Fundamentals – Plant Security Governance and Management Overview ................................................................. 168

Implementation ........................................................................................... 168IS-1110 – Information Systems: Fundamentals – Networking Implementation ......................................................................................... 168

IS-1111 – Information Systems: Fundamentals – FTE/CISCO Implementation ......................................................................................... 168

IS-OSS8001 – Information Systems: Fundamentals – Process Control Network Design Implementation .................................................................................................. 168

IS-OSS8002 – Information Systems: Fundamentals – Security Incident Handling Implementation ............................................................................................. 168

Administration ............................................................................................. 169IS-2273 – Information Systems: Fundamentals – Windows 2003 Server Configuration and Administration .............................................................................. 169

TERMINAL AUTOMATION ................................................................................ 171

ENRAF .................................................................................................................. 171

Maintenance ................................................................................................ 172ENR-ST1-TG – Enraf: Fundamentals – Tank Gauging Instruments Maintenance ................................................................. 172

ENR-ST2-TG – Enraf: Fundamentals – Tank Gauging Instruments Maintenance ................................................................. 172

ENR-ST3-TG – Enraf: Fundamentals – Tank Gauging Instruments Maintenance ................................................................. 172

ENR-ST1-TI – Enraf: Fundamentals – Tank Inventory Systems Maintenance....................................................................... 172



UOP ....................................................................................................................... 175

Implementation ........................................................................................... 176UOP-0001-S – UOP: Fundamentals – Engineering Design Seminar (EDS) Implementation........................................... 176

UOP-0002-S – UOP: Fundamentals – Process Design Implementation – Seminar ............................................................. 176

UOP-0004-S – UOP: Fundamentals – HF Alkylation Process Implementation – Seminar ................................................ 176

UOP-0005-S – UOP: Fundamentals – Butamer Process Implementation – Seminar ......................................................... 176

UOP-0006-S – UOP: Fundamentals – CCR Platforming Process – Standard for CycleMax and Atmospheric Implementation – Seminar ..................................... 176

UOP-0007-S – UOP: Advanced – CCR Platforming Process Implementation – Seminar ......................................... 177

UOP-0008-S – UOP: Fundamentals – Fixed-Bed Platforming Process Implementation – Seminar ............................. 177

UOP-0009-S – UOP: Fundamentals – Fluid Catalytic Cracking (FCC) Standard Process Implementation – Seminar ......................... 177

UOP-0010-S – UOP: Advanced – Fluid Catalytic Cracking (FCC) Process Implementation – Seminar ............... 177

UOP-0013-S – UOP: Fundamentals – Unicracking Process Implementation – Seminar .................................................. 177

UOP-0014-WS – UOP: Fundamentals – Platforming Simulator Troubleshooting and Implementation – Workshop............................................... 178

UOP-0015-WS – UOP: Fundamentals – Fluid Catalytic Cracking (FCC) Process Simulator Troubleshooting and Implementation – Workshop .......................... 178

WIRELESS ............................................................................................................ 180

Onewireless .................................................................................................. 180

Overview ....................................................................................................... 181OW-0001-LW – OneWireless: Fundamentals – Integration Overview .......... 181

Implementation ........................................................................................... 181OW-0002 – OneWireless: Fundamentals – ISA100 Wireless System Implementation ................................................................................................................. 181


IntroductionHONEYWELL PROCESS SOLUTIONS (HPS) TRAINING – YOUR PARTNER IN EXCEEDING PERFORMANCE GOALS

HPS Training and our exceptional faculty and staff wish to extend you a warm welcome. Whether you are a returning student, just beginning your training plan or taking advantage of our online-enrichment courses, HPS Training offers you a quality learning experience designed to empower you to advance your education, career opportunities and personal goals.

Our training solutions are designed to help you and/or your employees become more productive and proactive while delivering greater value to your operations. Our courses are targeted to meet your organizational needs and are delivered in the most convenient and cost-effective format. Our team is available to work closely with you and your staff to define a comprehensive training program which can be conducted at your site to meet your companies training needs.

The Global HPS Training courses listed in our brochure are categorized by training product/program and identified by different colours. Each course description includes an overview plus duration, course equivalency, prerequisite course (s), and delivery options. For additional schedule information, please visit https://www.honeywellprocess.com/en-US/training/ or contact the training coordinator at the corresponding course venue.

HPS TRAINING VISION

Provide world class design and delivery of learning solutions that enable our customers and employees to maximize the value of our customers’ technology investment.

GLOBAL HPS TRAINING ORGANIZATION:

• Americas Pole – US, Canada and Latin America

• EMEA Pole – Europe, Middle East and Africa

• AP Pole – Asia Pacific

Training Centers 11

Americas EMEA Asia Pacific

51514

7

8

4

18

16

6

2710

12

19

2

3

1

9

11

23

24

13

25

26

22

Denotes Major Locations

17

20

21

Country State City 1 Australia Brisbane

2 Australia Perth

3 Australia Sydney

4 Belgium Brussels

5 Canada Alberta Edmonton

6 China Tianjin

7 Finland Varkaus

8 France Paris

9 Germany Brandenburg

10 India Pune

11 Kuwait Mina Abdulla

12 Malaysia Selangor Petaling Jaya

13 Mexico Mexico City

Country State City14 Netherlands Amsterdam

15 Netherlands Rosmalen

16 New Zealand Auckland

17 Russia Moscow

18 Saudi Arabia Dhahran

19 Singapore Singapore

20 South Africa Johannesburg

21 South Africa Secunda

22 South Korea Cheonan

23 United Arab Emirates Dubai

24 United Kingdom Manchester

25 United States of America Arizona Phoenix

26 United States of America Texas Houston

27 Vietnam Ba Ria City

Training Centers


Training Product / ProgramHoneywell Process Solutions training solutions offer comprehensive ranges of training on Honeywell products that helps participants improve their plant safety, reliability, and efficiency.

Create value through HPS training solutions to improve employee performance, reduce cost of unscheduled downtime, minimize human errors, and respond faster to issues.

Training Product Training Program

Advanced Applications

Adv. Alarm Mgmt. Operations Mgmt. & Production Mgmt.

Adv. Planning & Scheduling Operator Training & Simulation

Adv. Process Control Process Simulation

Asset Mgmt. & Reliability Solutions Product Control Center

Advanced Solutions Uniformance PHD

Control Perfomance Monitor

Profit Blending & Movement

Control Monitoring and Safety Systems

Experion HS/LS Printa

Experion MX Pulping

Fail Safe Controller RC500 RTU

Experion PKS Safety Manager SC

Fire Detection Systems Safety Mgmt. Systems

HC900 TDC

MasterLogic TPA

MatrikonOPC TPS

MXProLine WMS

PMD

Gas Pressure Regulation HGT

Industrial Applications/Topics Industrial Topics

Information Systems Solutions Information Systems

Terminal Automation Enraf

UOP UOP

Wireless OneWireless

Training Model 13

Training Model

Automation College

Training Model

Customer Certification Program

Tailored or Custom Courses

Train the Trainer

Refresher

Standard Courses

In-Center or On-Site

Training Needs Assessment

Self-Paced with Instructor Courses

Regional

Instructor-Led Classroom Courses

E-Learning

Blended Learning

E-LEARNING

• Online training delivered when and where you require

BLENDED LEARNING

• Delivery of Blended Learning (BL) courses will be a combination of Asynchronous Training (AT) and Instructor-Led Training (ILT) deliveries

• The AT delivery (eLearning) will be in the form of highly interactive lectures, presentations, demonstrations, and exercises to convey concepts

• The ILT delivery will be in the classroom with expert instructions, demonstrations, and practice of hands-on exercises and tasks

IN-CENTER FLEXTRAINING™ OR SELF-PACED TRAINING

• A self-study environment with frequent instructor learning checks so students progress at own pace

• Dedicated workstations that enable hands-on experience with practical and real-world examples/exercises

• Instructor is always available to assist you

• Courses can be modified to meet your exact job functions and expectations

IN-CENTER INSTRUCTOR-LED TRAINING

• Classroom environment with small group of students, each with dedicated workstation to encourage interaction

• Expert instructors utilizing advanced training methodologies

CUSTOMIZED COURSES

• New course materials developed to address your unique needs and site requirements

• May customize standard training materials to include information specific to the process automation system installed at your facility


TAILORED COURSES

• Standard training materials can be repackaged to meet your learning objectives

• Focused course content for specific standard hardware and software functionality matching your system architecture

• Cost effectiveness by focusing on applicable course materials

ON-SITE TRAINING

• Our classroom comes to your facility, including training equipment, database, materials and expert instructor

• Instructional programs that integrate into your work environment, reduce travel expense and time away from work

• Cost-effective way of providing training to a larger group of students whose normal work time or locations may prevent them from attending scheduled courses at a Honeywell facility

REGIONAL TRAINING

• Instructor-led training, held at a location near you

• Open enrollment or specific to your company

REFRESHER TRAINING

• Offers regular and periodic programs for operators, technicians, and engineers

• Maintains and enhances job skills

• Provides an effective method of staying current with your new releases

TRAIN THE TRAINER

• Invest in your own internal training function

• Reinforce ongoing training on a regular basis

• Effective way to prepare and certify your staff instructor to conduct Honeywell licensed courses

TRAINING NEEDS ASSESSMENT

• Understands the gaps in knowledge and required skills to efficiently and safely manage your plant automation assets

• Provides a clear picture of your installed systems and training requirements which enables a more focused and effective training investment

• Presents a comprehensive training plan based on the evaluation of your workforce and automation investment

CUSTOMER CERTIFICATION PROGRAM

• An optional low cost program that allows students to take examinations at the conclusion of selected training course(s)

• Students earn “Certified Associate,” “Certified Professional” or “Certified Specialist” rankings in specific product tracks

• HPS certification will provide evidence to managers that employees not only attended a course, but gained comprehensive and specific knowledge

• The program allows students demonstrate their mastery of course material

E-Learning Solutions 15

E-Learning SolutionsHoneywell experts use the latest web conferencing technology to bring “just-in-time” training to your work environment. These affordable and flexible options minimize time away from home and scheduled work. Take a single course to update skills or incorporate e-Learning courses as part of a comprehensive training program.

1. VIRTUAL INSTRUCTOR-LED TRAINING (VILT)

Virtual Instructor-Led courses offer the same content as standard courses. Participants will have full time ‘live’ instructor lectures, but participants and trainer may not be in the same physical location. Training delivery consisting of recorded lectures, demonstration videos, electronic course documentation, and access to remote servers for hands-on practice and lab assignments are provided for establish scheduled dates.• Daily Instructor-Led lectures with real time presentations• Daily course progress goals• Electronic course documentation• 24-hour access to remote servers for hands-on practice and completion of lab assignments

2. ASYNCHRONOUS TRAINING (AT)

Asynchronous courses offer the same content as Instructor-Led (ILT) courses. Participants are provided access to training materials via recorded lectures, demonstration videos, electronic course documentation along with questions and answers addressed via a designated mailbox and 24-hour access to remote servers for hands-on practice and lab assignments for an extended amount of time over the Instructor-Led (ILT) course duration.• Recorded lectures with demonstration videos• Electronic course documentation• 24-hour access to remote servers for hands-on practice and completion of lab assignments for a specified period of time• Email access to an Automation College mailbox for questions occurring during course work

3. RECORDED TRAINING (RT)

Recorded courses are self-paced training that focus on specific topics. You have the ability to access all or part of the courses as often as you wish for a specified duration.


Customer Certification Program

Customer Certification Program 17

Customer Certification ProgramAutomation College has designed a certification program for verifying that students have successfully mastered the content of key courses.

The certification program is organized on three principles:

1. HPS Product lines: Experion PKS, Safety Manager, TotalPlant Solution, and Uniformance PHD

2. Customer roles: Installation, Administration, Operation, and Maintenance

3. Certification level:

a. Certification level: Associate (fundamental knowledge of the core product)

Associate certification requires the completion of any prerequisites, completion of a specified Automation College course, and successful completion of a proctored examination. Students normally register for the examination to be conducted at the completion of the associated course, but can register for the certification at any time. Registration allows candidates two attempts to pass an examination within a 30-day period. If not successful, candidates must wait at least 30 days, and re-register for the certification.

18 2020 Global HPS Training Catalogue

FLOWCHART FOR HONEYWELL CERTIFIED ASSOCIATE COURSES

Experion PKS Honeywell Certified Associate

Pre-

requ

isite

C

ours

esIm

plem

enta

tion

Cer

tific

atio

n

Implementation Course

Adminstration Course

Pre-

requ

isite

C

ours

esO

verv

iew

Cer

tific

atio

n

Overview Course

EXP-6000-CTExperion PKS: Fundamentals -

System Overview -Certified Associate

1. (EXP-6000 or EXP-6000-AT or EXP-6000-VT)

Pre-

requ

isite

C

ours

esO

pera

tion

Cer

tific

atio

n

Operation Course

Pre-

requ

isite

C

ours

esM

aint

enan

ceC

ertif

icat

ion

Maintenance Course


Controller/SCADA Troubleshooting and

Maintenance -Certified Associate

1. ((EXP-05 or EXP-05-AT)

Experion PKS: Fundamentals – C300 Troubleshooting and

Maintenance - Certified Associate

EXP-05C3-CT

1. (EXP-05C3 or EXP-05C3-AT)

1. (EXP-25 or EXP-25-AT)

Pre-

requ

isite

C

ours

es

(EXP-23 or EXP-23-AT)

EXP-1021-CTExperion PKS: Fundamentals –TPS to Experion PKS/Experion

LCN System Integration Associate

1. (EXP-1021 or EXP-1021-AT)



1. (EXP-1022 or EXP-1022-AT)


1. EXP-24 1. EXP-30(EXP-48 or

EXP-48-AT or EXP-48-VILT or

EXP-48-VT)

EXP-02-CT Experion PKS:

Fundamentals - Server

Engineering and Configuration

Implementation - Certified

Associate


Fundamentals - Controller

Operation - Certified Associate


Fundamentals - TPS Operation - Certified

Associate


Fundamentals - Controller and TPS

Operation - Certified Associate


Fundamentals - SCADA Operation - Certified Associate


Advanced - System Level Troubleshooting

and Maintenance – Certified Associate

EXP-23-CT Experion PKS: Advanced -

Server and Station Installation and

Administration – Certified Associate


Graphics Design and Building


Associate

EXP-1022-CTExperion PKS: Fundamentals –Experion LCN (ELCN) Network

Migration Implementation -

Certified Associate

EXP-2001-CTExperion PKS: Fundamentals

-Control Execution

Environment Controller


Associate

EXP-24-CTExperion PKS: Fundamentals

-Controller Fieldbus

Configuration Implementation -

Certified Associate

EXP-30-CTExperion PKS:

Advanced -Field Device Manager

(FDM) Implementation

and Trouble-shooting - Certified

Associate


Fundamentals - Virtualization


Associate

Adm

inst

ratio

nC

ertif

icat

ion

1. (EXP-01 orEXP-01-AT orEXP-01-VT)

1. EXP-12 1. EXP-13 1. (EXP-26 or EXP-26-AT)


SAFETY MANAGER HONEYWELL CERTIFIED ASSOCIATE

Pre

-req

uis

ite

Co

urs

esIm

ple

men

tati

on

Cer

tifi

cati

on


Pre

-req

uis

ite

Co

urs

esO

verv

iew

Cer

tifi

cati

on

Overview Course


Fundamentals – System Overview – Certified

Associate


Pre

-req

uis

ite

Co

urs

esO

per

atio

nC

erti

fica

tio

n

Operation Course


Fundamentals -Server Engineering and

Configuration Implementation – Certified Associate

1. (EXP-02 or EXP-02-AT or EXP-02-FT or

EXP-02-VT)


Fundamentals – Graphics Design and

Building Implementation – Certified Associate

Associate1. (EXP-03 or EXP-03-AT or EXP-03-FT or

EXP-03-VT)

EXP-01-CTExperion PKS: Fundamentals –

Controller Operation –Certified Associate

1. (EXP-01 orEXP-01-AT orEXP-01-VT)


Fundamentals – Control Execution Environment

Controller Implementation – Certified Associate

1. (EXP-2001 or EXP-2001-AT or EXP-2001-FT

or EXP-2001-VT)

Pre

-req

uis

ite

Co

urs

esM

ain

ten

ance

Cer

tifi

cati

on

Maintenance Course

EXP-05-CTExperion PKS: Fundamentals –

Controller/SCADATroubleshooting

and Maintenance –Certified Associate

1. (EXP-05 or EXP-05C3 or EXP-05C3S or EXP-05C2)

EXP-12-CTExperion PKS: Fundamentals –TPS Operation –

Certified Associate

1. EXP-12

Pre

-req

uis

ite

Co

urs

esIm

plem

enta

tion

Cer

tifi

cati

on


SM-4551-CTSafety Manager:Fundamentals -Implementation -

Certified Associate

1. SM-4551

Pre

-req

uis

ite

Co

urs

esM

ain

ten

ance

Cer

tifi

cati

on

Maintenance Course

SM-4550-CTSafety Manager:Fundamentals -Maintenance -

Certified Associate

1. SM-4550

TOTALPLANT SOLUTION (TPS) HONEYWELL CERTIFIED ASSOCIATE

Pre-

requ

isite

C

ours

esIm

plem

enta

tion

Cer

tific

atio

n


Pre-

requ

isite

C

ours

esO

verv

iew

Cer

tific

atio

n

Overview Course

TPS-0004-CTTPS: Fundamentals –LCN/UCN Overview –

Certified Associate

1. TPS-0004

Pre-

requ

isite

C

ours

esO

pera

tion

Cer

tific

atio

n

Maintenance Course

TPS-0005-CTTPS:

Fundamentals -LCN Configuration Implementation –

Certified Associate

TPS-0006-CTTPS:

Fundamentals - Point Building and UCN/HPM

Implementation –Certified Associate

TPS-0014-CTTPS:

Fundamentals – LCN and Advance Cable Maintenance –

Certified Associate

TPS-0015-CTTPS: Fundamentals –

UCN/HPM and Advance Cable Maintenance –

Certified Associate

1. TPS-0005

1. TPS-0014 1. TPS-0015

1. TPS-0006 1. TPS-0007 1. TPS-0008 1. TPS-0009

TPS-0008-CTTPS: Fundamentals -

APP Node AM/CL Implementation –

Certified Associate

TPS-0009-CTTPS: Fundamentals -

Picture Editor Graphics Building Implementation

– Certified Associate

TPS-0007-CTTPS: Fundamentals –

HPM Points & CL Configuration and Implementation –

Certified Associate


UNIFORMANCE PHD HONEYWELL CERTIFIED ASSOCIATE

Pre-

requ

isite

C

ours

esA

dmin

istr

atio

nC

ertif

icat

ion

Administration Course

1. UNI-5747 1. UNI-0002

UNI-5747-CTUniformance PHD:

Fundamentals – System Administration –

Certified Associate

UNI-0002-CTUniformance PHD:

Fundamentals – Process Studio and System Administration –

Certified Associate


EXPERION PKS HONEYWELL CERTIFIED ASSOCIATE

OVERVIEWEXP-6000-CT – Experion PKS: Fundamentals - System Overview - Certified Associate

Duration 4 hours

Course Equivalency • None

Prerequisite course (s) (EXP-6000 or EXP-6000-AT or EXP-6000-VT)

Overview The HPS Automation College Certification program provides a means for students to demonstrate that they have mastered the content of critical courses.

Delivery Options • In-Center at a Honeywell Automation College facility• On-Site at a customer facility

EXP-1021-CT – Experion PKS: Fundamentals - TPS to Experion PKS/Experion LCN System Integration Overview - Certified Associate

Duration 4 hours


Prerequisite course (s) (EXP-1021 or EXP-1021-AT)


Delivery Options • In-Center at a Honeywell Automation College facility

IMPLEMENTATIONEXP-02-CT – Experion PKS: Fundamentals - Server Engineering and Configuration Implementation - Certified Associate

Duration 4 hours



Overview The HPS Automation College Certification program provides a means for students todemonstrate that they have mastered the content of critical courses.


EXP-03-CT – Experion PKS: Fundamentals - Graphics Design and Building Implementation – Certified Associate

Duration 4 hours





EXP-1022-CT – Experion PKS: Fundamentals - Experion LCN (ELCN) Network Migration Implementation - Certified Associate

Duration 4 hours






EXP-2001-CT – Experion PKS: Fundamentals – Control Execution Environment Controller Implementation – Certified Associate

Duration 4 hours


Prerequisite course (s) EXP-2001 or EXP-2001-AT or EXP-2001-VT



EXP-2001C3-CT – Experion PKS: Fundamentals – C300 Controller Implementation – Certified Associate

Duration 4 hours


Prerequisite course (s) EXP-2001C3 or EXP-2001C3-AT



EXP-2001UOC-CT – Experion PKS: Fundamentals – UOC Controller Implementation – Certified Associate

Duration 4 hours


Prerequisite course (s) EXP-2001UOC or EXP-2001UOC-AT



EXP-24-CT – Experion PKS: Fundamentals – Controller Fieldbus Configuration Implementation – Certified Associate

Duration 4 hours


Prerequisite course (s) EXP-24



EXP-30-CT – Experion PKS: Advanced – Field Device Manager (FDM) Implementation and Troubleshooting – Certified Associate

Duration 4 hours






EXP-48-CT – Experion PKS: Fundamentals - Virtualization Implementation - Certified Associate

Duration 4 hours


Prerequisite course (s) (EXP-048 or EXP-48-AT or EXP-48-VILT or EXP-48-VT)



ADMINISTRATIONEXP-23-CT – Experion PKS: Advanced – Server and Station Installation and Administration Certified Associate

Duration 4 hours





OPERATIONEXP-01-CT – Experion PKS: Fundamentals – Controller Operation – Certified Associate

Duration 4 hours


Prerequisite course (s) EXP-01 or EXP-01-AT or EXP-01-VT



EXP-12-CT – Experion PKS: Fundamentals – TPS Operation – Certified Associate

Duration 4 hours





EXP-13-CT – Experion PKS: Fundamentals – Controller and TPS Operation – Certified Associate

Duration 4 hours






EXP-26-CT – Experion PKS: Fundamentals - SCADA Operation - Certified Associate

Duration 4 hours


Prerequisite course (s) EXP-26 or EXP-26-AT



MAINTENANCEEXP-05-CT – Experion PKS: Fundamentals – Controller/SCADA Troubleshooting And Maintenance – Certified Associate

Duration 4 hours





EXP-05C3-CT – Experion PKS: Fundamentals – C300 Troubleshooting And Maintenance – Certified Associate Duration 4 hours


Prerequisite course (s) (EXP-05C3 or EXP-05C3-AT)



EXP-25-CT – Experion PKS: Advanced – System Level Troubleshooting and Maintenance – Certified Associate

Duration 4 hours





SAFETY MANAGER CERTIFIED ASSOCIATE

IMPLEMENTATION SM-4551-CT – Safety Manager: Fundamentals – Implementation – Certified Associate

Duration 4 hours


Prerequisite course (s) SM-4551




MAINTENANCE SM-4550-CT – Safety Manager: Fundamentals – Maintenance – Certified Associate

Duration 4 hours


Prerequisite course (s) SM-4550



TOTALPLANT SOLUTION (TPS) CERTIFIED ASSOCIATE

OVERVIEWTPS-0004-CT – TPS: Fundamentals – LCN/UCN Overview - Certified Associate

Duration 4 hours


Prerequisite course (s) (TPS-0004 or TPS-0004-AT or TPS-0004-FT)



IMPLEMENTATIONTPS-0005-CT – TPS: Fundamentals - LCN Configuration Implementation - Certified Associate

Duration 4 hours





TPS-0006-CT – TPS: Fundamentals - Point Building and UCN/HPM Implementation - Certified Associate

Duration 4 hours





TPS-0007-CT – TPS: Fundamentals – HPM Points & CL Configuration and Implementation - Certified AssociateDuration 4 hours






TPS-0008-CT – TPS: Fundamentals - APP Node AM/CL Implementation - Certified Associate Duration 4 hours





TPS-0009-CT – TPS: Fundamentals - Picture Editor Graphics Building Implementation - Certified Associate Duration 4 hours





MAINTENANCE TPS-0014-CT – TPS: Fundamentals – LCN and Advance Cable Maintenance - Certified Associate Duration 4 hours


Prerequisite course (s) (TPS-0014 or TPS-0014-AT)



TPS-0015-CT – TPS: Fundamentals – UCN/HPM and Advance Cable Maintenance - Certified Associate Duration 4 hours


Prerequisite course (s) (TPS-0015 or TPS-0015-AT)



UNIFORMANCE PHD HONEYWELL CERTIFIED ASSOCIATE

MAINTENANCEUNI-5747-CT – Uniformance PHD: Fundamentals – System Administration – Certified Associate Duration 4 hours


Prerequisite course (s) UNI-5747


Delivery Options • In-Center at a Honeywell Automation College facility • On-Site at a customer facility

UNI-0002-CT – Uniformance PHD: Fundamentals – Process Studio and System Administration – Certified Associate Duration 4 hours


Prerequisite course (s) UNI-0002


Delivery Options • In-Center at a Honeywell Automation College facility • On-Site at a customer facility

Advanced Applications


Advanced ApplicationsADVANCED ALARM MANAGEMENT

Poor alarm management is often a key factor leading to incidents and accidents at process plants, resulting in high financial costs and sometimes, even loss of life. Honeywell offers training courses that include best practices needed to design and engineer a good alarm system as well as a software course to assist in effective usage of Advanced Alarm Management tools.

FLOWCHART FOR ADVANCED ALARM MANAGEMENT COURSES

Pre

-req

uis

ite

Co

urs

esA

dm

inis

trat

ion


AAM-4426Adv. Alarm Mgmt.:

Fundamentals -Installation &

SystemAdministration


Fundamentals -Installation &

System Administration

Pre

-req

uis

ite

Co

urs

esIm

ple

men

tati

on



Fundamentals -Effective Usage Implementation


Fundamentals -Best Practices,

Techniques and ToolsImplementation


Fundamentals –DynAMo Installation

and System Administration


Fundamentals -DynAMo Effective

Usage Implementation

Advanced Applications 29

IMPLEMENTATIONAAM-0004 – Adv. Alarm Mgmt.: Fundamentals – DyaNMo Effective Usage ImplementationDuration 4 days


Prerequisite course (s) • None

Overview This course provides participants an introduction to the configuration and usage of the DynAMo product suite. The participants will gain the skills and knowledge to optimize Operator effectiveness and eliminate incidents or reduce their impact.

Delivery Options • In-Center Instructor-Led Training • On-Site Instructor-Led Training

AAM-4425 – Adv. Alarm Mgmt.: Fundamentals – Effective Usage ImplementationDuration 4 days



Overview Course participants will gain the skills and knowledge to optimize operator effectiveness and eliminate incidents or reduce their impact.


AAM-4542 – Adv. Alarm Mgmt.: Fundamentals – Best Practices, Techniques and Tools ImplementationDuration 2.5 days



Overview Course participants will gain an understanding of the best practices in Alarm Management and the techniques and tools needed to apply them.


ADMINISTRATIONAAM-0003 – Adv. Alarm Mgmt.: Fundamentals – DyaNMo Installation & System AdministrationDuration 4 days



Overview This course provides participants an introduction to the configuration and maintenance of the DynAMo product suite. The participants will gain the skills and knowledge to install, configure, and maintain DynAMo Alarm Suite.

Delivery Options • In-Center Instructor-Led Training

AAM-4426 – Adv. Alarm Mgmt.: Fundamentals – Installation & System AdministrationDuration 4 days



Overview Course participants will gain the skills and knowledge required to install and configure AAM applications.


AAM-4572 – Adv. Alarm Mgmt.: Fundamentals – OM Pro AdministrationDuration 7 days



Overview Course participants will acquire an in-depth knowledge relating to OMPro concepts and individual modules, enabling them to use and maintain their OMPro systems efficiently and providing basic user training to the shift operation team.



Advanced Planning and Scheduling

Advanced Planning and Scheduling 31

Advanced Planning and SchedulingAdvanced Planning and Scheduling products align the production plan with corporate objectives, prepare an optimal plan, transform it into a production schedule, and establish operational targets for meeting the schedule. These products also enable optimum feedstock selection, better yields and margins, and feasible schedules that maximize throughput. Honeywell’s Advanced Planning and Scheduling training courses help participants make effective use of these products for efficient operations planning, supply and distribution optimization, operations scheduling, blending optimization, and performance monitoring.

FLOWCHART FOR ADVANCED PLANNING AND SCHEDULING COURSES

Pre

-req

uis

ite

Co

urs

esIm

ple

men

tati

on


APS-PS02Adv. Planning &

Scheduling: Fundamentals -

Production Scheduler Implementation


IMPLEMENTATIONAPS-PS02 – Adv. Planning & Scheduling: Fundamentals – Production Scheduler Implementation

Duration 4 days



Overview Course participants will learn the configuration and administration of Production Scheduler and its fit in real world solutions.


Advanced Process Control


Advanced Process ControlAdvanced Process Control (APC) products address all aspects of advanced process control and optimization from improving regulatory loop control to globally optimizing the entire process using a unique layered approach. This model allows new technologies to be easily added at any time to a common platform that meets optimization objectives without compromising on future opportunities to improve business performance. Delivered through the unified Experion® Process Knowledge System (PKS) architecture, Honeywell’s APC products improve profitability by increasing throughput, reducing costs, increasing yields and improving product quality.

FLOWCHART FOR ADVANCED PROCESS CONTROL COURSES

Pre-

requ

isite

C

ours

esPr

e-re

quis

ite

Cou

rses

Impl

emen

tatio

nM

aint

enan

ce


Maintenance Course

1. APC-4516

APC-4516Adv. Process Control:

Fundamentals - Profit Controller Implementatio


Fundamentals -Inferential Modeling With Profit Sensor Pro Implementation


Fundamentals -Profit NLC Design for

Polymer Plants Implementation


Fundamentals -Profit Controller

Maintenance

1. APC-4516


Advanced - Profit Controller and Profit

Optimizer Implementation

Advanced Process Control 35

IMPLEMENTATIONAPC-0001 – Adv. Process Control: Advanced – Profit Controller and Profit Optimizer Implementation

Duration 4.5 days


Prerequisite course (s) • APC-4516

Overview Course participants will learn new and advanced features of the Profit Controller and Profit Optimizer for improved performance.

Delivery Options • In-Center Instructor-Led Training• On-Site Instructor-Led Training

APC-0002 – Adv. Process Control: Fundamentals – Profit NLC Design for Polymer Plants Implementation

Duration 4.5 days



Overview Course participants will learn the basics of Profit®NLC technology and its application to the polymer process industry.


APC-4516 – Adv. Process Control: Fundamentals – Profit Controller Implementation

Duration 4.5 days



Overview Course participants will learn the multivariable predictive control design and implementation using Profit Controller software.


APC-4522 – Adv. Process Control: Fundamentals – Inferential Modeling With Profit Sensor Pro Implementation

Duration 3.5 days



Overview Course participants will acquire a fundamental understanding of the design and implementation of Steady State Inferential Models also referred to as Soft Sensors.


MAINTENANCEAPC-4523 – Adv. Process Control: Fundamentals – Profit Controller Maintenance

Duration 4.5 days


Prerequisite course (s) • APC-4516

Overview Course participants will learn to evaluate and improve the performance of Profit Controller applications, and to adjust the application models and tuning parameters for improved controller performance.



Advanced Solutions

Advanced Process Control 37

Advanced SolutionsHoneywell Alarm Manager: Honeywell Alarm Manager training helps participants understand how to monitor historical and real-time alarm and event data, how to configure and maintain the system, and how to evaluate the adherence of an alarm system to industry best practices.

Matrikon Operational Insight: Honeywell Operational Insight training is aimed at guiding participants in using the Honeywell Operational Insight tools to create custom displays for their data, including schematics, animations, trends, and custom reports. Participants also learn how to configure notifications and administer the system.

Honeywell Control Performance Monitor: The training is focused on helping participants configure and use the Analysis Designer, email notifications, and Web reports to effectively diagnose control loop problems, assign responsibility, and track progress.

FLOWCHART FOR ADVANCED SOLUTIONS COURSES

Pre

-req

uisi

te

Cou

rses

Ope

ratio

n

Operation Course

MTKS-0001-ATAdvanced Solutions:

Fundamentals -Alarm Manager

Operation


Fundamentals -Operational Insight

Operation


Fundamentals -Control Performance

Monitor Operation


OPERATIONMTKS-0001-AT – Advanced Solutions: Fundamentals – Alarm Manager Operation

Duration 2 hours



Overview Course participants will learn how to use Honeywell Alarm Manager and Honeywell Alarm Manager MOC to:• Monitor historical and real-time alarm and event data• Track changes to alarm settings• Evaluate how well an alarm system adheres to industry best practices• Configure alarms in a way that maximizes plant performance

Delivery Options • Asynchronous Training (AT)

MTKS-0002-AT – Advanced Solutions: Fundamentals – Operational Insight Operation

Duration 2 hours



Overview Course participants will learn how to use the Operational Insight tool to:• Display data in graphics and animations • Create time-based trends from real-time and historical tag data sources• Ensure the right people are always notified when site conditions change • Create custom reports• Administer and grant access to the system


MTKS-0003-AT – Advanced Solutions: Fundamentals – Control Performance Monitor Operation

Duration 1 hour



Overview Course participants will learn how to use Control Performance Monitor to identify, diagnose, and remedy control asset issues.


Asset Management and Reliability Solutions


Asset Management and Reliability SolutionsHoneywell offers a comprehensive package of Asset Management and Reliability solutions to monitor assets ranging from field devices to process units. Its integrated solutions increase process uptime, asset availability, and user productivity. Operational field data and diagnostic data are integrated with a decision support system that interfaces directly with work processes.

FLOWCHART FOR ASSET MANAGEMENT AND RELIABILITY SOLUTIONS COURSES

Pre

-req

uis

ite

Co

urs

esA

dm

inis

trat

ion


AMR-0001Assets Mgmt. &

Reliability Solutions: Fundamentals -Field Advisor Administration

AMR-0002Assets Mgmt. &

ReliabilitySolutions:

Fundamentals –DOC4000

Configuration andAdministration

Pre

-req

uis

ite

Co

urs

esIm

ple

men

tati

on


AMR-4524Asset Mgmt. &

Reliability Solutions: Fundamentals -Asset ManagerImplementation

Pre

-req

uis

ite

Co

urs

esM

ain

ten

ance

Maintenance Course

AMR-DOC4000AAsset Mgmt. &

Reliability Solutions: DOC4000 Advanced

User and Troubleshooting and Maintenance

Asset Management and Reliability Solutions 41

IMPLEMENTATIONAMR-4524 – Asset Mgmt. & Reliability Solutions: Fundamentals – Asset Manager Implementation

Duration 3 days



Overview Course participants will learn to use Asset Manager as a tool to manage their work processes and reduce production disruptions through reliability centered maintenance.


ADMINISTRATIONAMR-0001 – Assets Mgmt. & Reliability Solutions: Fundamentals – Field Advisor Administration

Duration 3 days



Overview Course participants will learn the key components and functions of the Field Advisor, including configuration workflows, system administration and common interfaces.


AMR-0002 – Assets Mgmt. & Reliability Solutions: Fundamentals – DOC4000 Configuration and Administration

Duration 4 days



Overview Course participants will learn all aspects of the configuration, administration, and troubleshooting of DOC4000 for Experion® Process Knowledge System (PKS) and TotalPlant® Solution (TPS) System.


MAINTENANCEAMR-DOC4000A – Asset Mgmt. & Reliability Solutions: DOC4000 Advanced User and Troubleshooting and Maintenance

Duration 2 days



Overview Course participants will learn the various functionalities and capabilities of DOC4000, including a detailed review of accessing system data, search, printing capabilities and advanced query generation.



Control Performance Monitor

Control Performance Monitor 43

Control Performance MonitorControl Performance Monitor (CPM) monitors all assets present in a process plant, whether it is advanced process control or regulatory loop control. It creates a workflow in improving regulatory loop control to globally optimizing the entire process using a unique layered approach. It prevents the expensive ‘Run to failure’ or Regular Preventative Maintenance model to a successful management plan which improves efficiency while reducing total cost of ownership. Delivered through the platform independent technology enabling monitoring various technologies under same umbrella.

FLOWCHART FOR CONTROL PERFORMANCE MONITOR COURSES

Pre-

requ

isite

C

ours

esIm

plem

enta

tion


CPM-0002Control Performance

Monitor: Fundamentals –

Regulatory User Implementation

Pre-

requ

isite

C

ours

esA

dmin

istr

atio

n


CPM-0001Control Performance

Monitor: Fundamentals –

System Administration


IMPLEMENTATIONCPM-0002 – Control Performance Monitor: Fundamentals - Regulatory User Implementation

Duration 3 days



Overview After a brief introduction to CPM Standard installation, various configuration using Configurator will be presented. The Analysis Designer, Messaging Service, Common Asset Model (CAM), Data Access Services (DAS) plugin, embedded PHD, SQL databases will be explained. How to use and configure CPM web report for analyzing, filtering and benchmarking reports will then be covered.


ADMINISTRATIONCPM-0001 – Control Performance Monitor: Fundamentals – System Administration

Duration 1.5 days



Overview This course provides a comprehensive user guidance after deploying CPM Standard. The course takes the user through CPM KPIs and help Process Engineers and Process Control Engineers how to make use of them.


Control Performance Monitor 45

Operations Management and Production Management


Operations Management and Production ManagementHoneywell’s Operations Management products help improve operations and plant performance by systematically setting and communicating operating plans, monitoring process data against limits, and highlighting deviations. By providing a better understanding of performance versus industry norms, and knowledge of true operating limits for better reliability and agility, the solution helps reduce energy use while improving yield, product consistency, and run lengths. In addition, Honeywell provides complete laboratory information management system capabilities and integration to existing lab systems.

Honeywell’s Production Management products are optimized to improve management of production output, quality, and performance by tracking, determining, and reporting production and gross profitability, identifying discrete product batches and their genealogy, and calculating the manufacturing cost of products. In addition, graphical configuration tools provide easier implementation and reduce the overall cost of ownership.

Honeywell offers training courses that include best practices to improve product quality and provide easier implementation.

FLOWCHART FOR OPERATIONS MANAGEMENT AND PRODUCTION MANAGEMENT COURSES

Pre

-req

uisi

te

Cou

rses

Impl

emen

tatio

n


1. UNI-5747

OMPM-BC02Operations Mgmt. & Production Mgmt.:

Fundamentals -BizCalc ManagerImplementation

OMPM-KP02Operations Mgmt. & Production Mgmt.:

Fundamentals - KPI (Key Point Indicators)

Manager Implementation

OMPM-WC02Operations Mgmt. & Production Mgmt.:

Fundamentals -Workcenter (PlusPack)

Implementation

OMPM-LI02Operations Mgmt. & Production Mgmt.:

Fundamentals -LIMS Implementation

OMPM-PB02Operations Mgmt. &Production Mgmt.:

Fundamentals -Production Balance

Implementation

OMPM-5801Operations Mgmt. & Production Mgmt.:

Fundamentals -LIMS/QM

Implementation


Fundamentals - BusinessHiway XML Service

(R200) Implementation

OMPM-5802Operations Mgmt. &Production Mgmt.:

Fundamentals -Production Balance

Implementation


Fundamentals -Workcenter (R200)

Implementation

OMPM-02Operations Mgmt. &Production Mgmt.:

Fundamentals -Operations Management

Implementation

Operations Management and Production Management 47

IMPLEMENTATIONOMPM-02 – Operations Mgmt. & Production Mgmt.: Fundamentals – Operations Management Implementation

Duration 2 days



Overview Course participants will learn the skills to use and understand the Operations Management Suite of Applications.


OMPM-4570 – Operations Mgmt. & Production Mgmt.: Fundamentals – Business Hiway XML Service (R200) Implementation

Duration 4 days



Overview Course participants will learn the concepts of BizTalk and XML Service, and how to leverage the Experion® Application Framework (EAF) in XML Service.


OMPM-4571 – Operations Mgmt. & Production Mgmt.: Fundamentals – Workcenter (R200) Implementation

Duration 2 days



Overview Course participants will gain a full understanding of the purpose and reasons for the use of Experion® Application Framework (EAF), services and components which are part of Workcenter, data management used by Workcenter, and more.


OMPM-5801 – Operations Mgmt. & Production Mgmt.: Fundamentals – LIMS/QM Implementation

Duration 3.5 days


Prerequisite course (s) • UNI-5747

Overview Course participants will get intensive training on how to successfully implement the LIMS QM application from planning through commissioning.


OMPM-5802 – Operations Mgmt. & Production Mgmt.: Fundamentals – Production Balance Implementation

Duration 5 days



Overview Course participants will get intensive training on how to successfully implement the Production Balance application from planning through commissioning.



OMPM-BC02 – Operations Mgmt. & Production Mgmt.: Fundamentals – BizCalc Manager Implementation

Duration 2 days



Overview Course participants will learn the configuration/ administration of the BizCalc Manager Application, and how to create calculations.


OMPM-KP02 – Operations Mgmt. & Production Mgmt.: Fundamentals – KPI (Key Point Indicators) Manager Implementation

Duration 2 days



Overview Course participants will learn the Configuration and Administration of KPI manager. KPI Manager is designed to integrate into the BusinessFLEX® suite of products from Honeywell.


OMPM-LI02 – Operations Mgmt. & Production Mgmt.: Fundamentals – LIMS Implementation

Duration 4 days



Overview Course participants will learn the configuration and administrative aspects of the Information Management System (LIMS).


OMPM-PB02 – Operations Mgmt. & Production Mgmt.: Fundamentals – Production Balance Implementation

Duration 5 days



Overview Course participants will learn the skills to implement, configure, and use Production Balance to solve yield accounting anomalies.


OMPM-WC02 – Operations Mgmt. & Production Mgmt.: Fundamentals – Workcenter (PlusPack) Implementation

Duration 4 days



Overview Course participants will gain mastery of the Workcenter environment through HMI Display Builder for Workcenter Plus Pack and Workcenter Parameter settings.


Operator Training and Simulation


Operator Training and SimulationTraining operators and engineers on how to respond during upset conditions helps reduce potential incidents. Furthermore, well-trained personnel react more quickly and diffuse process situations before incidents occur. Experience has shown that simulators train new hires more quickly and efficiently than traditional methods.

UniSim® Operations Suite helps prepare operators for initial and sustained plant operation. Improved profit recognition and business performance is ensured by additional days of production achieved through safe, reliable and efficient plant operation. UniSim Operations Suite Training Courses provide hands-on experience with the UniSim Operations Suite interface and features. UniSim Operations Training Simulators rigorously model, evaluate and enhance performance of plant assets (operators, procedures and controls) prior to initial operations and throughout the plant lifecycle.

FLOWCHART FOR OPERATOR TRAINING AND SIMULATION COURSES

Pre

-req

uisi

teC

ours

esO

pera

tion

Operation Course

OTS-0001Operator Training &

Simulation: Fundamentals -

UniSim Instructor Operation

OTS-0008-ATOperator Training &

Simulation: Fundamentals-

Hydrotreating Unit Operation

Pre

-req

uisi

teC

ours

esA

dmin

istr

atio

n


OTS-0004Operator Training &

Simulation:Fundamentals - UniSim System

Manager Administration

Pre

-req

uisi

teC

ours

esIm

plem

enta

tion


OTS-0002Operator Training

& Simulation:Fundamentals -

UniSim ConfigurationImplementation

OTS-0003Operator Training

& Simulation:Fundamentals - UniSim Run Time

Graphics Using HMIWebImplementation

OTS-0006OTS-0006 – Operator Training & Simulation:

Fundamentals -UniSim Experion Implementation

1. OTS-0001 and2. OTS-0002


Simulation: Fundamentals-Fired Heater

Operation


Simulation: Fundamentals –

Centrifugal Compressor Operation


Simulation: Fundamentals-

Distillation Operation

Operator Training and Simulation 51

IMPLEMENTATIONOTS-0002 – Operator Training & Simulation: Fundamentals – UniSim Configuration Implementation

Duration 3 days



Overview Course participants will gain the skills that will allow them to maintain the simulation model at the heart of the OTS, as well as receive guidance on how a UniSim® Design model can be deployed in an OTS context.


OTS-0003 – Operator Training & Simulation: Fundamentals – UniSim Run Time Graphics Using HMIWeb Implementation

Duration 2 days



Overview Course participants will learn to maintain and develop UniSim® Operations Instructor Graphics.


OTS-0006 – Operator Training & Simulation: Fundamentals – UniSim Experion Implementation

Duration 3 days


Prerequisite course (s) • OTS-0001• OTS-0002

Overview Course participants will gain hands-on experience with the UniSim Operations Suite and Experion interface.


ADMINISTRATIONOTS-0004 – Operator Training & Simulation: Fundamentals – UniSim System Manager Administration

Duration 2 days



Overview Course participants will learn how to maintain a UniSim® Operations Operator Training Simulator to ensure system reliability.



OPERATIONOTS-0001 – Operator Training & Simulation: Fundamentals – UniSim Instructor Operation

Duration 3 days



Overview Course participants will understand the UniSim® Operations Suite interface and features.


OTS-0007-AT – Operator Training & Simulation: Fundamentals - Distillation Operation

Duration 5 days



Overview Course participants will improve their distillation operations knowledge and skills. Course lessons and exercises build on basic process knowledge with practical examples using high fidelity process simulation.

Delivery Options • Asynchronous Training

OTS-0008-AT – Operator Training & Simulation: Fundamentals - Hydrotreating Unit Operation

Duration 5 days



Overview Course participants will improve their hydrotreating unit operations knowledge and skills. Course lessons and exercises build on basic process knowledge with practical examples using high fidelity process simulation.


OTS-0009-AT – Operator Training & Simulation: Fundamentals - Fired Heater Operation

Duration 3 days



Overview Course participants will improve their fired heater operations knowledge and skills. Course lessons and exercises build on basic process knowledge with practical examples using high fidelity process simulation.


OTS-0010-AT – Operator Training & Simulation: Fundamentals - Centrifugal Compressor Operation

Duration 3 days



Overview Course participants will improve their centrifugal compressor operations knowledge and skills. Course lessons and exercises build on basic process knowledge with practical examples using high fidelity process simulation.


Operator Training and Simulation 53

Process Simulation


Process SimulationThe UniSim® family of software products improves plant performance and overall business results for the process industry. UniSim Design is an intuitive and interactive process modelling offering that enables engineers to create steady-state and dynamic models for plant design, performance monitoring, troubleshooting, operational improvement, business planning and asset management.

Technical training for UniSim Design Suite comprises:

• Industry focused introductory courses for steady state modelling with UniSim Design

• Advanced steady state modelling with UniSim Design

• Dynamic modelling with UniSim Design

• Developing kinetic reaction and steady state unit operation extensions for UniSim Design using Visual Basic

• Flare system modelling with UniSim Flare

Honeywell offers training courses that include best practices to implement UniSim Design.

FLOWCHART FOR PROCESS SIMULATION COURSES

Pre

-req

uis

ite

Co

urs

esP

roce

ss

Sim

ula

tio

n

Process Simulation Course

PDS-4527Process Simulation:

Advanced -Process Modelling

UsingUniSim Design


Fundamentals -Process Modelling

Using UniSim Design

1. PDS-45261. PDS-4526


Fundamentals -Dynamic

Modelling Using UniSim Design



Using UniSim DesignChemical Industry Focus



Using UniSim Design Refining Industry Focus


Fundamentals -Developing Extensions

for UniSim Design


Fundamentals –Flare System

Modelling UniSim Flare

Process Simulation 55

PDS-0001 – Process Simulation: Fundamentals – Flare System Modelling Using UniSim Flare

Duration 1 day



Overview Course participants will learn how to use UniSim Flare for design, rating and debottlenecking calculations.


PDS-110 – Process Simulation: Fundamentals – Process Modelling Using UniSim Design Refining Industry Focus

Duration 2 days



Overview Course participants will learn how to build, evaluate and optimize steady state process flowsheets using UniSim® Design, including techniques and shortcuts for efficient use of the program to build steady state simulations of refining processes.


PDS-130 – Process Simulation: Fundamentals – Process Modelling Using UniSim Design Chemical Industry Focus

Duration 2 days



Overview Course participants will learn how to build, evaluate and optimize steady state process flowsheets using UniSim® Design, including techniques and shortcuts for efficient use of the program to build steady state simulations of chemical processes.


PDS-400 – Process Simulation: Fundamentals – Developing Extensions for UniSim Design

Duration 2 days


Prerequisite course (s) • PDS-4526

Overview Course participants will learn about Extensibility in UniSim® Design and how to build customized Kinetic Reaction and Unit Operation models for steady state simulation using Visual Basic.


PDS-4526 – Process Simulation: Fundamentals – Process Modelling Using UniSim Design

Duration 2 days



Overview Course participants will learn how to build, evaluate and optimize steady state process flowsheets using UniSim Design, as well as learn techniques and shortcuts for efficient use of the program.



PDS-4527 – Process Simulation: Advanced – Process Modelling Using UniSim Design

Duration 2 days



Overview Course participants will learn how to use and apply advanced modelling techniques to enhance existing UniSim Design models.


PDS-4528 – Process Simulation: Fundamentals – Dynamic Modelling Using UniSim Design

Duration 3 days



Overview Course participants will learn how to develop the skills and understanding required for creating and running dynamic simulations using UniSim Design Dynamics.


Process Simulation 57

Profit Blending and Movement


Pre-

requ

isite

C

ours

esM

aint

enan

ce

Maintenance Course

PBM-0001Profit Blending &

Movement: Fundamentals -Profit

Blend Controller (PBC) Maintenance

PBM-0002Profit Blending & Movement:

Fundamentals -Profit Inventory

Monitor (PIM) Maintenance

PBM-0004Profit Blending & Movement:

Fundamentals -Profit Blend

Optimizer (PBO) Maintenance


Movement: Fundamentals -Profit Movement

Management (PMM) Maintenance

1. PBM-0008


Movement: Fundamentals -Profit Movement Management -

Movement Monitor(PMM-MM)

Maintenance


Movement: Fundamentals -Profit Movement Management -

Movement Control(PMM-MC)

Maintenance

Profit Blending & MovementBy delivering complete planning, execution, and performance monitoring of blending and movement operations, Honeywell’s blending and movement products optimize in-line blending and improve safety and reliability of off-sites, terminal and tank farm operations to increase plant profitability and minimize incidents. These products provide and execute formulations that meet inventory constraints, delivery schedules, and product specifications, while also facilitating data analysis and determining key performance indicators.

Honeywell offers training courses that include best practices to improve operations. These business training solutions are designed to help participants become more productive and proactive while delivering greater value to operations and help maximize return on employees.

FLOW CHART FOR PROFIT BLENDING & MOVEMENT COURSES

Profit Blending & Movement 59

MAINTENANCEPBM-0001 – Profit Blending & Movement: Fundamentals - Profit Blend Controller (PBC) Maintenance

Duration 2 days


Prerequisite course (s) • EXP-02 and EXP-2001

Overview Course participants will learn using Profit® Blend Controller (PBC) which covers application functional overview, application setup & monitoring, software structure & configuration, and troubleshooting & maintenance.


PBM-0002 – Profit Blending & Movement: Fundamentals - Profit Inventory Monitor (PIM) MaintenanceDuration 1 day


Prerequisite course (s) • EXP-02

Overview Course participants will learn using Profit® Inventory Monitor (PIM) which covers application functional overview, application setup & monitoring, software structure & configuration, and troubleshooting & maintenance.


PBM-0003 – Profit Blending & Movement: Fundamentals - Profit Movement Management (PMM) MaintenanceDuration 5 days


Prerequisite course (s) • EXP-01 or EXP-12 or EXP-13

Overview Course participants will acquire knowledge about Profit® Movement Management (PMM) concepts and individual modules, including practical experience in using and configuring PMM.


PBM-0004 – Profit Blending & Movement: Fundamentals - Profit Blend Optimizer (PBO) MaintenanceDuration 2.0 days



Overview Course participants will learn how to use Profit® Blend Optimizer (PBO) in a combined lecture and lab environment.


PBM-0008 – Profit Blending & Movement: Fundamentals - Profit Movement Management – Movement Monitor (PMM-MM) Maintenance

Duration 3.0 days


Prerequisite course (s) • EXP-01 or EXP-12 or EXP-13

Overview Course participants will acquire knowledge about Profit® Movement Management – Movement Monitor (PMM-MM) concepts and individual modules, including practical experience in using and configuring PMM-MM.



PBM-0009 – Profit Blending & Movement: Fundamentals - Profit Movement Management – Movement Control (PMM-MC) Maintenance

Duration 2.0 days


Prerequisite course (s) • PBM-0008 and• (EXP-01 or EXP-12 or EXP-13)

Overview An add-on to PBM-0008, course participants will acquire additional knowledge about Profit® Movement Management – Movement Control (PMM-MC) concepts and individual modules, including practical experience in using and configuring PMM-MC.


Profit Blending & Movement 61

Product Control Center


Product Control CenterProduction Control Center (PCC) offers tools for efficient operations and production management for the oil and gas industry, especially offshore platforms. Honeywell recommends that training on PCC be provided as soon as it is installed to help users familiarize themselves with the product so that they can make the most of it.

FLOWCHART FOR PRODUCT CONTROL CENTER COURSES

FLOWCHART FOR PRODUCT CONTROL CENTER COURSES

Pre

-req

uisi

te

Cou

rses

Pre

-req

uisi

te

Cou

rses

Impl

emen

tatio

nA

dmin

istr

atio

n



PCC-02Production Control

Center: Fundamentals -Capacity and Distribution

Planner (CDP) Configuration and

Administration


Center: Fundamentals -

PCC Implementation


Center: Advanced -

PCC Implementation

Product Control Center 63

IMPLEMENTATIONPCC-010 – Production Control Center: Fundamentals – PCC Implementation

Duration 2 days



Overview Course participants will learn how Production Control Center (PCC) applications help increase production, reduce process downtime and simplify working routines for reporting.


PCC-020 – Production Control Center: Advanced – PCC Implementation

Duration 4 days



Overview Course participants will learn how to maintain maintenance of the installed PCC applications.


ADMINISTRATIONPCC-02 – Production Control Center: Fundamentals – Capacity and Distribution Planner (CDP) Configuration and Administration

Duration 3 days



Overview Course participants will learn the configuration and administrative aspects of the Production Control Center (PCC) and the Capacity and Distribution Planner (CDP).



Uniformance PHD

Uniformance PHD 65

Uniformance PHDHoneywell’s Uniformance® Process History Database (PHD) provides a rich, flexible environment for the collection, storage, and analysis of process data. Its collector/shadow architecture allows data to be gathered from disparate control systems and other data sources, into a unified database for long-term storage. The PHD database may be centrally configured and managed, gathering data from many systems including Honeywell Experion® Process Knowledge System (PKS) and TotalPlant® Solution (TPS), OPC Servers, and other third-party sources. This data is “shadowed” into a single centralized database, allowing engineers and plant management to analyze the performance of the entire operation from a single location.

Honeywell offers training courses that include best practices to configure and manage data and analyze performance.

FLOWCHART FOR UNIFORMANCE PHD COURSES

Pre

-req

uis

ite

Co

urs

esP

re-r

equ

isit

e C

ou

rses

Imp

lem

enta

tio

n



UNI-5749 Uniformance PHD:

Fundamentals -Desktop Tools and

Visual PHD End User Implementation

UNI-5767-WS Uniformance PHD:

Fundamentals -Experion Integration

Implementation -Workshop


Fundamentals -Process Studio Implementation

UNI-5700-VT Uniformance PHD:

Fundamentals -Desktop Tools End User Implementation

UNI-0001-WS Uniformance PHD:

Fundamentals -Installation On Clusters

Implementation -Workshop1

1. UNI-5747

UNI-US02 Uniformance PHD:

Fundamentals -System Monitor Implementation

Ad

min

istr

atio

n


Fundamentals -System

Administration


Fundamentals -Process Studio and System

Administration


IMPLEMENTATIONUNI-0001-WS – Uniformance PHD: Fundamentals – Installation on Clusters Implementation -Workshop

Duration 2 days



Overview Course participants will learn to install, configure and maintain a Uniformance PHD system on a Microsoft Failover Cluster.

Delivery Options • in-Center Instructor-Led Training

UNI-5749 – Uniformance PHD: Fundamentals – Desktop Tools and Visual PHD End User Implementation

Duration 2.5 days



Overview Course participants will learn how to utilize Uniformance® Desktop tools, Visual PHD, and OLE DB Providers for the access and analysis of Uniformance data.


UNI-5767-WS – Uniformance PHD: Fundamentals – Experion Integration Implementation -Workshop

Duration 2.5 days


Prerequisite course (s) • UNI-5747

Overview Course participants will learn to configure a Uniformance® PHD/Experion® Link, install and configure Tag Synchronization, and install and configure PHD Point Server.


UNI-5768 – Uniformance PHD: Fundamentals – Process Studio Implementation

Duration 2 days



Overview Course participants will learn to utilize Uniformance® Process Studio R310.1 for the access and analysis of Uniformance data using trends, tables, and multitrends.

Delivery Options • In-Center Instructor-Led Training• Virtual Training (UNI-5768-VT)

UNI-5700-VT – Uniformance PHD: Fundamentals – Desktop Tools End User Implementation

Duration 3 days



Overview Course participants will learn how to access Uniformance data from a desktop PC.

Delivery Options • Virtual Training

Uniformance PHD 67

UNI-US02 – Uniformance PHD: Fundamentals – System Monitor Implementation

Duration 1 day



Overview Course participants will acquire the skills to implement, configure and use Uniformance System Monitor (USM) which enables use of remote access to review logs of authenticated machines, applications and networks


ADMINISTRATIONUNI-0002 – Uniformance PHD: Fundamentals – Process Studio and System Administration

Duration 4.0 days



Overview This course provides participants the knowledge of features, tools and capabilities of the Uniformance® Process History Database (PHD) system including configuring the tags, monitoring and troubleshooting system operations, and managing user privileges. It also provides the knowledge to utilize Uniformance Process Studio standard features for the access and analysis of Uniformance data using trends, tables, and MS-Excel Companion.


UNI-5747 – Uniformance PHD: Fundamentals – System Administration

Duration 4.5 days



Overview Course participants will gain the knowledge of features, tools and capabilities of theUniformance Process History Database (PHD) system including configuring the tagsand RDIs, monitoring and troubleshooting system operations, managing archive files, andmanaging user privileges. Database backups are also discussed.



ControlEdge

ControlEdge 69

ControlEdgeControlEdge™ programmable logic controller (PLC) is one of Honeywell’s first IIoT-ready controllers. When combined with ExperionR, ControlEdge PLC provides secure connectivity and tight integration to devices from multiple vendors and works with any SCADA system.

Honeywell offers training course that includes implementation of ControlEdge™ PLC along with Experion integration and maintenance overview.

ControlEdge™ RTU is a powerful, modular and scalable controller capable of all remote automation and control applications. In conjunction with Honeywell’s feature-rich SCADA products, it provides an integrated solution that solves complex remote automation requirements for distributed equipment. With Experion® SCADA, it helps users visualize what they need to know to simplify management of field assets and reduces configuration time by 80%. The RTU is now enhanced with native redundancy, expanded input/output (I/O) modules, and built-in wireless and HART I/O. ControlEdge RTU is your edge for improved management of distributed assets.

FLOWCHART FOR CONTROLEDGE COURSES

Pre

-req

uisi

te

Cou

rses

Impl

emen

tatio

n


CTE-0001-ATControlEdge:

Fundamentals -PLC (with Experion

Integration) Implementation

CTE-0002-ATControlEdge:

Fundamentals -RTU (with Experion

Integration) Implementation


IMPLEMENTATIONCTE-0001-AT – ControlEdge: Fundamentals - PLC (with Experion Integration) Implementation

Duration 2 days



Overview Course participants will learn how to configure and implement ControlEdge™ PLC, integrate with Experion, and an overview of maintenance tasks.


CTE-0002-AT – ControlEdge: Fundamentals - RTU (with Experion Integration) Implementation

Duration 2 days



Overview Course participants will learn to plan, operate, and integrate ControlEdge RTU system; configure and program RTU for communication with SCADA servers such as Experion and asset management systems like FDM; program RTU for performing metering functions compliant to AGA standards for gas and API 11.1, API 21.1 standards for liquids; and configure and commission Wireless I/O in RTU; report generation using EFM functionality.


ControlEdge 71

Experion LX

72 2020 Global HPS Training CatalogueP

re-r

equi

site

C

ours

es


1. ELX-0001

ELX-0001

Impl

emen

tatio

n

Experion LX: Fundamentals

-Configuration, Graphics Building and Control

Strategy Implementation

ELX-0002 Experion LX:

Advanced -Configuration, Graphics Building and

Control Strategy Implementation

Experion LXExperion® LX is a purpose-built distributed control system (DCS) leveraging the proven Experion PKS technology to effectively meet process automation requirements in continuous and batch process control applications. This flexible automation solution is simple to use and configure and is ideal for differently sized industrial operations in a wide range of industries.

Honeywell offers training courses that include best practices to implement and optimize the Experion LX system. These training solutions are designed to help participants become more productive and proactive while delivering greater value to operations and help maximize return on employees.

FLOWCHART FOR EXPERION LX COURSES

Experion LX 73

IMPLEMENTATIONELX-0001 – Experion LX: Fundamentals - Configuration, Graphics Building and Control Strategy Implementation

Duration 4.5 days



Overview Course participants will learn all basic concepts and strategies needed to effectively and consistently plan and create basic operating displays (HMI) and C300 control logic (FBs) for Experion® LX.

Delivery Options • In-Center Instructor-Led Training• On-Site Instructor-Led Training• Asynchronous Training (ELX-0001-AT)

ELX-0002 – Experion LX: Advanced - Configuration, Graphics Building and Control Strategy Implementation

Duration 4.5 days


Prerequisite course (s) • (ELX-0001 or ELX-0001-AT)

Overview Course participants will learn advanced concepts and strategies needed to effectively and consistently plan and create basic operating displays (HMI) and C300 control logic (FBs) for Experion® LX.

Delivery Options • In-Center Instructor-Led Training• On-Site Instructor-Led Training• Asynchronous Training (ELX-0002-AT)

Experion MX

Experion MX 75P

re-r

equi

site

C

ours

es


EMX-0006 Experion MX: Advanced –

CDMultivariable Controls

Implementation

Impl

emen

tatio

nP

re-r

equi

site

C

ours

es

Maintenance Course

Mai

nten

ance EMX-0001

Experion MX: Fundamentals -Scanner Setup

and Maintenance

EMX-0004 Experion MX:

Advanced – Cross Direction Controls

Maintenance

1. EMX-0004

EMX-0003Experion MX:

Advanced -MDGrade ChangeImplementation

EMX-0002Experion MX:

Advanced -MD Multivariable

ControlsImplementation

Experion MXExperion® MX training program focuses on guiding participants in the proper maintenance of the Experion MX Q4000-80 scanners.

FLOWCHART FOR EXPERION MX COURSES


IMPLEMENTATIONEMX-0002 – Experion MX: Advanced - MD Multivariable Controls Implementation

Duration 5 days



Overview Course participants will learn the MD multivariable controls analysis and tuning on the Experion MX Quality Control System (QCS).

Delivery Options • In-Center Instructor-Led Training• On-Site Instructor-Led Training• Asynchronous Training (EMX-0002-AT)• Virtual Instructor-Led Training (EMX-0002-VILT)

EMX-0003 – Experion MX: Advanced - MD Grade Change Implementation

Duration 2 days



Overview Course participants will learn the MD Grade change package on the Experion MX Quality Control System (QCS).

Delivery Options • In-Center Instructor-Led Training• On-Site Instructor-Led Training• Asynchronous Training (EMX-0003-AT)• Virtual Instructor-Led Training (EMX-0003-VILT)

EMX-0006 – Experion MX: Advanced - CDMultivariable Controls Implementation

Duration 5 days


Prerequisite course (s) • EMX-0004

Overview Course participants will learn the tuning and optimization of the cross direction controls using the Experion MX CDMultivariable control system.


MAINTENANCEEMX-0001 – Experion MX: Fundamentals – Scanner Setup and Maintenance

Duration 5 days



Overview Course participants will gain the skills required to maintain the Experion® MX Q4000-80 scanner.


EMX-0004 – Experion MX: Advanced - Cross Direction Controls Maintenance

Duration 10 days



Overview Course participants will learn tuning and optimization of cross direction (CD) controls using the Experion MX system.


Experion PKS


Experion PKSExperion® Process Knowledge System (PKS) is Honeywell’s unified system for process, business and asset management that helps industrial manufacturers increase profitability and productivity.

Experion PKS transforms process control beyond traditional Distributed Control System (DCS) functionality by unifying people with process variables, business requirements and asset management. It is the only automation system that focuses on plant personnel and making the most of their knowledge.

Honeywell offers training courses that include best practices to implement and optimize the Experion PKS system.

EXP-01Experion PKS:

Fundamentals -Controller Operation

(CEE)

EXP-12Experion PKS:

Fundamentals -TPS Operation

(ESVT/EST)

EXP-26Experion PKS:

Fundamentals -SCADA Operation

EXP-1007Experion PKS:

Fundamentals – Operations for LNG Carriers

EXP-13Experion PKS:


Operation(CEE and ESVT/EST)


Fundamentals - LCN Connected Server

and Station Installation and Administration

EXP-1014Experion PKS: Advanced -

Server and Station (Non LCN-Connected)

Installation and Administration

EXP-23Experion PKS:

Advanced - Server and Station



Overview Course

Differences Course


Operation Course

Maintenance Course


Fundamentals - System Overview

EXP-16Experion PKS:

Fundamentals - Control Execution

Environment CAB + ACE

Implementation

1. EXP-02 or2. (EXP-05 or EXP-05C3 or EXP-05C3S or EXP-05C2) or3. EXP-23 or4. (TDC-3300APM Or

TDC-3300HPM Or TPS-5722 Or TPS-4750)

EXP-1003Experion PKS: Fundamentals –

TPS to Experion Planning, Implementation, and Troubleshooting Overview

Prer

equi

site

C

ours

esO

verv

iew

Prer

equi

site

C

ours

esIm

plem

enta

tion

Prer

equi

site

C

ours

esM

aint

enan

ce

EXP-25Experion PKS:

Advanced -System Level

and Maintenance

EXP-05Experion PKS:

Fundamentals - Controller/SCADA Troubleshooting

and Maintenance

EXP-05C3Experion PKS:

Fundamentals –C300 Troubleshooting

and Maintenance

EXP-053SExperion PKS:

Fundamentals – C300/SCADA

Troubleshootingand Maintenance


Fundamentals – C200Troubleshooting

and Maintenance

1. EXP-02 and EXP-2001 or2. (EXP-02 or EXP-2001) and (EXP-05 or

EXP-05C3 or EXP-05C3S or EXP-05C2) or 3. EXP-23

Diff

eren

ces

Prer

equi

site

C

ours

es

Pre-

requ

isite

C

ours

esA

dmin

istra

tion

1. EXP-02 1. EXP-2001 1. EXP-03

EXP-17-RTExperion PKS:

Fundamentals -Server Differences


Fundamentals -Controller Differences


Fundamentals -HMIWeb Differences


Fundamentals – R400 Operating System

Differences

Ope

ratio

n

EXP-90Experion PKS:

Advanced - On - Process Migration

Implementation


Fundamentals -Basic NetworkingConcepts and FTE

Implementation


Fundamentals -OPC Concepts

and Implementation

EXP-21Experion PKS:

Fundamentals - Batch Manager Implementation

EXP-24Experion PKS:

Fundamentals -Controller Fieldbus

Configuration Implementation


Advanced - ClassBased Recipes

Implementation

EXP-30Experion PKS:

Advanced - FieldDevice Manager

(FDM)Implementation and

Troubleshooting


Fundamentals -Control Execution

Environment Controller Implementation

EXP-03Experion PKS:

Fundamentals - Graphics Design

and Building Implementation

EXP-02Experion PKS:

Fundamentals - Server Engineeringand Configuration

Implementation

EXP-48Experion PKS:

Fundamentals -Virtualization

Implementation

EXP-50Experion PKS:

Fundamentals -Configuration,

Graphics Building and Control Strategy

Implementation

1. EXP-2001 1. (EXP-1021 or EXP-1021-AT)

1. ( EXP-02 and EXP-2001) or

2. EXP-231. EXP-2001 and

2. EXP-211. EXP-02

Pre-

requ

isite

C

ours

es

EXP-1018-RTExperion PKS: Fundamentals

-Virtualization Premium Platform FX2 Overview

TPS-0005

EXP-1021Experion PKS: Fundamentals -TPS to Experion PKS/Experion

LCN System Integration Overview


Fundamentals –TPS to Experion PKS Migration

Implementation

Experion PKS 79

EXP-01Experion PKS:

Fundamentals -Controller Operation

(CEE)

EXP-12Experion PKS:

Fundamentals -TPS Operation

(ESVT/EST)

EXP-26Experion PKS:

Fundamentals -SCADA Operation


Fundamentals – Operations for LNG Carriers

EXP-13Experion PKS:


Operation(CEE and ESVT/EST)


Fundamentals - LCN Connected Server

and Station Installation and Administration

EXP-1014Experion PKS: Advanced -

Server and Station (Non LCN-Connected)


EXP-23Experion PKS:

Advanced - Server and Station



Overview Course

Differences Course


Operation Course

Maintenance Course


Fundamentals - System Overview

EXP-16Experion PKS:

Fundamentals - Control Execution

Environment CAB + ACE

Implementation

1. EXP-02 or2. (EXP-05 or EXP-05C3 or EXP-05C3S or EXP-05C2) or3. EXP-23 or4. (TDC-3300APM Or

TDC-3300HPM Or TPS-5722 Or TPS-4750)

EXP-1003Experion PKS: Fundamentals –

TPS to Experion Planning, Implementation, and Troubleshooting Overview

Prer

equi

site

C

ours

esO

verv

iew

Prer

equi

site

C

ours

esIm

plem

enta

tion

Prer

equi

site

C

ours

esM

aint

enan

ce

EXP-25Experion PKS:

Advanced -System Level

and Maintenance

EXP-05Experion PKS:

Fundamentals - Controller/SCADA Troubleshooting

and Maintenance


Fundamentals –C300 Troubleshooting

and Maintenance

EXP-053SExperion PKS:

Fundamentals – C300/SCADA

Troubleshootingand Maintenance


Fundamentals – C200Troubleshooting

and Maintenance

1. EXP-02 and EXP-2001 or2. (EXP-02 or EXP-2001) and (EXP-05 or

EXP-05C3 or EXP-05C3S or EXP-05C2) or 3. EXP-23

Diff

eren

ces

Prer

equi

site

C

ours

es

Pre-

requ

isite

C

ours

esA

dmin

istra

tion

1. EXP-02 1. EXP-2001 1. EXP-03


Fundamentals -Server Differences


Fundamentals -Controller Differences


Fundamentals -HMIWeb Differences


Fundamentals – R400 Operating System

Differences

Ope

ratio

n

EXP-90Experion PKS:

Advanced - On - Process Migration

Implementation


Fundamentals -Basic NetworkingConcepts and FTE

Implementation


Fundamentals -OPC Concepts

and Implementation

EXP-21Experion PKS:

Fundamentals - Batch Manager Implementation

EXP-24Experion PKS:

Fundamentals -Controller Fieldbus

Configuration Implementation


Advanced - ClassBased Recipes

Implementation

EXP-30Experion PKS:

Advanced - FieldDevice Manager

(FDM)Implementation and

Troubleshooting


Fundamentals -Control Execution

Environment Controller Implementation

EXP-03Experion PKS:

Fundamentals - Graphics Design

and Building Implementation

EXP-02Experion PKS:

Fundamentals - Server Engineeringand Configuration

Implementation

EXP-48Experion PKS:

Fundamentals -Virtualization

Implementation

EXP-50Experion PKS:

Fundamentals -Configuration,

Graphics Building and Control Strategy

Implementation

1. EXP-2001 1. (EXP-1021 or EXP-1021-AT)

1. ( EXP-02 and EXP-2001) or

2. EXP-231. EXP-2001 and

2. EXP-211. EXP-02

Pre-

requ

isite

C

ours

es

EXP-1018-RTExperion PKS: Fundamentals

-Virtualization Premium Platform FX2 Overview

TPS-0005

EXP-1021Experion PKS: Fundamentals -TPS to Experion PKS/Experion

LCN System Integration Overview


Fundamentals –TPS to Experion PKS Migration

Implementation


OVERVIEWEXP-6000 – Experion PKS: Fundamentals – System Overview

Duration 2 days



Overview Course participants will gain a full understanding of a system network hierarchy and the components that reside on each network layer, given multiple business/process applications.

Delivery Options • In-Center Instructor-Led Training• On-Site Instructor-Led Training• Virtual Training (EXP-6000-VT)• Asynchronous Training (EXP-6000-AT)

EXP-1003 – Experion PKS: Fundamentals – TPS to Experion Planning, Implementation, and Troubleshooting Overview

Duration 8 days


Prerequisite course (s) • EXP-02 or• (TDC-3300APM or TDC-3300HPM or TPS-5722 or TPS-4750) or• (EXP-05 or EXP-05C3 or EXP-05C3S or EXP-05C2) or• EXP-23

Overview Course participants will learn how to install, migrate and troubleshoot both the hardware and software of an Experion® PKS System connected to the TPS/TDC3000 System with HPM Controllers.


EXP-1018-RT – Experion PKS: Fundamentals - Virtualization Premium Platform FX2 Overview

Duration 4 hours



Overview Course participants will learn the Honeywell Virtualization Premium Platform basedon Dell FX2 system.

Delivery Options • Recorded Training (RT)

EXP-1021 – Experion PKS: Fundamentals – TPS to Experion PKS/Experion LCN System Integration OverviewDuration 5 days


Prerequisite course (s) • TPS-0005

Overview Course participants will get information to install, migrate and troubleshoot a TPS System integrated to Experion PKS/Experion LCN system.


Experion PKS 81

IMPLEMENTATIONEXP-02 – Experion PKS: Fundamentals – Server Engineering and Configuration Implementation

Duration 4.5 days



Overview Course participants will learn how to plan an Experion® PKS system effectively, configure a server for SCADA connections, integrate with OPC and TPS platforms, and use Experion PKS data in other applications.

Delivery Options • In-Center Instructor-Led Training• On-Site Instructor-Led Training• Asynchronous Training (EXP-02-AT)• Virtual Training (EXP-02-VT)

EXP-03 – Experion PKS: Fundamentals – Graphics Design and Building ImplementationDuration 4.0 days



Overview Course participants will learn how to develop Experion® PKS display design guidelines and operating displays using the HMIWeb Display Builder.


EXP-16 – Experion PKS: Fundamentals – Control Execution Environment CAB + ACE ImplementationDuration 3 days



Overview Course participants will learn how to create a Custom Algorithm Block (CAB) and to configure custom blocks in a Control Execution Environment (CEE).


EXP-2001 – Experion PKS: Fundamentals – Control Execution Environment Controller ImplementationDuration 4.5 days



Overview Course participants will learn concepts and strategies needed to plan, configure and build a Control Execution Environment (CEE) applicable to C200 and C300 controllers and the Application Control Environment (ACE).



EXP-2001C3 – Experion PKS: Fundamentals – C300 Controller ImplementationDuration 4.5 days



Overview Course participants will learn concepts and strategies needed to plan, configure and build a C300 controller.

Delivery Options • In-Center Instructor-Led Training• On-Site Instructor-Led Training• Asynchronous Training (EXP-2001C3-AT)

EXP-2001UOC – Experion PKS: Fundamentals – UOC Controller ImplementationDuration 4.5 days



Overview Course participants will learn concepts and strategies needed to plan, configure and build an Unit Operation Controller (UOC) controller.

Delivery Options • In-Center Instructor-Led Training• On-Site Instructor-Led Training• Asynchronous Training (EXP-2001UOC-AT)

EXP-21 – Experion PKS: Fundamentals – Experion Batch Manager (EBM) – Instance Based Recipes ImplementationDuration 3.5 days



Overview Course participants will learn how to apply Experion Batch Manager (EBM) instance based recipes to their process needs.


EXP-24 – Experion PKS: Fundamentals – Controller Fieldbus Configuration ImplementationDuration 4 days



Overview Course participants will learn how to build and configure a C200/C200E/C300 controller with a FieldBus Interface Module (FIM).


EXP-30 – Experion PKS: Advanced – Field Device Manager (FDM) Implementation and TroubleshootingDuration 4 days



Overview Course participants will build HART, FF networks, configure HART, FF devices, configure HART Multiplexers, modify parameters, utilize history functions, configure and use Mux Monitoring solution and troubleshoot HART devices using Field Device Manager (FDM).


Experion PKS 83

EXP-48 – Experion PKS: Fundamentals – Virtualization Implementation

Duration 4.5 days



Overview The course presents the concepts and guidelines needed to implement (Experion PKS off-process) / (on-process) virtual system.

Delivery Options • In-Center Instructor-Led Training• Asynchronous Training (EXP-48-AT)• Virtual Training (EXP-48-VT)• Virtual Instructor-Led Training (EXP-48-VILT)

EXP-50 – Experion PKS: Fundamentals – Configuration, Graphics Building and Control Strategy Implementation

Duration 9.5 days



Overview Course participants will learn all basic concepts and strategies needed to effectively and consistently plan Experion PKS operating displays, and to configure a Control Execution Environment (CEE) applicable to the C200 and C300 controllers.

Delivery Options • In-Center Instructor-Led Training• On-Site Instructor-Led Training• Virtual Instructor-Led Training (EXP-50-VILT)

EXP-90 – Experion PKS: Advanced – On-Process Migration Implementation

Duration 4.5 days


Prerequisite course (s) • (EXP-02 and EXP-2001) or• EXP-23

Overview Course participants will learn how to qualify systems for On-Process migration and migration of redundant servers, stations, and controllers.


EXP-1011 – Experion PKS: Advanced – Class Based Recipes Implementation

Duration 3 days


Prerequisite course (s) • EXP-2001 and• EXP-21

Overview Course participants will learn how to perform the following Experion Batch Manager tasks: create Layered Recipes, understand use of Recipe Builder, and use of Class Based Recipes (CBR).

Delivery Options • In-Center Instructor-Led Training• Asynchronous Training (EXP-1011-AT)

EXP-1015 – Experion PKS: Fundamentals – Basic Networking Concepts and FTE Implementation

Duration 3 days



Overview The course presents the concepts of networking and guidelines needed to implement FTE



EXP-1016 – Experion PKS: Fundamentals – OPC Concepts and Implementation

Duration 3.5 days



Overview This course provides participants the ability to configure and manage Experion PKS interface with 3rd party devices and systems via OPC.

Delivery Options • In-Center Instructor-Led Training• On-Site Instructor-Led Training• Virtual Training (EXP-1016-VT)• Virtual Instructor-Led Training (EXP-1016-VILT)

EXP-1022 – Experion PKS: Fundamentals – Experion LCN (ELCN) Network Migration Implementation

Duration 3 days


Prerequisite course (s) • EXP-1021 or EXP-1021-AT

Overview Course participants will get TPS/Experion skills and knowledge required to configure, implement and migrate a TPS system to Experion LCN (ELCN) Network.


DIFFERENCESEXP-17-RT – Experion PKS: Fundamentals – Server Differences

Duration 7 hours



Overview Course participants will learn about the Experion® PKS features available with different product releases.

Delivery Options • Recorded Training

EXP-18-RT – Experion PKS: Fundamentals – Controller Differences

Duration 3 hours



Overview Course participants will learn about the Experion® PKS features available with differentproduct releases.


EXP-19-RT – Experion PKS: Fundamentals – HMIWeb Differences

Duration 1 hour



Overview Course participants will learn about the Experion® PKS features available with different product releases.


EXP-1010-RT – Experion PKS: Fundamentals – R400 Operating System Differences

Duration 0.5 hours



Overview Course participants will gain the ability to identify Operating System (OS) changes that affect Experion PKS R400.


Experion PKS 85

ADMINISTRATIONEXP-23 – Experion PKS: Advanced – Server and Station Installation and AdministrationDuration 9.5 days



Overview Participants will undergo intensive training in planning, installing, configuring, and administering the Experion® PKS Systems (LCN-connected or non-LCN-connected).


EXP-1002 – Experion PKS: Fundamentals – ESVT and ES-T AdministrationDuration 4.5 days



Overview Course participants will learn the concepts and strategies needed to administer and maintain TPS connected Experion PKS System.


EXP-1014 – Experion PKS: Advanced – Server and Station (Non LCN-Connected) Installation and Administration

Duration 9.5 days



Overview Participants will undergo intensive training in planning, installing, configuring, and administering the Experion® PKS Systems (Non-LCN-connected).

Delivery Options • In-Center Instructor-Led Training• Virtual Training (EXP-1014-VT)

OPERATIONEXP-01 – Experion PKS: Fundamentals – Controller Operation

Duration 3 days



Overview Course participants will learn how to efficiently operate the Experion® PKS System comprising Experion PKS Server, Fault Tolerant Ethernet and the C200/300 controllers.


EXP-12 – Experion PKS: Fundamentals – TPS Operation

Duration 4 days



Overview Course participants will learn how to operate the Experion PKS System integrated with a TotalPlant Solution (TPS) system.



EXP-13 – Experion PKS: Fundamentals – Controller and TPS Operation

Duration 4 days



Overview Course participants will learn how to operate the Experion® PKS System connected to both the C200/300 controller and the TotalPlant Solution (TPS) system.


EXP-26 – Experion PKS: Fundamentals – SCADA Operation

Duration 2.5 days



Overview Course participants will learn to operate the Experion® PKS System comprising the Experion PKS Server and SCADA controllers.

Delivery Options • In-Center Instructor-Led Training• On-Site Instructor-Led Training• Asynchronous Training (EXP-26-AT)

EXP-1007 – Experion PKS: Fundamentals – Operations for LNG Carriers

Duration 3 days



Overview This course covers the operation of the Honeywell Integrated Automation System (IAS) including the Experion® station, the Fault Tolerant Ethernet (FTE) and C200 controllers.


MAINTENANCEEXP-05 – Experion PKS: Fundamentals – Controller/SCADA Troubleshooting and Maintenance

Duration 7.5 days



Overview Course participants will gain a full understanding of both the hardware and software facets of the Experion® PKS C200, C200E, C300 controllers and SCADA interfaces.

Delivery Options • In-Center Instructor-Led Training• On-Site Instructor-Led Training• Asynchronous Training (EXP-05-AT)

EXP-05C3 – Experion PKS: Fundamentals – C300 Troubleshooting and Maintenance

Duration 5 days



Overview Course participants will gain a full understanding of both the hardware and software facets of the Experion PKS C300 controller interfaces.

Delivery Options • In-Center Instructor-Led Training• On-Site Instructor-Led Training• Asynchronous Training (EXP-05C3-AT)

Experion PKS 87

EXP-05C3S – Experion PKS: Fundamentals – C300/SCADA Troubleshooting and Maintenance

Duration 5 days



Overview Course participants will gain a full understanding of both the hardware and software facets of the Experion PKS C300/SCADA controller interfaces.


EXP-05C2 – Experion PKS: Fundamentals – C200/C200E Troubleshooting and Maintenance

Duration 5 days



Overview Course participants will gain a full understanding of both the hardware and software facets of the Experion PKS C200/C200E controller interfaces.


EXP-25 – Experion PKS: Advanced – System Level Troubleshooting and Maintenance

Duration 9.5 days


Prerequisite course (s) • EXP-02 and EXP-2001 or• (EXP-02 or EXP-2001) and (EXP-05 or EXP-05C3 or EXP-05C3S or EXP-05C2) or• EXP-23

Overview Course participants will get in-depth training on how to troubleshoot both the hardware and software of the Experion PKS system.


Fail Safe Controller

Fail Safe Controller 89

Fail Safe ControllerHoneywell Safety Systems help lower the cost of safety and improve plant performance by minimizing the risk of safety incidents, maximizing production uptime, reducing the cost of compliance and providing productivity tools that help users manage safety in the plant.

The Fail Safe Controller (FSC) is a user-programmable, Dual Modular Redundant (DMR) or Quadruple Modular Redundant (QMR™) microprocessor-based safety system which can perform a wide range of high-integrity process control and safety functions. It is integrated with the TPS (Total Plant Solution) control system.

Honeywell offers training courses that include best practices to implement and optimize the FSC system.

FLOWCHART FOR FAIL SAFE CONTROLLER COURSES

Pre

-req

uis

ite

Co

urs

esM

ain

ten

ance

Maintenance Course

FSC-4505Fail Safe

Controller: Fundamentals -

Maintenance

Pre

-req

uis

ite

Co

urs

esO

verv

iew

Overview Course

FSC-4501Fail Safe


Managers Overview

Pre

-req

uis

ite

Co

urs

esIm

ple

men

tati

on


FSC-4508

FSC-4508Fail Safe

Controller: Fundamentals -Implementation

FSC-4502Fail Safe


On-line ModificationImplementation

FSC-4512Safety Manager:

Advanced-Implementation


OVERVIEWFSC-4501 – Fail Safe Controller: Fundamentals – Managers Overview

Duration 1 day



Overview Course participants will learn the basic features and functions of the Fail Safe Controller (FSC) system, including operations, engineering, production, maintenance, purchasing, finance, and human resources.


IMPLEMENTATIONFSC-4502 – Fail Safe Controller: Fundamentals – On-line Modification Implementation

Duration 2 days


Prerequisite course (s) • FSC-4508

Overview Course participants will learn to modify an application, upgrade to a newer software release, and add or remove additional hardware on-line via exercises on Fail Safe Controller (FSC) systems.


FSC-4508 – Fail Safe Controller: Fundamentals – Implementation

Duration 4 days



Overview Honeywell’s course on Fail Safe Controller Implementation is for participants to learn to operate a Fail Safe Controller (FSC) System consisting of FSC, Stand Alone Computers, Universal Stations (US)/Global User Stations (GUS), and/or Experion Systems.


FSC-4512 – Fail Safe Controller: Advanced – Implementation

Duration 5 days



Overview Course participants will learn programming and operating the Fail Safe Controller (FSC) System, utilizing fault-finding techniques and diagnostics, and making on-line configuration changes.


MAINTENANCEFSC-4505 – Fail Safe Controller: Fundamentals – Maintenance

Duration 4 days



Overview Course participants will learn to support the Fail Safe Controller (FSC) system with first-call maintenance.


Fail Safe Controller 91

Fire Detection Systems


Fire Detection SystemsComplimenting Honeywell’s Industry Leading Experian PKS Process Control, and Safety Manager Systems are the XLS140 and XLS3000 Fire Detection, Suppression and Mass Notification Control Systems.

The XLS Platform provides the final dimension of Personnel and Facility Protection by combining UL-Listed and NFPA 72 Compliant Control Panels with Industry Leading Detection Devices. Whether the requirements are for basic Thermal and Smoke Detection, or advanced Fire and Gas Detection with Suppression Activation, the XLS Series provides the flexibility to comply. The XLS Platform also offers options for advanced Mass Notification and Communications Functionality throughout the facility.

The XLS System performance is further enhanced by the availability of a fully UL-Listed Interface to the Enterprise Buildings Integrator (EBI), or Fire Safety Manager Graphical Workstations. Interfaces are also available for Honeywell’s Safety Manager and Experion PKS as well as other platforms through Modbus and BACnet Gateways.

Honeywell offers hands-on learning opportunities to equip Field Engineers and End-users with the tools needed to program, commission and implement the XLS Platform with confidence.

FLOWCHART FOR FIRE DETECTION SYSTEMS COURSES

Pre

-req

uis

ite

Co

urs

esIm

ple

men

tati

on

Implementation

FDS-0001Fire Detection Systems:

Fundamentals -XLS140/XLS3000

System Programming,Commissioning and

Implementation

Fire Detection Systems 93

IMPLEMENTATIONFDS-0001 – Fire Detection Systems: Fundamentals – XLS140/XLS3000 System Programming, Commissioning and Implementation

Duration 5 days



Overview Course Participants will obtain the knowledge, skills and tools required to properly Startup, Program, Commission, Operate and Maintain XLS120, XLS140 and XLS3000 Fire and Gas Detection Systems.


HC900

HC900 95

HC900The Honeywell HC900 Hybrid Controller is an advanced loop and logic controller offering a modular design to satisfy the control and data management needs of a wide range of process equipment. When combined with the optional 900 Control Station operator Interface that is tightly integrated with the controller’s database, configuration and setup time is minimized. This powerful combination, backed by Honeywell’s performance proven control technology, provides users an ideal solution for process control. In addition, open Ethernet connectivity with Modbus TCP Protocol allows network access using a variety of HMI/SCADA software.

The HC900 Controller provides superior PID loop control and more robust analog processing than most logic controllers without compromising logic performance. A separate, fast scan cycle executes a rich assortment of logic and calculation function blocks. Logic blocks may also execute in the same scan with analog function blocks for time critical events. These function blocks may be fully integrated into a combined analog and logic control strategy for uncompromising control performance.

Honeywell offers training courses that include best practices to expand and improve system performance.

FLOWCHART FOR HC900 COURSES

Pre

-req

uisi

te

Cou

rses

Impl

emen

tatio

n


HC-0001HC900:

Fundamentals -Controller and Control StationImplementation

HC-0002-ATHC900:

Fundamentals -Hybrid Controller

and Control StationImplementation

HC-0003HC900:

Fundamentals -Controller

Implementation


IMPLEMENTATIONHC-0001 – HC900: Fundamentals – Controller and Control Station Implementation

Duration 4 days



Overview Course participants will acquire an understanding of the HC900 system architecture, configuration methods and commissioning tools.


HC-0002-AT – HC900: Fundamentals – Hybrid Controller and Control Station Implementation

Duration 4 days



Overview Course participants will acquire an understanding of the HC900 Hybrid Controller and Control Station system architecture, configuration methods and commissioning tools.


HC-0003 – HC900: Fundamentals – Controller Implementation

Duration 2 days



Overview Course participants will learn programming skills, configuring of the HC900, other device interfacing, and gain an understanding of profile data setting.


MasterLogic


MasterLogicMasterLogic programmable logic controllers (PLCs) are modular, scalable and rack-based. The PLCs are available as stand-alone products as well as distributed with peer-to-peer connections. The CPUs, power supplies and rack sizes are available in various models to suit different applications.

Honeywell offers training courses that include best practices to configure, implement, and optimize the MasterLogic 200R.

FLOWCHART FOR MASTERLOGIC COURSES

Pre

-req

uis

ite

Co

urs

esIm

ple

men

tati

on


ML-0001MasterLogic:

Fundamentals -200R

Implementation

MasterLogic 99

IMPLEMENTATIONML-1001 – MasterLogic: Fundamentals – 200R Implementation

Duration 4.5 days



Overview Course participants will learn the basic concepts and strategies needed to develop guidelines for effective and consistent planning of the MasterLogic 200R (ML200R).

Delivery Options • In-Center Instructor-Led Training• Asynchronous Training (ML-1001-AT)

MatrikonOPC

MatrikonOPC 101

MatrikonOPCThe MatrikonOPC training program is the world’s leading OPC training and educational program. Known for its pragmatic “Learn from those who do” approach, MatrikonOPC offers a unique OPC training experience that only instructors with extensive onsite OPC project expertise can deliver. As the most recognized OPC Certification program in the market, this training takes participants’ careers to the next level by distinguishing them as a MatrikonOPC Certified Professional. The hands-on workshops are designed to give Automation and Process Control professionals the knowledge and tools necessary to build and troubleshoot OPC-based architectures. All workshops are now offered in classroom sessions, web-based virtual sessions, and hybrid sessions where the classroom session is simultaneously presented in a web-based virtual environment.

FLOWCHART FOR MATRIKONOPC COURSES

Pre

-req

uisi

te

Cou

rses

Impl

emen

tatio

n


MOPC-0007-WSMatrikonOPC: Fundamentals

-OPC Classic and Real World

Architectures Implementation-

Workshop

MOPC-0008-WSMatrikonOPC: Fundamentals -OPC Unified Architecture

Implementation-Workshop

MOPC-0009-WSMatrikonOPC: Fundamentals

-Industrial Cyber Security for OPC Implementation

-Workshop


IMPLEMENTATIONMOPC-0007-WS – MatrikonOPC: Fundamentals - OPC Classic and Real World Architectures Implementation - Workshop

Duration 2 days



Overview This workshop covers the basics of Classic OPC and an understanding of the three most common OPC specifications (DA, HDA, and A&E), how OPC components can be used to overcome architectural and technical challenges, and how Microsoft COM/DCOM and security influence OPC connectivity and functionality.

Delivery Options • In-Center Instructor-Led Training• On-Site Instructor-Led Training• Virtual Instructor-Led Training• Hybrid Instructor-Led Training

MOPC-0008-WS – MatrikonOPC: Fundamentals - OPC Unified Architecture Implementation - Workshop

Duration 2 days



Overview This workshop introduces participants to the OPC Unified Architecture specification, and the functionality of the applications that are being developed using this specification. Topics include the Evolution of OPC, the OPC UA Specification, Server Functionality, the Address Space, the Security and Information Models, and Migration Tools and Strategies.


MOPC-0009-WS – MatrikonOPC: Fundamentals - Industrial Cyber Security for OPC Implementation - Workshop

Duration 1 day



Overview This workshop looks at technologies, tools, and techniques for examining the security configuration of existing systems and using OPC Applications to strengthen the security of the systems. Participants will also be introduced to mechanisms for implementing security directly on the OPC server itself.


MXProLine


Mai

nte

nan

ce

Maintenance Course

MXP-0008MXProLine:

Fundamentals –ZipLine Scanning

Measurement DeviceMaintenance

Pre

-req

uis

ite

Co

urs

esIm

ple

men

tati

on


MXP-03MXProLine:

Fundamentals -System

Implementation

MXP-04MXProLine:

Fundamentals -System MD and

CD ControlsImplementation

Pre

-req

uis

ite

Co

urs

es

MXP-06MXProLine:

Fundamentals -Scanner and Sensor

Maintenance

MXProLineThe MXProLine™ training program focuses on proper maintenance of the Honeywell MXProLine Quality Control System.

FLOWCHART FOR MXPROLINE COURSES

MXProLine 105

IMPLEMENTATIONMXP-03 – MXProLine: Fundamentals – System Implementation

Duration 4.5 days



Overview Course participants will learn the MXProLine system architecture, startup, navigation and operation, as well as its configuration and software maintenance.


MXP-04 – MXProLine: Fundamentals – System MD and CD Controls Implementation

Duration 4.5 days



Overview Course participants will learn the implementation and tuning of machine direction and cross direction controls in the MxProLine system using a simulated process.


MAINTENANCEMXP-0008 – MXProLine: Fundamentals – ZipLine Scanning Measurement Device Maintenance

Duration 3 days



Overview Course participants will learn how to safely operate, maintain and troubleshoot the ZipLine Model 3090 on the MXProLine Quality Control System (QCS).


MXP-06 – MXProLine: Fundamentals – Scanner and Sensor Maintenance

Duration 4.5 days



Overview Course participants will learn the preventive and corrective maintenance of the MxProLine scanner and sensor update system.


PMD

PMD 107

PMDThe Experion® Process Knowledge System (PKS) is based on more than thirty years experience, involving some 10,000 installations in the Pulp, Paper, and Printing Industry, as well as innovations developed in other process industries. Experion combines common control technology with industry-specific elements such as Process, Machinery and Drives (PMD) Technology, and process knowledge solutions.

The PMD Controller is an open Fieldbus Controller that is used in PMD technology to control Fieldbus-based processes and process equipment. The PMD Controller includes all the properties required for the control of continuous and batch processes, machines and stand-alone drives and line drives. Its control tools cover the conventional controls and logic, plus the advanced control methods such as fuzzy logic, neural net, optimization, multivariable control and statistical process control.

Honeywell offers training courses that include best practices to implement, maintain, and optimize the PMD Controller.

FLOWCHART FOR PMD COURSES

Pre

-req

uisi

teC

ours

esO

verv

iew

Overview Course

PMD-0001PMD: Fundamentals -

New Releases Features Overview

PMD-70PMD: Fundamentals –

New Features of TotalPlant Alcont -

PMD Upgrade Overview

Pre

-req

uisi

teC

ours

esO

pera

tion

Operation Course

PMD-01 PMD:

Fundamentals -User Operation

Pre

-req

uisi

teC

ours

esM

aint

enan

ce

Maintenance Course

1. PMD-201. PMD-20 and

2. PMD-30

PMD-30 PMD:

Fundamentals -Maintenance

PMD-32 PMD:

Advanced -Maintenance


Impl

emen

tatio

n

PMD-22PMD: Fundamentals -

Applications Advanced Implementation

PMD-24 PMD: Fundamentals -

HMIWeb Display Builder Implementation

PMD-42 PMD: Advanced -

Profibus Interfaces Implementation

PMD-0002 PMD: Advanced -

PROFINET Interfaces Implementation

PMD-20 PMD: Fundamentals -

Applications Implementation

1. PMD-20 1. PMD-01 1. PMD-30

Pre

-req

uisi

teC

ours

es

PMD-NET01 PMD: Fundamentals -Local Area Networks

Maintenance

PMD-0003 PMD: Fundamentals

-Virtualization Implementation


OVERVIEWPMD-0001 – PMD: Fundamentals – New Releases Features Overview

Duration 2 days


Prerequisite course (s) • PMD-20

Overview This course provides participants the essential new features of various PMD releases.


PMD-70 – PMD: Fundamentals – New Features of TotalPlant Alcont – PMD Upgrade Overview

Duration 2 days



Overview Course participants will learn the differences and changes to system structure and application provided by system upgrade from TotalPlant Alcont platform to Experion® Process Knowledge (PKS) PMD platform.


IMPLEMENTATIONPMD-0002 - PMD: Advanced - PROFINET Interfaces ImplementationDuration 2 days



Overview Participants will learn configuration of a PROFINET system, its operations, and diagnostic capabilities.


PMD-0003 - PMD: Fundamentals - Virtualization ImplementationDuration 2.5 days



Overview Course participants will learn the concepts and guidelines needed to implement an off-process PMD virtual system.


PMD-20 – PMD: Fundamentals – Applications ImplementationDuration 4 days



Overview Course participants will learn about the application planning of control and logic loops.


PMD-22 – PMD: Fundamentals – Applications Advanced ImplementationDuration 3 days



Overview Course participants will learn the application planning of interlocks, cascade and logic sequence points.


PMD 109

PMD-24 – PMD: Fundamentals – HMIWeb Display Builder ImplementationDuration 2 days



Overview Course participants will learn the planning and configuration of displays and pictures.


PMD-42 – PMD: Advanced – Profibus Interfaces Implementation

Duration 2 days



Overview Course participants will learn about the structure and maintenance of Profibus, the leading fieldbus system.


OPERATIONPMD-01 – PMD: Fundamentals – User Operation

Duration 1 day



Overview Course participants will learn about the control room functions and how to control the process using the HMIWeb user interface.


MAINTENANCEPMD-30 – PMD: Fundamentals – Maintenance

Duration 3 days



Overview Course participants will learn about the system structure and functions focused on system maintenance.


PMD-32 – PMD: Advanced – Maintenance

Duration 2 days


Prerequisite course (s) • PMD-20 and• PMD-30

Overview Course participants will learn about advanced system maintenance, troubleshooting and repair.


PMD-NET01 – PMD: Fundamentals – Local Area Networks Maintenance

Duration 2 days



Overview Course participants will gain a basic knowledge of local area networks and how to maintain and troubleshoot them.


Printa

Printa 111

PrintaHoneywell’s Printa is a complete printing plant automation system designed for the printer to easily and efficiently control the printing process, reducing waste and ensuring perfect quality in every print run and on-schedule operations. Directly installed in the printing press during manufacturing, the Printa system continuously monitors press operations. It performs advanced condition checks, keeps the printer informed of job progress, and provides maintenance reports. The system includes press pre-setting, startup and shutdown automation, run programs, real-time reporting and condition monitoring.

Honeywell offers training courses that include best practices to implement, maintain, and optimize the Printa system.

FLOWCHART FOR PRINTA COURSES

Maintenance Course

PRI-30Printa:

Fundamentals -Maintenance

1. PRI-01 and 2. PRI-20

Pre

-req

uis

ite

Co

urs

esM

ain

ten

ance

Pre

-req

uis

ite

Co

urs

esIm

ple

men

tati

on


PRI-05Printa:

Fundamentals -PMS -Production

ManagementImplementation

1. PRI-01 and 2. PRI-03

PRI-30Printa:

Fundamentals -PMS -Production

PlanningImplementation

PRI-30Printa:

Fundamentals -Applications

Implementation

1. PRI-01

Pre

-req

uis

ite

Co

urs

esO

per

atio

n

Operation Course

PRI-01Printa:

Fundamentals -Operation


IMPLEMENTATIONPRI-03 – Printa: Fundamentals – PMS – Production Planning Implementation

Duration 2 days


Prerequisite course (s) • PRI-01

Overview Course participants will learn to use the PMS user interface for production planning of the printing process.


PRI-05 – Printa: Fundamentals – PMS – Production Management Implementation

Duration 1 day


Prerequisite course (s) • PRI-01 and• PRI-03

Overview Course participants will learn to use the PMS user interface for production management of the printing process.


PRI-20 – Printa: Fundamentals – Applications Implementation

Duration 2 days


Prerequisite course (s) • PRI-01

Overview Course participants will learn Printa application definitions, focusing on routines of maintenance operations.


OPERATIONPRI-01 – Printa: Fundamentals – Operation

Duration 1 day



Overview Course participants will learn the Printa user interface for controlling the printing process.


MAINTENANCEPRI-30 – Printa: Fundamentals – Maintenance

Duration 4 days


Prerequisite course (s) • PRI-01 and• PRI-20

Overview Course participants will learn to maintain and troubleshoot the system.


Pulping


PulpingThe Pulping training program focuses on proper maintenance of the Honeywell bleaching sensors and pulping applications.

FLOWCHART FOR PULPING COURSES

Pre

-req

uisi

te

Cou

rses

Mai

nten

ance

Maintenance Course

PUL-2314Pulping:

Fundamentals -Pulp SensorMaintenance

Pulping 115

MAINTENANCEPUL-2314 – Pulping: Fundamentals – Pulp Sensor Maintenance

Duration 2 days



Overview Course participants will learn how to install and maintain the Honeywell Precision Bleaching Sensor System.


RC500 RTU

RC500 RTU 117

RC500 RTUThe RC500 RTU implementation training provides participants the required exposure to plan and implement a system effectively at their site. The course deals with hardware and software components required for installing and configuring the system as well as its integration with Experion® Process Knowledge System (PKS).

FLOWCHART FOR RC500 RTU COURSES

Pre

-req

uis

ite

Co

urs

esIm

ple

men

tati

on


RC-0001RC500 RTU:

Fundamentals -RC500

Implementation with Experion PKS

Integration

RC-0002RC500 RTU:

Fundamentals -RC500

Implementation


IMPLEMENTATIONRC-0001 – RC500 RTU: Fundamentals – RC500 Implementation with Experion PKS Integration

Duration 4.5 days



Overview Course participants will learn the basic concepts and strategies needed to develop guidelines for effective and consistent planning of the RC500 system.


RC-0002 – RC500 RTU: Fundamentals – RC500 Implementation

Duration 4.5 days



Overview Course participants will receive an introduction to planning, operating, integrating and troubleshooting of RC500.


RTU2020


The Honeywell RTU2020 Remote Terminal Unit (RTU) is a powerful, modular and scalable controller capable of all remote automation and control applications. In conjunction with Honeywell’s feature-rich SCADA products, it provides an integrated solution that solves complex remote automation requirements for oil and gas fields. With Experion® SCADA, it helps users visualize what they need to know to simplify management of field assets.

With Honeywell’s new RTU2020 remote terminal unit, users will have “perfect 20/20 vision” into realizing the production potential of their distributed assets through efficient remote monitoring, diagnostic and asset management capabilities.

The RTU2020 training program provides participants the exposure to plan, implement, and maintain a system effectively at site.

Pre

-req

uis

ite

Co

urs

esIm

ple

men

tati

on


RTU-0001-AT RTU2020:

Fundamentals -RTU2020 (with

Experion Integration)

Implementation

RTU2020

FLOW CHART FOR RTU2020 COURSES

RTU2020 121

IMPLEMENTATION RTU-0001-AT - RTU2020: Fundamentals - RTU2020 (with Experion Integration) Implementation

Duration 2 days



Overview Course participants will learn to plan, operate, and integrate RTU2020 system; configureand program RTU2020 for communication with SCADA servers such as Experion and assetmanagement systems like FDM; program RTU2020 for performing metering functionscompliant to AGA standards for gas and API 11.1, API 21.1 standards for liquids; and and configure and commission Wireless I/O in RTU2020.



Safety Manager

Safety Manager 123

Safety ManagerHoneywell’s safety systems lower the cost of safety and improve plant performance by reducing the risk of safety incidents, maximizing production uptime, reducing the cost of compliance and providing productivity tools that help customers manage safety in their plant.

Safety Manager, Honeywell’s next-generation safety system platform, is an effective and reliable safety solution for critical process control, equipment, and process protection. It is the result of a natural evolution from the current proven Fail Safe Controller (FSC®) safety system platform, which has been deployed globally for more than 15 years. Safety Manager combines proven technology with two decades of Honeywell’s process safety management expertise in integrating process safety data, applications, system diagnostics, and critical control strategies.

Honeywell offers training courses that include best practices to implement and optimize the Safety Manager system.

FLOWCHART FOR SAFETY MANAGER COURSES

Pre

-re

qu

isit

e C

ou

rses

Imp

lem

enta

tio

n


SM-4554Safety Manager: Fundamentals -

On-Line ModificationImplementation

SM-4555Safety Manager:

Advanced-Implementation

SM-4551Safety Manager: Fundamentals -Implementation

Pre

-req

uis

ite

Co

urs

esO

per

atio

n

Operation Course


Operation

Pre

-req

uis

ite

Co

urs

esM

ain

ten

ance

Maintenance Course


Maintenance

Ove

rvie

w

Overview Course


Overview

SM-4551

Pre

-req

uis

ite

Co

urs

es


OVERVIEWSM-4553 – Safety Manager: Fundamentals – Overview

Duration 1 day



Overview Course participants will gain an understanding of the different architectures of Safety Manager, an overview of the hardware and software, and its safety concept.


IMPLEMENTATIONSM-4551 – Safety Manager: Fundamentals – Implementation

Duration 4.5 days



Overview Course participants will learn how to implement Safety Manager (SM) projects, obtain knowledge of technical aspects of the system, and do some programming.


SM-4554 – Safety Manager: Fundamentals – On-Line Modification Implementation

Duration 2 days


Prerequisite course (s) • SM-4551

Overview Course participants will learn how to perform On-Line Modifications (OLM), including how to modify an application, upgrade to a newer software release, and adding or removing additional hardware online.


SM-4555 – Safety Manager: Advanced – Implementation

Duration 5 days


Prerequisite course (s) • SM-4551

Overview Course participants will learn about Safety Manager (SM) system’s basic programming, operation, troubleshooting techniques, diagnostics and online changes.


OPERATIONSM-4552 – Safety Manager: Fundamentals – Operation

Duration 1 day



Overview Course participants will learn about operating Safety Manager (SM) software, and the technical aspects of the system, including safety and availability considerations.


Safety Manager 125

MAINTENANCESM-4550 – Safety Manager: Fundamentals – Maintenance

Duration 4.5 day



Overview Course participants will learn to support the Safety Manager system with first-call maintenance.



Safety Manager SC

Safety Manager SC 127

Safety Manager SC Safety Manager SC is a logical evolution of the Safety Manager. It is operationally integrated with Experion® and meets the latest cyber security standards, ensuring safety, simplifying operations and reducing costs by providing a single safety platform to support small packaged applications to large distributed architecture.

Safety Manager SC enables compliance with the latest global safety and cyber security standards, providing maximum reliability, availability and leading to a safe environment, increased production and operational savings. Safety Manager SC provides seamless operational integration with Experion®. The TUV certified design allows for Honeywell’s advanced features such as Sequence of Events, Alarm and Events, Dynamo® Alarm Management, Process Safety Analyzer and Field Device Manager.

Honeywell offers training courses that include best practices to implement and optimize the Safety Manager SC system.


FLOWCHART FOR SAFETY MANAGER SC COURSES

Pre-

requ

isite

C

ours

es

Overview

SMSC-0004Safety

Manager SC: Fundamentals -

Overview

Ove

rvie

wPr

e-re

quis

ite

Cou

rses


SMSC-0001Safety Manager

SC: Fundamentals – Implementation

Impl

emen

tatio

n

SMSC-0001


SC:Fundamentals

- On-LineModification -

Implementation

SMSC-0006Safety ManagerSC: Advanced - Implementation

Pre-

requ

isite

C

ours

es

Operations Course


SC: Fundamentals -Operation

Ope

ratio

nPr

e-re

quis

ite

Cou

rses

Mainenance Course


SC: Fundamentals -Maintenance

Mai

nten

ance


OVERVIEWSMSC-0004 – Safety Manager SC: Fundamentals – Overview

Duration 1 day



Overview Course participants will gain an understanding of the different architectures of Safety Manager SC, an overview of the hardware and software, and its safety concept.


IMPLEMENTATIONSMSC-0001 – Safety Manager SC: Fundamentals – Implementation

Duration 4.5 days



Overview Course participants will learn how to implement Safety Manager SC (SM SC) projects, obtain knowledge of technical aspects of the system, along with some programming.


SMSC-0005 – Safety Manager SC: Fundamentals – On-Line Modification Implementation

Duration 2 days


Prerequisite course (s) • SMSC-0001

Overview Course participants will learn how to perform On-Line Modifications (OLM), including how to modify an application, upgrade to a newer software release, and adding or removing additional hardware online.


SMSC-0006 – Safety Manager SC: Advanced – Implementation

Duration 5 days


Prerequisite course (s) • SMSC-0001

Overview Course participants will learn about Safety Manager SC (SM SC) system’s programming, diagnostics and online changes and how to comply in practice with IEC 61511 when planning, managing and executing these tasks.


OPERATIONSMSC-0003 – Safety Manager SC: Fundamentals – Operation

Duration 1 day



Overview Course participants will learn about operating Safety Manager SC (SM SC) software, and the technical aspects of the system, including safety and availability considerations.



MAINTENANCESMSC-0002 – Safety Manager SC: Fundamentals – Maintenance

Duration 4.5 day



Overview Course participants will learn to support the Safety Manager SC (SM SC) system with first-call maintenance.



Safety Management Systems


Safety Management SystemsUnderstanding and complying with international safety standards IEC 61508/61511 and ISA S84.01 is becoming increasingly critical to process industries. Honeywell’s TÜV-certified Functional Safety Engineering courses introduce participants to the concepts and practical application of safety standards. The courses follow the Safety Lifecycle all the way from SIS specification (hazard and risk analysis, SIL assignment, safety requirements specification) through the design and analysis phases (SIS architectures, SIL verification calculations) to the operations and maintenance phases (assessments and MOC). Successful participants receive the TÜV-issued Functional Safety Engineer certification.

FLOWCHART FOR SAFETY MANAGEMENT SYSTEMS COURSES

Pre

-req

uis

ite

Co

urs

es

Safety Management Systems Course

SMS-4503-CTSafety Mgmt.

Systems : Certification -TÜV Functional Safety

Program IEC 61508 SIL

Saf

ety

Man

agem

ent

Sys

tem

s C

erti

fica

ito

n

Safety Management Systems 133

CERTIFICATIONSMS-4503-CT – Safety Mgmt. Systems: Certification – TÜV Functional Safety Program IEC 61508 SIL

Duration 5 days



Overview Course participants will learn the IEC 61508, IEC 61511 and ISA 84.01 standards and implement its requirements in a structured manner.



TDC

TDC 135

TDCHoneywell’s TDC 3000 system continues to provide large scale distributed control system (DCS) capabilities and offers customers the flexibility to integrate it into the latest Experion® systems.

The Local Control Network (LCN) integrates the Process Manager family of controllers with the TDC 3000 family of operator interface and supervisory modules.

Honeywell offers training courses that include best practices to implement, maintain, operate, and optimize the TDC 3000 system.

TPS (LCN/UCN – GUS/US) –OVERVIEW COURSES FLOW CHART

TDC-3754HPM-FT1.TDC-3300HPM-FT or2. TPS-5722-FT

Pre-

requ

isite

Cou

rses

Overview Course

TPS-PT3376ATPS: Advanced - LCN and UCN Management Administration

1. (TPS-PT030 or TPS-PT055 or TPS-PT065) or2. TDC-3300HPM-FT

TPS-4750TPS: Fundamentals - (GUS/US) APM/HPM

Troubleshooting and Maintenance(LCN/UCN Controllers)

TDC-3670-FTTDC: Fundamentals -

(US) EC/CB/PIU Maintenance (LCN/Hiway Controllers)

TPS-5725TPS: Fundamentals -Process Control for

Plant Operation

TPS-5770-FTTPS: Fundamentals -

(GUS) LCN/UCN Operation

TPS-5770TPS: Fundamentals -


TDC-5900TDC: Fundamentals -

(US) LCN/UCN Operation

TPS-PT075TPS:

Fundamentals -LCN Operation


(GUS) Problem Isolation for Plant Operation

Pre-

requ

isite

Cou

rses

Ove

rvie

w TPS-5738-FT

Impl

emen

tatio

n(L

CN

/UC

N)

Implementation (LCN/UCN - US) Course


(US) Picture Editor Graphics Building Implementation

TDC-3754HPM-FTTDC: Fundamentals -(US) HPM Points and

CL Implementation

TDC-3310UCN-FTTDC: Fundamentals -

(US) Application Module with UCN Implementation

TDC-3757HPM-FT

TDC-3757HRF-FT

TPS-3816TPS: Advanced -

Optimization Techniques For The LCN and UCN Implementation

TDC-3754HRF-FTTDC: Fundamentals - (US)

HPM Points and CL Implementation - Refresher

TDC-3300HPM-FTTDC: Fundamentals -

(US) LCN/UCN with HPM Implementation

1. TDC-3300HPM-FT 1. TDC-3300HPM-FT TDC-3757HPM-FT

Impl

emen

tatio

n(L

CN

/UC

N)

TPS-PT710TPS: Fundamentals - Global User Station

(GUS) System Implementation


Optimization Techniques For The LCN and

UCN Implementation

TPS-5716RF-FT TPS: Fundamentals -

(GUS) HPM Points and CL Implementation -

Refresher


(GUS) HPM Pointsand CL Implementation


(GUS) LCN/UCN Implementation


(GUS) APP Node AM/CL

Implementation

TPS-5711-FTTPS: Fundamentals -Native Window/GUS

Display Builder/Safeview Implementation

TPS-5723-FTTPS: Fundamentals -GUS Display Builder

and Safeview Implementation

TPS-5722RF-FTTPS: Fundamentals -

(GUS) LCN/UCN Implementation -

Refresher

1. TPS-5722-FT or2. TDC-3300HPM-FT

1. TPS-5722-FT or2. (TDC-3300HPM-FT

and TPS-5713-FT)

1. TPS-PT030 or2. TDC-3300HPM-FT or

3. TPS-5722-FT

1. TPS-PT030and

2. TDC-3300APM-FT

1. TPS-PT030 and

2. TPS-4770

1. TDC-3300HPM-FT

TPS-5713-FTTPS: Fundamentals -GUS Native Window

Implementation

TPS-PT030TPS: Fundamentals -LCN Implementation

TPS-5716-FT

TPS-5722-FT

TPS-PT720TPS: Fundamentals -

Global User Station (GUS) Display BuildingImplementation

TPS-0005TPS: Fundamentals - LCN Configuration

Implementation

TPS-0006TPS: Fundamentals - Point Building and

UCN/HPM Implementation

TPS-0007TPS: Fundamentals – HPM Points & CL Configuration and Implementation

TPS-0008TPS: Fundamentals - APP Node AM/CL

Implementation

TPS-0009TPS: Fundamentals

- Picture Editor Graphics Building Implementation Implementation

(LCN/UCN - GUS) Course

Pre-

requ

isite

Cou

rses


Pre-

requ

isite

Cou

rses

Adm

inis

tratio

n

Operation Course

Pre-

requ

isite

Cou

rses

Ope

ratio

n

Maintenance Course

Pre-

requ

isite

Cou

rses

Mai

nte

nan

ce TPS-4770TPS: Fundamentals -

(GUS/US) LCN Maintenance

TDC-512TDC: Fundamentals -Hiway Maintenance


(GUS) LCN/UCN/HPM Maintenance


LCN/APM/HPMMaintenance


(US) HPM Configuration andMaintenance

1. TDC-3300HPM-FT or 2. TPS-5722-FT

1. TPS-PT030 or 2. TPS-PT035 or 3. TPS-PT060 or

4. TPS-PT065

TPS-5729-FT


(GUS) UCN/HPMPoints and CL Implementation


(US) Picture Editor Graphics Building for Plant Operation

TPS-PT065TPS: Fundamentals -HPM Implementation

TPS-PT070TPS: Fundamentals -Custom Functions

Implementation

FlexTraining (FT)

Instructor-Led Training

Notes:

FlexTraining (FT)


Notes:

TPS: Fundamentals - (GUS) LCN/UCN

OverviewTPS

TDC-3300HRF-FTTDC: Fundamentals – (US)

LCN/UCN with HPM Implementation – Refresher

TDC: Fundamentals – (US) UCN/HPM Points and CL

Implementation

TDC: Fundamentals - (US) UCN/HPM Points and CL

Implementation - RefresherTDC


DCS Overview FlexTraining


LCN Introduction Overview

TPS-0004TPS: Fundamentals - LCN/UCN Overview

TPS-PT031TPS: Fundamentals -AM Implementation

1. TPS-0005


(GUS) UCN/HPM Points and CL Implementation

- Refresher

1. TPS-0004 or 2. TPS-0005 or

3. TPS-0014

1. TPS-0004 or2. TPS-0005

TPS-4601-FTTPS: Advanced -

Cable Maintenance

TPS-0014Fundamentals –

LCN and Advance Cable Maintenance


UCN/HPM and Advance Cable Maintenance


TDC-3754HPM-FT1.TDC-3300HPM-FT or2. TPS-5722-FT

Pre-

requ

isite

Cou

rses

Overview Course



TPS-4750TPS: Fundamentals - (GUS/US) APM/HPM

Troubleshooting and Maintenance(LCN/UCN Controllers)




Plant Operation







TPS-PT075TPS:




Pre-

requ

isite

Cou

rses

Ove

rvie

w TPS-5738-FT

Impl

emen

tatio

n(L

CN

/UC

N)



(US) Picture Editor Graphics Building Implementation

TDC-3754HPM-FTTDC: Fundamentals -(US) HPM Points and

CL Implementation

TDC-3310UCN-FTTDC: Fundamentals -

(US) Application Module with UCN Implementation

TDC-3757HPM-FT

TDC-3757HRF-FT







1. TDC-3300HPM-FT 1. TDC-3300HPM-FT TDC-3757HPM-FT

Impl

emen

tatio

n(L

CN

/UC

N)





UCN Implementation



Refresher







Implementation







Refresher



and TPS-5713-FT)


3. TPS-5722-FT

1. TPS-PT030and

2. TDC-3300APM-FT

1. TPS-PT030 and

2. TPS-4770

1. TDC-3300HPM-FT


Implementation


TPS-5716-FT

TPS-5722-FT




Implementation





Implementation


- Picture Editor Graphics Building Implementation Implementation

(LCN/UCN - GUS) Course

Pre-

requ

isite

Cou

rses


Pre-

requ

isite

Cou

rses

Adm

inis

tratio

n

Operation Course

Pre-

requ

isite

Cou

rses

Ope

ratio

n

Maintenance Course

Pre-

requ

isite

Cou

rses

Mai

nte

nan



TDC-512TDC: Fundamentals -Hiway Maintenance









4. TPS-PT065

TPS-5729-FT







Implementation

FlexTraining (FT)


Notes:

FlexTraining (FT)


Notes:


OverviewTPS

TDC-3300HRF-FTTDC: Fundamentals – (US)

LCN/UCN with HPM Implementation – Refresher

TDC: Fundamentals – (US) UCN/HPM Points and CL

Implementation




DCS Overview FlexTraining


LCN Introduction Overview

TPS-0004TPS: Fundamentals - LCN/UCN Overview


1. TPS-0005



- Refresher

1. TPS-0004 or 2. TPS-0005 or

3. TPS-0014

1. TPS-0004 or2. TPS-0005


Cable Maintenance


LCN and Advance Cable Maintenance



TDC 137

IMPLEMENTATIONTDC-3300HPM – TDC: Fundamentals – (US) LCN/UCN with HPM Implementation

Duration 9.5 days



Overview Course participants will learn to operate and configure a TotalPlant Solution Network (TPN), consisting of a Local Control Network (LCN) and a Universal Control Network (UCN) with a High Performance Manager (HPM) controller.

Delivery Options • In-Center Instructor-Led Training• FlexTraining (TDC-3300HPM-FT)

TDC-3300HRF – TDC: Fundamentals – (US) LCN/UCN with HPM Implementation – Refresher

Duration 5 days


Prerequisite course (s) • (TDC-3300HPM or TDC-3300HPM-FT)

Overview Course participants will refresh their skills by reviewing the operation and configuration of the Local Control Network (LCN) and a Universal Control Network (UCN) with an HPM or APM controller (xPM).

Delivery Options • In-Center Instructor-Led Training• FlexTraining (TDC-3300HRF-FT)

TDC-3301 – TDC: Fundamentals – (US) Picture Editor Graphics Building Implementation

Duration 4.5 days



Overview Course participants will learn the techniques for building sophisticated Picture Editor Custom Graphic displays using the Picture Editor function.

Delivery Options • In-Center Instructor-Led Training• FlexTraining (TDC-3301-FT)

TDC-3310UCN – TDC: Fundamentals – (US) Application Module with UCN Implementation

Duration 4.5 days


Prerequisite course (s) • (TDC-3300HPM or TDC-3300HPM-FT) or• (TPS-5722 or TPS-5722-FT

Overview Course participants will learn to optimize processes and reduce costs by configuring Application Module (AM) points, Control Language (CL) programs, and Custom Data Segments.

Delivery Options • In-Center Instructor-Led Training• FlexTraining (TDC-3310UCN-FT)

TDC-3754HPM – TDC: Fundamentals – (US) HPM Points and CL Implementation

Duration 8 days



Overview Course participants will learn to operate and configure the entire range of the High Performance Manager (HPM) point types and to create HPM Control Language (CL) programs.



TDC-3754HRF – TDC: Fundamentals – (US) HPM Points and CL Implementation – Refresher

Duration 4 days



Overview Course participants will refresh their skills reviewing the operation and configuration of the High Performance Manager (HPM) point types and to create HPM Control Language (CL) programs.


TDC-3757HPM – TDC: Fundamentals – (US) UCN/HPM Points and CL Implementation

Duration 9.5 days



Overview Course participants will learn to operate and set up a Universal Control Network (UCN) with the High Performance Manager (HPM).


TDC-3757HRF – TDC: Fundamentals – (US) UCN/HPM Points and CL Implementation – Refresher

Duration 5 days



Overview Course participants will refresh their skills in operating and setting up a Universal Control Network (UCN) with the High Performance Manager (HPM).


TDC-3754HRF – TDC: Fundamentals – (US) HPM Points and CL Implementation – Refresher

Duration 4 days



Overview Course participants will refresh their skills reviewing the operation and configuration of the High Performance Manager (HPM) point types and to create HPM Control Language (CL) programs.


TDC-3757HPM – TDC: Fundamentals – (US) UCN/HPM Points and CL ImplementationDuration 9.5 days



Overview Course participants will learn to operate and set up a Universal Control Network (UCN) with the High Performance Manager (HPM).


TDC-3757HRF – TDC: Fundamentals – (US) UCN/HPM Points and CL Implementation – RefresherDuration 5 days



Overview Course participants will refresh their skills in operating and setting up a Universal Control Network (UCN) with the High Performance Manager (HPM).


TDC 139

OPERATIONTDC-3302 – TDC: Fundamentals – (US) Picture Editor Graphics Building for Plant Operation

Duration 9.5 days



Overview Course participants will learn the techniques for building sophisticated Picture Editor Custom Graphic displays using the Picture Editor function.


TDC-5900 – TDC: Fundamentals – (US) LCN/UCN Operation

Duration 5 days



Overview Course participants will learn the architecture and operation of TotalPlant Solution System Network (TPN), consisting of the Local Control Network (LCN) and the Universal Control Network (UCN).

Delivery Options • On-Site Instructor-Led Training• FlexTraining (TDC-5900-FT)

MAINTENANCETDC-3670 - TDC: Fundamentals – (US) EC/CB/PIU Maintenance

Duration 9.5 days



Overview Course participants will learn to maintain and troubleshoot the Hiway and Extended Controller (EC), Basic Controller (CB), and the PIU Controller.


TDC-3755HPM – TDC: Fundamentals – (US) HPM Configuration and Maintenance

Duration 8 days



Overview Course participants will learn to configure the Universal Control Network (UCN), operate and configure a full range of High Performance Process Manager (HPM) point types.


TDC-512 – TDC: Fundamentals – Hiway Maintenance

Duration 5 days



Overview Course participants will learn the basic system topology from the GUS or the US through to the Hiway network using redundant HGs.



Advanced ApplicationsADVANCED ALARM MANAGEMENT

Poor alarm management is often a key factor leading to incidents and accidents at process plants, resulting in high financial costs and sometimes, even loss of life. Honeywell offers training courses that include best practices needed to design and engineer a good alarm system as well as a software course to assist in effective usage of Advanced Alarm Management tools.

FLOWCHART FOR ADVANCED ALARM MANAGEMENT COURSES

TPA

TPA 141

TPATotalPlant® Alcont is an open, distributed process control system based on a single, modular hardware and software family, providing scalability to address a wide range of requirements from the smallest applications to mill-wide systems.

TotalPlant Alcont provides an easy interface with any process to ensure the process can be controlled in a secure manner from a single user interface. All necessary information to control the process can be accessed through a single monitor by opening several windows simultaneously to view different process areas and to run applications. TotalPlant Alcont also easily shares information with other plant systems and supports third-party applications. It includes a powerful graphic application design environment. Different Alcont generations can be easily integrated into Experion® technology that is designed to control, measure, monitor, and integrate complex processes for industrial plants and mills.

Honeywell offers training courses that include best practices to optimize and maximize production efficiency for the TPA system.

FLOWCHART FOR TPA COURSES

Pre

-re

qu

isit

e C

ou

rses

Mai

nte

nan

ce

Maintenance Course

TPA-32TPA: Advanced -Troubleshooting and Maintenance

TPA-42TPA: Fundamentals -Profibus Interfaces

Maintenance

TPA-30TPA: Fundamentals

-Hardware and Maintenance

Pre

-req

uis

ite

Co

urs

esIm

ple

men

tati

on


TPA-22TPA: FundamentalsControl and Logic

AdvancedImplementation

TPA-20TPA: FundamentalsControl and Logic

Implementation

1. TPA-261. TPA-22 and

2. TPA-24 1. TPA-22 1. TPA-011. TPA-20

TPA-28TPA: Advanced -

Toolbox ApplicationsImplementation

TPA-27TPA: Advanced -

Event-Driven PascalImplementation

TPA-25TPA: FundamentalsEffective Application

EngineeringImplementation


Cyclic PascalImplementation


DisplaysImplementation

Pre

-req

uis

ite

Co

urs

esO

per

atio

n

Operation Course

TPA-01TPA:

Fundamentals -Operation

1. TPA-20 and2. TPA-30

1. TPA-30 1. TPA-20


IMPLEMENTATIONTPA-20 – TPA: Fundamentals – Control and Logic Implementation

Duration 4 days


Prerequisite course (s) • TPA-01

Overview Course participants will learn about TotalPlant Alcont application planning of control and logic loops.


TPA-22 – TPA: Fundamentals – Control and Logic Advanced Implementation

Duration 3 days



Overview Course participants will learn about TotalPlant Alcont application planning of interlocks, cascades and logic sequence loops.


TPA-24 – TPA: Fundamentals – Displays Implementation

Duration 2 days



Overview Course participants will learn about the planning and configuration of displays and pictures of a TotalPlant Alcont system.


TPA-25 – TPA: Fundamentals – Effective Application Engineering Implementation

Duration 2 days


Prerequisite course (s) • TPA-22 and• TPA-24

Overview Course participants will learn to implement applications effectively in an Alcont Project.


TPA-26 – TPA: Fundamentals – Cyclic Pascal Implementation

Duration 3 days



Overview Course participants will learn the fundamentals of Cyclic Pascal programming and creating Pascal applications in the process module.


TPA-27 – TPA: Advanced – Event-Driven Pascal Implementation

Duration 3 days



Overview Course participants will learn the fundamentals of event-driven Pascal programming and creating Pascal applications in the manager module.


TPA 143

TPA-28 – TPA: Advanced – Toolbox Applications Implementation

Duration 3 days



Overview Course participants will learn the fundamentals of using toolbox advanced control applications like fuzzy logic, neural nets and multivariable control.


OPERATIONTPA-01 – TPA: Fundamentals – Operation

Duration 1 day



Overview Course participants will learn the control room functions and how to control the process by using the TotalPlant Alcont operator interface.


MAINTENANCETPA-30 – TPA: Fundamentals – Hardware and Maintenance

Duration 3 days



Overview Course participants will learn the TotalPlant Alcont system structure and maintenance.


TPA-32 – TPA: Advanced – Troubleshooting and Maintenance

Duration 3 days



Overview Course participants will learn the advanced TotalPlant Alcont system maintenance, troubleshooting, and repair.


TPA-42 – TPA: Fundamentals – Profibus Interfaces Maintenance

Duration 2 days


Prerequisite course (s) • TPA-20 and• TPA-30

Overview Course participants will learn the structure and maintenance of the TotalPlant Alcont Profibus Fieldbus.


144 2020 Global HPS Training CatalogueTPA 144

TPS

TPS 145

TPSHoneywell’s TotalPlant Solution (TPS) system integrates TDC 3000 modules with powerful Windows-based Global User Station (GUS) and Application Processing Platform (APP) nodes that connect directly to the Local Control Network (LCN). The GUS provides graphic display capabilities in addition to all Universal Station displays. The APP provides advanced supervisory control as well as a data interface for higher level applications.

The TPS system continues to provide large scale distributed control system (DCS) capabilities and offers customers the flexibility to integrate it into the latest Experion® systems.

Honeywell offers training courses that include best practices to implement, maintain, operate, and optimize the TPS system.

FLOWCHART FOR TDC AND TPS COURSES

Pre-

requ

isite

Cou

rses

Overview Course




Cable Maintenance


Plant Operation







TPS-PT075TPS:




Pre-

requ

isite

Cou

rses

Ove

rvie

w TPS-5738-FT

Impl

emen

tatio

n(L

CN

/UC

N)


TDC-3301-FTFundamentals - (US)

Picture Editor Graphics Building ImplementationTPS-

TDC-3754HPM-FTFundamentals -

(US) HPM Points and CL Implementation

TDC-3310UCN-FTFundamentals -

(US) Application Module with UCN ImplementationTDC

TDC-3757HPM-FT

TDC-3757HRF-FT







TDC-3300HRF-FT

1. TDC-3300HPM-FT 1. TDC-3300HPM-FT

Impl

emen

tatio

n(L

CN

/UC

N)



UCN Implementation



Refresher







Implementation







Refresher



and TPS-5713-FT)


Implementation



Implementation (LCN/UCN - GUS) Course

Pre-

requ

isite

Cou

rses


Pre-

requ

isite

Cou

rses

Adm

inis

tratio

n

Operation Course

Pre-

requ

isite

Cou

rses

Ope

ratio

n

Maintenance Course

Pre-

requ

isite

Cou

rses

Mai

nte

nan



TDC-512Fundamentals -

HiwayMaintenance









4. TPS-PT065







Implementation

FlexTraining (FT)


Notes:

FlexTraining (FT)


Notes:


Overview

TDC: Fundamentals – (US) LCN/UCN with HPM Implementation

– Refresher


Implementation



1.TDC-3300HPM-FT or2. TPS-5722-FT

TDC-3754HPM-FT TDC-3757HPM-FT

TPS-5722-FT

TPS-5716-FT

TPS-0002TPS:

Fundamentals- DCS Overview


- LCN/UCN Overview

TPS-PT035TPS: Fundamentals - LCN Introduction

Overview






Implementation





Implementation


- Picture Editor Graphics Building Implementation



- Refresher


3. TPS-5722-FT

1. TPS-PT030and

2. TDC-3300APM-FT

1. TDC-3300HPM-FT TPS-5729-FT

1. TPS-00051. TPS-PT030

and2. TPS-4770

TPS-4750TPS: Fundamentals - (GUS/US) APM/HPMTroubleshooting and

Maintenance(LCN/UCN Controllers)



1. TPS-0004 or 2. TPS-0005 or

3. TPS-0014

1. TPS-0004 or2. TPS-0005


LCN and Advance Cable

Maintenance



146 2020 Global HPS Training CataloguePr

e-re

quis

iteC

ours

es

Overview Course




Cable Maintenance


Plant Operation







TPS-PT075TPS:




Pre-

requ

isite

Cou

rses

Ove

rvie

w TPS-5738-FT

Impl

emen

tatio

n(L

CN

/UC

N)


TDC-3301-FTFundamentals - (US)

Picture Editor Graphics Building ImplementationTPS-

TDC-3754HPM-FTFundamentals -

(US) HPM Points and CL Implementation

TDC-3310UCN-FTFundamentals -

(US) Application Module with UCN ImplementationTDC

TDC-3757HPM-FT

TDC-3757HRF-FT







TDC-3300HRF-FT

1. TDC-3300HPM-FT 1. TDC-3300HPM-FT

Impl

emen

tatio

n(L

CN

/UC

N)



UCN Implementation



Refresher







Implementation







Refresher



and TPS-5713-FT)


Implementation



Implementation (LCN/UCN - GUS) Course

Pre-

requ

isite

Cou

rses


Pre-

requ

isite

Cou

rses

Adm

inis

tratio

n

Operation Course

Pre-

requ

isite

Cou

rses

Ope

ratio

n

Maintenance Course

Pre-

requ

isite

Cou

rses

Mai

nte

nan



TDC-512Fundamentals -

HiwayMaintenance









4. TPS-PT065







Implementation

FlexTraining (FT)


Notes:

FlexTraining (FT)


Notes:


Overview

TDC: Fundamentals – (US) LCN/UCN with HPM Implementation

– Refresher


Implementation



1.TDC-3300HPM-FT or2. TPS-5722-FT

TDC-3754HPM-FT TDC-3757HPM-FT

TPS-5722-FT

TPS-5716-FT

TPS-0002TPS:

Fundamentals- DCS Overview


- LCN/UCN Overview

TPS-PT035TPS: Fundamentals - LCN Introduction

Overview






Implementation





Implementation


- Picture Editor Graphics Building Implementation



- Refresher


3. TPS-5722-FT

1. TPS-PT030and

2. TDC-3300APM-FT

1. TDC-3300HPM-FT TPS-5729-FT

1. TPS-00051. TPS-PT030

and2. TPS-4770

TPS-4750TPS: Fundamentals - (GUS/US) APM/HPMTroubleshooting and

Maintenance(LCN/UCN Controllers)



1. TPS-0004 or 2. TPS-0005 or

3. TPS-0014

1. TPS-0004 or2. TPS-0005


LCN and Advance Cable

Maintenance



TPS 147

OVERVIEWTPS-0002 – TPS: Fundamentals – DCS Overview

Duration 2 days



Overview Course participants will gain a basic understanding of process control loops and instrumentation, including temperature, level, flow and pressure.


TPS-0004 – TPS: Fundamentals – LCN/UCN Overview

Duration 4 days



Overview This course provides an introduction to the terminology, control philosophy and functions of the TPS System consisting of LCN and UCN with HPM controller.

Delivery Options • In-Center Instructor-Led Training• Asynchronous Training (TPS-0004-AT)• FlexTraining (TPS-0004-FT)

TPS-5738 – TPS: Fundamentals – (GUS) LCN/UCN Overview

Duration 4 days



Overview Course participants will gain a basic understanding of the TotalPlant Solution (TPS) System architecture and hardware.

Delivery Options • In-Center Instructor-Led Training• FlexTraining (TPS-5738-FT)

TPS-PT035 – TPS: Fundamentals – LCN Introduction Overview

Duration 1 day



Overview Course participants will get an overview of the Local Control Network (LCN) for a TotalPlant Solution (TPS) system’s general architecture and hardware layout of the various devices.


IMPLEMENTATIONTPS-0005 – TPS: Fundamentals - LCN Configuration Implementation

Duration 5 days



Overview This course provides implementation Engineers the skills needed to configure TPS System that includes building NCF as well as initializing HM.



TPS-0006 – TPS: Fundamentals - Point Building and UCN/HPM Implementation

Duration 5 days


Prerequisite course (s) • (TPS-0005 or TPS-0005-AT or TPS-0005-FT)

Overview This course will provide experienced system personnel with the skills to configure UCN system that includes NIM and HPM.


TPS-0007 – TPS: Fundamentals – HPM Points & CL Configuration and Implementation

Duration 5 days



Overview This course is designed for personnel who already have a fully implemented TPS system and will be responsible only for building HPM points and writing HPM CL programs from a Global User Station.


TPS-0008 – TPS: Fundamentals - APP Node AM/CL Implementation

Duration 3.5 days



Overview This course provides a hands-on introduction to configuring AM points, CL programs, and Custom Data Segments, then linking them together in supervisory control schemes.


TPS-0009 – TPS: Fundamentals - Picture Editor Graphics Building Implementation

Duration 4.5 days



Overview This course provides techniques for building Picture Editor Custom Displays using the Picture Editor function.


TPS-3816 – TPS: Advanced – Optimization Techniques For The LCN and UCN Implementation

Duration 5 days


Prerequisite course (s) • (TDC-3300HPM or TDC-3300HPM-FT) or• TPS-5722 or TPS-5722-FT)

Overview Course participants will learn about the tools to improve and optimize overall Local Control and Universal Control Networks performances.


TPS 149

TPS-5711 – TPS: Fundamentals – Native Window/GUS Display Builder/Safeview Implementation

Duration 5 days



Overview Course participants will become proficient in working in the Global User Station (GUS) environment with an introduction to the operation and implementation of the Native Window. In addition, they will be able to create displays using the GUS Display Builder and SafeView Window management.


TPS-5713 – TPS: Fundamentals – GUS Native Window Implementation

Duration 1 day



Overview Course participants will become familiar with the Global User Station (GUS) Native Window operating environment.


TPS-5716 – TPS: Fundamentals – (GUS) HPM Points and CL Implementation

Duration 8 days


Prerequisite course (s) • (TPS-5722 or TPS-5722-FT) or• (TPS-5722 or TPS-5722-FT) or• ((TDC-3300HPM or TDC-3300HPM-FT) and (TPS-5713 or TPS-5713-FT))

Overview Course participants will learn how to operate and configure a full range of High Performance Process Manager (HPM) point types and to create HPM Control Language (CL) programs using the Data Entity Builder (DEB) as the configuration tool.


TPS-5716RF-FT – TPS: Fundamentals – (GUS) HPM Points and CL Implementation - Refresher

Duration 4 days


Prerequisite course (s) • TPS-5716 or TPS-5716-FT

Overview Course participants will refresh their skills by reviewing how to operate and configure a full range of High Performance Process Manager (HPM) point types and to create HPM Control Language (CL) programs using the Data Entity Builder (DEB) as the configuration tool.

Delivery Options • In-Center Instructor-Led Training• FlexTraining

TPS-5722 – TPS: Fundamentals – (GUS) LCN/UCN Implementation

Duration 9.5 days



Overview Course participants will learn how to operate and configure a TotalPlant Solution (TPS) System comprising a Local Control Network (LCN), a Universal Control Network (UCN) and a High Performance Process Manager (HPM) controller using the Data Entity Builder (DEB) as the configuration tool.



TPS-5722RF – TPS: Fundamentals – (GUS) LCN/UCN Implementation – Refresher

Duration 5 days


Prerequisite course (s) • (TPS-5722 or TPS-5722-FT)

Overview Course participants will refresh their skills by reviewing the operation and configuration of a TotalPlant Solution (TPS) system comprising a Local Control Network (LCN) and a Universal Control Network (UCN) with a High Performance Process Manager (HPM) controller.

Delivery Options • In-Center Instructor-Led Training• FlexTraining (TPS-5722RF-FT)

TPS-5723 – TPS: Fundamentals – GUS Display Builder and Safeview Implementation

Duration 5 days



Overview Course participants will learn how to configure a SafeView operating environment, and create process schematic displays in the Windows NT environment using the Global User Station (GUS) Display Builder and scripting language.


TPS-5729 – TPS: Fundamentals – (GUS) UCN/HPM Points and CL Implementation

Duration 9.5 days



Overview Course participants will learn how to operate and set up a Universal Control Network (UCN) with a High Performance Process Manager (HPM) using the Global User Station (GUS) and the Data Entity Builder (DEB) as the configuration tool.


TPS-5729RF – TPS: Fundamentals – (GUS) UCN/HPM Points and CL Implementation – Refresher

Duration 5 days



Overview Participants will get a refresher course on how to operate and set up a Universal Control Network (UCN) with a High Performance Process Manager (HPM) using the Global User Station (GUS) and the Data Entity Builder (DEB) as the configuration tool.

Delivery Options • In-Center Instructor-Led Training• FlexTraining (TPS-5729RF-FT)

TPS-5756 – TPS: Fundamentals – (GUS) APP Node AM/CL Implementation

Duration 4.5 days


Prerequisite course (s) • (TPS-5722 or TPS-5722-FT) or• (TPS-5722 or TPS-5722-FT) or• ((TDC-3300HPM or TDC-3300HPM-FT) and (TPS-5713 or TPS-5713-FT))

Overview Course participants will learn to optimize processes and reduce costs by configuring the Application Module (AM) points, Control Language (CL) programs, and Custom Data Segments, then linking them together in supervisory control schemes.


TPS 151

TPS-PT030 – TPS: Fundamentals – LCN Implementation

Duration 5 days



Overview Course participants will learn how to configure a Local Control Network (LCN) system.


TPS-PT031 – TPS: Fundamentals – AM Implementation

Duration 4 days


Prerequisite course (s) • TPS-PT030

Overview Course participants will learn how to implement an Application Module (AM) within a Local Control Network (LCN) and Universal Control Network (UCN) environment.


TPS-PT065 – TPS: Fundamentals – HPM Implementation

Duration 5 days


Prerequisite course (s) • TPS-PT030 and• TPS-4770

Overview Course participants will learn how to configure a Universal Control Network (UCN) system that includes a Network Interface Module (NIM) and High Performance Process Manager (HPM).


TPS-PT070 – TPS: Fundamentals – Custom Functions Implementation

Duration 3 days


Prerequisite course (s) • TPS-PT030 or• (TDC-3300HPM or TDC-3300HPM-FT) or• (TPS-5722 or TPS-5722-FT)

Overview Course participants will learn how to develop custom functions within an existing Local Control Network (LCN) Area Database.


TPS-PT710 – TPS: Fundamentals – Global User Station (GUS) System Implementation

Duration 4 days



Overview Course participants will learn how to implement a Global User Station (GUS) on an existing Local Control Network (LCN) system.


TPS-PT720 – TPS: Fundamentals – Global User Station (GUS) Display Building Implementation

Duration 4 days



Overview Course participants will learn to implement Global User Station (GUS) displays using GUS Basic Scripting. Areas of emphasis include best practice guidelines for performance displays.



ADMINISTRATIONTPS-PT3376A – TPS: Advanced – LCN and UCN Management Administration

Duration 5 days


Prerequisite course (s) • (TPS-PT030 or TPS-PT055 or TPS-065)• (TDC-3300HPM or TDC-3300HPM-FT)

Overview Course participants will gain a deeper understanding of system operations and database management.


OPERATIONTPS-5725 – TPS: Fundamentals – Process Control for Plant Operation

Duration 2 days



Overview Course participants will learn the preliminary skills for process control operators involving process control loops, instrumentation, temperature, level, flow and pressure.


TPS-5726 – TPS: Fundamentals – (GUS) Problem Isolation for Plant Operation

Duration 3 days



Overview Course participants will learn the skills necessary to maintain good process control systems, such as how pressure, level, flow and temperature loops operate.


TPS-5770 – TPS: Fundamentals – (GUS) LCN/UCN Operation

Duration 5 days



Overview Course participants will learn how to operate a TotalPlant Solution (TPS) System comprising the Local Control Network (LCN) and the Universal Control Network (UCN).

Delivery Options • On-Site Instructor-Led Training• FlexTraining (TPS-5770-FT)

TPS-PT075 – TPS: Fundamentals – LCN Operation

Duration 2 days



Overview Course participants will learn about the Local Control Network (LCN) operational effects that the hardware choices have on the process under control.


TPS 153

MAINTENANCETPS-0014 – TPS: Fundamentals – LCN and Advance Cable Maintenance

Duration 4.5 days


Prerequisite course (s) • (TPS-0004 or TPS-0004-AT or TPS-0004-FT) or• (TPS-0005 or TPS-0005-AT or TPS-0005-FT)

Overview This course provides skills to identify LCN hardware, troubleshoot and resolve errors, perform preventive maintenance on the LCN, and use a TDR.

Delivery Options • In-Center Instructor-Led Training• Asynchronous Training (TPS-0014-AT)

TPS-0015 – TPS: Fundamentals – UCN/HPM and Advance Cable Maintenance

Duration 5 days


Prerequisite course (s) • (TPS-0004 or TPS-0004-AT or TPS-0004-FT) or• (TPS-0005 or TPS-0005-AT or TPS-0005-FT) or• (TPS-0014 or TPS-0014-AT)

Overview This course provides skills to identify UCN hardware, troubleshoot and resolve errors, perform preventive maintenance on the UCN, use a TDR and Relcom Carrier Band Tester.

Delivery Options • In-Center Instructor-Led Training• Asynchronous Training (TPS-0015-AT)

TPS-4601 – TPS: Advanced – Cable Maintenance

Duration 4 days



Overview Course participants will learn the advanced skills to detect, isolate, and correct TDC3000 Cable problems.


TPS-4750 – TPS: Fundamentals – (GUS/US) APM/HPM Troubleshooting and Maintenance

Duration 8 days



Overview Course participants will learn about both the hardware and software facets of the Process Manager (PM)/ Advanced Process Manager (APM)/ High Performance Process Manager (HPM) control node.


TPS-4770 – TPS: Fundamentals – (GUS/US) LCN Maintenance

Duration 5 days



Overview Course participants will learn how to maintain and support the local control network (LCN) and its primary nodes and build confidence to support a TotalPlant Solution (TPS) system.



TPS-5739 – TPS: Fundamentals – (GUS) LCN/UCN/HPM Maintenance

Duration 4.5 days


Prerequisite course (s) • (TDC-3300HPM or TDC-3300HPM-FT) or• (TDC-5722 or TDC-5722-FT)

Overview Course participants will learn to maintain the Universal Control Network (UCN), High Performance Process Manager (HPM), and the Network Interface Module (NIM) hardware components.


TPS-PT080 – TPS: Fundamentals – LCN/APM/HPM Maintenance

Duration 4 days


Prerequisite course (s) • TPS-PT030 or • TPS-PT035 or• TPS-PT060 or• TPS-PT065

Overview Course participants will get an increased understanding of the maintenance aspects of the Universal Control Network (UCN) Systems.


TPS 155

Web Monitoring Systems


Web Monitoring Systems Honeywell’s ProWeb is a camera-based web monitoring system that records the moving paper web and quickly processes and analyses the recorded images in real-time. The Web Monitoring Systems (WMS) help customers detect and visualize the causes of breaks like trim squirt dirt build-up, slime spots and dirty felts and wires. The camera’s film precisely identifies the problem and helps the operator quickly find the reasons for the process disturbances. Honeywell combines latest technology with process knowledge to help customers reduce downtime and increase their production efficiency.

Honeywell offers training courses that include best practices to optimize and maximize production efficiency for the ProWeb system.

FLOWCHART FOR WMS COURSES

Pre

-req

uis

ite

Co

urs

esM

ain

ten

ance

Maintenance Course

WMS-0001Web Monitoring

System: Fundamentals -

WMS 4G Maintenance

Web Monitoring Systems 157

MAINTENANCEWMS-0001 – Web Monitoring System: Fundamentals – WMS 4G Maintenance

Duration 2 days



Overview Course participants will learn to administrate and maintain the WMS 4G system.



Gas Pressure Regulation

Gas Pressure Regulation 159

Gas Pressure RegulationHONEYWELL GAS TECHNOLOGIES (HGT)

Honeywell Gas Technologies (HGT) offers industry leading gas control, measurement and analysis equipment to gas utilities and other users around the world. It offers expertise along the entire gas supply chain, with reliable products and systems that enable users to exercise full control over their regulating and measuring needs.

All leading technologies are incorporated to provide complete solutions for the most demanding applications. This leads to reduced uncertainty, higher reliability, minimal risk and lower maintenance costs.

FLOWCHART FOR HGT COURSES

Pre

-req

uisi

te

Cou

rses

Pre

-req

uisi

te

Cou

rses

Ope

ratio

nIm

plem

enta

tion

Operation Course


Pre

-req

uisi

te

Cou

rses

Ove

rvie

w

Overview Course

HGT-0001HGT:

Fundamentals -Gas Pressure

Regulation andSafety Devices

Overview

HGT-0002HGT: Fundamentals -

Gas PressureRegulation andSafety Devices

EngineeringPlanning Overview

HGT-0005HGT:

Fundamentals -Gas OdourizingPlants Operation

1. HGT-0009 and2. HGT-0010

1. HGT-0009

HGT-0010HGT:


Regulation andSafety Devices -Intensive Course

No. 4 Implementation

HGT-0009HGT:




HGT-0008HGT:




HGT-0007HGT:




HGT-0006HGT:

Fundamentals -Underground

Compact UnitsImplementation

HGT-0004HGT:


Regulation and Safety Devices -

Automation Systems

Implementation

HGT-0003 HGT:

Fundamentals -Gas Pressure Regulation and Safety Devices

"M" - HGT Groups 300/400 Implementation


OVERVIEWHGT-0001 – HGT: Fundamentals – Gas Pressure Regulation and Safety Devices Overview

Duration 2 days



Overview This course provides participants the basics of • Design and operation of gas pressure regulators • Design and operation of safety devices • Practical training for beginners (no maintenance)


HGT-0002 – HGT: Fundamentals – Gas Pressure Regulation and Safety Devices Engineering Planning

Duration 2 days



Overview This course provides participants the basics of • Determination of gas pressure regulators and systems• Function of safety devices• Introduction of conception understanding of plants


IMPLEMENTATIONHGT-0003 – HGT: Fundamentals – Gas Pressure Regulation and Safety Devices “M” – Groups 300/400 Implementation

Duration 2 days



Overview This course provides participants the basics of• Design and operation of gas pressure regulators • Design and operation of safety devices• Practical training


HGT-0004 – HGT: Fundamentals – Gas Pressure Regulation and Safety Devices – Automation Systems Implementation

Duration 2 days


Prerequisite course (s) • HGT-0009 and• HGT-0010

Overview This course provides participants the basics of• Design and operation of pneumatically and electrically controlled gas pressure regulators • Design and operation of flow regulating valves• Practical training



HGT-0006 – HGT: Fundamentals – Underground Compact Units Implementation

Duration 1 day


Prerequisite course (s) • HGT-0009

Overview This course provides participants the basics of• Design of below-ground compact modules• Function and operation• Practical training


HGT-0007 – HGT: Fundamentals – Gas Pressure Regulation and Safety Devices – Intensive Course No. 1 Implementation

Duration 2 days



Overview This course provides participants the basics of• Design and operation of gas pressure regulators• Design and operation of safety devices• Practical training (inclusive maintenance)



Duration 2 days






Duration 2 days







Duration 2 days





OPERATIONHGT-0005 – HGT: Fundamentals – Gas Odourizing Plants Operation

Duration 1 day



Overview This course provides participants the basics of• Design and operation of odourizing plants• Function• Practical training



Industrial Applications/Topics


Industrial Applications/TopicsINDUSTRIAL TOPICS

The Industrial Topics training program focuses on a wide range of industrial training options that are specific to participants’ automation applications and solutions.

FLOWCHART FOR INDUSTRIAL TOPICS COURSES

Pre

-req

uisi

te

Cou

rses

Ove

rvie

w

Overview Course

INDT-0002Industrial Topics: Fundamentals -

Data Communications

and Control Networks Overview

INDT-REFECONIndustrial Topics: Fundamentals -

Refinery Economics Overview

INDT-0008-ATIndustrial Topics: Fundamentals -Power and

Grounding Overview

Industrial Applications/Topics 165

OVERVIEWINDT-0002 – Industrial Topics: Fundamentals – Data Communications and Control Networks Overview

Duration 3.5 days



Overview Course participants will learn the basic principles of commonly used industrial communication technologies such as Modbus, HART, ASI, CANBus/ DeviceNet, Profibus, Foundation Fieldbus, Industrial Ethernet, Wireless and OPC.


INDT-0008-AT – Industrial Topics: Fundamentals - Power and Grounding Overview

Duration 1.5 days



Overview Course participants will learn about AC power distribution and AC quality, Grounding Principles and Common Ground Types, plan Honeywell Controller Grounding, installation of Cables, and understand grounding requirements for Honeywell DCS and Safety Systems.


INDT- REFECON – Industrial Topics: Fundamentals – Refinery Economics Overview

Duration 4 days



Overview Course participants will learn the fundamentals of the oil refining business.



Information Systems Solutions

Information Systems Solutions 167

Information Systems SolutionsINFORMATION SYSTEMS

Honeywell provides training courses for the study of computer systems, software and hardware related to participants’ automation investment. The training primarily focuses on general topics such as Operating Systems, Hardware, Networking, Software, IT Security, and Cisco Switching.

FLOWCHART FOR INFORMATION SYSTEMS COURSES

Pre

-req

uisi

te

Cou

rses

Pre

-req

uisi

te

Cou

rses

Adm

inis

trat

ion

Impl

emen

tatio

n



Pre

-req

uisi

te

Cou

rses

Ove

rvie

w

Overview Course

IS-OSS8003Information Systems:

Fundamentals - Plant Security Governance

and ManagementOverview

IS-2273Information Systems:

Fundamentals -Windows 2003

Server Configurationand Administration

IS-1110Information

Systems:Fundamentals -

Networking Implementation

IS-1111Information

Systems:Fundamentals -

FTE/CISCO Implementation


Fundamentals -Process Control Network Design Implementation


Fundamentals -Security Incident

Handling Implementation


OVERVIEWIS-OSS8003 – Information Systems: Fundamentals – Plant Security Governance and Management Overview

Duration 3 days



Overview Course participants will get a complete overview of all aspects of IT security, and how to organize it based on the ISO 27001 standard, including a possible certification path.


IMPLEMENTATIONIS-1110 – Information Systems: Fundamentals – Networking Implementation

Duration 2 days



Overview Course participants who are new to computer networking will learn the principles of networking.


IS-1111 – Information Systems: Fundamentals – FTE/CISCO Implementation

Duration 1 day



Overview Course participants will learn the fundamentals of using Honeywell’s Fault Tolerant Ethernet (FTE).


IS-OSS8001 – Information Systems: Fundamentals – Process Control Network Design Implementation

Duration 3 days



Overview Course participants will learn to design and protect a Fault Tolerant Ethernet (FTE) network and a process control network (PCN).


IS-OSS8002 – Information Systems: Fundamentals – Security Incident Handling Implementation

Duration 1 day



Overview Course participants will learn to prepare for the moment when defenses fail and administrators have to act – in short, how to contain a security incident, eradicate the cause, and restore the system.


Information Systems Solutions 169

ADMINISTRATIONIS-2273 – Information Systems: Fundamentals – Windows 2003 Server Configuration and Administration

Duration 5 days



Overview Course participants will learn the skills required to manage accounts and resources, maintain server resources, monitor server performance and safeguard data in a Microsoft Windows Server 2003 environment.



Terminal Automation

Terminal Automation 171

Terminal AutomationENRAF

Honeywell Enraf designs, produces, commissions, services and maintains precise instruments for all tanks – large and small, heated and refrigerated, spherical and cylindrical, fixed and floating roof, above and underground, used for crude products and chemicals and in the Middle East and the Arctic.

With expertise of more than 50 years, Honeywell Enraf has provided consistently excellent solutions for bulk storage tank gauging. It has gained a worldwide reputation for its precise, safe and reliable tank gauging equipment for obtaining product level and level alarms, average temperature and density, temperature and density profiles, and pressure and water interface.

Powerful data acquisition software enables real-time monitoring of inventory data, allowing safe tank operations and precise product transfers.

Honeywell offers training courses that include best practices to implement, maintain, and optimize the Enraf system.

FLOWCHART FOR ENRAF COURSES

Pre

-req

uisi

te

Cou

rses

Mai

nten

ance

Maintenance Course

ENR-ST2-TGEnraf:

Fundamentals -Tank Gauging Instruments Maintenance

ENR-ST2-TIEnraf:

Fundamentals -Tank Inventory

Systems Maintenance

ENR-ST1-TGEnraf:


ENR-ST3-TGEnraf:


ENR-ST1-TIEnraf:


Systems Maintenance

ENR-ST3-TIEnraf:


Systems Maintenance


MAINTENANCEENR-ST1-TG – Enraf: Fundamentals – Tank Gauging Instruments Maintenance

Duration 5 days



Overview This course provides in-depth knowledge on application, operation, service and maintenance, diagnostics and repairs, advanced commissioning and calibration of tank gauging instruments.


ENR-ST2-TG – Enraf: Fundamentals – Tank Gauging Instruments Maintenance

Duration 5 days





ENR-ST3-TG – Enraf: Fundamentals – Tank Gauging Instruments Maintenance

Duration 5 days





ENR-ST1-TI – Enraf: Fundamentals – Tank Inventory Systems Maintenance

Duration 5 days



Overview This course provides in-depth knowledge on application, operation, supervising and maintaining tank inventory systems.



Duration 5 days





Terminal Automation 173


Duration 5 days






UOP

UOP 175

UOPFor nearly 100 years, UOP a Honeywell Company has been the leading international supplier and licensor for the petroleum refining, gas processing, petrochemical production and major manufacturing industries. As a respected pioneer, the company is responsible for developing and implementing some of the most useful, original technologies in the world.

Today, more than 60 percent of the world’s gasoline and 85 percent of biodegradable detergents are made using UOP technology.

With almost a century of experience in refining and petrochemicals, UOP brings world-class training courses and tools designed to empower participants’ teams and drive effective, efficient and safe operations.

FLOWCHART FOR UOP COURSES

Pre

-req

uis

ite

Co

urs

esIm

ple

men

tati

on


UOP-0001-SUOP:

Fundamentals -Engineering Design

Seminar (EDS)Implementation

UOP-0002-SUOP:

Fundamentals -Process Design Implementation -

Seminar

UOP-0004-SUOP:

Fundamentals -HF Alkylation

Process Implementation -

Seminar

UOP-0005-SUOP:

Fundamentals -Butamer Process Implementation -

Seminar

UOP-0008-SUOP:

Fundamentals --Fixed-Bed

Platforming Process Implementation -

Seminar

UOP-0013-SUOP:

Fundamentals -Unicracking

Process Implementation -

Seminar

UOP-0006-SUOP:

Fundamentals -CCR Platforming

Process -Standard for CycleMax

and Atmospheric Implementation -

Seminar

UOP-0007-SUOP:

Advanced -CCR Platforming Process

Implementation -Seminar

UOP-0014-WSUOP:

Fundamentals -Platforming Simulator

Troubleshooting and Implementation -

Workshop

UOP-0015-WSUOP:

Fundamentals -Fluid Catalytic

Cracking (FCC) Process Simulator

Troubleshooting and Implementation -

Workshop

UOP-0010-SUOP:

Advanced -Fluid Catalytic Cracking

(FCC) Process Implementation -

Seminar

UOP-0009-SUOP:

Fundamentals -- Fluid Catalytic Cracking (FCC)

Standard Process Implementation -

Seminar


IMPLEMENTATIONUOP-0001-S – UOP: Fundamentals – Engineering Design Seminar (EDS) Implementation

Duration 41 days



Overview Course participants will learn the fundamentals of refining process design.


UOP-0002-S – UOP: Fundamentals – Process Design Implementation – Seminar

Duration 5 days



Overview Course participants will gain practical insights into the principles of process design.


UOP-0004-S – UOP: Fundamentals – HF Alkylation Process Implementation – Seminar

Duration 3 days



Overview Course participants will gain an understanding of the HF Alkylation Process and operation of the unit.


UOP-0005-S – UOP: Fundamentals – Butamer Process Implementation – Seminar

Duration 2 days



Overview Course participants will learn the fundamentals of UOP Butamer Process.


UOP-0006-S – UOP: Fundamentals – CCR Platforming Process – Standard for CycleMax and Atmospheric Implementation – Seminar

Duration 4 days



Overview Course participants will learn the principles of catalyst regeneration and the regeneration tower operation, including how to optimize catalyst performance and maximize catalyst life.


UOP 177

UOP-0007-S – UOP: Advanced – CCR Platforming Process Implementation – Seminar

Duration 4.5 days



Overview Course participants will gain an in-depth understanding of the CCR Platforming unit.


UOP-0008-S – UOP: Fundamentals – Fixed-Bed Platforming Process Implementation – Seminar

Duration 3 days



Overview Course participants will learn the operation, maintenance and troubleshooting of the UOP Fixed-Bed Platforming unit, with emphasis on optimizing catalyst performance and maximizing catalyst cycle life.


UOP-0009-S – UOP: Fundamentals – Fluid Catalytic Cracking (FCC) Standard Process Implementation – Seminar

Duration 4 days



Overview Course participants will learn the typical operation, control, design, and troubleshooting of FCC units during startup, normal operation, shutdown, and emergencies.


UOP-0010-S – UOP: Advanced – Fluid Catalytic Cracking (FCC) Process Implementation – Seminar

Duration 4.5 days



Overview Course participants will learn in-depth about process variables, controlling the heat balance, catalyst functionality and management, process optimization, fluidization, and troubleshooting.


UOP-0013-S – UOP: Fundamentals – Unicracking Process Implementation – Seminar

Duration 4 days



Overview Course participants will get in-depth understanding of the UOP Unicracking Process, which includes both theory and practical applications.



UOP-0014-WS – UOP: Fundamentals – Platforming Simulator Troubleshooting and Implementation – Workshop

Duration 4 days



Overview Course participants will achieve an insight into the dynamic cause-and-effect relationships of the UOP Platforming Process for normal operation, shut down, and emergency procedures.


UOP-0015-WS – UOP: Fundamentals – Fluid Catalytic Cracking (FCC) Process Simulator Troubleshooting and Implementation – Workshop

Duration 3 days



Overview Course participants will achieve an insight into the normal operation, shut down, and emergency procedures of the UOP Fluid Catalytic Cracking (FCC) Process.


UOP 179

Wireless


WirelessONEWIRELESS

Course participants will be able to understand how Honeywell’s OneWireless™ network provides industrial manufacturers with a multifunctional network that can support applications with end-to-end security. The participants will be guided on connecting the OneWireless network to a DCS system and integrating OneWireless with the Experion® Process Knowledge System (PKS). Participants will also learn how to commission and configure Honeywell’s XYR 6000 family of industrial wireless transmitters that enable automated variable monitoring in areas difficult to access with hard-wired devices.

FLOWCHART FOR ONEWIRELESS COURSES

Pre

-req

uisi

te

Cou

rses

Impl

emen

tatio

n


OW-0002OneWireless:

Fundamentals – ISA100

Wireless System Implementation

Wireless 181

OVERVIEWOW-0001-LW – OneWireless: Fundamentals – Integration Overview

Duration 2 hours



Overview Course participants will learn the concepts of the OneWireless™ System, operate the system, smoothly transition to wireless technology and explore how OneWireless could be used for new measurement requirements.

Delivery Options • Live Webinar

IMPLEMENTATIONOW-0002 – OneWireless: Fundamentals – ISA100 Wireless System Implementation

Duration 3.5 days



Overview Course participants will learn to configure/monitor the Wireless Device Manager and Field Device Access Point, provisioning devices used to join the OneWireless System, implement an XYR 6000 device, and build a control system point using OPC UA and/or Modbus to access OneWireless device data.



NOTES 183

Experion®, TotalPlant®, Uniformance®, Fail Safe

Controller (FSC®), MXOpen®, Business Flex® and

UniSim® are registered trademarks of Honeywell

International Inc.

Experion MX™, MXProLine™, Profit Suite™ and

Safety Manager™ are trademarks of Honeywell

International Inc.

All other trademarks mentioned in the document

are trademarks of their respective owners.

For More InformationTo learn more about Automation College

and view a list of global locations,

visit www.honeywellprocess.com/en-US/training

or email [email protected]

Honeywell Process SolutionsAutomation College

www.honeywellprocess.com

January 2020© 2020 Honeywell International Inc. Right to changes reserved.

Documents

HONEYWELL PROCESS SOLUTIONS TRAINING – YOUR PARTNER … · HONEYWELL PROCESS SOLUTIONS TRAINING – YOUR PARTNER IN EXCEEDING PERFORMANCE GOALS Training Programs in: US, Canada