Simulation Monitors

w w w. G D d i s p l a y s y s t e m s . c o m

Your High Quality Simulation Display Solution

Why pay the price of a fully-certified monitor

for your simulator when a low cost monitor

with the same form, fit and function will perform equally well?

w w w. G D d i s p l a y s y s t e m s . c o m

Select a standard or custom-designed Bezel, including but-tons, rotary encoders, switches, finger guards, hardware, etc.

Select from a wide range of OSD keypad styles (membrane, silicon, backlit, NVIS, mechanical, etc.), locations (front, rear, side) and/or interfaces (RS-232, RS-485, I2C, USB) to facilitate desired fit, form and function.

Select a standard or custom-designed Enclosure to meet spe-cific requirements (e.g., dimensions, I/O interface connectors, MIL and/or DO-rated standards).

BenefitsSimulation Monitor VueSim™ “Smart” Display

• For simulators that require multiple display heads, flight simula-tor manufacturer may require multiple processors (hosts) or expensive controls to be able to support multiple monitors. Overall system cost may be less flexible and more expensive than smart display.

• I/O (ARINC 429, GPIO, MIL-STD-1553, etc.) must be handled independently by flight simulator manufacturer.

• Lower recurring unit cost since processor is not required.

• Easier to replace with “like or equivalent” model.

• Customer retains responsibility for all screen development and content.

General Digital’s team of electrical, mechanical, optical and software engineers can design or integrate Other hardware, software/firmware, electronics, etc upon request.

Our monitors can be equipped to meet virtually any com-mercial, industrial, avionic or military Power requirement with a variety of internal or external power supplies, converters or adaptors and I/O interfaces.

Consumer-grade monitors are readily affordable and avail-able, but not well suited to applications requiring value-add display enhancements, configuration control, or agency or military certifications.

Industrial-grade monitors are mid-range priced and provide excellent performance. They have a long product life cycle that is better suited to display enhancements, configuration control, and applications requiring agency or military certification. Fewer design changes makes documentation and field support easier for customer.

Military-grade monitors are top of the line, offering the best configuration control, performance and product life cycle. Ideal for applications requiring enhancements, with configuration control and agency/military certifications.

Standard Luminance monitors are ideal for cost-sensitive programs that require only basic functionality.

High Brightness | Sunlight Readable | NVIS | Dual Mode monitors offer one or more of the following value-add enhancements:

• Enhanced LED backlight

• Tailored P-frame/light guide

• Custom display enclosure

• Special display film stack

•Optical bonding

The benefits of Silicone and UV Optical Bonding are numerous:

•Minimizes internal reflections and improves contrast in high ambient lighting environments

• Eliminates moisture and condensation in high humidity environments

• Provides added protection for the LCD

A wide range of commercial, industrial and military grade Video Controllers are available to meet nearly any appli-cation-specific requirements for features, source support, and performance (optical & environmental).

VGA | HDMI | DVI | DisplayPort | HD-SD Component | S-Video | HD-SDI

General Digital offers a wide variety of Display Overlays and underlays to fine tune your monitor, most of which can be used concurrently.

Heater with programmable controller extends the cold tem-perature operation range for the display. Customized hardware and firmware available.

A vast range of Touch Technologies are available for integration, including resistive, capacitive (surface and PCAP), SAW, and IR.

Choose from an ample assortment of Vandal Shields, including glass (soda lime, borafloat, chemically strengthened, Gorilla) and various plastics, which will meet specific optical and durability requirements.

A selection of Coatings (e.g., antiglare, antireflective, hydro-phobic, IR blocking) are available to improve optical perfor-mance.

Improve optical performance with Films at the surface of the display, or by modifying the OEM film stack behind the display. Film options include antireflective, antiglare, privacy, IR-block-ing, reflectors, brightness enhancing, and more.

ITO or micro-mesh EMI Filters are available to reduce EMI emissions to meet UL or MIL-STD-461 requirements.

Numerous Specialty Enhancements are available upon request to meet specific customer requirements.

General Digital regularly integrates a wide range of display technologies from virtually all of the top OEM manufacturers into our standard, modified and custom monitor products.

Configuration Considerations