HOND-i INTEGRATED TECHNOLOGIES PVT LTD

Students Projects:

Wireless pc communication using RFID:

Micro controller used with rfid and serial port of pc are used rf connection to pc.programm is developed

to networked pc and equipment communication in range.

AVR-JTAG:

This is debugging tool which is used in development of microcontrol of avr series.this device can be used

as programmer.

LARYNX:

Micro controller used with voice IC to develop larynx which is used for deaf and dumb people education.

SMART CARD:

Fuel pumping machine speed of aeroplane is controlled remotely by rfid:

Micro controller used with rf and Fuel pumping machine remotely controlled .

MMC CARD:

Micro controller used to develop multimedia card reader interface to PC

DSPIC:

DSPIC30f2010 is used to develop motor speed control using PWM method.

OSCILLOSCOPE:

Using digital signal processing interface to PC by micro controller PC based oscilloscope is developed.

RFID based home appliance control:

Micro controller used with rf and home appliances are controlled in 100 meter range .

INFRARED CONTROLLED HOME APPLIANCE CONTROL:

Micro controller used with IR sensors to control home appliances remotely.

GSM CAR:

Micro controller used with GSM and GPS and RF to develop vehicle tracking system.

USB RFID:

Micro controller used with USB RFID to interact with different PC.

Alternate to GPS sensor:

Micro controller used with rfid and developed alternate way for GPS sensor .

BUS NUMBER:

Micro controller used with RF and same equipments in bus .as bus arrives to stop ,at the stop bus details

are displayed detail about bus anounced automatically.

Animal tracking wireless camera:

Micro controller used with rf and vedeo camera.wild animals and valuable tree which are in problem are

detected.

Agriculture supporting burglar make sound and light to drive wild animals:

Micro controller used with stepper motor ,Voice IC ,lights.

GEN RAIN:

Micro controller used with A/D convertor and generator which is used to measure the rain speed and

transmit wirelesly.

WIRELESS:

Micro controller used with RFID and cetralised hub is used. free messages can be send.If charges given

,then cetralised hub connected with mobile or GSM modem any where in world any mobile we can send

message using this RFID only.

PC BASED SIGNAL GENERATOR AND MULTIMETER:

Micro controller used with DAC and ADC interfacing with PC . PC based signal generator is developed.

PC INTERFACED POWER SUPPLY:

Micro controller used with PC and power supply. the supply of power controlled in pc based simulator.

the remote area power supply can be controlled by wireless RFID.

DSPIC BASED NUMBER DIALING CAPABLE WALKY TALKY:

DSPIC 30f2010 Micro controller used with voice controlled IC Number dialing facility walky talky is

developed.It is higly security supporter.

SMART CARD BASED COMMERCIAL PHONE REPLACES COIN:

Micro controller used to develop smart card based public phone system.

MESSAGE SENDING COIN PHONE (50 paise charge for message:

Micro controller used to message sending public coin phone.

CONVERT SERIAL PORT TO RFID, SPI, I2C, CAN, USB, RS232:

Micro controller used to develop all other protocol interface to pc using RS232 port.

Sampling theorem demo show by software:

A demo software is developed which shows sampling theorem.

FLYING FIREGUN REMOTELY CONTROLLED BY RFID:

Micro controller used develop a remotely controlled flying gun for military purpose.

INTELLIGENT BURGLAR DETECTOR SENDS MESSAGE AUTOMATICALLY TO

ITS OWNER:

Micro controller used to develop a machine detects burglar entered to our house and send message to

our mobile.

HOUSE EQUIPMENT CONTROL USING MOBILE:

Micro controller used with mobile all house equipments are controlled by your mobile.

DIGITAL WIRELESS WIND METER FOR SHIPPING PEOPLE:

Micro controller used RFID measures wind speed and send the digital value to PC via RFID.

AUTOMATIC CAR PARKING SYSTEM:

Micro controller used with RFID and mobile to manage automatic car parking management system.

FIRE CONTROL SYSTEM OF POWER PLANT:

Micro controller used with wireless RFID and mobile and landline which is a highly security providing

power plant fire control system.

AUTOMATED POWER SUPPLY USING MAGNET:

Micro controller used with automated power supply by magnets to generate power.

Robot 877 Introducing our new PIC16F877 Robot, the new Roboc Robot 877 is an exciting, easy to use and fully programmable robot.The robot used as wirelessly controlled tilling machine demo for agriculture. Based on the very popular PIC16F877 microcontroller from Microchip, this robot can be programmed to perform a number of instructions. A series of microswitches are used for collision detection, together with a couple of dc motors to control robot movement. A row of optical sensors are mounted on the base for tracking operations.

Together with a ready to run LCD installed on the top for feedback and information display.

Enter the exciting world of robotics with this simple to use and program robot. Code can be developed, quickly and easily with the numerous range of programming development tools for the Microchip PIC range of microcontrollers. Code can be downloaded easily to the unit by a direct connection to a computers RS232 serial port. Teach your robot to perform many functions and provide instant feedback with the LED's and LCD included on the robot. This robot is an ideal learning tool and base for more complex robotic projects and experiments.

Also included on the board is provision for a DS1307 Real Time Clock, EEPROM's, and low voltage circuit cut-out. The robot is completely mobile with an on-board large rechargeable battery included for long life. The robot is based on a solid anodized aluminium base, designed for strength and light weight. This reduces power drain on the battery and ensures the robot can withstand tough knocks combined with collisions.

Additional functions can be easily added, with the port connections and analog input connections, brought out to standardized polarized connectors. Add a voice, distance measuring, infrared sensing to your robot, the possibilities are endless.

Code examples are provided in assembly language and PICBasic language, for LCD operation, robot movement, analog inputs and much more.

Our Robot 877 is an ideal learning tool for robotics combined with microcontroller programming. The robot is ideal to use as a teaching tool in schools, colleges and universities, together with providing endless hours of fun in the home.

Please note: The Battery Charger is not included, this robot requires a standard sealed battery charger for the 6V Battery On-Board

Features • Includes Microchip PIC16F877 Microcontroller with 8kb internal Flash Program Memory • Solid Anodized Aluminium Base for Strength and Light Weight • 2 DC Motors Installed, for turning and forward/reverse motion • LCD Installed (2x16 Characters) • On-Board Programming using RS232 with MAX232 Installed • 4 Channel 10-Bit A/D Converter • Micro-switches for collision detection • Optical Sensors for Line Tracking • Power LED, Direction LED's and Reset Button • On-Board Battery for Complete Freedom of Operation • Real Time Clock (DS1307 Optional) • EEPROM (24LCXXX Option) • Buzzer • Code Examples Provided • Great as a learning tool for robotics and microcontrollers

WIRELESS PC INTERFACE GAME PLAYED BY TWO PERSONS HAVING TWO

PC NEAR 100 METERS:

Micro controller used with RFID to wireless interface of two PC to communicate with 2 persons playing

same game in defferent PC.

YOUR OWN MP3 PLAYER:

DSPIC 30f2010 Micro controller used to make your own MP3 player.

WIRELESS MULTIMETER MEASURED DATA ENTERS TO FAR DISTANCE PC:

Micro controller used with RFID to make wireless multimeter to measure continuosly for remote placed

data acquisition system.

SOLAR PANEL DIRECTION CONTROL BY RFID:

Micro controller used with RFID to control solar panel direction and automatic control according to

sunlight.

Make your own RFID:

433 Mhz RFID is Developed .Work for 100 meter range .

MAKE YOUR OWN BLUETOOTH:

Micro controller used with 2.4 giga Hz act as your own bluetooth.all protocol management is in side

firmware.

RE-FEEDABLE ITEM MENU DISPLAY IN HOTEL USING MICRO CONTROL:

Micro controller used with led display system and keypad. you can enter data whenever you want to

change,this is use ful for hotel item display unit.

FAN SPEED CONTROL USING PWM:

Micro controller used to generate PWM waves.and fan speed is controlled .

MODEM WHICH INTERCONNECTS ALL PC AND OTHER EQUIPMENTS

THROUGH ELECTRICAL LINE:

Micro controller used with step up and step down RF we can interconnect PC and all other equipment

through electrical line.

ELECTRONIC VOTING SYSTEM USING FINGER PRINT:

Micro controller used to develop electronic voting system which reads finger print.

CAN ADAPTOR DESIGN AND SOFTWARE FOR NODE CHECKING:

Micro controller used to develop CAN adaptor used while developing automotive product. CAN nodes

are checked with interface to PC.

WIRELESS LAN USING RFID:

Micro controller used with RFID to develop wireless LAN.

AUTOMOTIVE MULTIPLE NODE CONTROL SYSTEM FOR VEHICLE USING CAN

PROTOCOL:

This is automotive project to control all Nodes of car automatically.

RFID BASED SECURITY FLYING ROBOT SYSTEM:

Micro controller used with RFID to control flying robot which used for security purpose in a big ground.

Wind mill Project with high technology:

Automated solar project:

Automated garden lamp: