7/29/2019 Holds

http://slidepdf.com/reader/full/holds 1/5

R12: Payables Holds Explained – Why They are Applied and How to Remove

 Posted by: shivmohan purohit on Nov 1, 2012 | No Comments

Invoice Validation checks the matching, tax, period status, exchange rate, anddistribution information for invoices you enter. If an invoice has a hold, you can release

the hold by correcting the exception that caused Invoice Validation to apply the hold by

updating the invoice or the purchase order, or changing the invoice tolerances. Thenresubmit Invoice Validation to release the hold.

In the Invoice Holds tab, you can manually release certain invoice holds, even if you

have not resolved the matching error condition.Here are some of the regular holds and explanation

Account Holds

Payables uses holds with this type to identify invoices with invalid or incorrect accounts.

An invalid account prevents payment of an invoice and prevents Payables from creatingaccounting entries for an invoice or payment.

• Dist Acct Invalid: Invoice distribution distributed to invalid account. To release

the holds you must correct account and resubmit invoice validation.

•

ERV Acct Invalid: Payables created invalid Exchange Rate Variance account for invoice distribution. Used only if you enable Automatic Offsets. To release the

holds you must correct account and resubmit invoice validation.

Invoice Holds

Payables applies holds with this type to invoices. You can manually apply as many of 

these holds to an invoice as you require when you enter or adjust the invoice.

• Amount: Invoice amount is more than the invoice amount limit you specify for a

supplier site. There are different ways to remove this hold:

o Adjust invoice amount and resubmit invoice validation.

o Change invoice amount limit option for supplier site and resubmit invoice

validation.

o

Manually release in the invoice holds tab.• Invalid PO: You apply this hold when a supplier does not provide a valid

 purchase order number for matching. Manually release it in the Invoice Holds tab.

(Note: you can submit the Invalid PO Supplier Notice to request a valid PO from

the supplier).

• Natural Account Tax: You assigned a tax code to an expense or asset account in

the Tax Options window, and you enabled the Enforce Tax From Account

Payables option. The tax code on the invoice does not match the tax codeassigned to the account. There are different ways to remove this hold:

o Change the tax code on the invoice to match the tax code assigned to the

account.

o

Disable the Enforce Tax From Account in E-Business Tax Defaults andControls: Configuration Owner Tax Options tab.

o In the Tax Options window in General Ledger, change the tax code

association.

o Manually release the hold in the invoice holds tab.

• Supplier:

You enabled the hold unvalidated invoices option for a supplier site in the

Suppliers Sites window. You can manually release in the Invoice Holds tab. To

7/29/2019 Holds

http://slidepdf.com/reader/full/holds 2/5

 prevent future Supplier holds, disable

the hold unvalidated invoices supplier site option.

• Withholding Tax:

Payables cannot perform automatic withholding of tax. Correct error that caused

automatic withholding of tax to fail. For example, you may need to set up a period

in the withholding tax special calendar.Matching Holds

Payables applies holds with this type to an invoice if the invoice violates predefined

matching criteria.

• AMT ORD:

Amount Billed is greater than Amount Ordered * (1 + % Ordered tolerance).

There are different ways to remove this hold:

o Correct PO or invoice and resubmit Invoice Validation.

o Adjust tolerance and resubmit Invoice Validation.

o Manually release in the Holds tab.

• AMT REC:

Amount Billed is greater than Amount Received * (1 + % Received tolerance).There are different ways to remove this hold:

o Correct PO or invoice and resubmit Invoice Validation.

o Adjust tolerance and resubmit Invoice Validation.

o Manually release in the Holds tab.

• MAX AMT ORD:

Amount Billed is greater than the sum of Amount Ordered and Maximum

Amount Ordered

Tolerance Amount. There are different ways to remove this hold:o Correct PO or invoice and resubmit Invoice Validation.

o Adjust tolerance and resubmit Invoice Validation.

o Manually release in the Holds tab.• MAX AMT REC:

Amount Billed is greater than the sum of Amount Received and Maximum

Amount ReceivedTolerance Amount. There are different ways to remove this hold:

o Correct PO or invoice and resubmit Invoice Validation.

o Adjust tolerance and resubmit Invoice Validation.

o Manually release in the Holds tab.

• MILESTONE:

Quantity or Amount Billed is not equal to the total Quantity or Amount Ordered.This is a System hold – Correct PO or invoice and resubmit Invoice Validation or 

release the hold manually.• Can’t Close PO:

Online receipt accrual enabled in Purchasing and Purchase order quantity

delivered is not equal to the quantity received. Resolve purchase order delivery

information in Purchasing and resubmitInvoice Validation or release the hold manually.

• Can’t Try Final Close:

Invoice (final matched to purchase order) placed on hold during Invoice

7/29/2019 Holds

http://slidepdf.com/reader/full/holds 3/5

Validation. Release hold that caused invoice to be placed on hold and resubmit

Invoice Validation.

• Final Matching:

Invoice is matched to a purchase order that was final matched by another invoice.

Reverse the distribution and resubmit Invoice Validation to remove the Final

Matching hold.• Matching Required:

You have enabled the Hold Unmatched Invoices option in the Supplier Sites

window, and the invoice is not matched to purchase order or receipt. Matchinvoice to purchase order or 

receipt and resubmit Invoice Validation or release the hold manually.

• Max Qty Ord:

Quantity billed more than the sum of (quantity ordered plus the toleranceamount). There are different ways to remove this hold:

o Correct PO or invoice and resubmit Invoice Validation.

o Adjust tolerance and resubmit Invoice Validation.

o

Manually release in the Invoice Holds tab.• Max Qty Rec:

Quantity billed is more than the sum of (quantity received plus the toleranceamount). There are different ways to remove this hold:

o Correct invoice or receipt and resubmit Invoice Validation.

o Adjust tolerance and resubmit Invoice Validation.

o Manually release in the Invoice Holds tab.

• Max Rate Amount:

Exchange rate variance exceeds amount tolerance limit. There are different waysto remove this hold:

o Correct PO or invoice and resubmit Invoice Validation.

o Adjust tolerance and resubmit Invoice Validation.o Manually release in the Invoice Holds tab.

• Max Ship Amount:

Variance between invoice and shipment amount exceeds amount tolerance limit.There are different ways to remove this hold:

o Correct PO or invoice and resubmit Invoice Validation.

o Adjust tolerance and resubmit Invoice Validation.

o Manually release in the Invoice Holds tab.

• Max Total Amount:

Sum of invoice and exchange rate variances exceeds amount tolerance limit.There are different ways to remove this hold:

o Correct PO or invoice and resubmit Invoice Validation.o Adjust tolerance and resubmit Invoice Validation.

o Manually release in the Invoice Holds tab.

• Price:

Weighted average price of all distributions on the matched invoice and all pricecorrections related to the invoice is more than [purchase order unit price (1 plus %

tolerance)]. There are different ways to remove this hold:

o Correct PO, invoice, or price corrections and resubmit Invoice Validation.

7/29/2019 Holds

http://slidepdf.com/reader/full/holds 4/5

o Adjust tolerance and resubmit Invoice Validation.

o Manually release in the Invoice Holds tab.

• Qty Ord:

Quantity billed is more than [quantity ordered (1 plus % tolerance)]. There are

different ways to remove this hold:

o Correct PO or invoice and resubmit Invoice Validation.o Adjust tolerance and resubmit Invoice Validation.

o Manually release in the Invoice Holds tab.

• Qty Rec:

Quantity billed is more than [quantity received (1 plus % tolerance)]. There are

different ways to remove this hold:

o Enter receipt in Purchasing and resubmit Invoice Validation.

o Adjust tolerance and resubmit Invoice Validation.

o Manually release in the Invoice Holds tab.

• Quality:

Quantity billed is more than quantity accepted. Enter acceptance in Purchasing

and resubmit Invoice Validation or release the hold manually.• Rec Exception:

Purchase order receipt indicates exception. Please note this hold is not set at

invoice validation time. It’s created manually in Purchasing. You can release it

manually in the Invoice Holds tab.

• Tax Difference:

Invoice tax code value is not equal to the purchase order tax code. Invoice tax

code value = purchase order tax code value, but taxable flag set to No for POshipments. Correct PO or invoice and resubmit Invoice Validation or release the

hold manually.

Variance Holds

Payables applies the Dist Variance hold to an invoice if the total of the invoicedistributions does not equal the invoice amount. Payables applies the Tax Variance and

Tax Amount Range holds by verifying that the invoice’s distribution tax amount matches

the calculated tax for the Tax Code within the amount tolerance or percentage toleranceor both that you define. If the variance exceeds a percentage tolerance, Payables applies

the Tax Variance hold. If the variance exceeds an amount tolerance, Payables applies the

Tax Amount Range hold.

• Dist Variance:

Invoice line amount is not equal to the related sum of invoice distribution

amounts. Adjust invoice distributions or invoice amount and resubmit Invoice

Validation. If adjustment is not possible reverse distribution line and re-enter a

new one or discard line.• Line Variance:

Sum of invoice line amounts is not equal to the invoice header amount. Add aninvoice line, adjust invoice lines or invoice amount and resubmit Invoice

Validation. If adjustment is not possible discard line and re-enter a new one.

• Prepaid Amount:

The prepaid amount including tax exceeds the invoice amount. Unapply the

 prepayment and apply a lower amount.

7/29/2019 Holds

http://slidepdf.com/reader/full/holds 5/5

• Tax Amount Range:

Tax amount is less than [(tax rate taxable dist line total) - tolerance

amount] or Tax amount is more than [(tax rate taxable dist line total) + toleranceamount]. There are different ways to remove this hold:

o Adjust tax rate for tax code and resubmit Invoice Validation.

o

Change tax code or tax group on invoice distributions and resubmitInvoice Validation.

o Adjust tax tolerance and resubmit Invoice Validation.

o Manually release in the Invoice Holds tab.

• Tax Variance:

Tax amount is less than [(tax rate taxable dist line total) (1 - % tolerance)] or Tax

amount is more than [(tax rate taxable dist line total) (1 + % tolerance)]. There aredifferent ways to remove this hold:

o Adjust tax rate for tax code and resubmit Invoice Validation.

o Change tax code values on invoice distributions and resubmit Invoice

Validation.

o Adjust tax tolerance and resubmit Invoice Validation.o Manually release in the Invoice Holds tab.

Miscellaneous Holds

Miscellaneous predefined Hold that Payables uses to apply holds to invoices.

• No Rate:

 No exchange rate for foreign currency invoice. Enter exchange rate and resubmit

Invoice Validation or submit AutoRate and resubmit Invoice Validation.

• All Payments:

You enabled the Hold All Payments option for the invoice’s supplier site. Disable

the Hold All Payments option in the Supplier Sites window and Payables allows

you to select the supplier site’s invoices for payment if they are validated (and

approved, if the invoice requires invoice approval) or create a manual payment for any of the held invoices.

• Supplier:

Hold all unvalidated invoices for a supplier. Remove the hold in the InvoiceHolds tab, or use the Actions button. To disable completely, disable the Hold

Unvalidated Invoices option at the supplier site.