Holden Panel Protection Systems Brochure (2)

02

The latest product we have to offer our customers are protection bollards and guardrails. These are constructed with solid block high density polyethylene (HDPE) and are designed to absorb impact from moving vehicles and help to eliminate damage to equipment and per-sonnel. They are easy to install, cost-effective, low maintenance and are ideally suited to the food production and distribution industries.

Holden Installations Limited is a family run business that has been in operation since 1986. We service the food production and temperature controlled distribution industries.We work closely with our sister company Thermo Hygiene doors who specialize in manufacturing hygiene grade doors for the same sectors.

Holden Installations Limited prides itself on its commitment to quality and continous improvement. This compels us to offer the very best solutions to our customers and we are fully committed to developing our range of products to ensure our customers receive the innovation, quality, service and commitment that we offer.

We operate in four divisions:· Insulated Panels· Hygienic Food Safe Doors· PVC Sheeting· Bollards & Guardrails

P300

P100

P200

CEILINGS

HDI - PROTECTION

BOLLARDS

GUARDRAILS04

06

08

09

10

12

13

Index

Our Customers:

03

CHARACTERISTICS:

• Hygienic-sanitary cladding. • Foamed PVC panels coextruded finish. • Thick panel (8 mm). • Non-porous surface. • Sanitary registration. • HACCP sanitary certificate. • Unbeatable fire behaviour in PVC panels according to Euroclase B s2 d0 (in +Plus option). • CE Marking (in the +Plus option). • Highly resistant to impact. • Tongue and groove connection system with recessed screw. • Resistant to aggressive ambients.• Full set of profiles for finishes without any visible screws. • Standard length of 2.5, 3, 3.5 and 4 meters, can also be made to measure. • Product protected by patent.• 100% recyclable.

P300

04

PROPERTIES UNIT VALUE

Conductivity coefficient W/mºC 0.07

Linear expansion coefficient K-1 54 . 10-6

Use temperature rangeTmin.

ºC40

Tmax -20

Elasticity Module N / mm2 1200

Length of breakage % 40

Mass density g/cm3 0.55

Coextrusion layer density g/cm3 1.4

Shore Hardness D - 74

Reaction to fire classification (+PLUS) - Bs2d0

Other certificate (+PLUS) - CE Marking

DETAIL

CERTIFICATIONS AND APPROVALS :

• HACCP sanitary certificate • Fire rating B s2 d0 (Option +PLUS) • ISO 9001 Certified • AENOR, IQ-NET, CE Certificates

MEASUREMENTS:

1. Width 1/3 m. ± 2 mm.2. Variable length ± 10mm.3. Thickness 6,2 ± 0,8mm. central areas

RECOMMENDED PROFILES:

ADVANTAGES:• Highly resistant to fire. • Ideal for food processing facilities. • Easy installation, no glue required. • Protects walls from oxidisation. • Protects walls from knocks. • Easy to clean. • Non-porous. • Installation with no profile joints and

recessed screws. • Strength and rigidity due to its 8mm

thickness. • The tongue and groove system means no

joints. • Material and manufacturing method

patented. • Absorbs knocks and does not crack. • Protects from oxidation. • Saves on maintenance cost.

USES:

• Hygienic cladding and wall lining. • Rehabilitation of cold storage rooms. • Sanitation of food production areas. • All types of agrifood cladding. • Ideal for all wall types. • Sanitary approvals.

05

A

B

C

Ref. 20

Ref. 2 Ref. 4 Ref. 6 Ref. 11

Ref. 15

CHARACTERISTICS:

• Solid panel manufactured in highly resistant PVC. • Minimum thickness (maximum of 5.5mm). • Ribbed panel for extra rigidity. • Very easy to manage. • Ideal for uneven surfaces. • The corrugated design means the piece will not warp over time. • Even finish. • Corrugated surface. • Tongue and groove connection system with recessed screw. • Unbeatable fire behaviour in PVC panels according to Euroclase B s2 d0 (in +Plus option).• CE Marking (in the +Plus option).

PROPERTIES Unit Value

(d) Density g/cm3 1.45


Linear expansion coefficient K-1 5·10-6



ºC40

Tmax -20

Elasticity Module Kg/cm2 25000

Shore Hardness D º Shore 78-88

Stabilization - Free of Pb



P100

06

CERTIFICATIONS AND APPROVALS:

• HACCP sanitary certificate• Fire rating B s2 d0 (Option +PLUS) • ISO 9001 Certified• AENOR, IQ-NET, CE Certificates

ADVANTAGES:

• Fire resistant. • Aesthetic advantages thanks to its

surface corrugated that helps conceal joints.

• Highly resistant to knocks. • Finish similar to refrigerator panels. • Best VALUE FOR MONEY. • No need to paint or tile wall. • No need for masonry work or repairs.

USES:

• Hygienic cladding.• Wall lining.• Rehabilitation of cold storage rooms.• Where minimum thickness is required.• Sanitation of food production areas.• All types of agrifood cladding.• Ideal for all types of walls. • Suitable for sanitary approval.

TONGUE AND GROOVE CONNECTION SYSTEM WITH RECESSED SCREW

APPEARANCE OF CONNECTED PANELS

MEASUREMENTS:

1. Width 1/3 m. ± 2 mm.2. Variable length ± 10 mm.3. Thickness 2 mm central areas.

07

CA

B

Ref. 1

Ref. 3

Ref. 8

CHARACTERISTICS :

• Highly resistant to impact. • Hygienic joints. • Easy installation with recessed screws. • Auxiliary PVC profiles. • Sleek finish.• 100% recyclable.


• ISO 9001 Certified • AENOR, IQ-NET, CE Certificates

WHAT IS IT? It’s a plain PVC sheet, 1.7mm. thick and 333mm wide (3 units 1m.) with a standard length of 2.5m, 3m, 4m. Consult for other measurements

USES:

• Protects panels from knocks. • Protects from oxidation. • Sanitary cladding. • Wall lining for building work. • Rehabilitation of chambers. • All types of coating. • Easy to clean.

P200PVC COVERINGS

MEASUREMENTS:

1. Width 1/3 m. ± 2 mm.2. Variable length ± 10 mm.3. Thickness 1.7 mm central areas.

DETAIL

CONNECTED PANELS

08

A

B

C C

CHARACTERISTICS :

• PVC coating for ceilings has a thickness of 10mm. • Minimum thickness. • Easy to clean. • For food use. • Does not rust. • Maintenance free. • Protects ceilings from moisture and steam. • Resistant to fats and acids. • Easy installation with recessed screws.• Unbeatable fire behaviour in PVC panels according to Euroclase B s2 d0 (in +Plus option).• CE Marking (in the +Plus option).


• HACCP sanitary certificate • Fire rating B s2 d0 (Option +PLUS) • ISO 9001 Certified • AENOR, IQ-NET, CE Certificates

USES:

• Protects panels from knocks. • Protects from oxidation. • Sanitary cladding. • Wall lining for building work. • Rehabilitation of chambers. • All types of coating. • Easy to clean.

MEASUREMENTS:

1. Width 1/3 m. ± 2 mm.2. Variable length ± 10 mm.3. Thickness 10 mm central areas.

DETAIL

09

A

B

C C

PROPERTIES Unit Value

(d) Density g/cm3 1.4


Linear expansion coefficient K-1 5·10-6



ºC40

Tmax -20

Elasticity Module Kg/cm2 25000

Stabilization - Free of Pb



CEILINGS

CHARACTERISTICS:

• Zero maintenance. • Can be levelled. • High density polymer. • Without edges or corners. • Resistant to corrosive environments. • Does not rust. • High impact resistance. • High visibility due to its colour. • Impact absorption thanks to its flexibility. • Stops fungi or bacteria growth.

HygienicShock ProofProtection

Technical data UNIIT HMW-PE

Density ISO 1183 g/cm3 0.95

Yield stress DIN EN ISO 527 N/mm2 28

Elongation yield DIN EN ISO 527 % +8


Tensile-E-modulus DIN EN ISO 527 MPa 850

Impact strength DIN EN ISO 179 KJ/m2 NO BREAK

Notched impact strength DIN EN ISO 179 KJ/m2 50

Ball identification hardness DIN EN ISO 2039-1 N/mm2 45

Shore hardness D ISO 868 shore 66

Linear expansion coefficient DIN 53752 K-1 1’8 . 10-4

Thermal conductivity DIN 52612 W/m-K 0.38

Dielectric strength VDE 0303-21 KV/mm 44

Surface resístanse DIN IEC 167 Ohm 1014

Temperature range ºC -100 until +80

Chemical resístanse - High resistance to acid, alkali and solvent.

Physiologically acceptable - Yes

Welding - Yes

Glassfibre reinforcing - -

Lacquering, printing - -

Hot forming - Possible

ADVANTAGES:

• One heavy duty fixing per foot.• Easily interchangeable if damaged.• Reduces maintenance costs. • Easy to assemble. • No painting required as it pre-coloured.• Easy to clean.

10

Technical data UNIIT HMW-PE

Density ISO 1183 g/cm3 0.95

Yield stress DIN EN ISO 527 N/mm2 28

Elongation yield DIN EN ISO 527 % +8


Tensile-E-modulus DIN EN ISO 527 MPa 850

Impact strength DIN EN ISO 179 KJ/m2 NO BREAK

Notched impact strength DIN EN ISO 179 KJ/m2 50

Ball identification hardness DIN EN ISO 2039-1 N/mm2 45

Shore hardness D ISO 868 shore 66

Linear expansion coefficient DIN 53752 K-1 1’8 . 10-4

Thermal conductivity DIN 52612 W/m-K 0.38

Dielectric strength VDE 0303-21 KV/mm 44

Surface resístanse DIN IEC 167 Ohm 1014

Temperature range ºC -100 until +80

Chemical resístanse - High resistance to acid, alkali and solvent.

Physiologically acceptable - Yes

Welding - Yes

Glassfibre reinforcing - -

Lacquering, printing - -

Hot forming - Possible

SOLID BLOCK

Made of solid pieces to give maximum strength. In addition there is no paint as the pigment is in the raw material.

SPECIAL ROD

Special alloy to ensure impact flexibility and prevent breakage.

HIGH DENSITY POLYETHYLENE

Highly resistant material performing better than stainless steel and meets the standards for materials in contact with food.

FLOOR PROTECTION

Special coating that insulates and protects the floor from impact received from the rod and avoids breaking it.

NEOPRENE

Special Neoprene to sealing protection joint and prevent any leakage.

REPLACEABLE ANCHORAGE SYSTEM

Ensures maximum fastening and resistance protection and if necessary allows the rod to be replaced.

11

12

USES:

• The best choice to protect the inside of doors and corners.

• It is also an ideal solution for small areas needing protection.

USES:

For the protection and safety of personnel, given that its design allows accidents to be avoided.

BOLLARD

PERSONNEL-GUARDRAIL

DIMENSIONS (mm) DRILL (mm)

Diameter Height ∅ Rod ∅ Depth

70 262 20 48 150

100-120 430 30 68 170

100-120 530 30 68 170

120 800 30 68 170

DIMENSIONS DRILL (mm)

Diameter (mm) Length (mm) Anchor points ∅ Rod Height ∅ Depth

70 - 120

500 - 1000 2

20 500 800 48 1501500 - 2000 3

2500 4

70 - 120

500 - 1000 2

20 1000 1100 48 1501500 - 2000 3

2500 4

PROTECTION

13

USES:

The best solution to protect any wall or object. Thanks to its anchorage it has great impact resistance.

USES:

The most robust protection, able to withstand an impact of more than 9 tons. Ideal for areas where traffic is very hectic in critical areas.

GUARDRAIL

DOUBLE GUARDRAIL



70

500 - 1000 2

16 125 36 150 1500 - 2000 3

2500 4

100

500 - 1000 2

20 / 30 150 48 / 68 1701500 - 2000 3

2500 4

120

500 - 1000 2

20 / 30 175/275 48 / 68 1701500 - 2000 3

2500 4



70 / 70

500 - 1000 2

16 230 36 120 1500 - 2000 3

2500 4

100 / 100

500 - 1000 2

20 300 48 1501500 - 2000 3

2500 4

120 / 120

500 - 1000 2

20 340 48 1501500 - 2000 3

2500 4

Low MaintenanceCost EffectiveImpact AbsorptionEasy to Install

dise

ño_w

ww

.314

16k.

Unit 7Little Island Industrial EstateLittle IslandCorkT45 FH33T. +353 21 435 43 40F. +353 21 435 43 [email protected]

Documents

Holden Panel Protection Systems Brochure (2)