A P P L I C A T I O N & A T T A C H M E N T

Crawler Type Aerial Platform

HX Crawler type aerial platform

Notes : Photos include optional equipment. Some of the photos in this brochuer show an unmanned machine with attachments in an operating position. These were taken for demonstration purposes only and the actions shown are not recommended under normal operating conditions.

13.9m Platform Height The Articulating Jib Mechanism 320 mm Tail swingThis brings high productivity in confined quarters.

Hydraulic Pilot ControlPleasant Finger-Touch Handling. Simple Maintenance.

3-Stage Telescoping Boom for Easy transportOverall machine transport length is 7.9 m, with the retracted boom.

Travel Speed : 1.5 km/h Emissions Control Engine Low Noise Design Overload warning systemIf the load exceeds 120% of the rated load, the overload warning system works to stop normal movements, and warns of overload through the lamp and buzzer.

Swing reduction gear protection deviceEven if the basket strikes against its swing device, this protection device protects the swing device by releasing external forces through a friction plate.

Operating panel designed for safety(Upper control panel)

_004OC_KA-EN117EU_HX140B.indd 1_004OC_KA-EN117EU_HX140B.indd 1 29/03/2010 17:00:4629/03/2010 17:00:46

Hitachi Construction Machinery www.hcme.com

Printed in the Netherlands

These specifi cations are subject to change without notice.Illustrations and photos show the standard models, and may or may not include optional equipment, accessories, and all standard equipment with some differences in color and features.Before use, read and understand the Operator’s Manual for proper operation.

KA−EN117EU

WORKING RANGES

SPECIFICATIONS

Unit: mm

Model HX140B-2

Maximum work platform height mm 13 900

Maximum horizontal reach mm 12 600

Maximum allowable load kg 250

Work platform turning angle degree 90 (either direction)

Machine weight kg 8 170

Shoe width mm 400 (rubber shoes)

SpeedBoom raise/lower s raise 50, lower 50

Boom extend/retract s extend : 38, retract : 38

Swing min-1(rpm) 0.5 (0.5)

Travel km/h high : 1.5, low : 0.9

Work platform turn degree/s 90 / 10

EngineModel Kubota D1105-K2A

Type Water-cooled, 3-cylinder swirl combustion chamber type diesel engine

Rated fl ywheel horsepower kW/min-1(PS/rpm) 13.6 / 2 200 (12.5 / 2 200)

Service refill capacitiesFuel tank L 66

Hydraulic oil tank L 67

: Travel not Possible [Boom angle 60° area]

: Travel not Possible [Boom length area]

3 140

R 1 470

1 640

2 300

1 900

400

12 590

7 900

13 8

50

2 87

0

1 46

0

2 43

0

1 11

077

0

1 80

0

280

70

750

_004OC_KA-EN117EU_HX140B.indd 2_004OC_KA-EN117EU_HX140B.indd 2 29/03/2010 17:00:5429/03/2010 17:00:54