A Hilco Global CompanyVested in Your Success

www.hilcoind.com

Featuring Presses up to 1,000 Ton Capacity,Servo Feed Lines, Inspection & Tool Room Equipment

Complete PrecisionStamping Facility

Tuesday, February 2nd • 10:00 am Local TimeOrion, Michigan

WEBCAST/ONSITE AUCTIONHilcoTM Industrial

Hilco® Industrial

Powered by

Complete Facility withPress Lines, Cranes,Scrap Conveyor Line,

& Real Estate AVAILABLE IMMEDIATELY

To schedule an auction, please call Hilco Industrial  at 1-877-37-HILCO (44526)2

HilcoTM Industrial

2004

AUCTION DATE

TUESDAY, FEBRUARY 2ND

BEGINNING AT 10AM LOCAL TIME

PREVIEw DATE

MONDAY, FEBRUARY 1ST

8AM TO 4PM LOCAL TIMEFor eArlIer InspeCtIon, pleAse ContACt ken plAnet At 248-238-7988 or emAIl kplAnet@HIlCoInd.Com

AUCTION & PREVIEw LOCATION269 KAY INDUSTRIAL DR ORION, MI 48359

FURTHER INFORMATION• A 16% BUYER'S PREMIUM WILL BE CHARGED ON ALL ASSETS WHEN PAYMENT

IS MADE BY MEANS OF CASH, CASHIER’S CHECK, COMPANY CHECK (WITH BANKLETTER OF GUARANTEE) OR WIRE TRANSFER WITHIN 48 HOURS OF SALE CLOSE.AN 18% BUYER'S PREMIUM WILL BE CHARGED ON ALL ASSETS WHEN PAYMENTIS MADE BY CREDIT CARD (ACCEPTED FOR INVOICES OF $2000 OR LESS), ORWHEN PAYMENT IS RECEIVED AFTER 48 HOURS OF SALE CLOSE. AN 18%BUYER'S PREMIUM WILL BE CHARGED FOR ALL BIDSPOTTER PURCHASES WITHNO DISCOUNT FOR PROMPT PAYMENT. AUCTION WILL BE CONDUCTED IN ENG-LISH, ACCEPTING U.S. CURRENCY ONLY.

• REMOVAL DEADLINES; SMALL/HAND CARRY ITEMS – FRIDAY, FEBRUARY 12TH; LARGEITEMS – FRIDAY, FEBRUARY 26TH. ADDITIONAL TIME EXTENSION MAY BE AVAILABLE FOR200 - 1,000 TON PRESSES UPON APPROVAL. HOURS OF REMOVAL BETWEEN 8AM TO4PM MONDAY THRU FRIDAY.

MACHINERY &  EQUIPMENT

KEN PLANET 248-238-7988 • KPLANET@HILCOGLOBAL.COMPAYMENT INFORMATION

LESIA JOSEPH 616-328-6892 • LJOSEPH@HILCOGLOBAL.COMHILCO ACCOUNTS RECEIVABLE AT AR-GR@HILCOGLOBAL.COMCUSTOMER SERVICE

+1 877-37-HILCO • +1 616-732-1800 • INFO@HILCOIND.COM

Information contained herein deemed to be accurate at time of printing and subject to change. For updated information, please visit our website at www.hilcoind.com for any changes to

date, sale process, terms and conditions and list of available assets.

WEBCAST/ONSITE AUCTION

Powered by

1,000 TON BLOW PRESS#SC2-1000-144-72

STRAIGHT SIDE DOUBLECRANK PRESS,

S/N SDG-1000-578-04 (2004),Stroke 16”, Strokes per Minute20-45 Variable, Bed 72” x 144",

Shut Height 32” To Bolster,Motorized Slide Adjustment12”, T-Slotted Bolster Plate

8" Thick, 60” Windows,Console Control,

Floor Standing, Air Clutch,Lightning Time Savers

#LTS990 Die Change Rails

Turnkey with Real Estate andEquipment AvailableSee Page 7 for Details.

Contact Steve Wolf 616-466-7079 • swolf@hilcoglobal.com

For more information, please visit us on the web at hilcoind.com/SuDanIndustrial 3

STRAIGHT SIDE PRESSES – ALL FLOOR STANDING

See Videos of Presses Under Power on our Website

hilcoind.com/SuDanIndustrial

STRAIGHT SIDE PRESSES1 – 400 TON BROWN & BOGGS #SS2-400-120-48 STRAIGHT

SIDE DOUBLE CRANK PRESS, S/N 95104 (1995), Stroke10”, SPM 35-70 Variable, Bed 48” x 120”, Shut Height 23”,Motorized Slide Adjustment 12” Bolster, Window in Uprights36” Wide, Air Clutch and Brake, Nematron Controller,Gemco Tonnage Monitor & Series 1992 Press SetController, Light Curtains, Lightning Time Savers #LTS990Die Change Rails

1 – 400 TON BLOW PRESS #SC2-400-108-48 STRAIGHT SIDEDOUBLE CRANK PRESS, S/N FDG-400-281-90 (1990),Bed 48” x 108", Stroke 10”, SPM 20-40 Variable, Shut Height28”, Motorized Slide Adjustment, Window in Uprights 32”Wide, 10", Air Clutch and Brake, Allen-Bradley Controller,Vibratory Part Feeder, Light Curtains, Palm Control

1 – 300 TON BLOW PRESS #SC2-300-96-48 STRAIGHT SIDEDOUBLE CRANK PRESS, S/N SDG-300-298-92 (1992),with 96"LR x 48"FB Bed Area, 80-SPM, 8" Stroke, 10" SlideAdjustment, Window in Uprights 32” Wide, 44" Shut Height,Air Clutch and Brake, Gemco Tonnage Monitor, SafetyGuards, Light Curtains, Palm Button Controls

1 – 200 TON BROWN & BOGGS #SC2-200-96-42 STRAIGHTSIDE DOUBLE CRANK PRESS, S/N 78229, Stroke 8”, SPM40-80 Variable, Bed 42” x 96", Shut Height 21, MotorizedSlide Adjustment 10", T-slotted Bolster Plate 6” Thick,Window in Uprights 22” Wide, Air Clutch and Brake, GemcoTonnage Monitor & Series 1992 Press Set Controller, LightCurtains, Lightning Time Savers #LTS990 Die Change

1 – 200 TON BROWN & BOGGS # SS2-200-72-48ESTRAIGHT SIDE DOUBLE CRANK PRESS, S/N 96103(1996), Stroke 8”, SPM 0-125 Variable, Bed 48” x 72”, ShutHeight 24”, Motorized Slide Adjustment 10”, T-slotted BolsterPlate 6" Thick, Window in Uprights 31” Wide, Air Clutch andBrake, Numatron Process Controller, Gemco TonnageMonitor, Press Watch Production Monitor, Light Curtains,Lightning Time Savers #LTS990 Die Change

1 – 200 TON BLOW PRESS #SC2-200-84-40 STRAIGHT SIDEDOUBLE CRANK PRESS, S/N SDG-200-301-92 (1992),Stroke 8”, SPM 100, Bed 40” x 84", Shut Height 24” toBolster, Motorized Slide Adjustment 8", Air Clutch and Brake,PAL PLC Controller, Light Curtains, Console Control,Lightning Time Savers #LTS990 Die Change

3 – 200 TON MINSTER #MS2-200-84-48 STRAIGHT SIDEDOUBLE CRANK PRESSES, S/N’s 10779, 10780 & 10803with 84" x 48" Bed Area, 20-SPM, 16" Stroke, 12" SlideAdjustment, 6" Bolster, Air Clutch and Brake, Wintriss Clutchand Brake Control, Gemco Tonnage Monitor, Light Curtains,Air Cushions

1 – 200 TON MINSTER #E2-200-72-60 STRAIGHT SIDE 4-POINT PRESS, S/N 15044, Stroke 6", Strokes per Minute30-80 Variable, Bed & Slide 60" x 72", Shut Height 55" toBed, Motorized Adjustment 12", Windows 64" Wide (OffsiteMichigan Location)

GAP FRAME PRESSES • OBI PRESSES • SERVO COIL FEED LINES

To schedule an auction, please call Hilco Industrial  at 1-877-37-HILCO (44526)4

2003

GAP FRAME PRESSES1 – 250 TON KOMATSU #OBW250-2 2-POINT GAP FRAME PRESS, S/N 10065 (1986), Stroke

9.84”, SPM 20 To 40 Variable, Bed 27” x 82”, Shut Height 21.65", Motorized Slide Adjustment4.72" Adjustment, 82" x 27" Bed Size, Gemco Tonnage Monitor, Light Curtains

1 – 200 TON KOMATSU #OBS200-2 200-TON SINGLE POINT GAP FRAME PRESS, S/N 10201(1985), Stroke 9.84”, SPM 25-50 Variable, Bolster Plate 36” x 60", Die Height 18.9”, MotorizedSlide Adjustment 4.72", Gemco Tonnage Monitor, Light Curtains

1 – 200 TON KOMATSU #OBW200-3 200-TON GAP FRAME PRESS, S/N 10036 (1996), Stroke9.84”, SPM 30-50 Variable, Bed 33.4” x 95.2" x 7.09” Thick, Die Height to Bolster 19.69",Motorized Slide Adjustment 4.72", Toledo PW Plus Production Monitor, Gemco TonnageMonitor & Series 1992 Press Set Controller, Light Curtains, Lightning Time Savers #LTS990Entry & Exit Die Support

1 – 200 TON AIDA #C1-20 TWO POINT GAP FRAME PRESS, S/N 10520-0702, Stroke 10",Strokes per Minute 25-45 Variable, Bed 33" x 109", Slide 25.5" x 72.8", Shut Height 20",Motorized Adjustment 4", Bolster Plate (Offsite Michigan Location)

OBI PRESSES1 – 75 TON FEDERAL OBI PRESS, S/N 75GA101, Stroke 4", Strokes per

Minute 47, Bed 24" x 36", Shut Height 15", Air Clutch, (Offsite MichiganLocation)

1 – 45-TON SOUTH BEND #45F-SW-AC OBI PRESS, S/N 74039, Stroke 3”,SPM 125, Bed 18” x 28", Shut Height 11-1/4", Adjustment 3", Air Clutch andBrake, Wintriss Brake Monitor, Light Curtain

1 – 27-TON SOUTH BEND #OBI-27W OBI PRESS, S/N 74171, Stroke 2-1/2”,Bed 16-1/2” x 32"LR, SPM 160, Flywheel Press, Shut Height 15-1/2", Slide Adjustment 2-1/2", Air Clutch and Brake, Wintriss Brake Monitor, Light Curtain

SERVO FEED COIL LINES1 – DALLAS 30,000 LB X 48” WIDE X .135” THICK SERVO

FEED LINE (2003), Reel #DPR-30000x48, S/N 21930, Width48”, ID 20” – 24” Hydraulic Expansion, OD Max 72”, Coil Car,Hold Down Arm, Looping Table #PTR-30000x48, Servo Feed/ Straightener #DRFSH-648, S/N 21930, 5-Roll Pull ThroughStraightener, Allen Bradley PanelView 600 Terminal

1 – COLT AUTOMATION 15,000 LB X 36” WIDE X .100” THICKSERVO FEED LINE, Reel #CHDRCA-1500, S/N 1201503,Coil Car, Straightener #CPS-36 Straightener S/N 1131078,Peeler/Threader, Servo Feed #CERF-40-36, S/N 11441057

1 – COLT AUTOMATION 15,000 LB X 30” WIDE X .100”THICK SERVO FEED LINE, Double End Reel #CHDRCK-1500-36, S/N 1201541, Straightener #CPS-36, S/N 3-160-1218, 7 Straightening Rolls, Thread Table, Dekinker, Peeler,Motorized Hold Down Arm, Pinch Rolls, Servo Feed #CERF-40-36, S/N 1141084, Lift Table

1 – AIR FEEDS INC./COIL HANDLING SYSTEMS 10,000 LB X30” WIDE X .250” THICK SERVO FEED LINE, Reel #R100,S/N 980626, Width 36”, ID 20”-24”, OD 48” Max, HydraulicExpansion, Variable Speed Drive, Powered Hold Down Arm,Peeler/Threader, Travelling Coil Car, Servo Feed #DRF6x30,S/N 980628 (1998), Capacity 30” x .250”, 7-Roll Pull-ThroughStraightener

1 – MINSTER 7,000 LB X 20” WIDE SERVO FEED LINE, Reel#MR6-20D Double End Reel, S/N 13-70117, ID 18”-22”, MaxOD 60”, Two (2) Powered Hold Down Arms, Swivel Head,Straightener #20-20-7, S/N 13-50106, Max Thickness .250”,Peeler Table & Blade, Servo Feed #MEF3-20, S/N 1850222,Control Console, Indramat Control

Partial Listing Only, Visit Our Websitehilcoind.com/SuDanIndustrial

SERVO FEED-STRAIGHTENER1 – DALLAS #DRFESH-430 SERVO FEED-STRAIGHTENER, S/N 21625 (2002), Capacity

30"W x .147” Thick, Dallas Tuffserv Programmable Controller, Pneumatic Pinch Feed Rolls,Cabinet Base

UNCOILERS1 – 20,000 LB. FEEDLEASE #PR-20M-36 REEL, S/N 4674, Width 36”, Max OD 60" Max,

Hydraulic Expansion, Variable Speed, Hold Down Arm1 – 15,000 LB X 30” WIDE DALLAS REEL WITH HOLD DOWN ARM, Reel #DPR-15000x30,

S/N 21627 (2002), Width 30”, ID 20”-24” Hydraulic Expansion, OD Max 72”, Hold Down Arm,Coil Car

1 – 1,200-LB. MOTORIZED COIL REEL1 – 2,500 LB AIR FEEDS INC. #R25X18 REEL, S/N 911226 (1991), Width 18”,

Motorized/Variable Speed, ID 16” – 20”, Max OD 50"

AIR FEED/STRAIGHTENERS2 – AIR FEEDS INC. #AF-5 .280" X 30"W CAPACITY AIR FEED/STRAIGHTENER,

S/N 821222 & 860104 (1982), 18" Stroke, 30-SPM, 5-Roll Pull-Through Straightener,Pneumatic Pinch Rolls, Cabinet Base

1 – AIR FEEDS INC. #AF-4 .140 X 24"W CAPACITY AIR FEED/STRAIGHTENER, S/N 840842(1984), 18" Stroke, 50-SPM, 5-Roll Pull-Through Straightener, Pneumatic Pinch Rolls,Cabinet Base

1 – AIR FEEDS INC. #AF-1 .090" X 18"W CAPACITY AIR FEEDER/ STRAIGHTENER, S/N 371032, 5-Roll Pull-Through Straightener, Pneumatic Pinch Rolls, Cabinet Base

COIL CRADLES1 – ROWE #12050J 12,000-LB. X 50"W CAPACITY COIL CRADLE, S/N 26260 (1995), 60" Max. OD1 – ROWE #8030J 8,000-LB. X 30"W CAPACITY COIL CRADLE, S/N 27899 (1996), 60" Max. OD1 – ROWE #4020J 4,000-LB. X 20"W CAPACITY COIL CRADLE, S/N 25433 (1984), 48" Max. OD1 – ROWE #3020J 3,000-LB. X 20"W CAPACITY COIL CRADLE, S/N 25709 (1984), 60" Max. OD

COORDINATE MEASURING MACHINE1 – BROWN & SHARPE #MISTRAL 7-7-5 COORDINATE MEASURING MACHINE,

S/N 1200-9299 (2000), Travels: 28" X-Axis, 28" Y-Axis, 20" Z-Axis, with Renishaw #PH10MProbe, PC-DMIS, Pendant Control, Computer, Printer

SERVO FEED-STRAIGHTENER • UNCOILERSAIR FEED/STRAIGHTENERS • COIL CRADLES • CMM

For more information, please visit us on the web at hilcoind.com/SuDanIndustrial 5

20022002

PC-DMIS

INSPECTION • WELDERS • TOOL ROOM EQUIPMENT

To schedule an auction, please call Hilco Industrial  at 1-877-37-HILCO (44526)6

TOOL ROOM EQUIPMENT1 – KECKLEY TYPE K 75 TON HYDRAULIC PRESS, S/N 90611,

Stroke 15”, Daylight to Bed Approx. 18”, Nominal Bed 15” x 24”,Between Posts 9” x 30”

1 – MASTEEL #MRD-5016 1600MM ARM X 350MM COLUMN RADIALARM DRILL, S/N 1538 (1999), 25-2,000 RPM, with Box Table

1 – CHEVALIER FALCON #FSG-1224AD 12" X 24" HYDRAULICSURFACE GRINDER, S/N F179902 (1995), with Electro MagneticChuck, Coolant System, Relay Controls, Hydraulic Unit

1 – CLAUSING #CSG-1228ASD 12" X 28" AUTOMATICHYDRAULIC SURFACE GRINDER, S/N 978632 (1998), withElectro Magnetic Chuck, Programmable Controls, Coolant System

1 – KENT #SGS816 8" X 16" HAND FEED SURFACE GRINDER, S/N 422010 (1994), with Permanent Magnetic Chuck

1 – HARIG #618 6" X 18" HAND FEED SURFACE GRINDER,S/N 6457-W (1986), with Permanent Magnetic Chuck

1 – EXCELLO 6" X 12” HAND FEED SURFACE GRINDER, S/N 618061 (1982), Electro-Magnetic Chuck

1 – BOYAR-SCHULTZ #HR618 6" X 18" HAND FEED SURFACEGRINDER, S/N B68R00283, with Permanent Magnetic Chuck

1 – BRIDGEPORT SERIES II 5-HP VERTICAL MILLING MACHINE,S/N 2813 (1978), Power Feed Table 11” x 58”, Spindle 50-400RPM, Power Quill Feed & Power Knee Travel

1 – BRIDGEPORT SERIES I, 2 HP VERTICAL MILLING MACHINE, S/N 246454, with Variable Speed Control, 2-Axis Digital Readout,Power Draw Bar

1 – POWERMATIC #1200 PRODUCTION DRILL PRESS, with 24" x 36"Production Table

1 – KBC #BAH-916 9" X 16" CAPACITY HORIZONTAL BAND SAW,S/N 93841 (2012)

1 – POWERMATIC #600 VERTICAL BAND SAW, S/N 699310 (1969),with 20" x 20" Table, Blade Welder/Grinder

1 – WILTON 6" BELT/12" DISC SANDER1 – TENNSMITH #HB97 HAND BRAKE, Capacity 8’ x 16, S/N 13845

INSPECTION1 – UNITED #STM-50KN 50-KN TENSILE TESTER, S/N 10135611 – GAGEMASTER #89/GMX 30" OPTICAL COMPARATOR,

S/N 3694688, with GMX Plus ControllerLARGE QUANTITY Pin Gauge Sets, Calipers, Micrometers, HeightGauges, Ametek Accu Force Cadet Force Gauge, 0-250 N, TorqueWrenches, Mitutoyo Block Gauge Sets, Dillon MWD Force Tester,Rockwell Dial Hardness Tester, Surface Plates, Etc.

WELDERS2 – MILLER MILLERMATIC 250 MIG WELDERS, S/N KK172014 &

LA191707 (1999 & 2000)2 – MILLER #SYNCHROWAVE 250 TIG WELDERS, S/N

KH362507 & KK072831 (1997 & 1999), with Miller Cooler2 – MILLER # MILLERMATIC 210 & 252 MIG WELDERS1 – LINCOLN # IDEALARC TIG 250 WELDER, S/N AC-626808

(1986)1 – LINCOLN IDEALARC TIG 250 AC/DC WELDING POWER

SOURCE, S/N AC-6268081 – HYPERTHERM # MAX 43 PLASMA CUTTING SYSTEM,

S/N 071044 MX43-002549

ROLLING STOCK • PLANT FACILITIES • PLANT SUPPORT

For more information, please visit us on the web at hilcoind.com/SuDanIndustrial 7

PLANT FACILITIES1 – MAYFRAN INGROUND SCRAP CONVEYOR SYSTEM, S/N 10D 3291,

36"W x 20'L Incline Steel Belt Conveyor, 180 Degree Jib Mounted RotaryDischarge Chute, 36"W x 250'L 4' Pit Mounted Sectional Shaker TypeScrap Conveyor

1 – PIQUA #HD2200 30" X 48" VERTICAL HYDRAULIC BALER1 – LUCIFER #RD7-H21 BOX TYPE FURNACE, S/N 6899, Max Temp 2200

Degrees F, KW 5.51 – 15 HP HORIZONTAL TANK MOUNTED AIR COMPRESSOR, Tank

Approx. 82” x 20” Dia, S/N 137096, #OEH366 15

PLANT SUPPORT1 – GUILD # PSA 2000 10" X .135" PORTABLE SHEAR END COIL

WELDER, with Lincoln Squarewave Tig 175 Welding Power Supply, S/NSPLC24997 / U1981200156, Motor Master 20000 Series Speed Control,Double End Grinder, Cart Mounted

1 – RIDGID 6,800 WATT GAS GENERATOR, YAMAHA 360 MZ GASOLINEENGINE, Capacity 6,800 Running Watts / 8,500 Starting Watts, Gen SmartLoad Indicator Hour Meter

1 – PARKER #10MF PORTABLE FLUID PUMP, S/N 30YV, Max Pressure 50PSI, Two (2) Pumps #CF2 1 100 VP 25F9Y N184 & #RF2 1 405A PP3YNF9 1 84

1 – CHORE MASTER #9.0 EX 27 PREMIUM PORTABLE PRESSUREWASHER

LARGE QUANTITY OF PLANT SUPPORT EQUIPMENT, Including: PalletRacking, Storage Rack System – 13 Rows with 74 Shelves – Capacity 4,000Lbs, Ropak 40x48 Collapsible Containers - #40x48 / #45x48 / 30x32, SteelParts Bins - 44" x 36" x 29" High Steel Parts Bins, 1 Yard Self DumpingHoppers, Assorted Plastic TotesLARGE QUANTITY OF: Moller Punches – Many Unused, Dadco & Moller DieCylinders, Shim Stock, Lamina Die Guides, Pepper & Fuchs Sensors, AllenBradley Panelview Terminals, Welder Control Boards, Gemco Boards, AllenBradley SLC Output Modules, Resolvers, Keyence Parts, Emerson/ControlTechniques Quantum III Drive, WP9000 Weld Probe Force Gauge, MilwaukeeHeavy Duty Rotary Hammer, Dremel 300 Series Rotary Tool, Tap & Die Sets,Master Thread Repair Sets, Husky Air Hammer, Portable Vibratory PartFeeders, Hand Tools, Fiberglass Ladders, Rolling Stair Case, Etc.

269 Kay Industrial Dr • Orion Twp., Michigan

Contact Steve Wolf for additional information

+1 616-466-7079 or email swolf@hilcoglobal.com

PROPERTY FEATURES• 65,337 Square Feet Available• 9,884 Square Feet Office• 6.5 Acres• 34’ Clear Height

• (7) Grade Level Doors• (5) Truckwells• Zoned Industrial• 130 Car Parking

ROLLING STOCK1 – HOIST #F160 16,000-LB. CAPACITY LPG FORKLIFT TRUCK, S/N 21686 (2000), Max Lift

93”, 2-Stage Mast, Forks 60”, Solid Tires, Back Tilt 7 Degrees1 – HYSTER #S155XL 15,000-LB. CAPACITY LPG FORKLIFT TRUCK, S/N B024D04782U

(1997), 2-Stage Mast, Cushion Tires7 – TOYOTA #8FGCU30 6,000-LB. CAPACITY LPG FORKLIFTS, S/N 14573, 14579, 14582,

14589, 14597, 14599 & 15163 (2009 & 2010), Max Lift 187”, 3-Stage Mast, Side Shift, ForkPositioner, Forks 48”, O/A Height 86”

1 – CATERPILLAR #GC30 6,000-LB. CAPACITY LPG FORKLIFT TRUCK, S/N 6EM02172 (1998)1 – MARK INDUSTRIES # MARKLIFT CH20NEP ELECTRIC SCISSOR TYPE PLATFORM LIFT, S/N

25341, 20' Max. Height, 800-Lb. Load Capacity, with Charge1 – MEC #2034 ELECTRIC SCISSOR TYPE PLATFORM LIFT, S/N 8102395 (1981), 20' Lift, with

Charger1 – NSS #WANGLER 27 WALK BEHIND ELECTRIC FLOOR SCRUBBER, S/N 277080D-

0301AACS, with Charger1 – CHEVROLET CHEVROLET SILVERADO 3500 STAKE BED TRUCK, VIN

1GBKC34J2WJ103030, Automatic Transmission, 7.4 L Gasoline Engine, Stake Bed 12’,Odometer Reads 47,176 Miles

1 – GMC SIERRRA PICKUP TRUCK, VIN 3GTP2VE39BG229400 (2011), Four Wheel Drive,Automatic Transmission, Full Crew Cab, Leather Interior, 5.3 L Gasoline Engine, OdometerReads 58,491 Miles; Cab Cover with Bed Liner

Turnkey OpportunityComplete Facility with Real Estate and Equipment

2011

Forwarding Service Requested

PresortedFirst Class MailU.S. Postage

PAIDDetroit, Mich.

Permit No. 2655

HILCO Industrial is a division of Hilco Global • Headquarters 5 Revere Drive, Ste. 206 • Northbrook, IL 60062 • All rights reserved

Printed in USA • SUD4482 • IL  License #444.000215 • Please visit our website at www.hilcoind.com to review our complete terms and conditions.

Terms of SaleA 16% buyer's premium will be charged on all assets when pay-ment is made by means of cash, cashier’s check, company check(with bank letter of guarantee) or wire transfer within 48 hours ofsale close. An 18% buyer's premium will be charged on all assetswhen payment is made by credit card (accepted for invoices of$2000 or less), or when payment is received after 48 hours of saleclose. An 18% buyer's premium will be charged for all BidSpotterpurchases with no discount for prompt payment. Everything willbe sold to the highest bidder for cash, in accordance with theAuctioneer’s customary “Terms of Sale”, copies of which will beposted on the premises of the sale and subject to additional termsannounced the day of sale. All items will be sold “as is, where-is”without any warranties, expressed or implied. Although obtainedfrom sources deemed reliable, the Auctioneer makes no warrantyor guarantee to the accuracy of the information herein contained.Bidders are encouraged to thoroughly inspect the items on whichthey intend to bid prior to sale. Absolutely no items will beremoved until the day after the conclusion of the sale and paymentis made in full. Subject to additions, deletions and prior sale. Forupdated information, please visit our website at www.hilcoind.comfor any changes to date, sale process, terms and conditions andlist of available assets.

Payment: INVOICES WILL BE EMAILED WITHIN 24 HOURSAFTER THE AUCTION CLOSES. Payment is to be made to HilcoIndustrial, LLC. Payment Options: VISA, Mastercard Discoveraccepted – if invoice total is $2,000 or less; Wire Transfer;Certified Check; or Company Check (with Bank letter of guaran-tee – see sample letter below). All sales are subject to sales tax.Purchasers claiming exemptions from taxes must provide proofsatisfactory to the Auctioneer of their entitlement to claim suchexemptions. Please see complete terms and conditions on ourwebsite, www.hilcoind.com.

Sample Bank Letter(Bank Name) unconditionally guarantees payment to Hilco Industrial from (Company Name). This guarantee will be valid for purchases made at the Auction ofSuDan - Kay Industrial on February 2, 2016.

FollowUs on:

A Hilco Global Company

Vested in Your Success

31555 W. Fourteen Mile Road, Suite 301Farmington Hills, MI 48334Ph: 248-254-9999Fx: 248-254-9995www.hilcoind.com

OVER 35 OFFICES THROUGHOUT NORTH, CENTRAL & SOUTH AMERICA, EUROPE, MIDDLE EAST, ASIA, AUSTRALIA

WEBCAST/ONSITE AUCTIONHilcoTM Industrial

Featuring Presses up to 1,000 Ton Capacity,Servo Feed Lines, Inspection & Tool Room Equipment

Complete PrecisionStamping Facility

Tuesday, February 2nd • 10:00 am Local TimeOrion, Michigan

Complete Facility with Press Lines, Cranes, Scrap Conveyor Line,

& Real Estate AVAILABLE IMMEDIATELY