A Hilco Global CompanyVested in Your Success

Late Model CNC Machining andAluminum Die Cast Facility

Equipment no longer

needed in the

continuing operations of

Harvey Industries

Sale Date: Thursday, March 6th

• 9:00 am Local Time

Aiken, South Carolina

WEBCAST/ONSITE AUCTIONHilco® Industrial

Hilco® Industrial31555 West Fourteen Mile Road, Suite 301

Farmington Hills, Michigan 48334 USAPhone 248-254-9999

www.hilcoind.comwww.diecastmachinery.com

Sale Offered in Conjunction with

Prefer click-to-bid? Register and bid on

To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)2

WEBCAST/ONSITE AUCTIONHilco® IndustrialDIRECTIONSFROM GILBERT INTERNATIONAL AIRPORT: EXIT AIRPORT I-20 WEST. TAkE EXIT 22 ANDTURN LEFT AT COLUMBIA HWY NORTH. FOLLOW TO RUTLAND DR AND TURN RIGHT. CON-TINUE TO UNIVERSITY PkWY. DESTINATION WILL BE ON THE RIGHT.

FURTHER INFORMATION• A 16% BUYER’S PREMIUM WILL BE CHARGED FOR ALL ONSITE PURCHASES. AN

18% BUYER’S PREMIUM WILL BE CHARGED FOR ALL HILCAST AND BIDSPOTTERPURCHASES. FOR HILCAST SALES ONLY; THE BUYER’S PREMIUM WILL BEREDUCED TO 16% FOR PAYMENTS MADE BY MEANS OF CASH, CASHIER’SCHECk, COMPANY CHECk (WITH BANk LETTER OF GUARANTEE) OR WIRETRANSFER WITHIN 48 HOURS OF SALE CLOSE. AUCTION WILL BE CONDUCTEDIN ENGLISH, ACCEPTING U.S. CURRENCY ONLY.

• REMOVAL DEADLINE IS MARCH 21ST (CONSIDERATIONS WILL BE MADE FOR DIE CASTCELLS – SEE CATALOG FOR DETAILS) WITH HOURS OF REMOVAL BETWEEN 8AM TO 4PMMONDAY THRU FRIDAY. BUYERS WITH ITEMS LEFT ON SITE AFTER DEADLINE ARE SUB-JECT TO FINES OF $500 PER DAY.

AUCTION DATE

THURSDAY, MARCH 6TH

BEGINNING AT 9AM LOCAL TIME

PREVIEw DATETUESDAY, MARCH 4TH & WEDNESDAY, MARCH 5TH

9:00AM – 4:00PM LOCAL TIMETO SCHEDULE AN INSpECTION, pLEASE CONTACT ED CErvACAT 847-849-2935, Or EMAIL ECErvAC@HILCOGLObAL.COM

AUCTION LOCATION2063 UNIVERSITY PARkWAY AIkEN, SC 29801

2013

Equipment no longer needed in the continuing operations of Harvey Industries

MACHINERY &  EQUIPMENT

ED CERVAC 847-849-2935 • ECERVAC@HILCOGLOBAL.COMPAYMENT INFORMATION

LESIA JOSEPH 616-328-6892 • LJOSEPH@HILCOGLOBAL.COMHILCO ACCOUNTS RECEIVABLE AT HIN_AR@HILCOGLOBAL.COMCUSTOMER SERVICE

+1 877-37-HILCO • +1 616-732-1800 • INFO@HILCOIND.COMSANDI NEELY AT 248-254-9999 X16 • SNEELY@HILCOGLOBAL.COM

Information contained herein deemed to be accurate at time of printing and subject to change. For updated information, please visit our website at www.hilcoind.com for any changes to

date, sale process, terms and conditions and list of available assets.

3 – FUJI MODEL CSD 400 300MM X 150MM FULLY AUTOMATED HORIZONTAL TWINSPINDLE CNC LATHES, S/Ns SE0097050, SE0095414, SE0095413 (All 2013),Spindle Diameter: 120mm, Swing Over Bed: 420mm, Max Workpiece Length: 300mm,Max Workpiece Diameter: 360mm, Travels: X-195mm, Z-315mm, Spindle Nose: A2-8,Spindle Bore: 67mm, Max Spindle Speed: 2220-RPM, Gantry Robot Handling Capacity:15-kG (33-Lbs.) per Hand (15 + 15 kG), with (2) 15/18.5-kW (20/25-HP) Spindle DriveMotors, Fanuc Oi-TD CNC Control, Marposs P7me Electronic Measuring System, 10-Pallet Work Stocker, Work Turn Over Device, Chip Conveyor, 220 Volt

For more information, please visit us on the web at www.hilcoind.com 3

(9) CNC LATHES

2012

(9) CNC LATHES3 – MORI SEIKI MODEL NLX2500/700 2-AXIS CNC

LATHES, S/Ns NL252130511, NL252130510,NL252121104 (New as 2013), MZ730BM Control,23.58" Swing Over Bed, 29.21" Swing Over CrossSlide, 37.83" Distance Between Spindle, 3.15" BarCapacity, X-10.24",Z-31.30", A2-8 Spindle Nose, 1181-IPM RapidTraverse, Tailstock, LNS 57508123 ChipConveyor, S/N NL252121104 has Chip BlasterModel SA34K High Pressure Coolant System, S/NJ215

1 – MORI SEIKI MODEL FRONTIER L1 CNCLATHE, S/N 252 (1995), MSC-521 Control,Tailstock, Chip Conveyor, 220 Volt

1 – MORI SEIKI MODEL AL-20ATM CNC LATHE,S/N 2791, Fanuc OT Mate Control, Tailstock, ChipConveyor, 220 Volt

1 – HITACHI SEIKI MODEL HITEC-TURN 30J CNCLATHE, S/N HTJ5039HL, Seicos J Control, ChipConveyor, 220 Volt

2013

(7) CNC VERTICAL MACHINING CENTERS

To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)4

2010

20022005

(7) CNC VERTICAL MACHINING CENTERS1 – MAZAK MODEL 510C II CNC VERTICAL MACHINING CENTER, S/N

S/N 184353 (2006), Mazatrol 640m Control, Table Area 51.18" x 21.65",Travels: X-41.34", Y-20.08", Z-20.08", Max. Distance From Table toSpindle Nose 25.98", Max. Table Load Wt. 2640 Lb., Max. SpindleSpeed 12,000 RPM, Spindle Taper BT40, 30-Position ATC, ChipConveyor

2 – MAZAK MODEL 410A CNC VERTICAL MACHINING CENTERS, S/Ns 171240 (2004), 160147 (2002), Mazatrol 640m Control, Table Area35.43" x 16.4", Travels: X-22.05", Y-16.14", Z-20.08", Max. DistanceFrom Table to Spindle Nose 25.98", Max. Table Load Wt. 1100 Lb., Max.Spindle Speed 12,000 RPM, Spindle Taper BT40, 30-Position ATC, ChipConveyor

2 – FADAL MODEL VMC4020A HT CNC VERTICAL MACHINING CENTERS, S/Ns 012005057752 (2005), 12004036166 (2004), Travels:X-40", Y-20", Z-20", 7,500 RPM Max. Spindle Speed, 20" x 48" T-SlottedTable, #40 CAT Taper, with Fadal Multi-Processor CNC Control, 21-Position ATC, Hennig Chip Conveyor, Coolant System

1 – FADAL MODEL VMC4020 CNC VERTICAL MACHINING CENTER,S/N 9612839 (1996), Travels: X-40", Y-20", Z-20", 7,500 RPM Max.Spindle Speed, 20" x 48" T-Slotted Table, #40 CAT Taper, with FadalMulti-Processor CNC Control, 21-Position ATC, Hennig Chip Conveyor,Coolant System

1 – CINCINNATI MILACRON MODEL SABRE 1250 CNC VERTICALMACHINING CENTER, S/N 7037A0A970380 (1997), Acramatic 2100Control, Table Area 54" x 30", 21-Position ATC, Chip Conveyor

(10) DIE CAST MACHINES

For more information, please visit us on the web at www.hilcoind.com 5

(2 oF 10) DIE CAST MACHINES1 – PRINCE MODEL 1246 CAA 1200 TON HORIZONTAL COLD CHAMBER ALUMINUM HIGH

PRESSURE DIE CAST MACHINE, S/N D-73032 (1973), 9.5" Diameter Tie Bars, 75" x 85" x17.75" Front Platen, 75" x 75" x 15.75" Moving Platen, 46.5" x 46.5" Distance Between TieBars, 30" Die Stroke, 24" to 44" Die Thickness, Hydraulic Motorized Die Height AdjustmentSystem, Individual Tie Bar Adjustment System, Twin Cylinder Hydraulic Bumper Plate EjectionSystem, Trabon Automatic Lubrication System, Air Safety Ratchet, Adjustable Die Stroke, TopHelper Side Automatic Tie Bar Puller, (1) Auxiliary Hydraulic Core Circuits and ElectronicStrain Gauges, PLC Controls

1 – BIRCH MODEL BMC-900-A 900 TON HORIZONTAL COLD CHAMBER ALUMINUM HIGHPRESSURE DIE CAST MACHINE, S/N 8040 (1980), 8" Tie Bar Diameter, 59.5" x 59.5" x 13"Moving Platen, 42" x 42" Distance Between Tie Bars, 30" Die Stroke, 24" to 44" Die Thickness,Twin Cylinder Hydraulic Bumper Plate Ejection, Electric Motorized Die Height System, AirSafety Ratchet Device, Power Operator Side Safety Door, Manual Helper Side Safety Door,(2) Auxiliary Hydraulic Moving Core Circuits, Allen Bradley SLC 5/01 Controls

(10) DIE CAST MACHINES continued • DIE CAST AUXILIARY EQUIPMENT

To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)6

Additional photos and Full Lot Catalog Available at

www.hilcoind.com

To 2007

To 2007

(8 oF 10) DIE CAST MACHINES1 – B&T MODEL DC-800-A 800 TON HORIZONTAL COLD CHAMBER ALUMINUM HIGH

PRESSURE DIE CAST MACHINE, 7" Tie Bar Diameter, 48" x 48" x 9" Moving Platen, 53" x48" x 10" Stationary Platen, 35" x 35" Distance Between Tie Bars, 16" to 22" Die Stroke, 12"to 36" Die Thickness, (2) Auxiliary Hydraulic Moving Core Circuits, Twin Cylinder HydraulicBumper Plate, Multiplier Cylinder with Piston Bottle and Air Safety Ratchet, Top Helper SideAutomatic Tie Bar Puller, Electric Motorized Die Height Adjustment System, Trabon AutomaticLinkage Lubrication System, Power Operator Side Safety Door and Manual Helper Side SafetyDoor, Allen Bradley PLC 5/03 Controls

3 – HPM MODEL II-800-A 800 TON HORIZONTAL COLD CHAMBER ALUMINUM HIGH PRESSURE DIE CAST MACHINES, S/Ns 79-092, 83-259, 84-007 (To 1984), 7" Tie BarDiameter, 55" x 55" x 11" Moving Platen, 34" x 34" Distance Between Tie Bars, 14" to 24" DieStroke, 14" to 38" Die Thickness, Hydraulic Motorized Die Height Adjustment System and AirSafety Ratchet, Hydraulic Bumper Plate Ejection System, (1) Auxiliary Hydraulic Side CoreCircuit on Moving Platen, Trabon Automatic Linkage Lubrication System, Manual Helper SideOperator Side Safety Door, Allen Bradley SLC 5/03 Controls

4 – HPM MODEL II-600-A 600 TON HORIZONTAL COLD CHAMBER ALUMINUM HIGH PRESSURE DIE CAST MACHINES, S/Ns 72-694, 74-096, 80-066, N/A (To 1980), 6" Tie BarDiameter, 48" x 48" Moving Platen, 29" x 29" Distance Between Tie Bars, 12" to 18" Die Stroke,14" to 36" Die Thickness, Hydraulic Motorized Die Height Adjustment and Air Safety Ratchet,Hydraulic Bumper Plate Ejection System, (2) with Auxiliary Hydraulic Side Core Circuit onMoving Platen, Trabon Automatic Linkage Lubrication System, Power Operator Side SafetyDoor, Allen Bradley SLC 5/03 Controls

DIE CAST AuxILIARy EquIpMENT5 – REGLOPLAS 36 KW PORTABLE HOT OIL PROCESS HEATER / TEMPERATURE

CONTROLLERS, Model 301 DG Dual Zone, S/N 0257007003 (2004), RT45 Controls; (5) Model301 Single Zone, S/Ns 0256002603, 0256002604, 0256002601, N/A (To 2005), RT50 Controls

1 – REGLOPLAS MODEL 90XL 20 KW SINGLE ZONE PORTABLE HOT WATER PROCESSHEATER / TEMPERATURE CONTROLLER, S/N 980554, RT22 Controls

2 – VISI-TRAK MODEL TRU-TRACK 20/20 M29-FT2CMA DIE CAST MONITORING AND DATACOLLECTION UNITS, S/Ns K13007, N/A, w/ Graphic HMI Interface

9 – RIMROCK MODEL 410-60 INCH MULTI-LINK AUTOMATIC RECIPROCATING DIE LUBRICATIONSPRAYERS, S/Ns C-11120, C-11117, C-11113, C-11115, C-11118, NA (To 2007), For Die Castingand Foundry Operations, Fully Programmable Auto-Teach Mode via Cimrex 70 or TriangleControls, Motorized Horizontal Base Adjustment to Compensate for Varying Die Thicknesses,Dual Lube System, Epic or Triangle Controls

1 – SNAIR MODEL L-904 LINEAR AUTOMATIC LADLE, S/N 4776, For Aluminum and Brass DieCasting and Foundry Operations, Allen-Bradley Programmable Logic Controls

2 – ADVANCE PRODUCTS MODEL SL-1200 MULTI-LINK AUTOMATIC LADLES, S/Ns 32288-07,32232-04 (To 2007), For Aluminum and Brass Die Casting and Foundry Operations, AdvanceForward on Pour Command – Pour Forward, LCD Color Touch-Screen HMI, "On the Fly" ShotSize Adjustment, 25 Pound Shot Weight Capacity, Multi-Link Controls

3 – RIMROCK MODEL 305-70 INCH MULTI-LINK AUTOMATIC LADLES, S/Ns C-11122, N/A (To2007), For Aluminum and Brass Die Casting and Foundry Operations, Works on EitherOperator or Helper Side of Machine, Automatic Pour Back Feature, Simple Mechanism,Interchangeable Parts with Other Rimrock Models, Controls

1 – ADVANCE PRODUCTS MULTI-LINK AUTOMATIC LADLE, For Aluminum and Brass DieCasting and Foundry Operations, Controls

2 – MOKON MODEL H54148Z6 48 KW SINGLE ZONE PORTABLE HOT OIL PROCESSHEATER / TEMPERATURE CONTROLLERS, S/Ns 7009959, N/A, Mokon DependabilityControls

(13) MELTING & HOLDING FURNACES

For more information, please visit us on the web at www.hilcoind.com 7

(13) MELTING & HoLDING FuRNACES1 – LINDBERG MPH MODEL 62-ADH-3000-E 3000 POUNDS/HOUR DRY HEARTH TYPE NATURAL

GAS FIRED STATIONARY ALUMINUM MELTING AND HOLDING FURNACE, S/N R7022 (1995),Dry Hearth Primary Melting Area with Charge Door for Ingots, Sows and Scrap, High Melt Rate to BathRatio, Digital Controls

1 – LINDBERG MPH MODEL LE 1816-L 2300 POUND LOW ENERGY HIGH EFFICIENCY ELECTRICHEATED ALUMINUM HOLDING FURNACE, S/N 39284/1 (1984), Castable Refractory, RoofMounted Electric Resistance Heating Elements, Separate Dip-out Well for Easy Auto-ladle Access,Eurotherm Digital Temperature Controls

1 – LINDBERG MPH MODEL LE 1816-L 2000 POUND LOW ENERGY HIGH EFFICIENCY NATURALGAS HEATED ALUMINUM HOLDING FURNACE, Single Low Energy Roof Mounted Natural GasBurner – Removable Roof Design for Ease of Service, Dip-out Well for Easy Auto-ladle Access,Separate Charge Well, Digital Controls

1 – THERMALTEK MODEL EL-2000 2000 POUND LOW ENERGY HIGH EFFICIENCY ELECTRICHEATED ALUMINUM HOLDING FURNACE, Dip-out Well for Easy Auto-ladle Access, RoofMounted Heating Elements – Removable Roof Design for Ease of Service, Separate Charge Well,Digital Controls

1 – STRIKO WESTOFEN MODEL MH II-N 2000/1500 G-EG 1500 KG/HOUR STACK(TOWER/SHAFT) TYPE STATIONARY ALUMINUM MELTING AND HOLDING FURNACE, S/N9100 (2005), Equipped with Striko Westoffen Skip-charging Unit Type K1000 Charging Unit, HighEfficiency Design, High Melt Rate to Bath Size Ratio, Low Dross Rate, Allen Bradley SLC 5/04 SolidState Programmable Controls

1 – GASMAC MODEL 62-GH 1800 POUND LOW ENERGY HIGH EFFICIENCY NATURAL GASHEATED ALUMINUM HOLDING FURNACE, Dip-out Well for Easy Auto-ladle Access, Single LowEnergy Roof Mounted Natural Gas Burner – Removable Roof Design for Ease of Service, SeparateCharge Well, Digital Controls

3 – LINDBERG MPH MODEL 62-GH 1800 POUND LOW ENERGY HIGH EFFICIENCY NATURALGAS HEATED ALUMINUM HOLDING FURNACES, S/Ns R8149, N/A (To 1999), Dip-out Welldesigned for easy Auto-ladle Access, Single Low Energy Room Mounted Natural Gas Burner –Removable Roof Design for Ease of Service, Separate Charge Well, Digital Controls

1 – STRIKO WESTOFEN MODEL W 1700 SL PRODOS 1700 KG LOW ENERGY ELECTRICHEATED ALUMINUM HOLDING AND DOSING FURNACE, S/N 9048 (2004), ProDos DiecastingPrecision Control Technology, Fully Adjustable Lift/Tilt Frame for Furnace Position Adjustment,Charge (fill) Furnace While Dosing, Westomat Fully Automatic Crucible-Free Dosing System,Prodos DPC Controls

3 – STRIKO WESTOFEN MODEL W 900 SL PRODOS 900 KG LOW ENERGY ELECTRIC HEATEDALUMINUM HOLDING AND DOSING FURNACES, S/Ns 7878, 9515, 9514 (To 2005), ProDosDiecasting Precision Control Technology, Fully Adjustable Lift/Tilt Frame for Furnace Position Adjustment, Charge (fill) Furnace While Dosing, Westomat Fully Automatic Crucible-Free DosingSystem, Prodos DPC Controls

(10) TRIM PRESSES

To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)8

2008

2006

(10) TRIM pRESSES2 – REIS MODEL SEP 10-65 DIII 65-TON FOUR POST VERTICAL

HYDRAULIC DIE CASTING TRIM PRESSES, S/Ns 121062, 121060 (Both

2006), 39" x 28" Distance Between Post, 24" / 36” Stroke, 46", 48” / 36”

Daylight, Air Safety Ratchet, T-Slotted Platens, Automatic Lubrication

System, Top Mounted Hydraulics, Siemens / Allen Bradley Controls

1 – PEERLESS 60-TON HYDRAULIC DOWN-ACTING FOUR POST TRIM

PRESS, 59" x 47" Bed Area, 48" x 36" Distance Between Post, 24" Stroke,

48" Daylight, T-Slotted Platens, Dual Palm Button Operation, Allen Bradley

SLC 500 Controls

1 – PEERLESS 50-TON HYDRAULIC DOWN-ACTING 4-POST TRIM PRESS,

85" x 53" Bed Area, 60" x 30" Distance Between Post, 20" Stroke, 36"

Daylight, T-Slotted Platens, Dual Palm Button Operation

1 – BIRCH MODEL BMC-50-A 50-TON FOUR POST VERTICAL HYDRAULIC

DIE CASTING TRIM PRESS, 61.5" x 37" Bed Area, 49" x 26" Distance

Between Post, 24" Stroke, 30" Daylight, Air Safety Ratchet and (1) Auxiliary

Hydraulic Side Core/Punch Circuit, T-Slotted Platens, Dual Pull Out Bars, Top

Mounted Hydraulics and Fixed Ejector Plate, Allen Bradley SLC 501 Controls

1 – METAL MECHANICS 50-TON FOUR POST VERTICAL HYDRAULIC DIE

CASTING TRIM PRESSES, S/N 28833 (2008), 63" x 47" Bed Area, 52.5" x

36.5" Distance Between Post, 22" Stroke, 36" Daylight, T-Slotted Platens,

Dual Palm Button Operation, Allen Bradley Controls

1 – METAL MECHANICS MODEL 35-T 35-TON FOUR POST VERTICAL

HYDRAULIC DIE CASTING TRIM PRESS, 42" x 32" Bed Area, 31" x 21"

Distance Between Post, 12" Stroke, 27" Daylight, Air Safety Ratchet and

Dual Palm Button Operation, (1) Auxiliary Side Core Circuits, Fixed Ejector

Plate, Drilled and Tapped Moving and Bed Platens, Allen Bradley SLC 500

Controls

1 – HANNIFIN 30-TON FOUR POST VERTICAL HYDRAULIC DIE CASTING

TRIM PRESS, S/N A 45168, 60" x 48" Bed Area, 49" x 36" Distance Between

Post, 24" Stroke, 36" Daylight, Top Mounted Hydraulics, Drilled and Tapped

Moving and Bed Platens, Mechanical Ejector Bars, Dual Palm Button, Allen

Bradley MicroLogix Controls

1 – KARD MODEL TP-30-4 30-TON FOUR POST VERTICAL HYDRAULIC DIE

CASTING TRIM PRESS, S/N TK-1977, 60" x 30" Bed Area, 33.75" x 12"

Distance Between Post, 24" Stroke, 37" Daylight, Air Safety Ratchet, Drilled

and Tapped Bed and Moving Platen, Dual Palm Button Operation, Fixed

Ejector Plate and Top Mounted Hydraulics, Allen Bradley SLC 500 Controls

1 – BIRCH MODEL BMC-30-A 30-TON FOUR POST VERTICAL HYDRAULIC

DIE CASTING TRIM PRESS, 60" x 36" Bed Area, 48" x 24" Distance

Between Post, 24" Stroke, 28" Daylight, Air Safety Ratchet, T-Slotted

Platens, Dual Pull Out Bars, Top Mounted Hydraulics and Fixed Ejector

Plate, Allen Bradley MicroLogix Controls

(14) ROBOTS • FLYWHEEL CUTTER CELLS • EDM’s

For more information, please visit us on the web at www.hilcoind.com 9

2004

2012 Refurbished 2012

(14) RoboTS1 – FANUC MODEL M-20iA 6-AXIS ROBOT, S/N F129649 (2012), (Never

Installed), R-30iB Control, Type A05B-1222-B202

1 – ABB MODEL IRB 6600 2.55 METER 6-AXIS FOUNDRY RATEDROBOT, S/N 66-42019 (2006), w/ Extractor Package/Gripper forExtracting Die Castings, Compact Arm Design, ABB Foundry GradeUpgrade Option, S4C+ Controls

2 – ABB MODEL IRB 6600 2.40 METER 6-AXIS FOUNDRY RATEDROBOTS, S/Ns 66-42021, 66-27963 (To 2008), w/ ExtractorPackage/Gripper for Extracting Die Castings, Compact Arm Design,Fast Maneuverability, Heavy Payload Capability, Renowned ABB Partsand Service, S4C+ Controls

6 – ABB MODEL IRB 6400 2.40-120 METER 6-AXIS FOUNDRY RATEDROBOT, w/ Extractor Package/Gripper for Extracting Die Castings,Compact Arm Design, Heavy Payload Capability, ABB Controls

1 – ABB MODEL IRB 6400 2.40 METER 6-AXIS FOUNDRY RATEDROBOT, w/ Extractor Package/Gripper for Extracting Die Castings,Compact Arm Design, Heavy Payload Capability, S4C+ Controls

3 – ABB MODEL IRB 4400 1.96 METER 6-AXIS FOUNDRY RATEDROBOTS, w/ Extractor Package/Gripper for Extracting Die Castings,Compact Arm Design, Medium to Heavy Payload Capability, ABB Controls

FLywHEEL CuTTER CELLS1 – FLY CUTTER CELL, Allen Bradley PanelView 600 Control Interface, (2) Master # PFSP5

Machining Heads, Inspection Station, Drill Station & Marking Station

2 – FLY CUTTER CELLS, (2) Master # HW15-18-24-H3 Machining Heads w/ (8) Station IndexTable, Inspection Station, Drill Station & Marking Station, Allen Bradley Controls

ELECTRICAL DISCHARGE MACHINES1 – CDM ROVELLA MODEL VS 600 HS SINKER TYPE ELECTRICAL DISCHARGE MACHINE,

S/N HV6H6SP1869 (2004), Spazio Control, Table Area 31 3/8" x 19-5/8", 400 Volt

1 – BELMONT MODEL MAXICUT SINKER TYPE ELECTRICAL DISCHARGE MACHINE,Table Area 24" x 14"

Additional photos and Full Lot Catalog Available at

www.hilcoind.com

QUALITY CONTROL & INSPECTION EQUIPMENT • TOOL ROOM EQUIPMENT

To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)10

TooL RooM EquIpMENT2 – HARRISON MODEL M350 ENGINE LATHES, S/N 351524,

15" X 60", S/N M350527 538, 15" X 40", Inch and Metric Threading,(12) Spindle Speeds 40 – 2200 RPM, Spindle Bore 2.2", 10" 3-JawChuck, Coolant, 230 Volt

1 – SHELDON MODEL GR-60-P 15" X 30" ENGINE LATHE, S/N GR-26495, (8) Spindle Speeds 45 – 1250 RPM, Spindle Bore 1.5",10" 3-Jaw Chuck

3 – SPORT MODEL K3 3-HP VERTICAL MILLING MACHINES, S/Ns00-683, 004BM10496, 98-0524, Proto Trak M3 Control, Table Area10" x 50", Spindle Speeds 0 – 4200 RPM, Power Draw Bar

1 – BRIDGEPORT SERIES II 4-HP VERTICAL MILLING MACHINE,S/N 2673, Table Area 11" x 58", Spindle Speeds 50 – 3500 RPM, 3-Axis D.R.O.

1 – ACER MODEL AGS-2040AHD 20" X 40" HYDRAULIC SURFACEGRINDER, S/N N6050116 (2006), 19.5" x 39.5" Electro-MagneticChuck, Incremental Downfeed, 2-Axis D.R.O., Over The WheelDresser, Coolant w/ Magnetic Separator

quALITy CoNTRoL & INSpECTIoN EquIpMENT1 – SPECTRO ANALYTICAL MODEL SPECTROMAXX LMF04 METAL ANALYTIC SPECTROMETER, S/N

08000193 (2008)

1 – OGP INC. MODEL SMARTSCOPE FLASH 625 MEASURING MACHINE, S/N SVW6252134 (2008), MeasuringRange 20" x 24" x 8"

1 – MAHR MODEL MARFORM MMQ 400-2 FORM MEASURING MACHINE, S/N 3096 (2013)

1 – MITUTOYO MODEL FORMTRACER SV-3200H4 SURFACE ROUGHNESS & CONTOUR MEASURINGMACHINE, S/N 20091208 (2012), w/ S-3000 & C3200 Heads

1 – MITUTOYO MODEL PH-14LS 14" OPTICAL COMPARATOR, S/N 200204, w/ QM-Data 200 Read Out

1 – TESA MODEL 350 DIGITAL HEIGHT GAGE, S/N 7L-016-02750

WELDERS • BRIDGE CRANES • SHOP SUPPORT EQUIPMENT

For more information, please visit us on the web at www.hilcoind.com 11

2012

2012TooL RooM EquIpMENT, cont.1 – HARTFORD MODEL GM1-00 8" X 18" HYDRAULIC SURFACE

GRINDER, S/N IH05, 8" x 18" Permanent Magnetic Chuck, IncrementalDownfeed, 2-Axis D.R.O., Coolant

1 – CARLTON MODEL 1A 4' X 11" RADIAL ARM DRILL, S/N 2296, (24)Spindle Speeds 40 – 2000 RPM, Quill Diameter 2.5", Quill Travel 12", 24"x 18" x 20" High Box Table

1 – LUX MODEL 828 28" X 8" RADIAL ARM DRILL, S/N 7614, (6) SpindleSpeeds 88 – 1500 RPM, Quill Diameter 2 5/8", 19" x 16" x 15" High Box Table

1 – HYD MECH MODEL S-20 SERIES II 13" X 18" HORIZONTAL BANDSAW, 1" Blade, Coolant, 240 Volt

1 – KYSOR 24" VERTICAL BAND SAW, S/N 183806, 26" x 26" Table, BladeWelder

1 – JET 18" VERTICAL BAND SAW, S/N 1101702, 19" x 19" Table

1 – DAKE MODEL 75M 75-TON H-FRAME SHOP PRESS, S/N 174705, 44"Between Housings

1 – AMERICAN MODEL H-2-30 6-TON HORIZONTAL HYDRAULICBROACH, S/N 5824

QUANTITY OF TOOL ROOM EQUIPMENT Including Hand Surface Grindersto 6” x 18”, H-Frame Shop Presses, Drill Presses, Etc.

bRIDGE CRANES1 – ENGINEERED SYSTEMS 20-TON X 25' SPAN FREE-

STANDING DOUBLE GIRDER TOP RIDING OVERHEADBRIDGE CRANE, S/N 34140, Pendant Control, 60'L BoltConstructed Free Standing Runway

2 – CLEVELAND TRAMRAIL 5-TON X 25' SPAN SINGLEGIRDER UNDERHUNG OVERHEAD BRIDGE CRANES,5-Ton Capacity Hoist, Pendant Control

1 – CAROLINA 2-TON X 20' SPAN SINGLE GIRDERUNDERHUNG OVERHEAD BRIDGE CRANE, w/ 2-TonCapacity Hoist, Pendant Control

SHop SuppoRT EquIpMENT1 – MECCO MODEL MECCOMARK 20W 20-WATT LASER

MARKING MACHINE, S/N 95290 (2012), 20-WattYtterbium Fiber Laser, Infrared IR 1060-1070nmWavelength, Laser Scanning Head with Flat Field Lens andPC Controls

1 – RANSOHOFF MODEL LEAN JET RB STAINLESSSTEEL BASKET TYPE PARTS WASHER, S/N 5248(2012), Siemens Simatic Control, Holds (4) 24-1/4" x 19-11/16" x 6-5/16" High Baskets, Production Rate 36 BasketsPer Hour, (16) Wash Nozzles w/ 290 Gallon Tank, (8) RinseNozzles w/250 Gallon Tank

1 – MSI CORPORATION MODEL VB630 VERTICAL BALER,S/N 973, Bale Chamber 42" x 60" x 30", 230 Volt

1 – LUCIFER MODEL RD8-H21 DUAL CHAMBER ELECTRIC HEAT TREAT OVEN, S/N 6303, Chamber Size9" x 12" x 21", Max. Temps 2200° and 1200°, 230 Volt

2 – STEEL BELT SCRAP CONVEYORS, Prab and Titan

1 – FORD MODEL F250 3/4 TON PICKUP TRUCK, VIN1FTHF25H5RNA94470 (1994), 8' Bed, AutomaticTransmission

partial Listing only, please Visit

www.hilcoind.comFor Complete Lot Catalog

Forwarding Service Requested

PresortedFirst Class MailU.S. Postage

PAIDDetroit, Mich.

Permit No. 2655

HILCO Industrial is a division of Hilco Global • Headquarters 5 Revere Drive, Ste. 206 • Northbrook, IL 60062 • All rights reserved

Hilco Industrial, LLC South Carolina Auctioneer & License: Tim Pfister License #AUC.4364 • SC License #AF.4008 • IL License #444.000215

Printed in USA • HAR2431 • Please visit our website at www.hilcoind.com to review our complete terms and conditions.

Terms of SaleA 16% buyer’s premium will be charged for all onsite purchases.An 18% buyer’s premium will be charged for all Hilcast andBidspotter purchases. For Hilcast sales only; the buyer’s premiumwill be reduced to 16% for payments made by means of cash,cashier’s check, company check (with bank letter of guarantee) orwire transfer within 48 hours of sale close. Everything will be soldto the highest bidder for cash, in accordance with the Auctioneer’scustomary “Terms of Sale”, copies of which will be posted on thepremises of the sale and subject to additional terms announcedthe day of sale. All items will be sold “as is, where-is” without anywarranties, expressed or implied. Although obtained from sourcesdeemed reliable, the Auctioneer makes no warranty or guaranteeto the accuracy of the information herein contained. Bidders areencouraged to thoroughly inspect the items on which they intendto bid prior to sale. Absolutely no items will be removed until theday after the conclusion of the sale and payment is made in full.Subject to additions, deletions and prior sale. For updated infor-mation, please visit our website at www.hilcoind.com for anychange to date, sale process, terms and conditions and list ofavailable assets.Payment: ALL  PURCHASES  MUST  BE  PAID  IN  FULL  ON  THEDAY  OF  THE  AUCTION. If you intend to pay by wire transfer, wewill accept payment the day after the sale ONLY  IF  a deposit of25% of total purchases is made on the day of the sale. Contactour office for wire transfer instructions. Only cash, wire transfer orcertified check, payable to Hilco Industrial will be accepted.Company checks payable to Hilco Industrial will be accepted onlyif accompanied by a bank letter of guarantee, (see sample letterbelow). All sales are subject to sales tax. Purchasers claimingexemptions from taxes must provide proof satisfactory to theAuctioneer of their entitlement to claim such exemptions.

Sample Bank Letter(Bank Name) unconditionally guarantees payment to Hilco Industrial from (Company Name). This guarantee willbe valid for purchases made at the Auction of HarveyIndustries on March 6, 2014.

FollowUs on:

A Hilco Global Company

Vested in Your Success

31555 W. Fourteen Mile Road, Suite 301Farmington Hills, MI 48334Ph: 248-254-9999Fx: 248-254-9995

www.hilcoind.com

OVER 35 OFFICES THROUGHOUT NORTH, CENTRAL & SOUTH AMERICA, EUROPE, MIDDLE EAST, ASIA, AUSTRALIA

WEBCAST/ONSITE AUCTIONHilco® Industrial

Late Model CNC Machining andAluminum Die Cast Facility

Equipment no longer

needed in the

continuing operations of

Harvey Industries

Sale Date: Thursday, March 6th

• 9:00 am Local Time

Aiken, South Carolina