Upload
phungque
View
222
Download
0
Embed Size (px)
Citation preview
High Quality Marine Pipe6463 Marine Pipe comes Boxed and Poly-SleevedSuggested Applications: T-Tops, Tuna Towers, Half Towers, Marlin Towers, Leaning Posts, Bow Rails, Poling Platforms, etc.
Western Extrusions: POLISHED Bright Dipped Anodized
SCH 40 Pipe x 23’ (6463-T66)
Stock Code Size in Inches Pcs/Box (Lin Ft/Box)
25-BDW-105A* 3/4 10 (230’)
25-BDW-110A* 1 6 (138’)
25-BDW-115 1-1/4 6 (138’)
25-BDW-120 1-1/2 5 (115’)
25-BDW-125 2 4 (92’)
25-BDW-130 2-1/2 2 (46’)
25-BDW-135 3 2 (46’)
Western Extrusions: LITE BRUSHED Bright Dipped Anodized
SCH 40 Pipe x 23’ (320 grit) (6463-T66)
25-BRW-105B* 3/4 10 (230’)
25-BRW-110B* 1 6 (138’)
25-BRW-115 1-1/4 6 (138’)
25-BRW-120 1-1/2 5 (115’)
25-BRW-125 2 4 (92’)
25-BRW-130 2-1/2 2 (46’)
25-BRW-135 3 2 (46’)
Western Extrusions: POLISHED Bright Dipped Anodized
SCH 80 Pipe x 23’ (6463-T66)
26-BDW-115 1-1/4 6 (138’)
26-BDW-120 1-1/2 5 (115’)
25-BD-125C 2 4 (92’)
26-BDW-130 2-1/2 2 (46’)
Western Extrusions: LITE BRUSHED Bright Dipped Anodized
SCH 80 Pipe x 23’ (320 Grit) (6463-T66)
26-BRW-115 1-1/4 6 (138’)
26-BRW-120 1-1/2 5 (115’)
26-BRW-215 2 4 (92’)
BON-L: POLISHED Bright Dipped Anodized
SCH 40 Pipe x 23’ (6463-T67)
Stock Code Size in Inches Pcs/Box (Lin Ft/Box)
25-BD-100 1/2 16 (368’)
BON-L: LITE BRUSHED Bright Dipped Anodized
SCH 40 Pipe x 23’ (320 Grit) (6463-T67)
25-BR-100 1/2 16 (368’)
25-BR-105B* 3/4 12 (276’)
25-BR-110B* 1 8 (184’)
25-BR-115 1-1/4 6 (138’)
25-BR-120 1-1/2 5 (115’)
BON-L: POLISHED Bright Dipped Anodized
SCH 80 Pipe x 23’ (6463-T67)
26-BD-110 - NEW! 1 6 (138’)
EMS FL1-800-432-2204
(561) 588-4780 - fax
EMS NC1-800-343-8154
(704) 391-2267 - fax
EMS TX1-800-996-6061
(281) 656-2297 - fax
EMS MO1-888-822-6061
(314) 344-3349 - fax
Additional Locations: West Palm Beach & Lakeland, FL; Newark, DE; Birmingham, AL; Akron, OH; Van Buren, AR
website: www.EasternMetal.com e-mail: [email protected] version: 08/22/16Eastern Metal Supply
Marine 01
Scan QR Code to view
Marine Section online
SCH 40 Aluminum Pipe End Caps
Mill Finish
APC-100-MF 1
APC-125-MF 1-1/4
APC-150-MF 1-1/2
APC-200-MF 2
Anodized
APC-750 3/4
APC-100 1
APC-125 1-1/4
APC-150 1-1/2
APC-200 2
SCH 40 Black Plastic End Caps
RN1-1/4DBK1 1”
* Designed for 3/4” and 1” Sleeve TogetherPipe Aligners Available: Marine p15
Polished and
Bright Dipped
Lite Brushed
and Bright Dipped
EMS FL1-800-432-2204
(561) 588-4780 - fax
EMS NC1-800-343-8154
(704) 391-2267 - fax
EMS TX1-800-996-6061
(281) 656-2297 - fax
EMS MO1-888-822-6061
(314) 344-3349 - fax
Addt’l Locations: West Palm Beach & Lakeland, FL; Newark, DE; Birmingham, AL; Akron, OH; Van Buren, AR
website: www.EasternMetal.com e-mail: [email protected] version: 02/22/18Eastern Metal Supply
Marine 02
6463 Marine Pipe - 6463 Marine Pipe comes Boxed and Poly-SleevedPolished/Non-Anodized SCH 10 Marine Pipe (6463)
Stock Code Size in Inches Pcs/Box (Lin Ft/Box)
52-63-5179 1-1/2 x 20’ 6 (120’)
Mill Finish SCH 40 Marine Pipe (6463)
Stock Code Size in Inches Pcs/Box (Lin Ft/Box)
52-63-6926 3/4 x 23’ 12 (276’)
52-63-6927 1 x 23’ 10 (230’)
52-63-6928 1-1/4 x 23’ 6 (138’)
52-63-6929 1-1/2 x 23’ 6 (138’)
52-63-6930 2 x 23’ 4 (92’)
52-63-6931 2-1/2 x 23’ 2 (46’)
Mill Finish SCH 80 Marine Pipe (6463)
Stock Code Size in Inches Pcs/Box (Lin Ft/Box)
52-63-6933 2 x 23' 2 (46’)
52-63-6932 2-1/2 x 23' 2 (46’)
Mill Finish Structural PipeMill Finish SCH 10 Aluminum Pipe (6463-T67)
Stock Code Size in Inches
32-64-210 2 x 23’
SCH 40 Aluminum Pipe
Mill Finish - 6063-T52 Mill Finish - 6061-T6Stock Code Size in Inches Stock Code Size in Inches
18-63-220 3/4 x 20’ 18-61-215 1/2 x 20’
18-63-221 3/4 x 23’ 18-61-220 3/4 x 20’
18-63-225 1 x 20’ 18-61-222 3/4 x 24’
18-63-226 1 x 23’ 18-61-225 1 x 20’
18-63-230 1-1/4 x 20’ 18-61-230 1-1/4 x 20’
18-63-233 1-1/4 x 23’ 18-61-235 1-1/2 x 20’
18-63-232 1-1/4 x 24’ 18-61-240 2 x 20’
18-63-235 1-1/2 x 20’ 18-61-241 2 x 24’
18-63-236 1-1/2 x 23’ 18-61-243 2 x 30’
18-63-240 2 x 20’ 18-61-246 2-1/2 x 22’
18-63-241 2 x 23’ 18-61-245 (NC) 2-1/2 x 20’
18-63-245 2-1/2 x 20’ 18-61-250 3 x 20’
18-63-250 3 x 20’
Bright Dipped Anodized Drawn Tube x 20’Suggested Applications: Bow Rails, Handrails, Canvas Top Frames, Bimini Tops, etc.
Stock Code Size in Inches Lgths./Box Stock Code Size in Inches Lgths./Box
25-BD-460 3/4 x .058 54 25-BD-467 7/8 x .058 (24’) 38
25-BD-463 7/8 x .058 (16’) 38 MILL ORDER 25-BD-468 7/8 x .095 38
25-BD-465 7/8 x .058 38 25-BD-469 7/8 x .095 (24') 38
Superbuff Stainless Steel Tube x 24’ 2” - INCREASED INVENTORIES!316 Alloy - typically used in Freshwater applications 304 Alloy - typically used in Saltwater applications25-316-100 7/8 x 16 gauge (.062) 30 25-304-100 7/8 x 16 gauge (.062) 30
25-316-105 1 x 16 gauge (.062) 16 25-304-105 1 x 16 gauge (.062) 16
Mill Finish Pipe
Pipe Aligners Available:Marine p 15
SCH 40 Aluminum
Pipe End Caps
Mill Finish
APC-100-MF 1
APC-125-MF 1-1/4
APC-150-MF 1-1/2
APC-200-MF 2
Anodized
APC-750 3/4
APC-100 1
APC-125 1-1/4
APC-150 1-1/2
APC-200 2
SCH 40 Black
Plastic End Caps
RN1-1/4DBK1 1”
EMS FL1-800-432-2204
(561) 588-4780 - fax
EMS NC1-800-343-8154
(704) 391-2267 - fax
EMS TX1-800-996-6061
(281) 656-2297 - fax
EMS MO1-888-822-6061
(314) 344-3349 - fax
Addt’l Locations: West Palm Beach & Lakeland, FL; Newark, DE; Birmingham, AL; Akron, OH; Van Buren, AR
website: www.EasternMetal.com e-mail: [email protected] version: 01/18/18Eastern Metal Supply
Marine 03
Oval Tube and Ladder Rung
Oval Tube x 20’ (6463-T67) Available: Polished and Bright Dipped, Brushed and Bright Dipped and Mill Finish
Suggested Applications: Ladder Steps, T-Top Braces, Tower Supports, etc.Stock Code Size in Inches Lgths./Box
52-63-6354 1 x 1-1/2 (Mill Finish) 10
25-BD-200 1 x 1-1/2 (BDA Polished) 10
25-BR-200 1 x 1-1/2 (BDA Brushed) 10
25-MF-220 1 x 1-7/8 (Mill Finish) x 22’ 8
25-BR-205 1 x 1-7/8 (BDA Brushed) 8
25-BD-205 1 x 1-7/8 (BDA Polished) 8
25-BD-208 1-1/4 x 2-3/8 (BDA Polished) 6
25-BD-210 1-1/4 x 3 (BDA Polished) 6
25-BR-210 1-1/4 x 3 (BDA Brushed) 6
25-MF-210 1-1/4 x 3 (Mill Finish) 6
25-BD-215 1-1/4 x 4 (1/8” wall - BDA Polished) 4
25-BR-215 1-1/4 x 4 (1/8” wall - BDA Brushed) 4
25-64-216 1-1/4 x 4 (1/8” wall - Mill Finish) 4
25-BRW-217 1-1/4 x 4 (.140” wall - BDA Brushed) 4
Ladder Rung Extrusions40-05-100 2 x 1 Ladder Rung 0.622
MILL ORDER 40-05-105K 2 x 1 Ladder Rung (Knurled) 0.622
Slotted Oval Tube x 20’ (Polished and Bright Dipped 6463-T67)
25-BD-250 1 x 1-1/2 (small insert VI-SM) 10
25-BD-255 1 x 1-7/8 (large insert VL-LG) 8
25-BD-212 1-1/4 x 3 (double slot; small insert VI-SM) 6
25-BD-206 1 x 1-7/8 (3 slots 40-63-2060; polished) 8
25-MF-206 1 x 1-7/8 (3 slots 40-63-2060; Mill Finish) 8
Insert MaterialVI-SM 1-1/2 (mates with 25-BD-250 & 25-BD-212)
VI-LG 1-7/8 (mates with 25-BD-255)
40-63-2060 3 Groove Tread Insert (bagged 20’ sections; mates with 25-BD/MF-206)
Polished and Bright Dipped Oval Tube with Ribs x 20’ (6463-T66)
Applications: Ladder Steps, T-Top Braces, Tower Supports, etc.MILL ORDER 25-BD-225 1 x 1-1/2 (3 Ribs) 10
25-BD-245 1 x 1-1/2 (7 Ribs) 10
Polished and Bright Dipped Oval Tube x 20’ - Non Skid (6463-T67)
Applications: Ladder Steps, T-Top Braces, Swim Platforms, etc.Non-Skid Finish on Both Flat Surfaces, All other surfaces are Polished25-NS-200 1 x 1-1/2 (Non Skid) 10
25-NS-205 1 x 1-7/8 (Non Skid) 8
25-NS-215 1.29 x 1.757 Tower Step x 20’ 8
25-BD-226 3" Knurled Ladder Rung x 12'
DVLDR Black Dive Ladder End Caps; Mates with 25-BD-226
Polished and
Bright Dipped
Insert Material (top to bottom):
VI-SM, VI-LG, 40-63-2060
3 Slotted Oval
Tube with Insert
Polished and Bright Dipped Oval
(3 Ribs: left; 7 Ribs: right)
3” Knurled
Ladder Rung
Tower Step
Slotted Oval Tubes (left to right):
25-BD-250, 25-BD-255, 25-BD-212, 25-BD-206
Ladder End
Cap: DVLDR
Ladder
Rung
EMS FL1-800-432-2204
(561) 588-4780 - fax
EMS NC1-800-343-8154
(704) 391-2267 - fax
EMS TX1-800-996-6061
(281) 656-2297 - fax
EMS MO1-888-822-6061
(314) 344-3349 - fax
Addt’l Locations: West Palm Beach & Lakeland, FL; Newark, DE; Birmingham, AL; Akron, OH; Van Buren, AR
website: www.EasternMetal.com e-mail: [email protected] version: 08/15/16Eastern Metal Supply
Flat Bar (Sharp Corner)
Flat Bar (Radius Corner)
Marine 04
Additional Sizes and Alloys of Sheet & Plate are available in the Standards Section (pages 05-08)
Polished BDA Architectural Angle x 20’ - Smooth Finish
Stock Code Size in Inches Lgths./Box
25-BD-300 2 x 2 x 1/4 6 (Used to fabricate Brushed Mounting Angle)
Polished BDA Structural Angle x 20’ - Smooth FinishStock Code Size in Inches Lgths./Box
25-BD-303 2 x 2 x 1/4 6
Polished BDA Architectural Tee x 20’ - Smooth FinishStock Code Size in Inches Lgths./Box
25-BD-305 2 x 2 x 1/4 6
Polished BDA Square Tube w/ Radius Corner x 20’Stock Code Size in Inches Lgths./Box
25-BD-310 1 x 1 x 1/8 10
25-BD-315 2 x 2 x 1/8 6
Polished BDA Rectangular Tube w/ Radius Corner x 20’Stock Code Size in Inches Lgths./Box
25-BD-320 1 x 2 x 1/8 8
25-BD-325 1 x 3 x 1/8 6
6463-T6 Polished BDA Flat Bar x 12’ (Sharp Corner)Stock Code Size in Inches Lgths./Box
25-BD-415 1/8 x 4 16
25-BD-400 1/4 x 2 16
25-BD-405 1/4 x 3 10
25-BD-410 1/4 x 4 8
25-BD-417 3/8 x 4 4
25-BD-416 3/8 x 5 4 (used for Outrigger Bases)
Mini Plate - Brushed (320 Grit) and Bright Dipped AnodizedStock Code Size in Inches
25-BRW-415 1/4 x 12” x 48” (Used to make: Brackets, Mounting Plates, Braces & more)
6463-T6 Brushed (320 Grit) BDA Flat Bar x 12’ ( Sharp Corner) Stock Code Size in Inches Lgths./Box
25-BRW-400 1/4 x 2 16
25-BRW-405 1/4 x 3 10
25-BRW-410 1/4 x 4 8
6463-T6 Polished BDA Flat Bar x 12’ ( Radius Corner)Stock Code Size in Inches Lgths./Box
25-BD-420 1/4 x 2 16
25-BD-425 3/8 x 2 10
25-BD-428 1/2 x 1-1/2 12
25-BD-430 1/2 x 2 8
6463-T6 Flat Bar x 12’ Mill Finish ( Sharp Corner)Stock Code Size in Inches Stock Code Size in Inches
10-64-340 1/4 x 2
10-64-345 1/4 x 2-1/2
10-64-350 1/4 x 3
10-64-353 1/4 x 3-1/2
10-64-355 1/4 x 4
10-64-358 1/4 x 4-1/2
Architectural Angle
Architectural Tee
Square Tube w/Radius
Rectangular Tube w/Radius
Structural Angle
10-64-360 1/4 x 5
10-64-365 1/4 x 6
10-64-440 3/8 x 4
10-64-443 3/8 x 5
10-64-445 3/8 x 6
EMS FL1-800-432-2204
(561) 588-4780 - fax
EMS NC1-800-343-8154
(704) 391-2267 - fax
EMS TX1-800-996-6061
(281) 656-2297 - fax
EMS MO1-888-822-6061
(314) 344-3349 - fax
Addt’l Locations: West Palm Beach & Lakeland, FL; Newark, DE; Birmingham, AL; Akron, OH; Van Buren, AR
website: www.EasternMetal.com e-mail: [email protected] version: 12/04/17Eastern Metal Supply
Marine Grade Sheet - 5052 H32 Mill Finish
Federal Specifications QQA 250
Approx.
Stock Code Size in Inches Wt/Sheet
50-5052-4896 .190 x 48 x 96 85.12
50-52-48120 .190 x 48 x 120 106.40
50-03-183 (NC/TX) .190 x 48 x 120 106.40
50-03-185 .190 x 48 x 144 127.68
50-03-186 .190 x 60 x 120 133.00
50-03-187 .190 x 60 x 144 159.60
50-03-191 .250 x 60 x 144 209.40
50-03-300 .250 x 48 x 96 111.68
50-03-188 .250 x 48 x 120 139.60
50-03-190 .250 x 48 x 144 167.52
Marine 05
Outrigger Oval Extrusion x 20’25-BR-211 1-1/4 x 5.516
Bright Dipped Anodized Brushed
4 lengths per box
Awning Track x 16’25-BD-470 Bright Dipped Anodized
Slide Track Channel x 14’
25-BD-475 Bright Dipped Anodized
Gunwale/Gunnel x 32’52-61-672 2.2 x 2 x 1/8
Wt./ Ft: 0.850 6061-T6 Mill Finish
Suggested Applications: Boat Gunwales/Gunnels, Airboat applications
EMS FL1-800-432-2204
(561) 588-4780 - fax
EMS NC1-800-343-8154
(704) 391-2267 - fax
EMS TX1-800-996-6061
(281) 656-2297 - fax
EMS MO1-888-822-6061
(314) 344-3349 - fax
Addt’l Locations: West Palm Beach & Lakeland, FL; Newark, DE; Birmingham, AL; Akron, OH; Van Buren, AR
website: www.EasternMetal.com e-mail: [email protected] version: 05/18/18Eastern Metal Supply
STRAIGHT ROD HOLDERS with Welded Pin (Liners Sold Separately)
8-1/2” 15° with
1-7/8” Oval
Bracket
W00802A-SL
Angle CutBracketSilver
8-1/2” 15° with
1-1/2” Oval
Bracket
WOOST85SL-CT
Angle CutBracketSilver
8-1/2” - No Blade
WOP802-SL
Silver
8-1/2” with 3/8”
T-Top Wedge
for 1” PipeWOT8202-SL
Silver
WOT8202-GL
Gold
10” with 3/8”
T-Top Wedge
for 1” Pipe
TWST10-SL
Silver
8-1/2” with 3/8”
T-Top Wedge for 1”
Pipe
WOT8201-SL Silver
8-1/2” - No BladeWOP801-SL Silver
WOP801-GL Gold
WOP801-M Mill Finish
10” with 3/8” T-Top
Wedge for 1” PipeWOPE1001ET-SL Silver
WOPE1001ET-GL Gold
WOPE1001ET-MF Mill Finish
10” with 3/8”
THICK BladeWOL1001-SL Silver
10” - No BladeWOPE-SL Silver
WOPE-GL Gold
WOPE-MF Mill Finish
WOPE-SLB Brushed Silver
8-1/2” Spinning
Rod HoldersNo Welded Pin; No BracketSRH-3 Silver
SRH-3-MFMill Finish
OFFSHORE
10” Rod
Holder No Blade
2.125” IDWOPEB10-SL
Silver Polished
WOPEBL10-SL
Brushed
WOPEB10-MF
Mill Finish
LINERSRH3 White
LINERSRH4 Black
fitted liner for spinningrod holders
10” - No Blade
TWOPST10-SL
Silver
SWEDGED/FLARED ROD HOLDERS with Welded Pin (Liners Sold Separately)
ROD HOLDER LINERS
Marine 06
INNER CONSOLE OFFSHORE
INNER
CONSOLE
8-1/2” Side
Mount
3” x 4-1/2”
Brushed Pad
Welded On
85SMRH-SL
Silver
NEW!
INNER
CONSOLE
8-1/2” Floor
Mount
3” x 4-1/2”
Brushed Pad
Welded On
85CKRH-SL
Silver
NEW!
T88152-3 White
T88152-4 Black
for 8-1/2" swedgedflared rod holders;UV resistant
T88152-5 White
T88152-6 Black
for 10" swedged/flared rod holders; UV resistant
OFFSHORE
10-1/4” Rod
Holder No Blade
WOP1025-SL
Silver
WOP1025-MF
Mill Finish
NEW!
LINER7for 8-1/2"straight rodholders
T88152-1for 8-1/2" & 10"swedged/flared rod holders
T88152-2for 10" swedgedflared OffshoreSeries
T88152-7for 10-1/4" OffshoreRod Holder Black
EMS FL1-800-432-2204
(561) 588-4780 - fax
EMS NC1-800-343-8154
(704) 391-2267 - fax
EMS TX1-800-996-6061
(281) 656-2297 - fax
EMS MO1-888-822-6061
(314) 344-3349 - fax
Addt’l Locations: West Palm Beach & Lakeland, FL; Newark, DE; Birmingham, AL; Akron, OH; Van Buren, AR
website: www.EasternMetal.com e-mail: [email protected] version: 05/07/18Eastern Metal Supply
Marine 07
Round Marine Pads - (Packaged in pairs)
POLISHED PADS 3-Hole Round Pads - Bright Dipped POLISHED - Standard EdgeStock Code Size in Inches Fastener
D-253 2.5 #10
52-63-6781 2.5 #10 (5/16 threaded center hole)
D-303 3 #10
D-303A 3 1/4
D-303-NCS 3 1/4 (NO countersink on holes)
D-353 3.5 1/4
D-353-NCS 3.5 1/4 (NO countersink on holes)
D-403 4 1/4
D-403-250 4 1/4 (1-1/4 center hole)
D-403-375 4 1/4 (3/8 center hole - NOT threaded)
D-453 4.5 1/4
D-453-NCS 4.5 1/4 (NO countersink on holes)
D-503 5 1/4
3 Hole Round Pads - Bright Dipped POLISHED - “EP” STYLEStock Code Size in Inches Fastener
EP-253 2.5 3/16
EP-303 3 1/4
EP-353 3.5 1/4
EP-403 4 1/4
EP-453 4.5 1/4
4-Hole Round Pads - Bright Dipped POLISHED - Standard EdgeStock Code Size in Inches Fastener
D-304 3 #10
D-354 3.5 1/4
D-404 4 1/4
D-404-NCS 4 1/4 (NO countersink on holes)
D-404-250 4 1/4 (1-1/4 center hole)
D-404OS 4 1/4 (offset)
D-454 4.5 1/4
D-504 5 1/4
SPECIAL ORDER 5 (D-504-250) 1/4 (1-1/4 center hole)
4 Hole Round Pads - Bright Dipped POLISHED - “EP” STYLEStock Code Size in Inches Fastener
EP-354 3.5 1/4
EP-404 4 1/4
EP-404-150 4 1/4 (1-1/2” center hole)
EP-454 4.5 1/4
EP-454-150 4.5 1/4 (1-1/2” center hole)
EP-504 5 1/4
5 Hole Round Pads - Bright Dipped POLISHED - “EP” STYLEStock Code Size in Inches Fastener
EP-505 5 1/4
Custom size pads built to your specs (minimum quantity required)
4” 3-Hole Round Pad
Bright Dipped Polished (D)
D = PolishedB = Brushed
4-Hole Round
Pad - Bright
Dipped
Polished (D)
1-1/4” center
hole
4 Hole Round Pads (EP
Style) Bright Dipped Polished
4 Hole Round Pads
- Offset Bright
Dipped Polished (D)
Round Marine Pads - (Packaged in pairs)
HIGH POLISHED PADS
EMS FL1-800-432-2204
(561) 588-4780 - fax
EMS NC1-800-343-8154
(704) 391-2267 - fax
EMS TX1-800-996-6061
(281) 656-2297 - fax
EMS MO1-888-822-6061
(314) 344-3349 - fax
Addt’l Locations: West Palm Beach & Lakeland, FL; Newark, DE; Birmingham, AL; Akron, OH; Van Buren, AR
website: www.EasternMetal.com e-mail: [email protected] version: 05/18/18Eastern Metal Supply
3-Hole Round Pads - High Polished “EP” Style
Size in
Stock Code Inches Fastener
PEP-253 2.5 #10
PEP-303 3 1/4
PEP-353 3.5 1/4
PEP-403 4 1/4
PEP-403375 4 1/4 (3/8” thick) - NEW!
PEP-403-250 4 1/4 (1-1/4” center hole)
PEP-453-375 4.5 1/4 (3/8” thick)
PEP-45337515 4.5 5/16 (3/8” thick; 1-1/2” center hole) - NEW!
PEP-503 5 1/4
PEP-503-375 5 1/4 (3/8” thick) - NEW!
4-Hole Round Pads - High Polished “EP” Style
Size in
Stock Code Inches Fastener
PEP-404 4 1/4
PEP-404OS 4 1/4 Offset
PEP-454 4.5 1/4
PEP-454-375 4.5 1/4 (3/8” thick) - NEW!
PEP-45437515 4.5 5/16 (3/8” thick; 1-1/2” center hole) - NEW!
PEP-504 5 1/4
PEP-504-375 5 5/16 (3/8” thick) - NEW!
PEP-504-3752 5 5/16 (3/8” thick; 2” center hole) - NEW!
3-Hole Round Pads - Bright Dipped BRUSHED
Standard EdgeStock Code Size in Inches Fastener
B-303A 3 1/4
B-353 3.5 1/4
B-400-TCH 4 3/8 (Threaded Center Hole)
B-403 4 1/4
B-453 4.5 1/4
B-503 5 1/4
4-Hole Round Pads - Bright Dipped BRUSHED
Standard EdgeStock Code Size in Inches Fastener
B-404 4 1/4
B-404OS 4 1/4 (offset)
B-454 4.5 1/4
B-504 5 1/4
3 Hole Round Pads - Bright Dipped BRUSHED
“EP” STYLE - NEW!Stock Code Size in Inches Fastener
EPB-353 3-1/2 1/4
EPB-403 4 1/4
EPB-453 4-1/2 1/4
EPB-503 5 1/4
D = PolishedB = Brushed
Marine 08
4” 4-Hole Round
Pad Bright Dipped
Brushed (B)
5-Hole Round Pads - High Polished “EP” Style
Stock Code Size in Inches Fastener
EP-455 4.5 5/16
EP-505OS 5 5/16 (3/8” thick; offset) - NEW!
PEP-505-375 5 5/16 (3/8” thick) - NEW!
PEP-505OS225 5 5/16 (3/8” thick; offset - NEW!
w/ 2-1/4 center hole)
BRUSHED PADS
4 Hole Round Pads - Bright Dipped BRUSHED
“EP” STYLE - NEW!Stock Code Size in Inches Fastener
EPB-354 3-1/2 1/4
EPB-404 4 1/4
EPB-404OS 4 1/4 (offset)
EPB-454 4-1/2 1/4
EPB-504 5 1/4
Custom size pads built to your specs(minimum quantity required)
EMS FL1-800-432-2204
(561) 588-4780 - fax
EMS NC1-800-343-8154
(704) 391-2267 - fax
EMS TX1-800-996-6061
(281) 656-2297 - fax
EMS MO1-888-822-6061
(314) 344-3349 - fax
Addt’l Locations: West Palm Beach & Lakeland, FL; Newark, DE; Birmingham, AL; Akron, OH; Van Buren, AR
website: www.EasternMetal.com e-mail: [email protected] version: 06/05/17Eastern Metal Supply
Round Marine Pads - (Packaged in pairs)
MILL FINISH PADS 3-Hole Round Pads - MILL FINISH - Standard EdgeStock Code Size in Inches Fastener
52-63-6781-MF 2.5 #10 (5/16 Threaded Center Hole; Mill Finish)
(mates with D-403-375 for folding/pivoting backrest supports)D-303-MF* 3 #10 (Mill Finish)
SPECIAL ORDER 3 (D-303A-MF) 1/4 (Mill Finish)
D-353-MF* 3.5 1/4 (Mill Finish)
SPECIAL ORDER 3.5 (D-353-NCS-MF) 1/4 (Mill Finish - no counter sink)
D-403-MF 4 1/4 (Mill Finish)
D-403-NCS-MF 4 1/4 (Mill Finish - no counter sink)
D-403150-NCS-MF 4 1/4 (Mill Finish - no counter sink; 1-1/2” center hole)
D-453-MF 4.5 1/4 (Mill Finish)
D-453-NCS-MF 4.5 1/4 (Mill Finish - no counter sink)
D-503-MF 5 1/4 (Mill Finish)
4-Hole Round Pads - MILL FINISH - Standard EdgeStock Code Size in Inches Fastener
D-304-MF 3 #10 (Mill Finish)
SPECIAL ORDER 3.5 (D-354-MF) 1/4 (Mill Finish)
D-404-MF 4 1/4 (Mill Finish)
D-404OS-NCS-MF 4 1/4 (Mill Finish; Offset - no counter sink)
D-454-MF 4.5 1/4 (Mill Finish)
D-504-MF 5 1/4 (Mill Finish)
3 Hole Round Disc - MILL FINISH - “EP” STYLEStock Code Size in Inches Fastener
EP-303-MF 3 1/4 (Mill FInish)
EP-353-MF 3.5 1/4 (Mill FInish)
EP-403-MF 4 1/4 (Mill FInish)
4 Hole Round Disc - MILL FINISH - “EP” STYLEStock Code Size in Inches Fastener
EP-404-MF 4 1/4 (Mill FInish)
Center Hole Only - Round Disc - “D” STYLE - NEW!Stock Code Size in Inches Description
D-300-CH 3 x .250 1/4 Center Hole (Polished - 1/4 fastener)
D-400-CH 4 x .250 1/4 Center Hole (Polished - 1/4 fastener)
D-401 (NC) 4 x .250 1/4 Center Hole (Polished - 1/4 fastener)
D-500-CH 5 x .250 1/4 Center Hole (Polished - 1/4 fastener)
D-501 (NC) 5 x .250 1/4 Center Hole (Polished - 1/4 fastener)
11386-12 3 x .375 3/8 Threaded Center Hole (Light Machined)
D-400-TCH-MF 4 x .375 3/8 Threaded Center Hole (Mill Finish)
D-400-TCH 4 x .375 3/8 Threaded Center Hole (Light Machined)
D-400-TCH-HP 4 x .375 3/8 Threaded Center Hole (High Polished)
B-400-TCH 4 x .375 3/8 Threaded Center Hole (Brushed)
D-500-TCH-MF 5 x .375 3/8 Threaded Center Hole (Mill Finish)
D-500-TCH 5 x .375 3/8 Threaded Center Hole (Light Machined)
D-500-TCH-HP 5 x .375 3/8 Threaded Center Hole (High Polished)
Custom size pads built to your specs (minimum quantity required)
Marine 09
D Standard Edge Style
EP Edge Style
4” Center Hole Only
Round Pad High Polished
EMS FL1-800-432-2204
(561) 588-4780 - fax
EMS NC1-800-343-8154
(704) 391-2267 - fax
EMS TX1-800-996-6061
(281) 656-2297 - fax
EMS MO1-888-822-6061
(314) 344-3349 - fax
Addt’l Locations: West Palm Beach & Lakeland, FL; Newark, DE; Birmingham, AL; Akron, OH; Van Buren, AR
website: www.EasternMetal.com e-mail: [email protected] version: 05/18/18Eastern Metal Supply
HIGH POLISHED PADS Rectangular (Oblong/Shape) Pads - HIGH POLISHED - “EP” STYLEStock Code Size in Inches Fastener
PEP-3040-4RC 3 x 4 x .250 4 Holes (1/4”): Radius Corner; NOT Oblong
PEP-3040-4OB 3 x 4 x .250 4 Holes (1/4”): Oblong
PEP-3040-4NCH 3 x 4 x .250 4 Holes (1/4”): no center hole - NEW!
PEP-3045-4OB 3 x 4.375 x .250 4 Holes (1/4”): Oblong
PEP-3045-4OB5 3 x 4.375 x .250 4 Holes (1/4”): Oblong; 1-1/2” Center Hole
RP-4060-425 4 x 6 x .250 4 Holes (1/4”): Oblong; 2-1/2” Center Hole
RP-4060-431 4 x 6 x .250 4 Holes (.312) Oblong: 2-1/2” Center Hole
PEP-4060-4OB 4 x 6 x .250 4 Holes (1/4”): no center hole - NEW!
RC-4060-4OB 4 x 6 x .375 4 Holes (5/16”): Countersunk; 2” Center Hole (6463-T66)
RP-4060-4375 4 x 6 x .375 4 Holes (1/4”): Oblong; 2-1/2” Center Hole
RC-4565-4OB 4.5 x 6.5 x .250 4 Holes (5/16”): NO Countersink; (2-3/8” Center Hole (6463-T66)
RC-4565-4OBN 4.5 x 6.5 x .250 4 Holes (5/16”): NO Countersink (6463-T66)
RC-4565-4OB3 4.5 x 6.5 x .375 4 Holes (1/4”): NO Countersink; 3” Center Hole (6463-T66)
RC-4565-4OB2 4.5 x 6.5 x .375 4 Holes (1/4”): Countersunk; 2-3/8” Center Hole (6463-T66)
RP-5070-4OB 5 x 7 x .375 4 Holes (1/4”): Oblong
RP-5070-6OB 5 x 7 x .375 4 Holes (1/4”): Oblong with 6 Outside Holes
BRUSHED PADS 2-Hole Rectangular (Radius Corner) Pads - Bright Dipped BRUSHEDRB-2040-2 2 x 4 1/4
4-Hole Rectangular (Oblong/Shape) Pads - Bright Dipped BRUSHEDRB-2540-4 2-1/2 x 4 1/4
RB-3040-4OB 3 x 4 1/4
RB-3045-4-MF 3 x 4-1/2 1/4 (Brushed/No Anodize)
RB-3045-4 3 x 4-1/2 1/4
RB-3550-4 3-1/2 x 5 1/4
RB-4060-4 4 x 6 x 3/8 1/4
RB-4060-41OB 4 x 6 x 1/4 1/4
4-Hole Rectangular (Radius Corner) Pads - Bright Dipped BRUSHEDRB-2040-4 2 x 4 1/4
RB-2540-4R 2-1/2 x 4 1/4RB-3040-4 3 x 4 1/4
2 Hole Rect. Pads
Oblong/Shape
4 Hole Rect. Radius Corner Pads Brushed
4 Hole Rect.
Oblong/Shape Pads
Polished
Custom size pads built to your specifications(minimum quantity required)
4 Hole Rect.
Oblong/Shape Pads
Polished (1-1/4 center hole)
4 Hole Rect. Radius Corner Pads
Marine 10
2-Hole Rectangular (Oblong/Shape) Pads
Bright Dipped POLISHED
Stock Code Size in Inches Fastener
RP-1535-2 1-1/2 x 3-1/2 1/4
RP-2040-2 2 x 4 1/4
4-Hole Rectangular (Oblong/Shape) Pads
Bright Dipped POLISHEDSPECIAL ORDER 1-1/2 x 3-1/2 #10 (RP-1535-4)
RP-2040-4 2 x 4 1/4
RP-2540-4 2-1/2 x 4 1/4
RP-3040-4 3 x 4 1/4
RP-3040-4-MF 3 x 4 1/4 (Mill Finish)
RP-3040-41250 3 x 4 1/4 (1-1/4 center hole)
RP-3045-4 3 x 4-1/2 1/4
RP-3550-4 3-1/2 x 5 1/4
RP-4060-4 4 x 6 x 3/8 1/4
RP-4060-41OB 4 x 6 x 1/4 1/4
RP-4060-4OB 4 x 6 x 3/8 5/16
Rectangular Marine Pads - (Packaged in pairs)
POLSHED PADS
4-Hole Rectangular (Radius Corner) Pads
Bright Dipped POLISHEDSize in
Stock Code Inches Fastener
SPECIAL ORDER 2 x 4 1/4 (RP-2040-4RC)
RP-3040-4RC 3 x 4 1/4
RP-3040-4RC-MF 3 x 4 1/4 (Mill Finish)
EMS FL1-800-432-2204
(561) 588-4780 - fax
EMS NC1-800-343-8154
(704) 391-2267 - fax
EMS TX1-800-996-6061
(281) 656-2297 - fax
EMS MO1-888-822-6061
(314) 344-3349 - fax
Addt’l Locations: West Palm Beach & Lakeland, FL; Newark, DE; Birmingham, AL; Akron, OH; Van Buren, AR
website: www.EasternMetal.com e-mail: [email protected] version: 05/18/18Eastern Metal Supply
Miscellaneous Marine Pads - (Packaged in pairs)
2-Hole Oval PadsStock Code Size in Inches Fastener
OP-2035-2 2 x 3.5 (brushed) 1/4
OP-2035-2P 2 x 3.5 (polished) 1/4
OP-2035-2P-MF 2 x 3.5 (mill finish) 1/4
OP-2540-2B 2.5 x 4 (brushed) 1/4
OP-2540-2P 2.5 x 4 (polished) 1/4
OP-2540-2P-MF 2.5 x 4 (mill finish) 1/4
Tear Drop Pads - Bright Dipped - PolishedStock Code Size in Inches Fastener
TD-3040 2 x 3 (with countersunk hole)
Triangular Heart PadsStock Code Size in Inches Fastener
TP-353 3-1/2 1/4
HP-3040-3 3 x 4 (Polished) 1/4
Diamond PadsStock Code Size in Inches Fastener
DP-2035-3 2 x 3-1/2 (Polished) 1/4
DB-2035-3 2 x 3-1/2 (Brushed) 1/4
DB-2045-3 2 x 4-1/4 (Brushed) 1/4
Square PadStock Code Size in Inches Fastener
SB-222 2 x 1/4 3/16
Outrigger Hard Top Pad Stock Code Description
LHOP-875 Outrigger Hard Top Pad
Pad for Windshield Guard Stock Code Description
EPWP-150-2 (NC) 1-1/2 x 3/8 Round Pad (for 3/4” Pipe; 5/16 - 18 threaded center hole)
Antenna Ratchet Mounting PadsStock Code Description
AP-320 3 x 2 x 1/4
AP-4 4 x 4x 1/4
Custom size pads built to your specs (minimum quantity required)
Triangular Heart
Pads
Oval Pads
Tear Drop Pads
Square Pad
Heart Pad
Diamond Pads
D = PolishedB = Brushed
Marine 11
Outrigger
Hard Top Pad
Windshield
Pad
Antenna Ratchet
Mounting Pads
EMS FL1-800-432-2204
(561) 588-4780 - fax
EMS NC1-800-343-8154
(704) 391-2267 - fax
EMS TX1-800-996-6061
(281) 656-2297 - fax
EMS MO1-888-822-6061
(314) 344-3349 - fax
Addt’l Locations: West Palm Beach & Lakeland, FL; Newark, DE; Birmingham, AL; Akron, OH; Van Buren, AR
website: www.EasternMetal.com e-mail: [email protected] version: 08/09/16Eastern Metal Supply
Special Marine PadsRound Pads - Bright Dipped POLISHED - Standard EdgeStock Code Size (Inches) Description Fastener
D-300-CH 3 x .250 Contains center hole only; countersunk ¼
11386-12 3 x .375 Contains center hole only (threaded 3/8-16); countersunk ¼
D-400-CH 4 x .250 Contains center hole only; countersunk ¼
D-500-CH 5 x .250 Contains center hole only; countersunk ¼
Round Pads - Bright Dipped BRUSHED - Standard EdgeStock Code Size (Inches) Description
EB-250-CH 2.5 x .250 Contains NON-Threaded Center Hole Only (3/16”): NO Countersink (6463-T66)
EB-300-CH 3 x .250 Contains NON-Threaded Center Hole Only (3/16”): NO Countersink (6463-T66)
B-400-TCH 4 x .375 Contains NON-Threaded Center Hole Only (5/16”): NO Countersink (6463-T66)
57678-14A 4.5 x .375 3 Holes (5/16”): Countersunk (6061-T6)
57678-13A 6 x .250 3 Holes (5/16”): NO Countersink; NO Center Hole (6061-T6)
57678-11A 6 x .375 3 Holes (5/16”): Countersunk; 2” Center hole (6061-T6)
Round Pads - MILL FINISH - Standard EdgeStock Code Size (Inches) Description
57678-15M 4.5 x .250 3 Holes (5/16”): NO Countersink (6463-T66)
57678-12M 6 x .250 3 Holes (5/16”): NO Countersink; 2” Center Hole (6061-T6) - Backing Plate
Rectangular (Oblong/Shape) Pads - Bright Dipped BRUSHEDStock Code Size (Inches) Description
57678-4A 4 x 6 x .375 4 Holes (5/16”): NO Countersink (6463-T66)
57678-5A 4 x 6 x .375 4 Holes (5/16”): Countersunk (6463-T66)
SPECIAL ORDER 4 x 6 x .375 4 Holes (5/16”): NO Countersink; 2” Center Hole 6463-T66 - (57678-6A)
SPECIAL ORDER 4 x 6 x .375 4 Holes (5/16”): Countersunk; 2” Center Hole 6463-T66 - (57678-7A)
57678-2AA 4 x 12 x .375 6 Holes (5/16”): NO Countersink (6463-T66)
57678-8A 4.5 x 6 x .375 4 Holes (5/16”): Countersunk (6061-T6)
Rectangular (Oblong/Shape) Pads - 6463-T66 - MILL FINISHStock Code Size (Inches) Description
57678-9M 4 x 6 x .250 4 Holes (5/16”) and 2” Center Hole: NO Countersink
SPECIAL ORDER 4 x 6 x .375 4 Holes (5/16”): NO Countersink - (57678-4M)
SPECIAL ORDER 4 x 12 x .375 6 Holes (5/16”): NO Countersink; 2 - 2” Center Holes - (57678-1M)
SPECIAL ORDER 4.5 x 6 x .250 4 Holes (5/16”): NO Countersink; 2 - 2” Center Holes - (57678-10)
Poling Platform Mounting Pad - Bright Dipped - POLISHED
Stock Code Size (Inches) Description
PPMP 3 x 10 x .25 5 Holes
4” Round Hard Top Mounting Pad - Bright Dipped - POLISHEDStock Code Size (Inches) Description
4RHTMP 4 x .375 (3/8” thread) Sold in set of 2 pads; Hardware NOT included.
Hard Top Mounting Pad - Bright Dipped - POLISHED
Stock Code Size (Inches) Description
HTMP 4 x 12.875 x .375 8 Holes
Leaning Post Pad - Bright Dipped - POLISHED
Stock Code Size (Inches) Description
LPP-21625 2 x 16 6 Holes
Polling Platform
Mounting Pad
Hard Top
Mounting Pad
Leaning
Post Pad
57678-4M
57678-1M
57678-7A
57678-8A
57678-11A
57678-2AA
Marine 12
4” Round Hard Top
Mounting Pad
(2 pads)
EMS FL1-800-432-2204
(561) 588-4780 - fax
EMS NC1-800-343-8154
(704) 391-2267 - fax
EMS TX1-800-996-6061
(281) 656-2297 - fax
EMS MO1-888-822-6061
(314) 344-3349 - fax
Addt’l Locations: West Palm Beach & Lakeland, FL; Newark, DE; Birmingham, AL; Akron, OH; Van Buren, AR
website: www.EasternMetal.com e-mail: [email protected] version: 02/06/18Eastern Metal Supply
Marine Hardware and Accessories
Hard Top Bushings and Washers - Powder Coated Marine White
Custom size Bushings & Washers available/minimum quantities applyStock Code Description
HTP-1 1-5/8 x 1-1/2 x 1 Hard Top Bushing
HTW-1 1-1/8 x 1/4 Hard Top Washer
HTW-2 (NC) 2-1/2 x 3/8 Hard Top Washer
Rod ButtRODG1 Rod Butt for 1” pipe Polished
Stand OffSO-1250 1-1/4" Stand Off Polished BDA
Cup HoldersStock Code Description
PCHE-BP Black Plastic Cup Insert (w/ Stainless Ring on top)
Mates with PCHEPCHE-SS Stainless Steel Cup Insert
Mates with PCHET88586 Large Stainless Cup Holder – Fits Yeti Cups - NEW!
Mates with T88586-1
PCHE Cup Holder Mounting Ring (Polished and Anodized)
Accepts PCHE-BP and PCHE-SST88586-1 BDA Large Cup Holder Ring - NEW!
Accepts T88586
Folding/Pivoting Back RestStock Code Description
FBRA-KIT Folding/Pivoting Back Rest Assembly
FBRA-KIT-BLK Folding/Pivoting Back Rest Assembly (Black)
PBRP-404 4" 4 Hole Round Pad; WHITE(w/ 3/8” counter sunk center hole white plastic)
SPECIAL ORDER 4" 4 Hole Round Pad; BLACK
(PBRP-404-BK) (w/ 3/8” counter sunk center hole black plastic)
50045 3/8" x 1" notched thread screw
BRP-250 2-1/2" Round Pad
(w/ 3/8” threaded center hole polished & anodized)
FBRA-SLEEVE Folding Back Rest Sleeve for 1”
Custom size pads built to your specifications(minimum quantity required)
Hard Top Bushings
and Washers
left-right: Folding/Pivoting Back Rest Assembly;
FBRA-KIT; FBRA-KIT-BLK
left to right: PBRP-404; 50045; BRP-250
Top: PCHE-BP, PCHE-SS, T88586
Bottom: PCHE, T88586-1
Rod Butt
Marine 13
FBRA-SLEEVE
(shown with 1” pipe inserted)
Stand Off
Marine Hardware and AccessoriesBreakaway Pins
Stock Code Size In Inches
BAP-750 3/4
BAP-1000 1
BAP-1250 1-1/4
BAP-1500 1-1/2
BAP-2000 2
BAP-2500 2-1/2
Pivoting Breakaway PinStock Code Size In Inches
PIVPIN-750 Pivoting breakaway pin for ¾” pipe
Threaded Antenna Boss
Stock Code Size In Inches
TAB-1 3.5 (1”-14 Thread / .500 Through Hole Size)
Threaded Antenna MountStock Code Size In Inches
TAM-1 4” (¾” I.D. and 1” of threads)
End Caps
Stock Code Size In Inches
APC-750 3/4
APC-100 1
APC-125 1-1/4
APC-150 1-1/2
APC-200 2
Plug Boss52-63-44068 3/4” Plug Boss for ¾ sch 40 pipe
1/4 -20 threaded center hole; for attachment of grab rails
Hand Rail Boss - Bright Dip Anodized
Stock Code Size In Inches
HRB-1 1 x 1-7/8
Brushed Mounting Angles (2 x 2 x 1/4)Stock Code Size In Inches Fastener
MA-151 2 (1 hole) 1/4
MA-402 4 (2 hole) 1/4
MA-603 6 (3 hole) 1/4
MA-804 8 (4 hole) 1/4
25-BD-300 2 x 2 x 1/4 Arch Angle x 20’ 6 pcs/box
Used to fabricate Brushed Mounting Angle
Polished Mounting Angles (2 x 2 x 1/4)Stock Code Size In Inches Fastener
PMA-402 4 (2 hole) 1/4
PMA-603 6 (3 hole) 1/4
PMA-804 8 (4 hole) 1/4
PMA-255 1-3/8” x 2” x 5-1/2” (4 hole) 1/4
EMS FL1-800-432-2204
(561) 588-4780 - fax
EMS NC1-800-343-8154
(704) 391-2267 - fax
EMS TX1-800-996-6061
(281) 656-2297 - fax
EMS MO1-888-822-6061
(314) 344-3349 - fax
Addt’l Locations: West Palm Beach & Lakeland, FL; Newark, DE; Birmingham, AL; Akron, OH; Van Buren, AR
website: www.EasternMetal.com e-mail: [email protected] version: 01/16/18Eastern Metal Supply
Breakaway Pins
Threaded
Antenna Boss
End Caps
Mounting Angles
Hand Rail Boss
Pivoting Breakaway Pin
Threaded
Antenna Mount
3/4” Plug Boss; Inserted into pipe
Marine 14
PMA-255
Mounting Angle
EMS FL1-800-432-2204
(561) 588-4780 - fax
EMS NC1-800-343-8154
(704) 391-2267 - fax
EMS TX1-800-996-6061
(281) 656-2297 - fax
EMS MO1-888-822-6061
(314) 344-3349 - fax
Addt’l Locations: West Palm Beach & Lakeland, FL; Newark, DE; Birmingham, AL; Akron, OH; Van Buren, AR
website: www.EasternMetal.com e-mail: [email protected] version: 03/09/17Eastern Metal Supply
Marine Hardware and Accessories
Grip Rail - NEW!Stock Code Description Stock Code Description
GR-12 12" Polished & Anodized GRM-12 12" Mill Finish
GR-14 14" Polished & Anodized GRM-14 14" Mill Finish
GR-18 18" Polished & Anodized GRM-18 18" Mill Finish
GR-24 24" Polished & Anodized GRM-24 24" Mill Finish
GR-36 36" Polished & Anodized GRM-36 36" Mill Finish
Bow Rail ComponentsStock Code Description Fastener
BREC Bow Rail End Cap for ¾” Pipe; 2.25” High 1/4
BRSS Bow Rail Mid Span Support for ¾” Pipe; 2.25” High 1/4
GREC Grip Rail End Cap for ¾” pipe; 2.625” High 1/4
GRMS Grip Rail Mid Span Support for ¾” pipe; 2.625” High 1/4
Sleeves - Outside BDA Polished
Stock Code Description
SLV-1-6 1 x 6
SLV-1.250-6 1-1/4 x 6
SLV-1.25-8.5 1-1/4 x 8-1/2
SLV-1.50-6 1-1/2 x 6
SLV-1.50-8.5 1-1/2 x 8-1/2
SPECIAL ORDER 1-1/2 x 10 - (SLV-1.50-10)SLV-2-6 2 x 6
SLV-2-8 2 x 8
SLV-2-10 2 x 10
SLV-2-12 2 x 12
Sleeves - Outside Mill FinishStock Code Description
SLV-1.50-6MF 1-1/2 x 6
SLV-1.50-10MF 1-1/2 x 10
SPECIAL ORDER 2 x 8 - (SLV-2-8MF)SLV-2-10MF 2 x 10
SLV-2-12MF 2 x 12
Pipe Aligners
Stock Code Description
PA-0752 3/4
PA-1002 1
PA-1253 1-1/4
PA-1505 1-1/2
PA-2005 2
Sleeves - Outside
Pipe Aligners
Left: Bow Rail
End Cap
Right: Bow Rail
Mid Span Support
Marine 15
Grip Rails
EMS FL1-800-432-2204
(561) 588-4780 - fax
EMS NC1-800-343-8154
(704) 391-2267 - fax
EMS TX1-800-996-6061
(281) 656-2297 - fax
EMS MO1-888-822-6061
(314) 344-3349 - fax
Addt’l Locations: West Palm Beach & Lakeland, FL; Newark, DE; Birmingham, AL; Akron, OH; Van Buren, AR
website: www.EasternMetal.com e-mail: [email protected] version: 01/16/18Eastern Metal Supply
Marine Hardware & Accessories
Folding Foot Rest Hardware
Stock Code Description
FR-ANGLE Flat Surface Mount (Sold in Sets, Left and Right)
Each side includes: 1) 2 x 2 x 3 Hinge Block; 1) 5/16 Bolt; 2) Delrin Washers; 1) 1" Female PinBOFR Bolt On Foot Rest Hardware
Sold in sets (1 Right & 1 Left) Includes (2) 1” Male Pins (1) 5/16” Bolt
FRP-WELD-ON Weld On Blade Mount (polished blade) (drops past horizontal)
includes:1) 2 x 3 Hinge Block; 1) 5/16 Bolt; 2) Delrin Washers; 1) 1" Female PinFR-WELD-ON Weld On Blade Mount (brushed blade) (drops past horizontal)
includes:1) 2 x 3 Hinge Block; 1) 5/16 Bolt; 2) Delrin Washers; 1) 1" Female PinFR-WELD-ON-90 Weld On Blade Mount (brushed blade) (drops to horizontal)
includes:1) 2 x 2-1/2 Hinge Block; 1) 5/16 Bolt; 2) Delrin Washers; 1) 1" Female Pin
Ear MountsStock Code Description
EM-750 3/4” with 1/4” Hole
EM-100 1” with 5/16” Hole
EM-200 1-1/4 or 1-1/2” with 3/8” Hole
Folding Bench Seat HardwareStock Code Description
FBSH-T Folding Bench Seat Hardwareincludes:1) 1/4 x 2 x 2 T-Stock Hinge; 1) 1/4" Socket Cap Screw; 2) Delrin Washers; 1) 3/4" Female Pin; 1) Retaining Clip; 1) Retaining Clip Mount & Screw
FBSH-Angle Mounting AngleSold in pairs with 1” female pin, right & leftfor surface mounting Seat to Transom, etc.
Hinge Bracket
Stock Code Blade Thickness
HB-250 1/4”
HB-375 3/8”
HB-500 1/2”
HB3L 3 Leg Bracket: 1/4” Oustide Legs & 3/8” Inside Leg
Alignment PinsStock Code Size Slot Size (Through Hole Size)
ALP-100 1" 1/2"
ALP-125 1-1/4" 3/4"
ALP-150 1-1/2" 3/4"
ALP-200 2" 1"
ALP-250 2-1/2” 1-3/4”
FR-Angle
left: FR-Weld-On; right: FR-Weld-On-90
FBSH-T
Hinge Bracket
FBSH-Angle
Alignment Pins
BOFR
Ear Mounts
3 Leg Bracket
Marine 16
EMS FL1-800-432-2204
(561) 588-4780 - fax
EMS NC1-800-343-8154
(704) 391-2267 - fax
EMS TX1-800-996-6061
(281) 656-2297 - fax
EMS MO1-888-822-6061
(314) 344-3349 - fax
Addt’l Locations: West Palm Beach & Lakeland, FL; Newark, DE; Birmingham, AL; Akron, OH; Van Buren, AR
website: www.EasternMetal.com e-mail: [email protected] version: 05/14/18Eastern Metal Supply
Marine Hardware & Accessories
Female PinsStock Code Size In Inches Slot Size Fastener
FP-75375 3/4 3/8 1/4* (Wide Slot)
FP-100375 1 3/8 5/16
FP-100500 1 1/2 5/16* (Wide Slot)
FP-125500 1-1/4 1/2 3/8
FP-125500WS 1-1/4 5/8 3/8* (Wide Slot)
FP-150500 1-1/2 1/2 3/8
FP-150500WS 1-1/2 .630 3/8* (Wide Slot)
FP-200750 2 3/4 1/2* (Wide Slot)
Female Oval PinFOP-100500 1 1/2 5/16
Mates with 1 x 1-1/2” Oval Tube (52-63-6354, 25-BD-200, 25-BR-200)
Bolts included with all Female Pins
*These Pins are supplied with Washers
Male PinsStock Code Size In Inches Fastener
MP-750 3/4 1/4
MP-1000 1 5/16
MP-1250 1-1/4 3/8
MP-1500 1-1/2 3/8
MP-2000 2 1/2
Quick Release Pin
QRP-1 1” Quick Release Pin; for 2 locking positions 0o and 90o
Half PinsStock Code Size In Inches Fastener
HP-750 3/4 3/8
HP-1000 1 3/8
HP-1250 1-1/4 3/8
HP-1500 1-1/2 3/8
Tower BossStock Code Size In Inches Fastener
TB-750 3/4 x 1 1/4”-20 (one end)
TB-1312-10 1-5/16 x 1 3/8”-16 (one end)
TB-1312-15 1-5/16 x 1-1/2 3/8”-16 (one end)
TB-1625-20 1-5/8 x 2 3/8”-16 (one end)
SPECIAL ORDER TB-1875-20 1-7/8 x 2 3/8”-16 (one end)
Threaded KnobStock Code Description
BK-KNOB Black Threaded Knob 3/8”-16 (one end)
For Tower Boss, Femal Pin Connections
Female Pins
Tower Boss
Half Pins
Male Pins
Female & Male Pin shown connected;Not sold together; sold individually
Female Oval Pin
Quick Releae Pin
Threaded Knob
Marine 17
Outriggers & Accessories
Tigershark III - Top Mount Outrigger BaseStock Code Description
T88805 Manual Top Mount designed for Hard & Soft Tops
· Features a bottom mounted crank assembly for ease of deployment
· Simply push up on the handle to release the gears and turn 14 to 17 times to
complete deployment of your outrigger
· Then simply pull handle down to lock into place
· Simultaneous up and out motion eliminates climbing the gunnels to adjust
your outriggers
· Fits all prepared T-Tops with 3" mounting hole and fits Hard Tops up to 2-1/2" thick
· Allows for the lowest profile under your T-Top or Hard Top of any top mount outrigger holder in the industry
Tigress Track Telescoping Outrigger PolesPart Length Base OD Color
T88904 15' HD 1-1/2" Black/Gold
T88905 15' HD 1-1/2" Silver/Black
T88907-2 15' HD 1-1/2" Silver/Silver
T88908 18' HD 1-1/2" Black/Gold
T88909 18' HD 1-1/2" Silver/Black
T88911-2 18’ HD 1-1/2” Silver/Silver
T88976 18' 1-1/2" Black/Black (Carbon Fiber)
Ask about Tigress Rigging Kits!
Outrigger Mounting Plates* - BDA Polished 6463-T6Stock Code Description
OMP-7 3/8 x 5” x 7” (3-1/8” diameter hole)
25-BD-416 3/8 x 5” x 12’ 4 lengths/box
Used to fabricate Outrigger Bases
Outrigger Hard Top Pad Stock Code Description
LHOP-875 Outrigger Hard Top Pad
Outrigger Oval Tube* - BDA Brushed 6463-T6Stock Code Description
OOMP-20 Brushed Oval Outrigger Mount Plate x 20”
OOMP-30 Brushed Oval Outrigger Mount Plate x 30”
25-BR-211 1-1/4 x 5.516 Brushed Oval Tube x 20’
Used to fabricate Oval Tube Mounting Plates
EMS FL1-800-432-2204
(561) 588-4780 - fax
EMS NC1-800-343-8154
(704) 391-2267 - fax
EMS TX1-800-996-6061
(281) 656-2297 - fax
EMS MO1-888-822-6061
(314) 344-3349 - fax
Addt’l Locations: West Palm Beach & Lakeland, FL; Newark, DE; Birmingham, AL; Akron, OH; Van Buren, AR
website: www.EasternMetal.com e-mail: [email protected] version: 11/29/17Eastern Metal Supply
Marine 18
Outrigger Mounting Plates
Oval Tube
Outrigger
Hard Top Pad
Oval Tube Mounting Plate
Tigershark III
Fiberglass Electronics Box
EMSLEB Large, Black Face
30” W x 17” D x 11” H½” Door & Frame, 1 Gas Shock, Stainless Lock
Upper Tower Control Box
TWRBOX
28” W x 11-1/2” H x 20” D
GemLux Latch & Friction Hinges/Cored
Upper Control Station
UCS White Fiberglass
25-1/2” W x 15-1/2” D x 13” H
Fiberglass Electronics Box
EB32W (NC) Large, Black Face32" W x 20" D x 10" HCrowned top - White Exterior Stainless Steel Latch and Friction Hinges. Gasket ondoor for a water resistant box.
Also Available as Special Order (NC):
Size: 24” W and 28” W - All sizes can be made with White or Off White Exteriors
Radius Back Fiberglass Electronics Box
SPECIAL ORDER 24EBOX-R
24” W x 15” D x 12” H
White Fiberglass, GemLux Latch and Friction Hinges, cored
EMS FL1-800-432-2204
(561) 588-4780 - fax
EMS NC1-800-343-8154
(704) 391-2267 - fax
EMS TX1-800-996-6061
(281) 656-2297 - fax
EMS MO1-888-822-6061
(314) 344-3349 - fax
Addt’l Locations: West Palm Beach & Lakeland, FL; Newark, DE; Birmingham, AL; Akron, OH; Van Buren, AR
website: www.EasternMetal.com e-mail: [email protected] version: 06/13/18Eastern Metal Supply
Marine Hardware & Accessories: Boxes & Fiberglass Products
Marine 19
Fiberglass Poling Platform Cap
PPFC Fiberglass Cap (White)
24" W x 42" L x 1-1/2" W Lip
Leaning Post Tray
7000TRAY
White Fiberglass
33” W x 9” D x 6-3/4” H
Fiberglass Electronics Box
EMSSEB Small, Black Face
24” W x 15” D x 10” H½” Door & Frame, 1 Gas Shock, Stainless Lock
EMS FL1-800-432-2204
(561) 588-4780 - fax
EMS NC1-800-343-8154
(704) 391-2267 - fax
EMS TX1-800-996-6061
(281) 656-2297 - fax
EMS MO1-888-822-6061
(314) 344-3349 - fax
Addt’l Locations: West Palm Beach & Lakeland, FL; Newark, DE; Birmingham, AL; Akron, OH; Van Buren, AR
website: www.EasternMetal.com e-mail: [email protected] version: 04/30/18Eastern Metal Supply
360 Adjustable* & Fixed Anchor
Navigation Lights by HellaGreat for T-Tops, Towers, Poling Platforms62255BLACK 8” Fold Down (Black)
62255WHITE 8” Fold Down (White)
62254BLACK 8” Fixed Mount (Black)
62253BLACK 4” Fixed Mount (Black)
*Can be mounted vertically or Horizontally
Hella Marine LED Anchor Lights360° NaviLED Anchor Lamp959910-727 12” Fold Down White
959910-627 12” Fold Down Black
360° NaviLED Light959731 24” Long; White Base
959631 24” Long; Black Base
Lumitec LED
Spreader/Flood Light
SPECIAL ORDER101040 White/Bracket Mount
Soft Start & Dimmable
Lumitec LED Dual Color
Spread/ Flood LightDimmable, White/Bracket Mount
SPECIAL ORDER 101102
LED White/Blue
SPECIAL ORDER 101103
LED White/Red
Marine Hardware & Accessories - Lights
Lumitec LED Rail Lights
LED T-Top/Utility Light Mini Rail2101079 6" Blue Output
SPECIAL ORDER 1010786" White Output
LED T-Top/Utility Light Rail2SPECIAL ORDER 101243
12” - 3 Color
White, Red, Blue
Each color can come on independent of others; Only white is dimmable
Fluorescent Light Kits
FL Fluorescent Light
FLH Fluorescent Light
Housing
Round T-Top LED Lights
LED-WR
White & Red lights with
silver aluminum case x 20”
Lumitec LED Underwater
Lights
SPECIAL ORDER101057 Light Green Output
01058 2 Color Output
(White & Blue)
Marine 20
Halogen Docking Lights by Beacon
9-96-CMW - closeout! Small White
9-96-CMB - closeout! Small Black
Spreader/Flood LightTT402 White/Flush Mount
Spreader/Flood LightTT406 White/Bracket Mount