10
14 800.854.2235 carvin.com The LS1002 is a multipurpose, 2-way loudspeaker system to be used as a main, fill, or monitor system in any type of sound reinforcement applica- tion.The LS1002 features 10” driver for low and mid frequency reproduc- tion and a titanium high frequency driver that extends the frequency response to 20 kHz. LS1002 TECHNICAL SPECS Frequency Resp: +/-3dB 85Hz - 20kHz (72Hz - 10dB) Power Capacity: 200 W continuous, 400 W peak Sensitivity: 98 dB SPL, 1W / 1M (124 dB MAX) Nominal directivity: 60 degrees HxV Nominal Impedance: 8 Ohms Dimensions: 12.5”W x 11.5”D x 18”H Weight: 21 lbs. LS1002 10” 300W 2-WAY $ 199 99 $ 169 99 List $295 The LS1502 is a multipurpose, 2-way main / wedge monitor system. The LS1502 is equally at home as a mains loudspeaker system where maximum cover- age with minimal enclosures is needed. The LS1502 features a high efficiency 15” driver and a Titanium high frequency driver mounted to a 90 deg. conical waveguide for maximum high frequency dispersion. See LS1502A power specs above Frequency Resp: +/-3dB 53Hz - 18kHz (47Hz - 10dB) Power Capacity: 400 W continuous, 800 W peak Sensitivity: 100 dB SPL, 1W / 1M (129 dB MAX) Nominal Directivity: 90 degrees HxV Nominal Impedance: 8 Ohms Dimensions: 18.25”W x 14”D x 27.25”H Weight: 44 lbs The LS1202 is a multipurpose,2-way loudspeaker system to be used as a main, fill, or monitor system. The enclosure features a high efficiency 12” driver and a Titanium high frequency driver mounted to a 90 deg. conical waveguide for maximum high frequency dispersion. Frequency Resp: +/-3dB 76Hz - 20kHz (70Hz - 10dB) Power Capacity: 300 W continuous, 600 W peak Sensitivity: 97 dB SPL, 1 Watt @ 1 meter Nominal Directivity: 90 degrees HxV Nominal Impedance: 8 Ohms Dimensions: 15.25”W x 13”D x 24.25”H Weight: 33 lbs. LS1202 TECHNICAL SPECS LS SERIES HIGH PERFORMANCE Loudspeakers LS1502 LS1503 LS1202 LS1802 LS1002 LS2153 LS1801 LS1523 Designed for musicians and mobile DJs, Carvin’s LS Series loudspeak- ers are designed for today’s concert needs. Consisting of eight models, the LS Series reaches sonic heights with high performance componants together with multi-ply plywood enclosures & crossover designs. APS SPECS: FREQ. RESPONSE: 20 to 20kHz, THD less than .05% @ 90%, .1% at full power, SLEW RATE: 50V/μs, ACTIVE EQ: ± 6 dB @ 100 Hz, 100 Hz to 5 kHz mid sweep, 10kHz, EQ bypass switch, (SUB WOOFER: 24dB/Octave @ 80 & 120 Hz) • Relay muting and Speaker Guard™ protection, Peak and protection & power on indicators, On-Off power switch, Power Req. 120VAC 60 Hz . 240 AC/50Hz model available Carvin’s optional LS Active Powered Systems take the guesswork out of selecting the ideal power source to drive your loudspeakers. With bi- amped and tri-amped models designed to handle the most demanding applications, APS amplifiers are perfectly mated with four Carvin loud- speakers—the LS1502A, LS1503A, and LS1523A—creating studio quality powered systems. There’s even one APS power pack created specifi- cally to generate the bone shaking impact of our LS1801A subwoofer. APS systems make setup and operation easier with less gear to haul. Connect your mixer directly to these systems and you’re ready to rock! LS1202 12” 300W 2-WAY $ 299 99 $ 229 99 List $395 LS1502 15” 2-WAY PASSIVE $ 329 99 $ 249 99 List $495 LS1502A 15” 350W BI-AMPED $ 469 99 $ 399 99 List $795 Main/Monitor Package 1002-2 • 2LS1002 • 2 PRO50S $ 339 99 save $ 50 1002-4 • 4 LS1002 • 2 PRO50S, PRO25S $ 659 99 save $ 108 Main/Monitor Package 1202-2 • 2 LS1202 • 2 PRO50S $ 459 99 save $ 50 1202-4 •4 LS1202 • 2 PRO50S, PRO25S $ 899 99 save $ 108 Passive Monitor Package 1502-2 • 2 LS1502 • 2 PRO50S $499 99 save $50 1502-4 • 4 LS1502 • 2 PRO50S, PRO25S $949 99 save $130 “Active” Monitor Package 1502A-2 • 2 LS1502A • 2 PRO50XLR, AD70 $749 99 save $132 1502A-4 • 4 LS1502A • 2 PRO25XLR, PRO50XLR, AD70 $1499 99 save $190 LS1502A 2-WAY BI-AMPED 350w RMS (Hi Freq: 50w @ 16 Ω, Lo Freq.300w @ 8Ω LS1503A 3-WAY TRI-AMPED 425w RMS (Hi Freq: 50w @ 16Ω, Mid Freq: 75w @ 16 Ω, Lo Freq. 300w @ 8 Ω) LS1523A 3-WAY TRI-AMPED 900w RMS (Hi Freq: 80w @ 16 Ω, Mid Freq: 120w @ 8Ω, Lo Freq. 700w @ 4 Ω) LS1801A SUB WOOFER 700w RMS @ 4 Ω Only 33 Lbs. Only 44 Lbs. APS ACTIVE CONTROLS • 3-band EQ, parametric mid sweep • EQ in/out switch • XLR through 3 Year Limited Warranty MADE IN USA MADE IN USA $5/mo. $7/mo. $10/mo. $20/mo. $14/mo. $27/mo. $14/mo. $27/mo. $14/mo. $29/mo. $22/mo. $45/mo. Only 21 Lbs. FREE SHIPPING

HIGH PERFORMANCE Loudspeakers Designed for ... for maximum high frequency dispersion. See LS1502A power specs above Frequency Resp: +/-3dB 53Hz - 18kHz (47Hz - 10dB)

Embed Size (px)

Citation preview

14 800.854.2235 carvin.com

The LS1002 is a multipurpose, 2-way loudspeaker system to be used as a main, fill, or monitor system in any type of sound reinforcement applica-tion.The LS1002 features 10” driver for low and mid frequency reproduc-tion and a titanium high frequency driver that extends the frequency response to 20 kHz.

LS1002 TECHNICAL SPECSFrequency Resp: +/-3dB 85Hz - 20kHz (72Hz - 10dB)Power Capacity: 200 W continuous, 400 W peakSensitivity: 98 dB SPL, 1W / 1M (124 dB MAX)Nominal directivity: 60 degrees HxVNominal Impedance: 8 OhmsDimensions: 12.5”W x 11.5”D x 18”HWeight: 21 lbs.

LS1002 10” 300W 2-WAY $19999

$16999 List $295

The LS1502 is a multipurpose, 2-way main / wedge monitor system. The LS1502 is equally at home as a mains loudspeaker system where maximum cover-age with minimal enclosures is needed. The LS1502 features a high efficiency 15” driver and a Titanium high frequency driver mounted to a 90 deg. conical waveguide for maximum high frequency dispersion.

See LS1502A power specs aboveFrequency Resp: +/-3dB 53Hz - 18kHz (47Hz - 10dB)Power Capacity: 400 W continuous, 800 W peak Sensitivity: 100 dB SPL, 1W / 1M (129 dB MAX)Nominal Directivity: 90 degrees HxVNominal Impedance: 8 OhmsDimensions: 18.25”W x 14”D x 27.25”HWeight: 44 lbs

The LS1202 is a multipurpose,2-way loudspeaker system to be used as a main, fill, or monitor system. The enclosure features a high efficiency 12” driver and a Titanium high frequency driver mounted to a 90 deg. conical waveguide for maximum high frequency dispersion.

Frequency Resp: +/-3dB 76Hz - 20kHz (70Hz - 10dB)Power Capacity: 300 W continuous, 600 W peak Sensitivity: 97 dB SPL, 1 Watt @ 1 meterNominal Directivity: 90 degrees HxVNominal Impedance: 8 OhmsDimensions: 15.25”W x 13”D x 24.25”HWeight: 33 lbs.

LS1202 TECHNICAL SPECS

LS SERIESHIGH PERFORMANCE Loudspeakers

LS1502

LS1503LS1202

LS1802

LS1002

LS2153LS1801

LS1523

Designed for musicians and mobile DJs, Carvin’s LS Series loudspeak-ers are designed for today’s concert needs. Consisting of eight models, the LS Series reaches sonic heights with high performance componants together with multi-ply plywood enclosures & crossover designs.

APS SPECS: FREQ. RESPONSE: 20 to 20kHz, THD less than .05% @ 90%, .1% at full power, SLEW RATE: 50V/µs, ACTIVE EQ: ± 6 dB @ 100 Hz, 100 Hz to 5 kHz mid sweep, 10kHz, EQ bypass switch, (SUB WOOFER: 24dB/Octave @ 80 & 120 Hz) • Relay muting and Speaker Guard™ protection, Peak and protection & power on indicators, On-Off power switch, Power Req. 120VAC 60 Hz . 240 AC/50Hz model available

Carvin’s optional LS Active Powered Systems take the guesswork out of selecting the ideal power source to drive your loudspeakers. With bi-amped and tri-amped models designed to handle the most demanding applications, APS amplifi ers are perfectly mated with four Carvin loud-speakers—the LS1502A, LS1503A, and LS1523A—creating studio quality powered systems. There’s even one APS power pack created specifi -cally to generate the bone shaking impact of our LS1801A subwoofer. APS systems make setup and operation easier with less gear to haul. Connect your mixer directly to these systems and you’re ready to rock!

LS1202 12” 300W 2-WAY $29999

$22999 List $395

LS1502 15” 2-WAY PASSIVE $32999

$24999

List $495

LS1502A 15” 350W BI-AMPED $46999

$39999 List $795

Main/Monitor Package1002-2 • 2LS1002 • 2 PRO50S $33999 save $50

1002-4 • 4 LS1002 • 2 PRO50S, PRO25S $65999 save $108

Main/Monitor Package1202-2 • 2 LS1202 • 2 PRO50S $45999 save $50

1202-4 •4 LS1202 • 2 PRO50S, PRO25S $89999 save $108

Passive Monitor Package1502-2 • 2 LS1502 • 2 PRO50S $49999 save $50

1502-4 • 4 LS1502 • 2 PRO50S, PRO25S $94999 save $130

“Active” Monitor Package1502A-2 • 2 LS1502A • 2 PRO50XLR, AD70 $74999 save $132

1502A-4 • 4 LS1502A • 2 PRO25XLR, PRO50XLR, AD70 $149999 save $190

LS1502A 2-WAY BI-AMPED 350w RMS (Hi Freq: 50w @ 16 Ω, Lo Freq.300w @ 8Ω

LS1503A 3-WAY TRI-AMPED 425w RMS (Hi Freq: 50w @ 16Ω, Mid Freq: 75w @ 16 Ω, Lo Freq. 300w @ 8 Ω)

LS1523A 3-WAY TRI-AMPED 900w RMS (Hi Freq: 80w @ 16 Ω, Mid Freq: 120w @ 8Ω, Lo Freq. 700w @ 4 Ω)

LS1801A SUB WOOFER700w RMS @ 4 Ω

Only 33 Lbs.

Only 44 Lbs.

APS ACTIVE CONTROLS• 3-band EQ, parametric mid sweep• EQ in/out switch • XLR through

3 Year Limited Warranty

MADE IN

USAMADE IN

USA

$5/mo. $7/mo.

$10/mo.

$20/mo.

$14/mo.

$27/mo.

$14/mo.

$27/mo.

$14/mo.$29/mo.

$22/mo.$45/mo.

Only 21 Lbs.

FREE SHIPPING

15800.854.2235 carvin.com

The LS1802 is a very high output, dedicated subwoofer system used for low frequency reproduction wherever additional LF coverage is needed. The LS1802 is well suited to supplement main sound reinforcement systems, drum or side fills, or installed in live music venues, clubs, or houses of worship. The LS1802 features dual high efficiency, high capacity 18” low frequency drivers with 4” voice coils for maximum low frequency extension.

Frequency Resp: +/-3dB 30Hz - 150Hz (24Hz - 10dB)Power Capacity: 1600 W continuous, 3200 W peak Sensitivity: 102 dB SPL, 1W / 1M (137 dB MAX)Nominal Impedance: 4 OhmsDimensions: 40”W x 22.75”D x 23.5”HWeight: 122 lbs

LS1802 TECHNICAL SPECS

The LS1801 is a compact, high output, dedicated subwoofer. A 1 3/8” pole mount is included for using the LS1801 with a pole to elevate other LS series mains systems. The LS1801 features a high efficiency, high capacity 18” low frequency driver with 4” voice coil for maxi-mum low frequency extension and continuous high powered applications.

See LS1801A powered speaker specs on pg 12Frequency Resp: +/-3dB 35Hz - 150Hz (29Hz - 10dB)Power Capacity: 800 W continuous, 1600 W peak Sensitivity: 98 dB SPL, 1W / 1M (130 dB MAX)Nominal Impedance: 4 OhmsDimensions: 19.75”W x 22.75”D x 23.5”HWeight: 69 lbs

LS1801 TECHNICAL SPECS

The LS2153 is a compact, quasi 3-way professional loudspeaker system. The LS2153 is designed as a quasi 3-way system featuring dual high efficiency 15” drivers. The bottom 15” is dedic-tated to low frequency, while the other 15” for low / mid frequencies. The LS2153’s high frequency reproduction comes from a Titanium high frequency driver. A great system for high-pow-ered applications where portability and lightweight is important.

Frequency Resp: +/-3dB 51Hz - 20kHz (45Hz - 10dB)Power Capacity: 800 W continuous, 1600 W peak Sensitivity: 101 dB SPL, 1W / 1M (133 dB MAX)Nominal Directivity: 90 degrees H x 60 degrees VNominal Impedance: 4 OhmsDimensions: 16.5”W x 15”D x 43.75”HWeight: 73 lbs

LS2153 TECHNICAL SPECS

The LS1503 is a 3-way profession-al, portable loudspeaker system ideally used as a front of house mains system for small to medium sized events. The LS1503 features a high efficiency 15” low freq. driver, a 6” mid driver and a Titanium high frequency driver mounted to a 90 deg. x 60 deg. constant directivity horn lens. Step up to a 3-way system that offers studio quality sound for your audience.

See LS1503A power specs on pg 14Frequency Resp: +/-3dB 52Hz - 20kHz (46Hz - 10dB)Power Capacity: 400 W continuous, 800 W peak Sensitivity: 101 dB SPL, 1W / 1M (130 dB MAX)Nominal Directivity: 90 degrees H x 60 degrees VNominal Impedance: 8 OhmsDimensions: 18.75”W x 15”D x 28.75”HWeight: 58 lbs

LS1503 TECHNICAL SPECS

LS1503 $34999

3-WAY PASSIVE

LS1503A $54999

TRI-AMPED 425W POWERED

$39999 List $695

List $1095$59999

LS1801 $36999

18” PASSIVE SUBWOOFER

$39999

List $695

LS2153 $39999

DUAL 15” PASSIVE 3-WAY

$44999 List $695

Only 73 Lbs.

Only 58 Lbs.

Only 69 Lbs. - 4” voice coil

Only 122 Lbs. - 4” voice coils

4” voice coils

LS1802 $59999

DUAL 18” 1600W SUBWOOFERList $1095

LS SERIESHIGH PERFORMANCE 3-way Systems

$11/mo.

$16/mo.

$12/mo.

$11/mo.

$18/mo.

List $1095

$59999 $17/mo.LS1801A $56999

700W POWERED SUBWOOFER

4” voice coils

Only 98 Lbs.

The LS1523 is a 3-way professional loud-speaker system ideally used as a front of house mains system for small to medium sized ven-ues. The LS1523 features dual high efficiency 15” drivers for low frequency reproduction, two 6” mid drivers for articulate midrange reproduction and a Titanium high frequency driver. If you need high output and 3-way clear sound reproduction, step up to the LS1523.

See LS1523A powered speaker specs on pg 12Frequency Resp: +/-3dB 49Hz - 20kHz (43Hz - 10dB)Power Capacity: 800 W continuous, 1600 W peak Sensitivity: 101 dB SPL, 1W / 1M (133 dB MAX)Nominal Directivity: 90 degrees H x 60 degrees VNominal Impedance: 4 OhmsDimensions: 22.5”W x 15”D x 46.75”HWeight: 98 lbs

LS1523 TECHNICAL SPECS

LS1523 $54999

3-WAY PASSIVE

LS1523A $74999

TRI-AMPED 900W POWERED

$59999 List $1095

List $1495$79999

$16/mo.

$22/mo.

LS1518 $89999

LS1523 (x1), LS1801 (x1) PRO10S (x1)

PACKAGE DEALS

LS1518A $129999

LS1523A (x1), LS1801 (x1) PRO10XLR (x1)

THE ULTIMATE LS SET UP!

FREE SHIPPING

FREE SHIPPING

16 800.854.2235 carvin.com

The TRx153b is an exceptional 3-way enclosure featuring a powerful 600w, 3” voice coil, heavy duty cast 15” low frequency driver, 60˚x40˚ horn loaded medium throw 8” mid driver, and 60˚x40˚ horn loaded Hi frequency pro driver. The TRx153b can be run passively with its com-puter-tuned, internal crossover or it can be con-veniently switched out for full tri-amp access. Ideally matched to the TRx218b, the TRx153b can be stacked on top of a vertical TRx218b for an over-the-crowd, 7 foot tower, or stacked side by side with another TRx153b on a horizontally laid TRx218b for 120 ̊of coverage. The TRx153b includes 12 fly points for overhead suspension.

Frequency response: 62 Hz to 20 kHz +/- 3dBUseable Low Frequency: 50 Hz (-10dB)Impedance / Power Handling:Full Range Passive: 8 ohms / 600 WrmsTri Amped: LF: 8 ohms / 600 Wrms MF: 8 ohms / 200 Wrms HF: 16 ohms / 60 WrmsSensitivity: 99 dB Full Range Passive (SPL 1W/1M)Tri Amped: LF: 100 dB MF: 102 dB HF: 105 dBDirectivity: 60 deg. Horizontal 40 deg. VerticalConnections: Neutrik NL4 and NL8 connectorsConfigurations: Full Range Passive or TriampEnclosure: Cross grain laminated 11 ply Baltic birchFinish: Black DuraTex™ scratch resistant, UV stableDim: 20”WF x 12.75WB x 17.25D x 41.75H”, 95 lbs

TRX153b TECHNICAL SPECS

The powerful TRx118b & TRx218b subwoofers, features a new custom engi-neered, high Q 4” voice coil cast 18” driver allowing for a tighter, powerful sub-bass in a smaller cabinet design. The compact design is ideal for both large and small venues.

TRX 18” SUBWOOFERS

TRX153b without grill

Frequency response: 60 Hz to 18 kHz +/- 3dBUseable Low Frequency: 54 Hz (-10dB)Impedance / Power Handling:Full Range Passive: 8 ohms / 400 WrmsBi Amped: LF: 8 ohms / 400 Wrms HF: 16 ohms / 60 WrmsSensitivity: 99 dB Full Range Passive (SPL 1W/1M)Bi Amped: LF: 100 dB HF: 105 dBDirectivity: 90 deg. Horizontal 60 deg. VerticalConnections: Neutrik NL4 connectorsConfigurations: Full Range Passive or BiampEnclosure: Cross grain laminated 11 ply Baltic birchFinish: Black DuraTex™ scratch resistant, UV stableDim: 18.5W x 14.5D x 24H”, 51 lbs

TRX152 TECHNICAL SPECS

TRX153b 15" 800W 3-WAY MEDIUM THROW MAIN

TRX153b $62999 List $1195

Serial No.XXX000

MADE IN THE

USAINPUT THROUGH

NL8 PINOUT1+ LOW POS.1– LOW NEG.2+ MID POS.2– MID NEG.3+ HIGH POS.3– HIGH NEG.4+ THROUGH4– THROUGH

TRI AMP

FULLRANGE

PASSIVE

NL4 PINOUT1+ INPUT POS.1– INPUT NEG.2+ NOT USED2– NOT USED

c

3 WAY LOUDSPEAKER SYSTEMPOWER CAPACITYFULL RANGE PASSIVE – 600Wrms / 8 ohmsTRI AMP LF – 600Wrms / 8 ohms MF – 200Wrms / 8 ohms HF – 60Wrms / 16 ohms

Easy passive or tri-amp changeover

2500-218b-2 $194999

1 DCM2500 amp, 2 TRX218b, 2 PRO50TL cables

SUBWOOFER SYSTEM

The powerful compact TRX122 12” & TRX152 15” monitor/mains are ideal for stage monitoring vocals with its sweet, focused high end, balanced mids and tight low end. The cabinet is designed with a 45 degree tilt for nor-mal monitoring and a 62.5 degree tilt for near field monitoring. With its 8 fly points and pole mount, it works well for front of house mains in smaller venues.

TRX MAIN/MONITORS

Frequency response: 35 Hz to 150 Hz +/- 3dBUseable Low Frequency: 29 Hz (-10dB)Impedance / Power Handling: 8 ohms / 800 WrmsSensitivity: (SPL 1W/1M) 98 dBConnections: Neutrik NL4 connectorsConfigurations: SubwooferEnclosure: Cross grain laminated 11 ply Baltic birchFinish: Black DuraTex™ scratch resistant, UV stableDim: 20W x 22.5D x 24H”, 78 lbs

TRX118b TECHNICAL SPECS

2000-118b-2 $139999

1 DCM2000 amp, 2 TRX118b, 2 PRO50TL cables

SUBWOOFER SYSTEM

TRX122 $32999

List $649

TRX218b $79999 $69999List $1495

• BALTIC BIRCH • DURATEX™ FINISH

TRX122 & TRX152 are both pole mountable as mains.

Frequency response: 68 Hz to 18 kHz +/- 3dBUseable Low Frequency: 60 Hz (-10dB)Impedance / Power Handling:Full Range Passive: 8 ohms / 300 WrmsBi Amped: LF: 8 ohms / 300 Wrms HF: 16 ohms / 60 WrmsSensitivity: 99 dB Full Range Passive (SPL 1W/1M)Bi Amped: LF: 100 dB HF: 105 dBDirectivity: 90 deg. Horizontal 60 deg. VerticalConnections: Neutrik NL4 connectorsConfigurations: Full Range Passive or BiampEnclosure: Cross grain laminated 11 ply Baltic birchFinish: Black DuraTex™ scratch resistant, UV stableDim: 16W x 12.5D x 20.5H”, 32 lbs

TRX122 TECHNICAL SPECS

Frequency response: 35 Hz to 150 Hz +/- 3dBUseable Low Frequency: 29 Hz (-10dB)Impedance / Power Handling: 8 ohms / 800 WrmsSensitivity: (SPL 1W/1M) 102 dBConnections: Neutrik NL4 connectorsConfigurations: SubwooferEnclosure: Cross grain laminated 11 ply Baltic birchFinish: Black DuraTex™ scratch resistant, UV stableDim: 40W x 22.5D x 24H”, 143 lbs

TRX218b TECHNICAL SPECS

PL42 Pole42” high, 1 3/8” diameter$19.99

CompactLightweight 78 Lbs.

4” voice coil

TRX122 & TRX152 are both stand mountable as mains.

$64999

$37999

$19/mo.

$10/mo.

TRX152 $34999

List $695

$39999$11/mo.

TRX118b $44999 List $895

$14/mo.

$42/mo.

$21/mo.

$58/mo.

MADE IN

USAMADE IN

USA3 YEAR WARRANTY

Compact 143 Lbs. 4” voice coils

FREE SHIPPING

FREE SHIPPING

17800.854.2235 carvin.com

Frequency response: 62 Hz to 20 kHz +/- 3dBUseable Low Frequency: 50 Hz (-10dB)Impedance / Power Handling:Full Range Passive: 8 ohms / 600 WrmsTri Amped: LF: 8 ohms / 600 Wrms MF: 8 ohms / 200 Wrms HF: 16 ohms / 60 WrmsSensitivity: 99 dB Full Range Passive (SPL 1W/1M)Tri Amped: LF: 100 dB MF: 102 dB HF: 105 dBDirectivity: 60 deg. Horizontal 40 deg. VerticalConnections: Neutrik NL4 and NL8 connectorsConfigurations: Full Range Passive or TriampEnclosure: Cross grain laminated 11 ply Baltic birchFinish: Black DuraTex™ scratch resistant, UV stableDim: 20”WF x 12.75WB x 17.25D x 41.75H”, 95 lbs

Frequency response: 68 Hz to 18 kHz +/- 3dBUseable Low Frequency: 60 Hz (-10dB)Impedance / Power Handling:Full Range Passive: 8 ohms / 300 WrmsBi Amped: LF: 8 ohms / 300 Wrms HF: 16 ohms / 60 WrmsSensitivity: 99 dB Full Range Passive (SPL 1W/1M)Bi Amped: LF: 100 dB HF: 105 dBDirectivity: 90 deg. Horizontal 60 deg. VerticalConnections: Neutrik NL4 connectorsConfigurations: Full Range Passive or BiampEnclosure: Cross grain laminated 11 ply Baltic birchFinish: Black DuraTex™ scratch resistant, UV stableDim: 16W x 12.5D x 20.5H”, 32 lbs

TRX153-44 $869999

List $18,823 Package Savings $440Passive 4-way system with sub rackPackage contains• Four TRX153 • Four TRX218b• One TRX1MAIN Rack • One TRX2SUB Rack

TRX153-22 $499999

List $10,359 Package Savings $229

Passive 4-way systemPackage contains• Two TRX153 • Two TRX218b• One TRX1MAIN Rack

TRX153-22T $639999

List $12,543 Package Savings $340Tri-amp plus Sub 4-way systemPackage contains• Two TRX153 • Two TRX218b• One TRX2SUB Rack • One TRX3TRI Rack

SP8250 $38999

250 ft. 12ga 8 conductor speaker wire

SP8 $1699

eaNL8 Speakon™ connector 8-pin

Choose from two, 4-way passive crossover systems and two, 4-way active crossover systems. All TRx sys-tems include power amplifiers, cables, and racks. Choose your own mixing console from pages ( 3 - 9 ) and receive an additional 10% off of the lowest marked price.

SYSTEM QTY TRX122 AMP CABLES INCLUDED SYSTEM TRX1222 two none 2 PRO50TL $659.99 TRX1224 four none 2 PRO50TL, 2 PRO25TL $1249.99 TRX1222-M2 two DCM1015 2 PRO50TL, 2 PRO10P $1079.99 TRX1224-M4 four DCM1015 4 PRO50TL, 2 PRO10P $1699.99

12” TRX122 MONITOR SYSTEMS—WITH PACKAGE DISCOUNTS

SYSTEM QTY TRX152 AMP CABLES INCLUDED SYSTEM TRX1522 two none 2 PRO50TL $699.99 TRX1524 four none 2 PRO50TL, 2 PRO25TL $1349.99 TRX1522-M2 two DCM1015 2 PRO50TL, 2 PRO10P $1129.99 TRX1524-M4 four DCM1500 4 PRO50TL, 2 PRO10P $1779.99

15” TRX152 MONITOR SYSTEMS—WITH PACKAGE DISCOUNTS

TRX MONITOR SYSTEMS

TRX1MAIN Rack $234999

• Two DCM2000 Amps• One DCM2570 Amp• One XC3000 Crossover• Four PRO50TL Speakon cables• Two PRO10TL Speakon cables• Four PRO10XLR cables• One 12 space RW12 rack w/ casters

TRX2SUB Rack $149999

• Two DCM2000 Amps• One XC3000 Crossover• Two PRO50TL Speakon cables• Two PRO10XLR cables• One 12 space RW12 rack w/ casters

TRX3TRI Rack $234999

• One DCM600 Amp• One DCM1500 Amp• One DCM2570 Amp• One XC3000 Crossover• Six PRO10XLR cables• One SP8250 8 conductor wire spool• Six SP8 (NL8) • 8 SP4 (NL4)• One 12 space RW12 rack w/ casters

Packages feature multiple monitors, two monitor mix setups with multiple monitors and 4 monitor mix setups with multiple monitors.

Tri-amp plus Sub 4-way systemPackage contains• Four TRX153 • Four TRX218b• One TRX2SUB Rack • One TRX3TRI Rack• Two DCM2000 • Two SP50 • Two XLR8

TRX153-44T $979999

List $21,007 Savings $640

SAVE$170

SAVE$250

SAVE$250

TRX MAINS SYSTEMS

$20 per month

$38 per month

$32 per month

$51 per month

$21 per month

$41 per month

$34 per month

$54 per month

$45/mo. $74/mo. $74/mo.

MADE IN

USAMADE IN

USA3 YEAR WARRANTY

$150/mo.

$192/mo.

$260/mo.

$294/mo.

$150/mo.

FREE SHIPPING

18 800.854.2235 carvin.com

7 CHANNELS with ultra low-noise preamps • Freq. response: 20 - 20k Hz with less than 0.01% THD • 4 stereo channel faders for CD, tape and turntables

INPUTS • 4 PAIRS L/R RCA INPUTS: Line & Phono (RIAA) equalized • 4 segment LED metering for each channel • 3 professional XLR balanced and 1/4” mic inputs

CH EQ • Active 3-band EQ on every channel Lo, Mid & Hi

24Bit PROCESSOR with 256 effects • Reverbs, Echo’s, Flanging, Chorus - adjustable parameters • Assignable to crossfade mix A /B and Mic 1-3

MASTER • Talk-over switch • A/B Crossfader • Master output fader with L/R LED metering • Monitor pan mix from Master or Cue • Monitor level • Built in power supply - no wall-wart, 90 to 250V 50-60 Hz Black powder coat steel: 19W x 3.5D x 8.5H”, 9 lbs

The S16 new ultra-low noise preamps (same as SL console) provide noiseless and distortion-free studio recordings. The exclusive 44w stereo power amp section will give ample power to your passive studio monitors • 8 phantom powered XLR Mic pre-amps • 4 stereo (8 mono) chan-nels with gain switches • channel inserts • 3 band channel EQ • dual effects sends • ste-reo pan • headphone jack • LED VU meters • two balanced XLR outputs and two 1/4” out-puts • effects send and return jacks • RCA tape in and out, stereo USB in and out for computer recording.

S1 6 16 CH STUDIO SERIES Mixer WITH STEREO USB IN-OUT

Freq. response: 20 - 20 kHz ±1 dBTHD distortion: less than .002%Equivalent input noise: -128dBmS/N Ratio 100 dBDynamic Range: 114 dBMic Gain: 45 dBLine Gain: 30 dBTotal Gain: 65 dB (balanced)Max Output: +20 dBmEQ Section HI ±15 dB @ 12k Hz MID ±10 dB @ 2.2k Hz LOW ±15 dB @ 85 HzStereo Power Amp: 44w RMSSize/Wt: 16W x 12D x 3”H Wt: 8 lbs

STUDIO MATE S16 SPECS

Frequency Response: 75 Hz to 19.5 kHzPower Handling: 125w RMSRecommended Amp: 50 to 150 wattsNominal Impedance: 8ΩInputs/Outputs: Two 1/4”(PM5B) , two spring terminalsWoofer Enclosure Type: Vented BoxConstruction: Molded EnclosureDim/Wt: 10.5”H x 6.75D” x 6.75W • 4 lbs.

PM5 TECHNICAL SPECIFICATIONS

The PM5-B is simply the best spot/reference monitor made! • As a true 2-Way system, you get the full audio spectrum from 86 to 19.5kHz. • This multi-purpose monitor yeilds excellent high frequency and exceptional bass from a heavy-duty 5 1/4” woofer. • 125W capacity • High output level is “big” sounding, not what you’d expect from a small enclosure. • High impact molded enclosure incorporates mounting slots for hanging. • The Black PM5-B features a 20-degree angle insert bracket to accept a mic stand for spot monitoring & dual 1/4” speaker jacks (so you can daisy-chain PM5-B’s together) along with wire terminals. The PM5-W (white) features wire terminals.

PM5 125W REFERENCE SPOT MONITOR

Applications: Spot monitor/reference monitor for studios, home theater, auditoriums, restaurants, outdoor patios & clubs.

PM5-W $6999

WhitePM5-B

$7999 Black–stand mount & 1/4” jacks

S16 $29999 List $395

R162 Rackmount Kit $14.99

$9/mo. NEW!Exclusive 44w

Stereo Power Amp

PRO-MIX 7 $29999 List $5 99$9/mo.DJ Mixer 24-BIT DSP

256 EFFECTS

MADE IN

USAMADE IN

USA

OMNI™ Tweeter swivel adjustment for directional accuracy

Terminals accept wire and banana connectors. PM5-B features 1/4” speaker jacks

DropCeiling

PM5-CB Bracket Wallmount/Ceiling with saftey cable

$39.99 pair

PM5-UB black “U” Bracket PM5-UW white “U” Bracket

$9.99 pair

Water Resistant

For outdoor use

FREE SHIPPING

19800.854.2235 carvin.com

PM5 125W REFERENCE SPOT MONITOR

SL DESIGN The SL evolved from serious live/recording design studies resulting in a state-of-the-art console that offers pristine performance. Renown for its trans-parent clean sound and performance.

• EIN better than -128 dB• THD lower than .002%. • Bandwidth 10 Hz to 80k Hz (Mic. In - Master Out)• Crosstalk less than -80 dBu @ 1k Hz

CHANNEL FEATURES• Direct Out - balanced• Tape In - balanced• Line In - balanced• Mic. In - balanced• Insert - TRS• +48V Switch per 8 CH• Phase Switch• Tape In Switch• Low Cut Filter• 4 Band EQ - 2 Mid Sweeps• EQ Bypass switch• 8 Aux sends• Pre/Post switch for Aux 3/4 & 5/6• Aux 7/8 Pan control• Tape to 5-8 switch• Aux 7/8 Pre Fader with EQ switch• Solo switch with LED• Mute switch with LED• L/R bus assign switch• 1-8 bus assign switches• Long throw 100mm fader• CH Metering (10 segment LED’s)

MASTER FEATURES• L/R MASTER faders• 8 SUB GROUP faders w Peak/Mute LED’s L/R Pan , Mute, & Solo• 8 AUX SENDS PFL switches, Group Flip 1-4 switches• 4 STEREO RETURNS Level, L/R Pan, Aux 1, 2 Levels, Mute, Solo sw• TAPE IN - L/R or Aux 1/2• TAPE OUT - L/R / Aux 7/8• CONTROL RM GROUP (level to) L/R, Aux 1/2, Aux 7/8, Tape, Mono, Studio• STUDIO GROUP Level to L/R, Aux 1/2, Aux 7/8• Metering - 8 sub + L/R (10 segment LED’s)

MASTER CONNECT• L/R Master (XLR & TRS)• 8 Master Sub Groups (XLR-bal.)• 8 Master Inserts. L/R (TRS)• 8 AUX Sends (TRS-bal.)• 4 AUX Stereo Returns (L/R, 8-TS)• Tape L/R IN/OUT(RCA)• 2 High current Headphone (TRS)• External 2U Power Supply (4-wire NL4 Speakon™)

CONSTRUCTION• Copper shielded FR-4 Fiberglas™ circuit cards• High slew rate 4565 & 2043 op-amps• 1% tolerance SMT components• Sealed controls• Powder coat steel chassis• 1000 watt external 2U SLP5600 power supply• Standard 10’ Speakon™ cable to connect power supply

SL40C 40ch

FREE RW40 HEAVY DUTY ROAD WARRIOR CASE

G12V 12V XLR mini-light $29.99 ea (accepts up to 3)

$369999List $6995

SL Studio Live 40 CH 8 Bus Console

SLP5600POWER SUPPLY

$111/mo.

DIMENSIONS/WTSL40C: 52.0”W x 22.7”D x 8”H, 68 lbs. add 2.25”total width for handles

FREE SHIPPING

PM5-CB Bracket Wallmount/Ceiling with saftey cable

$39.99 pair

20 800.854.2235 carvin.com

DYNAMIC AND CONDENSER MICS The M50 is Carvin’s “value priced” profes-sional vocal mic that is not to be compared with the poor perfor-mance of other $49 mics. Unidirectional with a cardioid polar pattern. Features a c o n v e n i e n t o n / o f f switch built in foam wind screen for pop, breath & wind noise rejection. Freq. Resp. is 50 Hz to 14 kHz.

SAVE 5% when 4 or more mics are purchased

Together with Carvin’s CM90E as overhead mics, the D44 and D42 uni-directional dynamic mics are all you need to mic your drums. Both models are capable of han-dling high sound pressure levels and a uni-directional cardioid polar pickup pattern for rejecting unwanted sound. The Zinc die-cast metal housing features an adjustable stand mount.

The CM90E is a unidirec-tional condenser mic. • Extremely flat response and wide frequency range of 30Hz to 20kHz will give the user exceptionally accurate results in recording and sound rein-forcement applications • High sensitivity for use in distant miking such as choirs, podi-ums and conference rooms • Excellent for overhead drum miking with max SPL at 132dB • Cardioid polar pattern gives maximum rejection of off-axis sounds for excellent feedback control.

The M68 microphone is our most popular unidirectional hand-held dynamic micro-phone. It is renowned for its presence and crisp output for live vocal applications. • Frequency response is 45Hz to 15kHz • Built-in foam wind screen for excellent pop, breath and wind noise rejection • Cardioid polar pattern for excellent off-axis performance and feedback control.

D44 $5999 List $99

BASS DRUM MIC

D42 $4999 List $89

SNARE-TOM TOM MIC

M68 $7999 List $159

UNIDIRECTIONAL DYNAMIC VOCAL MIC CM90E $11499 List $239

UNIDIRECTIONAL CONDENSER MIC

DRUM MICS

FREE 20ft XLR mic cable

M50 $4999 List $129

UNIDIRECTIONAL DYNAMIC VOCAL MIC

List $599DMK7 $39999 SAVE $84

7 MIC KIT: One D44, Four D42, Two CM90E

DMK3 $12999

SAVE $30 3 MIC KIT: One D44, Two D42

List $285

CTM100 $25999 List $659

TUBE CONDENSER STUDIO MIC

FREE 20ft XLR mic cable

FREE 20ft XLR mic cable

Awesome Tube Warmth

• EQ’d for studio monitoring • Lightweight comfortable fit • High Quality closed back design• Neodymium magnet• 9ft cord-gold plated 1/8”connector(1/4” adaptor included)• Freq. Resp: 20 - 22 kHz • Imp: 64ohm• Sens: 106dB S.P.L. at 1KHz +/- 3dB

H40M $4999 List $129

STUDIO HEADPHONES

Note: drum mics do not ship with XLR cables

SPECIFICATIONS: FREQUENCY RESP.: D42: 80Hz to 13kHz D 4 4 : 2 0 H z t o 1 0 k H z , M A X I M U M S P L ( @ 1 % T H D ) D 4 2 : > 1 3 0 d B , D44: >140dB

TUBE CONDENSER MIC The CM87S is a high quality, multi-purpose Large Diaphragm Studio Condenser mic. It features a cardi-oid pattern with a Gold Sputtered, 6 micron element and premium, noiseless FET electronics. A 10 dB pad switch handles really hot sig-nals and a low cut switch reduces rumble. Ideal for stunning vocals as well as capturing nuances of an acoustic guitar. A max. SPL of 145dB (with 10dB pad) also makes it an excellent instrument and per-cussion mic. SPECIFICATIONS:Freq. Range: 30Hz-20 kHz, Dynamic Range: 133 dB, Output Imp.: 200 Ohms, Pad Switch: 10dB, Low Cut Switch: -6dB @ 80Hz , Shockmount: eliminates low freq. vibration & handling noise (-72 dB below 40Hz), Power Supply: 48V (Included) Cable: Oxygen-free 30 ft. cable Mic Dimensions: 7.5”L x 2.75”WCase: Custom aluminum flight case

Optional pop screen WS87: $29.99

CONDENSER MIC

CM87S $14999 List $495CONDENSER STUDIO MIC

The CTM100 is perfect for recording both criti-cal vocals and instruments for the warmest, fullest, smoothest sound. The dual diaphragm, multi-pattern design gives you 9 different polar patterns to get the perfect sound every time! You will not need to EQ this mic - it sounds awesome right out of the box! The CTM100 features dual 1” gold sputtered 5 micron diaphragms in a special shock mounted capsule and a vacuum tube pre-amp. The included power supply houses the control for the 9 different polar patterns. The shock-mount suspension virtually eliminates vibra-tion and handling noise. If you want your recordings to sound as warm and full as your favorite artist, the CTM100 is the ulti-mate in classic sound reproduction! SPECIFICATIONS:Freq. Range: 20 Hz - 20 kHz, Dynamic Range: 133 dB, Output Imp.: 300 Ohms, Power Supply: 48V Cable: 30 ft. Gold 7-pin cable, Mic Dimensions: 9.75”L x 2.75”W Includes: travel case, foam windscreen, shockmount suspension, XLR cable and carry pouch for mic.

FREE SHIPPING

21800.854.2235 carvin.com

The UX16 16-channel professional wireless systems offer the freedom of running multiple systems simultaneously The UX16-MC hand held system utilizes our finest M68 ele-ment for crisp hi-end with a smooth bottom-end • The optional UX16-ID 7-color ID end caps let you know who’s on what channel • Our latest dual AA batteries technology replaces the old 9V battery system lasting up to 25 hours • The PLL (phase lock loop) engineering uses UHF technology (ultra high frequencies) to assure the signal carrier is locked-in for up to 300’ • Dual Diversity receivers automatically switch to the best signal path so you don’t get drop-outs • Full bandwidth with less than .5% THD delivers impeccable sound that even the high priced systems lack.

16 CHANNEL UHF IN EAR SYSTEMS• 16 UHF Channels • Stereo Monitoring• Digital clarity earpieces• Premium Koss™ Ear pieces • Purchase unlimited receivers

UX-DR $29991U rackmount kit for 1 or 2 UX16 or UX1000

UX-GT $2299 Mini XLR to 1/4” instr. cable for body packs

UX-LP1 $7999 Lavalier mic for body packs

UX16-BP List $445 $21999

Body pack and UX16 receiver UXBP16 body pack only $139.99Order instrument cable, headset mic or lavalier mic separate

SPECIFICATIONS: 50 Hz to 18 kHz. S/N ratio: 100dB, Audio Input: 600Ω XLR. Stability: ±.005%, Freq. stability: ±0.005% crystal con-trolled, powered by AC/DC power adapter (provided). Warranty: 90 days, batteries required.

PM1000 List $599 $29999

with KOSS™ EAR PIECES Includes PM1000 transmitter & PM1001 receiver

UHF WIRELESS SYSTEMS

UX16-ID $1499 7 colored end caps for Mic ID

PM1001EXTRA RECEIVERS$12999

The UX1000 is our finest wireless system featuring 960 user selectable channels with diversity UHF receivers. Superb tone, anti-feedback control, low battery indicator and assignable groups are just some of the features of the UX1000. Select either the UX1000-MC hand held mic or the UBP1000 belt-pack transmitter. Step up to a wireless system that will meet all your expectations.SPECIFICATIONS: 50 Hz to 19 kHz. S/N ratio: 101dB, Receiving System: Diversity- PLL Synthesized, Stability: ± 0.005%, Image Rejection: >60 dB, THD: ≤1% @ 1kHz, RF Sensitivity: -107dBµ for 12 dB S/N AD, Audio Output: -12 dBµ / 800 ohm -unbalanced, Output Conn.: Unbalanced 1/4” phone jack, Balanced XLR, Steel case, 8.3” W x 1.6” H x 5.4” D, Net Weight: 2.3 lbs, Warranty: 90 days, batteries required.

UX1000-MC List $895$42999

Hand Held Mic and UX1000 receiver

UX1000-BP List $795 $39999

Body pack and UX1000 receiver • UBP1000 body pack only $249.99Order instrument cable, headset mic or lavalier mic separate

ACCESSORIES FOR UX16-BP & UX1000-BP

UX-HM2 $9999 Headset mic for body packs

UX16-MC List $495 $22999

Hand Held Mic and UX16 receiver

Carvin’s In-Ear monitors can actually improve the quality of your performances by letting each performer hear themselves, as well as others in the group, clearly. UHF operation puts them high above radio and TV interfer-ence, as well as increasing their effective range (up to 300’. typical). The PM1000 offers 16 user-selectable channels – virtually eliminating any chance of interference by other wireless units. Stereo or mono transmission modes allow easy integration into any sound system. Use the PM1000 transmitter with as many PM1001 receiver/In-Ear units as you want, or use multiple PM1000 transmitters for separate monitor mixes. SPECIFICATIONS: 50 Hz to 12 kHz. Audio Input: 600Ω XLR. Stability: +-.005%, 16 PLL sythesized UHF channels, powered by AC power adapter (provided). Warranty: 90 days. 9V battery required.

EXTRA KOSS™EAR PIECES

KOS1 $2399

UX1000 rear

16 CHANNELS

To take the kind of abuse that I tend to dish out on stage to my gear... Carvin wirelesses must be made of steel. Cause thats what it seems like. Sturdy and absolutely the most reliable piece of equipment I own. Hands down.– Mike D. Killswitch Engage

960 CHANNELS4 USER GROUPS

FREE SHIPPING

22 800.854.2235 carvin.com

• Steel enclosure• Premium XLR connectors• Braided steel strain-reliefs (not plastic)• Heavy 22 ga individually shielded copper wire• SK8-100 100’ ideal for on-stage distribution• SK16 & SK24 feature 8 XLR returns

SK8-100 8 CH + 4 returns—100’ $149.99SK12 12 CH + 4 returns—100’ $229.99SK16 16 CH + 8 returns—100’ $299.99SK24 24 CH + 8 returns—100’ $399.99

SNAKE CABLES

PRO5TL 5’ 12 GA spkr cable - 2 cond. $22.99PRO10TL 10’ 12 GA spkr cable - 4 cond. $29.99PRO25TL 25’ 12 GA spkr cable - 4 cond. $39.99PRO50TL 50’ 12 GA spkr cable - 4 cond. $59.99PRO100TL 100’ 12 GA spkr cable - 4 cond. $99.99

1/4” PREMIUM 15GA SPEAKER CABLES

PRO5S 5’ 15 ga speaker cable $11.99PRO10S 10’ 15 ga speaker cable $14.99PRO25S 25’ 15 ga speaker cable $18.99PRO50S 50’ 15 ga speaker cable $24.99

MTF55 XLR cable ground lifter $17.99

MTM65 male XLR to 1/4” matching trans. $17.99

MTF60 female XLR to 1/4” matching trans. $17.99

INSTRUMENT AND LINE CABLESPremium instr. & mic cables features low-noise, heavy gauge copper wire for superior performance.

PRO3P 3’ shielded 1/4” patch cable $7.99PRO10P 10’ shielded 1/4” patch cable $9.99PRO20P 20’ shielded 1/4” instr cable $16.99PRO20PR 20’ shielded rt. angle 1/4” cable $16.99PRO20C 20’ braided tweed 1/4” cable $16.99

AD64 1/4” plug to 1/4” plug $6.99

RC30 1/4” plug to RCA plug $6.99

AD66 RCA plug to 1/4” plug $6.99

AP1 stereo 1/4” plug to R & L 1/4” jacks $7.99

AD70 male XLR to 1/4” stereo $10.99

AD71 female XLR to 1/4” stereo $10.99

RR10 10’ 1/4” stereo plug to L/R RCA $10.99

MIC AND LINE XLR CABLES

XLRMMale XLR$4.99

XLRF Female XLR $4.99

PRO3XLR 3’ bal. shielded mic w XLR’s $6.99PRO10XLR 10’ bal. shielded mic w XLR’s $9.99PRO25XLR 25’ bal. shielded mic w XLR’s $19.99PRO50XLR 50’ bal. shielded mic w XLR’s $29.99

TRANSFORMERS

XLPM2 Stainless steel dual male XLR plate. For custom installation. $16.99

XLPF2 Stainless steel dual female XLR plate. $16.99

AB1 1/4” to 1/4” footswitch. For A/B switching of guitar, line, or speakers (for inputs or outputs). $22.99

These 1/4” 6 inch long assorted colored cables are sold in packages of six.SH66 $9.99 6 cables per package

PB48 STEREO PATCH BAY features 1/4” bal. connections for both the front & rear panel. Patch bay may be used either bal.or unbal. Front panel jacks are “half-normalled” & can easily be configured as “not normalled” without soldering if desired. $39.99

FDR60 Direct box with 1/4” input, balanced XLR outputs. Includes input attenuator and ground lift. $29.99

PHW22 Phantom power supply. Switchable 12v or 48v phan-tom supply for condenser mics. Dual XLR inputs and outputs. $39.99

ADAPTORS

PRO20C

SP4 4-conductor Speakon™ $7.99SP8 8-conductor Speakon™ $16.99SP64 Speakon™ coupler $9.99AD40 Speakon™/bannana $19.99AD41 1/4” female to Speakon™ $19.99AD42 1/4” female to Banana $14.99

AD40

AD41

AD42

SP64

R6 6’ cable, 4 RCA plugs to 4 RCA plugs $10.99

PP10 10’ 1/4” stereo plug to R & L mono plugs $10.99

SLC8 8’ stereo 1/4” to 1/4” male $29.99

8 RETURNS (SENDS) ON16 & 24 CH MODELS

HIGH CURRENT SPEAKON CABLES

SP4

1/4”FREE SHIPPING

23800.854.2235 carvin.com

1/4” PREMIUM 15GA SPEAKER CABLES

MS13 $2999

30” professional fixed boom with adjust-able tripod stand. Includes mic cable clips. Anti-reflective black.

MS11 $2299

36” Telescoping short fixed boom with adjustable tripod stand. Set stand as low as 18”H - ideal for micing bass drum or amp cabinets. Anti-reflective black.

MB9 $1499

35” professional boom. Anti-reflective black.

MA12 $2999

This amp stand is strong enough to hold a 2 x 12 combo amp or medium sized speak-er. Height adjustments are simple with the quick-lock knob. Holds up to 100 lbs.

SS20 $4999

This speaker stand is adjustable to 6ft 8inches high. It will support speaker enclo-sures up to 85 lbs. For use with speakers fea-turing pole mount cup. Anti-reflective black.

MR20 $6999

This heavy-duty adjustable stand will hold over 150 lbs and makes getting to your mixer controls easy. You can mount your power amps underneath the mixer with the built-in 12-space 19” rack rails. Features a set of sturdy casters. Anti-reflective black.

GSD3 $1499

This compact high quality guitar stand is perfect for both acoustic and electric gui-tars and basses. Anti-reflective black. RS20882 $6399

Folding tubular stand with rubber cush-ion-holds 7 guitars-acoustic or electric.

GSD $1199

Quality tubular stand with rubber cov-ered contact points won’t scuff glossy or natural wood finishes. Secure, safe support for your guitar. Adjustable neck height. Anti-reflective black.

DB35 $3999

24“ x 16“ dolly board features non-skid Duratuff II™ and heavy-duty 31/2” swivel casters with a double bearings system. Will withstand weights up to 1000 Lbs!

MST12 3999

This fully adjustable tripod music stand features a 13” x 19” sheet holder that can be adjusted to any angle (pivots 180˚)! Extends to 46” high. Anti-reflective black

SS20 $4999

MS11 $2299

MB9 $1499

GSD3 $1499

MS15 $1999

This mic stand features a low silhouette cast base for high stability. The positive grip action clutch provides quick adjust-ments from 34” to 62”. Anti-reflective black.

MST12

3999

DB35$3999

MK18 $4499

This heavy-duty keyboard stand uses a quick-set mechanism for fast set-ups, great-er adjustment range and superior strength. Holds over 150 lbs. Adjustable height: 27”- 34 1/2”. Spread: 21”- 29 1/2”. Base width: 20”. Anti-reflective black.

6’ 8” SPEAKER

STAND

Heavy Duty Cases and Stands

MS15 $1999

MK18$4499

GSD $1199

RS20882 $6399

Quick release

adjustment lever

Protect your 19” rack gear in Carvin’s heavy-duty Road Warrior™ cases featuring plywood inner walls (not fiberboard). U spaces inside overall

RW4 4 18.5d 21w x 19d x 8.75”h $79.99 RW5 5 12.75d 20.5w x 13.2d x 10”h $89.99RW6 6 18.5d 20.75w x 19d x 12”h $99.99 RW8 8 18.5d 20.75w x 19d x 15”h $119.99RW12 12 18.5d 20.9w x 23d x 23.75”h $179.99with casters

ROAD WARRIOR™ CASES

RW16 16 space $349.99shockmount / casters premium plywood- not fiberboard

SS10 $4999

MS9 $1599

Mini mic stand with boom.

SS10 $4999

Wall mount speaker bracket for use with speakers featuring pole mount cup. Anti-reflective black.

MB1 $3999

RW16 16U shockmount case

Shockmountfoam core

CB2 $2999

MR20 $6999

MS13

$2999

Heavy duty speaker stand bag with handles. Made out of rugged fabric. Holds two stands.

MA12$2999

MS9 $1599

FREE SHIPPING