Technomelt EMHigh-performance adhesive range for PET labeling.Complete range of pressure sensitive adhesives.

» Easy, effi cient, economical and reliable in operation

» Delivering top quality labeling

» Versatile usage

» High-performance in a wide variety of applications

High-performance adhesive range for PET labeling.Rubber-basedlabeling hotmelts Technomelt EM 357 Technomelt EM 360 Technomelt EM 362 Technomelt EM 132-22

Application: standard diffi cult substrates, hot fi lling, lowest migration tendency

standard, high elongation capacity

superior, low mileage, versatile

Viscosity:Brookfi eld at 150°C

600 - 150 mPas 850 - 1 400 mPas 600 - 1 050 mPas 300 - 500 mPas

Recommended application temperature:

130 - 150°C 140 - 180°C 130 - 150°C 120 - 140°C

EVA-basedlabeling hotmelts Technomelt EM 349 Technomelt EM 300

Application: basic, standard requirements (up to 45°C), low migration tendency

standard, for cold and hot containers (up to 50°C), lowest migration tendency

Viscosity:Brookfi eld at 150°C

1 000 - 2 000 mPas 1 500 mPas

Recommended application temperature:

130 - 160°C 130 - 160°C

Labeling hotmeltspecialties Technomelt EM 369 Technomelt EM 325/328 Technomelt EM 1051 E Technomelt EM 89 E

Application: labeling followed by head shrink (contoured containers)

suitable for PET recycling (caustic soda dispersible)

standard, spin spray applica-tions, high elongation capacity

superior, water clear, trouble shooter for diffi cult surfaces

Viscosity:Brookfi eld at 150°C

1 350 - 2 050 mPas (at 120°C) 300 - 600 mPas (at 150°C) 1 300 mPas (at 150°C) 750 - 1 050 mPas (at 130°C)

Recommended application temperature:

110 - 150°C 120 - 160°C 150 - 160°C 120 - 140°C

Try Technomelt EM now!To experience how our Technomelt EM range can improve your labeling operation, please contact your local sales representative for more information and assistance with product trials.

The information provided herein, especially recommendations for the usage and the application of our products, is based upon our knowledge and experience. Due to diff erent materials used as well as to varying working conditions beyond our control we strictly recommend to carry out intensive trials to test the suitability of our products with regard to the required processes and applications. We do not accept any liability with regard to the above information or with regard to any verbal recommendation, except for cases where we are liable of gross negligence or false intention. Except as otherwise noted, all marks used in this fact sheet are trademarks and/or registered trademarks of Henkel and/or its affi liates in the US, Germany, and elsewhere. © Henkel AG & Co. KGaA, 01/2014

Technomelt EM

Distributed by:

Direct Adhesives LimitedUnit 15 Chartmoor RoadLeighton BuzzardLU7 4WG UK

Phone: 0800 085 7548

info@directadhesives.co.ukwww.directadhesives.co.uk