High Agi l i tyHigh Performance.

Introducing the most advance TA-Ser ies we ever bui l t .

Website: www.takam.comTel:+0086-592-7362548 Fax:+0086-592-7362540

260 North Tongji Road,Tong’an district,

Xiamen City, China.

XIAMEN TAKAM MACHINERY CO., LTD.

When structure is everything, the TA-Series does not disappoint. With one of the widest stance in its class, the machine is more than capable of handling even the toughest cutting jobs the industry has to o�er.

Separate is better

Many machines face overheating and noise

from high voltage amps that are installed in

the electronic cabinets. The TA-Series

machine was designed to avoid all these

problems. By separating all the high voltage

from the low voltage parts, the machine is

able to reduce heat and noise from high

voltage units a�ecting the low voltage units.

Spindle technology

The advanced design of our spindles provides

high axial thrust capability, yet generates

minimal heat. The spindles uses front and rear

pre-load angular bearing with large spacer to

enhance redial stability enabling heavy cuts on

steel. To ensure pro-long life of the spindle

high temperature grease is used to guarantee

smooth operations of the spindle regardless of

operation temperature.

Designed with technology

TA-Series was designed with the most

advance FEM analysis software on the market.

We are able to test our design under many

di�erent stressed conditions. This gives us the

ability to design the TA-Series machine to not

only meet our customers requirements, but to

surpass our customers needs. This gives the

customer more value because of our design.

TA-745/850/1062 Performance Diagrams

TA-745/850 Mitsubishi-Driver

Performance Diagrams-Mitsubishi

TA-1062 (TA-745/850 Optional) Mitsubishi-Driver

0 1500 60000

4.1

5.5

7.5

8000Rotation speed [r/min]

Out

put [

kW] 15-minute rating

]E10-5.7V-JS seires naf htiw rotoM [

Continuous rating

0 1500 45000

5.6

8.37.5

11

6000

Rotation speed [r/min]

15-minute rating

Out

put [

kW]

Continuous rating

[ Motor with fan series SJ-V11-01E]

TA-1062 Mitsubishi-Driver Optional

0 1500 60000

1011

15

8000

Rotation speed [r/min]

Out

put [

kW]

15-minute rating

Continuous rating

[ Motor with fan series SJ-V15-01E]

Performance Diagrams-Siemens

TA-745/850 Siemens-Driver TA-1062 (TA-745/850 Optional) Siemens-Driver

nrated [rpm]

Prated [kW]

Mrated [Nm]

Irated [A]

nmax1 [rpm]

nmax2 [rpm]

nmax3 [rpm]

nmax, Br [rpm]

n2 [rpm]

Mmax

[Nm] Imax [A]

M0 [Nm]

I0 [A]

1500 9.0 57 23.5 9000 12000 - 5000 4500 135 54 63 25

nrated [rpm]

Prated [kW]

Mrated [Nm]

Irated [A]

nmax1 [rpm]

nmax2 [rpm]

nmax3 [rpm]

nmax, Br [rpm]

n2 [rpm]

Mmax

[Nm] Imax [A]

M0 [Nm]

I0 [A]

1500 7,0 45 17,5 9000 12000 - 5000 5250 95 38 52 20

TA-745/850 Fanuc-Driver

Performance Diagrams-Fanuc

TA-1062 Siemens-Driver Optional

nrated [rpm]

Prated [kW]

Mrated [Nm]

Irated [A]

nmax1 [rpm]

nmax2 [rpm]

nmax3 [rpm]

nmax, Br [rpm]

n2 [rpm]

Mmax

[Nm] Imax [A]

M0 [Nm]

I0 [A]

1500 11,0 70 24 8000 10000 11000 4500 4800 140 48 96 30

TA-1062 Fanuc-Driver

0

4

8

12

16

0 3000 6000 9000 12000

1500

7.5kW

0

20

40

60

80

0 3000 6000 9000 12000

1500

11kW

3.7kW

5.5kW

4500

Output[kW ]

15min, S 3 25 %Operating Zone

60minS 3 40 %OperatingZone

Motor speed [min-1]

ContinuousOperating Zone

Torque[N m]

Motor speed [min-1]

ContinuousOperating Zone

15min, S 3 25 %Operating Zone

60min, S 3 40 %Operating Zone

0

5

10

15

20

0 2500 5000 7500 10000

15000

30

60

90

120

0 2500 5000 7500 10000

1500

11kW

7.5kW9kW

3500

Output[kW ]

60minS 3 40 %OperatingZone

15min, S 3 25 %Operating Zone

Motor speed [min-1]

ContinuousOperating Zone

Torque[N m]

Motor speed [min-1]

ContinuousOperating Zone

15min, S 3 25 %Operating Zone

60min, S 3 40 %Operating Zone

TA-745/850/1062 Work Piece Size / Floor Plan Technical Data

Floor Plans

Y-axis

Z-axis

TA-745/850 (110 mm)TA-1062 (150 mm)

Work Piece Size

X-axis

Units TA-745 TA-850 TA-1062

X-Axis mm 700 800 1000

Y-Axis mm 420 520 620

Z-Axis mm 550 550 550

Units TA-745 TA-850 TA-1062

Depth mm 2472 2472 2480

Width A mm 2200 2200 2700

Height Min mm 2260 2260 2290

Width B mm 238 238 238

Height Max mm 2520 2520 2720

Width AWidth B Depth

Hei

ght

TA-745 TA-850 TA-1062

Table

Area of Table (mm) 900 x 450 900 x 500 1000 x 600

Working Area (mm) 700 x 420 800 x 520 1000 x 620

T-Slot (mm) 80 x 18 x 5 80 x 18 x 5 100 x 18 x 5

Work Table Max Weight (kgs) 400 400 800

Travel

X/Y/Z - Axis Travel (mm) 700/420/550 800/520/550 1000/620/550

Spindle Nose to Table surface (mm) 110-660 110-660 150-700

X/Y/Z-Guideway Type Linear Guideway Linear Guideway Linear Guideway

Spindle

Spindle Taper BT40 BT40 BT40

Spindle rpm 8000 8000 8000

Transmission Method

Spindle Motor (kw)-Fanuc 7.5

Three-Axis Motor

X/Y/Z-Axis Servo Motor (kw)-Fanuc 1.8/1.8/3.0BS 1.8/1.8/3.0BS

3-Axis Cutting Feed Rate (mm/min) 10000 10000

3-Axis Rapid Traverse (m/min) 36/36/36 36/36/36

Others

Machine Weight / Gross Weight (kgs) 3800 4000 5000

Control

TA-Series Control Fanuc Oi-MF, Mitsubishi M80A/M80B, Siemens 828D/840D, Heindenhain TNC620/TNC640

Standard

• Enclosed Guard

• Swiveling Control Box

• Low Energy Work Light

• LED 3 Color Warning Light

• Volumetric Type Automatic Lubricator

• Auto Power Off

• Rigid Tapping

• Tool Box

• Leveling Screws & Blocks

• Operation Manual

• Mechanical Oil Coolant Separator

• Air Gun

X/Y/Z-Axis Servo Motor (kw)-Mitsubishi 1.5/1.5/3.0BS 1.5/1.5/3.0BS

Spindle Motor (kw)-Mitsubishi 7.5

7.5

7.5

Spindle Motor (kw)-Siemens 7.0 7.0

Spindle Motor (kw)-Heindenhain 7.5 7.5

Technical Data

11.0

7.5

7.0

7.5

3.0/3.0/3.0BS

10000

36/36/36

3.0/3.0/3.0BS

OptionsTool Changer 16/20/24/30/32•

Spindle Upgrade to Direct Drive 10000/12000/15000 rpm•

Spindle Upgrade Belt Type 10000/12000 rpm•

Spindle Upgrade Built-in 18000/24000 rpm•

Screw Type Chip Conveyor•

Chain Type Chip Conveyor•

Chip Wash System•

Tool measuring system•

Tool breakage system•

Linear Scale•

•

•

Coolant Through Spindle - 6/20/30/50/70 bar.

Air Through Spindle