Embed Size (px)
Citation preview
HIFLEX for indoor use
HIFLEX for outdoor use, waterproof IP68
Kania L.P. · 3330 SHEEHAN DR · LAND O LAKES, FL 34638 · PHONE 813-949-7862 · FAX 813-949-7348 · E-MAIL [email protected]
HIFLEX
HIFLEX is a 12 / 24 Volt LED-strip with 30 to 120 SMD LEDs per meter (≈39”). Depending on the LED number it can be cut every 33.3 mm (≈1.3”), 50 mm (≈2.0") or 100 mm (≈4.0").
With a width of only 7 mm (≈0.28") for single color, 10 mm (≈0.39") for RGB and up to 12 mm (≈0.47”) for the waterproof strip bending around corners is effortless.
For easy mounting HIFLEX has an adhesive tape on the back. With the provided jack and plug HIFLEX can be extended.
Datasheet 06/09 HIFLEX 30 Deco, flexible 12 Volt SMD LED light strip, 30 LED/m (≈ 39”) Voltage 12 V DC Rated Power 2.4 W/m (≈ 39”), 30 SMD-LED Current 200 mA LED 3528 Top Viewing SMD LED Beam Angle 120° LED Distance 33.3 mm (≈ 1.3”) Strip Width 7 mm + 0.5mm (≈ 0.28” + 0.02”) Strip Height 2.7 mm (≈ 0.10) Min. Bend Radius 10 mm (≈ 0.40”) Separable 100 mm (≈ 4.0”) = 3 LED = 0.24 Watt Continuous Length 5 m (≈ 196.8”) Operating Temperature Tested min -20°C, max 60°C (-4°F/140°F) / min -40°C ,max 60°C (-40°F/140°F) Max. Power / Length 50 W / 10 m (≈ 32’) Weight 20.2 g/m (≈ 0.045 lb/39”) IP Rating IP65 Approval CE, RoHS compliancy Features Coated FPCB with adhesive tape on the back for easy mounting on several surfaces. Item No. Description LED-Color 07-3049-40* white FPCB blue white 7500K ± 200K 07-3049-50 white FPCB cool white 5500K ± 200K 07-3049-60 white FPCB neutral white 4200K ± 200K 07-3049-70* white FPCB warm white 3300K ± 200K 07-3049-80 white FPCB extra warm white 2800K ± 200K 07-3049-14 white FPCB red 620-635 nm 07-3049-24 white FPCB green 515-525 nm 07-3049-34 white FPCB blue 460-475 nm 07-3049-44 white FPCB yellow/amber 586-594 nm *On request
HIFLEX 30 can be separated every 100 mm (≈ 4.0”). We deliver HIFLEX in your desired length. On request, we equip HIFLEX with connectors for length extension. HIFLEX LED light strip should be tested with actual components to ensure acceptable performance. Safety Switch off the electricity when carrying out any work on the light, allow light to cool down. ATTENTION: Danger of electric shock. Installation and connection must be carried out by qualified experts. Never connect the light directly to the main voltage without the LED-Converter. No liability will be accepted in the event of improper use, unauthorized modifications or incorrect installation. All Information is subject to change without notice. Errors and omissions excepted. Kania L.P. · 3330 SHEEHAN DR · LAND O LAKES, FL 34638 · PHONE 813-949-7862 · FAX 813-949-7348 · E-MAIL [email protected]
Datasheet 06/09 HIFLEX 60 Power, flexible 12 Volt SMD LED light strip, 60 LED/m (≈ 39”) Voltage 12 V DC Rated Power 4.8 W/m (≈ 39”), 60 SMD-LED Current 400 mA LED 3528 Top Viewing SMD LED Beam Angle 120° LED Distance 16.6 mm (≈ 0.65”) Strip Width 7 mm + 0.5mm (≈ 0.28” + 0.02”) Strip Height 2.7 mm (≈ 0.10) Min. Bend Radius 10 mm (≈ 0.40”) Separable 50 mm (≈ 2”) = 3 LED = 0.24 Watt Continuous Length 5 m (≈ 196.8”) Operating Temperature Tested min -20°C, max 60°C (-4°F/140°F) / min -40°C ,max 60°C (-40°F/140°F) Max. Power / Length 50 W / 10 m (≈ 32’) Weight 21.3 g/m (≈ 0.047 lb/39”) IP Rating IP65 Approval CE, RoHS compliancy Features Coated FPCB with adhesive tape on the back for easy mounting on several surfaces. Item No. Description LED-Color 07-3050-40* white FPCB blue white 7500K ± 200K 07-3050-50 white FPCB cool white 5500K ± 200K 07-3050-60 white FPCB neutral white 4200K ± 200K 07-3050-70* white FPCB warm white 3300K ± 200K 07-3050-80 white FPCB extra warm white 2800K ± 200K 07-3050-14 white FPCB red 620-635 nm 07-3050-24 white FPCB green 515-525 nm 07-3050-34 white FPCB blue 460-475 nm 07-3050-44 white FPCB yellow/amber 586-594 nm *On request
HIFLEX 60 can be separated every 50 mm (≈ 2.0”). We deliver HIFLEX in your desired length. On request, we equip HIFLEX with connectors for length extension. HIFLEX LED light strip should be tested with actual components to ensure acceptable performance. Safety Switch off the electricity when carrying out any work on the light, allow light to cool down. ATTENTION: Danger of electric shock. Installation and connection must be carried out by qualified experts. Never connect the light directly to the main voltage without the LED-Converter. No liability will be accepted in the event of improper use, unauthorized modifications or incorrect installation. All Information is subject to change without notice. Errors and omissions excepted. Kania L.P. · 3330 SHEEHAN DR · LAND O LAKES, FL 34638 · PHONE 813-949-7862 · FAX 813-949-7348 · E-MAIL [email protected]
Datasheet 06/09 HIFLEX 90 High Power, flexible 12 Volt SMD LED light strip, 90 LED/m (≈ 39”) Voltage 12 V DC Rated Power 7.2 W/m (≈ 39”), 90 SMD-LED Current 600 mA LED 3528 Top Viewing SMD LED Beam Angle 120° LED Distance 11.1 mm (≈ 0.43”) Strip Width 7 mm + 0.5mm (≈0.28” + 0.02”) Strip Height 2.7 mm (≈ 0.10) Min. Bend Radius 10 mm (≈ 0.40”) Separable 33.33 mm (≈ 1.3”) = 3 LED = 0.24 Watt Continuous Length 5 m (≈ 196.8”) Operating Temperature Tested min -20°C, max 60°C (-4°F/140°F) / min -40°C ,max 60°C (-40°F/140°F) Max. Power / Length 50 W / 7 m (≈ 23’) Weight 23.8 g/m (≈ 0.052 lb/39”) IP Rating IP65 Approval CE, RoHS compliancy Features Coated FPCB with adhesive tape on the back for easy mounting on several surfaces. Item No. Description LED-Color 07-3051-40* white FPCB blue white 7500K ± 200K 07-3051-50 white FPCB cool white 5500K ± 200K 07-3051-60 white FPCB neutral white 4200K ± 200K 07-3051-70* white FPCB warm white 3300K ± 200K 07-3051-80 white FPCB extra warm white 2800K ± 200K 07-3051-14 white FPCB red 620-635 nm 07-3051-24 white FPCB green 515-525 nm 07-3051-34 white FPCB blue 460-475 nm 07-3051-44 white FPCB yellow/amber 586-594 nm *On request
HIFLEX 90 can be separated every 33.3 mm (≈ 1.3”). We deliver HIFLEX in your desired length. On request, we equip HIFLEX with connectors for length extension. HIFLEX LED light strip should be tested with actual components to ensure acceptable performance. Safety Switch off the electricity when carrying out any work on the light, allow light to cool down. ATTENTION: Danger of electric shock. Installation and connection must be carried out by qualified experts. Never connect the light directly to the main voltage without the LED-Converter. No liability will be accepted in the event of improper use, unauthorized modifications or incorrect installation. All Information is subject to change without notice. Errors and omissions excepted. Kania L.P. · 3330 SHEEHAN DR · LAND O LAKES, FL 34638 · PHONE 813-949-7862 · FAX 813-949-7348 · E-MAIL [email protected]
Datasheet 06/09 HIFLEX 120 Ultra Power, flexible 24 Volt SMD LED light strip, 120 LED/m (≈ 39”) Voltage 24 V DC Rated Power 9.6 W/ m (≈ 39”), 120 SMD-LED Current 800 mA LED 3528 Top Viewing SMD LED LED Distance 11.1 mm (≈ 0.43”) Beam Angle 120° Strip Width 7 mm + 0.5mm (≈ 0.28” + 0.02”) Strip Height 2.7 mm (≈ 0.10) Min. Bend Radius 10 mm (≈ 0.40”) Separable 50 mm (≈ 2”)= 6 LED = 0.48 Watt Continuous Length 5 m (≈ 196.8”) Operating Temperature Tested min -20°C, max 60°C (-4°F/140°F) / min -40°C ,max 60°C (-40°F/140°F) Max. Power / Length 50 W / 5 m (≈ 16’) Weight 25.5 g/m (≈ 0.056 lb/39”) IP Rating IP65 Approval CE, RoHS compliancy Features Coated FPCB with adhesive tape on the back for easy mounting on several surfaces. Item No. Description LED-Color 07-3061-40* white FPCB blue white 7500K ± 200K 07-3061-50 white FPCB cool white 5500K ± 200K 07-3061-60 white FPCB neutral white 4200K ± 200K 07-3061-70* white FPCB warm white 3300K ± 200K 07-3061-80 white FPCB extra warm white 2800K ± 200K 07-3061-14 white FPCB red 620-635 nm 07-3061-24 white FPCB green 515-525 nm 07-3061-34 white FPCB blue 460-475 nm 07-3061-44 white FPCB yellow/amber 586-594 nm *On request
HIFLEX 120 can be separated every 50 mm (≈ 2.0“). We deliver HIFLEX in your desired length. On request, we equip HIFLEX with connectors for length extension. HIFLEX LED light strip should be tested with actual components to ensure acceptable performance.
Safety Switch off the electricity when carrying out any work on the light, allow light to cool down. ATTENTION: Danger of electric shock. Installation and connection must be carried out by qualified experts. Never connect the light directly to the main voltage without the LED-Converter. No liability will be accepted in the event of improper use, unauthorized modifications or incorrect installation. All Information is subject to change without notice. Errors and omissions excepted. Kania L.P. · 3330 SHEEHAN DR · LAND O LAKES, FL 34638 · PHONE 813-949-7862 · FAX 813-949-7348 · E-MAIL [email protected]
Datasheet 06/09 HIFLEX 30 RGB Deco, flexible 12 Volt SMD LED light strip, 30 LED/m (≈ 39”) Voltage 12 V DC Rated Power 7.2 W/m (≈ 39”), 30 RGB SMD-LED Current 600 mA LED 5050 Top Viewing SMD LED Beam Angle 120° LED Distance 33.3 mm (≈ 1.3”) Strip Width 10 mm + 0.5mm (≈0.39” + 0.02”) Strip Height 2.7 mm (≈ 0.10) Min. Bend Radius 10 mm (≈ 0.40”) Separable 100 mm (≈ 4.0”) = 3 LED = 0.72 Watt Continuous Length 5 m (≈ 196.8”) Operating Temperature Tested min -20°C, max 60°C (-4°F/140°F) / min -40°C ,max 60°C (-40°F/140°F) Max. Power / Length 50 W / 7 m (≈ 23’) Weight 33.3 g/m (≈ 0.073 lb/39”) IP Rating IP65 Approval CE, RoHS compliancy Features Coated FPCB with adhesive tape on the back for easy mounting on several surfaces. Item No. Description LED-Color 07-3050-99 white FPCB red 625-635 nm green 520-525 nm blue 465-475
HIFLEX 30 RGB can be separated every 100 mm (≈ 4.0“). We deliver HIFLEX in your desired length. On request, we equip HIFLEX with connectors for length extension. HIFLEX LED light strip should be tested with actual components to ensure acceptable performance.
Safety Switch off the electricity when carrying out any work on the light, allow light to cool down. ATTENTION: Danger of electric shock. Installation and connection must be carried out by qualified experts. Never connect the light directly to the main voltage without the LED-Converter. No liability will be accepted in the event of improper use, unauthorized modifications or incorrect installation. All Information is subject to change without notice. Errors and omissions excepted. Kania L.P. · 3330 SHEEHAN DR · LAND O LAKES, FL 34638 · PHONE 813-949-7862 · FAX 813-949-7348 · E-MAIL [email protected]
Datasheet 06/09 HIFLEX 60 RGB Power, flexible 12 Volt SMD LED light strip, 60 LED/m (≈ 39”) Voltage 12 V DC Rated Power 14.4 W/m (≈ 39”), 60 RGB SMD-LED Current 1200 mA LED 5050 Top Viewing SMD LED Beam Angle 120° LED Distance 16.6 mm (≈ 0.65”) Strip Width 10 mm + 0.5mm (≈ 0.39” + 0.02”) Strip Height 2.7 mm (≈ 0.10) Min. Bend Radius 10 mm (≈ 0.40”) Separable 50 mm (≈ 2”) = 3 LED = 0.72 Watt Continuous Length 5 m (≈ 196.8”) Operating Temperature Tested min -20°C, max 60°C (-4°F/140°F) / min -40°C ,max 60°C (-40°F/140°F) Max. Power / Length 50 W / 3.5 m (≈ 11.5’) Weight 33.8 g/m (≈ 0.075 lb/39”) IP Rating IP65 Approval CE, RoHS compliancy Features Coated FPCB with adhesive tape on the back for easy mounting on several surfaces. Item No. Description LED-Color 07-3060-99 white FPCB red 625-635 nm green 520-525 nm blue 465-475
HIFLEX 60 RGB can be separated every 50 mm (≈ 2.0“).We deliver HIFLEX in your desired length. On request, we equip HIFLEX with connectors for length extension. HIFLEX LED light strip should be tested with actual components to ensure acceptable performance.
Safety Switch off the electricity when carrying out any work on the light, allow light to cool down. ATTENTION: Danger of electric shock. Installation and connection must be carried out by qualified experts. Never connect the light directly to the main voltage without the LED-Converter. No liability will be accepted in the event of improper use, unauthorized modifications or incorrect installation. All Information is subject to change without notice. Errors and omissions excepted. Kania L.P. · 3330 SHEEHAN DR · LAND O LAKES, FL 34638 · PHONE 813-949-7862 · FAX 813-949-7348 · E-MAIL [email protected]
Datasheet 06/09 HIFLEX 30 Deco Waterproof IP68, flexible 12 Volt SMD LED light strip, 30 LED/m (≈ 39”) Voltage 12 V DC Rated Power 2.4 W/m (≈ 39”), 30 SMD-LED Current 200 mA LED 3528 Top Viewing SMD LED Beam Angle 120° LED Distance 33.3 mm (≈ 1.3”) Strip Width 10 mm + 0.5mm (≈ 0.4” + 0.02”) Strip Height 3.5 mm (≈ 0.14) Min. Bend Radius 10 mm (≈ 0.40”) Separable 100 mm (≈ 4.0”) = 3 LED = 0.24 Watt Continuous Length 5 m (≈ 196.8”) Operating Temperature Tested min -20°C, max 60°C (-4°F/140°F) / min -40°C ,max 60°C (-40°F/140°F) Max. Power / Length 50 W / 10 m (≈ 32’) Weight 20.2 g/m (≈ 0.045 lb/39”) IP Rating IP68 Approval CE, RoHS compliancy Features Coated FPCB with adhesive tape on the back for easy mounting on several surfaces. Item No. Description LED-Color 07-30xx-40* white FPCB blue white 7500K ± 200K 07-30xx-50 white FPCB cool white 5500K ± 200K 07-30xx-60 white FPCB neutral white 4200K ± 200K 07-30xx-70* white FPCB warm white 3300K ± 200K 07-30xx-80 white FPCB extra warm white 2800K ± 200K 07-30xx-14 white FPCB red 620-635 nm 07-30xx-24 white FPCB green 515-525 nm 07-30xx-34 white FPCB blue 460-475 nm 07-30xx-44 white FPCB yellow/amber 586-594 nm *On request
HIFLEX 30 can be separated every 100 mm (≈ 4.0”). We deliver HIFLEX in your desired length. On request, we equip HIFLEX with a power supply cable. HIFLEX LED light strip should be tested with actual components to ensure acceptable performance. Safety Switch off the electricity when carrying out any work on the light, allow light to cool down. ATTENTION: Danger of electric shock. Installation and connection must be carried out by qualified experts. Never connect the light directly to the main voltage without the LED-Converter. No liability will be accepted in the event of improper use, unauthorized modifications or incorrect installation. All Information is subject to change without notice. Errors and omissions excepted. Kania L.P. · 3330 SHEEHAN DR · LAND O LAKES, FL 34638 · PHONE 813-949-7862 · FAX 813-949-7348 · E-MAIL [email protected]
Datasheet 06/09 HIFLEX 60 Power Waterproof IP68, flexible 12 Volt SMD LED light strip, 60 LED/m (≈ 39”). Voltage 12 V DC Rated Power 4.8 W/m (≈ 39”), 60 SMD-LED Current 400 mA LED 3528 Top Viewing SMD LED Beam Angle 120° LED Distance 16.6 mm (≈ 0.65”) Strip Width 10 mm + 0.5mm (≈ 0.4” + 0.02”) Strip Height 3.5 mm (≈ 0.14) Min. Bend Radius 10 mm (≈ 0.40”) Separable 50 mm (≈ 2”) = 3 LED = 0.24 Watt Continuous Length 5 m (≈ 196.8”) Operating Temperature Tested min -20°C, max 60°C (-4°F/140°F) / min -40°C ,max 60°C (-40°F/140°F) Max. Power / Length 50 W / 10 m (≈ 32’) Weight 41.7 g/m (≈ 0.092 lb/39”) IP Rating IP68 Approval CE, RoHS compliancy Features Silicone sealed waterproof FPCB Item No. Description LED-Color 07-3052-40* white FPCB blue white 7500K ± 200K 07-3052-50 white FPCB cool white 5500K ± 200K 07-3052-60 white FPCB neutral white 4200K ± 200K 07-3052-70* white FPCB warm white 3300K ± 200K 07-3052-80 white FPCB extra warm white 2800K ± 200K 07-3052-14 white FPCB red 620-635 nm 07-3052-24 white FPCB green 515-525 nm 07-3052-34 white FPCB blue 460-475 nm 07-3052-44 white FPCB yellow/amber 586-594 nm
HIFLEX 60 Waterproof IP68 can be separated every 50 mm (≈ 2.0”).We deliver HIFLEX in your desired length. On request, we equip HIFLEX with a power supply cable. HIFLEX LED light strip should be tested with actual components to ensure acceptable performance. Safety Switch off the electricity when carrying out any work on the light, allow light to cool down. ATTENTION: Danger of electric shock. Installation and connection must be carried out by qualified experts. Never connect the light directly to the main voltage without the LED-Converter. No liability will be accepted in the event of improper use, unauthorized modifications or incorrect installation. All Information is subject to change without notice. Errors and omissions excepted. Kania L.P. · 3330 SHEEHAN DR · LAND O LAKES, FL 34638 · PHONE 813-949-7862 · FAX 813-949-7348 · E-MAIL [email protected]
Datasheet 06/09 HIFLEX 90 High Power Waterproof IP68, flexible 12 Volt SMD LED light strip, 90 LED/m (≈ 39”) Voltage 12 V DC Rated Power 7.2 W/m (≈ 39”), 90 SMD-LED Current 600 mA LED 3528 Top Viewing SMD LED Beam Angle 120° LED Distance 11.1 mm (≈ 0.43”) Strip Width 10 mm + 0.5mm (≈0.4” + 0.02”) Strip Height 3.5 mm (≈ 0.14) Min. Bend Radius 10 mm (≈ 0.40”) Separable 33.33 mm (≈ 1.3”) = 3 LED = 0.24 Watt Continuous Length 5 m (≈ 196.8”) Operating Temperature Tested min -20°C, max 60°C (-4°F/140°F) / min -40°C ,max 60°C (-40°F/140°F) Max. Power / Length 50 W / 7 m (≈ 23’) Weight 23.8 g/m (≈ 0.052 lb/39”) IP Rating IP68 Approval CE, RoHS compliancy Features Coated FPCB with adhesive tape on the back for easy mounting on several surfaces. Item No. Description LED-Color 07-3053-40* white FPCB blue white 7500K ± 200K 07-3053-50 white FPCB cool white 5500K ± 200K 07-3053-60 white FPCB neutral white 4200K ± 200K 07-3053-70* white FPCB warm white 3300K ± 200K 07-3053-80 white FPCB extra warm white 2800K ± 200K 07-3053-14 white FPCB red 620-635 nm 07-3053-24 white FPCB green 515-525 nm 07-3053-34 white FPCB blue 460-475 nm 07-3053-44 white FPCB yellow/amber 586-594 nm *On request
HIFLEX 90 can be separated every 33.3 mm (≈ 1.3”). We deliver HIFLEX in your desired length. On request, we equip HIFLEX with a power supply cable. HIFLEX LED light strip should be tested with actual components to ensure acceptable performance. Safety Switch off the electricity when carrying out any work on the light, allow light to cool down. ATTENTION: Danger of electric shock. Installation and connection must be carried out by qualified experts. Never connect the light directly to the main voltage without the LED-Converter. No liability will be accepted in the event of improper use, unauthorized modifications or incorrect installation. All Information is subject to change without notice. Errors and omissions excepted. Kania L.P. · 3330 SHEEHAN DR · LAND O LAKES, FL 34638 · PHONE 813-949-7862 · FAX 813-949-7348 · E-MAIL [email protected]
Datasheet 06/09 HIFLEX 120 Ultra Power Waterproof IP68, flexible 24 Volt SMD LED light strip, 120 LED/m (≈ 39”) Voltage 24 V DC Rated Power 9.6 W/ m (≈ 39”), 120 SMD-LED Current 800 mA LED 3528 Top Viewing SMD LED LED Distance 11.1 mm (≈ 0.43”) Beam Angle 120° Strip Width 10 mm + 0.5mm (≈ 0.4” + 0.02”) Strip Height 3.5 mm (≈ 0.14) Min. Bend Radius 10 mm (≈ 0.40”) Separable 50 mm (≈ 2”)= 6 LED = 0.48 Watt Continuous Length 5 m (≈ 196.8”) Operating Temperature Tested min -20°C, max 60°C (-4°F/140°F) / min -40°C ,max 60°C (-40°F/140°F) Max. Power / Length 50 W / 5 m (≈ 16’) Weight 25.5 g/m (≈ 0.056 lb/39”) IP Rating IP68 Approval CE, RoHS compliancy Features Coated FPCB with adhesive tape on the back for easy mounting on several surfaces. Item No. Description LED-Color 07-3054-40* white FPCB blue white 7500K ± 200K 07-3054-50 white FPCB cool white 5500K ± 200K 07-3054-60 white FPCB neutral white 4200K ± 200K 07-3054-70* white FPCB warm white 3300K ± 200K 07-3054-80 white FPCB extra warm white 2800K ± 200K 07-3054-14 white FPCB red 620-635 nm 07-3054-24 white FPCB green 515-525 nm 07-3054-34 white FPCB blue 460-475 nm 07-3054-44 white FPCB yellow/amber 586-594 nm *On request
HIFLEX 120 can be separated every 50 mm (≈ 2.0“). We deliver HIFLEX in your desired length. On request, we equip HIFLEX with a power supply cable. HIFLEX LED light strip should be tested with actual components to ensure acceptable performance.
Safety Switch off the electricity when carrying out any work on the light, allow light to cool down. ATTENTION: Danger of electric shock. Installation and connection must be carried out by qualified experts. Never connect the light directly to the main voltage without the LED-Converter. No liability will be accepted in the event of improper use, unauthorized modifications or incorrect installation. All Information is subject to change without notice. Errors and omissions excepted. Kania L.P. · 3330 SHEEHAN DR · LAND O LAKES, FL 34638 · PHONE 813-949-7862 · FAX 813-949-7348 · E-MAIL [email protected]
Datasheet 06/09 HIFLEX 30 RGB Deco Waterproof IP68, flexible 12 Volt SMD LED light strip, 30 LED/m (≈ 39”) Voltage 12 V DC Rated Power 7.2 W/m (≈ 39”), 30 RGB SMD-LED Current 600 mA LED 5060 Top Viewing SMD LED Beam Angle 120° LED Distance 33.3 mm (≈ 1.3”) Strip Width 12 mm + 0.5mm (≈ 0.47” + 0.02”) Strip Height 2.5 mm (≈ 0.1”) Min. Bend Radius 10 mm (≈ 0.40”) Separable 100 mm (≈ 4.0”) = 3 LED = 0.72 Watt Continuous Length 5 m (≈ 196.8”) Operating Temperature Tested min -20°C, max 60°C (-4°F/140°F) / min -40°C ,max 60°C (-40°F/140°F) Max. Power / Length 50 W / 7 m (≈ 23’) Weight 50.0 g/m (≈ 0.110 lb/39”) IP Rating IP68 Approval CE, RoHS compliancy Features Silicone sealed waterproof FPCB
Item No. Description LED-Color 07-3052-99 white FPCB red 625-635 nm green 520-525 nm blue 465-475 HIFLEX 30 RGB Waterproof IP68 can be separated every 100 mm (≈ 4.0“). We deliver HIFLEX in your desired length. On request, we equip HIFLEX with a power supply cable. HIFLEX LED light strip should be tested with actual components to ensure acceptable performance.
Safety Switch off the electricity when carrying out any work on the light, allow light to cool down. ATTENTION: Danger of electric shock. Installation and connection must be carried out by qualified experts. Never connect the light directly to the main voltage without the LED-Converter. No liability will be accepted in the event of improper use, unauthorized modifications or incorrect installation. All Information is subject to change without notice. Errors and omissions excepted. Kania L.P. · 3330 SHEEHAN DR · LAND O LAKES, FL 34638 · PHONE 813-949-7862 · FAX 813-949-7348 · E-MAIL [email protected]
Datasheet 06/09 HIFLEX 60 RGB Power Waterproof IP68, flexible 12 Volt SMD LED light strip, 60 LED/m (≈ 39”) Voltage 12 V DC Rated Power 14.4 W/m (≈ 39”), 60 RGB SMD-LED Current 1200 mA LED 5050 Top Viewing SMD LED Beam Angle 120° LED Distance 16.6 mm (≈ 0.65”) Strip Width 12 mm + 0.5mm (≈ 0.39” + 0.02”) Strip Height 3.5 mm (≈ 0.14) Min. Bend Radius 10 mm (≈ 0.40”) Separable 50 mm (≈ 2”) = 3 LED = 0.72 Watt Continuous Length 5 m (≈ 196.8”) Operating Temperature Tested min -20°C, max 60°C (-4°F/140°F) / min -40°C ,max 60°C (-40°F/140°F) Max. Power / Length 50 W / 3.5 m (≈ 11.5’) Weight 33.8 g/m (≈ 0.075 lb/39”) IP Rating IP65 Approval CE, RoHS compliancy Features Silicone sealed waterproof FPCB
Item No. Description LED-Color 07-3062-99 white FPCB red 625-635 nm green 520-525 nm blue 465-475 HIFLEX 60 RGB Waterproof IP68 can be separated every 50 mm (≈ 2.0“). We deliver HIFLEX in your desired length. On request, we equip HIFLEX with a power supply cable. HIFLEX LED light strip should be tested with actual components to ensure acceptable performance.
Safety Switch off the electricity when carrying out any work on the light, allow light to cool down. ATTENTION: Danger of electric shock. Installation and connection must be carried out by qualified experts. Never connect the light directly to the main voltage without the LED-Converter. No liability will be accepted in the event of improper use, unauthorized modifications or incorrect installation. All Information is subject to change without notice. Errors and omissions excepted. Kania L.P. · 3330 SHEEHAN DR · LAND O LAKES, FL 34638 · PHONE 813-949-7862 · FAX 813-949-7348 · E-MAIL [email protected]
