HEPSIBA SEELI

Mobil: +91-8185800953 E-mail: seelihepsi@gmail.com

December 6, 2017

Dear Sir/Madam,

I am writing to introduce myself to you as post graduate of Andhra University (AU) 2011, Mechanical Engineering with specialization in (CAD/CAM).

My enclosed resume provides you with an overview of my nine (9) years of industrial, research, teaching and educational experience. I am currently working as Assistant Professor at BITS Vizag engineering- College teaching Mechanical Engineering courses and facilitating laboratory. In the past, I worked as a Research Assistant in the E-Foundry Lab at IIT Bombay. My work at IIT-B gave me an opportunity to understand the recent developments in metal casting, especially related to casting design and simulation. My responsibility was to create 3D CAD model based process animations, properties, data about different casting alloys, journaling technical papers. I also worked as a Research Assistant in the Biomedical Engineering and Technology center (BETiC) at IIT Engineering Bombay (funded by the Rajiv Gandhi Science and Technology Commission of the Government of Maharashtra, Mumbai, along with the Department of Science and Technology, New Delhi). The goal of this research is to facilitate rapid translation of innovative ideas from expert surgeons into high-quality low-cost healthcare devices for indigenous manufacturing and use.

Prior to my research career, I worked at Sanketika Vidya Parishad, (A Group of Educational Institutions Visakhapatnam, Andhra Pradesh), polytechnic college. I was initially offered a Lecturer Position that soon translated into a Head of the Department for Mechanical Engineering. Later, I was transferred to the Engineering College as an assistant Professor. I taught subjects such as: Engineering Drawing, Manufacturing Process, Machine Drawing, Kinematics of Machinery and Metrology.

My professional career began at the end of my Bachelors degree, I was selected for a job through my engineering college on-campus interview. It was my first interview that made me start my career as an Engineering Design team member for Tipton Intellectual Property Operation PVT, LTD. Hyderabad, A.P, India. I worked for 1 year and I am involved in designing and developing intellectual property drawings using Multimedia COREL-DRAW. It is my passion for problem solving skills and creative thinking that motivated me to continue my education, teaching and research career.

I am skilled in using packages like Solidworks, AutoCAD, ANSYS, CATIA, Unigraphics, and COREL-DRAW. With fresh and foremost research and academic knowledge from IIT Bombay, M-Tech from AU, teaching experience at polytechnic and engineering college and a perfectly blended hands-on experience as a design engineer, I consider myself as a motivated candidate for Research.

Thank you very much for your review and kind consideration and looking forward to hearing from you soon.

Yours sincerely,

Hepsiba Seeli

HEPSIBA SEELI

D/o SATYANARAYANA

43-12-1, JJ Towers, Subhlakshmi Nagar,

Railway New colony,

VISAKHAPATNAM. 530016

Contact No: +91-8185800953 E-mail: seelihepsi@gmail.com

Educational Qualifications:

Qualification College/Institute University/Board Year of pass Remarks

M.E

(CAD/CAM)

A.U. ENGINEERING CAMPUS A.U 2011

(DISTINCTION)

B.Tech(MECH) GMR Institute of Technology JNTUH 2007 First class

INTER Pavani Jr College ,VSKP BOI 2003 First class

SSC Nalanda Residential School, VSKP SSB 2001 First class

Details of Research Work Experience:

The following are DST projects supported by

a) National Knowledgege Network Mission- Delhi

b) Rajiv Gandhi Science and Technology Commission of the Government of Maharashtra.

Post

held

Organization Reference Links

Research

Assistant

IITBombay, E-Foundry lab, Mechanical Department efoundry.iitb.ac.in

Research

Assistant

IITBombay, Biomedical Engineering and Technology

center(BETiC), Mechanical Department

orthocad.iitb.ac.in

Details of Teaching/Industrial Experience:

Post held Organization

Design Engineer Tipton Intellectual Property Operation, PVT. LTD., Hyderabad (MNC

company: Legal Advances, LLC. Chicago, IL USA)

Lecturer and I/C HOD Sanketika Polytechnic College,VSP

Assistant Professor Sanketika Vidya Parishad,VSP

Assistant Professor PydahKaushik Engineering College,VSP

Assistant Professor Baba Institute of Technology and Sciences

Computer Skills:

Languages known Packages known

C

HTML

SOLID WORKS

AUTOCAST

AUTOCAD

UNIGRAPHICS, AutoCAD, CATIA

Courses/Laboratory handled:

B.Tech

Courses Taught Labs handled

i) Engineering Drawing i) Mechanics of solids

ii) Manufacturing Process ii)Heat Transfer

iii) Engineering Mechanics iii)Metrology

iv) Mechanics Of Solids v) Engineering Workshop

v) Production Technology vi)Simulation

vi) Theory of Machines

vii) Unconventional Machining Processes

viii) ROBOTICS

ix) Automation in Manufacturing

x) Metrology

Publications/ Journals/Conferences:

1) International Journal of scientific progress and research IJSPR in volume -15, No-02, Sep 2015,

Spray Characteristics of Diesel and Ethanol blends at ambient conditions by

Schlieren Photography technique. (IJSPR approved and recommended by Ugc)

2) Internal Conference On Recent Trends in Engineering Science and Management-

ICRTESM/VCET/April/ 492, Utilization of Engine’s Waste Heat in A.C. System of an

Automobile.

3) 3rd International Conference on Recent Innovations in Science, Engineering and Management

(ICRISEM-16), Utilization of Losses in the Heat Engine to Increase the Amount of

Useful Power, http://data.conferenceworld.in/SVCET/P742-748.pdf.

4) International Journal of scientific engineering research, Volume 6, Issue 12, December 2015,

ISSN 2229-5518. “Performance Analysis of Bajaj 125 cc Engine with supercharging, a

Single Cylinder SI Engine” (IJSER approved and recommended by Ugc, Thomson

Reuter indexed Journal)

5) International Journal of Innovative Research in Science, Engineering and Technology (An ISO

3297: 2007 Certified Organization) Vol. 5, Issue 5, May 2016. “Design Aspects &

Manufacturing of Blade Types in Aero Engine” (IJIRSET approved and

recommended by Ugc)

6) International Journal of Scientific & Engineering Research, Volume 7, Issue 5, may-2016, ISSN

2229-5518. ”Designing and Analysis of Cryogenic Storage Vessels”. (IJSER approved

and recommended by Ugc, Thomson Reuter indexed Journal).

7) CONFERENCE PROCEEDINGS in Open Journal of Technology & Engineering

Disciplines (OJTED) Vol. 2, No. 4, December 2016, pp. 439 ~452 ISSN: 2455-6971.

“Analytical Solutions for Structural Analysis of Cylindrical Shells”

8) CONFERENCE PROCEEDINGS in Open Journal of Technology & Engineering

Disciplines (OJTED) Vol. 2, No. 4, December 2016, pp. 53~61 ISSN: 2455-6971 ”Design

and Functionality of Metal Collecting Robot”.

9) International Journal & Magazine of Engineering, Technology, Management and Research, ISSN

No:2348 - 4845(Online) “Static and Vibrational Analysis on Automobile Composite

Seat”

10) Journal of The Institution of Engineers (India): Series D Metallurgical & Materials and

Mining Engineering ISSN 2250-2122 J. Inst. Eng. India Ser. D, DOI 10.1007/s40033-017-0146-z

“Experimental Investigations on Thermal Conductivity of Fenugreek and Banana

Composites”-SPRINGER

Workshops/Seminars Attended

i) “Idea to reality -Engineering Applications in Medical device development,” Seminar

on Recent Trends in Reverse Engineering, IIT Mumbai Workshop, May 2014.

ii) Imaginarium is India's largest Rapid Prototyping and Rapid Manufacturing Center-BETiC

team visited for workshop on rapid prototyping, 24th july 2014

iii) Biodesign process ,InnAccel DY Patil University, Mumbai, Maharashtra - 2 days workshop

held on 4th and 5th July, 2014

iv) Workshop at Andhra University- TEQUIP Networking Program, Tool design and its

applications - March 2009

v) Workshop at Andhra University- TEQUIP Networking Program, Intelligent Manufacturing -

March 2009

Training Programs attended:

i) A Two Day E-Foundry teacher training program at VJTI, Matunga, MUMBAI in October 2013.

ii) Biomedical device Manufacturing, IIT Bombay, Maharashtra on 30th June 2014.

iii) Surgical Advancements in Laparoscopy at Center of Excellence for Minimal Access Surgery

Training (CEMAST), Mumbai, Maharashtra 25th August.

iv) Medical Device Innovation Project Review and Roadmap, Victor Menezes Convention Centre,

IITBombay, 20th April 2014.

v) ’The golden Spiral’ in FC Kohli Auditorium, IITBombay on 12th March 2014.

Achievements:

i) Secured First Prize- Mech Utsav at Regency College of Engineering, Fabrication and

Simulation of Automated Lathe (State level) - March 2007.

ii) Received a momentum for successfully organizing Technovanza 2015 IE event at Pydah

Kaushik College of engineering, Visakhapatnam.

Other Details:

i) E-Foundry User Manual: Chapter 5 “Casting Alloy Database”.

Details of Academic Projects:

Masters in Engineering Project:

Buckling Analysis of a Composite Shell (Under the Guidance of Dr. A. RAMAKRISHNA,

Professor Dept. of Mechanical Engineering, Andhra University College of Engineering, VSP)

Designed and developed composite cylindrical pressure Vessels for marine and aerospace

applications

Composite material properties are selected based on operating pressure range, performance and

weight

The lower the weight, the better the pressure vessel. One way of lowering the overall weight is to

reduce the weight of the shell structure

Stacking sequence and the fiber angle arrangement is crucial to the strength and performance of

composite material

Comparisons were made using two approaches: Finite element model and theoretical model

Cylindrical pressure vessel was modeled and analyzed using 3-D Finite element technique using

ANSYS-12.0

Factors considered are stiffness, buckling load and weight to optimize composite material for the

shell

Static analysis and buckling analysis were performed on composite pressure vessel for minimum

mass under strength constraint

B.Tech Project:

Fabrication and Simulation of Desktop model CNC lathe machine

Designed a computer model of CNC lathe using Pro/E

Developed a G & M Code (Preparatory and miscellaneous functions) for Lathe to enable motor

controller communication through process plan.

Recommended: prof.b.ravi@gmail.com 09819817510

Professor B.Ravi, Mechanical Department, IIT Bombay, Powai ,Mumbai 400076

(HEPSIBA SEELI)