1

HENCON TRANSVERS PT-16

HENCON TRANSVERS PT-16

Mobile vehicle for comfortable and safe transportation of personnel in underground mines. Overall design and technical features ensure high maneuverability and reliability of the machine underground in the chemically aggressive environment at temperatures of - 35 °C to +35 °C and relative humidity up to 100%. TransVers PT-16 complies with international safety standards underground conditions. TransVers PT-16 is an articulated vehicle with full-time four-wheel drive system. The cabin for comfortable and safe transportation of personnel is on the rear frame. • closed operator cabin with dust air filter • two-stage engine air filter • Murphy engine oil-level sight glass instead of dipstick • quick-release couplings for filling of engine and hydraulic oil • autonomous fire suppression system

2

ENGINE

Deutz TCD2013 L04 2V

Emission class

EC Step III A and Tier 3

Max power output

126 KW @ 2300 rpm

No. of cylinders

4

Swept volume

4761 cm³

Max torque

670 Nm

Fuel tank

200 liters

A closed circuit design, an ideal solution for a long and trouble free lifetime. Dual speed range hydrostatic drive

between axles emulatuion. Each drive axle has its separate drive circuit: one hydraulic motor and one pump.

Make

Brevini

Model

BZ3-340

TRAVEL PUMPS

Make

Linde

Model

HPV210

Type

Variable displacement axial piston pump

TRAVEL MOTOR

Make

Linde

Model

HMV210

AXLES

Model

Kessler D71

Axle front

Planetary type rigid

mounted

Axle rear

Planetary type

rigid mounted

BRAKE SYSTEM

Service brake

Dual circuit, multi disk wet type on both axles, hydraulically applied via proportional modulating valve

Emergency brake

Hand operated, spring

applied and hydraulic

release

STEERING

Central steering with dual cylinders Integrated cushion valves Orbitrol valve actuation Hydraulic accumulator Manual override for towing

ELECTRICAL EQUIPMENT

Voltage

24 VDC

Batteries

12 V, 105 A/h

Alternator

100 A

The internal dimensions of the cabin

3520x200x1480 mm

Passenger-carrying capacity

16- seater cabin* (+3 in the front cabin incl. driver)

*12 or 20 seats optional

Operator's cabin The machine has a comfortable three seat cabin with good visibility of the working area. The air ventilation system includes a heater and a windscreen demister function. The cabin is equipped with ROPS / FOPS. The machine has a multi-functional display that allows the operator to see all the machine informa- tion. The driver`s seat has a suspension, a safety belt and the seat has 8 ments.

TECHNICAL PARAMETERS

HYDROSTATIC DRIVE SYSTEM

HYDRAULIC PUMP DRIVE GEAR

FUNCTIONAL PARAMETERS

DIMENSIONS AND MANOEUVRABILITY

DIMENSIONS AND MANOEUVRABILITY

Length 7966 mm Max speed 25 km/h Width 2200 mm Gradient 15° Height 2440 mm Steering angle 50°

Grounf clearance 376 mm Operating weight 16500 kg

Turning radius outer 5650 mm Capacity 7000 kg Turning radius inner 2900 mm Tyres 12.00 x 20