Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Wall: Helsinki Black Matt Glazed22x145mm on 296x300mm
A selection of distinctive neutral colours in small format glazed porcelain, suitable for both wall & floor application, the Helsinki Mosaic series is ultra-contemporary and super sophisticated.
helsinki
Wall: Helsinki Navy Matt Glazed22x145mm on 296x300mm
Material: Glazed porcelain
Edge: Pressed
Surface finish: Matt
Application: Wall, Floor, and Feature
Nominal sizes: Chip Size: 48x48mm, 45x145mm, and 22x145mm
Slip resistance 48x48mm : Oil-wet inclining platform test: R10
10 Year Warranty
Product Specifications
Wall: Helsinki Black Matt Glazed22x145mm on 296x300mm
Floor: Helsinki Black Matt Fullbody48x48mm on 306x306mm
stocked
White Matt Fullbody48x48mm on 306x306mm
Black Matt Fullbody48x48mm on 306x306mm
Grey Matt Fullbody48x48mm on 306x306mm
Wall: Helsinki White Matt Glazed45x145mm on 291x297mm
stocked
White Matt Glazed45x145mm on 291x297mm
Black Matt Glazed45x145mm on 291x297mm
Grey Matt Glazed45x145mm on 291x297mm
Navy Matt Glazed45x145mm on 291x297mm
Floor + Wall: Helsinki Grey Matt Glazed22x145mm on 296x300mm
stocked
White Matt Glazed22x145mm on 296x300mm
*also available in gloss*
Navy Matt Glazed22x145mm on 296x300mm
Grey Matt Glazed22x145mm on 296x300mm
Black Matt Glazed22x145mm on 296x300mm
mosaicinstallation guideGENERALDry lay your mosaic tiles prior to installation. Any quality issues should be brought to our attention prior to fixing. Delivered product may vary from showroom samples, fixing of the product constitutes as acceptance of the product. Please refer to National Tiles customer care instructions.
CUTTING• Cut mosaics with a wet saw using a diamond blade. Cut mosaics slowly using multiple
passes, increasing the depth with each pass.
SEALING• Sealing of natural stone or marble is required, this will protect against staining.• Apply a coat of penetrating sealer undiluted using a dry absorbent white cloth or
lambswool applicator. Allow 30 – 45 minutes for the first coat to dry, then apply a second coat. Any sealer that does not penetrate the surface should be wiped off within 15 – 30 minutes of application using a dry absorbent cloth. It is important that no water comes into contact with the newly sealed tiles for at least 24 hours after application.
GROUTING• Apply a premium grade thin-set mortar using a 4 mm V-notch trowel for small mosaics or
6 mm Square-notch trowel for large mosaics.• Set tiles, apply pressure or tap the surfaces with a rubber grout float to ensure all tiles are
bonded and aligned properly. Use a level periodically to check the grout joints.• Mix and apply grout. For mosaic tiles with a metallic glaze finish use unsanded grout to
prevent surface abrasion. • Clean all excess grout immediately with a damp sponge. • After 12 hours polish any remaining grout haze with a clean dry cloth.
CLEANING AND MAINTAINING MOSAICS• Do not use abrasive cleaners or harsh chemicals.• Use all-purpose cleaner recommended and safe for use on your mosaics.
DISCLAMERNo claim will be accepted after installation of the product. All tiling must be undertaken in accordance to AS 3958.1 “Guide to the installation of ceramic tiles”.
helsinkistocked lines
Colour Finish SizeWhite Matt Glazed
Matt Fullbody
45x145mm22x145mm48x48mm
Grey Matt Glazed
Matt Fullbody
45x145mm22x145mm48x48mm
Black Matt Glazed
Matt Fullbody
45x145mm22x145mm48x48mm
Navy Matt Glazed 45x145mm22x145mm