33
Training Catalogue for Automation & Control Malaysia 20 20 20 2016 16 16 16 helping you easily select the right training Industrial Training Catalogue MY_2015 0 S V2016.0.1

helping you easily select the right training Malaysia 2016 · PDF filehelping you easily select the right training ... into Vijeo Citect / CitectSCADA project design and ... with Vijeo

  • Upload
    lythuy

  • View
    228

  • Download
    3

Embed Size (px)

Citation preview

Page 1: helping you easily select the right training Malaysia 2016 · PDF filehelping you easily select the right training ... into Vijeo Citect / CitectSCADA project design and ... with Vijeo

Training Catalogue for Automation & Control

Malaysia

2020202016161616

helping you easilyselect the right training

Industrial Training Catalogue MY_20150SSSS

V2016.0.1

Page 2: helping you easily select the right training Malaysia 2016 · PDF filehelping you easily select the right training ... into Vijeo Citect / CitectSCADA project design and ... with Vijeo

Content

Page 2Schneider Electric Training

Page 3About The Training Offer

Page 4Plant Solution Courses

Page 13Drive Technology & System Courses

Industrial Training Catalogue MY_20151SSSS

Page 18Machine Solution Courses

Page 26Training Calendar

Page 29Training Centre

Page 30Registration Information

Page 31Training Registration Form

Page 3: helping you easily select the right training Malaysia 2016 · PDF filehelping you easily select the right training ... into Vijeo Citect / CitectSCADA project design and ... with Vijeo

Schneider Electric Training

We are proud to present the new training catalog on behalf of Schneider Electric. Thiscatalog has been designed and reviewed to ensure that it reflects our latest wide range oftraining and development.

Specialized On–Site TrainingIf attending a schedule courses is a problem or if you need a specifictype of training not offered as a scheduled course, a customized on-site courses may be an option.

Our trainers can provide on-site training of a standard course, tailor a

Benefit of Schneider Electric Training Include:● Hands-on training with maximum skill set building.● Expert instruction directly from manufacturer ensures accurate, up

to date material to make maximum use of your valuable time.● Many regional local branches located throughout the country to

minimize travel costs.● Professional simulation equipment ties classroom to real world

application , so it’s easy to apply what you have learn when youget back to work.

Industrial Training Catalogue MY_20152SSSS

Our trainers can provide on-site training of a standard course, tailor acourse based on upon selected modules from several standardcourses, or develop a custom training courses based on yourapplication, specific hardware or others system requirement.

To organise an on site customised course, please contact us at +603 7883 6333 andrequest for a FREE proposal.

To facilities the timely scheduling for your course, please plan ahead and allowsufficient advance notice since our training schedules are completed months inadvance.

Schneider Electric Education PartnershipSchneider Electric Educational Partnership are offered to local colleges anduniversities to build a working relationship with respect to industrial automation.Through the use of “hand-on” skills building training materials and innovations insimulation equipment, these courses are easily customised for a broad range ofapplications.

Courses are continually modified to include currentequipment, terminology and standards. They allowparticipants to develop technical skills in theprogramming and maintenance of automation controls.

Page 4: helping you easily select the right training Malaysia 2016 · PDF filehelping you easily select the right training ... into Vijeo Citect / CitectSCADA project design and ... with Vijeo

About The Training Offer

The Schneider Electric Industry Business Training Teams design and deploy trainingcourses on the following active offers:

Plant Solutions Courses: ● PLC & Distributed IO Offer ● Software (Unity Pro, Vijeo Citect, ...)

Drive Technology & Systems Courses: ● Variable Speed Drives (ATV) & Starters (ATS)● Motion Controller (Lexium)● Applications

Machine Solutions Courses: ● Controllers● Sensors

Industrial Training Catalogue MY_20153SSSS

Basic

Intermediate

Advanced

Training Levels Depending on your knowledge and interests, different levels of training courses are possible: Basic, Intermediate, Advanced.

●The idea is to discover the principle or the range of a product or solution. Dedicated to newcomers.

●With this level of training you will learn how to set up the product and implement a simple application. Prerequisites may be required.

●The idea with Advanced level training courses is to discover all the functions of the product and how to implement that product in a concrete application or solution. A good knowledge of the products is often required to participate in these courses. Specific conditions may apply.

● Sensors● Software (Vijeo Designer, SoMachine,…)

Service Training Courses:● Courses dedicated to services (Maintenance, Upgrades, …).

Page 5: helping you easily select the right training Malaysia 2016 · PDF filehelping you easily select the right training ... into Vijeo Citect / CitectSCADA project design and ... with Vijeo

Control Activity

Unity Pro Configuration PUNITY p 5

Quantum Ethernet Remote I/O PQEIO p 6

M580 Configuration PM580 p 7

Quantum & Premium Hot Standby HOT25 p 8

M580 Hot Standby Configuration PM580HOT p 9

Vijeo Citect / CitectSCADA Configuration PCITECTCONF p 10

Intermediate

Plant Solution Courses

Advanced

Advanced

Advanced

Intermediate

Advanced

Operations & Optimisation

Industrial Training Catalogue MY_20154SSSS

p 10

Principles of Ethernet Networking CT2-SE p 11

PlantStruxure Certified Engineer PSXCE p 12

Intermediate

Intermediate

General Networking

Plant Solution Certifications

Page 6: helping you easily select the right training Malaysia 2016 · PDF filehelping you easily select the right training ... into Vijeo Citect / CitectSCADA project design and ... with Vijeo

Unity Pro Configuration

> Course Objective● This course is designed to introduce the student to the fundamentals of the Unity programming

package through a combination of lessons and hands-on exercises. Upon completion of thiscourse students will be ready to start creating PLC applications using the Unity ProProgramming package.

> Training Content● Software Overview, User creation and Security.

● PLC Configuration (Offline), Variables & Data types.

● Unity Program Structure (Sections and Execution).

● Function Library Management.

● Ladder Diagram (LT).

● Structured Text (ST).

● Instruction List (IL).

● Sequential Function Chart Programming (SFC).

> Target Audience● Engineering and maintenance skill trades personnel who are involved

with developing or maintain control system and their applicationprograms using Unity Pro software.

PUNITY

In Class

4-10 Trainees

2 days

Intermediate

Industrial Training Catalogue MY_20155SSSS

● Sequential Function Chart Programming (SFC).

● Function Block Diagrams (FBD).

● Simulation & Animation.

● Derived Function Blocks (DFB), Derived Data Types.

● Operator Screens.

● Trending Tool.

● LL984 Editor.

> Prerequisites● Students attending this course should have a fundamental

understanding of PLCs and PLC programming. This course does notexplain basic concepts but concentrates on using the Unity Proprogramming tool.

> Application Devices and Software● Training Panels:

● None (PC Simulator).

● Software Used:

● Unity Pro.

> Additional Notes● Trainees must bring their laptops.

2 days

40% Theory

60% Hands-On

RM 2,000 per participant

Page 7: helping you easily select the right training Malaysia 2016 · PDF filehelping you easily select the right training ... into Vijeo Citect / CitectSCADA project design and ... with Vijeo

Quantum Ethernet Remote I/O

> Course Objective

● Learn how to plan & configure Quantum Ethernet Remote I/O Architectures, understand the components of the offer, and be able to implement QERIO in a real scenario.

> Training Content● Configure a Simple Ethernet I/O Architecture with 140 CRP 31200 and

140 CRA 31200 under Unity Pro.

● Implement X80 Remote I/O Drops.

● Understand the principle of a high capacity architecture with Dual Ring Switches (DRS) & integrate Sub-Rings.

● Work with the new 140 NOC 78000 and 140 NOC 78100.

● Make Distributed I/O participate in the Remote I/O Network without losing performances.

> Target Audience● Engineering and maintenance skill trades personnel who are involved

with developing or maintain control system and their application programs using Unity Pro software.

Advanced

PQEIO

In Class

4-10 Trainees

2 days

Industrial Training Catalogue MY_20156SSSS

losing performances.

● Monitor the network status with ConneXium Network Manager.

● Understand the determinism and calculate application response time.

● Compare the performances with S908 Remote I/O.

● Implement a Hot Standby Architecture.

> Prerequisites● You should have a working knowledge of Unity Pro and the Quantum

Offer.

● Unity Pro Configuration course (PUNITY).

> Application Devices and Software● Training panel:

● Quantum HSBY CPU.

● X80 Remote I/O and STB Dist. I/O.

● Dual Ring Switches.

● Software Used:

● Unity Pro .

> Additional Notes● Trainees must bring their laptops with Unity

Pro already installed to participate in the training.

2 days

40% Theory

60% Hands-On

RM 2,800 per participant

Page 8: helping you easily select the right training Malaysia 2016 · PDF filehelping you easily select the right training ... into Vijeo Citect / CitectSCADA project design and ... with Vijeo

M580 Configuration

> Course Objective

● Discover the new M580 ePAC,the core components & characteristics of the offer. ImplementRemote I/O (RIO) and Distributed I/O (DIO). Understand the new important features of UnityPro V8.0. Integrate Serial devices within a Remote I/O architecture. Explore the new HART andWeighing modules that form part of the M580 offer. Implement System Time Stamping toprovide Sequence of Event alarm analysis.

> Training Content● Identify the components that comprise the M580 PAC offer.

● Integrate Local, Remote and Distributed I/O with the M580.

● Implement a Simple Daisy Chain Architecture under Unity Pro.

● Configure the M580 / X80 HART offer .

● Deploy the M580 Weighing offer.

● Identify the benefits of deploying system Time Stamping.

Advanced

PM580

In Class

4-10 Trainees

2 days

> Target Audience● Engineering and maintenance skill trades personnel who are involved

with developing or maintain control system and their applicationprograms using Unity Pro software.

Industrial Training Catalogue MY_20157SSSS

> Application Devices and Software● Training Panels:

● M580 Simulators.

● Software used:

● Unity Pro and Advantys.

● Vijeo Citect .

● Prove legacy migration by implementing Premium I/O within an M580 Architecture.

● Identify the importance of Cyber Security.

> Prerequisites● Basic knowledge of Unity Pro & Industrial Networking.

● Unity Pro Configuration course (PUNITY).

> Additional Notes● Trainee must bring their laptop with a valid

licence of Unity Pro V8.0 or at least 20Gb free hard disk for a Virtual Machine.

2 days

50% Theory

50% Hands-On

RM 2,500 per participant

Page 9: helping you easily select the right training Malaysia 2016 · PDF filehelping you easily select the right training ... into Vijeo Citect / CitectSCADA project design and ... with Vijeo

Quantum & Premium Hot Standby> Course Objective

● Provide an overview of the capabilities of the Quantum and Premium Hot Standby.

> Target Audience● Everyone who wants to discover the Premium Hot Standby offer.

> Training Content● System Usage & Behavior.

● Unique Value Proposition & Advantages.

● Hot Standby Technical Description.

● HSBY Software Setup & Configuration.

● HSBY Operation & Switchover.

● Maintaining & Troubleshooting the System.

Advanced

HOT25

In Class

4-10 Trainees

1 days

Industrial Training Catalogue MY_20158SSSS

> Prerequisites● Basic knowledge of Unity Pro.

● Unity Pro Configuration course (PUNITY).

> Application Devices and Software● Training Panels:

● Quantum PLC.

● Premium PLC.

● Software Used:

● Unity Pro.

1 days

60% Theory

40% Hands-On

RM 2,000 per participant

> Additional Notes● Trainees must bring their laptops with Unity

Pro already installed to participate in the training.

Page 10: helping you easily select the right training Malaysia 2016 · PDF filehelping you easily select the right training ... into Vijeo Citect / CitectSCADA project design and ... with Vijeo

M580 Hot Standby Configuration> Course Objective

● Discover the new M580 high end ePAC,the core components & characteristics of the offer.Implement Remote I/O (RIO) and Distributed I/O (DIO). Understand the new important featuresof Unity Pro V11. Integrate Serial devices within a Remote I/O architecture. Implement SystemTime Stamping to provide Sequence of Event alarm analysis with HSBY ePAC.

> Training Content● Identify the components that comprise the M580 HSBY PAC offer.

● Integrate Local, Remote and Distributed I/O with the M580 HSBY.

● M580 redundancy switchover behaviour and diagnostics.

● M580 HSBY online module replacement.

● Implement a Simple Daisy Chain Architecture under Unity Pro.

● Identify the benefits of deploying system Time Stamping.

Advanced

PM580HOT

In Class

4-10 Trainees

2 days

> Target Audience● Engineering and maintenance skill trades personnel who are involved

with developing or maintain control system and their applicationprograms using Unity Pro software.

Industrial Training Catalogue MY_20159SSSS

> Application Devices and Software● Training Panels:

● M580 Simulators.

● Software used:

● Unity Pro and Advantys.

● Vijeo Citect .

● Prove legacy migration by implementing Quantum I/O within an M580 Architecture.

● Identify the importance of Cyber Security.

> Prerequisites● Basic knowledge of Unity Pro & Industrial Networking.

● Unity Pro Configuration course (PUNITY).

● M580 Configuration

> Additional Notes● Trainee must bring their laptop with a valid

licence of Unity Pro V11 or at least 20Gb free hard disk for a Virtual Machine.

2 days

50% Theory

50% Hands-On

RM 2,500 per participant

Page 11: helping you easily select the right training Malaysia 2016 · PDF filehelping you easily select the right training ... into Vijeo Citect / CitectSCADA project design and ... with Vijeo

Vijeo Citect / CitectSCADAConfiguration > Course Objective

● Gain insight into Vijeo Citect / CitectSCADA project design and become familiar withconfiguration techniques. Learn how to design a project from start to finish and configurevarious features, including the new equipment hierarchy. This interactive course includespractise with plant control, data collection, trending and reporting.

> Training Content● Day one involves introduction to the various components of Vijeo Citect /

> Target Audience● Individuals who wants to become familiar with Vijeo Citect /

CitectSCADA project development techniques.

● Vijeo Citect / CitectSCADA users including engineering staff, maintenance staff and plant supervisors.

● Technical users who maintain and improve their installed Vijeo Citect / CitectSCADA control systems.

● Managers who want more than a basic understanding of Vijeo Citect / CitectSCADA.

● Vijeo Citect / CitectSCADA system integrators and designers.

PCITECTCONF

In Class

4-10 Trainees

3 days

Intermediate

Industrial Training Catalogue MY_201510SSSS

● Day one involves introduction to the various components of Vijeo Citect / CitectSCADA, project design, communication, equipment and graphics.

● Day two implementation various areas of the Vijeo Citect / CitectSCADAproject design, including controls and alarms.

● Day three continues with the project design elements of Vijeo Citect / CitectSCADA and introduces methods of reporting and monitoring the system.

> Prerequisites● It is essential that students are familiar with Microsoft Windows

operating systems. Experience in PLC control system design and/or programming is desirable.

> Additional Notes● Trainees must bring their laptops.

3 days

30% Theory

70% Hands-On

RM 2,200 per participant

> Application Devices and Software● Training Panels:

● None.

● Software Used:

● Vijeo Citect / CitectSCADA.

Page 12: helping you easily select the right training Malaysia 2016 · PDF filehelping you easily select the right training ... into Vijeo Citect / CitectSCADA project design and ... with Vijeo

Principles of Ethernet Networking> Course Objective

● This course will introduce participants to the principles of Industrial Networks. At the end of thiscourse participants will have a sound understanding of a variety of industrial protocols alongwith TCP/IP routing, network security and an introduction to network diagnostic tools.

> Training Content● History and Standards.

● Physical Installation.

● Layer 2 - Data Link Layer.

● Network Equipment.

● TCP/IP.

> Target Audience● Product Manager or Technical Support Engineer assigned to be a

Team Trainer or a Mentor on this subject.

CT2-SE

In Class

4-10 Trainees

3 days

Intermediate

Industrial Training Catalogue MY_201511SSSS

● TCP/IP.

● Industrial Protocols.

● TCP/IP Routing.

● Traffic Control and Availability.

● Network Management and Security.

● Diagnostic Tools.

> Prerequisites● None

> Additional Notes● Trainee CAN bring their laptop, (Admin rights

are required.)

● The first day of this course is equivalent to the “Introduction to Ethernet and TCP/IP” training

3 days

50% Theory

50% Hands-On

RM 2,000 per participant

�Application Devices and Software● Laptop with Ethernet connection.

Page 13: helping you easily select the right training Malaysia 2016 · PDF filehelping you easily select the right training ... into Vijeo Citect / CitectSCADA project design and ... with Vijeo

Certified Engineer

> Certification Objective

● The PlantStruxure™ Certified Engineer (PSXCE) program provides a framework for individuals, and for organisations, to qualify against the core competencies necessary for the implementation of solutions based on the Schneider Electric PlantStruxure™ architecture.

> Who can be certified?

● The PSXCE program is open to any automation engineer who has obtained the relevant training and professional experience in one or more of the core specializations of the PlantStruxure architecture.

> How to get certified?

● Certification is issued to engineers with expertise on the Schneider Electric PlantStruxure architecture, confirmed by passing the certification exam.

The PSXCE program comprises of two levels of certification; Professional and Engineer .

Professional Certifications are introductory level certifications that are predominantly based on product offers, and are the first stage towards the full Engineer certification. Where applicable the examinations are written using the most recent released version of the product. The current Professional Certifications are:

Industrial Training Catalogue MY_201512SSSS

> For more information:

Unity Certified

Professional

Networking Certified

Professional

Telemetry Certified

Professional

Vijeo Citect Certified

Professional

Certified Engineer is the highest level of accreditation achievable and recognizes the architectural expertise of PlantStruxure Engineers who can support the increasingly complex automation networks of global organizations and effectively translate business strategies into Automation Architectures.

Professional Certifications along with further examinations build to become Engineer Certifications :

PSXCertified Engineer

Unity Certified

Professional

NetworkingCertified

Professional

Vijeo CitectCertified

Professional

PSX (+PES)Certified Engineer

Unity Certified

Professional

StruxureWare PE Config.

Exam

NetworkingCertified

Professional

Vijeo CitectCertified

Professional

[email protected]

Or Visit Virtual Campus :

Page 14: helping you easily select the right training Malaysia 2016 · PDF filehelping you easily select the right training ... into Vijeo Citect / CitectSCADA project design and ... with Vijeo

Drive Products Training Courses

ATS01-ATS22-ATS48 Starters ATSP p 14

ATV61-71 Products ATV71P p 15

Introduction ATV1200 MVD01 p 16

Altivar Process ATVPro p 17

End-User Training CoursesDrives Technology & System Courses

Intermediate

Intermediate

Intermediate

Basic

Industrial Training Catalogue MY_201513SSSS

Page 15: helping you easily select the right training Malaysia 2016 · PDF filehelping you easily select the right training ... into Vijeo Citect / CitectSCADA project design and ... with Vijeo

ATS01-ATS22-ATS48 Starters

> Course Objective● Review starters and motor basics.

● To know ATS offer in detail and to be able to choose, set up and commission ATS.

> Training Content● ATS01-ATS22-ATS48 offer overview.

● Soft starters principle.

● ATS set-up and tools .(SoMove)

● ATS sizing.

● Application functions set up with demo.

> Target Audience● This course is designed for engineering and maintenance skill trades

personnel who need to maintain and integrate control system programusing softstater.

ATSP

In Class

4-10 Trainees

2.5 days

Intermediate

Industrial Training Catalogue MY_201514SSSS

> Additional Notes:● Participant must bring their laptop

● The training manual will be provided as an electronic copy.

2.5 days

70% Theory

30% Hands-On

RM 1,200 per participant

> Application Devices and Software● Training Panels:

● ATS Demo Benches.

● Software Used:

● None.

> Prerequisites● Students attending this course should have a fundamental

understanding of motor starting basics and good knowledge of thedrive. (direct, star/delta, autotransformer)

Page 16: helping you easily select the right training Malaysia 2016 · PDF filehelping you easily select the right training ... into Vijeo Citect / CitectSCADA project design and ... with Vijeo

ATV61-71 Products

> Course Objective● To know ATV61-71 offer in details.

● To be able to set up and commission ATV61-71 on basic applications.

● To know ATV61-71 communication main features.

> Training Content● ATV61-71 offer overview.

● Drives set-up and tools. (SoMove)

● Motor control principle and selection.

● Application functions set up with demo.

● EMC, harmonics and safety features.

● Communication basics .(CANopen, Modbus, I/O mode)

ATV71P

In Class

4-10 Trainees

4.5 days

Intermediate

> Target Audience● This course is designed for engineering and maintenance skill trades

personnel who need to maintain and integrate control system programusing variable speed drive.

Industrial Training Catalogue MY_201515SSSS

● Communication basics .(CANopen, Modbus, I/O mode)4.5 days

50% Theory

50% Hands-On

RM 1,500 per participant

> Prerequisites● Students attending this course should have a fundamental

understanding of motor starting basics and good knowledge of thedrive. (direct, star/delta, autotransformer)

> Application Devices and Software● Training Panels:

● ATV Demo Benches.

● Software Used:

● SoMove.

> Additional Notes:● Participant must bring their laptop

● The training manual will be provided as an electronic copy.

Page 17: helping you easily select the right training Malaysia 2016 · PDF filehelping you easily select the right training ... into Vijeo Citect / CitectSCADA project design and ... with Vijeo

Introduction ATV1200

> Course Objective● Understand the operating principle, hardware component of the ATV1200 drive.

● Design cooling system of the drive system.

● Start-up, maintenance and troubleshoot the ATV1200 drive.

● Modify the parameters of the Altivar drive.

> Training Content● General Safety at MV-Drives.

● Differences at the drives within the voltage and power range.

● Internal structure, troubleshooting.

● Parameter setting in the ATV1200 software.

● Cooling system for electrical room.

● Component of the drive system.

MVD01

In Class

4-10 Trainees

1 days

Basic

> Target Audience● This course is designed for design engineer of EPC, consultant & end

user that involved in system designing of the electrical room and MVvariable drive system.

Industrial Training Catalogue MY_201516SSSS

● Troubleshooting of the Altivar 1200.

● System availabilities with cell bypass.

● Motor friendliness.

> Prerequisites● ATTENTION : participants should have attended Schneider Electric LV

drive training.

● VSD repairing and set up experience.

1 days

70% Theory

30% Hands-On

RM 2,500 per participant

> Application Devices and Software● Training Panels:

● None.

● Software Used:

● ATV1200 HMI Simulator.

> Additional Notes:● Participant must bring their laptop .

● The training manual will be provided as an electronic copy.

Page 18: helping you easily select the right training Malaysia 2016 · PDF filehelping you easily select the right training ... into Vijeo Citect / CitectSCADA project design and ... with Vijeo

Altivar Process

> Course Objective● To be self sufficient in Altivar Process range, ATV6xx.

● To know Altivar Process commissioning and diagnosis tool.

● To be able to set up and commission ATV6xx on basic application.

● To know the main UVP of product ranges.

> Training Content● Applicative Path. (including Segment Applications descriptions and

introduction to their components)

● Device integration in existing architectures. (ie : PlantStruxure)

ATVPro

In Class

4-10 Trainees

4.5 days

Intermediate

> Target Audience● This course is designed for engineering and maintenance skill trades

personnel who need to maintain and integrate control system programusing variable speed drive.

Industrial Training Catalogue MY_201517SSSS

> Application Devices and Software● Training panels

● Demo cases and demo benches.

● Webserver.

● Software used● SoMove.

● Demo on Unity .

4.5 days

40% Theory

60% Hands-On

RM 1,500 per participant

> Prerequisites● Students attending this course should have a fundamental

understanding of motor starting basics and good knowledge of thedrive. (direct, star/delta, autotransformer)

> Additional Notes:● Participant must bring their laptop .

● The training manual will be provided as an electronic copy.

Page 19: helping you easily select the right training Malaysia 2016 · PDF filehelping you easily select the right training ... into Vijeo Citect / CitectSCADA project design and ... with Vijeo

Machine Solutions Optimised Offer

Sensor Technology SCT-01 p 19

SoMachine Basic & M221 MST-10 p 20

Machine Solutions Performance Offer

Introduction to SoMachine Configuration INDTECI000021 p 21

Vijeo Designer Configuration INDTECI000014 p 22

Machine Solutions Motion Control

End-User Training CoursesMachine Solution Courses

Basic

Basic

Basic

Intermediate

Industrial Training Catalogue MY_201518SSSS

Machine Solutions Motion Control

Sizing & Selection INDTECI000041 p 23

Lexium 32/Lexium 32i INDTECI000046 p 24

Lexium 28 INDTECI000049 p 25

Basic

Intermediate

Intermediate

Page 20: helping you easily select the right training Malaysia 2016 · PDF filehelping you easily select the right training ... into Vijeo Citect / CitectSCADA project design and ... with Vijeo

Sensor Technology

> Course Objective

● This course is designed to introduce the student range of offer sensor, different types ofsensors and their application.

> Target Audience● Everyone who wants to discover the industrial sensor control.

> Training Content● Detection at a Glance.

● Types of Sensors.

- Limit Switches.

- Pressure Sensors.

- Inductive Sensors.

- Capacitive Sensors.

- Photoelectric Sensors.

- Ultrasonic Sensors, RFID.

SCT-01

In Class

4-10 Trainees

2 days

Basic

Industrial Training Catalogue MY_201519SSSS

- Ultrasonic Sensors, RFID.

- Rotary Encoders and Machine Cabling Accessories.

● Application of Sensor Products.

> Prerequisites● Students attending this course should have a fundamental

understanding of industrial controls and basic logic controls.

> Application Devices and Software● Sensor Demo Panels:

.

2 days

60% Theory

40% Hands-On

RM 800 per participant

> Additional Notes● None

Page 21: helping you easily select the right training Malaysia 2016 · PDF filehelping you easily select the right training ... into Vijeo Citect / CitectSCADA project design and ... with Vijeo

SoMachine Basic & M221

> Training Content● Introduction to SoMachine Basic.

● Hands on Workshop SoMachine Basic.

● Create a New Project.

● Add a Device to an Empty Project.

● Program an IL/LD POU.

MST-10

In Class

4-10 Trainees

2 days

Basic

> Course Objective

● Provides an overview of SoMachine Basic and the M221 Logic Controller. It is broken down intomodules covering the hardware, programming, and basic troubleshooting. It gives a very goodintroduction to this new product from the Machine Solutions group.

> Target Audience● This course is designed for engineering and maintenance skill trades

personnel who need to maintain and integrate control system programusing motion product.

Industrial Training Catalogue MY_201520SSSS

● Task configuration.

● Download / Upload a Project .

● Animation Table.(Forcing/ Monitoring Objects)

● Simulation Mode.

> Prerequisites● No.

2 days

60% Theory

40% Hands-On

RM 1,500 per participant

> Additional Notes● None.

> Application Devices and Software● Training panels

● None.

● Software used● SoMachine Basic.

Page 22: helping you easily select the right training Malaysia 2016 · PDF filehelping you easily select the right training ... into Vijeo Citect / CitectSCADA project design and ... with Vijeo

Introduction to SoMachineConfiguration> Course Objective

● This course instructs the student on the configuration, programming and operation of the M241.The SoMachine software package is used for program development. This is a hands-ontechnical training with many supporting exercises. Basic programming of the HMISCU andLexium 32.

> Training Content● Product hardware overview: New project creation, Task basics, POU

program creation, CoDeSys Introduction.

● Gateway configuration.

● Variable declaration and Data types, IEC 61131-3-3 languages.

● CoDesys operators, CoDesys Libraries.

● Embedded IO and IO mapping.

● Event driven tasks, Online editing & Boot application.

INDTECI000021

In Class

4-10 Trainees

3 days

Basic

> Target Audience● This course is designed for engineering and maintenance skill trades

personnel who need to maintain and integrate control system programusing motion product.

Industrial Training Catalogue MY_201521SSSS

● Event driven tasks, Online editing & Boot application.

● Debugging tools, Trace editor and breakpoints.

● Visualisations.

● Manual Mode.

● Automatic Mode.

> Prerequisites● Students should have knowledge of PLC programming. This course

assumes prior Video Designer experience and does not focus on VijeoDesigner screen development.

● SoMachine eLearning VSoM_v1 is strongly recommended.

> Application Devices and Software● Training panels:

● M241 simulators with Lexium 32 and SCU are require.

● Software used:

● SoMachine.

● Vijeo Designer.

> Additional Notes● Trainees must bring their laptops with 2048

Mb RAM and 14Gb free on the hard disk.

3 days

35% Theory

65% Hands-On

RM 1,500 per participant

Page 23: helping you easily select the right training Malaysia 2016 · PDF filehelping you easily select the right training ... into Vijeo Citect / CitectSCADA project design and ... with Vijeo

Vijeo Designer Configuration

> Course Objective● This course instructs the student on the installation, configuration and operation of the Vijeo

Designer software package and Magellis XBTGT HMI hardware. The successful student will beable to create custom applications as well as demonstrate the software’s operation to othersupon completion of this course. All aspects of the Vijeo Designer Configuration software arecovered with a focus on project creation.

> Training Content● Hardware platform overview –Vijeo Designer features.

● Magellis physical overview – ports, connection locations .

● Dip switch configuration.

● Configuration of Modbus TCP/IP, Modbus.

● Project transfer options, Target initialisation, Project creation.

● Panel development, panel navigation, Variable creation.

INDTECI000014

In Class

4-10 Trainees

3 days

Intermediate

> Target Audience● Engineering and maintenance skill trades personnel who are involved

with developing or maintain control system and their applicationprograms using Magelis graphics series HMI and Vijeo Designer.

Industrial Training Catalogue MY_201522SSSS

● Panel development, panel navigation, Variable creation.

● Importing variables from a Unity Pro project.

● Animations and clipart, Popup panels, Meters and motion, Trending options.

● Alarm operation, configuration and management, Scripting.

● Security options and operation, Recipes configuration and operation.

● Data sharing configuration and operation.

● Web Gate configuration and operation.

● Multimedia options, Multimedia configuration and operation.

> Prerequisites● Students should have knowledge of PLC programming.

> Application Devices and Software● Training Panels:

● None (simulation only) or

● XBTGT + PLC.

● Software Used:

● Vijeo Designer.

> Additional Notes● Trainees must bring their laptops.

3 days

40% Theory

60% Hands-On

RM 1,500 per participant

Page 24: helping you easily select the right training Malaysia 2016 · PDF filehelping you easily select the right training ... into Vijeo Citect / CitectSCADA project design and ... with Vijeo

Sizing & Selection

> Course Objective● To be able to calculate and select individual motion components for a machine.

● To know the method of sizing and selection.

> Training Content● Basic of Sizing.

● Calculation of a PAS Axis without the tool.

● Sizing with the SERVOsoft.

● Motion Lexium Sizer Expert user.

INDTECI000041

In Class

4-10 Trainees

1 days

Basic

> Target Audience● This course is designed for engineering and maintenance skill trades

personnel who need to maintain and integrate control system programusing motion product.

Industrial Training Catalogue MY_201523SSSS

● Motion Lexium Sizer Expert user.

> Prerequisites● Basic knowledge in electrical engineering, mathematics and physics.

> Application Devices and Software● Training panels:

● None.

● Software used:

● SERVOsoft.

> Additional Notes● Exercises on calculation examples.

1 days

50% Theory

50% Hands-On

RM 800 per participant

Page 25: helping you easily select the right training Malaysia 2016 · PDF filehelping you easily select the right training ... into Vijeo Citect / CitectSCADA project design and ... with Vijeo

Lexium 32/Lexium 32i

> Course Objective● This training is an introduction to the product Lexium 32 and 32 i.

● After the course, you will be able to parameterize and optimize the servo motor.

● You will also get to know the engine-power class and the fields of application.

INDTECI000046

In Class

4-10 Trainees

2 days

Intermediate

> Target Audience● This course is designed for engineering and maintenance skill trades

personnel who need to maintain and integrate control system programusing motion product.

> Training Content● Product overview.

● Motor technology.

● Accessories.

● General device technology.

● Electrical installation, safety engineering.

● HMI (Human Machine Interface), State machine.

Industrial Training Catalogue MY_201524SSSS

> Prerequisites● Basic knowledge of electrical engineering

● Basic about CAN fieldbus

> Application Devices and Software● Training panels:

● Lexium 32/Lexium 32i.

● Software used:

● Lexium CT.

> Additional Notes● Participation in the Control Loop training is

strongly recommended.

2 days

50% Theory

50% Hands-On

RM 1,500 per participant

● HMI (Human Machine Interface), State machine.

● Tuning (Control loop), diagnostics and troubleshooting.

● Operating modes.

● Connection of third party motor.

● Additional safety functions.

Page 26: helping you easily select the right training Malaysia 2016 · PDF filehelping you easily select the right training ... into Vijeo Citect / CitectSCADA project design and ... with Vijeo

Lexium 28

> Course Objective● This training is an introduction to the product Lexium 28.

● After the course, you will be able to parameterize and optimize the servo motor.

● You will also get to know the engine-power class and the fields of application.

INDTECI000049

In Class

4-10 Trainees

2 days

Intermediate

> Target Audience● This course is designed for engineering and maintenance skill trades

personnel who need to maintain and integrate control system programusing motion product.

> Training Content● Product overview.

● Motor technology.

● Accessories.

● General device technology.

● Electrical installation, safety engineering.

● HMI (Human Machine Interface), State machine.

Industrial Training Catalogue MY_201525SSSS

> Prerequisites● Basic knowledge of electrical engineering

● Basic about CAN fieldbus

> Application Devices and Software● Training panels:

● Lexium 28.

● Software used:

● Lexium CT.

> Additional Notes● Participation in the Control Loop training is

strongly recommended.

2 days

50% Theory

50% Hands-On

RM 1,500 per participant

● HMI (Human Machine Interface), State machine.

● Tuning (Control loop), diagnostics and troubleshooting.

● Operating modes.

● Connection of third party motor.

● Additional safety functions.

Page 27: helping you easily select the right training Malaysia 2016 · PDF filehelping you easily select the right training ... into Vijeo Citect / CitectSCADA project design and ... with Vijeo

Training Calendar

January

Unity Pro Configuration

Quantum Ethernet I/O

M580 Configuration

Quantum & Premium Hot Standby

Vijeo Citect / CitectScadaConfiguration

Principle of Ethernet Networking

ATS01-ATS22-ATS48 Staters

February March April

M580 Hot Standby

21.03.-22.03.2016

24.03.-25.03.2016

14.04.-15.04.2016

ONLY ON DEMAND

ONLY ON DEMAND

24.02.-.25.02.2016

Industrial Training Catalogue MY_201526SSSS

ATV61-71 Products

Sensor Technology

Introduction ATV1200

Altivar Process

SoMachine Basic & M221

Introduction to SoMachineConfiguration

Vijeo Designer Configuration

Sizing & Selection

Lexium 32 / Lexium 32i

Lexium 28

24.02.-.25.02.2016

29.02.-.04.03.2016

17.03.-18.03.2016

30.03.2016

31.03.-01.04.2016

13.04.-14.04.2016

21.03.-25.03.2016

Page 28: helping you easily select the right training Malaysia 2016 · PDF filehelping you easily select the right training ... into Vijeo Citect / CitectSCADA project design and ... with Vijeo

Training Calendar

May

Unity Pro Configuration

Quantum Ethernet I/O

M580 Configuration

Quantum & Premium Hot Standby

Vijeo Citect / CitectScadaConfiguration

Principle of Ethernet Networking

ATS01-ATS22-ATS48 Staters

June July August

M580 Hot Standby

ONLY ON DEMAND

ONLY ON DEMAND

27.06.-28.06.2016

15.06.-17.06.2016

20.07.-21.07.2016

Industrial Training Catalogue MY_201527SSSS

ATV61-71 Products

Sensor Technology

Introduction ATV1200

Altivar Process

SoMachine Basic & M221

Introduction to SoMachineConfiguration

Vijeo Designer Configuration

Sizing & Selection

Lexium 32 / Lexium 32i

Lexium 28

27.05.2016

14.06.-15.06.2016

16.05.-18.05.2016

19.05.-20.05.2016

08.08.-12.08.2016

01.08.-02.08.2016

03.08.2016

04.08.-05.08.2016

09.08.-10.08.2016

Page 29: helping you easily select the right training Malaysia 2016 · PDF filehelping you easily select the right training ... into Vijeo Citect / CitectSCADA project design and ... with Vijeo

Training Calendar

September

Unity Pro Configuration

Quantum Ethernet I/O

M580 Configuration

Quantum & Premium Hot Standby

Vijeo Citect / CitectScadaConfiguration

Principle of Ethernet Networking

ATS01-ATS22-ATS48 Staters

October November December

M580 Hot Standby

ONLY ON DEMAND

ONLY ON DEMAND

11.10.-12.10.2016

20.10.-21.10.2016

22.11.-23.11.2016

24.11.-25.11.2016

07.12.-09.12.2016

Industrial Training Catalogue MY_201528SSSS

ATV61-71 Products

Sensor Technology

Introduction ATV1200

Altivar Process

SoMachine Basic & M221

Introduction to SoMachineConfiguration

Vijeo Designer Configuration

Sizing & Selection

Lexium 32 / Lexium 32i

Lexium 28

26.09.-30.09.2016

26.10.2016

18.10-19.10.2016

10.10-12.10.2016

13.10-14.10.2016

Page 30: helping you easily select the right training Malaysia 2016 · PDF filehelping you easily select the right training ... into Vijeo Citect / CitectSCADA project design and ... with Vijeo

Training Centre

Regular scheduled training courses are available at the our training centre.

Industrial Training Catalogue MY_201529SSSS

Customer Care Center 1-800-880-877We’ll be pleased to provide you with additional information relating to your sector andrequirements. Alternatively, visit out web site at www.schneider-electric.com.my for moredetailed overview of our capabilities, product and services.

Page 31: helping you easily select the right training Malaysia 2016 · PDF filehelping you easily select the right training ... into Vijeo Citect / CitectSCADA project design and ... with Vijeo

Registration InformationTERMS AND CONDITIONS

Registration: Registration should be made by faxusing attached Registration Form no less than 14days in advance of the start date of the course.Email or verbal registrations are not entertained.The Company reserves the right to not proceedwith your registration.

Confirmation: Confirmation of registration will bemade in writing subject to the receipt of:• Signed Registration Form accepting SchneiderElectric Terms and Conditions, and• Purchase Order 7 days prior to the first dateof the course

If the above 2 conditions are not complied with,the Company reserves the right not to confirmyour registration and release your place in theclass.

Fees: An advance deposit of RM100 is requiredfor every registered name, per course. Balance ofpayment is payable in advance. Standard CourseFees indicated here cover the cost of tuition,instructional manuals, course materials, the use ofequipment and the cost of lunches/refreshments.

• More than 14 days: Full (100%) Refund• 7 to14 days: 80% Refund• 2 to 7 days: Non -Refundable, however,suitably qualified replacements are welcome,provided they register 14 days prior to theagreed course commencement date betweenyou and the Company.• Less than 2 days: Same term as 2 to 7 days,however, the advance deposit is requiredagain for the next agreed qualifiedreplacement.

PRIVACY POLICYCollection of Personal Information: The Companywill collect and maintain personal informationonly where it is directly related to the commercialoperations of its business. This information islimited to names, business addresses andcontact details.

Use or Disclosure of Personal Information:Information collected will only be used for thepurpose for which it was collected, except whereyou consent to it being used for another purpose.

Industrial Training Catalogue MY_201530SSSS

equipment and the cost of lunches/refreshments.Prices shown are in Malaysia Ringgit currencyand are subject to changes without notice.

Course Documentation : Published coursedescriptions are the standard courses offered bythe Company and are for general reference only.Course documentation and printed material areprovided in Schneider Electric. Training coursesare copyrighted and may not be reproducedwithout prior written consent. No audio or visualrecording of Schneider Electric training courses orof Schneider Electric personnel teaching suchcourses, may be taken or reproducedelectronically without prior written consent.

General: Schneider Electric reserves the right tochange course schedules, discontinue courses,modify course content and/or trainer, limit classsize, and reschedule or cancel courses due to anyunforeseen circumstances. An attempt will bemade to inform the customer in advance.

Cancellation: Requests for cancellations or re-schedule must be received in writing andacknowledged by Schneider Electric. Below arethe terms for written cancellation received prior tocourse commencement :

you consent to it being used for another purpose.We will take reasonable steps to protect thepersonal information we hold from misuse andloss, from unauthorized access, modification ordisclosure.

Access to Your Personal Information: You canaccess the personal information we hold aboutyou and ask for it to be corrected if it isinaccurate. Unless an exception applies, we willallow you access to the information upon request.The Company reserves the right to charge areasonable fee for providing access to thisinformation.

ONSITE OR CUSTOMIZED COURSESBoth Onsite and/or Customized courses could bearranged on request, either at customer premisesor at Schneider Electric Training Centre. Onsitecourse fees will include instructor’s expenses.Customization of trainings will attract anadditional 5% customization fee and thiscustomization fee is subject to changes withoutnotice. Kindly contact us at +603-7883 6333 for aFREE proposal.

Page 32: helping you easily select the right training Malaysia 2016 · PDF filehelping you easily select the right training ... into Vijeo Citect / CitectSCADA project design and ... with Vijeo

Training Registration Form

A) Delegate Details

Contact Person

Company Name

Company Address

:

:

:

Email

Phone

Mobile Number

:

:

:

B) Course Details

Course Code : Course Date :

* One form per course, please use separate forms for different courses.

C) Participant Details

Name Job Title Name Job Title

D) Payment Details

Industrial Training Catalogue MY_201531SSSS

PLEASE NOTE: The Advance Deposit is required prior to the commencement of the course.

Advance Deposit : RM100 X participants = RM

Balance : RM

I wish to pay by : CHEQUE, made payable to Schneider Electric (M) Sdn. Bhd.

Company Purchase Order

E) Signature

With this, I hereby agree to the Terms andConditions as stated in this CustomerTraining Catalogue. I also confirm that allparticipants registered above have met thepre-requisites required for the class.. Authorized Signature & Company Stamp Date (dd/mm/yyyy)

F) Feedback (for office use only)

Thanks for your registration. We will complete this portion and return/ feedback to you for the course confirmation. If you don’t receive this feedback form one week before the commencement of the course, kindly call us at +603 7883 6333.

Met

NOT Met

Pre - requisites

Require

NOT Require

Payment

PO / Cheque is required. Your place in class will b ereleased if payment is not received within seven (7 )business day from the start date of the class.

Confirmed NOT Confirmed Class Full

Limited Seats No Additional Class Held This Year

Status / Class Availability

Contact

Contact Person :

Date :

Phone :

Page 33: helping you easily select the right training Malaysia 2016 · PDF filehelping you easily select the right training ... into Vijeo Citect / CitectSCADA project design and ... with Vijeo

Make the most of your energyMake the most of your energyMake the most of your energyMake the most of your energy

Industrial Training Catalogue MY_201532SSSS

Schneider Electric (M) Sdn BhdSchneider Electric Industries (M) Sdn Bhd (378576-M)

HeadquatersUnit TB-18-2, Level 18, Tower B,Plaza 33, No.1 Jalan Kemanjuan,Seksyen 13, 46200 Petaling Jaya,Selangor, MalaysiaTel : (603) 7883 6333Fax : (603) 7883 6188Email : [email protected] Care Center : 1-800-880-877Website : www.schneider-electric.com.my

Nationwide BranchesJohor BahruTel : (607) 351 3801 / 802Fax : (607) 351 4113

PenangTel : (604) 643 8187 / 175Fax : (604) 643 9197

Kota KinabaluTel : (6088) 237 000 / 012Fax : (6088) 216 900

KuchingTel : (6082) 450 242Fax : (6082) 450 373