Heavy-range Broch Lowq

8/12/2019 Heavy-range Broch Lowq

http://slidepdf.com/reader/full/heavy-range-broch-lowq 1/20

A world leader in mining and construction

Mobile Crushing and Screening Units

Heavy-range



CONTENTS

PAGE 2

ContentsUJ640 Jaw Crusher Unit 3.

UJ540 Jaw Crusher Unit 5.

UJ440E Jaw Crusher Unit 7.

UJ440i Jaw Crusher Unit 9.

UH640 Cone Crusher Unit 11.

US440i Cone Crusher Unit 13.

UH440i Cone Crusher Unit 15.

QA450 Triple Deck Screen 17.

QA440 Doublescreen 19.

QE440 Scalping Screen 21.

Crushing Unit Specifications 23.

Screening Unit Specifications 25.

Crushing Unit Options 27.

Screening Unit Options 29.

Aftersales Support 31.

Mobile Crushing and Screening Range 33.

J A W

PAGE 1

Heavy-range mobiles

in ActionThe Sandvik heavy-range of tracked crushing, screening and scalpingsolutions provides customer focused solutions whatever the industry andwhatever the application. The range encompasses jaw, cone and impactcrushers; three way split screeners, the world’s only range of trackedDoublescreens, scalpers and triple deck screens.

The Sandvik range of heavy duty crushers combines high mobility with

high productivity, without the loss of flexibility of operation. Primarilydeveloped for mineral processing in the quarrying, aggregate and surfacemining industries, they have now proved their worth in the constructionindustry processing secondary and recycled aggregate.

Although fully capable of operating independently, all heavy dutycrushers have been designed to work together in order to producemultiple products from a single crusher run. With a high level ofautomation and excellent interlocking characteristics, one or more unitsmay be controlled by a single operator.

Now married to state of the art high production tracked screeningsystems, the Sandvik heavy range encompasses a one stop solution forthe truly serious crushing and screening operator.

INTRODUCTION



Jaw size of 1500mm x 1100mm (60 x 44 inches) allows for•exceptional rates of throughput.

Offers high material reduction values with low jaw plate wear, and•yet is still able to accept large material feed size.

Efficient, rapid and easy set-up and take down for transportation,•with no requirement for heavy lift ing equipment.

High return on investment is assured through low cost per ton•operation, and long machine life time (10-15years).

Full operator training and machine commissioning are integral parts•of the machine delivery.

Global aftermarket support with standard stock parts to ensure•minimum machine downtime.

The efficiency of the unit is maximized due to Sandvik’s simplified•and standardised wear parts being designed to provide the highestlevels of performance.

Very low emissions as is able to operate from electrical mains or•from onboard diesel generator.

PAGE 3

The UJ640 tracked jaw crusher combines high levels of automation,mobility, flexibility of operation, rapid return on i nvestment, with highquality material production. Purpose designed for the global aggregatesindustry, this giant of the crushing world delivers astounding rates ofproduction throughout the quarry, open cast site or “Super Quarry”.The UJ640 provides the customer with low energy consumption, ease oftransport, and low levels of dust, sound and exhaust emissions.

The UJ640 has proved suitable for:

Aggregate production•

Surface mining• Quarried rock•

UJ640 JAW CRUSHER UNIT

UJ640 Jaw Crusher Unit

in Action

Features and values



UJ540 JAW CRUSHER UNIT

UJ540 Jaw Crusher Unit

in Action

Jaw size of 1200mm x 1100mm (48 x 44 inches) for impressive•rates of production.

Easy to operate and feed due to the massive feed opening, but still•offers a very high reduction ratio even with the toughest of rock.

Highly flexible, and productive operation, with hydraulic Closed•Side Setting (CSS).


Efficient, rapid and easy set-up and take down for transportation•with no requirement for heavy lift ing equipment.





PAGE 5

The UJ540 with its simplified operating systems mounts the highlyproductive Sandvik CJ612 jaw crusher on a full tracked chassis, butwith an electric crusher drive. Flexibility of operation is ensured throughhydraulic jaw setting that enables differing products to be producedwithout affecting production. The UJ540 provides the customer withlow energy consumption, ease of transport, and low levels of dust, soundand exhaust emissions. To ensure maximum return on investment thiscrusher is designed for high capacity, low environmental impact andautomated process control.

The UJ540 has proved suitable for:

Aggregate production•Surface mining•Quarried rock•

Features and values



PAGE 7

UJ440E JAW CRUSHER UNIT

UJ440E Jaw Crusher Unit

in Action

Jaw size of 1200mm x 800mm (48 x 32 inches) for highest rates of•production in its class.

Trouble free and safe operation are ensured due to automatic and•continuous monitoring of the production process by the controlsystem.

High return on investment through low cost per ton operation, and•long machine life time (10-15years).

The machine is designed to operate with impressive up-time that•includes scheduled and unscheduled service work.





Possesses the highest operational safety levels currently available,•with low energy consumption and low levels of dust, sound andexhaust emissions.

The UJ440E is a high capacity, high production, easily transportable,robust crushing system that has been designed and built to last. Lowemissions and economy of operation are integral to the unit, as it isable to operate from electrical mains or from onboard diesel generator.The UJ440E provides profitable, long lasting, environmentally focusedcrushing, that maximises return on investment and produces low costper ton operation.

The UJ440E has proved suitable for:

Aggregate production•

Surface mining• Quarried rock•Recycling of construction materials•Processing demolition waste•

Features and values



C O N E

PAGE 9

UJ440i JAW CRUSHER UNIT

UJ440i Jaw Crusher Unit

in Action

Jaw size of 1200mm x 800mm (48 x 32 inches) for highest rates of•production in its class.

Production is maximised as the crusher possesses a generous feed•opening coupled with a hydraulic close side setting (CSS) thatenables rapid changes through push button operation.

Machine is capable of producing two product fractions with•(optional) “hanging” screen unit.

Trouble free and safe operation is ensured due to automatic and•continuous monitoring of the production process by the in-builtintelligent control system.

Optimized production with “wire less” interlocking between the•units when working in train.

Quick set-up and close-down, together with on, and site to site•transportability (highest capacity in one piece transport on market),being integral design features.

Uptime maximized due to low maintenance requirement and ease of•fault location.

Highly fuel efficient due to low rpm diesel engine and true direct•drive of crusher.

Power and economy are combined thanks to a modern, on board•diesel power pack with low fuel consumption and minimumtransmission losses.


Spill free oil change due to collection system for waste oils.•

The UJ440i provides customers with a heavy and robust unit, thathas proved capable of working throughout the world in all climaticconditions. Possesses an intelligent and trouble free operation thanksto the on board integrated “intelligence” system. This allows forsimplicity of operation as the UJ440i is continuously and automaticallymonitored by the control system that operates the unit, and enables fulloptimisation of production allowing materials to be crushed year afteryear. Married to a fully tracked chassis the UJ440i brings profitable jawcrushing to a new dimension.

The UJ440i has proved suitable for:

• Aggregate production• Surface mining• Quarried rock• Recycling of construction materials• Processing demolition waste

Features and values



The Sandvik CH660 cone allows a feed size of up to 235mm (9• 1 / 4inches).

The cone crusher itself is designed for superb product shape, at high•throughout, with the entire crushing system ensuring maximumthroughput at all times.


Capable of producing two fractions to “the ground” and one to the•return conveyor.

Efficient, rapid and easy set-up and take down for transportation•with no requirement for heavy lift ing equipment.


Cost effectiveness is ensured as the unit is able to operate from•electrical mains or from onboard diesel generator.


The efficiency of the unit is maximised due to Sandvik’s simplified•and standardised wear parts being designed to provide the highestlevels of performance.

PAGE 11

The UH640 is a highly flexible, high capacity, secondary cone crusherunit that is able to produce sized finished products thanks to an integralproduct screen and closed circuit operation. The UH640 is able to dealwith many different applications due to alternative cone crusher settingsas it mounts the advanced Sandvik CH660 cone crusher on a purposebuilt tracked chassis. Furthermore, the UH640 delivers astounding ratesof production throughout the quarry, open cast site or “Super Quarry”in an environmentally focused manner.

The UH640 has proved suitable for:

Aggregate production• Surface mining•Quarried rock•

UH640 CONE CRUSHER UNIT

UH640 Cone Crusher Unit

in Action

Features and values



PAGE 13

US440i CONE CRUSHER UNIT

US440i Cone Crusher Unit

in ActionThe “built to last” US440i is a secondary cone crusher unit that hasbeen designed to deal with the toughest and hardest types of rock, inall possible climatic conditions. Comes complete with a class leadingmaterial intake, high reduction ratio and high capacity, yet minimisesenvironmental impact as the unit possesses a highly fuel efficient lowrpm diesel engine. The US440i represents the perfect solution forany contractor or quarry operator looking for a highly flexible, fullymobile secondary crushing unit that is able to deal with many processalternatives. With a rapid return on investment due to inherent highproductivity, low operational costs and high residual value, the US440ihas the reputation of being one of the toughest and productive crushers

on the market today.

The US440i has proved suitable for:

• Aggregate production• Surface mining• Quarried rock• Recycling of construction materials

Features and values

The Sandvik cone allows a feed size of up to 400mm (16 inches)•with the crusher mantel designed to enable superb product shape.

Produces material for further processing, or finished source product,•thanks to a recirculating screen that has been purpose designed forthe requirements of the minerals extractive industries.

Optimized production thanks to “wire less” interlocking between•the units when working in train.

Up-time maximized due to low maintenance requirement with•simplified fault finding and repair.

Easy to operate, with rapid setup and close down, and easily•transported in one piece (industry leading capacity) that enablesrapid operation on site, or from site to site.

Power and economy are combined thanks to a modern, on board•diesel engine with low fuel consumption and minimum transmissionlosses.

Full operator training and machine commissioning are integral parts•of the machine delivery, together with Global aftermarket supportwith standard stock parts to ensure minimum machine downtime.


Advanced engine configurations results in no diesel or oil spillage.•



S C R E E N

PAGE 15

UH440i CONE CRUSHER UNIT

UH440i Cone Crusher Unit

in ActionThe UH440i is a highly robust t racked cone crusher that has beendesigned to last as it is able to cope with the toughest and hardest typesof rock, yet able to operate in all climatic conditions. The UH440i hasthe reputation of being the toughest crusher on the market today, andrepresents the ultimate solution for any contractor or quarry operatorlooking for a highly flexible, fully mobile secondary crushing unit. Witha rapid return on investment due to inherent high productivity, lowoperational costs and high residual value, the UH440i comes completewith an automatic setting system, ASRi (II), which optimises conecrusher efficiency by automatically adapting the crusher to variations infeed conditions.

The UH440i has proved suitable for:

• Aggregate production• Surface mining• Quarried rock• Recycling of construction materials

Features and values

The Sandvik cone allows a feed size of up to 215mm (8• 1 / 2 inches)with the crusher mantel designed to enable superb product shape.

Able to operate in a secondary or tertiary role, that ensures its•suitability for all possible requirements due to numerous possiblecrusher settings.

Optional attached “hang on” screen, with closed circuit operation,•in order to facilitate production of a true finished product.

Simple, trouble free and safe operation is ensured due to automatic•continuous monitoring of the production process by the in-builtintelligent control system.

Optimized production thanks to “wire less” interlocking between•the units when working in train.

Up-time maximized due to low maintenance requirement with•simplified fault finding and repair.

Easy to operate, with rapid setup and close down, and easily•

transported in one piece (industry leading capacity) that enablesrapid operation on site, or from site to site.

Power and economy are combined thanks to a modern, on board•diesel engine with low fuel consumption (low rpm and true directcrusher drive) and minimum transmission losses.

Full operator training and machine commissioning are integral parts•of the machine delivery together with Global aftermarket supportwith standard stock parts to ensure minimum machine downtime.




QA450 (S-7) TRIPLE DECK SCREEN

PAGE 17

QA450 (S-7) Triple Deck Screen

in Action

Triple deck 6 x 1.5m (20’ x 5’) equivalent Doublescreen with four•product conveyors allows four accurately sized products to beproduced

Capable of working alongside large jaw crushers, yet precise enough•to produce accurate aggregate products

Modern chassis design ensures in built machine quality and strength•for maximum up-time

Global aftermarket support, with standard stock parts to ensure•minimum loss of production

Machine designed for optimum fuel economy and l ow operating•costs.

Features and values

Building upon the highly advanced features of t he existingDoublescreens, the QA450 introduces a triple deck screen box withan extra side conveyor that enables it to produce up to a total of fourproduct materials, plus one oversize from the tipping grid. Designed formaximum productivity, the QA450 incorporates a large feed hopper, a

pair of large screen boxes and extended conveyors that afford massivestockpiling capabilities. The screenbox in the QA450 makes use of thetried and tested Doublescreen design, but now with a unique triple deckdesign cementing Sandvik’s position as a true world leader.

The QA450 has proved suitable for:

Demolition and recycling•Quarrying and surface mining•Road construction•Civil engineering contractors•Aggregate production•Open cast coal mining•

Essentially any application that requires four products or less, accuratelysized, delivered at high production rates.



S C A L P E R

QA440 (S-6) DOUBLESCREEN

PAGE 19

QA440 (S-6) Doublescreen

in Action

Unique, independent 6 x 1.5m (20’ x 5’) equivalent Doublescreen•box design allows for precision screening, but huge screening areaenables high volume production

Capable of working alongside large jaw crushers, yet precise enough•to produce accurate aggregate products

Modern chassis design ensures in built machine quality and strength•for maximum up-time

Global aftermarket support, with standard stock parts to ensure•minimum loss of production

Machine designed for optimum fuel economy and l ow operating•costs.

Features and values

The Sandvik QA440 delivers true static screen productivity in a durable,mobile package. Designed with maximum productivity to the f ore, theQA440 incorporates a large feed hopper, a pair of large independentlyangled screen boxes, and extended conveyors that afford massivestockpiling capabilities. This highly productive machine is carried on a

large, durable chassis that is designed to withstand the rigours of a largequarry or recycling application. A self loading hydraulic bogie providesan independent transport capability without the need for low loaders.

The QA440 has proved suitable for:

Demolition and recycling•Quarrying and surface mining•Road construction•Civil engineering contractors•Aggregate production•Open cast coal mining•

Essentially any application that requires three or four products,accurately sized, delivered at high production rates.



S P E C S

QE440 SCALPING SCREEN

PAGE 21

QE440 Scalping Screen

in Action

Class leading total scalping area of 5.5 x 1.75m / 5 x 1.75m (18 x•6’ / 16.5 x 6’) allows for enormous rates of production

Capable of being fed by large crushers, yet precise enough to•produce accurate aggregates, and tough enough to recycle mixedmaterials

Wide variety of deck options including mesh, tines, punch plate and•grizzly

Heavy duty crusher-type chassis ensures maximum up-time•

Global aftermarket support, with standard stock parts to ensure•

minimum loss of production

Machine designed for efficient fuel economy, and low operating•costs.

Features and values

The QE440 has been developed to cater for the serious aggregateproducer and to this end boasts 40% more screening area than itspredecessor - the market leading QE340. Importantly, the stockpilingconveyors are both wider and higher to deal with both the increasedproduction capacity and facilitate larger stockpiles. Punched plate, heavy

duty mesh, rock fingers or grizzly bars can be fitted to the top deck whileheavy duty mesh or fingers can be fitted to the bottom to match specificapplication and material requirements. The QE440 comes complete witha more powerful, yet economical engine to power this truly productivemachine, as well as mould breaking features found on the QE340.

Applications include:

The screening of heavy overburden at a quarry face•Pre-screening and scalping•Recycling of construction and landfill waste•Separation of cohesive aggregates.•



PAGE 24

Key specications UJ440E UH640 UH440i

Equipment CJ412 Jaw CH660 Cone CH440 Cone

Max feed size 760 mm (30 in) 235 mm (9 in) 215 mm (8 in)

Capacity up to 600mtph (661 stph) 500mtph (551 stph) 350 mtph (385 stph)

Total weight 71.3 t (78.6 st) 84.0 t (92.6 st) 47.3 t (52.1 st)

Part 1 67.5 t (73.5 st) 64.0 t (70.5 st) -

Part 2 3.8 t (4.4 st) 8.0 t (8.8 st) -

Part 3 - 12.0 t (13.2 st) -

Operation dimensions

Length 20.6 m (67.6 ft) 31.4 m (103.0 ft) 17.5 m (57.4 ft)

Width 3.3 m (130 in) 4.5 m (177 in) 3.0 m (118 in)

Height 4.7m (185 in) 6.2 m (244 in) 4.9 m (193 in)

Transport dimensions * Transport in 2 ps

Part 1 length 20.2m (66.3 ft) 14.8 m (48.6 ft) 18.8 m (61.7 ft)

Part 1 width 3.3m (130 in) 3.5 m (138 in) 3.0 m (118 in)

Part 1 height 3.9m (154 in) 3.9 m (154 in) 3.9 m (154 in)

Part 2 length - 4.5 m (14.8 ft) -

Part 2 width - 3.1 m (122 in) -

Part 2 height - 3.0 m (118 in) -

Part 3 length - 7.9 m (25.9 ft) -

Part 3 width - 3.1 m (122 in) -

Part 3 height - 2.8 m (110 in) -

CRUSHING UNIT SPECIFICATIONS

Key specications US440i

Equipment CS440 Cone

Max feed size 400 mm (16 in)

Capacity up to 500 mtph (551 stph)

Weight 53.0 t (58.4 st)Operation dimensions

Length 17.5 m (57.4 ft)

Width 3.0 m (118 in)

Height 4.9 m (193 in)

Transport dimensions

Part 1 length 18.8 m (61.7 ft)

Part 1 width 3.0 m (118 in)

Part 1 height 3.9 m (154 in)

Crushing Unit Specifications

in Action

Crushing Unit Specifications

in Action

PAGE 23

Key specications UJ640 Comfort UJ640 Direct UJ540

Equipment CJ615 Jaw CJ615 Jaw CJ612 Jaw

Max feed size 975mm (38 in) 975mm (38 in) 975mm (38 in)

C ap ac it y up t o 110 0 m tp h (1 21 3 s tp h) 11 00 mt ph ( 12 13 st ph ) 8 00 mt ph ( 882 s tp h)

Total weight 128.5 t (141.6 st) 124.0 t (136.7 st) 97.0 t (106.9 st)

Part 1 68.5 t (75.5 st) 68.0 t (75.0 st) 46.0 t (50.7 st)

Part 2 62.0 t (68.3 st) 56.0 t (61.7 st) 51.0 t (56.2 st)



Width 4.8 m (189 in) 4.8 m (189 in) 3.5 m (138 in)

Height 6.6 m (260 in) 5.7 m (224 in) 5.8 m (228 in)


Part 1 length 10.6 m (34.8 ft) 6.4 m (21.0 ft) 15.1 m (49.5 ft)

Part 1 width 3.8 m (150 in) 3.7 m (146 in) 3.5 m (138 in)

Part 1 height 3.9 m (154 in) 3.9 m (154 in) 3.9 m (154 in)

Part 2 length 15.5 m (50.9 ft) 14.6 m (47.9 ft) 8.9 m (29.2 ft)

Part 2 width 4.0 m (157 in) 4.0 m (157 in) 3.4 m (134 in)

Part 2 height 4.1 m (161 in) 4.1 m (161 in) 3.8 m (150 in)

Key specications UJ440i Comfort UJ440i Classic UJ440i Trend

Equipment CJ412 Jaw CJ412 Jaw CJ412 Jaw

Max feed size 760 mm (30 in) 760 mm (30 in) 760 mm (30 in)

Capacity up to 700 mtph (772 stph) 700 mtph (772 stph) 700 mtph (772 stph)

Weight 62.5 t (68.9 st) 63.0 t (69.4 st) 74.0 t (81.6 st)



Width 3.1 m (122 in) 3.1 m (122 in) 3.6 m (142 in)

Height 4.3 m (169 in) 4.3 m (169 in) 4.9 m (193 in)Transport dimensions


Width 3.0 m (118 in) 3.0 m (118 in) 3.4 m (134 in)

Height 3.9 m (154 in) 3.9 m (154 in) 3.9 m (154 in)

CRUSHING UNIT SPECIFICATIONS



O P T I O N S

Screening Unit Specifications

in Action

PAGE 25

SCREENING UNIT SPECIFICATIONS

Key specications QA450 Triple deck screen QA440 Doublescreen QE440 Scalping screen

Equipment Triple deck Doublescreen Two deck Doublescreen Double deck scalping screen

Max feed size 200/150 mm (8/6 in) 200/150 mm (8/6 in) 800mm (31.5 in)

Capacity up to 600 mtph (661 stph) 600 mtph (661 stph) 600 mtph (661 stph)

Weight 35.0 t (38.6 st) 30.5 t (33.6 st) 36.0 t (39.7 st)



Width 18.4 m (60.4 ft) 18.4 m (60.4 ft) 14.56 m (47.8 ft)

Height 6.5 m (256 in) 6.7 m (264 in) 4.67 m (15.3 ft)



Width 2.9 m (114 in) 2.9 m (114 in) 3.19 m (10.5 ft)

Height 3.8 m (150 in) 3.8 m (150 in) 3.40 m (11.2 ft)



PAGE 28

CRUSHING UNIT OPTIONS

UJ640 UJ540 UJ440i

Comfort

UJ440i

Classic

UJ440i

Trend

UJ440E UH640 UH440i US440i

Sandvik wear protection in feed hopper

and foldable hopper sidesl l

Sandvik rubber lined feeder pan l l l

Sandvik rubber lined hopper on belt

conveyor l l

Hanging screen module with open circuit

Screen 1500x3000 1d incl. 2 prod. con-veyors. (Comfort and Classic only)

l l l l

Extra shims behind the jaw plates l l l l l l

Support frame for separate transport of

feed station (Comfort and Classic only)l l

Extra power outlet for external screening

stationl

Synthetic oil for the CH660 l

ASRi l l l

Extra mast with ood lights l

Electric conveyor heating (per pce) l

Hanging screen module, Open Circuit l l l l

Hanging screen module, Closed Circuit l l

Separate product conveyor coarse

fractionl l

Crushing Unit Options

in Action

Note. l Option

l Available as standard

Crushing Unit Options

in Action

PAGE 27

CRUSHING UNIT OPTIONS

UJ640 UJ540 UJ440i

Comfort

UJ440i

Classic

UJ440i

Trend

UJ440E UH640 UH440i US440i

Overband magnet l l l l l l

Dust flter l l l l l l l l l

NF conveyor incl. Support (8m x

800mm)l l

NF conveyor 8m x 650mm l

NF conveyor 8m x 500mm l

NF conveyor incl. support details (7,2m

x 500mm)l l l

Belt scale for NF conveyor l l

Automatic lubrication system for the jaw

crusher l l l l l l

Hydraulic hammer set. Complete Ram-

mer system BR927 and BB285 incl.

Hydraulics and brackets

l l l

Hydraulic hammer set. Complete with

hammer and boom. (Type BR927 and

BB1425)

l l l

Preparation for hydraulic hammer (type

BR927)l l l l l l

Water spray system (Spray nozzles both

on crusher and discharge conveyor)l l l l l l l l

Belt scale on discharge conveyor l l l l l l l l

Belt scale for product conveyor 1 l l l l l

Product conveyor 2 800mm x 8m (Prod-

uct conv 1 is included as standard)l l l

Belt scale for Product conveyor 2 l l l l l l

Flood lights on crawlers l l l l l l l l

Diesel driven heater for the engine l l l l l l l l l

Extra lifting arrangement for shipping l l l l l l l

Removable side wall extensions on the

feed hopper l l l l

Radio Remote control l l l l l l l l l

King pin for dolly (2 pcs.) l l l l

Adaption Mines and quarries for UK l l l l l l

Complete manometer & O-ring set l l l l l

Complete Filter set frst service l l l l l l

Level indicator for stock pile at dis-

charge end. Recomended to be used on

UJ440i discharge conveyor in combina-

tion with option CM36 on US440i and

UH440i

l l l l l

Note. l Option




Screening Unit Options

in Action

SCREENING UNIT OPTIONS

PAGE 29

QA450 QA440 QE440

Hopper Hardox Liner Plates Back & Sides l l

Central Auto Lube l l l

Dust Suppression Including Canvas Covers l l l

Remote Diesel Pump l l l

Water Pump l l l

20°c Arctic Package l l l

30°c Arctic Package l l l

Tropical / High ambient package l l l

Double Deck Vibrating Grid l l

Hardox Spreader Plate l l

Top Deck Rubber Screening Mats l l

Double Shaft Shredder unit l

Weigh Scale l l

Side Conveyor Feed Boot Hardox Lined l l l

Roll Back Flaps l l

Main Conveyor Lift Rams l l

Radio Controlled Tracks l l l

Lighting Masts l l l

Overband magnet & frame l l

Punch Plate on top Deck l

Bofar Steel Grizzly on Top Deck l

Bofar Steel Grizzly and Top Deck Punched Plate l

Heavy Duty Tines on Top Deck l

Cascade Fingers on Bottom Deck l

One Bofar Steel Grizzly and Top Deck Tines l

Wheeled Dolly l l

Note. l Option




AFTERSALES SUPPORT

Aftersales support

in Action

PAGE 31

At Sandvik, we believe that the sale of our machinery is the beginning of

our relationship with our customers – not the end.

State of the art mobile crushing and screening systems require the verybest in aftersales support. Here at Sandvik we don’t just make the mostinnovative, versatile and productive crushing and screening systems inthe world - we have also invested in the most comprehensive customersupport operation in the industry. The combined experience of Sandvik Parts Support team adds up tohundreds of years and ensures that you, the customer, receive the verybest parts support service that the industry can offer. The in-housetrained Sandvik service and technical engineering team offer bespokecustomer solutions which are the envy of the crushing and screeningworld. Your initial purchase is only the beginning of a unique partnership withSandvik. Our service team is here to help and guide you, and to supportyour needs throughout the long profitable lifetime of your machines.Sandvik’s global network of aftersales, and service engineers, use thevery latest technology, and by working in conjunction with our globaldealership network they ensure help is always at hand.

When you purchase a world leading Sandvik mobile crusher or screen,you know you’ll get a lifetime of the best aftermarket care there is.



MOBILE CRUSHING AND SCREENING RANGE

Mobile Crushing and Screening

Range

PAGE 33

In the spring of 2007 Sandvik acquired two manufacturers of mobilecrushing and screening equipment - Extec Screens and Crushers Ltd,and Fintec Crushing and Screening Ltd. As leaders in the design andmanufacture of mobile crushing and screening equipment, Extec andFintec complement Sandvik’s customer offering with mid-size and lightequipment, thereby positioning Sandvik as a market l eading supplier in arapidly growing industry.

Sandvik now offers a wide range of light, medium and heavy mobilecrushing, screening and scalping solutions for quarrying, recycling,demolition, contracting and mining applications. Our mobile units meetthe very highest specifications for mobility, both on site and on roadtransportation. Fully tracked, they are compact, highly productive, andoffer the very highest levels of performance - either as standalone unitsor in conjunction with other members of the range.

WHEELED MOBILES

C on e c ru sh er I mp ac t c ru sh er Screen

UH421 UV320 UF320

UH320

Jaw

crusher

Cone

crusher

Impact

crusher

Screen Scalper

QJ340 QH330 QI430 QA450 QE440

QJ330 QI340 QA440 QE340

QJ240 QA430 QE330

QA340 QE140

QA330

QA240

QA140

MID-RANGE MOBILES





w w w . s a n d v i k . c o m

Sandvik is a high-technology engineering group withworld-leading positions in selected areas – tools for metalworking, advanced materials technology, and mining andconstruction. We are represented in 130 countries.

Sandvik Mining and Construction represents one third of the overall Sandvik Group and serves a broad range of customers in construction, mineral exploration, miningand bulk materials handling. Our construction expertise

covers quarrying, tunneling, demolition and recycling, andother civil engineering applications. Our mining productsand services support customers on the surface and underground, in all mineral, coal and metal mining applicationsfrom exploration to ore transportation.

Documents

Heavy-range Broch Lowq