Embed Size (px)
Citation preview
GRUNDFOS WASTEWATER
Heavy-duty submersible sewage pumps 15 - 155 kW
Grundfos offers a full range of extremely depend-able, powerful sewage pumps, designed for hand-ling unscreened raw sewage. Our more thanforty years’ experience in providing specialisedpumps and pumping equipment for all kinds ofwastewater and sewage has taught us what ourcustomers demand from a sewage pump:
Large, powerful pumps for handling unscreened raw sewage
Powerful advantages
> Higher pump efficiency over time
State-of-the-art technology makes the Grundfospumps extremely efficient and highly depend-able. Innovative features such as the uniqueSmartTrim adjustment of impeller clearanceprovide low Cost of Ownership.
> Less downtime
The excellent solids handling capability of ourchannel-impeller pumps guarantees maximumoperating time and substantial reductions inmaintenance costs caused by pump jamming or clogging.
> Lifelong reliability
The sturdy sewage pumps are designed forcontinuous pumping under the most difficultoperating conditions. The well-proven design is based on our long experience in the waste-water business.
At Grundfos we maintain a close dialogue withour customers to constantly improve pumpdesign and performance. Only this way can webuild the long-lasting partnerships on whichour business is founded.
Grundfos
> 2
> 3
Installation options
Submerged installation on auto-coupling, types 1 and 2Submerged installation on auto-coupling system requires a base plate with a 90°bend, fixed to the bottom of the pit. When lowered into the pit along the guiderails, the pump automatically connects to the base plate. The flexible neopreneSmartSeal ensures a leak-proof connection between the pump and the auto-coupling.
Type 1: To prevent sedimentation of sludge in connection with intermittent operation, werecommend a stop level corresponding to the top of the pump housing. For sufficientcooling in connection with continuous operation, the liquid level must always beabove the middle of the motor.
Type 2: Motor cooling is independent of the pumped liquid level, thanks to separate motorcooling.
Vertical dry installation, type 3The Grundfos sewage pumps can be installed either vertically or horizontally tosuit specific application arrangements. All pumps are 100% watertight, allowingfor dry installation with the workspace around the pump remaining clean and dry.The pumps are fully flood-proof if an unexpected flooding should occur.
Motor cooling takes place by means of a cooling jacket.
Submerged installation, portable, types 4 and 5Certain applications, such as construction sites, require portable submersibles. Where aportable submersible is required, hoses of varying lengths and materials can be supplied.
Type 4: To prevent sedimentation of sludge in connection with intermittent operation, werecommend a stop level corresponding to the top of the pump housing. For sufficientcooling in connection with continuous operation, the liquid level must always beabove the middle of the motor.
Type 5: Motor cooling is independent of the pumped liquid level, thanks to separate motor cooling.
Horizontal dry installation, type 6Horizontal dry installation improves the overall efficiency of the system as unneces-sary components and bends are avoided. The feasibility of horizontal dry installationdepends on the floor space available as the system takes up slightly more spacethan a vertically installed pump.
Motor cooling takes place by means of a cooling jacket.
4
Tough and reliable pumps…
The Grundfos submersible sewage pumps are designed to reduce energyconsumption and to keep downtime costs at a minimum. Maintaining peakefficiency throughout the entire lifetime of the system is a key issue:
Lower bearings comprise a doublebearing. Certain models feature anadditional radial bearing.
Watertight encapsulated motor,insulation class F (155° C), enclosureclass IP 68, with three thermalsensors in the stator windings.
Seal condition monitoring. A monitoringprobe in the oil housing gives early warningof seal leakage (optional).
The Grundfos SmartSealgasket system provides a completely leak-proof connection.
Double mechanical shaft seal systemin intermediate oil chamber for reliablesealing between the pumped liquidand the motor. Primary seal withSiC/SiC rings, and SiC/carbon rings in the secondary seal.
5 Details > 5
– with many unique features
Watertight cable entry ofcorrosion-resistant polya-
mide, or cast iron with softshapes to prevent damage
to the power cable.
Dynamically balancedpump shaft of stainlesssteel or fully protected
against contact withpumped liquid. Conical
shaft end for safe securing of impeller.
SmartTrim system allows easy adjustment
of factory-set impellerclearance, maintaining
maximum pump efficiency.
In horizontal or vertical dry installations, Grundfos
pumps are equipped with acooling jacket. (See page 7
for more details).
Moisture detector continuously monitors
the motor enclosure, and automatically cuts off the
power in the eventof leakage.
Shaft seal > 6
Advanced sealing technology
30 metres of backflow without non-return valvesThe Mäntymäki pumping station in Helsinki, Finland,is regarded as a major step forward in the moderni-sation of the city’s sewage treatment. The projectaddresses the rising growth in the capital’s popula-tion and the consequent increasing pressure on theexisting infrastructure.
Automatic flushing of wet pitsThe shaft seals of Grundfos pumps are capable ofrotating in either direction. When pumps are installedwith separate pipework, sludge sedimentation canbe effectively avoided by back flushing the systemat regular intervals.
Extended pump lifeTrouble-free shaft seal operation is ensured by springslocated inside the oil chamber. The springs are com-pletely isolated from the pumped liquid. Automaticremoval of air and grit from the seal area, in combi-nation with silicon carbide primary seal faces is thebest guarantee for trouble-free operation and ex-tended pump life.
Reduced dry pit installation costsIn pumping stations with separate pipework foreach pump, costly non-return valves can be avoided.
The Mäntymäki pumping station has been excavatedfrom solid granite rock, 30 metres below ground. Itserves as a collection point for sewage from thecentral part of Helsinki and is designed to handle93,000 m3/day. It is equipped with four Grundfossewage 130 kW pumps, horizontally dry installedwith cooling jackets.
The horizontal installation is favoured since it makesfor simplified pipework. The enhanced fluid dynamicsthat this installation offers enables the pumps torun more smoothly thanks to the uniform suctionof the impeller.
An interesting feature of this application is theomission of non-return valves. When the pumps arestopped, the entire water column flows back throughthe pumps which serves to clean the pumps andflush the suction chamber. This eliminates cloggingand surface as well as bottom sedimentation with-out any manual intervention. All four pumps featurethe unique SmartTrim impeller adjustment system.Compensation for impeller wear over time can bemade on site simply by adjusting three screws on theimpeller housing. This enables that optimum pump-ing efficiency can be maintained at all times.
Motor > 7
Operating conditions
Vertically installed pumps with cooling jacket
Horizontally installed pumps with cooling jacket
Efficient cooling of motors in dry installations
In dry applications, efficient cooling of the pumpmotor is essential. This is achieved through a cool-ing jacket encasing the stator housing.The cooling liquid is led into the cooling jacketvia a cutting clearance behind the impeller. Anintegrated screening system prevents solids fromentering the cooling jacket.At start-up, the cooling jacket is automaticallyfilled with screened pumped liquid. The systemis a closed circuit, transferring excess heat fromthe motor back to the pumped liquid.
Operating conditions
Pump usage is restricted by the following limits:
• Maximum ambient temperature andpumped liquid temperature: +40°C
• Storage temperature range: –30°C to +60°C
• Maximum submergence: 20 m
• Voltage tolerance for 3 x 400 V 50 Hz motors: ± 10 %
Maximum starting frequency
The starting frequency should not exceed 15 startsper hour. For short periods of time starting fre-quency of up to double the recommended fre-quency is permissible.
Channel impellers > 8
Efficient impeller design
Non-clogging impeller vane designConventional double-channel impellers are susceptible to clogging, as fibrous material tendsto enter both channels and get caught on theleading edge. But thanks to the recessed leadingedge design of the Grundfos double-channelimpeller, the problem of clogging is virtuallyeliminated.
Tested under real conditions, this special double-channel impeller design combined with a freepassage of minimum 100 mm enable the Grundfosdouble-channel impellers to handle unscreenedsewage in heavy-duty applications. Maximumefficiency is 80-85%.
Large free passage for superior solids handlingCompromising on the ability to handle solids inorder to obtain higher pumping efficiency sub-stantially increases the risk of clogging. Moreclogging means more downtime and increasedoperating costs.
The Grundfos channel-impeller pumps are capableof handling solids up to Ø 145 mm. The full freepassage, however, is much larger. The result isless clogging and less downtime.
Semi-axial long-vane impeller designThe length of an impeller vane is a key factor indetermining the length of fibres that can passthrough a pump without getting caught. TheGrundfos channel-impellers are of semi-axialdesign with extra long vanes. This provides maxi-mum performance and eliminates problems withfibres or rags getting caught in the impeller.
SmartTrim impellers > 9
Grundfos SmartTrim impellers
SmartTrim impellerclearance adjustmentThe Grundfos heavy-duty sewage pumps are de-signed to reduce energy consumption and to keepdown operating costs at a minimum. Therefore,maintaining peak pumping efficiency throughoutthe entire lifetime of the system is a key issue.
Sand, grit and other abrasives cause impeller wear inany pump. As a result, impeller clearance increases,reducing pump efficiency. Increased impeller clear-ance means more back-flow leakage and a higherrisk of jamming.
SmartTrim system – fast, easy and efficientOn conventional pumps, maintaining factory-setimpeller clearance is a time-consuming and costlytask. The pumps need to be disconnected from thepipework and to be totally dismantled, and newparts need to be mounted in order to maintain fullpumping efficiency. Not so with Grundfos SmartTrim! 1
0
3
6
9
12
15
2 3 4 5
Efficiencydrop in %
With Grundfos SmartTrim impeller clearance adjustment system
Without impeller clearance adjustment system
Years
Factory-set impeller clearance
A
B
A
B
All Grundfos heavy-duty channel-impeller pumps,whether for submerged or dry installation, are equip-ped with the unique SmartTrim impeller clearanceadjustment system. This enables you to easily re-store factory-set impeller clearance and maintainpeak pumping efficiency. All you need to do is totighten the adjustment screws on the exterior of theimpeller housing. This can be done on site, quicklyand easily, without dismantling the pump and with-out using special tools.
Position of SmartTrim system for horizontally dry installed pumps Position of SmartTrim system on vertically submerged pumps
Technical data > 10
Performance overview and type key
Performance overview – Grundfos range of submersible sewage pumps
Type key
1
2
3
45
7
8
6
9
5 1010 20 30 40 60 80 100 200 300 400 60 0 101000 2000 3000
2
3
4
6
8
10
20
30
40
60
80
100
20 40 60 80 100 200 400 600 1000 2000 4000
50 Hz
Q [l/s]
H [m]
Q [m3/h]
Example S2 304 AL1 S 2 30 4 A L 1Sewage pumpType of impeller1 = Single-channel2 = Two-channel3 = Three-channelVersionBlank = Non-explosion-proof motorX = Explosion-proof motorRated motor power PN in kWNumber of polesPump generationHead classificationE = Extra low head L = Low head M = Medium headH = High head S = Super-high headType of installation1 = Submerged installation on auto-coupling2 = Submerged installation on auto-coupling Motor cooling independent of pumped liquid level See page 73 = Vertical dry installation4 = Submerged installation, portable5 = Submerged installation, portable Motor cooling independent of pumped liquid level See page 76 = Horizontal dry installation
1 Low head ranges 58 and 62 2 Low head, E hydraulic ranges 58 and 62 3 Low head ranges 66 and 70 4 Low and medium head ranges 66 and 70 5 Medium and high head ranges 58 and 62 6 Medium and high head ranges 66 and 70 7 High and super-high head ranges 66 and 70 8 SuperVortex impeller and channel-impeller pumps 1.65 kW to 29 kW* 9 Channel-impeller pumps 160 kW to 520 kW* * See separate brochure
Area Description
Note!The technical data and curves on pages 11, 12, 13, and 14 apply to pumps ininstallation type 1 (submerged installation with baseplate and bend) only.Data and curves for other installation types, as well as for explosion-proofpumps, may vary. Consult Grundfos for details or visit our site onwww.grundfos.com.
Technical data > 11
Technical data
Low head, ranges 58 and 62 Low head, E hydraulic, ranges 58 and 62
Electrical and technical data
Pump curve
No. Pump type IS/IN
Submergedinstallation
Submerged installation, portable
Motor
1 S3 1512 62 Ø 120 Ø 300 860 400 Ø 300 860 - - 15.0 490 2 S2 208 62 Ø 145 Ø 300 780 400 Ø 300 780 - - 20.0 740 3 S2 288 62 Ø 145 Ø 300 900 400 Ø 300 900 - - 28.0 730 4 S2 224 AL 58 Ø 100 Ø 200 510 250 Ø 200 510 Ø 200 510 22.0 1460 5 S2 304 AL 62 Ø 100 Ø 200 650 250 Ø 200 650 - - 30.0 1480 6 S2 264 AL 58 Ø 100 Ø 200 510 250 Ø 200 510 Ø 200 510 26.0(28.0) 1450 7 S2 404 AL 62 Ø 100 Ø 200 695 250 Ø 200 695 - - 41.0(43.0) 1460 8 S2 504 AL 62 Ø 100 Ø 200 720 250 Ø 200 720 - - 50.0 1470 9 S2 156 E 58 Ø 100 Ø 300 600 250 Ø 300 600 Ø 300 600 16.0 970 10 S2 226 E 58 Ø 100 Ø 300 590 250 Ø 300 590 Ø 300 590 22.5 960 11 S2 304 E 62 Ø 100 Ø 300 660 250 Ø 300 660 - - 30.0 1480 12 S2 404 E 62 Ø 100 Ø 300 725 250 Ø 300 725 - - 41.0(43.0) 1460 13 S2 504 E 62 Ø 100 Ø 300 780 250 Ø 300 780 - - 50.0 1470
(): Motor data in brackets apply to installations 2, 3, 5 and 6.
Dry installation
Pump range
Max. solidssize [mm]
Outlet[mm]
Weight[kg]
Weight[kg]
Hose[mm]
Weight[kg]
nN
[min-1]IN 400 V
[A]PN
[kW]InletDN
OutletDN
37.0 4.0 41.0 6.6 55.0 4.9 44.0 6.1 67.0 6.9 50.2(55.6) 5.2(4.7) 84.7(87.0) 5.8(5.6) 101.4 5.2 38.2 5.5 48.6 4.3 67.0 6.9 84.7(87.0) 5.8(5.6) 101.4 5.2
0 40 80 120 160 200 240 280 320 360 400
0
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
0 200 400 600 800 1000 1200 1400
H[m]
S2, S350 Hz
ISO 9906 Annex A
Q [l/s]
Q [m3/h]
4
3
2
1
5
6
7
8
0 40 80 120 160 200 240 280 320 3600
2
4
6
8
10
12
14
16
18
20
0 200 400 600 800 1000 1200
S250 Hz
ISO 9906 Annex A
Q [l/s]
H [m]
Q [m3/h]
1211109 13
Pump range, modular conceptThe Grundfos heavy-duty sewage pumps are of a modular design, meaning that pumps belonging to the samerange share many common spare parts. This allows for interchangeability of impellers and other hydraulics.
Technical data > 12
Technical data
0 100 200 300 400 500 600 700 800 9000
2
4
6
8
10
12
14
16
18
20
22
24
26
28
0 500 1000 1500 2000 2500 3000
S350 Hz
ISO 9906 Annex A
S350 Hz
ISO 9906 Annex A
Q [l/s]
H [m]
Q [m3/h]
109
4321 5 6
7 8
0 50 100 150 200 250 300 350 400 450
0 500 1000 1500
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75 S250 Hz
ISO 9906 Annex A
Q [l/s]
H [m]
Q [m3/h]
11 12
1615 1714
13
Electrical and technical data
Pump curve
No. Pump type IS/IN
Submergedinstallation
Submerged installation, portable
Motor
1 S3 2210 L 66 115x140 Ø 500 830 500 Ø 500 830 - - 22.0 590 2 S3 3510 E 66 125x163 Ø 600 1000 500 Ø 600 1000 - - 35.0 590 3 S3 3510 L 66 115x140 Ø 500 1000 500 Ø 500 1000 - - 35.0 580 4 S3 508 L 66 115x140 Ø 500 1300 500 Ø 500 1300 - - 50.0 730 5 S3 508 E 66 125x163 Ø 600 1400 500 Ø 600 1400 - - 50.0 730 6 S3 658 E 70 125x163 Ø 600 1700 500 Ø 600 1700 - - 65.0 730 7 S3 658 L 70 115x140 Ø 500 1590 500 Ø 500 1590 - - 65.0 730 8 S3 1006 L 70 115x140 Ø 500 1870 500 Ø 500 1870 - - 100.0 980 9 S3 1306 E 70 125x163 Ø 600 2000 500 Ø 600 2000 - - 130.0 980 10 S3 1306 L 70 115x140 Ø 500 1830 500 Ø 500 1830 - - 130.0 980 11 S2 554 BM 66 Ø 100 Ø 200 760 250 Ø 200 760 - - 58.0 1480 12 S2 654 BM 66 Ø 100 Ø 200 840 250 Ø 200 840 - - 68.0 1480 13 S2 654 AL 66 110x130 Ø 250 840 300 Ø 250 840 - - 68.0 1480 14 S2 854 AM 70 Ø 100 Ø 200 1090 250 Ø 200 1090 - - 85.0 1480 15 S2 1154 M 70 100x110 Ø 200 1480 250 Ø 200 1480 - - 115.0 1480 16 S2 1604 M 70 100x110 Ø 200 1350 250 Ø 200 1350 - - 155.0 1480 17 S2 1604 L 70 Ø 110 Ø 250 1430 300 Ø 250 1430 - - 155.0 1480
Dry installation
Pump range
Max. solidssize [mm]
Outlet[mm]
Weight[kg]
Weight[kg]
Hose[mm]
Weight[kg]
nN
[min-1]IN 400 V
[A]PN
[kW]InletDN
OutletDN
55.0 5.1 79.5 4.7 79.5 4.7 101.2 5.4 101.2 5.4 129.0 5.2 121.0 6.1 121.0 6.1 249.3 7.9 249.3 7.9 116.4 7.2 134.9 6.3 134.9 6.3 152.9 6.8 210.0 6.8 278.0 7.5 278.0 7.5
Low head, ranges 66 and 70 Low and medium head, ranges 66 and 70
Technical data > 13
0 10 20 30 40 50 60 70 80 90 100 110 120 1300
5
10
15
20
25
30
35
40
45
50
55
60
65
70
0 100 200 300 400 500
S150 Hz
ISO 9906 Annex A
Q [l/s]
H [m]
Q [m3/h]
7632 4
1
5 8 9 10
0 100 200 300 400 500 600 7000
4
8
12
16
20
24
28
32
36
40
44
48
H [m]
0 500 1000 1500 2000
Q [l/s]
Q [m3/h]
S2, S350 Hz
ISO 9906 Annex A
19 20 21
11 12 13
1517 14 1618
Electrical and technical data
Pump curve
No. Pump type IS/IN
Submergedinstallation
Submerged installation, portable
Motor
1 S1 224 M 58 Ø 110 Ø 150 475 200 Ø 125 475 Ø 150 475 22.0 1458 2 S1 264 M 58 Ø 110 Ø 150 460 200 Ø 125 460 Ø 150 460 26.0(28.0) 1446 3 S1 304 M 62 100x120 Ø 150 650 200 Ø 125 650 - - 30.0 1482 4 S1 224 H 58 Ø 80 Ø 150 470 150 Ø 125 470 Ø 150 470 22.0 1458 5 S1 264 H 58 Ø 80 Ø 150 460 150 Ø 125 490 Ø 150 460 26.0(28.0) 1446 6 S1 304 H 62 Ø 80 Ø 150 670 150 Ø 125 670 - - 30.0 1482 7 S1 404 M 62 100x120 Ø 150 635 200 Ø 125 635 - - 41.0(43.0) 1464 8 S1 504 M 62 100x120 Ø 150 640 200 Ø 125 650 - - 50.0 1470 9 S1 404 H 62 Ø 80 Ø 150 650 150 Ø 125 650 - - 41.0(43.0) 1464 10 S1 504 H 62 Ø 80 Ø 150 650 150 Ø 125 650 - - 50.0 1470 11 S2 358 M 66 Ø 145 Ø 300 965 300 Ø 300 965 - - 35.0 732 12 S3 508 M 66 120x140 Ø 300 1100 400 Ø 300 1100 - - 50.0 726 13 S3 658 M 70 120x140 Ø 300 1520 400 Ø 300 1520 - - 65.0 732 14 S3 806 M 70 120x140 Ø 300 1520 400 Ø 300 1520 - - 80.0 988 15 S3 1006 M 70 120x140 Ø 300 1350 400 Ø 300 1350 - - 100.0 984 16 S3 1306 M 70 120x140 Ø 300 1520 300 Ø 300 1520 - - 130.0 984 17 S2 508 H 66 Ø 120 Ø 250 1110 300 Ø 250 1110 - - 50.0 726 18 S2 658 H 70 Ø 120 Ø 250 1200 300 Ø 250 1200 - - 65.0 732 19 S2 806 H 70 Ø 120 Ø 250 1370 300 Ø 250 1370 - - 80.0 988 20 S2 1006 H 70 Ø 120 Ø 250 1320 300 Ø 250 1320 - - 100.0 984 21 S2 1306 H 70 Ø 120 Ø 250 1320 300 Ø 250 1320 - - 130.0 984
(): Motor data in brackets apply to installations 2, 3, 5 and 6.
Dry installation
Pump range
Max. solidssize [mm]
Outlet[mm]
Weight[kg]
Weight[kg]
Hose[mm]
Weight[kg]
nN
[min-1]IN 400 V
[A]PN
[kW]InletDN
OutletDN
43.0 6.1 50.2(56) 5.2(4.7) 67.0 6.9 43.0 6.1 50.2(55.6) 5.2(4.7) 67.0 6.9 84.7(87.0) 5.8(5.6) 101.0 5.2 84.7(87.0) 5.8(5.6) 101.0 5.2 75.9 4.9 101.2 5.4 121.0 6.1 154.2 8.1 188.5 6.6 249.3 7.9 101.2 5.4 121.0 6.1 154.2 8.1 188.5 6.6 249.3 7.9
Medium and high head, ranges 58 and 62 Medium and high head, ranges 66 and 70
14
Technical data
Technical data >
High and super-high head, ranges 66 and 70
Q [l/s]
H [m]
Q [m3/h]
0 20 40 60 80 100 120 140 160 180 200 220 2400
10
20
30
40
50
60
70
80
90
100
0 100 200 300 400 500 600 700 800
S1, S250 Hz
ISO 9906 Annex A
1 32 4
5 6
Electrical and technical data
Pump curve
No. Pump type IS/IN
Submergedinstallation
Submerged installation, portable
Motor
1 S1 654 AH 66 Ø 100 Ø 200 830 250 Ø 200 830 - - 68.0 1480 2 S1 854 H 70 Ø 100 Ø 200 950 250 Ø 200 950 - - 85.0 1480 3 S2 1154 H 70 Ø 100 Ø 200 950 250 Ø 200 950 - - 115.0 1480 4 S2 1604 H 70 Ø 100 Ø 200 1350 250 Ø 200 1350 - - 155.0 1480 5 S2 1154 S 70 Ø 90 Ø 200 950 250 Ø 200 950 - - 115.0 1480 6 S2 1604 S 70 Ø 90 Ø 200 1350 250 Ø 200 1350 - - 155.0 1480
Dry installation
Pump range
Max. solidssize [mm]
Outlet[mm]
Weight[kg]
Weight[kg]
Hose[mm]
Weight[kg]
nN
[min-1]IN 400 V
[A]PN
[kW]InletDN
OutletDN
134.9 6.3 152.9 6.8 210.0 6.8 278.0 7.5 210.0 6.8 278.0 7.5
Technical data >15
Material specification
Stator housing Cast iron EN-JL1040Pump housing Cast iron EN-JL1040Impeller Impeller cast iron/ductile iron EN-JL1040Pump shaft, pump ranges 58 and 62 Stainless steel 1.4460 329Pump shaft, pump ranges 66 and 70* Steel 1.7225Bolts and nuts Stainless steel 1.4436 316Cooling jacket, pump ranges 58 and 62 Ductile iron EN-JS1050 80-55-06Cooling jacket, pump ranges 66 and 70 Hot dip galvanized steel Rst 37-2O-rings NBRO-rings, mechanical shaft seal FKMBearings Heavy-duty prelubricated ball or roller bearingsPrimary shaft seal SiC/SiCSecondary shaft seal SiC/carbonLifting bracket Hot dip galvanized steel Rst 37-2Cables EPDMCable entry PA/cast ironSurface protection 150 my two-component epoxy coatingOil SAE 10 W 30
* Shaft is not in contact with pumped liquid.
Part Material DIN/EN AISI
Technical data >16
Dimensions and installation
DN A B C D E F G H K L M N O ØP ØR ØS ØT U V X Y ØZPump range/type
58S2 224 AL 200 1410 1195 215 1010 640 290 345 265 250 400 540 600 S2 264 AL 200 1410 1195 215 1010 640 290 345 265 250 400 540 600S1 224 M 150 1365 1210 155 765 472 225 235 225 250 380 280 500S1 264 M 150 1365 1210 155 765 472 225 235 225 250 380 280 500S1 224 H 150 1355 1175 180 785 492 225 240 215 250 380 280 500S1 264 H 150 1355 1175 180 785 492 225 240 215 250 380 280 500S2 156 E 300 1385 1235 150 1230 740 410 470 360 400 400 620 700S2 226 E 300 1385 1235 150 1230 740 410 470 360 400 400 620 70062S2 208 300 1620 1445 175 1310 790 440 525 385 400 400 620 700S2 288 300 1620 1445 175 1310 790 440 525 385 400 400 620 700S3 1512 300 1620 1445 175 1310 790 440 525 355 400 400 620 700S2 304 E 300 1585 1455 130 1390 890 420 485 355 400 400 620 700S2 404 E 300 1585 1455 130 1390 890 420 485 355 400 400 620 700S2 504 E 300 1585 1455 130 1390 890 420 485 355 400 400 620 700S2 304 AL 200 1585 1425 160 1130 750 300 360 275 300 400 540 600S2 404 AL 200 1585 1425 160 1130 750 300 360 275 300 400 540 600 S2 504 AL 200 1585 1425 160 1130 750 300 360 275 300 400 540 600S1 304 M 150 1555 1420 135 830 512 250 260 250 250 380 280 500S1 404 M 150 1555 1420 135 830 512 250 260 250 250 380 280 500S1 504 M 150 1555 1420 135 830 512 250 260 250 250 380 280 500S1 304 H 150 1540 1390 150 830 512 250 260 250 250 380 280 500S1 404 H 150 1540 1390 150 830 512 250 260 250 250 380 280 500S1 504 H 150 1540 1390 150 830 512 250 260 250 250 380 280 50066S3 508 E 600 2015 1765 250 2365 1455 765 885 620 700 700 1000 1100S3 3510 E 600 2015 1765 250 2365 1455 765 885 620 700 700 1000 1100S3 2210 L 500 2000 1680 320 2085 1305 630 715 550 600 700 900 1000S3 3510 L 500 2000 1680 320 2085 1305 630 715 550 600 700 900 1000S3 508 L 500 2000 1680 320 2085 1305 630 715 550 600 700 900 1000S2 358 M 300 1715 1540 175 1310 790 440 525 355 400 400 620 700S2 554 BM 200 1670 1485 185 975 550 350 380 290 300 400 540 600 S2 654 BM 200 1670 1485 185 975 550 350 380 290 300 400 540 600
100 285 285 22 28 460 265 140 20 88100 285 285 22 28 460 265 140 20 88100 240 285 22 24 320 265 115 165 77100 240 285 22 24 320 265 115 165 77100 240 285 22 24 320 265 115 165 77100 240 285 22 24 320 265 115 165 77150 400 445 23 28 500 420 205 270 88150 400 445 23 28 500 420 205 270 88
150 400 445 23 28 500 420 205 270 88150 400 445 23 28 500 420 205 270 88150 400 445 23 28 500 420 205 270 88150 400 445 23 28 500 420 205 270 88150 400 445 23 28 500 420 205 270 88150 400 445 23 28 500 420 205 270 88150 295 340 22 28 460 320 140 20 88150 295 340 22 28 460 320 140 20 88150 295 340 22 28 460 320 140 20 88100 240 285 22 24 320 320 115 165 77100 240 285 22 24 320 320 115 165 77100 240 285 22 24 320 320 115 165 77100 240 285 22 24 320 265 115 165 77100 240 285 22 24 320 265 115 165 77100 240 285 22 24 320 265 115 165 77
250 725 780 30 28 800 755 75 30 114250 725 780 30 28 800 755 75 30 114250 620 670 27 28 800 655 75 30 88250 620 670 27 28 800 655 75 30 88150 400 445 23 28 500 420 205 270 88150 295 340 22 28 460 320 140 20 88150 295 340 22 28 460 320 140 20 88150 295 340 22 28 460 320 140 20 88
Dimensions [mm]
Submerged installation on auto-coupling
Pump ranges 58, 62, 66 and 70
(Cont. next page).
17 Technical data >
Pump ranges 58, 62, 66 and 70
DN A B C D E F G H K L M N O ØP ØR ØS ØT U V X Y ØZPump range/type
66S3 508 M 300 1915 1765 150 1310 790 440 525 355 400 400 620S2 508 H 250 1700 1535 165 1365 840 445 480 400 350 400 620S2 654 AL 250 1685 1515 170 1240 840 320 395 320 350 400 620S1 654 AH 200 1675 1495 180 1050 690 285 305 290 300 400 54070S3 658 E 600 2015 1765 250 2365 1455 765 885 620 700 700 1000S3 1306 E 600 2015 1765 250 2365 1455 765 885 620 700 700 1000S3 658 L 500 2130 1810 320 2085 1305 630 715 550 600 700 900S3 1006 L 500 2130 1810 320 2085 1305 630 715 550 600 700 900
700 150 400 445 23 28 500 420 205 270 88 700 150 350 395 23 28 500 370 205 270 88 700 150 350 395 23 28 500 370 205 270 88 600 150 295 340 22 28 460 320 140 20 88
1100 250 725 780 30 28 800 755 75 30 114 1100 250 725 780 30 28 800 755 75 30 114 1000 250 620 670 27 28 800 655 75 30 88 1000 250 620 670 27 28 800 655 75 30 88
Dimensions [mm]
Submerged installation, portable Pump ranges 58, 62, 66 and 70
58S2 224 AL 200 1390 550 1265 345 275 620 815 380S2 264 AL 200 1390 550 1265 345 275 620 815 380S1 224 M 150 1345 550 955 235 225 550 640 360S1 264 M 150 1345 550 955 235 225 550 640 360S1 224 H 150 1315 550 975 240 215 550 620 340S1 264 H 150 1315 550 975 240 215 550 620 340S2 156 E 300 1350 700 1695 470 360 830 970 370S2 226 E 300 1350 700 1695 470 360 830 970 37062S2 304 AL 200 1555 700 1435 360 350 710 805 370S2 404 AL 200 1555 700 1435 360 350 710 805 370S2 504 AL 200 1555 700 1435 360 350 710 805 370S1 304 M 150 1540 700 1070 260 250 510 645 365S1 404 M 150 1540 700 1070 260 250 510 645 365S1 504 M 150 1540 700 1070 260 250 510 645 365S1 304 H 150 1530 700 1070 260 250 510 650 370S1 404 H 150 1530 700 1070 260 250 510 650 370S1 504 H 150 1530 700 1070 260 250 510 650 37066S2 358 M 300 1765 700 1775 525 355 880 1050 450S2 554 BM 200 1680 700 1235 290 290 580 825 405S2 654 BM 200 1680 700 1235 290 290 580 825 405S3 508 M 300 1765 700 1775 525 355 880 1050 450S2 508 H 250 1760 700 1720 480 390 870 980 460S2 654 AL 250 1700 700 1630 395 320 715 935 415S1 654 AH 200 1695 700 1375 305 290 595 850 41570S3 658 M 300 1890 700 1910 570 445 1015 1050 450S3 806 M 300 1890 700 1910 570 445 1015 1050 450S3 1006 M 300 1890 700 1910 570 445 1015 1050 450S3 1306 M 300 1890 700 1910 570 445 1015 1050 450S2 854 AM 200 1805 700 1235 285 285 730 840 405S2 1154 M 200 1830 700 1325 320 290 610 850 415S2 1604 M 200 1830 700 1325 320 290 610 850 415S2 658 H 250 1890 700 1720 480 390 870 980 460S2 806 H 250 1890 700 1720 480 390 870 980 460S2 1006 H 250 1890 700 1720 480 390 870 980 460S1 854 H 200 1820 700 1375 305 290 595 850 415S2 1154 H 200 1825 700 1375 305 290 595 855 420S2 1604 H 200 1825 700 1375 305 290 595 855 420S2 1154 S 200 1980 700 1525 350 310 660 855 420
DN A B C D E F G HPump range/type
Dimensions [mm]
Technical data >18
Dimensions and installation
DN1 DN2 A B C D E F G H ØJ ØK ØL ØM ØN ØPPump range/type
58S2 224 AL 250 200 2112 1106 828 840 550 670 400 30° M20 350 340 295 28S2 264 AL 250 200 2112 1106 828 840 550 670 400 30° M20 350 340 295 28S1 224 M 200 125 1962 980 697 635 400 470 350 30° M20 295 250 210 24S1 264 M 200 125 1962 980 697 635 400 470 350 30° M20 295 250 210 24S1 224 H 150 125 1826 853 600 655 420 470 300 30° M20 240 250 210 24S1 264 H 150 125 1826 853 600 655 420 470 300 30° M20 240 250 210 24S2 156 E 250 300 2120 1140 825 1060 650 830 400 30° M20 350 470 400 28S2 226 E 250 300 2120 1140 825 1060 650 830 400 30° M20 350 470 400 2862S2 208 300 300 2170 1490 1152 1140 700 910 630 30° M24 515 470 400 28S2 288 300 300 2170 1490 1152 1140 700 910 630 30° M24 515 470 400 28S3 1512 300 300 2170 1490 1152 1140 700 910 630 30° M24 515 470 400 28S2 304 E 250 200 2350 1160 825 1220 800 870 400 30° M20 350 370 400 28S2 404 E 250 200 2350 1160 825 1220 800 870 400 30° M20 350 370 400 28S2 504 E 250 200 2350 1160 825 1220 800 870 400 30° M20 350 370 400 28S2 304 AL 250 125 2305 1120 825 960 660 670 400 30° M20 350 340 295 28S2 404 AL 250 125 2305 1120 825 960 660 670 400 30° M20 350 340 295 28S2 504 AL 250 125 2305 1120 825 960 660 670 400 30° M20 350 340 295 28S1 304 M 200 125 2140 968 697 690 440 552 350 30° M20 295 250 210 24S1 404 M 200 125 2140 968 697 690 440 552 350 30° M20 295 250 210 24S1 504 M 200 125 2140 968 697 690 440 552 350 30° M20 295 250 210 24S1 304 H 150 125 2055 895 600 690 440 513 300 30° M20 240 250 210 24S1 404 H 150 125 2055 895 600 690 440 513 300 30° M20 240 250 210 24S1 504 H 150 125 2055 895 600 690 440 513 300 30° M20 240 250 210 2466S2 358 M 300 300 2805 1490 1152 1140 700 880 630 30° M24 515 470 400 28S2 554 BM 250 200 2335 1065 825 810 460 700 400 30° M20 350 340 295 28S2 654 BM 250 200 2335 1065 825 810 460 700 400 30° M20 350 340 295 28S3 508 M 300 300 2805 1490 1152 1140 700 880 630 30° M24 515 470 400 28S2 508 H 300 250 2410 1110 855 1190 750 870 450 30° M20 400 395 350 28S2 654 AL 300 250 2395 1110 855 1070 750 715 450 30° M20 400 406 350 28S1 654 AH 250 200 2335 1075 825 890 600 595 400 30° M20 350 340 295 28
Dimensions [mm]
2424191919192424
242424242424242424191919191919
24242424242424
Vertical dry installation
Pump ranges 58, 62, 66 and 70
(Cont. next page).
19 Technical data >
Pump ranges 58, 62, 66 and 70
DN1 DN2 A B C D E F G H ØJ ØK ØL ØM ØN ØPPump range/type
70S3 658 M 300 300 2930 1490 1152 1275 760 1015 630 30° M24 515 470 400 28S3 806 M 300 300 2930 1490 1152 1275 760 1015 630 30° M24 515 470 400 28S3 1006 M 300 300 2930 1490 1152 1275 760 1015 630 30° M24 515 470 400 28S3 1306 M 300 300 2930 1490 1152 1275 760 1015 630 30° M24 515 470 400 28S2 854 AM 250 200 2405 1065 825 810 460 700 400 30° M20 350 340 295 28
Dimensions [mm]
2424242424
Pump ranges 66 and 70
DN1 DN2 A B C D E F G H K L M N ØOPump range/type
66 S3 508 E 500 600 1550 534 550 2115 1350 1505 620 800 1100 1180 700 300 28S3 3510 E 500 600 1550 534 550 2115 1350 1505 620 800 1100 1180 700 300 28S3 2210 L 500 500 1300 479 495 1830 1200 1270 550 800 1100 1180 700 300 27S3 3510 L 500 500 1300 479 495 1830 1200 1270 550 800 1100 1180 700 300 27S3 508 L 500 500 1300 479 495 1830 1200 1270 550 800 1100 1180 700 300 2770 S3 658 E 500 600 1600 534 550 2115 1350 1505 620 800 1100 1180 700 300 28S3 1306 E 500 600 1600 534 550 2115 1350 1505 620 800 1100 1180 700 300 28S3 658 L 500 500 1425 479 495 1830 1200 1270 550 800 1100 1180 700 300 28S3 1006 L 500 500 1425 479 495 1830 1200 1270 550 800 1100 1180 700 300 28S3 1306 L 500 500 1425 479 495 1830 1200 1270 550 800 1100 1180 700 300 28
Dimensions [mm]
Vertical dry installation
Technical data >20
Dimensions and installation
DN1 DN2 A B C D E F G H K ØL M N O PPump range/type
58S2 224 AL 250 200 1273 1015 – 925 550 670 380 267 – 18 500 – 115S2 264 AL 250 200 1273 1015 – 925 550 670 380 267 – 18 500 – 115S1 224 M 200 125 1262 815 – 775 400 536 235 280 – 18 500 – 115S1 264 M 200 125 1262 815 – 775 400 536 235 280 – 18 500 – 115S1 224 H 150 125 1223 815 – 795 420 450 237 250 – 18 500 – 115S1 264 H 150 125 1235 815 – 795 420 450 237 250 – 18 500 – 115S2 156 E 250 300 1285 – – 1200 650 830 – 330 – – 500 – 115S2 226 E 250 300 1285 – – 1200 650 830 – 330 – – 500 – 11562S2 208 300 300 1550 820 – 1250 700 910 525 330 – 18 600 – 50S2 288 300 300 1550 820 – 1250 700 910 525 330 – 18 600 – 50S3 1512 400 300 1550 – – 1250 700 910 525 330 – 18 500 – –S2 304 E 250 300 1550 820 – 1250 800 840 485 330 – 18 500 – 100S2 404 E 250 300 1550 820 – 1250 800 840 485 330 – 18 500 – 100S2 504 E 250 300 1550 820 – 1250 800 840 485 330 – 18 500 – 100S2 304 AL 250 200 1465 820 – 1035 660 630 360 280 – 18 500 – 115S2 404 AL 250 200 1465 820 – 1035 660 630 360 280 – 18 500 – 115S2 504 AL 250 200 1465 820 – 1035 660 630 360 280 – 18 500 – 115S1 304 M 200 125 1440 820 – 815 440 510 260 265 – 20 500 – 115S1 404 M 200 125 1440 820 – 815 440 510 260 265 – 20 500 – 115S1 504 M 200 125 1440 820 – 815 440 510 260 265 – 20 500 – 115S1 304 H 200 150 1455 820 – 815 440 510 260 265 – 20 500 – 115S1 404 H 200 150 1455 820 – 815 440 510 260 265 – 20 500 – 115S1 504 H 200 150 1455 820 – 815 440 510 260 265 – 20 500 – 11566S3 508 E 500 600 2050 1400 750 2150 1350 1505 885 550 840 28 600 600 850S3 3510 E 500 600 2050 1400 750 2150 1350 1505 885 550 840 28 600 600 850S3 2210 L 400 500 1740 1400 500 1900 1200 1270 720 335 740 28 600 600 600S3 3510 L 400 500 1740 1400 500 1900 1200 1270 720 335 740 28 600 600 600S3 508 L 400 500 1740 1400 500 1900 1200 1270 720 335 740 28 600 600 600S2 358 M 300 300 1540 1000 – 1250 700 880 525 217 450 24 450 450 417S2 554 BM 250 200 1500 1000 – 860 460 700 290 210 400 28 450 450 453
375 390 450375 390 450375 390 450375 390 450375 390 450375 390 450550 390 – 550 390 –
500 600 760500 600 760550 600 660550 390 450550 390 450550 390 450375 390 450375 390 450375 390 450375 390 450375 390 450375 390 450375 390 450375 390 450375 390 450
800 700 760800 700 760700 700 760 700 700 760 700 700 760550 700 760400 700 760
Dimensions [mm]
Q R
Horizontal dry installation
Pump ranges 58, 62, 66 and 70
(Cont. next page).
21 Technical data >
Pump ranges 58, 62, 66 and 70
DN1 DN2 A B C D E F G H K ØL M N O PPump range/type
66S2 654 BM 250 200 1500 1000 – 860 460 700 290 210 400 28 450 450 453S3 508 M 300 300 1615 1000 – 1200 700 880 525 320 470 24 450 450 590S2 508 H 300 250 1600 1000 – 1250 750 870 480 290 470 24 450 450 554S2 654 AL 300 250 1550 1000 – 1300 750 730 410 227 470 28 450 450 559S1 654 AH 250 200 1525 1000 – 1000 600 595 305 225 400 24 450 450 46370S3 658 E 500 600 2050 1400 750 2150 1350 1505 885 550 840 28 600 600 850S3 1306 E 500 600 2050 1400 750 2150 1350 1505 885 550 840 28 600 600 850S3 658 L 400 500 1740 1400 500 1900 1200 1270 720 335 740 28 600 600 600S3 1006 L 400 500 1740 1400 500 1900 1200 1270 720 335 740 28 600 600 600S3 1306 L 400 500 1740 1400 500 1900 1200 1270 720 335 740 28 600 600 600S3 658 M 300 300 1700 1000 – 1200 700 880 525 280 730 28 450 450 555S3 806 M 300 300 1700 1000 – 1200 700 880 525 280 730 28 450 450 555S3 1006 M 300 300 1700 1000 – 1200 700 880 525 280 730 28 450 450 555S3 1306 M 300 300 1700 1000 – 1200 700 880 525 280 730 28 450 450 555S2 854 AM 250 200 1630 1000 – 860 460 700 285 210 440 28 450 450 486S2 1154 M 250 200 1800 1000 – 950 550 710 360 240 440 28 450 450 506S2 1604 M 250 200 1800 1000 – 950 550 710 360 240 440 28 450 450 506S2 1604 L 300 250 1800 1000 320 1300 750 730 410 227 440 28 450 450 603S2 658 H 300 250 1550 1000 – 1250 750 870 480 288 440 28 450 450 577S2 806 H 300 250 1550 1000 – 1250 750 870 480 288 440 28 450 450 577S2 1006 H 300 250 1550 1000 – 1250 750 870 480 288 440 28 450 450 577S2 1306 H 300 250 1550 1000 – 1250 750 870 480 288 440 28 450 450 577S1 854 H 250 200 1585 1000 – 1000 600 595 305 225 400 24 450 450 463S2 1154 H 250 200 1600 1000 – 1000 600 595 305 200 440 28 450 450 438S2 1604 H 250 200 1600 1000 – 1000 600 595 305 200 440 28 450 450 438S2 1154 S 250 200 1800 1000 – 1150 750 710 360 230 – 28 450 450 –S2 1604 S 250 200 1800 1000 – 1150 750 710 360 230 – 28 450 450 –
400 700 760 500 700 760500 700 760 550 700 760400 700 760
800 700 760800 700 760700 700 760700 700 760700 700 760500 700 760500 700 760500 700 760500 700 760400 700 760400 700 760400 700 760400 700 760500 700 760500 700 760500 700 760500 700 760400 700 760400 700 760400 700 760400 700 760400 700 760
Dimensions [mm]
Q R
Description
Auto-coupling.
Cast iron base plate incl. bend.
Auto-coupling.
Steel base plate excl. bend, incl. bolts and gaskets.
Cast iron bend 90° PN 10.
Guide rail bracket.
Upper holder in stainless steel for guide rails.
*200 mm higher than product number 96066479.
Pumpdischarge
[mm] DN 150 DN 200 DN 250 DN 300 DN 350 DN 400 DN 500 DN 600
ProductnumberBase plate discharge flange
DN
100/150 96060931
150/150 96060934
150/200 96060935
200/200 96060938
200/300 96060940
250/250 96060942
250/300 96060943
250/350 96060944
300/300 96060946
300/400 96060947
400/500 96060950
500/500 96060951
600/600 96060952
150 96457261
200 96067996
250 96067999
300 96067999
500 96068001
600 96459313
150 • 96066467
200 • 96066482
250 • 96066493
300 • 96066479
300* • 96066478
500 • 96465432
600 • 96066503
DN 100 96060973
DN 150 96060976
DN 200 96060977
DN 250 96004421
DN 300 96004422
96468285
96468290
96468295
96468300
150 • 96066466
200 • 96066481
Non-return valve.
Cast iron ball-type, PN 10.
Lifting chain.
Galvanized lifting chain with lifting linkand safety hook, length 6 m.
Max. load 1100 kg
Max. load 2000 kg
Max. load 3200 kg
Max. load 8000 kg
Seal condition monitoring.The OCT monitoring probe is inserted in the oil chamber. It ensures that any seal leakage is registered immediately.
96476770
96476771
96476772
OCT3460010
OCT3460020
OCT3460030
Level switch with 10 m cable.
Level switch with 20 m cable.
Level switch with 10 m cable, Ex version.
Level switch with 20 m cable, Ex version.
Bracket for level switch.
96003332
96003695
96003421
96003536
96003338
Automatic motor insulation resistance check.
The SARI 2 monitors the motor insulation resistance as well as the water content in the oil chamber between the two mechanical shaft seals. In case of deterioration of the motor insulation, the SARI 2 will provide an early warning, allowing for the necessary preventive maintenance before any motor damage occurs.
Alarm status monitoring.
The ASM 3 alarm status module is designed for monitoring motor temperature and possible moisture leaks in submersible pump motors. The ASM 3 decodes the internal protection circuit P1-P2 of the pump in such a way that the thermal alarm and moisture alarm, normally connected in series, can be separated. The ASM 3 registers the status of the internal protection circuit of the pump.
Types
ASM 3 110 V 96060434
ASM 3 230 V 96069934
SARI 2 96061602
All ranges
All ranges
All ranges
All ranges
Accessories > 22
Accessories
The range >23
The Grundfos wastewater range
Sewage grinder pumpsBrochure covers the new Grundfos
range of sewage grinder (SEG)pumps for pumping of wastewater
with toilet discharge.
Heavy-duty submersiblesewage pumps
Brochure covers the Grundfos rangeof submersible channel impeller
pumps from 1.65 kW up to 21 kWand SuperVortex pumps up to
29 kW. All designed for handlingunscreened raw sewage.
Super-heavy-duty submersiblesewage and raw water pumpsBrochure covers the Grundfos rangeof super-heavy-duty channel-impellerpumps, axial-flow pumps, and propel-ler pumps from 7.5 kW up to 520 kW.
Stainless steel heavy-dutysubmersible pumpsBrochure covers the Grundfos rangeof heavy-duty stainless steel pumps(SEN) for aggressive and corrosiveenvironments.
Portable dewatering pumpsBrochure covers the Grundfos rangeof portable dewatering pumps (DW)from 0.8 kW to 20 kW for pumpingof raw water with abrasives.
Mixers and flowmakersBrochure covers the new range
of mixers and flowmakers foroptimal control of liquids and solids throughout the waste-
water treatment process.
ControlsBrochure covers the Grundfos range of controls for the waste-water pumping systems.
The KP/AP stainless steel pumps
Brochure covers a wide range of high-quality stainless steel pumps for a
variety of domestic and commercialapplications.
Lifting stationsBrochure covers Grundfos lifting stations for individual as well as
multi-user applications.
Being responsible is our foundationThinking ahead makes it possible
Innovation is the essence
www.grundfos.com
Business with an attitude
Knowledge The sharing of knowledge, experience
and expertise across our global network will always
lead our business forward.
Innovation Combining the best technology with
fresh ways of thinking, we will continue to develop
even better pumps, systems, services and standards.
Solution With a complete product range, capable
of providing every conceivable water solution, we are
the most complete player on the market.
96
49
55
25 1
2 0
2V
ENTU
RE
MA
RK
ETIN
G A
S
