Upload
dangkhanh
View
222
Download
0
Embed Size (px)
Citation preview
ROUST-A-BOUTMakes one man a crew! Lifts 1,500 lbs. (680 kg)
and moves vertically and horizontally.Available in 15’ (4.6m) 18’ (5.5m), and 25’
(7.5m) heights.
SERIES 2300 - DRYWALL/HVAC LIFTVersatile jobsite lift! Tilts to 65° for drywall
installation or it can be used with theHVAC/light cradle to install duct or lighting.
Lifts 150 lbs. (70 kg) up to 11.5’ (3.5m) or 15’(4.5m).
SERIES 2200 - LIL’ HOISTERIdeal for many lifitng tasks. Lightweight and
easily transportable. 300 lb (135 kg)capacity. Available in 8’ (2.4m), and 10’
(3.1m) heights.
SERIES 2100 - CONTRACTOR LIFTMost popular lift. Lightweight and less
expensive. 650 lb (300 kg)capacity. Availablein 12’ (4.0m) 18’ (5.5m), and 24’ (7.3m)
heights.
SERIES 2000 - MATERIAL LIFTBuilt for heavy material. Short mast sections
make it easy to maneuver, transport andstore. Available in 10’ (3.2m), 15’ (4.6m), 20’
(6.1m), and 25’ (7.5m).
HI BOY JACKA tall jack for tight pipe installation. This
portable folding stand holds 1,000 lbs (450kg)and has heights ranging from 39” (99cm) to
72” (183cm).
BIG V JACKA heavy duty jack stand with a wider base
to support larger pipes. 12” (31cm) veehead supports up to 40” (102cm) diameterpipe and has a 2,500 lb (1135 kg) capacity.
MAX JAXThe ideal fabricator stand. 12” (31cm) veehead supports up to 40” (102cm) diameterpipe and has a 2,500 lb (1135 kg) capacity.Optional heavy duty casters and hold down
device available.
FAT JACKLarge vee head and wide base. 2,000 lb(900 kg) capacity. Folding legs. Available
with vee head or roller head only.
PRO JACKPriced for all budgets. 2,000 lb (900 kg)
capacity. Available with five head options:Standard Vee, Ball Transfer, Steel Wheel,
Rubber Wheel, Bar Stock.
FOLD-A-JACKFolds up for ease of storage and transport. 2,500 lb (1,135 kg) capacity. Available with
five head options: Standard Vee, Ball Transfer,Steel Wheel, Rubber Wheel, Bar Stock.
10 PACK MAC10 spindle wire cart. Spindles fold and
lock for storage. Removable mast swivels360° and can be locked in place. Built-in
wire guides.
6 PACK MAC6 spindle wire cart. Spindles fold and lock
for storage. Built-in wire guides.
CADDY MACFour models for convenient wire spool
dispensing and storage. Spindles swing out foreasy loading and then lock into place.
Spindles can be removed to accommodatelarger spools.
MAC RACK8 bins for storage and a 1,000 lb (450kg)load capacity. Arms fold up with plunger
pins and racks can be stacked forconvenient storage. Shipped with 6”
heavy duty casters attached.
PRO ROLLAdjustable height from 29” (74cm) to 43”
(109cm). 2,000 lb capacity (900 kg).Available with five head options: CarbonSteel, Stainless Steel, Rubber Wheel, Ball
Transfer, Bar Stock.
ADJUST-A-ROLLFour legs provide maximum support. 2,000
lb (900 kg) capacity. Available with fivehead options: Carbon Steel, Stainless Steel,
Rubber Wheel, Ball Transfer, Bar Stock.
REEL MACAll steel reel jacks that are available in 3sizes. Numbers 60 and 70 feature screw-
type telescoping adjustment and theNumber 80 features ratchet adjustment.
CYLINDER CARTFull range of heavy duty cylinder carts for
the piping trades.
CRICKETCan transport 20’ (6.1m) pipes up to 1,000
lb (450kg). Ratchet hold-down strap tosecure pipe. It is lightweight (70lb/32kg)and handle can be quickly removed for
storage.
HANDI BENCHTwo models: wood top or weld top, eachavailable in either 300 lb (135kg) or 600
lb (270kg) capacity. Folds for easystorage and portability. 24” x 40”
(60x100cm) work surface.
SPOOL MACA reel transporter with 350 lb (160kg)lifting capacity. Easy cable dispensing.
GRASSHOPPEREnables one man to lift 2,000 lb
(900kg) unassisted. Carries up to 20”(51cm) diameter pipe. Sliding chainblock design accommodates long and
short loads.
ECONO MACComes in 2 models that range from 15.5”
(39.4cm) - 52.75” (134cm). Each has a2,500 lb (1,135 kg) capacity. Double
pronged pin, easy disassembly and greatprice.
SERIES 2400 - CONTRACTOR LIFTSuper compact lift! Extremely portable for
one man operation. 400 lb (180 kg),12’ (3.6 m) lifting capacity.
FABMATEThe hoist for all fab shop needs! Capable of
lifting 20’ lengths of 10” diameter pipe.1,000 lb (450kg), 7’ (2.1m) lifting capacity.
HEAVY DUTY JACKBuilt for heavy use and abuse. 2,500 lb (1,135 kg)
capacity. Replaceable legs for easy repair.Available with five head options: Standard Vee,Ball Transfer, Steel Wheel, Rubber Wheel, Bar
Stock.
TABLE MODEL ROLLMount the 2,000 lb (900 kg) capacitytable roll on bench or floor. Availablewith five head options: Carbon Steel,Stainless Steel, Rubber Wheel, Ball
Transfer, Bar Stock.
ULTRA CLAMPGreat for clamping pipe to pipe, fitting,flange or tee. Available in 2.5”(65mm),
6”(150mm), or 12”(300mm)
ULTRA FITFit up two 90° fittings or 90° to tee.
Available in 2.5”(65mm), 6”(150mm), or12”(300mm)
INTERNAL FIT-UP CLAMPAlign flange to pipe even when
internal dimensions differ. Availablein 2”-4” (80-220mm) or 3”-8”
(50-145mm).
CLAMP CHAMPFor a wide range of fit ups. Available in 10”
(254mm), 16”(406mm), or 36”(914mm)
FIT KITA perfect pipe weld fit-up kit for the
professional pipe fitter.
ADJUST-A-FITMakes lining up fittings a one man
operation. Handles loads up to 1,000 lb(450kg)
ADJUST-A-FLANGEUse with Adjust-A-Fit to bring pipe
flanges to exact plumb. Handles loads upto 1,000 lb (450kg)
POSIFIXFits between studs for
perfect alignment. Available inPolystyrene (yellow) or ABS (orange)
STAKFIXFor use inside of the chase. Three
mounting surfaces. Available in Polystyrene (yellow) or
ABS (orange)
PIPEFIXUseful for applications in tight areas.Available in Polystyrene (yellow) or
ABS (orange)
CHANNELComes in 7’ lengths. Can be used as
an extension with Stakfix. Available inPolystyrene (yellow) or ABS (orange)
Contact us at www.sumner.com
Sumner Manufacturing Company, Inc.7514 Alabonson RoadHouston, TX 77088
phone: 281-999-6900fax: 281-999-6966
Sumner UKUnit A6
Haybrook Industrial EstateHalesfield 9
Telford, Shropshire TF7 4QWphone: (44) 01952. 586517fax: (44) 01952. 588920
Sumner Canada
470 Collier MacMillan Dr.Unit 2 & 3
Cambridge, ON N1R 5Y7 phone: 519-623-2300fax: 519-623-0744
The Leader in Material &Pipe Handling Equipment
N L VThe Nice Little Vise has 1/8 - 2-1/2”
(3 - 60mm) pipe capacity and a convenientcarrying handle.
FLANGE PINSHardened steel pins for accurate align-
ment of pipe flanges (carbon or stainlesssteel).
MUL-T-SQUAREFor measuring 45° and 90° angles. Two 45°
blades precise alignment.
HOLD DOWN DEVICETensile strength chain grips material in any
vee-head jack. Holds pipe up to 12”diameter.
ROTARY GROUND CLAMPProvides quick, positive ground for roll-outwelding. Puts and end to tangled ground
leads.
FIT STIXAligns steel plate quickly and easily. 3 modelsaccurately align for maximum ranges of 1/8”
(3mm) to 1/2” (12mm)
FLANGE SPREADERFor use on 150 lb (68kg) to 1,500 lb (680kg)flanges. For flanges sizes from 1” (25mm) to
24” (600mm)
MAGNETIC FIXTURESFor fast, accurate positioning offlat and round ferrous metal for
welding & assembly