Heavy Duty Commercial Photo Eye

VITECTOR®

NEMA 4/4X OPTOEYE

The VITECTOR® NEMA 4/4X OPTOEYE is a set of infrared transmitter and receiver sensors constructed of durable materials to withstand the toughest environments including commercial and industrial applications.

• NEMA 4/4X rating - this durable photo eye is highly resistant to environmental influences including water, dirt and dust; delivering performance beyond the standard photo eye offering

• UL325 2010 compliant – This photo eye satisfies the requirement of a monitored external entrampent device and is listed to be used with our X-series operators*

• Durable materials - allows high resistance to environmental influences in commercial and industrial settings

• Visible LEDs – separate visible LEDs to indicate both power and alignment with self-adjusting light intensity for all conditions

• Flexible design - resistant to mechanical impacts. Made from flexible thermoplastic elastomer molding, the OPTOEYE can withstand mechanical influences, such as physical shocks

• Adjustable design – allows height adjustment with supplied wing nut

©2011 Overhead Door Corporation. Overhead Door and the Ribbon logo are registered trademarks of Overhead Door Corporation. VITECTOR is a registered trademark of FRABA AG. All other trademarks are the property of their rightful owners. Consistent with our policy of continuing product improvements, we reserve the right to change product specification without notice or obligations. C900-917

Protection class NEMA 4/4X

Operation temperature -10 °F to +170 °F

Material of the housing Thermoplastic Elastomer (TPE)

Range / Working Distance Up to 35 ft

TECHNICAL DATA

Overhead Door Corporation2501 S. State Hwy 121 Bus., Ste. 200Lewisville, TX 75067469-549-7100 • www.OverheadDoor.com

*Model # 0SE-S 5010 was tested and approved by UL to meet the 2010 UL 325 requirement.

C900-917 FrabaSTB SalesSht-020311.pdf 1 4/19/11 11:04 AM

5M 4/11 JAR