heat transfer solutions

heat transfer solutionsPackard stocks an extensive aftermarket selection of popular Hydronic & Refrigeration Heat Exchangers!

Preferred KELVION Distributorpackardonline.com | 800.334.17692 Visit our website for full category offering!

Kelvion, Inc. is a leading manufacturer of plate heat exchangersfor the refrigeration, hydronic and industrial markets.

Item ID Nominal Tons Ref in (IDS) Ref out (IDS) Fluid (IDS) Depth (in.) Weight (lbs.)5” x 12” Models (4.9”W x 13.2”H)GBS400H-8 (OA1,H2) B 1/2 5/8 5/8 7/8 1.1 6

GBS400H-12 (OA1,H2) B 1 5/8 5/8 7/8 1.4 8

GBS400H-20 (OA1,H2) B 2 5/8 5/8 7/8 2.1 10

GBS400H-24 (OA1,H2) B 2 1/2 5/8 5/8 7/8 2.5 11

GBS400H-30 (OA1,H2) B 3 5/8 5/8 7/8 3 13

GBS400H-AE-44 (H1,OA1,IA2) B 4 5/8 7/8 1 1/8 4.3 17

GBS400H-AE-54 (H1,OA1,IA2) B 5 5/8 7/8 1 1/8 5.1 205” x 20” Models (4.9”W x 20.9”H)GBS500H-8 (OA1,H2) B 1 1/2 5/8 5/8 7/8 1.1 8

GBS500H-14 (OA1,H2) B 3 5/8 5/8 7/8 1.6 11

GBS500H-AE-20 (H1,OA1,IA2) B 4 5/8 7/8 1 1/8 2.1 14

GBS500H-AE-24 (H1,OA1,IA2) B 5 5/8 7/8 1 1/8 2.5 16

GBS500H-AE-40 (IA1,H1,IA2) B 7 1/2 7/8 1 1/8 1 1/8 3.9 24

GBS500H-AE-50 (K1,H1,K2) B 10 7/8 1 3/8 1 3/8 4.8 29

GBS500H-AE-70 (K1,H1,K2) B 15 7/8 1 3/8 1 3/8 6.5 3910” x 20” Models (10.7”W x 20.9”H)GBS700M-AE-24 (K1,H1,LZA2) B 10 7/8 1 3/8 1 5/8 2.6 50

GBS700M-AE-30 (K1,H1,LZA2) B 12 7/8 1 3/8 1 5/8 3.1 57

GBS700M-AE-40 (K1,H1,LZA2) B 15 7/8 1 3/8 1 5/8 4 69

GBS700M-AE-50 (LZA1,H1,LZA2) B 20 7/8 1 5/8 1 5/8 4.9 81

GBS700M-AE-60 (LZA1,IA1,LAA2) B 25 1 1/8 1 5/8 2 1/8 5.8 93

GBS700M-AE-70 (LAA1,IA1,LAA2) B 30 1 1/8 2 1/8 2 1/8 6.6 105

GBS700M-AE-90 (LAA1,IA1,ZD2) B 35 1 1/8 2 1/8 2 5/8 8.4 129

GBS700M-AE-100 (LAA1,IA1,ZD2) B 40 1 1/8 2 1/8 2 5/8 9.3 141

GBS700M-AE-190 (ZD1,IA1.ZD2) B 80 1 1/8 2 5/8 2 5/8 17.3 248

Liquid Chillers/EvaporatorsStandard Connections

Brazed Plate Heat Exchangers for Refrigeration & Cooling Solutions

Description Direct Replacement ForFlat Plate/ GEA Series Capacity (Single Heat Exchanger) (1)

Chillers CH 1/2 through 80 Tons Condensers C 1/2 through 80 Tons Subcoolers SC 1 through 120 Tons

• High volume models in stock at Packard, plus additional models available by special order

• Designed for 1/2 to 80 tons applications for refrigerants other than R410A and ammonia

(1) More than one heat exchanger can be installed in series or parallel for larger capacity

Maximum allowable working pressure: 450 psig (31Bar)

heat transfer solutions - PLATE heat exchangers

ADDITIONAL PLATE COUNTS AVAILABLE

packardonline.com | 800.334.1769 3Preferred KELVION DistributorVisit our website for full category offering!

800-334-1769678-981-8741

“Call me direct.”

Item ID Nominal Tons Ref in (IDS) Ref out (IDS) Fluid (IDS) Depth (in.) Weight (lbs.)5” x 12” Models (4.9”W x 13.2”H)GBH-UL400H-8 (OA1,H2) B 1/2 5/8 5/8 7/8 1.1 6

GBH-UL400H-12 (OA1,H2) B 1 5/8 5/8 7/8 1.4 8

GBH-UL400H-20 (OA1,H2) B 2 5/8 5/8 7/8 2.1 10

GBH-UL400H-24 (OA1,H2) B 2 1/2 5/8 5/8 7/8 2.5 11

GBH-UL400H-30 (OA1,H2) B 3 5/8 5/8 7/8 3 13

GBH-UL400H-AE-44 (H1,OA1,IA2) B 4 5/8 7/8 1 1/8 4.3 17

GBH-UL400H-AE-54 (H1,OA1,IA2) B 5 5/8 7/8 1 1/8 5.1 205” x 20” Models (4.9”W x 20.9”H)GBH-UL500H-8 (OA1,H2) B 1 1/2 5/8 5/8 7/8 1.1 8

GBH-UL500H-14 (OA1,H2) B 3 5/8 5/8 7/8 1.6 11

GBH-UL500H-AE-20 (H1,OA1,IA2) B 4 5/8 7/8 1 1/8 2.1 14

GBH-UL500H-AE-24 (H1,OA1,IA2) B 5 5/8 7/8 1 1/8 2.5 16

GBH-UL500H-AE-40 (IA1,H1,IA2) B 7 1/2 7/8 1 1/8 1 1/8 3.9 24

GBH-UL500H-AE-60 (K1,H1,K2) B 12 7/8 1 3/8 1 3/8 5.7 34

GBH-UL500H-AE-70 (K1,H1,K2) B 15 7/8 1 3/8 1 3/8 6.5 3910” x 20” Models (9.8”W x 20.3”H)CH10-XP 10 7/8 1 3/8 1 5/8 2.6 81

CH15-XP 15 7/8 1 3/8 1 5/8 4.1 97

CH20-XP 20 7/8 1 5/8 1 5/8 5 107

CH25-XP 25 1 1/8 1 5/8 2 1/8 5.9 117

CH30-XP 30 1 1/8 2 1/8 2 1/8 6.8 128

High Pressure Liquid Chillers/Evaporators

Standard Connections

EVAPORATOR/SUBCOOLER SIZING REQUESTSCOLD SIDE (Evaporating) HOT SIDE (Liquid)

* Refrigerant __________ * Fluid Type _________

* Target Evap. Temp _______F° * Concentration %/Glycol Type _____

* Superheat _______F° * Entering Fluid Temp ______F°

* Liquid Temp Entering TXV _____F° * Leaving Fluid Temp ______F°

* BTU _____________ * GPM/Mass Flow Rate __________

* # of Refrigerant Circuits ________ * Max Pressure Drop ______ psi

* Application _________________________________________________ * Max Design Pressure ____ <450 psi ____ <650 psi ____ Other______ No TXV? Check here if flooded evaporator _________

• Designed for R-410A applications, 1/2 to 80 tons - can be used with other refrigerants as well (except ammonia)


heat transfer solutions - PLATE heat exchangers

Dedicated Kelvion SpecialistSusan Tomlinson



Item ID Nominal Tons Ref in (IDS) Ref out (IDS) Fluid (MPT) Depth (in.) Weight (lbs.)2 Circuit 10” x 20” Models (9.8”W x 20.3”H) - Low PressureCH10-2C 10 7/8 1 1/8 1 1/2” 2.7 65

CH15-2C 15 7/8 1 1/8 1 1/2” 3.8 77

CH30-2C 30 7/8 1 1/8 1 1/2” 7 115

CH35-2C 34 7/8 1 1/8 1 1/2” 8.5 131

CH50-2C 50 1 1/8 1 1/2 2 1/2” 12.1 173

CH60-2C 60 1 1/8 2 1/8 2 1/2” 13.9 194

Item ID Nominal Tons Ref in (IDS) Ref out (IDS) Fluid (MPT) Depth (in.) Weight (lbs.)2 Circuit 10” x 20” Models (9.8”W x 20.3”H) - High Pressure XPCH10-2C-XP 10 7/8 1 1/8 1-1/2” 2.8 91

CH15-2C-XP 15 7/8 1 1/8 1-1/2” 3.9 104

CH20-2C-XP 20 7/8 1 3/8 1-1/2” 5 116

CH25-2C-XP 25 7/8 1 3/8 2” 6.1 128

CH30-2C-XP 30 7/8 1 3/8 2” 7.1 140

CH35-2C-XP 35 7/8 1 3/8 2” 8.4 155

CH40-2C-XP 40 7/8 1 5/8 2-1/2” 9.7 169

CH50-2C-XP 50 1 1/8 1 5/8 2-1/2” 12.2 197

CH60-2C-XP 60 1 1/8 2 1/8 2-1/2” 14 218

Two Refrigerant Liquid ChillersStandard Connections

COOLING SOLUTIONS

Item ID Nominal Tons Ref. In Ref. Out Fluid (IDS) Depth (in.) Weight (lbs.)5” x 12” Models (4.9”W x 13.2”H)GBS400H-AE-12 (H1,OA1,IA2) B 2 5/8 7/8 1 1/8 1.4 8

GBS400H-AE-22 (IA1,H1,IA2) B 5 7/8 1 1/8 1 1/8 2.3 11

GBS400H-AE-30 (IA1,H1,IA2) B 7 1/2 7/8 1 1/8 1 1/8 3 13

GBS400H-AE-36 (K1,H1,K2) B 8 7/8 1 3/8 1 3/8 3.5 15

GBS400H-AE-40 (K1,H1,K2) B 10 7/8 1 3/8 1 3/8 3.9 16

GBS400H-AE-50 (K1,H1,K2) B 12 7/8 1 3/8 1 3/8 4.8 18

GBS400H-AE-60 (K1,H1,K2) B 14 7/8 1 3/8 1 3/8 5.7 2110” x 20” Models (10.7”W x 20.9”H)GBS700M-AE-20 (LZA1,IA1,LAA2) B 16 1 1/8 1 5/8 2 1/8 2.3 45

GBS700M-AE-30 (LZA1,IA1,LAA2) B 22 1 1/8 1 5/8 2 1/8 3.3 57

GBS700M-AE-40 (LAA1,IA1,ZD2) B 28 1 1/8 2 1/8 2 5/8 4.2 69

SubcoolersStandard Connections

• 2C (Two Circuit) Chiller for 3 to 80 tons

Maximum allowable working pressure: 650 psig (45Bar) • Designed for R410A 3 to 80 tons applications

• Designed for refrigerants other than R410A and ammonia



Maximum Allowable working Pressure: 450 psig


Item ID Nominal Tons Ref out (IDS) Ref in (IDS) Fluid (IDS) Depth (in.) Weight (lbs.)5” x 12” Models (4.9”W x 13.2”H)GBS400H-8 (OA1,H2) B 1/2 5/8 5/8 7/8 1.1 6

GBS400H-10 (OA1,H2) B 3/4 5/8 5/8 7/8 1.3 7

GBS400H-12 (OA1,H2) B 1 5/8 5/8 7/8 1.4 8

GBS400H-20 (OA1,H2) B 2 5/8 5/8 7/8 2.1 10

GBS400H-24 (OA1,H2) B 2 1/2 5/8 5/8 7/8 2.5 11

GBS400H-30 (OA1,H2) B 3 5/8 5/8 7/8 3 13

GBS400H-36 (OA1,H2) B 3 1/2 5/8 5/8 7/8 3.5 15

GBS400H-44 (H1,OA1,IA2) B 4 5/8 7/8 1 1/8 4.2 17

GBS400H-54 (H1,OA1,IA2) B 5 5/8 7/8 1 1/8 5.1 205” x 20” Models (4.9”W x 20.9”H)GBS500H-12 (OA1,H2) B 2 5/8 5/8 7/8 1.4 10

GBS500H-14 (OA1,H2) B 3 5/8 5/8 7/8 1.6 11

GBS500H-18 (H1,OA1,IA2) B 4 5/8 7/8 1 1/8 2 13

GBS500H-22 (H1,OA1,IA2) B 5 5/8 7/8 1 1/8 2.3 15

GBS500H-24 (H1,OA1,IA2) B 6 5/8 7/8 1 1/8 2.5 16

GBS500H-30 (IA1,H1,IA2) B 7 1/2 7/8 1 1/8 1 1/8 3 19

GBS500H-40 (IA1,H1,IA2) B 10 7/8 1 1/8 1 1/8 3.9 24

GBS500H-50 (K1,H1,K2) B 12 7/8 1 3/8 1 3/8 4.8 29

GBS500H-60 (K1,H1,K2) B 15 7/8 1 3/8 1 3/8 5.7 3410” x 20” Models (10.7”W x 20.9”H)GBS700M-30 (K1,H1,LZA2) B 15 7/8 1 3/8 1 5/8 3.1 57

GBS700M-40 (LZA1,IA1,LZA2) B 20 1 1/8 1 5/8 1 5/8 4 69

GBS700M-50 (LZA1,IA1,LZA2) B 25 1 1/8 1 5/8 1 5/8 5 81

GBS700M-60 (LAA1,K1,ZD2) B 30 1 3/8 2 1/8 2 5/8 5.8 93

GBS700M-70 (LAA1,K1,ZD2) B 35 1 3/8 2 1/8 2 5/8 6.7 105

GBS700M-80 (LAA1,LZA1,ZD2) B 40 1 5/8 2 1/8 2 5/8 7.6 117

GBS700M-100 (LAA1,LZA1,ZD2) B 50 1 5/8 2 1/8 2 5/8 9.4 141

Liquid CondensersStandard Connections

COOLING SOLUTIONS


Quick delivery of popular itemsand countless special order options.

QUALITY PRODUCT SELECTION!

Kelvion is the superior choice for:• Water, Process and Glycol Chillers• Supermarket Systems

• Ice Making Machines• Environmental Chambers

• Hydraulic Oil Cooling• Beverage, Beer and Wine Cooling

• Designed for refrigerants other than R410A and ammonia


COOLING SOLUTIONS

Item ID Nominal Tons Ref out (IDS) Ref in (IDS) Fluid (IDS) Depth (in.) Weight (lbs.)5” x 12” Models (4.9”W x 13.2”H)GBH-UL400H-8 (OA1,H2) B 1/2 5/8 5/8 7/8 1.1 6

GBH-UL400H-12 (OA1,H2) B 1 5/8 5/8 7/8 1.4 8

GBH-UL400H-20 (OA1,H2) B 2 5/8 5/8 7/8 2.1 10

GBH-UL400H-24 (OA1,H2) B 2 1/2 5/8 5/8 7/8 2.5 11

GBH-UL400H-30 (OA1,H2) B 3 5/8 5/8 7/8 3 13

GBH-UL400H-44 (H1,OA1,IA2) B 4 5/8 7/8 1 1/8 4.3 17

GBH-UL400H-54 (H1,OA1,IA2) B 5 5/8 7/8 1 1/8 5.1 205” x 20” Models (4.9”W x 20.9”H)GBH-UL500H-8 (OA1,H2) B 1-1/2 5/8 5/8 7/8 1.3 9

GBH-UL500H-14 (OA1,H2) B 3 5/8 5/8 7/8 1.6 11

GBH-UL500H-18 (H1,OA1,IA2) B 4 5/8 7/8 1 1/8 2 13

GBH-UL500H-22 (H1,OA1,IA2) B 5 5/8 7/8 1 1/8 2.3 15

GBH-UL500H-30 (IA1,H1,IA2) B 7 1/2 1 1/8 7/8 1 1/8 3 19

GBH-UL500H-40 (IA1,H1,IA2) B 10 1 1/8 7/8 1 1/8 3.9 24

GBH-UL500H-60 (K1,H1,K2) B 15 1 3/8 7/8 1 3/8 5.7 34

High Pressure Liquid Condensers

Standard Connections

CONDENSER SIZING REQUESTSHOT SIDE (Condensing) COLD SIDE (Liquid)

* Refrigerant __________ * Fluid Type _________

* Target Condensing Temp _______F° * Concentration %/Glycol Type _____

* Gas Entering Temp _______F° * Entering Fluid Temp ______F°

* Subcooling Temp _____F° * Leaving Fluid Temp ______F°

* BTU _____________ * GPM/Mass Flow Rate __________

* # of Refrigerant Circuits ________ * Max Pressure Drop ______ psi

* Application _________________________________________________ * Max Design Pressure ____ <450 psi ____ <650 psi ____ Other______


• Designed for R-410A applications, 1/2 to 80 tons - can be used with other refrigerants as well (except ammonia)

Two Refrigerant Condensers • 2C (Two Circuit) Chiller for 3 to 80 tons

Contact Packard for 2 Refrigerant Condenserspart numbers and availability.



Item ID Fluid (MPT) (in.) Depth (in.) Weight (lbs.)3” x 8” Models (3.5”W x 9.1”H)GBS200H-8 (V1,V2) B 3/4 1.3 3.5GBS200H-10 (V1,V2) B 3/4 1.4 3.7GBS200H-14 (V1,V2) B 3/4 1.8 4.2GBS200H-20 (V1,V2) B 3/4 2.4 5GBS200H-30 (V1,V2) B 3/4 3.3 6.35” x 12” Models (4.9”W x 13.2”H)GBS400H-6 (V1,V2) B 3/4 0.9 5GBS400H-8 (V1,V2) B 3/4 1.1 6GBS400H-10 (V1,V2) B 3/4 1.3 7GBS400H-14 (V1,V2) B 3/4 1.6 8GBS400H-16 (V1,V2) B 3/4 1.8 9GBS400H-20 (W1,W2) B 1 2.1 10GBS400H-24 (W1,W2) B 1 2.5 11GBS400H-30 (FN1,FN2) B 1 1/4 3 13GBS400H-36 (FN1,FN2) B 1 1/4 3.6 15GBS400H-40 (FN1,FN2) B 1 1/4 3.9 16GBS400H-50 (FN1,FN2) B 1 1/4 4.8 18GBS400H-60 (FN1,FN2) B 1 1/4 5.7 21GBS400H-70 (FN1,FN2) B 1 1/4 6.6 24GBS400H-90 (FN1,FN2) B 1 1/4 8.3 30GBS400H-120 (FN1,FN2) B 1 1/4 11 39

Liquid Heat Exchangers GBS220H (3.54”W x 12.91”H | GBS240H (3.54”W x 18.27”H Also available

HYDRONIC SOLUTIONSHydronic Fluid-to-Fluid Plate Heat Exchangers

• Full thickness 316L copper brazed plates• Mounting studs included

• Ideal for residential and commercial applications such as radiant, snow melt

and domestic hot water

Model Series Description Capacity (Single Heat Exchanger)

GBS Series (2) Fluid-to-Fluid Up to 15” x 34” and 360 platesGBS-L Series (2) Liquid Low Pressure Drop 5” x 12” and 10” x 20” dimensionsGB-DW (Double Wall) Potable water, safety, oil cooling 5” x 12” and 5” x 20” up to 100 platesGBE (Economy)Series Water heating, hydraulics Up to 5” x 20” and 100 platesNT+ GF Series Gasketed Plate-and-Frame Large capacity industrial applications(2) Replaces FlatPlate and GEA FP/FG/FW Series brazed plates



HEAT TRANSFER

HYDRONIC SOLUTIONS

Item ID Fluid (MPT) (in.) Depth (in.) Weight (lbs.)5” x 20” Models (4.9”W x 20.9”H)GBS500H-8 (V1,V2) B 3/4 1.1 8GBS500H-10 (V1,V2) B 3/4 1.3 9GBS500H-14 (V1,V2) B 3/4 1.6 11GBS500H-20 (W1,W2) B 1 2.1 14GBS500H-24 (W1,W2) B 1 2.5 16GBS500H-30 (FN1,FN2) B 1 1/4 3 19GBS500H-36 (FN1,FN2) B 1 1/4 3.6 22GBS500H-40 (FN1,FN2) B 1 1/4 3.9 24GBS500H-60 (FN1,FN2) B 1 1/4 5.7 34GBS500H-70 (FN1,FN2) B 1 1/4 6.6 39GBS500H-90 (FN1,FN2) B 1 1/4 8.3 49GBS500H-120 (FN1,FN2) B 1 1/4 11 6410” x 20” Models (10.7”W x 20.9”H)*GBS700M-24 (TE1,TE2) B 1 1/2 2.6 50GBS700M-36 (TE1,TE2) B 1 1/2 3.6 64GBS700M-40 TE1,TE2) B 1 1/2 4.2 69GBS700M-50 (X1,X2) B 2 4.9 81GBS700M-60 (X1,X2) B 2 5.8 93GBS700M-70 (X1,X2) B 2 6.6 105GBS700M-80 (X1,X2) B 2 7.5 117GBS700M-110 (LGA1,LGA2) B 2 1/2 10.2 152

Liquid Heat Exchangers (table continued from pg.7)

HEAT TRANSFER

WarmerFluid

CoolerFluid

LIQUID-TO-LIQUID SIZING REQUESTSHOT SIDE COLD SIDE

* Fluid Type

* Concentration % d /Glycol Type ______ % ______ %

* Entering Fluid Temp ______ F° ______ F°

* Leaving Fluid Temp ______ F° ______ F°

* GPM/Mass Flow Rate

* Max Pressure Drop ______ psi ______ psi* BTU * Application _____________________________________ * Max Design Pressure ____ <450 psi ____ <650 psi ____ Other______



Features• An economical solution for decentralized hot water systems, separating systems and various regenerative applications• Compact brazed plate heat exchangers designed for hydronics• Applications with up to 190 psi /13 bar and max. 300°F/150°C• High thermal efficient plate heat exchangers• Handle everything with minimal size and weight for maximal efficiency, quality and profitability

Liquid Low Pressure Drop Heat Exchangers

Item ID Fluid (MPT) (in.) Depth (in.) Weight (lbs.)5” x 12” L Models (5.0”W x 11.1”H)GBS420L-08 (XVC1,XVC2) B UL 3/4 1.2 5

GBS420L-10 (XVD1,XVD2) B UL 1 1.4 6

GBS420L-14 (XVD1,XVD2) B UL 1 1.9 7

GBS420L-20 (XFN1,XFN2) B UL 1 1/4 2.5 9

GBS420L-30 (XFN1,XFN2) B UL 1 1/4 3.6 11

GBS420L-40 (XFN1,XFN2) B UL 1 1/4 4.7 13

GBS420L-50 (XFN1,XFN2) B UL 1 1/4 5.8 16

GBS420L-60 (XFN1,XFN2) B UL 1 1/4 6.9 1810” x 20” L Models (10.7”W x 20.9”H)GBS700L-20 (TE1,TE2) B 1 1/2 2.5 51GBS700L-24 (TE1,TE2) B 1 1/2 3 56GBS700L-30 (X1,X2) B 2 3.6 62GBS700L-40 (X1,X2) B 2 4.6 73GBS700L-50 (LGA1,LGA2) B 2 1/2 5.7 84GBS700L-60 (LGA1,LGA2) B 2 1/2 6.7 95GBS700L-70 (LGA1,LGA2) B 2 1/2 7.8 106

HYDRONIC SOLUTIONS

Item ID Fluid (MPT) (in.) Depth (in.) Weight (lbs.)3” x 9” Models (3.54”W x 9.09”H)GBE200H-14 (V3,V4) 3/4” 1.8 4.2

GBE200H-20 (V3,V4) 3/4” 2.4 5

GBE200H-30 (V3,V4) 3/4” 3.3 6.35” x 12” Models (4.88”W x 13.19”H)GBE400H-10 (W3,W4) 1” 1.3 7GBE400H-20 (W3,PA4) 1” MPT, 3/4” FPT 2.2 10GBE400H-20 (W3,W4) 1” 2.2 10GBE400H-30 (W3,W4) 1” 3 13GBE400H-40 (W3,W4) 1” 3.9 16GBE400H-50 (FN3,FN4) 1 1/4” 4.8 18

GBE Economy Models

Features• Copper Brazed - Stainless Steel Plates

*up to 190 psig & 300F (13Bar)



CORROSION RESISTANT

Item ID Fluid (MPT) (in.) Depth (in.) Weight (lbs.)5” x 13” Models (4.9”W x 13.2”H)GBH-DW400H-20 (W1,W2) B 1" 2.3 12

GBH-DW400H-30 (W1,W2) B 1" 3.3 15

GBH-DW400H-40 (FN,FN2) B 1-1/4" 4.3 19

GBH-DW400H-50 (FN1,FN2) B 1-1/4" 5.2 22

GBH-DW400H-60 (FN1,FN2) B 1-1/4" 6.2 26

GBH-DW400H-70 (FN1,FN2) B 1-1/4" 7.1 305” x 20” Models (4.9”W x 20.9”H)GBH-DW500H-60 (FN1,FN2) 1 1/4" 6 41

Double Wall, Liquid Heat Exchangers

Corrosion-Resistant Plate Heat ExchangersModel Series Description Capacity (Single Heat Exchanger)*

GNS Series (Nickel Brazed) De-Ionized water, laser cooling,swimming pools and spas

Up to 10” x 20” and 150 plates;-XCR upgrade to 254 SMO stainless plates

GVH Series(VacInox Brazed)

Potable water, laser cooling,district heating

Up to 10” x 20” and 150 plates;-XCR upgrade to 254 SMO stainless plates

GNS-AE and GVH-AE Series Ammonia evaporator & condenser;corrosive fluid applications Up to 10” x 20” and 150 plates

GF & NT Series Gasketed Plate-and-Frame Large capacity industrial applications

HYDRONIC SOLUTIONS

Features• Second wall not only separates the media from each other, but also makes the leak visible• Heat exchangers consist of double-walled, hermetically sealed plates• Two stainless steel plates instead of one• Double-walled for better protection• Reliability, efficiency and highest safety in one product

GBS-DW400H (100 plates max.) 4.9” x 13.2”GBS-DW500H (100 plates max.) 4.9” x 20.9”232 psig/16 bar models also available


| 800-334-1769678-981-8741“Call me direct.”

Dedicated in-house support team ready to assistwith technical questions and plate sizing.

Dedicated Kelvion SpecialistSusan Tomlinson


STEAM SIZING REQUESTSHOT SIDE (Steam) COLD SIDE (Liquid)

* Superheat _______F° * Fluid Type _________

* Steam Pressure _______ psi * Concentration %/Glycol Type _____

* Target Condensing Temp _______F° * Entering Fluid Temp ______F°

* Max Pressure Drop ______ psi * Leaving Fluid Temp ______F°

* GPM/Mass Flow Rate __________

* BTU _____________ * Max Pressure Drop ______ psi

* Application _________________________________________________ * Max Design Pressure ____ <450 psi ____ <650 psi ____ Other______

Item ID Fluid (MPT) (in.) Depth (in.) Weight (lbs.)5” x 12” H Models (4.9”W x 13.1”H)GNS400H-10 (V1,V2) B 3/4" 1.4 7

GNS400H-20 (W1,W2) B 1" 2.4 9

GNS400H-20-XCR (W1,W2) B 1" 2.4 9

GNS400H-24 (W1,W2) B 1" 2.8 10

GNS400H-30 (FN1,FN2) B 1-1/4" 3.3 12

GNS400H-40 (FN1,FN2) B 1-1/4" 4.1 145” x 20” H Models (4.9”W x 13.2”H)GNS500H-40 (FN1,FN2) B 1-1/4" 4.1 2610” x 20” L Models (10.7”W x 20.9”H)GNS700L-20 (TE1,TE2) B 1-1/2" 2.4 47

GNS Series

All Stainless Steel, Nickel-Chrome Brazed Liquid Heat Exchanger

Features• Second wall not only separates the media from each other, but also makes the leak visible• Heat exchangers consist of double-walled, hermetically sealed plates• Two stainless steel plates instead of one• Double-walled for better protection• Reliability, efficiency and highest safety in one product

CORROSION RESISTANT

GNS-AE Series excels when evaporator and condenser application fluids are too abrasive for copper.

Features• When resistance of cooper is not enough, nickel as brazing material is chosen• This series has all advantages of a brazed plate heat exchanger, but it is more stable against corrosive media such as

ammonia, deionized water, sulphides and sulphates• A wide range of applications up to 200°C/392°F and 16 bar/232 psi• Proven technical features like Safety Chamber, Delta Injection and Full Flow System available• 75% is made of pure nickel• - XCR 254 SMO stainless plate upgrade available



Mounting BracketsFeatures

• Holding a brazed plate heat exchanger in place while you pipe up sweat connections can be a difficult challenge. Most Kelvion brazed plate heat exchangers are equipped with mounting studs which allow the use of our proprietary mounting brackets. Making it much easier to complete those sweat connections.

• Bracket is made of AISI 304 stainless steel

Gasketed Plate Heat Exchangers- GF & NT Series

Features• Versatile use in all industries,

including refrigeration, heating and marine

• Wide selection of plate types and sizes, including titanium and

double wall

• Can be taken apart for cleaning and repair in harsh operating conditions

• Add or remove plates to adjust capacity

Item ID Fluid (MPT) (in.) Depth (in.) Weight (lbs.)5” x 12” Models (4.9”W x 13.2”H) GVH400H-08 (V1,V2) B 3/4" 1.2 6

GVH400H-10 (W1,W2) B 1" 1.4 7

GVH400H-14 (W1,W2) B 1" 1.7 8

GVH400H-20 (FN1,FN2) B 1-1/4" 2.3 10

GVH400H-24 (FN1,FN2) B 1-1/4" 2.7 11

GVH400H-30 (FN1,FN2) B 1-1/4" 3.2 12

GVH400H-50 (FN1,FN2) B 1-1/4" 5 185” x 20” H Models (4.9”W x 13.2”H)GVH500H-40 (FN1,FN2) B 1-1/4" 4.1 2610” x 20” L Models (10.7”W x 20.9”H)GVH700L-30 (X1,X2) B 2" 3.3 59

VacInox Brazed Liquid Heat ExchangerFeatures

• Vaclnox Stainless Steel Heat Transfer Plates ‐ VacInox is a new, unique and revolutionary technology for a solid/resistant connection of stainless steel plates ‐ VacInox is the solution for applications with aggressive media and high pressures

• - XCR 254SMO stainless plate upgrade available ‐ GVH-AE Series excels when evaporator and condenser application fluids are too abrasive for copper

CORROSION RESISTANT

ACCESSORIES

Built to order - contact Packard for part numbers and plate selection.



Brazed Plate Nomenclature

Plates are 316L SS unless otherwise stated

Fittings are 304L SS unless otherwise stated

Additional fitting types and sizes (weld, flange, rotolock, and more) available upon request – additional charges and lead time may apply

Plate SizeSIZE CODE DIMENSIONSG__100 2.91” X 8.03”

G__200 3.54” X 9.09”

G__220 3.54” X 12.91”

G__240 3.54” X 18.27”

G__400 4.88” X 13.19”

G__418* 3.31” X 11.10”

G__420 5.00” X 11.10”

G__500 4.88” X 20.94”

G__525* 4.65” X 20.67”

G__550 4.88” X 20.94”

G__700 10.67” X 20.94”

G__757* 11.06” X 21.38”

G__760 10.1” X 20.4”

G__800 10.7” X 20.9”

G__900 10.7” X 31.6”

G__910* 12.52” X 30.83”

G__1000 15.2” X 34.5”

*Non-US or discontinued - convert to current US series

Fitting Type/Size

TYPE CODE SIZEMPT FN 1-1/4"

SWEAT H 7/8"

SWEAT IA 1-1/8"

SWEAT K 1-3/8"

SWEAT LAA 2-1/8"

MPT LGA 2-1/2"

SWEAT LZA 1-5/8"

SWEAT M 1/2"

SWEAT N 3/4"

SWEAT NO/NOA 3/8"

SWEAT O/OA 5/8"

FPT OZA 1/2"

FPT PA 3/4"

FPT RA 1"

FPT RBA 1-1/4"

MPT TE 1-1/2"

MPT TEB 2"

MNPT TL 2"

MPT U 1/2"

MPT V 3/4"

MPT W 1"

MPT X 2"

MPT XFN 1-1/4"

MPT XG 2"

MPT XGA 2-1/2"

MPT XGZ 1-1/2"

MPT XVC 3/4"

MPT XVD 1"

SWEAT ZD 2-5/8"

Series

COPPER BRAZED

GBE 190 psig Economy

GBH-DW 650 psig Double Wall

GBH-UL 650 psig Standard

GBH-DW 650 psig Double Wall

GBS 450 psig Standard

GBS-DW 232 psig Double Wall

GWH 798 psig

(2)(2) SPECIAL FEATURES

AE

Evaporator distributor on refrigerator inlet (chillers 4T and over; all Subcoolers)

DUO-##/## 2-Circuit Model – plate count per circuit

U 2-Pass Model

X One circuit on front / one circuit on back connections

Z

Each circuit has one connection on the front and one connection on the back

CertsOPTIONAL CERTIFICATIONS

ASME** (UM) American Society of Mechanical Engineers

CE European Economic Area

CRN** Canadian Registration Number

KIWAEurope, Asia, Latin, America

** additional charges apply

(3)

(3) ADDITIONAL FEATURES

XCR254SMO Stainless extra corrosion resistant plates

Series

BRAZED EXTRA CORRO-SION RESISTANT

GNSNickel, 232 psig(XCR option 160 psig)

GNH-HP Nickel, 667 psig

GVHVacInox alloy, 363 psig 400, 500, 800 size; 392 psig 700 size

(1)(1) PLATE TYPE/DESIGN

H High theta,higher pressure drop

M Medium theta, medium pressure drop

L Low theta,lower pressure drop

SpecialSPECIAL BUILD CODE

REFKelvion internal code only- ok to order

Other valuesBuilt to specific customer specification

LocationFITTING LOCATION

1 Circuit A, front of plate

2 Circuit B, front of plate

3 Circuit A, back of plate

4 Circuit B, back of plate

BoltsBOLT CODE

B Mounting stud bolts included

Blank Does NOT have mountingstud bolts

XB Insulation and Bolts

NOMENCLATURE

Features• Vaclnox Stainless Steel Heat Transfer Plates

‐ VacInox is a new, unique and revolutionary technology for a solid/resistant connection of stainless steel plates ‐ VacInox is the solution for applications with aggressive media and high pressures

• - XCR 254SMO stainless plate upgrade available ‐ GVH-AE Series excels when evaporator and condenser application fluids are too abrasive for copper

GBH - UL 500 H-AE-40- (IA1,H1,IA2) B (Series) (Fitting code/location)(Size) (Bolts) (Certs) (Special)(1) (2) (3)(#plates)


Brazed Plate Heat Exchangers Features:

Other Cooling & Hydronic Solution Products:

• Easy to install • Compact size means it fits easily into confined spaces, especially when replacing a much

larger shell and tube heat exchanger• High Performance

• High turbulence created by corrugations in the plates results in closer approach temperatures with much smaller units

• Fully brazed construction handles high operating pressures• Copper brazed 316L stainless heat transfer plates• Extra corrosion-resistant nickel and VacInox upgrades available• 254 SMO stainless upgraded plates available

• Proven and Reliable• UL listed and ASME Section VIII available• Every heat exchanger is tested before it leaves the plant

evaporator motors

compressors

pump motorsRefrigeration motors

controls

C: 100M: 0Y: 0K: 0

R: 0G: 174B: 239#00aeef

Gradient

LIGHT BLUE SPECSC: 100M: 72Y: 2K: 12

R: 100G: 78B: 149#004e95

PACKARD BLUE SPECSC: 0M: 0Y: 0K:100

R: 0G: 0B: 0#000000

BLACK SPECSFORCE FONT (Font Manipulated): Avenir Next, Bold Italic TITAN FONT: Arial, Regular

®

®

®

C: 100M: 0Y: 0K: 0

R: 0G: 174B: 239#00aeef

Gradient

LIGHT BLUE SPECSC: 100M: 72Y: 2K: 12

R: 100G: 78B: 149#004e95

PACKARD BLUE SPECSC: 0M: 0Y: 0K:100

R: 0G: 0B: 0#000000

BLACK SPECSFORCE FONT (Font Manipulated): Avenir Next, Bold Italic TITAN FONT: Arial, Regular

®

®

®


Kelvion Request Form ConfidentialFlatPlate Data Request Form

Application:

DATA REQUEST FORM

Confidential

800.334.1769

To obtain a quotation for your replacement product, give as much data as possible and e-mail/fax the

(Example: Evaporator, Condenser, Subcooler, ETC.)

completed questionnaire to Packard. Fax 770-427-5140, email [email protected].

Company Contact: Address Title:

Phone: City Fax: State, Zip Email:

Application Data (specify if ºC) Hot Side Cold Side

Preferred Plate Material (REQUIRED): 304 SS 316 SS Titanium Other:

Preferred Gasket Material: NBR Viton EPDM Other:

Certification: ASME CRN AHRI Other:

Product: GPHE

Comments:

Name of Fluid*Rate of Flow* (GPM)

(PSI)

(PSI)

(ºF)(ºF)

(ºF)(ºF)(ºF)

(ºF)(ºF/PSI)

Entering Fluid Temp*Leaving Fluid TempMaximum Permissible Pressure DropTarget Evaporator Temp/Design Pressure* Needed for evaporators & condensers

Needed for condensers

SuperheatLoad (Btu/H)*Maximum Working PressureTarget Condensing Temperature*Gas Entering TemperatureSubcoolingFluid Fouling Factor (h•ft2•ºF/Btu)

Need at least 5 data points. Items marked with * must be filled in. (If applicable to application)Include Glycol type and concentration percent if used.

(Gasketed):BPHE: (Brazed):

packardonline.com | 800.334.1769 Visit our website for full category offering!

Packard supplies to Wholesale Distribution only | ©2020 Packard, Inc.

PACKARDONLINE.COM |

Regional Sales Office

Distribution Center

Corporate Headquarters& Distribution Center2700 Barrett Lakes Blvd. NW,Suite 100, Kennesaw, GA 30144

Mid-West Distribution Center2570 N. Shadeland Ave., Suite 103Indianapolis, IN 46219

West Coast Distribution Center7350 South Kyrene Rd., Suite 104,tempe, AZ 85283

Local: 770-427-5765 | Toll Free: 800-334 -1769 | Fax: 770-427-5140 | email: [email protected]

customerpick up is

available at all of our distribution

centers

customerpick up is

available at all of our distribution

centers

Many suppliers require large quantity or priceminimums to order direct, with Packard just place oneP.O. using the Packard Bundle Advantage for great savings.

BUNDLEADVANTAGE

BUNDLEADVANTAGE

Documents

heat transfer solutions