HDPE pipe and fittings - The Hot Seller

HDPE pipe and fittings range from 20 - 1600mm

HDPE pipe --- DN1400 mm

HDPE pipe fittings --- Equal coupling, equal cross: DN1600 mm

As one of the most popular items, HDPE pipe and fittings, are always regarded as one of themajor products in Junxing pipe group. With our professional experiences in this scope andadvanced equipment, now we can produce HDPE pipes and fittings with wild range, up to1600mm( from 20 - 1600mm); also we can produce three types of pipe fittings as below: socketfusion fitting, butt fusion fitting and fabricated fitting. Fittings like: equal coupling, 45/90 elbow,tee and male/female threaded coupling, are also available for Junxing group now.At present, HDPE pipe and fittings can be used in fields as below:

>>> HDPE water pipe:• Water Supply System1. Transportation and distribution system2. House service connection3. Geo-thermal pipe for room heating & hot water system• Industrial1. For Effluents, chemicals and treated/untreated waster disposal2. As Hydro Transport System for handling and conveyance iron ore slurry, - coal / cement slurryand slurry transportation in mines3. For conveyance of edible oil, fruit pulps, juices, milks and other food materials.4. As ducts for ventilation and air conditioning• Environmental Protection1. Rehabilitation of existing sewer2. Effluent and waste treatment plant pipes3. Dust suppression piping systems in cement industry4. Sand slurry disposal pipes in dredging5. De-gassing pipes in water effluent marine outfalls• Agriculture1. Piping for submersible and jet pumps2. Suction and delivery pipes

3. Sprinkler piping for irrigation• Other1. Transportation of chemicals, solids, gas and oils2. Underwater pipelines. / Desalination plants3. Bore wall delivery lines4. Telecommunication cable ducting

>>> HDPE dredging pipeUsage: dredging.Size: 20mm to 1600mm.Pressure: 0.4MPa, 0.6MPa, 0.8MPa, 1.0MPa.1.25MPa, 1.6MPa, 2.0MPa.Standard: ISO4427, EN12201, AS4130 etc.Color: Black or customized.

>>> HDPE mining pipeUsage: Mining.Size: 20mm to 1600mm.Pressure: 0.4MPa, 0.6MPa, 0.8MPa, 1.0MPa.1.25MPa, 1.6MPa, 2.0MPa.Standard: ISO4427, EN12201, AS4130 etc.Color: Black or customized.

>>> HDPE gas pipeAdvantages:1. Corrosion Resistant: resist chemical matters and electron chemical corrosion2. Low Flow Resistance: smooth interior walls and low friction3. Excellent Flexibility: can be supplied in coil4. Easy Installation: light weight and handed friendly5. Longevity:can work for more than 50 years under proper use6. Various Joint Availability: butt fusion joint, electro fusion joint and transition joint7. Recycled and Environment-friendly

>>> HDPE geothermal pipeGeothermal pipe transfers heat from the ground into a building to provide space heating and topre-heat domestic hot water.Geothermal exchange is a clean energy method of heating and cooling commercial and residentialbuildings. The technology is proven and has been in use for decades. In simplest terms, PE pipe isburied in the ground, allowing energy transfer between the fluid in the pipe and the earth. Thefluid in the piping is warmed in the winter and cooled in the summer. The system consists ofburied PE pipe, a heat pump, and air distribution system.

Finally, all these are made by Junxing group, with warranty and certifications. If you have anyinterest, Kindly check web here: www.junxingpipe.com.Contact person: William XuEmail: william@junxingpipe.comWhatsapp/Viber: 86-15701674771.