Upload
kripaverma88
View
270
Download
11
Tags:
Embed Size (px)
Citation preview
A
Project report
On
PROCESS OF HOME LOAN FINANCING BY BANK
UNDERTAKEN IN
HDFC BANK LTD.
As partial fulfillment for the award of MBA degree under B.R. Ambedkar Agra
University Agra U.P.
( 2007 – 09)
Under the guidance of: Submitted By
Mr. Vivek Drivedi Km. Krishna Jaiswal
Roll No- 22
SETH PADAM CHAND JAIN INSTITUTE OF COMMERCE
BUSINESS MANAGEMENT & ECONOMICS, AGRA
1
CERTIFICATE
To whom it may concern
This is to certify that Km. Krishna Jaiswal, Roll No. 22 of MBA is a Bonafide regular
student of Seth Padam Chand Jain Institute of Commerce Business Management &
Economics, Agra for the session 2007-09.
She has completed the summer training project report entitled “PROCESS OF HOME
LOAN FINANCING BY BANK” in the organizations HDFC Bank Ltd. as a part
fulfillment for the award of MBA degree under B.R. Ambedkar Agra University Agra
U.P.
I find the research report is up to standard and original one.
Executive Director
2
CERTIFICATE
To whom it may concern
This is to certify that Km. Krishna Jaiswal, Roll No. 22 of MBA is a Bonafide regular
student of Seth Padam Chand Jain Institute of Commerce Business Management &
Economics, Agra for the session 2007-09.
She has completed the summer training project report entitled “PROCESS OF HOME
LOAN FINANCING BY BANK” in the organizations HDFC Bank Ltd. as a part
fulfillment for the award of MBA degree under B.R. Ambedkar Agra University Agra
U.P.
I find the research report is up to standard and original one.
Mr. Vivek Drivedi
Project Supervisor
3
DECLARATION
I hereby declare that I have carried out Summer Training Project on the topic
entitled “Process of Home Loan Financing by Bank” at Seth Padam Chand Jain
Institute of Commerce Business Management & Economics, Agra.
I further declare that this project work is based on my original work and no part of
this project has been published or submitted to anybody.
Krishna Jaiswal
4
CONTENTS
Acknowledgement
Executive Summary
Theoretical Concepts
Introduction/ Statement of Problem
Scope of the Study & Importance of the Study
Objective of the Study
Research Methodology
Introduction of the Organization
Data Presentation & Analysis
Findings of the Study
Recommendations
Bibliography
Appendix
5
ACKNOWLEDGEMENT
I, Krishna Jaiswal, MBA Student in SPCJ Institute of Commerce Business
Management & Economics, Agra is highly greatful to all those who guided me in
completing this project.
First of all, I would like to pay my heartiest thanks to especially Mr. Naveen
(Operation Manager) HDFC Bank Ltd., Gorakhpur who provided me such a
wonderful opportunity to do Summer Training and provided their valuable suggestions
in understanding the work of Research Project.
Last but not the least, I would like to thanks all faculties of SPCJ Institute of
Commerce Business Management & Economics, Agra, who gave me the useful tips
and suggestions regarding project. I would like to thanks my project supervisor, Mr.
Vivek Drivedi for imparting her valuable guidance to me.
Words can never express the deep sense of gratitude, I feel for our MBA
Coordinator, Mr. Neeraj Gupta, who has been a constant source of inspiration and
encouragement for me.
KRISHNA JAISWAL
MBA-3rd SEM.
6
EXECUTIVE SUMMARY
7
EXECUTIVE SUMMARY
Summer training is an integral part of MBA program it helps the student to understand
the practical aspect of financing. To understand the important aspect of financing, I
choose HDFC Bank Ltd. Gorakhpur For my training, which is hard core financing
company.
In the summer training my project topic was “Customer Profiling and Purchase
Parameters”. My project aim to know the factors which influences the purchase decision
of customer regarding their vehicles.
Maruti udyog limited (MUL) was established in feb.1981 through an act of the
parliament to meet the growing demands of personal modes of transport caused by the
lack of an efficient public transport system.
Suzuki motor company was chosen from seven prospective partners worldwide.
this was due not only to their undisputed leadership in small cars but also to their
commitment to actively bring to MUL contemporary technology and japans management
practices.
A license and and a joint venture agreement was signed between Govt.of India
and Suzuki motor company in October .1982
8
My objective in this two months summer training is to study the factors which
influences a customers to make their purchase decision regarding personal motor
vehicles.
The main objective of my survey is :-
to find out the general impression of customer towards maruti Suzuki and
analyze its problems and find out possible solutions to rectify their problems
The most effective media of promotion.
The marketing situation of MARUTI SUZUKI in Gorakhpur.
To know the Purchase Parameters of Customers.
Purpose
This report aims to understanding the changing dynamics of Automobiles Industry in
India. This report also aims aligning the MARUTI SUZUKI practices, with the best
available practices of industry.
Methods
Descriptive approach – Questionnaire
Exploratory approach – Informal Interview, Web search
For information about Indian dairy market – Search through Internet
For market dynamics in Gorakhpur market – Survey Methodology
Including questionnaire + Informal interview.
9
THEORETICAL CONCEPTS
10
THEORETICAL CONCEPTS
MARKETING MIX
Meaning and Definition
Marketing Mix means to collect and mix the resources of marketing in the manner that
objects of the enterprise may be achieved and maximum satisfaction may be provided to
the consumers. The term marketing mix is used to describe a combination of four
elements – the product, price, physical distribution and promotion. These are popularly
known as “Four P’s”. A brief description of the four elements of marketing mix (Four
P’s) is.
Product : The product itself is the first element. Products most satisfy
consumer needs. the management must, first decide the products to be
produced, by knowing the needs of the consumers.
Price : The second element to affect the volume of sales is the price. The
market or announced amount of money asked from a buyer is known as basic
value placed on a product.
Promotion : The product may be known to the consumers. Firms must
undertake promotion work-advertising, publicity, personal selling etc. which
are the major activities.
11
Place : Physical distribution is the delivery of products at the rights time and
at the right place. The distribution mix is the combination of decisions relating
to marketing channels, storage facility, inventory control, location
transportation warehousing etc.
12
Marketing Mix
Product
Product varietyQualityDesign FeaturesBrand NamePackagingSizesServices
Price
List priceDiscountsAllowancesPayment periodCredit cards
Promotion
Sales promotionAdvertisingSales forcePublic relationsDirect marketing
Place
Channels
Coverage AssortmentsLocationsInventoryTransport
Consumer Behaviors
What is Consumer Buying Behaviors?
Definition of Buying Behaviour,
Buying Behaviour is the decision processes and acts of people involved in buying and
using products.
Need to understand:
Why consumers make the purchases that they make?
What factors influence consumer purchases?
The changing factors in our society.
Consumer Buying Behaviour refers to the buying behaviour of the ultimate consumer. A
firm needs to analyze buying behaviour for:
Buyers' reactions to a firms marketing strategy has a great impact on the firm's
success.
The marketing concept stresses that a firm should create a marketing mix(MM)
that satisfies (gives utility to) customers, therefore need to analyze the what,
where, when and how consumers buy.
13
Marketers can better predict how consumers will respond to marketing strategies.
CONSUMER BEHAVIOR
Consumer behavior is the study of the behavior of consumers, when they go to purchase
something to satisfy their needs and wants.
Buying Motives
A motive can be defined as a drive or an urge for which an individual seeks satisfaction.
It becomes a buying motive when the individual seeks satisfaction through the purchase
of something.
Behavior is a goal activity.
Factors Influences Consumer Behavior
Consumer’s behavior is influenced by cultural, social, personal, and psychological
factors. Cultural factors exert the broadest and deepest influence.
Cultural Factors : Culture, subculture, and social class are important in buying
14
Motive / Need (Hungry)
Goods (Food)
Behavior
Goal (Preparing)
Goal achievement (Eating)
behavior.
1. Culture : Culture is the most fundamental determinant of a person’s wants and
behavior through his or her family and other key insinuations. A child
growing up in the United States is exposed to the following values :
achievement and success, activity, efficiency and practicality, progress,
material comfort, individualism, freedom, external comfort, humanitarianism
and youthfulness.
2. Subculture : Each culture consists of smaller that provide more specific
identification and socialization for their members. Subculture include
nationalities, religions, racial groups and geographic regions. Many
subcultures make up important market segments, and marketers often design
products and marketing programs tailored to their needs.
3. Social Class : Virtually all-human societies exhibit social stratification.
Stratification sometimes takes the form of a caste system where the members
of different castes are reared for certain roles and cannot change their caste
membership.
(II) Social factors : In addition to cultural factors, a consumers behavior is influenced
by such social factors as reference groups, family, and social roles and statuses.
1. Reference Groups : A person’s reference groups consist of all the groups that
have a direct (face-to-face) or indirect influence on the person’s attitudes or
behavior.
2. Family : The family is the most important consumer buying organization in
society, and it has been researched extensively. Family members constitute the
15
most influential primary reference group. We can distinguish between two
families in the buyer’s life.
3. Roles and Statuses : A person participates in many groups – family, clubs,
organizations. The person’s position in each group can be defined in terms of role
and status.
(III) Personal Factors
A buyer’s decisions are also influenced by personal characteristics. These include the
buyer’s age and stage in the life cycle, occupation, economic circumstances, lifestyle
and personality and self-concept.
Age and stage in the cycle : People buy different goods and services over a
lifetime. They ear baby food in the early years, most foods in the growing and
mature years, and special diets in the later years. Taste in clothes, furniture
and recreation is also age related. Consumption is shaped by the family
lifecycle. Some recent work has identified psychological life-cycle stages.
Marketers pay close attention to changing life circumstances – divorce,
widowhood, remarriage – and their effect on consumption behavior.
Occupation and economic circumstances : Occupation also influences a
person’s consumption pattern. A blue-collar worker will buy clothes, work
shoes, and lunchboxs.
16
Lifestyle : People from the same subculture, social class and occupation may
lead quite different lifestyles. A lifestyle is the person’s pattern of living in the
world as expressed in activities, interests and opinions.
Personality and self – concept : Each person has a distinct personality that
influences buying behavior.
Psychological Factors : A person’s buying choices are influenced by four
major psychological factors-motivation, perception, learning and beliefs and
attitudes.
(i) Motivation : A person has many needs at any given time. Some needs
are biogenic; they arise from physiological states of tension such as
hunger, thirst, discomfort.
(ii) Perception : A motivated person is ready to act. How the motivated
person actually acts is influenced by his or her perception of the
situation.
(iii) Learning : When people act, they learn. Learning involves changes in
an individual’s behavior arising from experience. Most human
behavior is learned. Learning theorists that learning is produced
through the interplay of drives, stimuli, cues, responses , and
reinforcements.
17
Beliefs and Attitudes : Through doing and acquire beliefs and attitudes. These in turn
influence buying behavior. A belief is a descriptive thought that the person holds
about something.
Stages of the Consumer Buying Process
Six Stages to the Consumer Buying Decision Process (For complex decisions). Actual
purchasing is only one stage of the process. Not all decision processes lead to a purchase.
All consumer decisions do not always include all 6 stages, determined by the de2ree of
complexity...discussed next. The 6 stages are:
1. Problem Recognition (awareness of need)--difference between the desired state and
the actual condition. Deficit in assortment of products. Can be stimulated by the
marketer through product information-- I.E., see a commercial for a new pair of shoes,
stimulates your recognition that you need a new pair of shoes.
2. Information search-
Internal search, memory.
External search if you need more information. Friends and relatives (word of
mouth). Marketer dominated sources; comparison shopping; public sources etc.
A successful information search leaves a buyer with possible alternatives.
3. Evaluation of Alternatives needs to establish criteria for evaluation, features the
buyer wants or does not want. Rank/weight alternatives or resume search. May decide
that you want to eat something spicy. If not satisfied with your choices then return to
18
the search phase. Can you think of another alternative? Look in the yellow pages etc.
Information from different sources may be treated differently. Marketers try to
influence by "framing" alternatives.
4. Purchase decision--Choose buying alternative, includes product, package, store,
method of purchase etc.
5. Purchase May differ from decision, time lapse between 4 & 5, product availability.
6. Post-Purchase Evaluation--outcome: Satisfaction or Dissatisfaction. Cognitive
Dissonance, have you made the right decision. This can be reduced by warranties,
after sales communication etc.
Types of Consumer Buying Behaviour
Types of consumer buying behaviour are determined by:
Level of Involvement in purchase decision. Importance and intensity of interest in
a product in a particular situation.
Buyer's level of involvement determines why he/she is motivated to seek
information about a certain products and brands but virtually ignores others.
High involvement purchases--Honda Motorbike, high priced goods, products visible to
others, and the higher the risk the higher the involvement. Types of risk:
Personal risk
Social risk
19
Economic risk
The four type of consumer buying behaviour are:
Routine Response Programmed Behaviour -- buying low involvement
frequently purchased low cost items; need very little search and decision effort;
purchased almost automatically. Examples include soft drinks, snack foods, milk
etc.
Limited Decision Making buying product occasionally --When you need to
obtain information about unfamiliar brand in a familiar product category, perhaps.
Requires a moderate amount of time for information gathering. Examples include
Clothes know product class but not the brand.
Extensive Decision Making/Complex high involvement, unfamiliar, expensive
and/or infrequently bought products. High degree of
economic/performance/psychological risk. Examples include cars, homes,
computers, and education. Spend a lot of time seeking information and deciding.
Information from the companies MM; friends and relatives, store personnel etc.
Go through all six stages of the buying process.
Impulse buying, no conscious planning.
In order to produce successful ads, you must give people exactly what they want.
This article will teach you why people buy the things they do so you can design
your ads to fulfill these needs.
20
MODEL OF BUYING BEHAVIOUR
21
MarketingStimuli
ProductPricePlacePromotion
Other Stimuli
EconomyPoliticalCultural Technological
Buyer’s CharacteristicCulturalSocialPersonalPsychological
Buyer’s decision process
Problems recognitionInformation searchEvaluation of alternativesPurchase decisionPost purchase decision
Buyer’s decision
Product choice Brand choiceDealer choice Purchase timingsPurchase amount
STAGES OF CONSUMER BUYING PROCES
Problem recognition
Information search
Evaluation of alternatives Purchase
decisions
Post purchase behaviour
22
CONSUMER BUYING BEHAVIOR
High involvement Low involvement
Complex buying behaviour
Variety-seeking buying behaviour
Dissonance-reducing buying behaviour
Habitual buying behaviour
Significant differences between brands
Few differences between brands
23
INTRODUCTION OF
THE PROBLEM
24
Introduction of the problem
Its needs to be emphasized at the very outset that there is no unified, tested, and universally
established theory of buyer behaviour.what we have today are certain ideas on buyer
behaviour .some of these ideas have taken their cue from economics,others from
psychology,and yet others have drawn simultaneously from several of social sciences. Thus it is
an attempt to study the consumer behaviour with the helps of some marketing concept. Under
the two month summer training on the project,” customers profiling and purchase parameter” I
have to analyse all the factors which influences the purchase pattern of a customer and all the
factors that are responsible which forces a customer to switch over other company products.
In maruti szuki,I have to notice all the factors which attract the customers and also have a close
eye on the maketing strategy of the rival.though the span of two month is not a long time to
covers all the areas of Gorakhpur,however best effort have been made to make the report a
original one. Thus study has been undertaken to know what are purchase parameters of
customers or what are the main criteria, which a customer takes into considerations before
making any purchase decisions. No doubt automobiles industry has been increasing rapidly, but
the main fact is that how these industry are satisfying customers in case of personal mode of
transport,in these category maruti Suzuki is a leading name not nly in India but also all over
the world.
I face certain problems while completion of my project work which affected my report to a
extent but even then I made my full effort to prepare and present effective report.
25
Problems are :
The company limits projects area.
Prickly heat season affected my working capacity, and restricted me to cover distant
area entirely.
Few Customer did not exhibit any interest to fulfill the questionnaires and
interviews.
It was not simply a questionnaires rather it also involves direct communication with
the Customer as interviewing them, which was tedious as well as time consuming.
26
Scope And Importance
Of The Study
27
Scope And Importance Of The Study
The project aims to get the student out of the classroom and into the real world of companies/
competitors, markets, managers and customers. The project aims to get the student out of the
passive mode of heavy lectures, hearing about other people last experience and into the active
mode of theories for themselves in solving real problems in real and live companies. Describing
the scope of particular project has different dimensions as it reveals different crisis situation and
its solution; it is both way beneficial for researcher and for the manufacturer, service provider or
the company.
Doing a good research involves collecting data from the genuine resource with proper
implication that leads to the company for future orientation. Experience is a child of Thought
and the Thought is a child of Action. An experience is a name every one gives to their mistakes.
For a researcher, it opens the way for walking into experiences. The ultimate goal of a research
is enormous with its true sense. Physically and practically, it shows the potential for the
company and researcher.
Scope:
1. The scope of project was to collect data from the selected area of
GORAKHPUR and Analysis significance of collected data and the conclusion.
28
2. The scope of the project help in analyzing the factors, which influence the buying
behaviour of consumers.
3. The scope is such that the study has been conducted by taking samples
from different areas, which depicts the overall picture.
4. The result obtained can give an overview regarding the choice and
Preference of consumers of MARUTI SUZUKI Vechiles.
5. The study can be helpful in taking decision so as to improve the quality
and service.
6. The study can be help full in portray the role played at each levels in
different areas.
7. The study can also provide the idea about the market strategy adopted by
company.
Importance of Study:
The main purpose of study is to know the purchase parameters of consumer regarding
MARUTI SUZUKI cars. The survey was conducted in GORAKHPUR area not all but only
some parts have included for survey. Due to shortage of time it was not possible to cover the
whole areas. The customers of these areas were targeted to get the full information about the
products. The interaction with the customers was through direct meeting, Phone calls were used
for appointments with customers. Thus the scope of the study was completed with the time and
resources available.
29
OBJECTIVE OF
THE STUDY
30
OBJECTIVE OF THE STUDY
The study has been undertaken with following objectives.
To know the factors which influences a customers to make their purchase decision.
To know the general impression of customers towards maruti-suzuki
To know the advertising & promotional policy of company
To examine the marketing strategy of maruti udyog limited.
To examine the factors which forces a customer to purchase other company cars.
31
32
RESEARCH
METHODOLOGY
33
RESEARCH METHODOLOGY
Marketing Research is the backbone of marketing. The objective of my research is to
CUSTOMER PROFILING & PURCHASE PARAMETERS.
The nature of my research is exploratory research. It’s goals to shed light on the real
nature of the problem and to suggest possible selection and its involves number of steps.
I. Define the Problem & Research Objective:
Management must define a problem in broader way. Because it is said that defining the
problem is half solved and the objective of my research is to study the consumer
perception about Maruti Suzuki in Indian consumer industry.
II. Develop the Research Plan
The second stage of marketing research calls for developing the most efficient plan for
gathering the needed information. Designing the research plan calls for decision on the
data sources, Research Approaches, Research Instrumental, Sampling Plans & Contact
Methods.
(a) Data Sources
I have collected my research data from secondary as well as primary sources from
random sampling survey.
34
Primary Data
primary data are those data which are collected for the first time and are fresh and thus these
data happens to be original data in character.
Mostly in marketing research involves some primary data collection by the questionnaire
Sample Size : 100
Sample Area : Gorakhpur
Secondary Data
Secondary data are those which have already been collected by some one else and which have
already been passed through statistical process. Secondary data was collected by the books and
websites.
Magazines, Catalogue, Newspapers, Product Profile & Internet.
(b) Research approaches Primary data can be collected into five ways –
observations, focus groups, survey, behavioural data & experiments and here I have
used survey research.
TARGET MARKET
The target market of our study was mainly concentrated to the recent car buyer's and the survey
was conducted at the point of purchase.
35
METHODOLOGY
The tool used for this research is questionnaire, administered and filled by interviewees. The
questionnaire was typed and presented to respondents in an arranged manner. In this process the
personal interview came very handy in explaining the respondents the exact list of questions or
if they face any problem while answering the questionnaire or in clarifying any confusion they
had. Personal interviews provided flexibility in the sense that the researcher was able to provide
further clarification or explanation whenever required.
Following facts were kept in mind while preparation the questionnaire:
1. The questionnaire is in an easy language
2. Maximum questions are of multiple choice questions and there can be more than one
answer for most of them
3. The comments and suggestions were open-ended questions so that the respondent could
elaborate upon his thoughts
4. The size of the questionnaire is not too long. This is to make the job feasible both for the
respondents and researcher
THE RESEARCH
Aim: The aim of the research was to study the factors, which a customer perceives in a car and
the sources as well as the knowledge, which the consumer employs in gathering information for
36
the product he is planning to purchase.
Universe: The universe means the set of objects or population among which the research is to
be conducted. The universes of this task constitute all the people who have recently purchased
their cars.
Sampling Procedure: The sample design adopted was questioning buyers at the point of
purchase.
RESEARCH
Research in common parlance refers to a search for knowledge. One can also define research as
a scientific and systematic search for pertinent information on a specific topic. In fact research is
an art of scientific investigation. The advance learner’s dictionary of current English lays down
the meaning of research as “a careful investigation or inquiry especially through search for new
facts in any branch of knowledge.
OBJECTIVE OF RESEARCH---
The purpose of research is to discover answers to questions through the application of scientific
procedures. The main aim of research is to find out the truth which is hidden or which has not
been discovered as yet.
37
The main objectives of research are as follows
To gain familiarity with the phenomenon or to achieve new insight in to it.
To portray accurately the characteristic of a particular individual, situation or a group.
To determine the frequency with which something occurs or with which it is associated
with something else.
To test a hypothesis of a casual relationship between variables.
RESEARCH PROCESS—
Research process consists of series of actions or steps necessary to effectively carry out research
and desired sequencing of these steps. And the process of research can be defined by following
steps-
Formulating the research problem
Extensive literature survey
Development of working hypothesis
Preparing the research design
Determining sample design
Collection of data
Execution of project
38
Analysis of data
Testing of hypothesis
Interpretation
Preparation of report
1. Formulating the research problem ---
Research problem can be formulated on the basis of nature and variables. Initially the problem
may be stated in a broad way and than the ambiguities, if any, relating to the problem be
resolved. Then the feasibility of a particular solution has to be considered before a working
formulation of the problem can be setup. Essentially two steps are involved in formulating the
research problem, viz, understanding the problem thoroughly, and rephrasing the same in to
maniple terms from an analytical point of view.
The best way of understanding of problem is to discus it with once on colleagues or with
those having some expertise in matters. In the academic institution the researcher can seek the
help from a guide who is usually an experienced man and has several research problems in
mind. In private business units or in governmental organization, the problem is usually
earmarked by the administrative agencies.
2. Extensive literature survey ----
Once the problem is formulated, it becomes compulsory for a research worker writing a
thesis for a Ph.D. degree to write a synopsis of the topic and submit it to the necessary
committee of the research board for approval. The researcher should undertake extensive
literature survey connected with the problem. For this journals and published bibliographies are
the fist place to go to. A good library will be a great help to the researcher at this stage.
39
3. Development of working hypothesis —
After literature survey researcher should state in clear terms the working hypothesis or
hypothesis. As such the manner in which research hypothesis are developed is particularly
important since they provide the focal point for research. The development of working
hypothesis plays an important role; it should be very specific and limited to the piece of research
in hand because it has to be tested. It also indicates the type of data required and the type of
methods of data analysis to be used.
How does one go about developing working hypothesis? The answer is by using the
following approaches.
I. Discussion with colleagues and experts about the problem, its origin and objectives in
seeking a solution.
II. Examination of data and records, if available, concerning the problem for possible trends,
particularities and other clues.
III. Exploratory personal investigation which involves original field interview on a limited
scale with interested parties and individuals with a view to secure greater insight in to the
practical aspects of the problem.
4. Preparing the research design —
The research problem having been formulated in clear cut terms, the researcher will be
required to prepare a research design. The preparations of such a design facilitate to be as
efficient as possible yielding maximal information. The purpose of research may be grouped
in to four categories.
I. Exploration
II. Description
40
III. Diagnosis
IV. Experimentation
The preparation of research design, appropriate for a particular research problem, involves
usually the consideration of the following
I. The means of obtaining the information.
II. The availability and skills of the researcher and his staff.
III. Explanation of the way in which selected means of obtaining information will be
organized and the reasoning leading to the selection.
IV. The time available for the research.
V. The cost factor relating to research, i.e. the finance available for the purpose.
5. Determining sample design —
For determination of sample design ,it can be presumed that in such an enquiry when all the
items are covered no element of chance is left and highest accuracy is obtained even the
slightest element of bias in such an enquiry will get larger and larger as the number of
observation increases. Hence, quite often be selecting only a few items from the universe for our
study purpose. The items so selected constitute what is technically called a sample.
The researchers must decide the way of selecting a sample or what is popularly known as
the sample design .a sample design is a definite plan determined before any data are actually
collected for obtaining a sample from a given population. Sample can be either probability
sample or non probability sample. Probability sample are those based on simple random
sampling , systematic sampling, cluster sampling where as non probability sampling are those
based on convenience sampling, judgment sampling and quota sampling technique. A brief
mention of the important sample designs is as follows:
41
I. Deliberate sampling ---
Deliberate sampling is also known as purposive or non-probability sampling. This
sampling method involves purposive or deliberate selection of particular units of the universe
for constituting a sample which represents the universe. When population or elements are
selected for inclusion in the sample based on the ease of access, it can be called convenience
sampling. If a researcher whishes to ensure data from, say, Gasoline, buyers, he may select a
fixed number of petrol stations and may conduct interview at these stations. This would be an
example of convenience sample of Gasoline buyers. On the other hand, in judgment sampling
the researcher’s judgment is used for selecting items which he considers as representative of the
population.
II. Simple random sampling —
This type of sampling is also known as chance sampling or probability sampling where
each and every item in the population has an equal chance of inclusion in the sample and each
one of the possible samples. For example, if we have to select sample of 300 items from a
universe of 15000 items, than we can put the names or numbers of all the 15000 items on slips
of paper and conduct a lottery.
III. Systematic sampling —
In some instances the most practical way of sampling is to select every 15 th name on a
list, every ten hose on one side of street and so on. Sampling of this type is known as systematic
sampling. In such a design the selection process starts by picking some random point in the list
and then every nth element is selected until the desired number is secured.
IV. Stratified sampling —
42
If the population from which a sample is to be drown does not constitute a homogeneous group,
then stratified sampling is applied. If the item selected from each stratum is based on simple
random sampling the entire procedure, first stratification and then simple random sampling, is
known as stratified random sampling
V. Quota sampling —
In stratified sampling the cost of taking random sample from individual strata is often so
expansive that interviewers or simply given quota to filled from different strata. Quota samples
generally happen to be judgment samples rather than random samples.
VI. Cluster sampling and area sampling —
Cluster sampling involves grouping the population and then selecting the groups or the clusters
rather than individual elements for inclusion in the sample, suppose some departmental stores
wishes to sample its credit card holders. It has a suit its cards to 15000 customers. The sample
size is to be kept say 450. For cluster sampling this list of 15000 holders could be formed in to
100 clusters of 150 card holders each.
VII. Multistage sampling —
This is further development of idea of cluster sampling. Under multi stage sampling the
first stage may be to select large primary sampling units such as states, then districts, then towns
and finally certain families within towns.
VIII. Sequential sampling —
This is some what a complex sample design where the ultimate size of the sample is not fixed in
advance but is determined according to mathematical decisions on the basis of information
43
yielded as survey progress. This design is usually adopted under acceptance sampling plan in
the context of statistical quality control.
6) Collecting of the data —
Once the sample design is decided then it becomes necessary to collect data that are appropriate.
There are several ways of collecting the appropriate data which is differ considerably in context
of money cost, time and other resources at the disposal of the researcher.
Primary data can be collected either through experiment or survey. If the researcher
conducts and experiments, he observes some qualitative measurements, or the data, with the
help of which he examines the truth contain in the hypothesis. But in the case of survey, data
can be collected by anyone or more of the following ways.
By observation: - this method implies the collection of information by way of
investigators own observation, relates to what is currently happening and is not complicated by
either the past behavior or future intentions or attitudes of respondents.
Through personal interview: - This method of collecting data is usually carried out in a
structured way where output depends upon the ability of the interviewers to a large extent.
Through telephone interviews: - This method of collecting information involves
contacting the respondent on telephone itself, when the survey has to be accomplished in a very
limited time.
44
By mailing of questionnaires: - Questionnaires are mailed to the respondents with a
request to return after completing the same. It is the most extensively used method in various
economic and business surveys. Before applying the method, usually a pilot study for testing the
questionnaires is conducted wh9ich reveals the weaknesses, if any, of the questionnaires.
Through Schedules: - Under this method the enumerators are appointed and given
training. These enumerators go to respondents with these schedules. Data are collected by filling
up the schedules by enumerators on the basis of replies given by respondents. Some occasional
field checks on the work of the enumerators may ensure social work.
7. Execution of the project :-
Execution of the project is a very important step in the research process. If the execution of the
project proceeds on correct line, the data to be collected would be adequate and dependable. The
researcher should see that the project executed in a systematic manner and in time. If the survey
is to be conducted by means of structured questionnaires, data can be readily machine-
processed. In such a situation, questions as well as possible answers may be coded. The training
may be given with the help of instruction manuals which explain clearly the job of the
interviewers at each step. A careful watch should be kept for unanticipated factors in order to
keep the survey as much realistic as possible.
If some of the respondents do not co-operate, some suitable method should be design to
tackle this problem. One method of dealing with a non response problem is to make a list of the
non respondents and take a small sub sample of them, and then with the help of experts vigorous
efforts can be made for securing response.
45
8. Analysis of data:-
After the data has been collected, the researcher turns to the task of analyzing them. The
analysis of data requires a no. of closely related operation such as establishment of categories,
the application of these categories of raw data through coding, tabulation and then drawing
statistical inferences. Thus, researcher should classify the raw data in to some purposeful and
usable categories.
Coding operation is usually done at this stage through which the categories of data are
transformed in to symbols that may be tabulated and counted.
Editing is the procedure that improves the quality of the data for coding. Whit coding the
stage is ready for tabulation.
Tabulation is a part of the technical procedure where in the classified data are put in the
form of tables.
Analysis work after tabulation is generally based on the computation of various percentage
coefficients etc. by applying various well defined statistical formulae. In the process of
analysis, relationship of differences supporting or conflicting with original or new
hypothesis should be subjected to taste of significance to determine with what validity data
can be said to indicate any conclusion(s).
9. Hypothesis testing :-
After analyzing the data as stated above the researcher is in a position to test the hypothesis,
if any he had formulated earlier. Do the facts support the hypothesis or they happen to be
contrary? This is the usual question which should be answered while testing hypothesis. Various
tests such as Chi-square test, t-test, and f-test have been developed for the purpose. The
hypothesis may be tested by using one or more of such tests.
46
10.Generalizations and interpretation: -
If a hypothesis is tested and upheld several times, it may be possible for the researcher to
arrive at generalization. i.e. to build a theory. As a matter of fact the real value of research
lies in the ability to arrive at certain generalizations. If the researcher had no hypothesis to
start with he might seek to explain his findings on the basis of some theory. It is known as
interpretation.
11. Preparation of the report or thesis: -
Finally the researcher has to prepare the report of what has been done by him. Writing of
report must be done with great care keeping in view the following.
1. The layout of report should be as follows—(1) the preliminary pages; (2) the main text ;(
3) the end matter.
In its preliminary pages the report should carry time and date followed by the
acknowledgements and foreward. Then there should be a table of contents followed by a list of
tables and list of graphs and charts, if any, given in the report.
The main text of the report should have the following parts.
(a) Introduction: - It should contain a clear statement of the objective of the research
and an explanation of the methodology adopted in accomplishing the research.
The scope of the study along with various limitations should as well be stated in
this part.
47
(b) Summary of findings: After introduction there would appear a statement of
finding and recommendations in non-technical language. It the findings are
extensive they can be summarized.
(c) Main report: The main body of the report should be presented in logical
sequence and broken-down into readily identifiable sections.
(d) Conclusion: Toward the end of the main text, researcher should again put down
the results of his research clearly and precisely. In fact it is the final summing up.
At the end of the report, appendices should be enlisted in respect of all technical data.
Bibliography, i.e. list of books, journals reports etc., consulted, should also be given in
the end. Index should also be given specially in a published research report.
2. Report should be written in a concise and objective style in simple language avoiding
vague expressions such as ‘it seems’, ‘there may be’, and the like.
3. Charts and illustrations in the main report should be used only if they present the more
information more clearly and forcibly.
4. Calculated ‘confidence limits’ much be mentioned and the various constraints
experienced in conducting research operations may as well be stated.
48
INTRODUCTION
OF THE ORGANISATION
49
COMPANY PROFILE
Maruti Udyog Limited (MUL) was established in Feb 1981 through an Act of Parliament, to
meet the growing demand of a personal mode of transport caused by the lack of an efficient
public transport system. Suzuki Motor Company was chosen from seven prospective partners
worldwide. This was not only due to their undisputed leadership in small cars but also to their
commitment to actively bring to MUL contemporary technology and Japanese management
practices (which had catapulted Japan over USA to the status of the top auto manufacturing
country in the world). A license and a Joint Venture agreement were signed between Govt of
India and Suzuki Motor Company (now Suzuki Motor Corporation of Japan) in Oct 1982. The
objectives of MUL then were: Modernization of the Indian Automobile Industry, Production of
fuel-efficient vehicles to conserve scarce resources, Production of large number of motor
vehicles which was necessary for economic growth.
The Revolution
Maruti created history by going into production in a record 13 months. On 14 December 1983,
the then Prime Minister of India, Mrs Indira Gandhi, handed over the keys of the first car to Mr.
Harpal Singh of Delhi. Volume targets were routinely exceeded, and in March 1994, it became
the first Indian company to produce over one million vehicles, a landmark yet to be achieved by
any other car company in India. Maruti is the highest volume car manufacturer in Asia, outside
Japan and Korea, having produced over 3.5 million vehicles by December 2001. Maruti is one
of the most successful automobile joint ventures, and has made profits every year since
50
inception till 2000-01. In 2000-01, although we generated operating profits on an income of Rs
92.5 billion, high depreciation on new model launches resulted in a book loss. We are again on
track for profits in 2001-02, with a profit of Rs 300 million in the first half. In this period, sales
were increased by 5.3%, against an industrv decline of 6.1 %. We revolutionized the wav
Indians looked at cars. "No other car company so completely dominates its home market" - (The
Economist). Despite there being 11 companies now in the passenger car market, Maruti holds
about 60 % of the total market share. MUL is also the first and only car company in the world to
lead its home market in terms of both market share and in the JD Power Customer Satisfaction
study (JD Power Asia Pacific 2000 India Customer Satisfaction studies).
Transfer of Technology
Every minute two vehicles roll out of the Maruti Plant. It is therefore imperative that the transfer
of contemporary technology from our partner Suzuki is a smooth process. Great stress is laid on
training and motivating the people who maintain the equipment, since the best equipment alone
cannot guarantee high quality and productivity. From the beginning it was a conscious decision
to send people to Suzuki Motor Corporation for on-the-job training for line technicians,
supervisors and engineers. This helps them to imbibe the culture in a way that merely
transferring technology through documents can never replicate. At present 20 % of our
workforce is trained under this program.
Our Ethos
Our employees are our greatest strength and asset. It is this underlying philosophy that has
molded our workforce into a team with common goals and objectives. Our Employee-
Management relationship is therefore characterized by: Participative Management, Team work,
51
Kaizen, Communication, Information sharing, and an open office culture for easy accessibility
to implement this philosophy. We have taken several measures like a flat organizational
structure i.e. there are only three levels of responsibilities ranging from the Board Of Directors,
Division Heads to Department Heads. Other visible features of this philosophy are common
uniforms (at all levels), and a common canteen for all. This structure ensures better
communication and speedy decision making processes. It also creates an environment that
builds trust, transparency and a sense of belonging amongst employees.
Maruti eyes Global Pie, to be R&D Hub for Suzuki
New Delhi: With the enhanced backing of Suzuki, Maruti Udyog is gearing up to become a
global scale player and will be a R&D centre for Suzuki cars outside Japan. Becoming a global
player is the resurgent theme of Maruti's future strategy in the post-privatization phase as listed
in the IPO offer document filed with Sebi.
In terms of manufacturing processes or quality systems or even R&D, the flavor is global.
Clearly, the company wants to build on its leadership in the domestic market and make a place
for itself in the global arena.
After sharp gains in productivity and quality in the past two years, the company wants to further
improve its operating efficiencies by cutting costs by 30% and enhancing productivity by 50%
and align itself with Suzuki's Kosai plant in Japan by year '04-05. On the quality front, while
Maruti was amongst the first automobile manufacturers in the world to receive the ISO
901:2000 certification, it wants to go further and adopt Suzuki's global customer audit index.
But the biggest shift is in the area of R&D. Although Maruti has gained from its expertise in
localization of components, it now wants to take R&D to another plane where it can become
Suzuki's centre for cars in Asia, outside Japan.
In fact, it has recently acquired the capability to conduct minor and major face lifts to its
52
products and upgrade products in terms of technology or features. To reduce initial investment
on models, Maruti may outsource dye from other than Japan, such as Taiwan, which are often
less expensive.
Maruti's initiatives are based also on its recent success in the export market. It sold nearly
24,000 units of the Alto in Europe last fiscal and its overall exports were up by a whopping
163% over the previous year.
Its global ambitions are also now nurtured by the backing of Suzuki Motor
Corporation. The prospectus makes this point by Sayin2 that as a subsidiary of Suzuki, Maruti
has "access to globally respected technology in the small car segment. "
Even while maintaining the overall global theme, Maruti wants to leverage its local advantage.
Its promise of providing customers a "wide range of Maruti branded services at different stages
of ownership" is at par with other global manufacturers. It lays great emphasis on these Maruti
branded services like insurance, finance and pre-owned cars, and believes that this "360 degree
customer experience" will secure repeat purchase and increase revenue of the sales network. In
supply chain initiatives as well, Maruti's reference is to the world wide purchase system fostered
by General Motors. Through this, it could make a select few of its vendors the sole suppliers
for Suzuki products in several countries.
Our focus will continue to be the small car: Jagdish Khattar
From a loss of Rs 269 crore in 2000-01, after being written off by many analysts, Maruti has
bounced back: its 800 model is as popular as ever, new launches are picking up. Jagdish
Khattar, managing director Maruti, spoke to Vinay Pandey on Maruti's transformation.
Excerpts: Maruti's turn around: To understand Maruti today, you need to go back to 1993 when
liberalization took place and foreign manufacturers were allowed to come.
53
Maruti should have taken proactive measures then. But between 1995 and 1998 our
shareholders (the government and Suzuki) had differences. Decisions that should have been
taken in the mid-90s to prepare for competition got delayed.
In June 1998, we decided to increase our capacity by one lakh vehicles and to introduce four or
five new models, which arrived a year and a half after our competitors', who gained from this.
Two, investments that should have been done over five years were done in 24 months in a hurry
to launch new models. So, localization was low, the yen was strong, prices were market-
determined, depreciation increased, and we ran into losses. That's when you got the feeling
Maruti was in trouble.
But internally, it was a very good wake up call, which did a lot of good to us. We brought out
models, localized faster, cut costs massively.
So even when everyone thought we were in trouble, we were confident that we'd bounce back.
Our market share went down to 61%, but we've now stabilized around 58-59%. We took off a
bit late, had lot of catching up to do, which we've done.
Role of M800: People say 800 is old and so on. But go on the road and see someone on a two-
wheeler, wife and two children, in rain, in winter, in summer. Is he going to be bothered about
power windows and steering, or does he wish to be in a car and be comfortable? Today we're
selling air-conditioned 800s at Rs 2.2 lakh. Many people buying AC 800s may not have an AC
54
at home. So, look at the tremendous role it is playing.
India's car penetration is six per 1,000; Pakistan and Sri Lanka are at 12. Thailand is at 200,
Japan and America are over 500-600. What I'm saying is that there's still a huge gap. If our
motorization has to increase, we can't do that by selling expensive cars. We need to make cars
more affordable. Therefore, a narrower gap between two-wheelers and entry-level cars is what's
required. It should also have good performance, no compromise on quality, fuel-efficient and
low on maintenance. The 800 fits the bill.
The Alto can't replace the 800 today because the volume and price at which 800 is selling, we
can't sell Alto at that. Yes, once we get costs under control, we'll position the Alto between
segments A and B. We'd like to have a car from the entry level to Rs 3-3.5 lakh at every Rs
20,000- Rs 25,000 difference.
Success of new models: Historically, Maruti's new models never start with a bang. I joined
Maruti in 1993 when Zen was introduced and we found it hard to sell initially. We had to reduce
our production plan drastically, but then after a year or two it caught on. And look what it is
today.
So, initially there's skepticism, then some people buy and share their experience. About 60-70%
of our sales take place by referral. I'm not saying marketing is unimportant, but there's nothing
more effective than a present owner giving a good chit to prospective buyer. We're seeing the
same effect with Wagon R, which is doing really well now.
Versa is slightly different. When we decided on Versa, in 1998, the government had announced
that in April 2002 the administered price mechanism (APM) for oil would be abolished. The gap
55
between petrol and diesel prices would have then been negligible. Versa came, but APM
remained.
Now there is no hell of a chance of anyone buying a petrol version when a diesel alternative is
available for the same purpose. For the Versa we've carried out a lot of localization, the pricing
has been reworked and things are looking up. But some amount of disadvantage between petrol
and diesel will remain.
Those who bought the Baleno are very happy. Also, view it from our perspective. We launched
five models in a space of 12 months. We had to prioritize. Because of low localization, we were
losing money on Baleno.
So it made no sense to just gain numbers. Now some localization has taken place and the
product is getting its due. The Vitara is different, it's not manufactured here. We'll import what
is required.
Anyway, our core competence and focus would be the small car because that is what the county
needs and that is where the volumes are. Let us look at it in another way. There are only four
major players in the small car segment - Telco, Fiat, Hyundai and Maruti and 80 % of the
market is the small car segment. In the remaining market, there are a dozen players. It is a very
lopsided market structure today.
56
PRODUCT PROFILE
MARUTI 800
Economy
Great technology enables the Maruti 800 to deliver great fuel efficiency. The Maruti 800
shas topped every fuel efficiency survey that has been conducted in the past. The Maruti
800 has the lowest fuel cost per kilometer of any petrol car in the country with a cost of
Rs 1.94 per kilometer.This confirms the position of the Maruti 800 as the most fuel
efficient petrol car in the country.
57
MARUTI OMNI
For the family
This car position itself in the mind of consumer as afamily car. The punch line of the car
is “toal solution of the entire family”
Features are:
MPFI Engine
The multi-point fuel injected engine helps to lower emissions and achieve greater fuel
efficiency. With 37 bhp @ 5000 rpm, you have greater pulling power. A torque of 6.32
kgm @ 3000 rpm ensures better climbing power and lesser gear changes. In other words,
less fatigue.
58
Space
Stretch out. Open up. Enjoy the luxury of space inside the Omni. The ample headroom
and legroom make long rides comfortable and enjoyable. Reclining front seats with
adjustable head restraints let you relax completely. With its ample luggage space, the
Omni is equipped for anything. Pack in your family, your group of friends, your luggage,
your golfing gear, and your picnic hamper all can fit in snugly.
59
MARUTI ALTO
Features are:
MPFI Engine
Plenty of power, great mileage and low emission make the Alto the perfect choice for
Indian roads. The fuel efficiency of the Alto is better than any other vehicles in its class.
The 16x4 hypothec MPFI engine delivers unadulterated power, begging for fun. The 4-
valves per cylinder MPFI engine mated with a 5-speed gearshift and a 16-bit on-board
computer allows the Alto to effectively combine power with optimal fuel efficiency
60
Reliability
Here's another first by ALTO, which has been setting records since its introduction
in India!
Alto becomes the first Indian car to undergo a 24 hours endurance test and sets 13
national records in the process !!! The test was conducted on 2nd & 3rd August on the
high-speed track of the National Centre for Automotive Testing (NCAT) at the Vehicle
Research and Development Establishment (VRDE), Ahmednagar.
61
WAGON R
Comforts
The smarter race knows exactly how to take the stress out of driving and push driving
comfort to the max. Full flat folding front seats and reclining rear seats allow you to
stretch yourself during long drives. This ensures that you travel in maximum comfort as
compared to cramped seating arrangements in other cars.
The McPherson strut suspension in the front and coil springs at the rear ensures a smooth
comfortable drive. It's not just comfort; Wagon R also has a 1061cc MPFI low friction
engine
62
Space
Nothing cramps the style of the smarter race. That’s why it prefers the Wagon R. Tall
body, high seats and wide opening doors make it easy to get in and get out. Seven cm
taller than the Santro, the Wagon R offers more headroom, amazing spaciousness and
a commanding driving position. The split rear seating arrangement along with fully
reclining front and the reclining rear seats gives a first class airline seating comfort.
The Wagon R comes with an extra large boot space, which is possible because of its
unique design that maximizes space on a compact platform. Caution, safety and
protection are integral to a smarter mindset. And the Wagon R is designed to satisfy
every concern. Just check out the battery of safety features:
Dual side-impact beams in the front and rear doors protect you from lateral collisions.
A long crumple zone shields you in the unlikely event of a frontal collision.
A Roll Control device in the front suspension imparts greater stability and helps the
Wagon R to negotiate sharp curves at high speeds. The 8 inch booster-assisted brakes
equip you well to handle any emergency High seating position gives you a bigger
field of view, allowing you to better anticipate traffic problems before they occur.
63
MARUTI VERSA
One great drive. Twice the safety
The Versa is one of the safest cars on the road. It has safety features to guard your
loved ones from road disasters. Side impact absorbing beams in all 4 doors protect the
passengers from side crashes. Front impact beams between the front pillars and the
collapsible steering column shield you from head on collisions. A steel pipe frame in
the rear seat safeguards your family from rear impacts.
ELR seat belts allow free movement, but hold you securely during sudden stoppages.
Height adjustable head restraints, brake boosters and a collapsible steering column
further ensure your safety. When you step out of the house and into your Versa, rest
assured
64
Sink in. Stretch out. Lie back. Indulge
Versa's the ideal car for long journeys. Now stretch your legs on those long rides. All
seats* have recliners. In SDX, the 2nd row bucket seats can be slid forward or
backward independently to suit the convenience of the passengers.
The high seat position makes it easy to get in and out and gives superior road
visibility. The front row seats have thick insulation between seat and the engine. Two
layers of PUF and aluminum sheets act as a buffer, protecting the driver from engine
heat. The rear seat also has a steel pipe frame for protection in the event of a rear
impact.
* Except for the folding seat in 2nd row (DX, DX2) and last row seats.
65
MARUTI GYPSY
Gypsy Advantage
Hills
Higher ground clearance of 210 mm to ensure better off-road handling.
Diaphragm Spring Clutch designed to with stand higher rotational speeds requiring
less release load ,thereby reducing the wear of parts
Snow
66
The Engine that’s high on thermal conductivity, and heats up quickly even under
extremely cold conditions. Thus, there are no starting problems even in the midst of
snow.
1300 cc petrol engine — lighter than a diesel engine, resulting in a higher power to
weight ratio. This ensures better control, more power and greater responsiveness.
Desert
The Engine avoids overheating because its high thermal conductivity enables it to
give off heat much faster
Streams
Maximum power of 80 bhp @ 6000 rpm makes for easier crossings.
4-Wheel drive for better control and more power at the wheel.
A higher power to weight ratio of 0.0812 ensures faster acceleration through streams
and muddy terrain.
DIRT TRACKS
Dirt tracks
Steering Damper ensures that shocks encountered from bumps and potholes are not
passed on to the steering wheel. Thus, any loss of control owing to unexpected obstacles
is avoided.
67
The Gypsy is a lighter vehicle weighing in at 1020 kg (hard top) and 985 kg (soft
top). This is a major advantage on sandy or muddy tracts — a heavier vehicle will get
stuck but the Gypsy keeps
68
MARUTI ESTEEM
Safety
8 inch vacuum booster assisted brakes ensure precise, stable and safe stopping.
Collapsible steering column protects the driver in case of frontal collision.
Rugged monocoque chassis and crumple zones distribute collision impact.
Side impact beams on all four doors provide safety during side impacts
Comfort
A refreshed cabin, ergonomically designed low fatigue seats, a super cool AC and
tubeless tyres promise to pamper you with an unexpected level of comfort and driving
pleasure. Supercool AC for a comfortable drive
69
Precise power steering for total control
McPherson strut suspension for a smoother ride
Tubeless tyres for superior road grip
New white lit dials for easy viewing
Low fatigue seats
Performance
At the heart of this beauty lies a state-of-the-art Japanese engine that will give you the
power you've always craved for and performance that has already won accolades
MPFI, 16 valve, 16-bit, 1300 cc All Aluminum Engine (ACE)
Acceleration of 0-100 kmph in 11.49 secs* Highest power-to-weight ratio of 99 bhp
per ton
85 bhp @ 6000 rpm (Petrol)
Higher torque of 106 Nm @ 3000 rpm for quick pickup (Petrol)
70
GRAND VITARA
Comforts
The smarter race knows exactly how to take the stress out of driving and push driving
comfort to the max. Full flat folding front seats and reclining rear seats allow you to
stretch yourself during long drives. This ensures that you travel in maximum comfort as
compared to cramped seating arrangements in other cars.
The McPherson strut suspension in the front and coil springs at the rear ensures a smooth
comfortable drive. It's not just comfort; Wagon R also has a 1061cc MPFI low friction
engine
71
DATA PRESENTATION
&
DATA ANALYSIS
72
DATA PRESENTATION
Data Presentation has been divided into 2 parts
1. A detailed analysis has been done for all the segments in Maruti.
2. Santro, which is the major competitor of Maruti, has been analyzed in a simile
way so as to determine the factors that are taken into consideration by the
customer while comparing the car.
Model wise division of the cars purchased
Cars purchasedMaruti
800Omni Zen Alto WagonR Versa Esteem Baleno
33 6 20 9 30 2 13 1
73
Interpretation:
The above figure shows that the 800 model of Maruti still commands a good share in the
market, followed by WagonR and hot selling Zen. Maruti 800 is the undisputed king of
the roads.
Alto is an upcoming model and has the largest share in the export category, and is
marketed in Europe. V _rsa's sale has got to pick up because costumers have an unclear
picture in their mind regarding the car being high priced which is actually a myth.
74
Q.What was the purchase mode of Vehicle?
Mode of
PurchaseCash ICIC Stan chart HDFC CITIBANK ABN-AMRO
16 36 9 12 8 33
Interpretation:
As can be seen in the figure above the availability of easy loan has attracted the
consumers to much so that the out of the cars purchased only 13.5 % of the vehicles are
paid for in cash. With the mushrooming of finance companies the rate of interests has
been continuously reducing.
The two rivals in car financing are ICICI and ABN-AMRO bank with ICICI leading the
race due of more and wider presence.
75
Easy availability of finance have up surged the demand for higher segment cars with
more and more people who have the capability of paying cash opting for finance due to
hassle free approvals and lowest interest rates.
Q.Which brands are mostly preferred by customers?
The brand-recalling test showing the brand that has the picture in consumer's mind
Brand Recalling Maruti Hyundai Tata Honda Fiat Ford
97 66 40 20 19 12
As seen in the figure above somewhere down the line people do recall Maruti when they
are asked to name a brand that comes to their mind at the first instance. Followed by
Maruti is a close competitor Santro which relies on aggressive marketing tools, followed
76
by the good old Tata which their flagship Indica.
It can be seen that the more the people recall the brand the more likely are the chances of
good sales turnover.
Q.Which advertisements of MARUTI SUZUKI Strike mostly?
The advertisements that strike
Maruti
Advertisement WagonR Versa Alto Maruti800 service Zen Santro
21 14 18 17 19 8 74
Interpretation:
As said earlier in the above brand recalling analysis Santro commands a higher recalling
77
power when it comes to Media advertisements because of its high advertisement budget.
Also the hot favorite in Maruti ads is the Bachhan father and son ad with the highest
recalling in Maruti brand of cars.
Q.Which Sports Channel is mostly watched by customer?
SPORTS CHANNEL STAR Zee SONY
54 24 15
78
Q.Which Entertainment Channel is mostly watched by Customers?
Entertainment STAR Zee SONY
54 24 15
79
Q.Which Newspaper is mostly read by Customers?
Newspapers read TOI HT ET DAINIK NAV TIMES
48 38 11 7 10
80
Q.Which Magazines is mostly read by Customers?
Auto Business
Magazines read India Outlook Overdrive world India
81
Today
14 9 4 8 34
Interpretation:
Summarizing the above figures we can say that the people watch Star Sports the most
followed by ESPN and Ten sports therefore we can say that it would be better for Maruti
to advertise on Star rather than Ten sports. But one has to look at the target audience and
then make a feasible decision; it is possible that a media is good for a certain class of
target audience. For e.g. the Grand Vitara which is the latest offering from Maruti has to
be marketed through a totally different channel due to a different class of society being
targeted for the same.
Similarly most people prefer watching Aaj tak to NDTV therefore it would be wise to
choose this channel amongst the news channels for reaching the audience. Likewise Star
82
has a much wider coverage than other entertainment channels followed by Zee and Sony
India.
Print media is perhaps the most effective and the most widely circulated media and a
good medium for advertising but one has to be sure about its target audience and then
resort to division of the same into different segments. Such as people reading English
newsprints or Hindi or for that matter any other language but it is important that to make
the ad effective it should be positioned right. TOI is the most widely circulated as well as
read newspaper in and around Delhi, followed by Hindustan times.
Similarly the magazine India Today is quite a source of good information for the elite
class.
There is a saying that "Advertising is a social waste" but it is advertising that makes the
customer aware and the right kind of expenditure is definitely a necessity in today's
competitive environment.
Now the most important question that comes to the consumers mind when he plans to
purchase a car of at the time of purchasing the car. Whether he wants economy or style,
discount or resale, features or services, of all in the same package.
83
Purchase Parameters
We asked the customers to rank the factor, which lured him to purchase the car, the
following parameters were taken:
1. Price
2. Discount
3. Mileage
4. Resale
5. Looks
6. After sale service
7. References
8. Advertising Features
9. Brand image Repeat purchase
The interviewees were asked to rank the top 6 factors, which helped him to choose the
brand he has chosen.
For this we have done a model-based study wherein we have taken those models, which
have a sample size of 10 and above.
For the ease of understanding we took ranking in percentage form, also because of
unequal sample sizes it became necessary to take figures in percentages so that the study
is not biased.
84
STEPS of computation of ranks:
1. Calculating how many people gave what ranks to the factors, which were taken under
consideration, and summing them up.
Maruti800 sample size=33
Resale After Adver- Brand Repeat
Ranks Price Discount Mileage value Looks sales Reference tising Features Image purchase
1 21 1 2 2 1 0 0 0 0 5 1
2 3 4 11 5 3 3 2 0 1 1 0
3 3 1 7 5 8 5 1 1 1 1 0
4 0 0 2 3 8 10 0 1 1 8 0
5 0 2 3 4 3 3 4 1 4 6 3
6 0 3 2 2 2 4 4 2 8 5 1
In the figure above 21 people gave price as its first preference followed by 3 people each
who gave 2nd and 3rd rank to price. Similarly for mileage 2 people had ranked it 1st and
so on
85
2. Percentage representation of the same out of the sample size of 33 customers.
Resale After Adver- Brand Repeat
Ranks Price Discount Mileage Value Looks sales Reference tising Features Image purchase
1 0.64 0.03 0.06 0.06 0.03 0 0 0 0 0.15 0.03
2 0.09 0.12 0.33 0.15 0.09 0.09 0.06 0 0.03 0.030
-
3 0.09 0.03 0.21 0.15 0.24 0.15 0.03 0.03 0.03 0.03 0
4 0 0 0.06 0.09 0.24 0.3 0 0.03 0.03 0.24 0
5 0 0.06 0.09 0.12 0.09 0.09 0.12 0.03 0.12 0.18 0.09
6 0 0.09 0.06 0.06 0.06 0.12 0.12 0.06 0.24 0.15 0.03
3. Taking weights for the ranks so that all the figures come on a common platform
Ranks Weights
1 30%
2 25%
. 3 20%
4 12.50%
5 7.50%
6 5%
86
Rank 1st have been given a 30 percentage weigh because this is driving factor i.e. it is the
first and foremost thing that comes to a consumers mind when he goes for a purchase,
likewise rank 6th which is somewhere in the mind of customers but doesn't make an
impact on the purchase decision.
4. Multiplying the percentages found in step 2 with their respective ranks to get a
cumulative score.
Resale AfterAdver
-Brand Repeat
Ranks PriceDiscoun
t
Mileag
evalue Looks sales Reference tising Features Image purchase
1 0.192 0.009 0.018 0.018 0.009 0 0 0 0 0.045 0.009
2 0.023 0.03 0.083 0.038 0.023 0.023 0.015 0 0.008 0.008 0
3 0.018 0.006 0.042 0.03 0.048 0.03 0.006 0.006 0.006 0.006 0
4 0 0 0.008 0.011 0.03 0.038 0 0.004 0.004 0.03 0
5 0 0.005 0.007 0.009 0.007 0.007 0.009 0.002 0.009 0.014 0.007
6 0 0.005 0.003 0.003 0.003 0.006 0.006 0.003 0.012 0.008 0.001
TOTAL 0.233 0.055 0.161 0.109 0.12 0.104 0.036 0.015 0.039 0.111 0.017
5. Graphical representation of the total scores
87
The above figure clearly depicts that the customer base of Maruti 800 is much more price
cautious and mileage is the next best thing that they want. But they do give importance to
the looks, after sales service and resale value of the car. These people are also inclined
towards the brand image of Maruti 800.
That is probably the most important reason that 800 is called the bread and butter
car and still the highest selling car in its segment. Similarly we can do it for the
other segment:
88
WagonR
Resale After Brand Repeat
Price Discount Mileage value Looks sales Reference Advertising Features Image purchase
0.122 0.035 0.185 0.109 0.144 0.129 0.04 0.004 0.134 0.125 0.05
As seen in the figure above this segment of buyer are much more conscious about
mileage and looks of the car, they seem to like the TALLboy look of the Wagon R.
Next in line comes the after sales service, features and brand image. Maruti which has the
widest network of sales and service enjoys the trust of people and with a car with a true
international look i.e. the WagonR consumer are sure to make the neighbors envy.
It can be seen that the price has taken the back seat in this segment because the people
to whom this car cater are mostly second time buyers.89
This category witnesses the second most repeat purchases due to the trust that these
consumers have in Maruti.
Zen
Resale After Adver Brand Repeat
Price Discount Mileage value Looks Sales Reference tising Features Image purchase
0.157 0.021 0.141 0.113 0.312 0.101 0.04 0.019 0.124 0.089 0.062
Interpretation :
Zen is ultimately a world-class car with international looks. It has been rated next to
Mercedes for the most image conscious people, and probably that's the reason why
consumers have given it so high on looks.
Zen which the one of the most reliable car in its class has a good features list and to top
90
up it has an excellent after sales with more than 90% indegenisation.
The quote "ADD ZEN TO YOUR LIFE" is truly a world class similar to the car.
Esteem
Resale After Adver Brand Repeat
Price Discount Mileage Value Looks Sales Reference Tising Features Image Purchase
0.165 0 0.185 0.1205 0.1035 0.16 0 0.00525 0.085 0.041 0.107
Esteem is one of the best cars in its segment with a very good value for money and the
highest repeat purchases; this shows the worth of the car. With the introduction of a mpi
engine it has become an amazing car to drive with a good fuel economy as seen in the
figure above this is one of the top most reasons that the customers look in this car. It is
91
priced very wen as compared to its rivals giving it an upper edge also it is the car with the
2ood resale value and engine life.
92
Santro
Resale After Adver Brand Repeat
Price Discount Mileage value Looks sales Reference tising Features Image purchase
0.085 0.116 0.134 0.097 0.131 0.106 0.0447 0.031 0.093 0.107 0.024
Now comes the rival and the closest competitor of Maruti Le. Santro. As seen in the
figure it is clear that the customers opt for the Xing thing because of its mileage which
they perceives is more in this car, looks does leave an impression this can be seen from
the ranking above.
Also it is clear from the above graph that Santro is offering its customers lots of discount,
93
discounts that are the favorite of the Indian market. Xing is more popular amongst kids.
94
FINDINGS OF THE STUDY
95
Findings
The company is making proper balance between all the marketing mix factors viz
product,price,promotion and place unto some extent. Hence the marketing mix decision
and strategies of the company should be made according to customer expectations, as the
modern concept of marketing is customer oriented. The firm should modify its products
quality and placement procedure to get optimum customer satisfaction. The company
orientation towards the market place and target consumers is on the right way considering
the mileage, which is emerging as a prime factor to compete the market. This concept
emphasis on promotion efficiency but considering only Mileage to achieve consumer
satisfaction is not sufficient. So the company should consider the external quality of the
product. The company should provide proper supply of the product to their authorized
dealers so they may fulfill the requirement of their sub-dealers located in small centers.
The company should make SWOT analysis time to time to know about it
strength,weakness,and to precise the opportunities and threats in the market so that
company can equip itself to tackle and type of challenges .On the basis of analysis we
found that some consumers want some change in product. These changes are like having
spacious seats, good looking & comfortable as it is found in case of Santro. The research
and development department of company is good but not up to mark it should be
according to customer’s demand. According to our analysis we found that the most of the
consumers are complaining about the fading of colour.They also want some more
exciting colour combination and stickers.
96
CONCLUSION
It can be seen that the Indian car industry is a flourishing one, and a driving force behind
any economy therefore it is necessary that this sector is given proper importance. Maruti
which has now been divested has to compete in an environment with more than a dozen
player and no government support, hence it is necessary that the company retains it own
customer and attract more and more so as to produce in the large scale and attain
economies of scale.
Santro which is a major player in the market has swiped away maruti's share and in the
future would continue to do so, hence our study should be made handy so as to choose
the right marketing mix i.e. the product, price, place, promotion.
One has to see all the factors from the consumer's perspective to stay and reap the
benefits in the current market otherwise face the crisis just like Fiat India did.
For this it is necessary for the company to do a SWOT analysis, which would be helpful
in determining what are its strength, its weakness, the opportunities, and threats from its
rivals. Here is a very small SWOT analysis that has been made after listening to the
customer's perspective.
97
SWOT ANALYSIS
WHAT IS SWOT ANALYSIS:-SWOT is acronym for strengths, weakness,
opportunities and threats. While a port unities and threats can be identified by
environment analysis, strengths and weaknesses can be identified by corporate appraisal
here these are briefly described as follows.
1. STRENGTH: Strength is an internal capability of the organization which it can
use to gain strategic advantage over its competitors.
2. WEAKNESSES: A weakness is inherent limitation or constraints of the
organization which creates strategic disadvantage its position.
3. OPPOTUNITY: An opportunity is a favorable condition in the organization’s
environment which enables it to strengthen its position.
4. THREAT: - A threat is an unfavorable condition in the organization environment
which causes a risk for damage to the organization’s positions.
SWOT ANALYSIS FOR THE COMPANY:-
STRENGTH
Tried and tested.
Wider service network.
3. Easy availability of spares.
98
Low maintenance cost.
16-Bit ECM As Compared to 8-Bit in other cars.
EPS as Compare to hydraulic.
WEAKNESSES
Outdated looks.
Advertising or promotional schemes. 3. Low ground clearance.
OPPORTUNITY
Japanese Technology. 2. True' Value.
N2N (Fleet management)
Maruti insurance.
Wide sales and service network.
Offers many variants in segment B with price difference of 3500/7. Lower
price car for every segment.
THREATS
Santro's aggressive marketing.
Hyundai's new offering Xing.
Other car companies have also started offering variants in almost all the segment
Inadequate supply, which means loss of customers.
99
RECOMMENDATIONS
100
RECOMMENDATIONS
Maruti should come out with cars that are attractive and appeals to the masses.
The Maruti 800 with a 5-speed transmission was a very impressive car in
terms of economy as well as drive comfort, customers feel that the 800 model
should again be launched with an overdrive 5th gear.
The ground clearance of the cars especially Zen should be increased.
The back seat divider should not be there due to uncomfortable sitting position
due to it.
Supply should meet demand of the car; this is due to long waiting period in
most of the air-conditioned models.
The boot space of the car can be increased, especially in the Zen.
Dealers should deliver the vehicle on the day it has been promised.
Frequency of advertisements should be increased.
A brand ambassador can create hype in the customers mind.
Maruti must focus on retaining its customers and the True Value is a good
step towards attaining it.
In the end one can say that a good marketing mix is all that is needed to sell the Maruti
vehicles because they are still the best on the Indian road and definitely Maruti has got
some advantages over its rival which are hard to beat.
101
BIBLIOGRAPHY
102
BIBLIOGRAPHY
WEBSITE
www.maruti.com
www.marutiudyog.com
www.google.com
BOOKS:
Marketing Management (Kotler Philip)
Marketing Management (Saxena Rajan)
Foundation of Advertising Theory & Practice
(Chunawala.S.A / Sethia K.C.)
Fundamental of Marketing (Etzel Machel / Walker Bruce. J.)
Marketing management (Ramaswamy / Namakumari)
Research Methodology (C.R. kothari)
SOURCES:
Auto India
Top Gear
Advertising and Marketing
Annual Report of Maruti
103
APPENDIX
104
QUESTIONNAIRE
1. Which car have you purchased? _____________________
2. What was the purchase mode?
a) Cash
b) Finance, which company
ICICI STANDCHART
HDFC CITI BANK
ABN-AMRO ANY OTHER __________
3. This is your:
a) First car, you had a two wheeler earlier
b) First car, but you never had a two wheeler earlier
c) Replacement car (if yes, please specify the previous car and the model)
____________
d) Additional car
4. This car primarily would be driven by _____________________
5. You choose this brand because :
Please rank in order of importance (1 being most important)
Price [ ]
Schemes [ ]
105
Mileage [ ]
Resale value [ ]
Looks [ ]
After sales services [ ]
Reference [ ]
Advertisement [ ]
Features [ ]
Brand image [ ]
Repeat purchase [ ]
6. Which are the three brand (companies) that come to your mind when you think
of a car?
a) __________________
b) __________________
c) __________________
7. Which two TV car commercials (Ads) can you recall right now?
a) _______________________________________
b) _______________________________________
8. What were the sources of information when you purchase the car?
Sports channels
Star sports ESPN
Ten sports
106
Any other ____________________
News channels
Aaj Tak
Zee news
Star News
Any other __________________
Entertainment channels
Star
Zee
Any other ____________________
News papers
Times of India Hindustan Times
Economic Times Amar Ujala
Bainik Bhaskar Navbharat Times
Any other _____________________
Magazines
Business World Overdrive
India Today Outlook
Auto car India Business Today
Any other _________________________
107
9. Are there any suggestions that you want the company to implement?
Thank you for your kind cooperation
Name ___________________________________
Profession ___________________________________
Age ___________________________________
Contact No. ___________________________________
108