HD128S+EN+Manual

8/10/2019 HD128S+EN+Manual

1/46

HD-128S

H.264 Network

Digital Video Recorder

User Manual


2/46

HD-128S H.264 Netw o rk Digit al Vid eo Reco rd er

1

1 Product introduction . 3

1.1 Product summary .. 3

1.2 Technical data .. 3

2 Structure introduction .. 4

2.1 Panel introduction . 4

2.2 Connection port . 52.3 Remote control .. 6

2.4 Video system . 7

3 Operation System introduction . . 8

3.1 Start/Stop DVR . . 8

3.2 Preview .. . 8

3.3 Menu introduction . 93.3.1 Enter into menu . 9

3.3.2 Menu component ... 9

3.3.3 Exit menu .. 11

3.4 Main menu introduction . 11

3.5 Video playback 11

3.5.1 Files searching . 12

3.5.2 Searching result . .. 13

3.5.3 Playback tool control .. . 14

3.6 Manual record . 15

3.7 PTZ control .. 16

3.8 Menu . 17

3.8.1 Management tools ... 17

3.8.1.1 HDD management ... 173.8.1.2 Users management . 18

3.8.1.3 Restore default . 19

Content


3/46


2

3.8.1.4 Software undate ... 19

3.8.1.5 Time setup 20

3.8.1.6 Version information .. 20

3.8.2 System setup 203.8.2.1 System configuration ... 21

3.8.2.2 Images setup 23

3.8.2.3 Record protection . 25

3.8.2.4 PTZ setup . . 26

3.8.2.5 Video detection . 28

3.9 Manual Record . ..29

3.10 Record and playback 29

3.11 LOG information .. ..29

3.12 Network setup ...30

3.13 Record setup .....32

3.14 Close the system .. 33

Client software manual . . 34

1.1 The main page of the video monitoring . .. 351.2 Data rate option . . 36

1.3 PTZ control . . 36

1.4 Advanced setup box ... 36

1.5 Talkback control . . 37

1.6 Configuration .. 38

1.6.1 Sever parameter . 381.6.2 Channel parameter setup . .39

1.6.3 Users parameter information . 40

1.6.4 Others 41

1.7 Remote playback 42

How to update software 43

1.1 How to use U disk update software in the machine ..43

1.2 How to update the software on the network .. 43


4/46


3

Product introduction

1.1 Product summary

This equipment is a digital monitor and control product which

is specially designed for security fields, it adopt standalone processor

and standalone operation system, combining all kinds of latest

technology in the IT field, such as video and audio

compression/decompression, large capacity HDD recordin, TCP/IP

network technology, Code solidified in FLASH,all of these make the

system be steadier.The equipment including digital video&audio

recording(DVR) and digital video&audio server(DVS) functions both

independent working local,and connected internet be a strongsecurity survellance net. Applied security and protection to bank,

telecommunications,electronics, justice,traffic, subdistrict, factory,

warehouse, water conservancy facilities and other fields,and

department, etc.

1.2 Technical data! Operation system Embeded Linux operation system! System resources 4 channel CIF real time recording and

network transmission at one time,1 channel or 4 channel CIF

playback and 16 channel CIF/QCIF sub-bitstreams

! Operation surface: Graphical user interface,supportmouse,keyboard on the panel and remote

! Vedio standard PAL NTSC

1


5/46


4

! Video compression H.264! Audio compression ADPCM! Record way Manual Time fixed Alarm Motion detection

! Record search Time search Event search channel search LOGsearch! Backup way Network backup USB backup SATA burn! Video input 4 channel BNC! Video output 1 channel BNC ! 1 channel VGA output! Audio input 1 channel BNC! Audio output 1 channel BNC! Netvoice 1 channel netvoice! Monitor resolution PAL:720x576 " D1# ,NTSC:720x480 " D1# ! Playback resolution PAL:352x288 " CIF # ,NTSC:352x240 " CIF #! Images control 6 levels option

! Motion detection Support each single channel detection area (16

$ 16)and can setup multi-levels sensitivity

! Images show 1 4 channels show! Record speed PAL:25fps(adjustable) NTSC:30fps(adjustable)! Video storage HDD,Network! Mobile standard Standard RTSP 3G mobile phone monitoring.! Local playback 1 or 4 channel playback at one time! PTZ Control RS485! HDD port 1 SATA port (1500GB)! Network port RJ45 10M/100M auto Ethernet port! USB port 1 USB2.0 high speed port % 1 USB1.1 port! Power supply 12V 4A

Structure introduction2


6/46


5

2.1 Panel introduction

2.2 Connection port

1. MOTION LED 9. DOWN

2. LINK LED 10. RECROD

3. REC LED 11. PLAY

4. RUN LED 12. MENU

5. IR REMOTE WINDOW 13. ESC

6. LEFT 14. POWER

7. RIGHT 15. ENTER

8. UP

1. VIDEO IN 7. USB2.0 PORT

2. VIDEO OUT 8. USB1.1 PORT

3. TALKBACK INPUT 9. VGA PORT

4. AUDIO IN 10.RS485 PORT

5. AUDIO OUT 11. POWER PORT

6. NETWORK PORT 12. IR IN

25

11 123

13 15

97 84

10

146

1 3 4

2 5 8 7 11

126

10

9


7/46


6

2.3 Remote control1 POWER ON/OFF (Can not be used )

2 DIGITS,1---4 is also

CHANNEL NUMBER

3 All Area Selected (MotionDetect)

4 Backward, Forward,

Previous, Next

5 AUDIO MUTE

6 RETURN

7 MENU

8 UP, DOWN, LEFT,

RIGHT, ENTER

9 Channel 1-4

10 Aperture FOCUS

11 DEV:Press ! DEV" key,then input the DVR device

number,press ENTER " to

save the setup.Then it "svalid to control the DVR.

12 QUAD

13 PTZ14 Play,F rame ,Pause, Stop

15 RECORD

16 Volume Adjustment

17 ESC

18 Auto matic lens open or

close19 LENS ZOOM

2

8

1 11

16

13

15

17

14

12

18

19

3

10

9

7

6

5

4


8/46


7

1. Open remote control "s battery lid;

2. Pack into 2pcs AA batteries,make sure "+" and"-" ;

3. Close the battery lid.

2.3.2 Remote control corresponding number operation

Press ! DEV " key, then input the DVR device number

(acquiescent device number is #255 $,into management tool->modify

in systems paramet # ,the device number MAX 255. Input three-digit

device number, add 0 in front if there is no three-digit, press ! ENTER "

key.According remote control function key to operate standalone

DVR after finished corresponding number.

2.3.3 Remote turn on

The state of divice is pitched on by remote control,keep pressing

! POWER " key and close device into standby state.

The state of divice is not pitched on by remote control,

& POWER ' key , Can not be used.

2.3.4 Remote control stop operating

The state of divice is pitched on by remote control,press & DEV '

key,the remote control stop operating in standalone DVR control.

2.3.5 Remote control exceptional checking

Battery "s "+" and "-"

Battery "s power whether empty


9/46


8

2.4 Video System

Setup the video system on the video system switch of the

equipment mainboardPAL ( NTSC (

Operation System introduction

3.1 Start/Stop DVR

Please confirm that the alternating current is matched with the

DVR"s requirements. And make sure that the underground line is

connected.When the power is connected ! the DVR will turn the

& POWER ' LED to green color,after entering the system,the RUN

LED flashing on the panel is the normal condition.Long-press the

" Note: The remote control on the & POWER ' key to not be used as soft-switching

machine keys. #

3.2 Preview

When the device is startup normally, it will go to the previewing

picture.

On the page of previewing, you can see the data,time and

3


10/46


9

channel name.

Press the channel button or click the mouse can change the

channel directly and preview the single-channel screen.Then press

the #QUAD $ key or left-click the mouse to return to 4 channels

previewing.

3.3 Menu introduction3.3.1 Enter into menu

Press & MENU ' key to enter into the main menu interface.Press

& PLAY ' key to enter into the playback interface.

Press & REC ' key to enter into the manual operation

interface.Press & PTZ ' key to enter into the PTZ control interface.

3.3.2 Menu component

The menu component unit mainly has the following kinds:

" 1# Reelection Frame: Provide 2 choices, #%$ indicates valid

and #&$ indicates invalid, use & ENTER ' or & ' ' ,& ( ' to switch.

For example: #Channel choose $ and #Record type $

reelection frame on the files search interface.

" 2# Selection Frame: Choose the targeted content from the

bottom list of the system. Use & ' ' , & ( ' or left-click to

choose the item.


11/46


10

For example, there is #storage equipment $ selection frame

on the files search interface.

" 3# List Frame: The search result will display in the list

frame.Use & ' ' , & ( ' which provides in the chosen list to

choose one item.

For example,press & ENTER ' or left-click to play the video

recording document.Right-click to select or cancel the

video recording document in order to backup the

document.

" 4# Edit frame: Inputting targeted item by the editing frame.

For example: Input digits,English words,Chinese,etc on the

#equipment name $ eidit frame

a) Change input type by & FN ' or left-click the

# $,including digits,English words, punctuation marks

and Chinese input way.

b) After confirming the cursor position on the edit frame by

the panel keyboard or & ) ' & * '! press #ENTER $ or

left-click ! the keyboard will appear,then choose the

targeted characters by the direction keys or left-click.

c) Press & SHIFT ' or left-click to delete the characters

which are in the front of the cursor position.

d) Press & MENU ' or & ESC ' key to exit edit status.


12/46


11

" 5# Button: For the implementation of a specific function or set

into the second-level menu,press & ENTER ' or left-click to

enter.

3.3.3 Exit menu

Press & MENU ' ,& ESC ' or left-click to exit menu mode and switch

to multi-screens preview mode.

Right-click to return to the last menu.

3.4 Main menu introduction

Press & MENU ' key or the right mouse button to pop-up the main menu,main menu consists of the following three components:

Preview mode In the menu column,you can select thecorresponding screen preview mode.

Shortcut menu In the menu column, respectively have: video

playback, manual recording, shortcut menu of PTZ control, you

can directly emter the corresponding menu pages. Main menu Click to enter in to it,there are management tools,

system setup,LOG search and system closing interfaceand so on.

3.5 Video playback

Click the #video playback $ on the main menu to enter into the files

search interface.

3.5.1 Files search


13/46


12

Select channel : Select the target channel you want to search,

click the check box to choose.

Video type Select the video type which needs to search.

"%"means to be checked; " &" means not to be selected.

Time slice setup input the start time and end time of the

requiredvideoon the edit frame.

Storage equipment in the selection box select the target backup

storage device.

Files searching button: after finishing to setup the above

searching conditions,click the button,the system will start

to search the related video files and enter into the

searching result interface.

Note if there are more than 4000 video files can

meet the searching conditions,the system will

only show the latest 4000 files.If you want to

find the updated files,please revise the

searching conditions.

Time playback playback the video files according to the setup

start and end time " Don't differentiate video type.

Playback tools control,please refer to 3.5.3.

Time backup Backup the video files to the pointed storage

equipment according to the setup start and end time.


14/46


13

3.5.2 Searching result

After setup all the searching conditions,click the #files

searching $button to enter into the searching result interface.

Playback video files locate the targeted file on the list frame by

up/down key or moving the mouse.Click the & ENTER '

or left-click to play the file.

Page turning the searching files will show by page,click Page

Up Page Down keys or input the targeted page,then

press the skip button to turn the pages,you can also turn

the pages by the middle button of the mouse.

Backup locate the targeted file on the list frame by up/down key

or moving the mouse ! then select the & FN ' or right click

the file ! and select the targeted storage equipment on

the storage equipment frame,then press the backup

button,the selected video file will be backed-up in the

targeted storage equipment.

Cancel button return to the last level menu.

3.5.3 Playback tool controlChoose files playback or time playback,will enter into the video


15/46


14

playback interface.

Playback Toolbar ( playback toolbar will appear at the bottom of

the playback interface,right-click to hide or show the

toolbar.When multi screen playback at one time,after

hiding the toolbar,then left-click to zoom or narrow the

video on the related channel.

Stop playing Click ! system will stop playing and return to

the playback interface.

Pause/Play Click to pause playing ! click to go on

playing )

Single frame playback when on the pause mode ! click to

setup the single play ! when click one time ,it will

forward a frame.

Slow playback Click button to slow the playback,click one

more time can setup the slow times.

Fast playback Click button to fast the playback,click one

more time can setup the fast times.

Last slice/next slice click or ! when click last slice or

next slice one time,then the playback progress will

forward or backward 10% )

Close/Open voice click or to close or open the


16/46


15

voice of the playback files.

Playback status information it shows play speed,play

progress,played time and total video files time on the

right of the playback toolbar.

Exit play Click #ESC $ or to exit playback screen any

time.when all the files play over,it will exit playback

screen automatically.

3.6 Manual record

Click the manual record on the main menu to enter into the setup

interface.

Press & REC ' or click manual record on the main menu to enter

into the setup interface.

Manual record interface introduction

Manual record operation interface is made of the following parts:

Channel number:it "s corresponding with the video channel )

Channel Status indicates the record status on the

corresponding channel,when the satus led is green # $,

it says unopen state of the video, the satus led is red

" ",it says open state of the video;When there is a coil

around the status led # $,# $ says the corresponding


17/46


16

channel open the network video transmission.When the

system is on recording status " Regardless of video

type #! # $ will appear at the left corner of the channel

preview screen,it says it "s recording now.

All open/All stop button click the button to stop or open the

video setup of all channels.

Return button click return button to return to the manual

recordinginterface and return to the main menu.

Note Manual starting video, only through the manual to stop,

or video will continue all the time.

3.7 PTZ Control

Click PTZ control on the main menu to enter into the setp

interface.

The main operation of the PTZ control are as following:direction

control, horizontal scan,Zoom control,adjust the focal length, adjust

aperture, PTZ speed.

After switching the page,the preset points can be

invoked;Start/stop automatically cruise; Sheffield control; Lighting

control;Auxiliary equipment control.

Note:the invoked preset points must be setted-up well,


18/46


17

cruising paith setup method please refer to 3.8.2.8 PTZ setup.

One of the cruise path number is less than 2 digits, need to add

! 0" in the front of the corresponding cruise path number up to 2

digits.

3.8 Menu

Click #Menu $ to enter into the main menu interface,the first levelmenu is including:management tools,system setup,LOG

search,close the system.

3.8.1 Management toolsIncluding HDD management,users mansgement, Restore default,

Clear alarm, Software undate,Time setup,Version information.

3.8.1.1 HDD management

SATA indicates the current system HDD information, #%$

indicates HDD tested successfully % #X$ indicates without

HDD information.

HDD format Choose the targeted disk drives on the HDD

selection frame, can view the corresponding information,

click "format" button to appear confirmation page, click on

the "ok" button to begin, HDD starts formatting, after HDD

formatting completed, HDD can be used normally.

Note You need stop all the record before you format the disk.


19/46


18

3.8.1.2 Users management

Create users add, remove users and modify user

information. (except the Admin,any other users are not entitled

to setup the privileges of other users)

Creat new user

Enter into #users management $ operation interface ! click#add $

button to enter into users add interface

1 Input new user name

Input new user name on the users name edit frame " such

as:user # .

Note the inputing method please refer to 3.3.2 " 4# .

2 setup new users # password

Choose #setup password $ button on the #users add

interface $ ! input the new password on the password setup

interfac ! the password is within 6 digits.

3 Setup the permissions of the new users

Setup the operation permissions of the new users on the

"users add" interface, select from the corresponding reelection

frame, #%$ indicates users can use the permissions, #&$ indicates

the user cannot use the permissions.

4 Save the setup information of the new users


20/46


19

Click #Enter $ button, the setup information of the new users

Will be saved,if you click #cancel $,it won "t be saved.

Revise users

Enter into the #users management $ interface ! right-click or

press #ENTER $ on the panel in the users list,and click #revise $ button

and enter into the #Revise users $ interface to revice the users "

information.

Note Admin can revise the others #permissions.

Cancel the users

Enter into the #users management $ interface ! right-click or

press #ENTER $ on the panel in the users list to choose the targeted

user,then click #cancel $ to cancel the user.

3.8.1.3 Restore default

Set the system configuration parameters as the default, after

restore recovery, the system will restart automatically.

3.8.1.4 Software update

Choose #Software update $ on the management tools interface to

enter into the operation interface.

Choose the targeted update on the update selection frame,then

choose the update modes on the update ways frame: FTP and USB.

USB update Copy the required update files to the USB root


21/46


20

catalogue, insert USB, and then click #Enter $ to update

the system.

FTP update Put the required update files to the FTP root

catalogue,setup the IP address as the pointed

one,then press #Enter $ to update the system.

After finishing update,the system will restart automatically.

Note the main board update name should be

mainboard.bin $ When the system is updating,do not cut

of the power supply, to invoid causing equipment

malfunction.

3.8.1.5 Time setup

Enter the system time page, input the correct date and time in

the #Date $, #Time $ frame,then press & ESC ' to save or press & ESC '

to cancel.

3.8.1.6 Version information

Check equipment names, types, the version number and the

relevant information.

3.8.2 System setup

Choose the #System setup $ to enter into the sub-menu on the

main menu interface.

3.8.2.1 System configuration


22/46


21

Choose "system configuration" into setup interface on the system

setup interface.

Equipment number When using remote to control the

equipment operation, it is through the device to control

and communication, remote control must be

coressponding with and the equipment number to

realize the remote operation. The setup of the Remote

control ,Please refer to 2.3 remote introduction.

Equipment name Equipment name is normally definited as

the monitoring area name, when remote access,can

intuitivey find the visit point.The default equipment

name is #NetDVR $) The editing method,please refer to3.3.2 " 4# .

Equipment is full Choose "cover", when all the hard disk

recording inside the equipment is full, the system will

cover the earliest video information to achieve the

purpose to record in cycle.

Lock time by keypad When there is no operation within the

locked time by keypad, the system will cancel the

current unser automatically, need to login the system

again to operate.

Switch time Switching time means the cycle time cycles what


23/46


22

the single-channel preview shows.

Video system The equipment spport PAL and NTSC video

output.The default is #NTSC $.Setup method please refer

to 2.4 )

VGA resolution users can adjust the VGA redolution according

to the VGA monitor.

Menu transparency when the user access to the menu

interface, by adjusting the transparency of the menu,

can realize the transparency between preview screen

and the menu.

Language According to the user's demand, can setup menu

language types, can choose the simplified Chinese and

English.

Status Setup if the the preview screen shows the record ways,

status and the motion detection icons, when the markchange to #%$means showing status; when the markchange to #&$means non showing status;

Channel preview screen icon at the left corner:

# $ the system is recording(regardless of video type).

# $time fixed recording status.

# $manual recording status.

# $motion detection status.

# $motion detection recording.When finish the setuo of this page, click "Enter" button to save


24/46


23

the setup information and exit; Click "cancel" button, will not save the

setup information and exit.

3.8.2.2 Images setupChoose #Image setup $ to enter into the setup interface.

Channel choose Choose the targeted channel and click options

frame to choose.

Channel name In the edit box, users can edit channel name by

thenselves.The editing method,please refer to 3.3.2. " 4# .

Display name #%$ says display, #&$ says no display )Click#position $button ! enter into setup interface ! setupthrough the panel direction key or mouse dragging the

red channel name,after finishing setup,press #ENTER $ button or the right key of the mouse to save and exit !

#ESC $ key meas do not save and exit.

Display time ##%$ says display, #&$ says no display )Click#position $button ! enter into setup interface ! setupthrough the panel direction key or mouse dragging the

red channel name,after finishing setup,press #ENTER $ button or the right key of the mouse to save and exit !

#ESC $ key meas do not save and exit.

Image specification

Setup the brightness, contrast, hue andsaturation,use & ' '& ( ' key on the panel or mousedragging to adjust.

Use default Through click this button, can setup the image

parameter to system default values " Only limited to the

restored image parameter # .

Cover In the "cover" options,marks setup as " %" to activate the#area $ button, enter into cover area setup interface.

Setup cover area In the cover areas setup interface, the area


25/46


24

center displays a yellow box, that is the area setup box.

Area create: Move the yellow box to the start position of the

setup area through the panel direction key,press the

& FN ' button (switch the yellow box and red box) to

change it to the red box (red box is the effective cover

area); Then adjust the size by the direction key, the

minimum size of the area can be set to one small box,

the max size can set to 4 covered area. Left-click or

long pressing the mouse to select the area, after

finishing the setup ,press "ENTER" or click the middle

mouse button to exit and save, press "ESC" key means

not to save and exit.

Local clear: Move the yellow box to the required clearing area

(top left), press & FN ' button, it "s changed into black box

(eliminate area box), local is cleared. After finishing the

clearing , press & ENTER ' to save and exit.If press

& ESC ' ,the clearing setup will be invalid. Left-click or

long pressing the left mouse key to clear the area in the

red box, click the middle mouse key to exit and save.

All clear: press & MENU ' to clear all the covred area in the

channel.


26/46


25

Copy to: At the right selection frame of the copy to button,

choose the targeted channel,click the #Copy to $ button,system will apply the current channel setup

information to other targeted video channel.Note:the channel name can not be copied.

After this page setup is completed, click "Enter" button, save the

setup information and exit, Click "Cancel" button, the setup

information will not be saved and then exit.

3.8.2.3 Record protection

Choose the #record protection $ to enter into the setup interface.Choose channel choose the targeted channel,click the

selection frame to choose.

Week choose which day need to setup ! can setup separatedly %

# All$says all the dates.

Recording type and time slice In the four periods, each period

can set different types, fixed time record (red), motion

record (green), alarm record(yellow). " %"says enabled,

"&" says invalid. The time status will display in the

below, the whole plan of 0 to 24 hours.

Copy to At the right selection frame of the copy to button,choose

the targeted channel,click the #Copy to $ button,systemwill apply the current channel setup information to other

targeted video channel.


setup information and exit, Click "Cancel"button, the setup



27/46


26

3.8.2.4 PTZ setupChoose the #PTZ detection $ to enter into the setup interface.

Choose channel choose the targeted channel,click the


Speed: choose the rate which is matching connected PTZ.

Data bits: choose the data bits which is matching connected

PTZ.

Stop bits: choose the stop bits which is matching connected

PTZ.

Calibration: choose the calibration which is matching connected

PTZ.

Flow control: the chosen item should be the same with the

matching PTZ flow control setup.

Protocol type: the chosen item should be the same with the

matching PTZ protocol setup.

Decoders address: input the specified codec decoders address.

Setup Preset point: Preset point is to setup the camera position,

focus, zoom and lens in advance and memory them,and

use a numbers to remark the setup.

Add Preset point ( Input a preset point in the preset

points edit box, the range is 1-128, then through the

direction key to adjust camera to the targeted


28/46


27

position, after adjusting,the preset point will be

saved.

Delete preset point: input a preset point in the edit

control will delete the preset enter, click "delete".

Cruise path is in certain speed camera, the path

through more orderly, cruise, each cruise points

include preset and stay time, so the set consists of

cruise path, cruise, retention time and preset

parameters such as a cruising speed of setup, in

"Settings" interface can be setup the

corresponding information. Now a equipment

support 16 cruise path of setup.

Cruise path setup: cruise path is an path that the camera is

running with the certain speed, the path pass several

cruise points with serial number, each cruise point

include preset point and stay time, so the setup of the

cruise path includes cruise point, preset point,retention

time and cruise speed parameters setup. in "setup"

interface can set the corresponding information. Now

each equipment can

Tracking setup: tracking which is used to record an irregular


29/46


28

movement lines of the camera which is defined

inadvance, enter "Settings" can setup the tracking.

Copy to At the right selection frame of the copy to button,choosethe targeted channel,click the #Copy to $ button,systemwill apply the current channel setup information to other





3.8.2.5 Video detectionChoose the #video detection $ to enter into the setup interface.

Choose channel choose the targeted channel,click the


Type can choose motion detection and video lost.

Alarm output setup the specified number of alarm output

channel when the alarm input need to trigger.

Buzzer Whether need to trigger the buzzer to alrm or not. #%$

says open ! #&$ says invalid.

Time delaying After finishing the detection sigal,setup the

delaying time of the required items which need to deal

with.

Area setup motion detection area ! setup method,please refer to

3.8.2.3.

Sensitivity: choose the trigger motion detection sensitivity. If


30/46


29

choose "Don't test" ,then the above setup parametera are invalid.

Video Channel setup the specified number of video channel

when the alarm input need to trigger.

Copy to At the right selection frame of the copy to button,choose

the targeted channel,click the #Copy to $ button,systemwill apply the current channel setup information to other



setup information and exit, Click "Cancel"button, the setupinformation will not be saved and then exit.

3.9 Manual Record

Please refer to the 3.6 manual record.

3.10 Manual playback

Please refer to the 3.5 playback .

3.11 LOG information

Choose #LOG search $ to enter into the setup interface on themenu.

Main type choose the required searching LOG type on the

selection frame.

Time setup Input the view time slice in the editing frame,the

related LOG information will show in the bellowing LOG

list.Input the targeted page the page through the pages

frame, click "enter " to turn the pages, or rolling

alt-middle to turn the pages.


31/46


30

3.12 Network Setup

In the system setup interface, choose "network setup" and

enter into its setup interface,there are " Ethernet, PPPOE ,DDNS"configuration.

Ethernet configuration: in the network configuration interface,

choose "Ethernet configuration" into its setup interface.

Physical address: show the physical address.

Port number Port number must be more than or equal to 2000.

IP address The IP address must be only, it can not the same

with the segment of the host or have any other conflicts.

Subnet mask: use in the molecular segments.

The default gateway: realize the communication between the

different network, need to setup gateway address.

DNS address After the equipment use PPPoE agreement to

access network,, will get dynamic IP address.

DHCP Choose whether to enable DHCP automatic acquisition

IP.

http port IE browser port, the default port is 80.




PPPOE configuration: in the network configuration, choose


32/46


31

"PPPOE configuration" and enter into its setup

interface.

Start: "%" says start the PPPoE dial-up Internet protocol," & "

says can not start the PPPoE dial-up Internet protocol.

User name and password: in the edit box,input the user name

and password which is provided by ISP. Please refer to

3.3.2 (4).


setup information and exit, Click "Cancel" button, the setup


DDNS configuration: in the network configuration interface,

choose "DDNS configuration" into its setup interface.

Start: "%" says start the DNNS, " & " says will not start the

DNNS.

Service provider choose the corresponding service provider.

User name,password and domain in the editing frame, input

the user name,password and domain which apply from

the internet.Editing method,please refer to 3.3.2 " 4# .




3.13 Record Setup

In the system setup interface, choose "record setup" into its


33/46


32

setup interface.

Channel choose Choose the targeted channel which need to

setup, click selection frame to choose.

Streaming: choose streaming which need to setup, they are

"Mainstream" and "sub-stream "

Streaming types Choose the required video streaming type, "

video streaming " indicates when the system is

recording,it only encode the video;"Composite stream"

indicates when the system is recording,it can encode

both the video and audio;

Bit rate type: Users can setup "fixed bitrate" and "variable bit

rate", "fixed bitrate" says system encode the images

according to the rate setting and video frame

rate;"Variable bitrate," says system encode according to

the image quality and video frame rate,but the rate will

be adjusted by the system automatically according to

video scene.

Bit rate cap Users choose the encoding rate according to their

requirement. The higher the rate is, the better the image

quality is, but also occupy hard disk space more.

Video frames Users choose the video frames according to their


34/46


33

requirement. The higher the frames is, the more smooth

the image is, but also occupy hard disk space more.

Copy to At the right selection frame of the copy to button,choosethe targeted channel,click the #Copy to $ button,systemwill apply the current channel setup information to other





3.14 Close System

In the main menu interface, choose "close system" and enter into

the operation interface.Choose the corresponding operation items

on the selection box.

Cancellation of users: For the cancellation of the curretnt users.

After the cancellation, if you want to continue to use the

equipment, need to login system again.

Reboot: Restart the quipment, after confirmation,the equipment

will be restarted.

Close system: If you want close equipment,you should cut ofthe power supply.


35/46


34

Client software manual

When using the PC client soft,please setup as following:

1 .The IE setup: if you use it at the first time, and unable to load

control, need setup IE as following: tools % % Internet options

% % security - Internet % % User-defined level % % select ActiveX

and plugin for opening, finally click [Enter].

Login: open IE and input IP address which is setup by host

network in the address bar ( Factory default IP address is

http://192.168.1.23) , enter login page, the diagram as below. Enter

your user name and password, the user name and password is the

same with the mainframe, input the correct user information,then land

in successful.
http://192.168.1.23%29/http://192.168.1.23%29/


36/46


35

1.1 The main page of the video monitoring

After logging in,the main monitoring page is made of preview

window, PTZ control, preview mode, streaming selection, channelsopen, interphone open, configuration, playback, user cancellation. As

shown in figure 1-1.

Open the preview: in the preview window, left-click to select the

targeted channel (when channel box is red,it "s namely selected.),double-click the channel number in the channel open box, can be

open or close the video images which is corresponding with the

preview window, shows open,shows close.

Preview mode: click or double-click the

preview window screen to switch the single picture preview or more

pictures preview in the preview mode switch box,

& 1-1


37/46


36

1.2 Data rate option

This equipment support double stream, select the stream type of

video preview in streaming box.

1.3 PTZ Control

A PTZ direction control button, can control PTZ

operation direction via the up,down,left, right.

B The aperture button, can control PTZ aperture byincrease and decrease

C Focus button, can control PTZ focus by adjust tobe far and near.

D Variable times button, can control PTZ position bypull ing away and close.

1.4 Advanced setup box

When the preview window open video preview, this function is

activated. In the corresponding channel preview window, click the

right mouse button to open advanced setup dialog box:

Open/close voice: open or close the preview channel audio bythis button.

Screenshots: intercept the current video pictures and save them

as image format. Please refer to 1.5.5 for the directory

saving setup.

Record: open the remote recording of this channel video and

save it. Please refer to 1.5.5 for the directory savingsetup.

PTZ setup ( setup PTZ preset point, cruise path, track.Please


38/46


37

refer to 3.8.2.8 for the method of PTZ setup.

OSD setup ( setup OSD layer channels, time reality position, and

click the mouse to save.

The motion detection: Setup motion detection area: First, #%$ display the motion detecting area,choose "Add area"and hold the mouse drag on the screen ,then appears

white mesh shape line,that is motion detection

area;Choose "clear area", hold the the left mouse button

to drag on screen of the white mesh shape line

area,then the white mesh shape line is diappear,and the

motion detection area is canceld.Choose the

corresponding parameter on the sensitivity and output

delay box.

Screen adjusting : Setup the brightness, contrast, hue and

saturation of the images, left-click the mouse or drag to

adjust, exit and save automatically.

1.5 Talkback Control

Click to open voice and start speech intercom aggressively.


39/46


38

1.6 Configuration

1.6.1 Sever paramete

In the setup interface, setup the related parameters of the host.Asshown in figure 1-6-1. Set the same parameters as the host, setting

method and matters needing attention,please refer to the host system

configuration, system information, network operating instructions.

& 1-6-1


40/46


39

1.6.2 Channel parameter setup

In the setup interface, setup the related parameters of the

host.As shown in figure 1-6-2. Set the same parameters as the host,

setting method and matters needing attention,please refer to the hostsystem images setup, recording setup, PTZ setup operating

instructions.

& 1-6-2


41/46


40

1.6.4 Users parameter information

Setup the users information of the equipment.Set the same

parameters as the host, setting method and matters needing

attention,please refer to the host users management operating

instructions.

& 1-6-3


42/46


41

1.6.5 Others

In the setup interface, setup the related parameters of the

host.As shown in figure 1-5-5. Set the same parameters as the host,

setting method and matters needing attention,please refer to themanual record, date and time,HDD management,clear alarm,LOG

search,software update, restoring default setup operating

instructions.

Video and captured picture saving directory: setup the save path

of the video and captured picture.

& 1-6-4


43/46


42

1.7 Remote playback

Choose playback channel number, recording type, time conditionand click the search button, the left frame will display a list of search

results. Can flip or input page to jump to view video files (one page

display 20 files information and most support 4,000).

Files playback: choose the targeted files on the searching list

frame,double-click the file or click the #file playback $ button,start to

playback at the right playback window, the playback control is thesame as the host.

Time playback: click the " time playback" button, playback

window will start playing video file with the start time setup.

Files download: click the #files download $ button to select thetargeted file in the search list frame, after setting the saving path and

start to download the targeted file, the progress bar in the below will

display download progress status of the file.


44/46


43

How to update software

1.1 How to use U disk update software in the machine? If you want to update software in the machine, you should insert U

disk into the USB port, then setup as following: Menu

Tools Upgrade( Fig.1) OK (Fig.2)

Fig.1 (

Fig.2 (

Note: System cann "t upgrade when recording.

1.2 How to update the software on the network?

If you want to update the software on the network?

Open the IE Control Interface, then setup as following:

Configure others( Fig.1) Update( Fig.2) Browse (Download the file

when you will want to upgrade.) Start


45/46


44

Fig.1 :

Fig.2 :

Note:

A. You have to wait about 3 minutes when the system upgrading.

B. You cann "t cut power when system upgrading.


46/46


Changes may be made in this manual without obligation to

notify any person of such revisions or changes.

The company reserves the rights of final interpretation of the

manual.

Documents

HD128S+EN+Manual