HB-P527PUSH-AROUND AERIAL WORK PLATFORM

1-866-334-0756 // WWW.HYBRIDLIFTS.COM

This brochure is for illustrative purposes only and based on the latest information available at the time of printing. Hy-Brid Lifts reserves the right to make changes at any time, without notice, to specifications, standard and optional equipment. Hy-Brid Lifts™ is a trademark of Custom Equipment, Inc. ©2016 Custom Equipment, Inc. All rights reserved.

FEATURES & SPECIFICATIONS

HEIGHTS US METRICWorking Height 11.3 ft 3.4 mPlatform Height Max 5.3 ft 1.6 m Platform Height Min 20.3 in 51.5 cmGround Clearance 2.5 in 6.4 cmMEASUREMENTSOverall Length 41 in 104.1 cmOverall Width 26.6 in 67.6 cmStowed Height 63.6 in 161.5 cmPlatform Length 37 in 94 cmPlatform Width 22 in 55.9 cm

PERFORMANCEPlatform Capacity 500 lb 226.8 kg

Rated Occupancy 1 person 1 person Weight 575 lb 260.8 kgLift Speed Up/Down 9/12 sec 9/12 secPower Source 12V DC 12V DCTires Front/Rear 8/8 in 20.3/20.3 cm

FLOOR LOADINGMin Wheel Load 115 psi 792.9 kPaMax Wheel Load 215 psi 1482.4 kPaMin Machine Load 75.9 psf 3.7 kPaMax Machine Load 141.9 psf 6.8 kPa

HB-P527INCREASED WORK SITE SAFETYSturdy and easy to operate Hy-Brid Lifts are the safe and efficient alternative to ladders or scaffolding on a job site.

COMPACT DESIGNThe HB-P527 is 26.6 in (67.6 cm) wide and can easily maneuver through doors and onto standard personnel elevators.

MAINTENANCE FREEMaintenance free AGM Battery and easy access panels improve life cycle and cost of ownership.

LOW FLOOR LOADINGExtremely lightweight design makes the lift easy to push around and allows for use on delicate or sensitive surfaces.

USER-FRIENDLY DESIGNLow step height and full swing gate provide easy access to platform and reduce chances of knee and neck strain.

ROBUST RAIL SYSTEMUnique rail technology provides greater durability and resilience against wear on the job site.

OVERSIZED 1 IN (2.54 CM) PINSRobust scissor stack requires no greasing and oversized pins reduce scissor sway.

INTEGRATED HYDRAULIC SYSTEMPump and cylinder system are integrated providing less potential leak points.

TOTAL-LOCK REAR CASTERSPrevents unwanted wheel and caster rotation.

AUTO-LOCK BRAKES ON FRONT TIRESPrevents machine surfing during use.

NON-MARKING WHEELSProtect sensitive floors and prevent surface scuffs on job site.

05/16 Part No. L01-11

HB-P827PUSH-AROUND AERIAL WORK PLATFORM

1-866-334-0756 // WWW.HYBRIDLIFTS.COM

This brochure is for illustrative purposes only and based on the latest information available at the time of printing. Hy-Brid Lifts reserves the right to make changes at any time, without notice, to specifications, standard and optional equipment. Hy-Brid Lifts™ is a trademark of Custom Equipment, Inc. ©2016 Custom Equipment, Inc. All rights reserved.

FEATURES & SPECIFICATIONS

HB-P827

HEIGHTS US METRICWorking Height 14 ft 4.3 mPlatform Height Max 8 ft 2.4 mPlatform Height Min 25.3 in 64.3 cmGround Clearance 1.6 in 4.1 cm

MEASUREMENTSOverall Length 43 in 109.2 cmOverall Width 27.6 in 70.1 cmStowed Height 68.6 in 174.2 cmPlatform Length 37 in 94 cmPlatform Width 22 in 55.9 cm

PERFORMANCEPlatform Capacity 550 lb 249.5 kg

Rated Occupancy 1 person 1 person Weight 793 lb 359.7 kgLift Speed Up/Down 16/16 sec 16/16 secPower Source 12V DC 12V DCTires Front/Rear 8/8 in 20.3/ 20.3 cm

FLOOR LOADINGMin Wheel Load 210.6 psi 1452 kPaMax Wheel Load 356.7 psi 2459.4 kPaMin Machine Load 118.1 psf 5.7 kPaMax Machine Load 200 psf 9.6 kPa

INCREASED WORK SITE SAFETYSturdy and easy to operate Hy-Brid Lifts are the safe and efficient alternative to ladders or scaffolding on a job site.

COMPACT DESIGNThe HB-P827 is 27.6 in (70.1 cm) wide and can easily maneuver through doors and onto standard personnel elevators.

MAINTENANCE FREEMaintenance free AGM Battery and easy access panels improve life cycle and cost of ownership.

LOW FLOOR LOADINGExtremely lightweight design makes the lift easy to push around and allows for use on delicate or sensitive surfaces.

USER-FRIENDLY DESIGNLow step height and full swing gate provide easy access to platform and reduce chances of knee and neck strain.

ROBUST RAIL SYSTEMUnique rail technology provides greater durability and resilience against wear on the job site.

OVERSIZED 1.25 IN (3.18 CM) PINSRobust scissor stack requires no greasing and oversized pins reduce scissor sway.

TOTAL-LOCK REAR CASTERSPrevents unwanted wheel and caster rotation.

AUTO-LOCK BRAKES ON FRONT TIRESPrevents machine surfing during use.

NON-MARKING WHEELSProtect sensitive floors and prevent surface scuffs on job site.

05/16 Part No. L01-12

HB-P1027PUSH-AROUND AERIAL WORK PLATFORM

1-866-334-0756 // WWW.HYBRIDLIFTS.COM

This brochure is for illustrative purposes only and based on the latest information available at the time of printing. Hy-Brid Lifts reserves the right to make changes at any time, without notice, to specifications, standard and optional equipment. Hy-Brid Lifts™ is a trademark of Custom Equipment, Inc. ©2016 Custom Equipment, Inc. All rights reserved.

FEATURES & SPECIFICATIONS

HB-P1027

HEIGHTS US METRICWorking Height 15.8 ft 4.8 mPlatform Height Max 9.8 ft 3 m Platform Height Min 27.8 in 70.6 cmGround Clearance 1.6 in 4.1 cm

MEASUREMENTSOverall Length 43 in 109.2 cmOverall Width 27.6 in 70.1 cmStowed Height 71.1 in 180.6 cmPlatform Length 37 in 94 cmPlatform Width 22 in 55.9 cm

PERFORMANCEPlatform Capacity 550 lb 249.5 kg

Rated Occupancy 1 person 1 person Weight 870.5 lb 394.9 kgLift Speed Up/Down 16/14 sec 16/14 secPower Source 12V DC 12V DCTires Front/Rear 8/8 in 20.3/20.3 cm

FLOOR LOADINGMin Wheel Load 250.3 psi 1725.8 kPaMax Wheel Load 408.5 psi 2816.5 kPaMin Machine Load 129.6 psf 6.2 kPaMax Machine Load 211.5 psf 10.1 kPa

INCREASED WORK SITE SAFETYSturdy and easy to operate Hy-Brid Lifts are the safe and efficient alternative to ladders or scaffolding on a job site.

COMPACT DESIGNThe HB-P1027 is 27.6 in (70.1 cm) wide and can easily maneuver through doors and onto standard personnel elevators.

MAINTENANCE FREEMaintenance free AGM Battery and easy access panels improve life cycle and cost of ownership.

LOW FLOOR LOADINGExtremely lightweight design makes the lift easy to push around and allows for use on delicate or sensitive surfaces.

USER-FRIENDLY DESIGNLow step height and full swing gate provide easy access to platform and reduce chances of knee and neck strain.

ROBUST RAIL SYSTEMUnique rail technology provides greater durability and resilience against wear on the job site.

OVERSIZED 1.25 IN (3.18 CM) PINSRobust scissor stack requires no greasing and oversized pins reduce scissor sway.

TOTAL-LOCK REAR CASTERSPrevents unwanted wheel and caster rotation.

AUTO-LOCK BRAKES ON FRONT TIRESPrevents machine surfing during use.

NON-MARKING WHEELSProtect sensitive floors and prevent surface scuffs on job site.

05/16 Part No. L01-13