Upload
thomas-english
View
218
Download
0
Embed Size (px)
Citation preview
8/10/2019 HazlipJohn-BentleyDataAcquisition
1/59
BENTLEY DATA ACQUISITIONBENTLEY DATA ACQUISITION
8/10/2019 HazlipJohn-BentleyDataAcquisition
2/59
DATA ACQUISITIONers on equ remen s
MicroStation V8i/GEOPAK SS2 (.566) or
Power GEOPAK SS2 (.566)
o e: ers on . s a en ey up a e o vers on .(08.11.07.566)
or
8/10/2019 HazlipJohn-BentleyDataAcquisition
3/59
ISSUES AND LIMITATIONS . .
When processing an OBS in D.A., Geodesy is NOT beingapplied
D.A. SS2 does not process OBS Taping, SOE, orEccentricity
Tolerances and Error Estimates must be set in aconfiguration variable or defaults will be used. Thisincludes turning on and off the Least Squares
Adjustment.
Use the latest FDOT seed file
8/10/2019 HazlipJohn-BentleyDataAcquisition
4/59
3D vs. 2D
Although a 2D seed file can be used for some purposes,like creating the 2D TOPORD.dgn survey deliverable,
enerall for surve in ur oses a 3D seed file should beused.
If a surface is to be created a 3D seed file is necessar
The future is 3D deliverables
8/10/2019 HazlipJohn-BentleyDataAcquisition
5/59
STYLE FILES ARE PRESET
A Style file is the equivalent of a feature table
For Roadway Design the style file is fdote_10.xml or fdot_ss2.xml
For Right of Way Mapping the style file is fdote_10rw orfdot_ss2rw.xml
In FDOT software the style files are automatically set bythe configuration.
Remember this Key-in: dataacquisition redraw
8/10/2019 HazlipJohn-BentleyDataAcquisition
6/59
8/10/2019 HazlipJohn-BentleyDataAcquisition
7/59
ACTIVATE DATA ACQUISITION
8/10/2019 HazlipJohn-BentleyDataAcquisition
8/59
ACTIVATE DATA ACQUISITION
8/10/2019 HazlipJohn-BentleyDataAcquisition
9/59
The D.A. dialogue box and the D.A details dialogue boxwill open and can be docked
8/10/2019 HazlipJohn-BentleyDataAcquisition
10/59
FDOT SEED FILES CONTAIN DESIGN. .
8/10/2019 HazlipJohn-BentleyDataAcquisition
11/59
8/10/2019 HazlipJohn-BentleyDataAcquisition
12/59
SETTING UNITS FOR
8/10/2019 HazlipJohn-BentleyDataAcquisition
13/59
8/10/2019 HazlipJohn-BentleyDataAcquisition
14/59
8/10/2019 HazlipJohn-BentleyDataAcquisition
15/59
Drag and Drop the XYZ File
8/10/2019 HazlipJohn-BentleyDataAcquisition
16/59
Chains are extracted from the OBS with thesame name as e e
8/10/2019 HazlipJohn-BentleyDataAcquisition
17/59
e oo s
Continue dragging and dropping segments into D.A. untilall segments have been added to the field book
The field book can be renamed from Default 1 to anappropriate name
Additional field books can be added by right clicking andselecting New
Data can be added to the New field book by right clickingon that field book.
8/10/2019 HazlipJohn-BentleyDataAcquisition
18/59
POINT SCALES ARE SET BY THE FDOT
Cells will be brought in at 5 times their original scale(1=50).
Line styles for linear features will be brought in at a 1.00scale factor.
To view the line styles at a desired scale from the Modelspull down, click on Model Properties and set the line stylescale to the desired scale.
8/10/2019 HazlipJohn-BentleyDataAcquisition
19/59
LINE STYLE SCALES CAN BE VISUALIZED
8/10/2019 HazlipJohn-BentleyDataAcquisition
20/59
CHAIN EDITING
Data Acquisition has tools for building and editing linearfeatures (chains).
Editing the OBS to add or edit collected chains is also anoption and provides legacy data that can be used acrossmulti le latforms, includin CAiCE and Civil 3D.
For Data Acquisition it is a simple process to delete thefield book and re-drag and drop the XYZ segments tovisualize the updated chains
8/10/2019 HazlipJohn-BentleyDataAcquisition
21/59
Hovering over the chain will give you information about
.
8/10/2019 HazlipJohn-BentleyDataAcquisition
22/59
Right clicking on the chain will give access to chain
8/10/2019 HazlipJohn-BentleyDataAcquisition
23/59
Chain editing functionality can also be accessed from the
. .
8/10/2019 HazlipJohn-BentleyDataAcquisition
24/59
8/10/2019 HazlipJohn-BentleyDataAcquisition
25/59
Selecting Manage Point List will allow changes in the
8/10/2019 HazlipJohn-BentleyDataAcquisition
26/59
Features that do not match the Style File will show up in
. .
8/10/2019 HazlipJohn-BentleyDataAcquisition
27/59
Surfaces are created automatically.
The All Field Books surface is created by default. Thissurface is made up of all data in the database.
Checking the appropriate box in the Surface tree willshow the graphics for that attribute.
Right clicking on the Surface will allow the user to export
the surface to permanent graphics or a TIN file.
8/10/2019 HazlipJohn-BentleyDataAcquisition
28/59
rea ng pec c ur aces
Right Clicking on Surfaces in the DA tree will allow theuser to create a new surface
Creating a surface from a selection set will allow users tocreate a surface in a specific area from graphical data inthe current view
Select the desired data, right click on Surfaces andcreate a surface from the field book selection set
DTM point attributes can be edited by using chain editingfunctionalit
8/10/2019 HazlipJohn-BentleyDataAcquisition
29/59
8/10/2019 HazlipJohn-BentleyDataAcquisition
30/59
Rename the surface, give a side length and change the
8/10/2019 HazlipJohn-BentleyDataAcquisition
31/59
The DTM Attribute in the chain point list dialogue
.
8/10/2019 HazlipJohn-BentleyDataAcquisition
32/59
Create as many surfaces as is needed.
8/10/2019 HazlipJohn-BentleyDataAcquisition
33/59
8/10/2019 HazlipJohn-BentleyDataAcquisition
34/59
rea ng ur aces rom
At the request of the Missouri DOT, Bentley has come upwith a specific workflow for creating a surface directlyfrom a classified LIDAR LAS file usin Data Ac uisition
In the D.A. tree, right click on Surfaces
Import External Surface
mpor
8/10/2019 HazlipJohn-BentleyDataAcquisition
35/59
Create a new surface by Importing a LIDAR LAS file
8/10/2019 HazlipJohn-BentleyDataAcquisition
36/59
Choose the LAS file to import
8/10/2019 HazlipJohn-BentleyDataAcquisition
37/59
8/10/2019 HazlipJohn-BentleyDataAcquisition
38/59
rea ng ur aces rom
What is the Z Tolerance ???
Bentley defines the Z Tolerance as being theacceptable vertical error for a project with vertical errorbeing the vertical distance @ 95% confidence level of themaximum oint s acin
NSSDA on Vertical Accuracy: If vertical error is normallydistributed, the factor 1.9600 is applied to compute linear
error at the 95% confidence level
Therefore NSSDA defines Vertical Accurac = 1.9600 xRoot Mean Square of the Elevation (RMSE)
8/10/2019 HazlipJohn-BentleyDataAcquisition
39/59
8/10/2019 HazlipJohn-BentleyDataAcquisition
40/59
8/10/2019 HazlipJohn-BentleyDataAcquisition
41/59
Choose the LAS file to import, choose classifications, set
,
8/10/2019 HazlipJohn-BentleyDataAcquisition
42/59
Point features are reduced by the filter. Click the
.
8/10/2019 HazlipJohn-BentleyDataAcquisition
43/59
8/10/2019 HazlipJohn-BentleyDataAcquisition
44/59
CREATING FDOT SURVEY
Creatin the GDTMRD file can be done usin GEOPAKand the TIN file created from D.A.
Creatin the DREXRD, TOPORD, and UTEXRD files caneasily be done by visualizing the graphics using thelevel display filters
Individual features can be visualized using the featurestyles in the D.A. tree
Check to visualize, uncheck to turn off visualization ofgroups or individual features
8/10/2019 HazlipJohn-BentleyDataAcquisition
45/59
CREATING FDOT SURVEY
To visualize the DREXRD, TOPORD or UTEXRDelements select the appropriate filter in the level displaymanager
To create the DGN file put a fence around the elementsin the view
Type in the Key-in box fence file and the windowsSave As dialogue box will open so a file can be saved
Type in a file name and press Open. The dialogue boxwill close and then you must click on the view to accept
8/10/2019 HazlipJohn-BentleyDataAcquisition
46/59
CREATING FDOT SURVEY
Note that if this is a 3D TOPORD.d n file a 2D file mustbe created as the final deliverable
Close the current Data Ac uisition ro ect file and o enthe new 3D TOPORD.dgn file.
Click on File>Ex ort>2D to create the TOPORD01.d nfile
As in an surve deliverable normal MicroStation editin
will be necessary to complete the deliverable for deliveryto design
8/10/2019 HazlipJohn-BentleyDataAcquisition
47/59
8/10/2019 HazlipJohn-BentleyDataAcquisition
48/59
CREATING FDOT RIGHT OF WAY
In Data Acquisition there is no need to re-import or
Way deliveries even though levels, cells, line styles andattributes are significantly different
Change the FDOT Menu bar configuration fromRoadway Design to Right of Way Mapping
Re-open the DGN file and type into the Key-in box,dataacquisition redraw
8/10/2019 HazlipJohn-BentleyDataAcquisition
49/59
The R/W Style File is automatically attached. Type in the
-
8/10/2019 HazlipJohn-BentleyDataAcquisition
50/59
CREATING FDOT RIGHT OF WAY
- Style File features
however, they include:
- R/W style monuments- Some cells have a mask- Many of the dashed lines for existing point features
are now solid lines
- Some custom line styles like railroad centerlines aredifferent in right of way
8/10/2019 HazlipJohn-BentleyDataAcquisition
51/59
Creating The TOPORW File
The TOPORW can be visualized by checking the. .
- Check the box for Existing Topography- Check the box for Existing Monuments- o er oxes s ou e unc ec e un ess e
feature is desired to be included in the TOPORW File
identical to creating the TOPORD (Use fence file andthen export to a 2D)
8/10/2019 HazlipJohn-BentleyDataAcquisition
52/59
Data Acquisition will accommodate importing CAiCE
projects-
Right of Way)
- Choose the a ro riate seed file- Drag and drop the CAiCE PT4 file into Data
Acquisition
All i d h i i d i D
8/10/2019 HazlipJohn-BentleyDataAcquisition
53/59
All points and survey chains are imported into Data
C ti b d ith l d l ill t li it
8/10/2019 HazlipJohn-BentleyDataAcquisition
54/59
Creating a boundary with a closed polygon will set limits
To Import a CAiCE S rface right click on S rfaces and
8/10/2019 HazlipJohn-BentleyDataAcquisition
55/59
To Import a CAiCE Surface, right click on Surfaces and
Right click on Boundary in the surface tree and Import
8/10/2019 HazlipJohn-BentleyDataAcquisition
56/59
Right click on Boundary in the surface tree and Import
The DTM is limited to the selected boundary
8/10/2019 HazlipJohn-BentleyDataAcquisition
57/59
The DTM is limited to the selected boundary
EXPORTING POINTS AND CHAINS TO
8/10/2019 HazlipJohn-BentleyDataAcquisition
58/59
EXPORTING POINTS AND CHAINS TO
Data Acquisition is a work in progress
At some point a left turn must be made and data movedto GEOPAK
SS3 will have improvements over SS2 and the left turnwill be further down the road
Eventually there may not be a need to use GEOPAK for
surveying purposes
EXPORTING POINTS AND CHAINS TO
8/10/2019 HazlipJohn-BentleyDataAcquisition
59/59
EXPORTING POINTS AND CHAINS TO
Right Click on the Field Book in the D.A. tree and select
Export to>GEOPAK Format
The format is a GPK file
Point and survey chain features along with descriptorswill be included