HazardousLocation FiltrGard H2-H2U LowRes 051012

7/22/2019 HazardousLocation FiltrGard H2-H2U LowRes 051012

1/4

GELighting Solutions

imagination at work

GELighting Solutions

Hazardous Location LightingFiltr-Gard(H2 & H2U)


2/4

GE offers Hazardous Location Lighting for a variety of adverse environments. Rugged construction provides long life andreliable performance, combined with a range of optical and mounting options to provide light where it is needed.

Product Features

Applications

For adverse, severe duty and hazardous classifications(HID lamps)

Housing

Meets NEMA 4X Standards Wiring compartment

Finish

Polyester powder gray paint finish

Ratings

Listed General Non- Hazardous Suitable ForWet Locations. For metal halide lamps in polymeric

lamp containment barriers UL1598 Outdoor Salt Water Listed (formerly UL595)

UL844 Listed Class I, Division 2, Groups A, B, C and D Class II, Division 1, Groups E, F and G

Class II, Division 2, Group G Class III, Divisions 1 and 2

Mounting

Multiple mounting arrangements

Unique Features

Maxi-Luxguard Charcoal filters

Multiple optical assemblies NEMA decal

H2 shipped as components: Ballast, Mounting, Optical,and Accessories

H2U shipped all in one carton with lamp and opticalinstalled

Low copper aluminum alloys

Quick disconnect Mogul base socket

Safety chain provisions

NOTE:Please reference Temperature Profile Data to properlyselect Luminaire. This information can be found atgelightingsolutions.com on each Hazardous Lightingproduct page under Technical Resources.

/

All light sources are clear unless otherwise indicated. Before using, imperative to check Temperature Profile information to properly match Optical to Classification.

Optical Eligibility and Photometric Selection Table

70, 100,150W(55V) 250W 100W 175W 250W 400W

Filtr-Gard Luminaire HPS HPS MH EPMH EPMH EPMH

Globe and guard (FG, 250W max) (GG, 175W max) coated (6693) (FG) (FG) (FG)176618 176633 178323 176835 176835 N/A

Globe and guard (FG, 250W max) (GG, 175W max) and dome reflector (H2000-001) (FG) (FG) (FG)176619 176634 178324 176836 176836 N/A

Globe and guard (FG, 250W max) (GG, 175W max*) and deep dome reflector (H2000-006) (FG) (GG) (FG)177024 177445 178325 177446 179155 N/A

Globe and guard (FG, 250W max) (GG, 175W max) and angle dome reflector (H2000-002) (FG) (FG)176609 176645 178326 176838 179150 N/A

Angle Stanchion (5Jor 6J) with globe and guard (FG, 250W max) (GG, 175W max) (GG) (FG)177037 179136 178329 179130 179137 N/A

Angle Stanchion (5Jor 6J) with globe and guard (FG, 250W max) (GG, 175W max) (GG) (FG)and dome reflector (H2000-001) 176814 179139 178330 179133 179140 N/A

Glass refractor Type V with guard (V5G, 175W max) (R5G, 400W max) (R5G) (V5G) (R5G) (V5G) (V5G) (R5G) (R5G)

176807 179442 176639** 178331 17452876 179156 176778Glass refractor Type II with guard (V2G, 175W max) (R2G, 400W max) (R2G) (R2G) (V2G) (V2G) (R2G) (R2G) 176810 176646** 179151 17452875 179149 179153

Acrylic refractor Type V with guard (A5G, 150W max) 176867 N/A 178332 N/A N/A N/A

Acrylic refractor Type II with guard (A2G, 150W max) 176874 N/A 178333 N/A N/A N/A

Polycarbonate refractor Type V with guard (L5G, 150W max) 176864 N/A N/A N/A N/A N/A

Polycarbonate refractor Type II with guard (L2G, 150W max) *** 179152 N/A 178335 N/A N/A N/A

Enclosed reflector with ALGLAS(400W max) finish (without guard H2000-EN) (Coated)(with guard H2000-EG ) 176709 176725** N/A 176731 176731 177838

NOTE:C/F=Contact Factory N/A=Not Available

*For some ratings shown in Temperature Profile Information, GG can be used up to 250 watt maximum.

**These curves are for 400 watt HPS also.

***Hazardous Location UL Listing not available. UL1598 or non UL Listed only.


3/4

Ordering Number LogicFILTR-Gard(H2 & H2U)

See Ballast Selection TableUL844, UL159805L= 50W/HPS/HPF/

Reactor or Lag07L= 70W/HPS/HPF

Reactor or Lag10L= 100W HPS/HPF

Reactor or Lag15L= 150W(55V)/HPS/HPF

Reactor or Lag05K= 50W/HPS/Hot Restart

HPF Reactor07K= 70W/HPS/Hot Restart

HPF Reactor10K= 100W/HPS/Hot

Restart HPF Reactor15K= 150W(55V)/HPS/Hot

Restart HPF Reactor07S= 70W/HPS/Mag-Reg10S= 100W/HPS/Mag-Reg15S= 150W/HPS/Mag-Reg25S= 250W/HPS/Autoreg40S= 400W/HPS/Autoreg10M= 100W/MH/HPF Lag

(Med Base) Standard:Lamp not includedexcept with H2U

17E= 175W/EPMH/Autoreg25E= 250W/EPMH/Autoreg40E= 400W/EPMH/Autoreg

H2= FiltrGard H2LuminaireCAUTION:seeTemperatureProfile Data andLimitations.Standard: No lampincluded.

H2U= FiltrGardH2 Luminaireshipped all inone carton withlamp and opticalinstalled

60 Hz*0= 120/208/240/277Multivolt1= 1202= 2083= 2404= 2775= 480* For 50 Hz,contactfactory

3C= 3/4-in. Ceiling4C= 1-in. Ceiling3F = 3/4-in. Flexible pendant*4F = 1-in. Flexible Pendant*5J = 1-1/4-in. Angle Stanchion**6J = 1-1/2-in. Angle Stanchion**3P = 3/4-in. Rigid Pendant4P = 1-in. Rigid Pendant5S = 1-1/4-in. Straight Stanchion6S = 1-1/2-in. Straight Stanchion3W= 3/4-in. Wall4W= 1-in. Wall6P = 1-1/2-in. Pendant

*Use when support is non-rigid.** For limits see Temperature Profile.Caution: For metal halide, a universal

burning type lamp must be used.NOTE:Flexible pendant mountingcover must be used if unit is notrigidly mounted or fixture will nothang straight.

PROD. ID VOLTAGE WATTAGE/LIGHT SOURCE/BALLAST TYPE

F= Fusing(Not available withmultivolt or UL1598 OutdoorSalt Water units)

Q= Time Delay AutomaticallySwitched Quartz is available incertain ratings for class II only(not available for Low Profilemounting)

U = UL1598 Outdoor Salt Water/UL844

OPTIONS

UL844, UL1598, UL1598Outdoor Salt WaterGG = Small Globe with GuardFG = Large Globe with GuardEG = Enclosed Reflector ALGLASfinish with

Guard (not UL1598 Outdoor Salt Water)NOTE:Not available with H2U

V5G = 8-in. (203mm) Glass Refractor Type V withguard

V2G = 8-in. (203mm) Glass Refractor Type II withGuard

R5G= 12-in. (305mm) Glass Refractor Type Vwith Guard

R2G= 12-in. (305mm) Glass Refractor Type IIwith Guard

UL844, UL1598 ONLY+

A5G= 12-in. (305mm) AcrylicRefractor Type V with GuardA2G= 12-in. (305mm) Acrylic

Refractor Type II with GuardL5G = 12-in. (305MM) Polycarbonate Refractor

Type V with GuardL2G = 12-in. (305mm) Polycarbonate Refractor

Type II with Guard

NOTE:Remove G as last d igit to eliminate Guard

+NOTE:When using one of these opticals fora classified area, a special ballast assemblyis required. Order, for example, similar toH201L3PA5G except for use with specifiedoptical. Standard max Ambient Temp is 40C for 55C, 65C, 90C, contact factory. Beforeusing, see Temperature Profile information.

OPTICALMOUNTING

_ _ _ - _ - _ _ _ - _ _ - _ _ _ - _

Ballast Selection TableTemperature is 40C unless otherwise indicated.

Ballast Type Voltage Light

Wattage Source Multivolt 120 208 240 277 480

50 HPS L K,L N/A N/A N/A L

70, 100 HPS L,K,A L,K,S L,K,S L,K,S L,K,S K,S

150 (55V) HPS L,K,A L,K,S L,K,S L,K,S L ,K,S K,S

250, 400 HPS S S S S S S

100 MH M* M* M* M* M* M*

175, 250, 400 EPMH E E E E E E

+Ballast TypeN/A = Not Available

K= Hot Restart (HPF Reactor Type)L= High Pressure Sodium HPF Reactor or LagE= Energy Act Compliant Pulse MH (EPMH)A= HPS AutoregM*= Metal Halide, HPF LagS= High Pressure Sodium Mag-Reg or Autoreg

LUMINAIRE

Product DimensionsFiltr-Gard(H2 & H2U)


4/4

OLP-2915 (Rev. 05/10/12)

GE Lighting Solutions 1-888-MY-GE-LED www.gelightingsolutions.com 1 - 8 8 8 - 6 9 - 4 3 - 5 3 3

GE Lighting Solutions, LLC is a subsidiary of the General Electric Company. The GE brand and logo are trademarks of the General Electric Company.

2012 GE Lighting Solutions, LLC. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions.

Product DimensionsFiltr-Gard(H2 & H2U)

CEILING MOUNT

CEILING MOUNT

Opticals Check Temperature Profiles & Listings

Globe & Guard Dim. A

FG9-in. (229mm) 3.7 lbs 2 kgs 9.250 in. (235mm)

GG7-in. (178mm) 3.0 lbs 1 kgs 8.125 in. (206mm)

R2G, R5G(glass) 14.7 lbs 7 kgs 10.125 in. (257mm)

L2G, L5G(polycarbonate) and A2G, A5G(acrylic) 6.0 lbs 6 kgs 9.500 in. (241mm)

Enclosed Industrial Reflector (EGor E) 5.0 lbs 2 kgs n/a

8-inch Glass Reflector (V2Gor VSG) 3.9 lbs 1.5 kgs n/a

FLEXIBLE PENDANT MOUNT

GLOBE & GUARD

8.250 in.(210mm)

7.500 in.(191mm)

9.375 in. (238mm) DIA

GLOBE & GUARDENCLOSED INDUSTRIAL REFLECTOR 8 INCH GLASS REFLECTOR

ANGLE STANCHION MOUNT

PENDANT MOUNT

WALL MOUNT

STRAIGHT STANCHION MOUNT

MountingsBallast

Wattage (lbs) (kgs)

50 14.0 6

70 13.0-19.2 6-9

100 13.5-20.5 6-9150 (55V) 14.5-21.1 7-10

175 14.4-15.5 7-7

250 16.7-22.5 8-10

400 19.3-22.7 9-10

NOTE: Does not include mountings or opticals.

DATA

ApproximateNet Weight

ApproximateNet Weight

Approximate Net Weight

(lbs) (kgs)

Ceiling 3/4-inch=3C 1-inch=4C 3.5 2

Flexible Pendant 3/4-inch=3F 1-inch=4F 2.5 2

Angle Stanchion 1-1/4-inch=5J1-1/2-inch=6J 5 2

Pendant 3/4-inch=3P 1-inch=4P 3.5 2Wall 3/4-inch=3W 1-inch=4W 5 2Straight Stanchion 1-1/4-inch=5S 1-1/2-inch= 6S 6.7 3

Dim. 9 in. (229mm) 7 in. (178mm)

A 13.250 in (337mm) 11.750 in. (298mm)

B 13.625 in. (346mm) 12.125 in. (308mm)

Globe

Documents

HazardousLocation FiltrGard H2-H2U LowRes 051012