Hany Salah # Cell: +966565919767 # Email: enghanysalah@gmail.com

Value Proposition:Innovative and competent performer for 5 years of experience in providing product line supervision and quality control for one most advanced technology manufactures military factory in Egypt. Which includes Plans and directs activities concerned with development, application, and maintenance of quality standards for industrial processes, materials, and products: Develops and initiates standards and methods for inspection, testing, and evaluation, utilizing knowledge in engineering fields such as electrical, or mechanical. ____________________________________________________________________________________

Professional Experience:Total Experience in years: 5 yrs.

06 /2011 – 06/2016 E.T.P

Job description

AN ENGINEER PARTICIPATED IN MANY PROJECTS LIKE: 1- A V-TYPE, 12 CYLINDERS DIESEL ENGINE OVERHAULING. 2- A TRAILER 70 TON (THE I- BEAMS) CONSTRUCTION. 3- A DRAGON MART EXPANSION (UNDER GROUND UTILITIES). The graduation project.

MORE DETAILS The diesel engine is totally overhauled from the disassemble station till the final test of the engine,

all parts must to be checked for any nonconformance state according to specification' requirements. once the parts being approved they are moved to the assembly line, then to the dynamometer or "dyno" for short, is a device for measuring force, torque, or power.Supervising the dismantling of the old engines and inspect all the parts to determine which are good and which are not.Supervising the assembling process with all suitable and working parts.Checking the engine finally at the dynamometer test room for its speed, horse power, torque, fuel consumption, and temperature.

Had participated in the product of trailer 70 especially the two I-beams the project aimed to weld two flanges to the middle web using the gas shielded high current to produce 12 mm weld size by three passes. Two things must be achieved correct dimension within specified tolerances and the weld without any defects by inspecting in process and the final product visually and with dye penetrant to detect if there is any weld defects like ( surface crack, porosity, over lab, undercut and under size) to be repaired.

At dragon mart expansion project I was responsible about doing the method of statement of how to laying and installing the underground pipelines such (sewer, internal firefighting, external firefighting, potable water, irrigation, and chilled water). and doing the shop drawing for the whole project.

Doing the method of statements of how to install pipes network for each type of material (GRE, GRP, UPVC and DI) pipes and all their fittings, valves and joints all according to their type of material.

Providing the shop drawings to be submitted including all the details to avoid any damage at the site while doing the work.

Providing the all information about the tasting method of all the pipe networks.

The graduation project was about establishing a simple chilled water system by selecting the suitable tank capacity, the suitable pump to circulate the amount of water through the selected pipes.A refrigeration system had been designed to cool water to the required temperature.Then the water had been carried to the fan coil to provide a heat exchange between the cooled water and air entering the room.A control system had been established to maintain the temperature of the room at the specified degree.

From 07/2016 and still

Working for ALHANOUF GROUP, KSA at building maintenance department. The project I was in charge of is MOHAMED BN NAIEF CONSULTANCY AND CARE

CENTER. Our task is aimed to maintain and operate all the mechanical system

Education & training04 / 2004 – 05 / 2009 Benha university Mechanical Engineer BSC. Mechanical Engineering

Completed BSC. Engineering from Shubra faculty of engineering .Cairo, Egypt. Graduation Project: Chilled Water System.

07 / 2008 – 08 / 2008 Pathfinder Egypt Summer Training

Logging-while-drilling and Measurement-while-drilling Services, Directional Drilling Services and Down-hole Drilling Motors

08 / 2007 – 09 / 2007 EZZ steel making Summer Training

Training on the steel & Iron production line.

07 / 2008 – 08 / 2008 Benha For Electronic Industrials Summer Training

Working on CNC. Machines, Maintenance Department, Designing sheets and Air Conditioning Department.

Certification NDT-UT-013-770

With recommendation of the American society of non-destructive testing SNT-TC-1A Testing method is ultrasonic inspection level || qualified for material and weldsCertificate date 13/03/2013. Expiry date 12/03/2018

Design of Fire Alarm and Firefighting System. Was held from 4/9/2011 to 28/10/2011 at the Middle East training and consultation office.

Design of Plumbing Systems. Was held from 1/2/2012 to 28/2/2012 at the Middle East training and consultation office.

Design and executing of central air conditioning, Ventilation and BMS.

Was held from 20/10/2014 to 19/12/2014.Held by Ayman Omar (AOC consultancy electro-mechanical)

Highlights of Qualification

1. Proven track record working in Safety Conscious Environment 2. Ability to read, interpret, verify and document conformance to contract documents 3. Successfully met Project Quality, Cost and Schedule Targets 4. Effective oral and Written Communication Skills. Excellent Interpersonal, Organizational,

Leadership and Time Management Skills. Ability to work independently with minimal Supervision as well as a TEAM.

5. Experience in coordination activities and resolving issues among proponents, contractors and other parties to allow installation and commissioning activities to progress according to plan and the final completion.

6. Possess computer skills including latest versions of MS Office and other related Software including MS Project, AUTOCAD, and Adobe Photoshop.

7. Extensive knowledge of testing and improving quality of services and products 8. Ability to lead a team with excellent interpersonal skills 9. Excellent command over written and verbal communications 10. Positive attitude with good decision -making skills 11. Result-oriented with excellent management skills 12. Possess excellent technical knowledge and ability to handle multiple tasks 13. In-depth knowledge of developing plans and methods for quality improvement 14. Possess excellent monitoring and supervisory skills 15. Ability to handle multiple tasks with excellent organizational skills16. ability to make a power transmitting system using the hydrostatic pumps (positive displacement or

non positive displacement) and valves (pressure relief valve ,directional control valve,……etc.)17. Knowing the main concepts about diesel engine, internal combustion engine, gas turbine engine,

propulsion engine, the design of compressor and the turbine.18. Learned about the geometric tolerance what is the importance of it in any drawing sheet in the

manufacturing process. 19. Very comfortable with any new things to learn can easily prepare myself to learn it.20. Aware of the importance of time and very series doing duties.21. Can easily and in short time act and being comfortable with any new environment what ever kind of

people are different.

Personal Details: Date of Birth & Age : March 9th 1986Age : 30 years.Marital Status : MarriedNationality : EgyptianTelephone No : +966565919767 Address : Riyadh, KSALanguages known : English (RWS), Arabic (RWS), Hobbies & interests : Listening music, singing, cooking, movies and cricket.Driver License : NO. 320138 EXP. 23/03/2023

Available on request.