Hands-Off, 24/7 Lubrication Solutionsweb.applied.com/assets/temp/7C588D4C-5056-8102-5E9DB3DE94E05… · Hands-Off, 24/7 Lubrication Solutions Applied Industrial Technologies and SKF

Hands-Off, 24/7 Lubrication SolutionsApplied Industrial Technologies and SKF

Applications:• Restrictive and hazardous locations• Bearing housing lubrication• Electric motors• Fans and pumps• Conveyors• Cranes• Chains (oil)• Elevators and escalators (oil)

Features and Benefits:• Toolless set up• Stoppable• Detailed information on the label minimizes risks of improper installation• Designed and tested for the toughest real working conditions• IP 68 – dust tight and water proof ATEX approved for zone 0• Optimum dial readability• Detachable batteries for an environmentally friendly disposal• Specially designed top ring for an optimum grip• Transparent container facilitates inspection tasks

Authorized distributor:Products of:

Did you know that as much as 40% of premature bearing failures are caused by lubrication problems (too much, too little, contamination, etc.)? Maintenance teams also have to spend extensive amounts of time manually greasing hard-to-access and dangerous lubrication points. Applied® is proud to offer automatic lubricators from SKF that deliver the right lubrication, in the right amount with 24/7 reliability to keep your equipment up and running! From single-point to multi-point units, SKF automatic lubricators are an easy, cost-effective and reliable way to improve machine lubrication.

SKF SYSTEM 24 – LAGD Series – Single PointThese gas driven single point automatic lubricators are supplied ready-to-use straight from the box and filled with a wide range of high performance SKF lubricants. Tool-free activation and time-setting allow easy and accurate adjustment of lubrication flow.

$$

Performance

SKF Lubrication Offering

Manual lubrication

LAGD 125SYSTEM 24

TLMR

LAGD 400

LAGD 1000

Lubricant TypeReservoirCapacity

(mL)Order No. Mfr. No.

LAGD GB2: Green, biodegradable bearing grease 125 100729391 LAGD125/GB2LAGD HFP15: Food grade, NSF H1 approved chain oil 125 102074522 LAGD125/HFP15

LAGD EM2: High viscosity, mineral-based grease with lithium soap60 101169774 LAGD60/EM2125 101169770 LAGD125/EM2

LAGD FP2: Food-grade grease60 101953195 LAGD60/FP2125 100729392 LAGD125/FP2

LAGD HP2: High performance polyurea grease60 101490343 LAGD60/HP2125 101366310 LAGD125/HP2

LAGD HHT26: Chain oil; for high temperature applications 125 101169771 LAGD125/HHT26

LAGD HB2: High viscosity, high temperature grease60 101402573 LAGD60/HB2125 101803931 LAGD125/HB2

LAGD HMT68: Chain oil; includes EP additives for general chain lubrication 125 100729390 LAGD125/HMT68LAGD WA2: Wide temperature range, mineral oil-based, EP-type lithium complex grease

60 100729389 LAGD60/WA2125 100729393 LAGD125/WA2

Cartridges/Refills

LubricantType

Reservoir Capacity

(mL)

TLMR 101 TLMR 201

Order No. Mfr. No. Order No. Mfr. No.

All Purpose Industrial and Automotive 380 110607551 LGMT3/MR380B 110607559 LGMT3/MR380

Food Compatible120 110607548 LGFP2/MR120B 110607555 LGFP2/MR120

380 110607547 LGFP2/MR380B 110607556 LGFP2/MR380

Wide Temperature RangeHigh Load 380 110607549 LGWM2/MR380B 110607557 LGWM2/MR380

Wide Temperature RangeHigh Load

Extreme Pressure

120 110588087 LGWA2/MR120B 110607542 LGWA2/MR120

380 110607541 LGWA2/MR380B 106532965 LGWA2/MR380

High PerformanceHigh Temperature 380 110588085 LGHP2/MR380B 110607554 LGHP2/MR380

High TemperatureHigh Viscosity

High Load380 110607545 LGHB2/MR380B 110607553 LGHB2/MR380

Extreme Pressure 380 110607550 LGEP2/MR380B 110607558 LGEP2/MR380

Extremely High Viscosity 380 110607544 LGEV2/MR380B 110607552 LGEV2/MR380

SKF Lubricating Solutions

TLMR Series SKF Automatic Lubricant Dispenser – Single Point The SKF Automatic Lubricant Dispenser – TLMR – is an electro-mechanical automatic lubricator designed to supply grease to a single lubrication point. With a relatively high pressure of 30 bars, this lubricator can operate at long distances providing optimum results with difficult-to-reach and unsafe lubrication locations. With a wide temperature range and robust design, the TLMR lubricator is suitable for operating conditions with various levels of temperature and vibration.

Features and Benefits• Filled with high quality SKF greases• Temperature independent dispense rate• Dispense rate from 1 to 24 months• Available in two versions: TLMR 101 powered by batteries (standard Lithium AA type) and TLMR 201

powered by 12 to 24 VDC• Available with non-refillable cartridges in two sizes: 120 and 380 ml• Easy to install and use• High protection (IP 67) against water and dust• Remote mounted up to 16 ft from application

Applications• Remote mounting for lubrication in hazardous and restrictive locations• Applications requiring high lubricant consumption• Excellent water and dust protection makes TLMR suitable for general machinery applications and food

processing machinery• Excellent high temperature performance makes TLMR suitable for engine rooms and hot fan applications

www.mapro.skf.com · skf.com/mount · skf.com/lubrication

Ordering detailsGrease Description TLMR 101 refill sets (cartridge and battery) TLMR 201 cartridges

120 ml 380 ml 120 ml 380 ml

LGWA 2 High load, extreme pressure, widetemperature range bearing grease

LGWA 2/MR120B LGWA 2/MR380B LGWA 2/MR120 LGWA 2/MR380

LGEV 2 Extremely high viscosity bearing grease with solid lubricants

– LGEV 2/MR380B – LGEV 2/MR380

LGHB 2 High load, high temperature, high viscosity bearing grease

– LGHB 2/MR380B – LGHB 2/MR380

LGHP 2 High performance, high temperature bearing grease

– LGHP 2/MR380B – LGHP 2/MR380

LGFP 2 Food compatible bearing greaseNSF H1 certified

LGFP 2/MR120B LGFP 2/MR380B LGFP 2/MR120 LGFP 2/MR380

LGWM 2 High load, wide temperature rangebearing grease

– LGWM 2/MR380B – LGWM 2/MR380

LGEP 2 Extreme pressure bearing grease

– LGEP 2/MR380B – LGEP 2/MR380

LGMT 3 All purpose industrial and automotive grease

– LGMT 3/MR380B – LGMT 3/MR380

Complete set Designation

TLMR 101 380 ml TLMR 101/38WA2


TLMR pump Designation

Lubricator powered by batteries TLMR 101

Lubricator powered by 12-24 V DC TLMR 201

® SKF is a registered trademark of the SKF Group.

© SKF Group 2014The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless prior written permission is granted. Every care has been taken to ensure the accuracy of the information contained in this publication but no liability can be accepted for any loss or damage whether direct, indirect or consequential arising out of the use of the information contained herein.

PUB MP/P8 14066 EN · January 2014



120 ml 380 ml 120 ml 380 ml




























120 ml 380 ml 120 ml 380 ml




























120 ml 380 ml 120 ml 380 ml




























120 ml 380 ml 120 ml 380 ml




























120 ml 380 ml 120 ml 380 ml




























120 ml 380 ml 120 ml 380 ml




























120 ml 380 ml 120 ml 380 ml


























Complete Lubricator Kits

Order No. Mfr. No. Power Supply

110492602 TLMR101/38WA2 4 AA Lithium batteries, included

110492603 TLMR201/38WA2 12-24 V DC

TLMR Series Automatic Lubricant Dispenser - Accessories

Pump Only

Order No. Mfr. No. Power Supply

110492600 TLMR101 4 AA Lithium batteries, included

110492601 TLMR201 12-24 V DC

Flexible Hose

Order No. Mfr. No.Hose I.D.

(mm)Hose O.D.

(mm)Length(mm)

110588916 LAPT1000S 4 6 1,000110607561 LAPT5000S 4 6 5,000

Tube Connection Male

Order No. Mfr. No.ThreadedEnd Size

110607562 LAPF M1/8S G 1/8110607563 LAPF M1/4S G 1/4

Technical data

Designation LAGD 400 LAGD 1000/DC LAGD 1000/AC

Order No. 101169773 Varies by number of lubrication points Varies by number of lubrication points

Number of outlets 1 to 8 10 to 20 10 to 20

Max. length of pipes 5 m (16 ft.) 6 m (19.7 ft.) 6 m (19.7 ft.)

Flow rate Up to 10 cm³/day (0.3 US fl. oz/day)

Up to 16 cm³/day(0.5 US fl. oz/day)

Up to 33 cm³/day(1.1 US fl. oz/day)

Reservoir capacity 0.4 litre (13.5 US fl. oz) 1 litre (33.8 US fl. oz) 1 litre (33.8 US fl. oz)

Tubing 6 x 1.5 mm (1/4 x 0.06) 20 m (65 ft.) and fittings included

6 x 1.25 mm (0.05 in.) 50 m (164 ft.) and fittings included

6 x 1.25 mm (0.05 in.) 50 m (164 ft.) and fittings included

Greases NLGI 1, 2 and 3 Up to NLGI grade 2 Flow pressure <700 mbar

Up to NLGI grade 2 Flow pressure <700 mbar

Permissible operating temperature 0 to 50 °C (30 to 120 °F)

–25 to +75 °C (–15 to +165 °F)

–25 to +60 °C (–15 to +140 °F)

Max. operating pressure 40 bar (600 psi) 150 bar (2 175 psi) 150 bar (2 175 psi)

IP Rating IP54 IP65 IP65

Rated voltage 110–240 V AC, 50–60 Hz or 24 V DC

24 V DC 110–240 V 50/60 Hz

Connection thread G 1/4 G 1/8 G 1/8

LAGD 400 uses SKF 14 oz. grease cartridges

Call Applied Industrial Technologies at 1-877-279-2799 or visit www.Applied.com

SKF LAGD 400 and SKF LAGD 1000 – Multi-PointSKF Multi-Point Lubricators are designed to simultaneously feed several points. They are often the most user-friendly and cost-effective option when longer distances, high flow or enhanced monitoring features are required. These ready-to-use centralized lubrication systems can be installed without any additional assistance and require no special training to be configured.

Features and Benefits• Easy to install and use• Transparent reservoir allows visual inspection• Refillable through grease fitting• Alarm function for blocked feed lines and empty reservoir• Machine steering (i.e. lubricator only operates while machine is running)• Electronic setting and read-out of control parameters

Applications• Series of lubrication points with similar requirements• Components requiring large amounts of grease• Critical applications requiring continuous

monitoring or machine steering

Contact Your Local Applied® Service Center

1-877-279-2799

© 2014 Applied Industrial Technologies, Inc. All Rights Reserved. IN-0514-20-8831

WARNING: Injury, death, property damage,

and/or equipment failure may result from

the misuse or misapplication of the products

featured in this publication. The information in

this publication is provided “AS IS,” WITHOUT

ANY WARRANTY OF THE INFORMATION’S

ACCURACY OR THE PRODUCTS’ SUITABILITY

FOR ANY PARTICULAR USE.

Authorized distributor:

Corporate Headquarters

1 Applied Plaza

Cleveland, Ohio 44115

Toll Free Phone: 1-877-279-2799

Applied.com

Products of:

SKF DialSet has been designed to help you to set up your SKF automatic

lubricators. After selecting the criteria and grease appropriate for your

application, the program provides you with the correct settings for your

SKF automatic lubricators. It also provides a quick and simple tool for

relubrication intervals and quantity calculations.

Quick Tool For Relubrication Calculation

Features and Benefits

• Allows quick calculation of the relubrication intervals based on

the operating conditions of your application

• Calculations are based on SKF lubrication theories

• Calculated lubrication intervals depend on the properties of

the selected grease, thereby minimizing the risk of under- or

overlubrication and optimizing grease consumption

• Calculations take into account SKF automatic lubrication systems

and grease dispense rates, thus facilitating the selection of the

correct lubricator setting

• Recommended grease quantity depends on the grease

replenishment position; side or W33 for optimum grease

consumption

• Includes a complete list of the SKF SYSTEM 24 accessories

• Available online or downloadable at www.skf.com/lubrication

• Available for Android and iPhone


Ready

Set

Go

Documents

Hands-Off, 24/7 Lubrication Solutionsweb.applied.com/assets/temp/7C588D4C-5056-8102-5E9DB3DE94E05… · Hands-Off, 24/7 Lubrication Solutions Applied Industrial Technologies and SKF