MultiDrug Urine ScreeningProcedure

DOA Handheld Reader Touch

Overview

Fingerprint Scanner

Barcode Scanner

Cassette well

SD-Card

Touch Screen Pen

Touch Screen

Printer

Keyboard

Battery tray

ON/OFFButton

Deviceself-testing procedure on startup.

qAfter testing • Camera• Code Reader• Fingerprint sensor• Printer• GPS Receiver• ID-Reader for Functionallity, the software unlocks with green GO-Button and the Device is ready for use.

Tab the GO Button to start a drug screening procedure.

An animation is showing the next steps to fulfill the drug screening procedure. Starting with scanning the barcode on the bottom of the cassette.

The display is showing the Barcode-Button to remember for the next steps.

Urine Sample CollectionOpen the foil pouch completely.

2-chamber foil pouch contains1 pair of vinyl gloves 2. Urine Drugscreening Cassette and Pipette

Scan the QR-Code on the bottom of the cassette, to validate testtype, drugparameters, cut-offs and expiry date. To do so, skip the barcode-scan animation on the device, by pushing the blue „forward-arrow“.

Scan the QR-Code on the bottom of the cassette, to validate testtype, drugparameters, cut-offs and expiry date.

To do so, skip the barcode-scan animation on the device, by pushing the blue „forward-arrow“.

The red laser-crosshair helps to aim for the QR-CodeDo not look into the beam!

Valid Code.Drug screening cassette got validated.

Remaining shelf life is displayed.

Also on display:

Test Type: Amount of Parameters

Test Code: Product number

Test Lot: Batch number

Expration Date:

Parameter Abbreviations with corresponding cut-offs.

Proceed with the blue „forward arrow“

The animation is guiding through the next steps:

Use empty urine cup

Instruct donor to supply sample

Fill pipette

Add 3 drops of specimen to each sample well

Start timer

Let chromatographie run for 5 minutes

WARNING!

In case you abort the timer function, you have to start from the beginning ( GO-Button )

The animation is guiding through the next steps:

Use empty urine cup

Instruct donor to supply sample

Fill pipette

Add 3 drops of specimen to each sample well

Start timer

Let chromatographie run for 5 minutes

WARNING!

In case you abort the timer function, you have to start from the beginning ( GO-Button )

The animation is guiding through the next steps:

Use empty urine cup

Instruct donor to supply sample

Fill pipette

Add 3 drops of specimen to each sample well

Start timer

Let chromatographie run for 5 minutes

WARNING!

In case you abort the timer function, you have to start from the beginning ( GO-Button )

The animation is guiding through the next steps:

Use empty urine cup

Instruct donor to supply sample

Fill pipette

Add 3 drops of specimen to each sample well

Start timer

Let chromatographie run for 5 minutes

WARNING!

In case you abort the timer function, you have to start from the beginning ( GO-Button )

The animation is guiding through the next steps:

Use empty urine cup

Instruct donor to supply sample

Fill pipette

Add 3 drops of specimen to each sample well

Start timer

Let chromatographie run for 5 minutes

WARNING!

In case you abort the timer function, you have to start from the beginning ( GO-Button )

The animation is guiding through the next steps:

Use empty urine cup

Instruct donor to supply sample

Fill pipette

Add 3 drops of specimen to each sample well

Start timer

Let chromatographie run for 5 minutes

WARNING!

In case you abort the timer function, you have to start from the beginning ( GO-Button )

The animation is guiding through the next steps:

Use empty urine cup

Instruct donor to supply sample

Fill pipette

Add 3 drops of specimen to each sample well

Start timer

Let chromatographie run for 5 minutes

WARNING!

In case you abort the timer function, you have to start from the beginning ( GO-Button )

The animation is guiding through the next steps:

Use empty urine cup

Instruct donor to supply sample

Fill pipette

Add 3 drops of specimen to each sample well

Start timer

Let chromatographie run for 5 minutes

WARNING!

In case you abort the timer function, you have to start from the beginning ( GO-Button )

The animation is guiding through the next steps:

Use empty urine cup

Instruct donor to supply sample

Fill pipette

Add 3 drops of specimen to each sample well

Start timer

Let chromatographie run for 5 minutes

WARNING!

In case you abort the timer function, you have to start from the beginning ( GO-Button )

The animation is guiding through the next steps:

Use empty urine cup

Instruct donor to supply sample

Fill pipette

Add 3 drops of specimen to each sample well

Start timer

Let chromatographie run for 5 minutes

WARNING!

In case you abort the timer function, you have to start from the beginning ( GO-Button )

Slide the cassette into the Handheld Reader as shown in animation.

Proceed with the blue „forward arrow“

Press OK to start evaluation

Progress of evaluation is visualized.

Progress of evaluation is visualized.

Remove Cassette from Device.

Results are displayed in a very clear and easy to read way.

Possible Results are:

No drug detected

Lab test required

Invalid – test must be repeated with new cassette.

Proceed with the blue „forward arrow“

Test Identification Number will be generated automatically

Choose Officer in charge.

Note:Officers can be individually set up in the settings menu.

Note: You can not proceed with the blue „forward arrow“ until all *marked fields are filled.Button will stay grey until all required fields are filled.

Test Identification Number will be generated automatically

Choose Officer in charge from drop down menu.

Note:Officers can be individually set up in the settings menu.

Proceed with the blue „forward arrow“

Fill all * marked fields to complete the form.

Fill all * marked fields to complete the form.

Fill all * marked fields to complete the form.

Choose date of birth.

Set

DAY, MONTH and YEAR

Set GENDER

Set GENDER

Proceed with the blue „arrow down button“

Proceed with the blue „arrow down button“

The form can be customized to national

requirements

This is the data overview.

It may have several pages, depending on the required

data entries.

Check all entries andproceed with the blue

„forward button“

This is the data overview.

It may have several pages, depending on the required

data entries.

Check all entries andproceed with the blue

„forward button“

This is the data overview.

It may have several pages, depending on the required

data entries.

Check all entries andproceed with the blue

„forward button“

Choose a finger to scan from the drop down menu.

The donor should place the corresponding finger onto the scanner.

Press the scan button and wait until the message: „Finger detected – start download“ is displayed.

The donor can remove the finger – the fingerprint will appear after a few seconds. If the result is unsufficient, cancel with red cross button and repeat.

Choose a finger to scan from the drop down menu.

The donor should place the corresponding finger onto the scanner.

Press the scan button and wait until the message: „Finger detected – start download“ is displayed.

The donor can remove the finger – the fingerprint will appear after a few seconds. If the result is unsufficient, cancel with red cross button and repeat.

Choose a finger to scan from the drop down menu.

The donor should place the corresponding finger onto the scanner.

Press the scan button and wait until the message: „Finger detected, start download“ is displayed.

The donor can remove the finger – the fingerprint will appear after a few seconds. If the result is unsufficient, cancel with red cross button and repeat.

Choose a finger to scan from the drop down menu.

The donor should place the corresponding finger onto the scanner.

Press the scan button and wait until the message: „Finger detected, start download“ is displayed.

The donor can remove the finger – the fingerprint will appear after a few seconds. If the result is unsufficient, cancel with red cross button and repeat.

If fingerprint scan is sufficient, proceed.

Activate signature field.

Donor should sign

Confirm signature with OK

Save result

Result is saving

You may print a receipt

You can print as often as required by pushing the button.

Proceed with blue „forward arrow button“ to return to „home screen“.

Ready to start new test procedure