Upload
others
View
9
Download
0
Embed Size (px)
Citation preview
HANDBOOK FOR GRADUATE STUDENTS
Department of Geology and Geological Engineering
Colorado School of Mines
Golden, Colorado 80401
Academic Year 2020
i
TABLE OF CONTENTS
INTRODUCTION .......................................................................................................................... 1 MISSION STATEMENT ............................................................................................................... 1 VISION STATEMENT .................................................................................................................. 1 VALUES ......................................................................................................................................... 1
PROFILE OF DEPARTMENT ...................................................................................................... 2 COLORADO RESIDENCY ........................................................................................................... 2 FINANCIAL ASSISTANCE .......................................................................................................... 2 AFFIRMATIVE ACTION.............................................................................................................. 2 DEPARTMENTAL INFORMATION ........................................................................................... 3
Office Personnel.......................................................................................................................... 3 Supplies/Copying for Teaching Assistants (TAs)....................................................................... 3
Spending Money ......................................................................................................................... 3 Graduate Student Offices ............................................................................................................ 5
Keys/Blastercards ....................................................................................................................... 5 Mailboxes .................................................................................................................................... 5
Departmental Computer Facilities .............................................................................................. 6 I&TS ........................................................................................................................................... 7 Use of Laboratories and Equipment ........................................................................................... 7
Lab and Work Request Procedures ............................................................................................. 8 Thin Section Lab ..................................................................................................................... 8
Policies and Procedures for using Geochemistry Labs in Berthoud 406 .................................... 9 Laboratory Safety Training Provided by EHS ...................................................................... 10
GENERAL REQUIREMENTS FOR GEOLOGY AND GEOLOGICAL ENGINEERING
GRADUATE DEGREE PROGRAMS ......................................................................................... 11
Introduction ............................................................................................................................... 11 Registration ............................................................................................................................... 11 Eligibility for Reduced Registration ......................................................................................... 12
Registration Requirements – Reduced Registration How to Qualify ....................................... 12 Leave of Absence ...................................................................................................................... 13
Grade Point Average ................................................................................................................. 14 Transfer Credits ........................................................................................................................ 14 Progress Grades ........................................................................................................................ 14 Incomplete Grades .................................................................................................................... 14 Deficiencies............................................................................................................................... 15
Research/Thesis Committees .................................................................................................... 15 Qualifying Examinations .......................................................................................................... 16
Degree Audit and Admission to Candidacy.............................................................................. 16 Non-Thesis Procedures ............................................................................................................. 17 Thesis and Dissertation Procedures .......................................................................................... 17
Proposal................................................................................................................................. 17 Budget ................................................................................................................................... 18 Proprietary Research ............................................................................................................. 18
ii
Manuscript Preparation ......................................................................................................... 18
Thesis and Dissertation Defense ............................................................................................... 18 Graduation Deadlines................................................................................................................ 19
Degree Level Change and Program Change ............................................................................. 23 Completion of M.Sc. Program and Admission to Ph.D. Program ............................................ 24 Checkout Process ...................................................................................................................... 24
Appendix:
Mines Administrative Processing Services (MAPS) website
Preferred Travel and Car Rental Agencies
Department
Checkout – Please see Dorie or Cheryl
Graduate Studies forms – Please go to the Graduate Studies website
(https://www.mines.edu/graduate-studies/) for the most current forms as they are revised and
upgraded periodically:
Step-by-Step Guide
Advisor/ Thesis Committee Requirements
MS Non-thesis Graduate Deadlines Chart
MS Thesis Graduate Deadlines Chart
PHD Graduate Deadlines Chart
Thesis Defense Request Form
Transfer Credit Limits
Laboratories and Equipment
Analytical Equipment List
General Laboratory and Workshop Safety
1
HANDBOOK FOR GRADUATE STUDENTS
DEPARTMENT OF GEOLOGY AND GEOLOGICAL ENGINEERING
COLORADO SCHOOL OF MINES
INTRODUCTION This Handbook presents information and resources for graduate study in the Department of Geology and
Geological Engineering (GE) and is intended to ease your transition into the Department and your life as
a graduate student. This Handbook supplements and is subordinate to regulations in the Bulletin of
Colorado School of Mines (CSM). It is the responsibility of each graduate student to read and understand
information pertaining to graduate study in both this Handbook and the Bulletin. Members of the faculty,
the Department assistants, or other graduate students can generally answer questions regarding the
Handbook and the Bulletin.
Departmental focus areas include energy and minerals resources, hydrology, engineering
geology/geotechnics, geochemistry, basic geosciences, and related new fields of endeavor.
MISSION STATEMENT
To discover and disseminate knowledge for society through compelling research, excellence in teaching
and engaging outreach by creating a welcoming and vibrant community that cultivates critical thinking,
intellectual curiosity, and integrity.
VISION STATEMENT
To be a game-changer in discovery, understanding and education in geoscience to intelligently engineer
Earth’s resources.
VALUES Experience: We deliver a unique educational experience in the classroom, laboratory and the field.
Discovery: We encourage creativity and celebrate insights in research.
Excellence: We expect rigor and diligence in our work, honesty and accountability in our actions, and
we embrace professional growth.
Compassion: We treat others with respect, seek out diverse thought and support each other’s willingness
to take risks.
Enthusiasm: We foster a positive friendly atmosphere, and lead with optimism.
Teamwork: We work together and collaborate to achieve results that we cannot accomplish individually.
2
PROFILE OF DEPARTMENT
The Department of Geology and Geological Engineering emphasizes the study of science and engineering
and the application of that knowledge to the solution of resource exploration and development,
engineering and environmental problems. Graduate degrees are offered in Geological Engineering,
Geology, Geochemistry, and Hydrology. The programs are broad enough to prepare graduates for a wide
variety of careers in academic, research, or industrial organizations. The faculty is composed of full-time
and adjunct geologists and engineers. Currently there are 119 registered undergraduate students and 92
registered graduate students in the Department programs.
COLORADO RESIDENCY
All non-residents of Colorado who are U.S. citizens are strongly advised to begin to establish Colorado
residency before they begin their first semester of study at CSM. The greatest advantage to establishing
Colorado residency is a reduction in tuition. To qualify for residency a student must prove that they have
lived in Colorado for one year or more immediately preceding the first day of classes for the semester in
which resident status is sought. Important steps in establishing Colorado residency are obtaining a
Colorado driver’s license, transferring motor vehicle and voter registration to Colorado, and rent receipts
before the first day of classes the first year. Employment and payment of state income taxes are
additional but not essential criteria. There are no absolute requirements for establishing resident status.
The Registrar considers cases on an individual basis. For additional information on establishing in-state
residency consult the “In-State Tuition Classification Status” section in the Bulletin.
FINANCIAL ASSISTANCE
The Department and CSM have designated funds for the support of Teaching Assistants, scholarships,
and fellowships for graduate study. If you did not receive a financial aid offer at admission, there are also
numerous sources of funding outside the school, which students are strongly encouraged to seek. You
can obtain assistance from posted notices of funding opportunities, Office of the Dean of Graduate
Studies, and Department faculty members. Evidence that you have attempted to solve your financial
needs through application for outside grants will be considered in evaluating future requests for
department funds. Financial support is also available for graduate students through the School’s Financial
Aid Office. The American Association of Petroleum Geologists, American Association of University
Women, Colorado Scientific Society, Geological Society of America, Sigma Xi, and Society of Economic
Geologists may have grant opportunities.
AFFIRMATIVE ACTION
For Affirmative Action Policy, Unlawful Discrimination Policy and Complaint Procedure, Sexual
Harassment Policy, Sexual Harassment Complaint Procedure, and Personal Relationships Policy, see the
Policies and Procedures Section in Bulletin.
3
DEPARTMENTAL INFORMATION
Office Personnel
The office staff are here to help, so please feel free to stop by the main office if you need assistance. A
brief description of their duties and some procedures are listed below.
Dorie Chen
1. Departmental accounting
2. Department Head’s correspondence, telephone calls, appointments
3. Purchasing
4. Assists students, professors, other academic and support departments, and administration
5. Equipment check out (LCD projector, laptop)
6. Student employment contracts
7. Department Newsletter
Cheryl Medford
1. Provides information about the Department and school via telephone, email, and public contact.
2. Assists students, general public, professors, other academic and support departments, and
administration
3. Handles all materials and items relating to:
drop/add forms
grade change forms
advisors
maintaining student files
assigning office space
building and room access
4. Processes thesis defense notices and forms5. Assigns rooms for thesis defense
6. Van Tuyl Lecture logistics: schedules speakers, makes their travel arrangements, prepares and
circulates notices, organizes refreshments.
Supplies/Copying for Teaching Assistants (TAs)
1. TAs have use of supplies such as transparencies, pens, pencils, etc., for use only in classes they TA.
The Department does not supply any materials needed for personal use.
2. The majority of class material needing to be reproduced is sent to the CSM Copy Service.
Turnaround time is usually one day. Please see office personnel for proper paperwork and times for
submission of materials or send electronic files directly to the copy center at [email protected].
Spending Money
You, as a student, should NEVER spend your own money to purchase something that your
advisor says will be paid for with school money. You should never buy anything, order
work to be done, or promise payment without getting approval from Dorie. The State can
refuse to reimburse you if you did not follow State purchasing rules! Please talk with Dorie
first.
1. Travel - The school has procedures for traveling as a student at CSM. It is important that you
4
understand them and comply with them. There are preferred travel and car rental agencies to be
utilized (see Appendix). Chrome River is the new way to record the school’s credit card, reimburse
for miscellaneous out of pocket expenses and to request authorization and reimbursement for all
employee travel. This is a paperless system found through the Trailhead site. All reports will be
completed in Chrome River and sent to the approvers through the electronic routing system. All
Faculty, Staff and Graduate Students that are also considered Employees, are required to use Chrome
River for all of the above purposes after approved training, including reimbursements. Trips require
the Travel Authorization (TA) to be submitted PRIOR to the trip if it includes: a) International
Travel; b) Sponsored Research; and/or c) Cash Advance. This is your authorization to go on the trip,
use school funds, and put the school on notice that you are traveling on school business. If something
were to happen to you while traveling on school business and you did not file a TA for the trip, there
is no school responsibility for your travel. This would be especially critical if you were in a foreign
country. The TA should be a fairly accurate estimate of the expenses you expect to incur. The travel
authorization must be submitted by you, then will be forwarded to the person supplying the funding
which will then be forwarded to the Department Head. If the trip is out of the country, the TA will be
forwarded to the Office of International Programs (OIP) for approval. The TA has to be submitted
to OIP 2 weeks before you leave. Reimbursements will be paid from a voucher or petty cash form.
The final part of each trip is filing the Travel Expense (TE). The TE report can be generated from the
TA report if applicable, and details your actual expenses and closes the trip report. Original, detailed
receipts are required to be scanned and uploaded as attachments for all expenses that will be
reimbursed. The TE report needs to be submitted within 20 working days of the trip. Anything after
that could be treated as taxable income. The same electronic routing will follow after the TE is
submitted as for the TA. The School may not reimburse your travel if you do not follow the
procedures. Dorie is always available to answer any questions you have about the procedures.
2. Supplies - Whether these are materials for a lab or research supplies, check with Dorie before
ordering, reserving, promising to buy from a person or company, or buying anything. The State
requires purchases be made with purchase orders or school credit cards. Bring to Dorie complete
information about the vendor (name, address, phone) and a quote of the items to be ordered to begin
the purchase process. Also bring the index number to which the purchases are to be charged. Dorie
has access to on-line ordering that provides school discounts with such suppliers as Fisher Scientific
and VWR. She will place the order.
3. Posters - The Information and Technology Solutions center (I&TS) has poster printing capability.
You will need to take a form to I&TS to pay for the printing. Dorie has these forms. She will need
the index number to which the printing is to be charged.
4. Chemicals - DO NOT ORDER chemicals to be brought onto campus. You must go through
Environmental Health and Safety (EHS) when you need chemicals. They will determine if the
chemical can be brought onto campus. They have some chemicals in stock. If what you need is not
in stock, they will order it. You will need to provide them with an index number. Anyone planning to
use chemicals must attend a training course and get certification from EHS.
5. Registration for meetings - If your advisor is paying for your meeting registration with a grant,
Dorie can pay for it with a credit card. Take the completed forms and the index number to her for
processing. If you pay for the registration yourself and expect to be reimbursed, you cannot be
reimbursed until after the meeting date.
6. Analyses - For off-campus analyses, a purchase order must be in place before you can order them to
be performed. Bring the vendor information, analyses information, and the index number to Dorie so
5
a purchase order can be issued. If the vendor will accept credit card payments, the same information
is needed.
7. Travel Expense Support for Technical Presentation at Professional Meetings – Depending on the
availability of funds, the Department will help defray travel expenses for graduate students whose
abstracts have been accepted for oral or poster session presentation at regional, national, or
international meetings. The Department strongly encourages such professional activities. Written
requests for such support, with supporting documentation, should be submitted to the Department
Head as soon as the abstract has been accepted. The Office of Graduate Studies (OGS) also provides
travel support for professional meetings.
Graduate Student Offices
Graduate student office desk space is allotted each semester and is coordinated by the GE Office. We
attempt to ensure that as many graduate students as possible have office space.
The order of priority is:
1. Teaching Assistants
2. Student Research Assistants
3. Ph.D. Candidates actively working on dissertation
4. M.Sc. Candidates actively working on their thesis
Graduate students may retain their office desk only during the period in which they hold a TA, RA or are
actively engaged in writing their thesis. When no longer entitled to an office, students must vacate the
space making it ready for the next occupant and notify the GE Office personnel that they have vacated. A
list will be maintained of student requests for office desk space in another office area with students more
conducive to their specialty and will be arranged when space becomes available there. It is your
responsibility to keep the office area neat and clean. If the trash bins in the Graduate student office areas
are full, please assist by emptying them. Please remember to keep noise at a minimum as other students in
the office will be studying. After vacating/cleaning an office space, the space will be reallocated by the
GE Office. PLEASE REMEMBER TO BE COGNIZANT, QUIET AND RESPECTUFUL TO YOUR
FELLOW PEERS IN QUIETLY WORKING/ STUDYING IN THESE OFFICE AREAS.
Keys/Blastercards
Blastercards are issued to all students by the school. This Blastercard is required for entry into any
campus building after regular school hours and on weekends. Some laboratories in Berthoud Hall require
Blastercard activation for access. The computer room 222 has Blastercard access. Forms requesting
access to Berthoud Hall and labs are in the main office. Students eligible for office space will be issued a
key to the assigned area.
Mailboxes
Each semester, every active graduate student in the Department is assigned a mailbox located in Room
215 of Berthoud Hall. Graduate students are not to use the Department as their principal mailing address.
The CSM mailroom will not deliver incoming or accept outgoing personal mail. There are tables located
in Room 215 to use as needed as a break room or meeting room along with a refrigerator, microwave, etc.
Before leaving, please be sure to clean the area and appliances you have used. If the recycle bins are full,
please assist by emptying them.
6
Departmental Computer Facilities
The student Computer Labs are located in Berthoud Hall rooms 201 and 222. A network account
agreement is required before you can obtain access. These forms are in the main office. Office personnel
will supply paper and printer cartridges for computer labs.
Room 222 is reserved exclusively for student use. Room 201 is a teaching and short course lab. Pre-
approved scheduling controls use of room 201. When not in use for classes or short courses, it is available
for student use. We have many sophisticated geologic applications and special hardware items such as a
slide scanner and a flat-bed scanner. In addition, all computers have CD-burners.
Room 203 is reserved exclusively for students (both undergraduate and graduate) working on research
projects requiring the use of high-end workstations with advanced graphics cards. The workstations run a
suite of programs dedicated to sub-surface analysis. Access to Room 203 is controlled through a
Blastercard swipe key with approval by Dr. Alexei Milkov, Dr. Bruce Trudgill, Dr. Steve Sonnenberg, or
Lesli Wood.
A few simple rules must be followed to ensure these resources will remain available.
1. Clean up after yourself. Do not abuse the Department’s Computing Labs.
2. No food or open liquid containers are allowed in the computer labs room 201 & 222. Only closed/
secure drinkware allowed.
3. Pets are not allowed in Berthoud Hall as per CSM rules.
4. Do not change any files or settings on the computers.
5. Do not add, move, or remove any hardware. Exercise extra care with network cables. They are
fragile and you may cause the system to crash if tampered with or moved.
6. If you have problems with lab computers or your computer account, fill out a trouble ticket for
I&TS at http://helpdesk.mines.edu requesting assistance. The lab computers hold labels with a
CSM number to relay to I&TS.
7. Computers and printers remain on at all times. DO NOT TURN THEM OFF.
8. The Department has a policy in place for software compliance. Do not copy or install any
software to or from workstations or the network. If specific software is required that we do not
have, discuss implementation with the Department Staff. We must have licenses, original media
and supporting documentation for all installed software. Software is only updated twice a year.
9. Printing costs for the Department are high. Students will be allotted 500 pages annually free of
charge. Once that limit has been reached, payment will have to be made to have printing
privileges at a price of 5 cents per page. Payment is made to Dorie.
Room 222 is reserved exclusively for student use. Room 201 is a teaching and short course lab.
Pre-approved scheduling controls use of room 201. When not in use for classes or short courses,
it is available for student use.
PLEASE REMEMBER THAT THERE ARE SEVERAL STUDENTS (especially at the end of
the semester) THAT ARE IN NEED OF AND USING THE COMPUTER LABS. WHEN YOU
LEAVE THE COMPUTER LAB(S), PLEASE CLEAN UP YOUR COMPUTER DESK AREA
OF ALL OF YOUR ITEMS SO OTHER STUDENTS WILL BE ALLOWED TO USE THE
COMPUTER STATION (these areas are not for personal storage).
THANKS!
7
This computer network is a result of the Department’s commitment to the use of computer technology in
the geosciences and is supported by Department money as well as your technology fee. Please treat the
system accordingly and understand that most hardware replacements, repairs, and software upgrades are
paid for directly by the Department. Money conserved on repairs and replacements can be applied toward
new purchases, so it is in your best interest to take care of these computers as if they were your own.
I&TS
Information and Technology Solutions provides computing and networking infrastructure and resources
for CSM. Staff members serve as a resource to students as they conduct their studies.
Most computer systems are connected to the campus network and have access to the Internet and campus
library resources. Black and white and color printing is available as well as poster printing and
transparencies; check with the Help Desk (156A) in the Computer Commons at the Center for
Technology and Learning Media (CTLM) for current charges.
All students need to establish a CSM e-mail and ADIT account. You may create personal web pages. An
assortment of computer-based training courses is available. Virus protection and personal firewall
software is available through the CCIT web page free of charge to registered students.
Use of Laboratories and Equipment
Classrooms are equipped with computers and LCD projectors. If needed, the Department has a LCD
projector that can be reserved through the main office. If this equipment is unavailable from the
Department, the Computing Center might be able to supply it
Use of various laboratories is monitored by the faculty and/or staff member in charge of each facility.
Access to, and use of, these facilities is granted by Department assistants upon written permission from
the responsible faculty/staff member. Students must demonstrate their ability to operate specific
laboratory equipment independently before receiving access to that laboratory. Questions regarding use
of any lab should be directed to the designated person listed below. For a listing of analytical equipment
descriptions, please see the appendix. Mandatory hazardous waste training conducted by the
Environmental Health and Safety Office needs to be taken by all students.
Lab Location Responsible Person
Automated Mineralogy Room 118/119 Katharina Pfaff
Carbon Coater Room 118 Katharina Pfaff
FE-SEM Room 116 Katharina Pfaff/Thomas Monecke
Field pH Meters Room 301 Rick Sarg
Fluid Inclusion/
Cathodoluminescence Room 111 Thomas Monecke
Franz Magnetic Separator,
heavy liquids and picking
microscope Room 147C Yvette Kuiper
Gas Mixing Furnace Room 407 Ric Wendlandt
General Chemistry
Fluid-rock Interaction Room 406 Alexis Sitchler/ Alexander Gysi
Geomechanics Room 303 Paul Santi
Geotech sample testing equip. Garage Paul Santi
High Pressure Room 407 Ric Wendlandt
8
Isotope Sample Prep Room 301A Susann Stolze
Jaw Crusher, Disk mill
Ring mill Room 147D Yvette Kuiper/Thomas Monecke
Lab Space Room 301A Alexis Sitchler/ Rick Sarg
Mass Spectrometer/Isotope Room 404 Susann Stolze
Microscope Lab Room 401B Thomas Monecke/Ric Wendlandt/Yvette Kuiper
Mineral Separation Lab Room 406B Thomas Monecke
Optical Mineralogy Room 401 Ric Wendlandt
Sample examination Room 110 Thomas Monecke/Alex Gysi/ Elizabeth Holley
Source Rock Analyzer Room 301B Steve Sonnenberg
Thin Section/Sample Prep Room 147 Jae Erickson
Wilfley ‘wet-shaking’ table Room 147E Yvette Kuiper
X-Ray Diffractometer Room 405 Ric Wendlandt
Brunton compasses, Jacob’s staffs, and measuring tapes can be checked out from Jae Erickson in room
147. The Department has a limited number of hard hats that can be checked out along with safety vests
and traffic cones. See Jae about this equipment.
Lab and Work Request Procedures
Thin Section Lab Jae Erickson operates the thin section lab in Room 147 of Berthoud Hall. Jae will cut, polish, and stain
thin sections. Check with him if special processing of thin sections is needed. All submissions of
samples for thin section processing require a thin section request form found on the departmental thin
section laboratory website. For a thesis that requires petrographic work, a signed form from the advisor
will be required for processing thin sections.
The following analytical preparation procedures can be accomplished in the Thin Section Lab:
Sample cutting
Sample polishing
Production of petrographic thin sections
Production of polished thin sections
Staining of thin sections
Impregnation of thin sections
The standard method for graduate students to request any of the above procedures involve the following
steps:
1. Meet with thesis advisor to discuss an overall plan with respect to analytical procedures to be
used for samples.
2. Obtain a “Thin Section Request Form” from the Thin Section Laboratory site, complete it by
identifying the specific procedures to be followed, listing all samples by number, and have your
thesis advisor sign the form.
3. Take samples to Jae Erickson and discuss with him the form request, specific procedures, timing,
and costs.
Graduate students are allowed to use the equipment in the Thin Section Lab after proper training.
Students should set up a training session time with Jae Erickson. After the student is trained on a piece of
equipment, they can use the equipment during laboratory operating hours while the lab coordinator is
present.
9
Policies and Procedures for using Geochemistry Labs in Berthoud 406
Student and faculty users of the Geochemistry Labs (Berthoud Hall 406) are required to adhere to policies
and procedures that create a collegial work environment and that ensure the safety of all users. The
following policies have been developed to be in compliance with school-wide chemical hygiene policies
administered by Environmental Health and Safety (EHS).
Each lab in Berthoud 406 has a Lab Supervisor and permission to use facilities in these areas should go
through these individuals:
406 main lab and 406Aresearch lab – Alexis Sitchler/Alexander Gysi
406B – research lab - Thomas Monecke
In general, use will be granted for the 406 main lab only unless you are collaborating with one of the
faculty who supervise the research labs 406 A and B.
The Department Head assumes overall responsibility for adherence to safety policies and procedures in all
labs.
Because our general-purpose geochemistry lab (406) is small and serves diverse teaching as well as
research needs, we have to enforce the access and equipment policies listed below:
Priority for student use of general lab space in 406 is as follows:
o Teaching
o Students/post-docs on funded grants advised by GE Faculty
o Students/post-docs without funding advised by GE Faculty
o Other users
Completion of EHS Safety and Hazardous Materials training is required prior to working in the
lab.
Faculty members are expected to provide all the equipment, chemicals, and other supplies needed
by their project. Small amounts of general purpose glassware and a drying oven are available for
communal use, however specialized equipment and necessary supplies, including refrigerator
space exceeding about ½ shelf, must be obtained by individual investigators.
There are sources of de-ionized water in BH404 and 406. Please check with Dr. Stolze regarding
use of the water in BH404 or with Dr. Sitchler and Dr. Gysi for use of the de-ionized water in
BH406.
Each individual must maintain a safe environment that does not present a hazard to other lab
users, particularly when a work area is left unattended, when experiments are in progress, and
after completion of experiments.
All users will execute an agreement, signed by the user, faculty advisor (or faculty sponsor in the
case of post-docs and visitors), and the lab supervisor, which will include the particular details of
their lab use. This agreement allows the Department to have accurate records of the types and
locations of chemicals, their hazards, and appropriate disposal, ensures that EHS and each Lab
Supervisor conducts proper user training, ensures that users are fully aware of the health and
safety issues pertaining to their research, and emphasizes the shared responsibilities of students,
advisors, and lab supervisors. In the case of students, this agreement will include a check-out
10
procedure that must be completed when the work is completed and prior to graduation. A copy of
this agreement will be placed on file in the lab being used.
Oversight of all aspects of student (undergraduate and graduate) use of the lab by faculty advisors
is required.
Depending on the duration of the requested lab work, Blastercard access to BH406 may or may
not be granted.
Faculty hosting visitors on sabbatical leave are responsible for checking lab space availability
before the visitor arrives and confirming that lab supervisors are willing to conduct necessary
training and oversight of the visitor.
Laboratory Safety Training Provided by EHS
Graduate Student Safety Seminar (Mandatory). All incoming graduate students who work in
laboratories and shops are required to attend. EHS provides the training on two occasions at the
beginning of each semester. The presentation takes about 60 minutes.
Hazardous Materials Training (Mandatory). All campus personnel who procure regulated
materials or who generate regulated chemical waste must attend this training on an annual basis.
This includes faculty members, staff members, graduate students and some undergraduate
students. This training is required by federal and state law and is offered by the EHS Department
at the beginning of each semester. The EHS Department maintains a list of persons who have
received the training within the last year and are thereby "authorized" to handle regulated
materials. Unauthorized persons who request chemical procurement or waste disposal service are
notified that service has been denied because their training is no longer current.
Hazard Communication in Laboratories. The Occupational Safety and Health Administration
prescribes the implementation of a "Chemical Hygiene Program" for laboratories. A primary
component of this program is "Hazard Communication." This means that all personnel should be
informed of the properties of hazardous materials in the lab and should be informed of hazards
and safety procedures associated with lab equipment and processes. One of the ways this is done
at CSM is by posting MSDS information sheets on a clipboard that is mounted in the hallway
outside each lab. Most CSM labs have such clipboards. The CSM Safety Officer checks the
accuracy of laboratory MSDS files during annual building inspections. In addition, each time the
EHS Department issues a chemical from our Central Storage and Distribution Facility, the
recipient is reminded to review the MSDS for the chemical. If the recipient does not have an
MSDS, one is provided.
Radiation Safety Training (Mandatory). Faculty members and graduate students who wish to be
qualified to independently handle licensed radioactive material must attend a 10-hour Radiation
Safety Course. The course is offered by the Radiation Safety Officer each semester. Faculty
supervisors of radiation-producing equipment (X-ray machines) are responsible to provide
training for users of such equipment.
11
GRADUATE STUDENT ORGANIZATIONS
The American Association of Petroleum Geologists (AAPG), Association of Environmental Engineering
Geologists (AEG), and Society of Economic Geologists (SEG) all have student chapters on campus. New
students are encouraged to become involved in the activities of these groups. It is a great way to make
contacts, learn useful information about the Department and help shape your life and studies at CSM.
AEG is open to students in disciplines related to engineering geology, geological engineering,
and hydrogeology. The purpose of the organization is to promote activities that expand the
experience and knowledge of the student members in these disciplines. Monthly meetings,
which feature speakers from industry and government, are held along with field trips and social
events.
Any student studying the geological sciences is eligible for membership in SEG. Purposes of the
Society are to encourage increased knowledge of geology and its application to mining and
mineral deposits, to promote professionalism and provide opportunities to meet geological
professionals in the mining industry. Activities include technical speakers, field trips, and social
events.
The student chapter of AAPG is open to any student majoring in geology. The purpose of the
chapter is to advance the science of geology, especially as it relates to petroleum and natural gas
and to promote and maintain a high standard of professional conduct. Activities include
speakers, field trips, and social events.
GENERAL REQUIREMENTS FOR GEOLOGY AND GEOLOGICAL ENGINEERING
GRADUATE DEGREE PROGRAMS
Introduction
Graduate students must meet a number of responsibilities and fulfill certain requirements during their
degree program. This section presents these requirements, deadlines, and suggested guidelines for
completing these responsibilities. A two-year Master’s program is possible, but only if these deadlines
and guidelines are followed closely. The duration of Ph.D. programs is more variable. Examples of the
forms referred to below are included in the Appendix. Please go to the Graduate School website for the
most current forms as they are revised and upgraded periodically AND PLEASE USE THE FIELD
DROP DOWNS TO SELECT THE APPROPRIATE CATEGORY!
Registration
Registration requirements include the following:
1. Continuing students should preregister to insure that a class will have sufficient enrollment to be held.
Without sufficient enrollment classes may be dropped – it is in your best interest to pre-register! The
Department expects students to register before classes begin each semester. This permits the
Department to make final decisions on classes and teaching assignments and permits you to begin
classes in an orderly manner. Timely registration permits the school to acquire state funds that are
reflected in financial aid to students and the Department. Graduate students who have not
registered before the School’s registration deadline (see Registrar’s academic calendar-
http://inside.mines.edu/Registrars_Office), will be assessed a $100 late fee.
2. Payment of tuition and fees.
Full-Time Student Hour Requirements
12
To be deemed full-time during the fall and spring semesters, students must register for 9 or more hours of
course and/or research credit. However, international students need only register for 6 credit hours per
semester during their first year if they are required to take special language instruction or are accepted in
Provisional Status. In the event a thesis-based student has completed his or her required course work and
research credits (36 hours for master’s students and 72 hours for doctoral students) and is approved for
reduced, full-time registration, the student will be deemed full-time if he/she is registered for at least 4
hours of research credit.
Eligibility for Reduced Registration
In order to be considered for the reduced, full-time registration category, and apply to graduate in
Trailhead students must satisfy the following requirements:
For M.Sc./M.Engr. students, completion of 36 hours of course and research credit hours
combined and paid for 27 credits (Paid credits = 1-9 credits per semester. Credits 10-15 are
charged the same as 9 credits and are therefore not considered paid credits); A Degree Audit form
must be submitted by either November 1st to graduate in May or qualify for reduced registration
for the spring semester, March 1st to graduate in August or May 1st to graduate in December or
qualify for reduced registration in the fall.
For Ph.D. students, completion of 72 hours of course and research credit hours combined and
paid for 54 credits (Paid credits = 1-9 credits per semester. Credits 10-15 are charged the same as
9 credits and are therefore not considered paid credits). At least 24 of the hours must be research
credit hours and at least 36 must be course credit hours. Students who enter the PhD program
with a thesis-based Master’s degree may transfer up to 36 semester hours in recognition of the
course work and research completed for that degree (up to 24 of these semester hours can come
from previous graduate-level course work). A Degree Audit form must be submitted by either
November 1st to graduate in May or qualify for reduced registration for the spring, March lst to
graduate in August or May 1st to graduate in December or qualify for reduced registration in the
fall; An Admission to Candidacy form must be submitted 2 weeks prior to census day of the
semester in which they want to apply to graduate and/or be considered eligible for reduced
registration (or earlier).
Registration Requirements – Reduced Registration How to Qualify
Reduced registration allows students who have completed all the credits towards a degree, but still need
to continue to work on research to complete a thesis, to register part time, but maintain full time student
status.
Students on reduced registration do not get reduced tuition
Students on reduced registration pay for the number of credits registered
Reduced registration will benefit students in the following categories who need to be considered full-time
students:
International students
Students on RA/TA contracts, hourly contracts or fellowships
Students on financial aid or wishing to defer financial aid payments
To qualify students must:
Be admitted into a Master’s thesis or PhD program
13
Have submitted the required forms
Meet credit hour requirements
MS THESIS STUDENTS (students must meet all requirements to qualify):
1. Submit Degree Audit form (must have approved committee form on file with OGS) and indicate on
the form that they want to be on Reduced Registration by:
May 1 for fall semester reduced registration
November 1 for spring semester reduced registration
2. Master’s students must have earned 36 hours of course and research credits combined and have
paid for 27 credits*. These credits may include any transfer credits a student is using towards the
degree.
PHD STUDENTS (students must meet all requirements to qualify):
1. Submit Degree Audit form (must have approved committee form on file with OGS) and indicate on
the form that they want to be on Reduced Registration by:
May 1 for fall semester reduced registration
November 1 for spring semester reduced registration
2. Submit Admission to Candidacy form by the first day of class for the semester in which the
student wants to be on Reduced Registration. Students must meet all institutional and
departmental requirements for candidacy before the department will sign this form.
3. Ph.D. students must have earned 72 hours of course and research credits combined and have
paid for 54 credits*. These credits may include any transfer credits a student is using towards the
degree.
*Paid credits are any credits 1-9 per semester. Credits 10-15 are considered free credits,because the student is not charged any additional tuition and fees. So, when counting paid credits you may only count a maximum of 9 credits per semester, even if the student took more than 9 credits.
Reduced Registration Credit Calculator Once a student qualifies for Reduced Registration, the student must register correctly. Students who
qualify for Reduced Registration, but fail to register correctly will not be put on Reduced Registration.
All students who qualify for Reduced Registration will receive an email with registration instructions. If a
student doesn’t get an email, but thinks (s)he should qualify, the student must contact the OGS at
[email protected]. Students who register for 4 credits, but are not eligible and or are not on the
reduced registration list will not be put on reduced registration and will be considered “less than half-
time” students.
Leave of Absence
14
Leave of absence will be granted only when unanticipated circumstances make it temporarily impossible
for students to continue to work toward a degree. Students may take up to 2, not necessarily consecutive
semesters of leave. Any request for a leave of absence must have the prior approval of the student’s
faculty advisor, the Department Head, and the Dean of Graduate Studies. The request for a leave of
absence must be applied for in writing and must include (1) the reasons why the student must interrupt his
or her studies and (2) a plan (including a timeline and deadline) for resuming and completing the work
toward the degree in a timely fashion. Thesis-based students may not do any work related to their thesis
and may not discuss their thesis with their faculty advisor while on a leave of absence. Students who
wish to return to graduate studies after an unauthorized leave of absence must apply for readmission and
pay a $200 readmission fee.
Grade Point Average
A cumulative GPA of 3.0 out of 4.0 must be maintained. Failure to maintain a 3.0 GPA will result in
academic probation. Students failing to attain a 3.0 GPA by the end of a semester during which they are
on probation are subject to suspension. Credit will be given for a grade of “C”, however, a GPA of 3.0 or
higher must be maintained. Graduate credit will not be given for courses in which grades less than “C”
were received.
Transfer Credits
Transfer credits from other universities or credits from non-degree programs at CSM must be approved
by the student’s committee and the Graduate Dean. Only courses in which a grade of “B” or better was
received may be considered for transfer. Transfer credits from other universities will not be used in
calculation of a student’s GPA. A maximum of 9 hours, which were not counted toward any other
awarded degree, can be transferred into a Master degree program. Students who enter the PhD
program with a thesis-based Master’s degree may transfer up to 36 semester hours in recognition
of the course work and research completed for that degree (up to 24 of these semester hours can
come from previous graduate-level course work). No more than 9 hours taken as a CSM non-degree
student can be transferred and no more than 3 of these units can be 400-level. The remainder must be
graduate level.
Progress Grades
A student may receive a grade of In Progress-Satisfactory or In Progress-Unsatisfactory (PRG or PRU)
for a course or research hours. An In Progress grade indicates that the work is not complete. Progress
towards successful completion of a graduate degree shall be deemed unsatisfactory if any of the following
conditions occur: failure to maintain a cumulative grade point average of 3.0 or greater or receipt of an In
Progress-Unsatisfactory for research hours. Upon the second occurrence of an unsatisfactory progress
indication, the Dean shall notify the student that he or she is subject to discretionary dismissal according
to the “Unsatisfactory Academic Performance” section listed in the Bulletin.
Incomplete Grades
If a graduate student fails to complete a course because of illness or other reasonable excuse, the student
receives a grade of Incomplete. The grade INC indicates deficiency in quantity of work and is temporary.
A graduate student must remove all incomplete grades within the first four weeks of the first semester of
attendance following that in which the grade was received. If not removed within the four weeks, the
Incomplete will become an F.
15
Deficiencies
Students with an insufficient background in a particular area of geology or related science will be notified
at the time of acceptance. They will be required to take appropriate courses to satisfy these deficiencies
as approved by their committee and maintain a B average in any deficiency course. No graduate credit
will be received for these courses. Any student receiving a “D” in a deficiency course will be required to
repeat the course. Deficiencies should be removed as soon as possible after enrollment. Deficiency
courses may be taken at a school other than CSM if approved by the student’s advisor.
Research/Thesis Committees
Students pursuing degrees should choose a research or thesis advisor and thesis committee by the end of
their second semester by meeting with faculty members who are interested in appropriate research topics.
All thesis-based students are required to have a thesis advisor and committee while non-thesis based
students require a research advisor only. A research advisor/thesis advisor and committee form is
available online (https://www.mines.edu/graduate-studies/forms/advisorthesis-committee/). On the thesis
committee and assignment request form you can use the drop downs to note what your program and
degree is and type in the committee members’ names, the department head’s name spelling out Dr.
Wendy Bohrson. The advisor and committee members must sign the form. It should be submitted to
Cheryl or Dorie who will present it for approval by the Department Head before submission to the
Graduate School. An approved copy of the form will be returned to student. The purpose of a research
advisor or thesis committee is to monitor progress of courses and research/thesis work. Meetings between
student and research advisor or thesis committee should be arranged as needed and should be no less than
one per semester. It is most important that the student and research advisor or thesis committee stay
closely in touch to prevent any miscommunication or misinterpretation of work to be done and progress
to be made. It is up to the student to schedule all meetings. The research advisor or thesis committee will
oversee the student’s entire graduate program including transfer of credits, elimination of deficiencies,
course of study, and in the case of a thesis-based program, thesis proposal, thesis research, and thesis
defense.
Thesis advisors must be members of the Department. Tenured or tenure-track faculty may advise
graduate students. Research faculty members may co-advise graduate students with a Department tenured
or tenure-track faculty member or may serve as a thesis advisor if they meet minimum requirements listed
below and have been approved by the Department Head. Research faculty members wishing to serve as
graduate advisors, as a minimum must have 1) served as co-advisor (through completion of degree) to at
least one thesis-based CSM graduate student, 2) a record of on-going relevant research, and 3) a full-time
presence in the Department. The Research faculty member may apply for advisor status with a
recommendation by the Department Head. All graduate committees are subject to approval by the
Department Head and the Dean of the Graduate School.
A minimum of three faculty members constitute a M.Sc. committee; two members must be full time
faculty from the home department. At least one member of the committee must be a tenured or tenure-
track CSM faculty and will serve as the “committee chair” (do not need to specify on form). Additional
members, such as non-CSM personnel, may be included on the committee. Off-campus members have
the option of voting or non-voting (ex officio) status. Voting members have all responsibilities of
academic members, including advising on technical matters, reading and critiquing the thesis, attending
committee meetings, the qualifying examination, and the defense of dissertation. A brief resume for off-
campus committee members who hold voting status on the committee is required and must be attached to
the initial thesis committee form. Faculty and others outside the Department may serve as co-advisors.
In the use of a co-advisor, the required number of committee members is increased by one.
16
For a Ph.D. dissertation committee, there must be a minimum of four full time faculty members; at least
two members from the home or allied departments, and at least one (tenured/tenure-track) member
outside the home or allied department recommended by the student and advisor(s). Individual
committees can be established with more than four members. A majority of the voting members of the
committee must be tenured or tenure-track CSM faculty members. The required committee chair is the
fourth member. Additional members, such as non-CSM personnel, may be included on the committee.
Off-campus members have the option of voting or non-voting (ex officio) status. Voting members have
all responsibilities of academic members, including advising on technical matters, reading and critiquing
the dissertation, attending committee meetings, the qualifying examination, and the defense of
dissertation. A brief resume for off-campus committee members who hold voting status on the committee
is required and must be attached to the initial thesis committee form. Faculty and others outside the
Department may serve as co-advisors. If a co-advisor is appointed, the required number of committee
members is increased by one.
Qualifying Examinations
Ph.D. students must pass qualifying examinations by the end of the second year of their programs. This
timing may be adjusted for part-time students. The examination will be administered by the student’s
doctoral committee and will consist of an oral and a written examination administered in a format to be
determined by the student’s doctoral committee. Two negative votes by the doctoral committee constitute
failure of the examination.
In case of failure of the qualifying examination, a re-examination may be given upon the recommendation
of the doctoral committee and approval of the Graduate Dean. Only one re-examination may be given.
Degree Audit and Admission to Candidacy
Forms:
All Masters (including non-thesis) and PhD students are required to submit a Degree Audit form for a
degree plan. The Admission to Candidacy form confirms that a PhD candidate has completed the PhD
qualifying process and is admitted into candidacy.
To be eligible to apply to graduate in Trailhead and be eligible for reduced registration:
Master’s students:
o Need to submit the Degree Audit form by the posted deadline (see below)
PhD students:
o Need to submit the Degree Audit form by the posted deadline (below)
AND
o Need to submit the Admission to Candidacy form 2 weeks prior to census day of the
semester in which they want to be considered eligible for reduced registration (or earlier).
Degree Audit form deadlines are:
November 1st to graduate in May
April 15 to graduate in August
May 1st to graduate in December.
17
These deadlines are the same as OGS use to require for the complete Degree Audit and Admission to
Candidacy form.
Prior to submitting a Degree Audit and/ or Admission to Candidacy form there must be a thesis
committee on record with the Grad Office and Department. All degree thesis candidates must submit a
Degree Audit by completing all prerequisites and core curriculum course requirements. For thesis-based
students, the form must be submitted within the first calendar year after enrolling in the Master degree
program and within the first two calendar years in the Ph.D. program. Admission to Candidacy must be
granted before the student is permitted to defend his/her Ph.D. thesis. In order to meet graduation
deadlines, the form must be submitted by the dates listed on the OGS webpage.
The Degree Audit application must be reviewed and approved by the committee research advisor and
should contain a complete list of courses (completed, in progress, and proposed) being used toward the
degree. This includes transfer courses and 400 level courses (if applicable) along with 500/600 level
courses used to satisfy requirements for the degree. Upon approval by the Department Head, the form is
submitted to the Graduate Dean for agreement. Any changes in the course program listed on the Degree
Audit form must be re-approved by the thesis committee or research advisor and Graduate Dean. The
advisor and committee members must sign the form. It should be submitted to Cheryl or Dorie who will
present it for approval by the Department Head before submission to the Graduate School. An approved
copy of the form will be returned to student.
Non-Thesis Procedures
When the non-thesis degree student student applies to graduate in Trailhead, OGS will enroll students in a
CANVAS Checkout Course. Students must complete the following: accept course invitation and
complete 100% of the course by 5pm on the Check-out Course Completion Deadline listed on the OGS
webpage.
Thesis and Dissertation Procedures
Each candidate for the thesis-based M.Sc. or Ph.D. degree will be required to write a thesis acceptable to
the committee and Department. The thesis must show original research of excellent quality in a suitable
technical field and must exhibit satisfactory literary merit. The subject of the thesis is selected by mutual
agreement between the candidate and the advisor and/or co-advisor, if applicable. Any major change in
the scope of the research requires the approval of the thesis committee. It is the responsibility of the
advisor or co-advisor to supervise the research and to consult with other members of the thesis committee
on the progress of the work. During the final semester of the program, each candidate must pass an oral
defense of the thesis that may cover course work as well as the thesis topic. Format instructions are
available in the Graduate Office and should be obtained before beginning to write the thesis.
Proposal
A thesis or dissertation proposal is required of all candidates for the purpose of (1) defining the scope of
the proposed research and (2) to permit the thesis committee to determine the suitability of the research
for a graduate thesis. The proposal should be approved by the thesis committee prior to the start of
significant work on the project.
The proposal should stress the original research involved and follow the general outline listed below:
1. Title
2. Objectives and purpose
18
3. Thesis area location
4. Scope of research
5. Previous research of record
6. Description of proposed research
7. Schedule for completion of proposed research
8. Budget and funding source
9. Course schedule (including deficiencies, qualifying exam courses, and completed
courses)
10. Written release for public disclosure of results (when outside funding is involved).
An outline for the thesis proposal should first be submitted to the thesis advisor for approval prior to
writing and formal submission of the proposal itself. The proposal should be written in a concise format.
The thesis committee will review the proposal and may suggest changes. After committee approval, a
copy must be placed in the student’s file.
Budget
Thesis/dissertation research (travel, living expenses, analysis, thin sections, etc.) costs can be significant.
It is the responsibility of the student to develop a budget and plan for financial support prior to committee
approval of the proposal. Individual faculty members or the Department may, in some cases, be able to
provide assistance in securing support.
Proprietary Research
Under special circumstances, the School may enter into an agreement with a sponsor to include
proprietary research in a graduate student’s thesis or dissertation. The nature and extent of proprietary
research reported in the thesis or dissertation must be agreed upon in writing by the sponsor, principal
investigator, student, and Dean of Graduate Studies. The thesis defense will remain open to the public.
Denial of public access to the written thesis will be limited to a maximum of twelve months from the date
of submittal of the Thesis Defense form to the Dean of Graduate Studies.
Manuscript Preparation
An “ideal” sequence for draft preparation and review is as follows. The student, in conjunction with the
advisor, prepares an initial outline of the thesis. This outline is developed into a draft following the
Graduate Studies thesis writer’s guide (https://www.mines.edu/graduate-studies/thesis-writers-guide/)
(including all figures, tables, and plates), which is submitted to the thesis advisor and/or co-advisor, if
applicable, for the first review. Students must follow the Step by Step Thesis Guide procedures at the
Graduate School website. After the first draft has been returned to the student, a second draft is prepared
which incorporates the revisions, corrections, and suggestions made on the draft. Upon approval of a
defensible draft, the student may schedule a defense. Copies of the thesis should be submitted to
committee members at least two weeks prior to the defense. Further revisions may be required as a result
of the defense. After, the student must follow any edits and formatting needed for final approval by the
Graduate Studies Office.
Thesis and Dissertation Defense
The defense must be open to the public and should occur at least one week after public notification of the
scheduled defense date. Following the satisfactory defense of the thesis, the student will complete any
revisions specified by the thesis committee and, after approval by the advisor, submit it to the Department
19
Head for signature before submitting the final copy to the Graduate Office for format approval. See Grad
School Guidelines.
Two negative votes from the thesis committee constitute failure of the oral defense regardless of the
number of committee members present at the defense. At the discretion of the thesis committee, a second
oral defense of dissertation may be scheduled. A second failure to defend the dissertation satisfactorily
constitutes automatic, irrevocable termination of the graduate program. In either case of pass or fail,
members voting in the negative may file a report on why they voted to fail. In the case of failure, the
Chair of the Thesis Committee will prepare a written statement indicating the reasons for failure of the
defense and will provide copies to the student, Thesis Committee, the Department Head, and the Graduate
Dean.
Graduation Deadlines Please view the current deadlines calendar located on the OGS website
https://www.mines.edu/graduate-studies/graduation-deadlines/
Students must complete the following steps by the stated deadlines in order to defend their thesis
and graduate at the end of a semester. The defense is scheduled via the Thesis Defense Request
form (form obtained from the OGS website = https://www.mines.edu/graduate-studies/forms/)
and signed by all committee members showing their approval to meet at the agreed upon time and
date. Submit the completed form to Cheryl Medford, at least one week in advance of the thesis
defense date. She will assign a room for the defense and will send announcements of the defense
to committee members, the student, and post the notice on the lecture board. When the student
applies to graduate in Trailhead, OGS will enroll students in a CANVAS Checkout Course.
Students must complete the following: accept course invitation and complete Module #1 prior to
thesis defense to obtain Thesis Defense Form to take to the defense. Students must complete
100% of the course by 5pm on the Upload and Check-out Course Completion Formatting
Approval Deadlines.
Graduation Checklists & Deadlines (see Calendars in Appendix)
December 2019 Graduation Commencement: Friday, December 13, 2019
Forms to Submit Prior to Applying to Graduate:
Prior to May 1, 2019: Master’s thesis and PhDs must submit Committee form
May 1, 2019: All graduate students must submit Degree Audit form by 5:00 p.m.
August 20, 2019: PhDs must submit Admission to Candidacy form by 5:00 p.m.
EARLY CHECK-OUT CHECKLIST AND DEADLINES
Student must have been registered for summer 2019 credits
Student does not need to register for fall 2019 credits
August 23, 2019: All students must apply to graduate in Trailhead
-Students may only apply after all the forms above have been processed.
-After students apply to graduate in Trailhead, students will enroll the student in a
CANVAS Graduation Check-Out Course
-Enrollment dates can be found at: Steps to Graduation
Non-Thesis Students:
September 4, 2019: Complete Graduation Check-Out Course in CANVAS
Thesis Students
August 27, 2019: Complete Graduation Check-Out Course in CANVAS by 5:00 p.m.
20
August 27, 2019: Submit signed Thesis Defense Form to the Registrar’s Office by 5:00 p.m.
-Thesis Defense Form is available only at the end of the 1st quiz in the Graduation
Check-Out Course
-Thesis Defense Form should only be signed after the student has passed the defense &
all content revisions have been approved.
August 27, 2019: Upload thesis in ProQuest 11:59 p.m.
-Only after you have completed all the steps above, will the format review begin
September 4, 2019: Thesis Formatting Approval by 1:00 p.m.
-Students must complete the CANVAS course titled Thesis Writer’s Workshop
-OR-
-Use the Latex template on the Graduate Studies website (do not create your own
template)
Early Check-Out degrees will be awarded December 16, 2019 – January 6, 2020
Students checking out early to graduate in December may walk in December commencement ceremony
STANDARD CHECK-OUT CHECKLIST AND DEADLINES
Student must be registered for fall 2019 credits
September 4, 2019: All students in all degree programs must apply to graduate in Trailhead
-Students may only apply after all the forms above have been processed by OGS.
-After students apply to graduate in Trailhead, OGS will enroll the student in a CANVAS
Graduation Check-Out Course
-Enrollment dates can be found at: Steps to Graduation
Master’s Non-Thesis Standard Checkout
November 8, 2019: Graduation Check-Out Course Completion in CANVAS by 5:00 p.m.
Master’s Thesis Standard Checkout
November 18, 2019: Complete Graduation Check-Out Course in CANVAS by 5:00 p.m.
November 18, 2019: Submit signed Thesis Defense Form to the Registrar’s Office by 5:00 p.m.
-Thesis Defense Form is available only at the end of the 1st quiz in the Graduation
Check-Out Course
-Thesis Defense Form should only be signed after the student has defended, passed the
defense and all revisions have been approved.
November 18, 2019: Upload thesis in ProQuest by 11:59 p.m.
-Only after you have completed all the steps above, will the format review begin
November 22, 2019: Thesis Formatting Approval by 1:00 p.m.
-Students must complete the CANVAS course titled Thesis Writer’s Workshop
-OR-
-Use the Latex template on the Graduate Studies website (do not create your own
template)
PHD Standard Checkout
November 11, 2019: Complete Graduation Check-Out Course in CANVAS by 5:00 p.m.
November 11, 2019: Submit signed Thesis Defense Form to the Registrar’s Office by 5:00 p.m.
-Thesis Defense Form is available only at the end of the 1st quiz in the Graduation
Check-Out Course
21
-Thesis Defense Form should only be signed after the student has defended, passed the
defense and all revisions have been approved
November 11, 2019:Upload thesis in ProQuest by 11:59 p.m.
-Only after you have completed all the steps above, will the format review begin
November 15, 2019: Thesis Formatting Approval by 1:00 p.m.
-Students must complete the CANVAS course titled Thesis Writer’s Workshop
-OR-
-Use the Latex template on the Graduate Studies website (do not create your own
template)
Standard Check-Out degrees will be awarded December 16, 2019- January 6, 2020
Students may walk in December commencement ceremony
May 2020 Graduation Commencement: May 7, 2020
Forms Needed to Apply to Graduate
Prior to November 1, 2019: Master’s thesis and PhDs must submit an Advisor/Committee
form
November 1, 2019: All graduate students must submit Degree Audit form by 5:00 p.m.
January 7, 2020: PhDs must submit Admission to Candidacy form by 5:00 p.m.
EARLY CHECK-OUT CHECKLIST AND DEADLINES
Student must have been registered for fall 2019 credits
Student does not need to register for spring 2020 credits
January 10, 2020: All students must apply to graduate in Trailhead
–Students may only apply after all the forms above have been processed.
-After students apply to graduate in Trailhead, students will be enrolled the student in a
CANVAS Graduation Check-Out Course
-Enrollment dates can be found at: Steps to Graduation
Non-Thesis Students
January 22, 2020: Complete the Graduation Check-Out Course by 5:00 p.m
Thesis Students
January 15, 2020: Complete Graduation Check-Out Course in CANVAS by 5:00 p.m
January 15, 2020: Submit signed Thesis Defense Form to the Registrar’s Office by 5:00 p.m.
-Thesis Defense Form is available only at the end of the 1st quiz in the Graduation
Check-Out Course
-Thesis Defense Form should only be signed after the student has defended, passed the
defense and all revisions have been approved.
January 15, 2020: Upload content approved thesis in ProQuest by 11:59 p.m. (thesis students
only)
–Only after you have completed all the steps above, will the format review begin.
January 22, 2020: Thesis Formatting Approval by 1:00 p.m.
22
-Students must complete the CANVAS course titled Thesis Writer’s Workshop
-OR-
-Use the Latex template on the Graduate Studies website (do not create your own
template)
STANDARD CHECK-OUT CHECKLIST AND DEADLINES Student must be registered for fall 2019 credits
January 22, 2020: All students in all degree programs must apply to graduate in Trailhead
-Students may only apply after all the forms above have been processed.
-After students apply to graduate in Trailhead, students will be enrolled in a CANVAS Graduation Check-
Out Course
-Enrollment dates can be found at: Steps to Graduation
Non-Thesis Master’s
April 3, 2020: Complete Graduation Check-Out Course by 5:00 p.m.
Thesis Master’s
April 13, 2020: Complete Graduation Check-Out Course in CANVAS by 5:00 p.m
April 13, 2020: Submit signed Thesis Defense Form to the Registrar’s Office by 5:00pm
-Thesis Defense Form is available only at the end of the 1st quiz in the Graduation
Check-Out Course
-Thesis Defense Form should only be signed after the student has defended, passed the
defense and all revisions have been approved.
April 13, 2020: Upload content approved thesis in ProQuest by 11:59 p.m.
-Only after you have completed all the steps above, will the format review begin.
April 17, 2020: Thesis Formatting Approval by 1:00pm
-Students must complete the CANVAS course titled Thesis Writer’s Workshop
-OR-
-Use the Latex template on Graduate Studies website (do not create your own template)
PhDs
April 6, 2020: Complete Graduation Check-Out Course in CANVAS by 5:00 p.m
April 6, 2020: Submit signed Thesis Defense Form to the Registrar’s Office by 5:00pm
-Thesis Defense Form is available only at the end of the 1st quiz in the Graduation
Check-Out Course
-Thesis Defense Form should only be signed after the student has defended, passed the
defense and all revisions have been approved.
April 6, 2020: Upload content approved thesis in ProQuest by 11:59 p.m.
-Only after you have completed all the steps above, will the format review begin.
April 12, 2019: Thesis Formatting Approval by 1:00pm
-Students must complete the CANVAS course titled Thesis Writer’s Workshop
-OR-
-Use the Latex template on our website (do not create your own template)
23
Students Graduating in May are allowed to walk in the May Commencement Ceremony
Degrees will be awarded May 11-22, 2020
The Geology and Geological Engineering Department checkout form must be submitted
and signed off by Cheryl Medford or Dorie Chen.
Degree Level Change and Program Change
Students wanting to change a degree level must submit the Degree Level Change Request Form. This
form may only be used when changing degrees within the same department AND with exact degree titles.
The table below shows under which conditions a student must submit the Degree Level Change Request
form.
MS Thesis to MS Non-Thesis
MS Non-Thesis to MS Thesis
MS Thesis to Master of Engineering (Non-Thesis)
Master of Engineering (Non-Thesis) to MS Thesis
Currently in PhD and dropping to MS Thesis or MS (Non-Thesis)
Note: All students submitting this form may also need to submit a new Degree Audit Form if one was
already submitted prior to making the change in degree level.
***For example, changing from a PhD "Geology" to MS (thesis) in “Geology” constitutes a change to a
degree level with the “Same Program Name”. Changing from an MS (thesis) in “Geology” to a
Professional Master (Non-Thesis) in "Mineral Exploration" (or vice versa) constitutes a change to a
degree level with a different name, so the student cannot use the Degree Level Change form and will need
to apply online.
Students wanting to add degree programs must submit a new application online for the new degree
program for the following conditions:
If currently in PhD degree program and adding any Master’s degree program
If currently in any Master’s degree program and adding a PhD degree program
If not changing Master’s degree level but changing degree major/title
A student who has started a Master of Science program may request permission to convert to a Doctoral
program without obtaining the Master degree, provided all requirements for the Master degree, except the
completion of the thesis, have been completed. International students are advised to complete a Master
degree prior to applying for the Ph.D. program. The procedure to be followed is outlined below:
After completing the equivalent of at least one summer working on the Master of Science research
project, the student should confer with the thesis committee and obtain permission to initiate an
application for conversion to the Ph.D. program. Approval by the committee at this time is only
approval to initiate the application and does not constitute Departmental approval of the conversion.
If the committee approves initiation, the student should then prepare a report, substantiated with
appropriate illustrations, explaining the results of research accomplishment to that date.
A separate written proposal defining the purpose and scope of the proposed doctoral program should
be prepared and submitted together with the above report. This proposal should include a
justification for the conversion of the initial Master program to a Doctoral program and specify the
scope and nature of the proposed research for the doctoral dissertation (i.e., what has changed in the
original research program to qualify for a dissertation?).
The committee will then arrange a meeting time for presentation and defense of the proposal. The
examining committee will consist of the student’s M.Sc. committee. Upon written committee
24
approval of the proposal, the student will then be allowed to submit an application through the on-line
application system. Letters of recommendation, transcripts, GREs and statements of goals will not be
required of the applicant. The application will be processed according to procedure. Once admitted
into the PhD program, students who will not complete the MS degree will be required to submit a
Withdrawal from a Program form to the OGS.
Completion of M.Sc. Program and Admission to Ph.D. Program
A student who completes a Master degree program is not automatically allowed to continue in a Doctoral
program. A student wishing to continue for a Ph.D. will complete an on-line application through the
school application system. If a student is admitted before all Master degree work is completed, all Master
degree requirements must be satisfied before the start of the Ph.D. program.
Checkout Process
Prior to checkout, every student needs to: Submit an Advisor/Committee form to the OGS. This is only required for thesis based students.
Master’s non-thesis only need to submit a Master’s Non-Thesis Advisor Change / Minor Rep
form if changing advisors or if adding a Minor Representative.
Submit a Degree Audit form to the OGS
PhD Candidates need to: Submit an Admission to Candidacy form to the OGS
Apply to Graduate in Trailhead
Once these steps are completed, then: After applying to graduate in Trailhead, OGS will enroll students in a CANVAS Checkout
Course. Students must: accept course invitation and complete Module #1 prior to defense to
obtain Thesis Defense Form to take to the Defense. The student must complete 100% of the
course by 5 pm on Upload and Check-out Course Completion and Formatting Approval
deadlines.
Verify your Diploma Mailing Address on Trailhead.
Verify your Personal Email address on Trailhead. The graduation photographer will communicate
with you via your personal email address.
Upload your Thesis/Dissertation into ProQuest and obtain format approval from OGS (MS thesis
and PHD students only)
Complete the Survey of Earned Doctorate (PHD students only).
Checkout with the OGS by the Deadline (required - ALL graduating students).
After checkout, make sure to:
Settle accounts with the Cashier's Office
Return your keys to the Key Shop. Holds will be placed on student accounts until keys are
returned.
If you would like to pick up a free package of announcements or if you need to order more
announcements, contact the bookstore.
Pickup commencement tickets for guests. Tickets will be available a few weeks prior to
commencement from the OGS. Entrance to the graduation ceremony will be by ticket only.
Complete the Graduate Student Exit Questionnaire. This will be emailed to each graduating
student at the end of the semester.
APPENDIX
FORMS AND EXAMPLES FOLLOW. FOR
THE MOST RECENT FORMS, PLEASE
ALWAYS GO TO THE INSIDE.MINES.EDU
WEBSITE (FORMS SHOWN ARE EXAMPLES
THAT ARE UPDATED PERIODICALLY).
Mines Administrative Processing Services (MAPS) website
Preferred Travel and Car Rental Agencies
Department
Checkout – Please see Dorie or Cheryl
Graduate Studies forms – Please go to the Graduate Studies website
(https://www.mines.edu/graduate-studies/) for the most current forms as they are revised and
upgraded periodically:
Step-by-Step Guide
Advisor/ Thesis Committee Requirements
MS Non-thesis Graduate Deadlines Chart
MS Thesis Graduate Deadlines Chart
PHD Graduate Deadlines Chart
Thesis Defense Request Form
Transfer Credit Limits
Laboratories and Equipment
Analytical Equipment List
General Laboratory and Workshop Safety
MINES ADMINISTRATIVE PROCESSING SERVICES (MAPS) WEBSITE
Preferred Travel and Car Rental Agencies (updated 1/1/17)
Travel Agency
Frosch Travel 970-223-0442 $23 Fee for phone/email reservations
3538 JFK Pkwy 970-206-9697 (Fax) $9 fee for online reservations
Fort Collins, CO 80525
After Hours Toll Free 866-376-7241
Contact Frosch to request setup for online travel access.
https://client.frosch.com
*$500,000 death and dismemberment insurance is included when booked through a preferred travel agency
**You must provide Frosch with the Index and Account Number that the travel should be charged to, as well as the TA #.
Car Rental Agencies
Agency Contract # Phone Website
Avis A514145 800-525-7521 ext 31695 www.avis.com
Budget T143828 800-525-7521 ext 31695 www.budget.com
Enterprise XZ12450 800-593-0505 www.enterprise.com
National XZ12450 800-593-0505 www.nationalcar.com
Hertz 65579 800-654-3131 www.hertz.com
*To ensure that you have coverage under the school’s liability policy while you are in the courseand scope of your employment, you must use one of these agancies, rent a vehicle covered under the associated contract number, AND pay for the rental using a Colorado School of Mines Travel Card, One Card, or Event Card.
DEPARTMENT
DEPARTMENT OF GEOLOGY AND GEOLOGICAL ENGINEERING Colorado School of Mines
Checkout Information- Undergraduate and Graduate Students
Name: _______________________________________________________________________
Degree: ______________________________________________________________________
Advisor: ____________________________________ Date of Graduation:_________________
Email:__________________________________________ Phone:______________________________ (not your @mines.edu email)
Address after CSM (if unknown at this time, contact the department when known):
___________________________________________________________
___________________________________________________________
Permanent address (relative, etc): Same as above
___________________________________________________________
___________________________________________________________
Field of interest:________________________________________________________________
Company:_______________________Employment date:__________ Starting Salary:_________
Company location: ______________________________________________________________
Graduate study:__________________ Institution:______________ Location:_______________ (if continuing education after CSM) (City and State)
Mailbox/ Rocks/ research materials removed (if applicable): Yes No
Office Number (if applicable):___________
Office Cleaned and all keys returned to key shop (if applicable): Yes No
All other equipment/materials returned (if applicable): Yes No
All One cards returned (if applicable): Yes No
Date cleared through GE office (GE office use only):______________________
GRADUATE STUDIES WEBSITE
Step-by-Step Guide for Current Graduate Students
Order of Action Required When Master's - Non-Thesis Master's - Thesis Doctor of Philosophy
Advisor-Committee Request Form Submitted by 2nd semester of graduate
school Only if changing advisors
Degree Audit and Admission
to Candidacy Form (PhDs only)
No later than semester prior to applying
for graduation (fall graduation deadline is
no later than May 1, spring graduation
deadline is no later than November 1)
Graduation Application Census Day of the intended graduation
semester - see Academic Calendar for
census dates
Registration Requirements-During the Semester of
Defense/Graduation
Students must be registered for at least 1credit hour if: Using any campus resources
(including working with an advisor);Defending a thesis; Graduating.
Thesis & Submittal Page Uploaded in ProQuest
Submit by format approval deadline - See
Graduate School Deadlines
Checkout Form & Statement of
Work Completion
Submit to Grad Office by due date – see
Graduate School Deadlines. Checkout form
emailed to student after Applying to
Graduate in Trailhead
Commencement Practice Required only if attending Commencement
Ceremony
Commencement Ceremony Commencement Dates
December, Second Friday May, Second Thursday
PhD Hooding Ceremony It is mandatory that Doctoral Candidates
attend both the Commencement
Ceremony and PhD Hooding
Committee Role Req/Opt CSM faculty status Department
Advisor Required Graduate faculty Home Department
Minor Representative Optional Graduate faculty Minor Department
Committee Role Req/Opt CSM faculty status DepartmentAdvisor(1st member)
Required Graduate faculty Home Dept
Committee Member (2nd member)
Required Graduate faculty Home Dept
Committee Member (3rd member)
Required Graduate faculty, teaching faculty, research faculty, affiliate/adjunct faculty or off campusHome Department or familiar w/area of study
Co-Advisor(additional member)
OptionalGraduate faculty, teaching faculty, research faculty, affiliate/adjunct faculty or off campusCan't be advisor, minor rep or 1 of the 3 required committee members
Familiar with area of study
Minor Representative (additional member)
OptionalGraduate facultyCan't be advisor, co-advisor or 1 of the 3 required committee members
Minor Department
Committee Role Req/Opt CSM faculty status DepartmentAdvisor(1st member)
Required Graduate facultyHome Department or familiar w/area of study
Committee Member (2nd member)
Required Graduate facultyHome Department or familiar w/area of study
Committee Member (3rd member)
Required Graduate facultyHome Department or familiar w/area of study
Committee Chair(4th member)
Required Graduate facultyOutside: Home Dept, Minor Dept, Major and Minor
Co-Advisor(additional member)
OptionalGraduate faculty, teaching faculty, research faculty, affiliate/adjunct/emeritus faculty or off campus Can't be advisor, minor rep or 1 of the 4 required committee members
Familiar with area of study
Minor Representative (additional member)
OptionalGraduate facultyCan't be advisor, co-advisor or 1 of the 4 required committee members.Minor rep cannot be in the same department as the committee chair
Minor Department
PHD Requirements (minimum of 4 members) All 4 required members must be CSM graduate faculty
Advisor/Thesis Committee RequirementsSubmit a brief resume for any off campus member
Master's (non-thesis) Requirements
MS (thesis) Requirements (minimum of 3 members) Two members must be CSM graduate faculty from the home department
Master's committee chair does not need to be specified on the form, but the committee chair must be graduate faculty & cannot be the advisor, co-advisor or minor rep (if applicable).
2018-2019 2019-2020 2020-2021December Early Check-Out
Walk in December Ceremony Degree Awarded December 2018 December 2019 December 2020
Degree Audit form (5:00pm) May 1, 2018 May 1, 2019 May 1, 2020
Apply to Graduate in Trailhead (11:59pm) August 24, 2018 August 23, 2019 August 20, 2020
Checkout Course Completion (5:00pm) September 4, 2018 September 4, 2019 September 2, 2020
December Standard Check-Out Walk in December Ceremony
Degree Awarded December 2018 December 2019 December 2020
Degree Audit form (5:00pm) May 1, 2018 May 1, 2019 May 1, 2020
Apply to Graduate in Trailhead (11:59pm) September 4, 2018 September 4, 2019 September 2, 2020
Checkout Course Completion (5:00pm) November 9, 2018 November 8, 2019 November 6, 2020
May Early Check-Out Walk in May Ceremony
Degree Awarded May 2019 May 2020 May 2021
Degree Audit form (5:00pm) November 1, 2018 November 1, 2019 November 2, 2020
Apply to Graduate in Trailhead (11:59pm) January 11, 2019 January 10, 2020 January 9, 2021
Checkout Course Completion (5:00pm) January 23, 2019 January 22, 2020 January 20, 2021
May Standard Check-Out Walk in May Ceremony
Degree Awarded May 2019 May 2020 May 2021
Degree Audit form (5:00pm) November 1, 2018 November 1, 2019 November 2, 2020
Apply to Graduate in Trailhead (11:59pm) January 23, 2019 January 22, 2020 January 20, 2021
Checkout Course Completion (5:00pm) April 5, 2019 April 3, 2020 April 2, 2021
August Early Check-Out Walk in December Ceremony
Degree Awarded August 2019 August 2020 August 2021
Degree Audit form (5:00pm) March 1, 2019 March 2, 2020 March 1, 2021
Apply to Graduate in Trailhead (11:59pm) April 15, 2019 April 15, 2020 April 15, 2021
Checkout Course Completion (5:00pm) May 17, 2019 May 15, 2020 May 14, 2021
August Standard Check-Out Walk in December Ceremony
Degree Awarded August 2019 August 2020 August 2021
Degree Audit form (5:00pm) March 1, 2019 March 2, 2020 March 1, 2021
Apply to Graduate in Trailhead (11:59pm) April 15, 2019 April 15, 2020 April 15, 2021
Checkout Course Completion (5:00pm) August 1, 2019 July 31, 2020 August 2, 2021
MASTER'S NON-THESIS GRADUATION DEADLINES
Must register during semester of checkout.
Spring registration required Summer registration not required
Summer registration required Fall registration not required
Academic Year
AUGUST
Spring registration required
DECEMBER
MAY
Summer registration required Fall registration not required
Fall registration required
Fall registration required Spring registration not required
2018-2019 2019-2020 2020-2021December Early Check-Out
Walk in December Ceremony Degree Awarded December 2018 December 2019 December 2020
Degree Audit form (5:00pm) May 1, 2018 May 1, 2019 May 1, 2020
Apply to Graduate in Trailhead (11:59pm) August 24, 2018 August 23, 2019 August 20, 2020
Check-out Course Completion (5:00pm) August 28, 2018 August 27, 2019 August 24, 2020
Thesis Defense Form (5:00pm) & Upload (11:59 pm) August 28, 2018 August 27, 2019 August 24, 2020
Thesis Formatting Approval (1:00pm) September 4, 2018 September 4, 2019 September 2, 2020
December Standard Check-Out Walk in December Ceremony
Degree Awarded December 2018 December 2019 December 2020
Degree Audit form (5:00pm) May 1, 2018 May 1, 2019 May 1, 2020
Apply to Graduate in Trailhead (11:59pm) September 4, 2018 September 4, 2019 September 2, 2020
Check-out Course Completion (5:00pm) November 19, 2018 November 18, 2019 November 23, 2020
Thesis Defense Form (5:00pm) & Upload (11:59 pm) November 19, 2018 November 18, 2019 November 23, 2020
Thesis Formatting Approval (1:00pm) November 30, 2018 November 22, 2019 November 27, 2020
May Early Check-Out Walk in May Ceremony
Degree Awarded May 2019 May 2020 May 2021Degree Audit form (5:00pm) November 1, 2018 November 1, 2019 November 2, 2020
Apply to Graduate in Trailhead (11:59pm) January 11, 2019 January 10, 2020 January 9, 2021
Check-out Course Completion (5:00pm) January 16, 2019 January 15, 2020 January 13, 2021
Thesis Defense Form (5:00pm) & Upload (11:59 pm) January 16, 2019 January 15, 2020 January 13, 2021
Thesis Formatting Approval (1:00pm) January 23, 2019 January 22, 2020 January 20, 2021
May Standard Check-Out Walk in May Ceremony
Degree Awarded May 2019 May 2020 May 2021Degree Audit form (5:00pm) November 1, 2018 November 1, 2019 November 2, 2020
Apply to Graduate in Trailhead (11:59pm) January 23, 2019 January 22, 2020 January 20, 2021
Check-out Course Completion (5:00pm) April 15, 2019 April 13, 2020 April 12, 2021
Thesis Defense Form (5:00pm) & Upload (11:59 pm) April 15, 2019 April 13, 2020 April 12, 2021
Thesis Formatting Approval (1:00pm) April 19, 2019 April 17, 2020 April 16, 2021
August Early Check-Out Walk in December Ceremony
Degree Awarded August 2019 August 2020 August 2021Degree Audit form (5:00pm) March 1, 2019 March 2, 2020 March 1, 2021
Apply to Graduate in Trailhead (11:59pm) April 15, 2019 April 15, 2020 April 15, 2021
Check-out Course Completion (5:00pm) May 13, 2019 May 11, 2020 May 10, 2021
Thesis Defense Form (5:00pm) & Upload (11:59 pm) May 13, 2019 May 11, 2020 May 10, 2021
Thesis Formatting Approval (1:00pm) May 17, 2019 May 15, 2020 May 14, 2021
August Standard Check-Out Walk in December Ceremony
Degree Awarded August 2019 August 2020 August 2021Degree Audit form (5:00pm) March 1, 2019 March 2, 2020 March 1, 2021
Apply to Graduate in Trailhead (11:59pm) April 15, 2019 April 15, 2020 April 15, 2021
Check-out Course Completion (5:00pm) July 25, 2019 July 24, 2020 July 26, 2021
Thesis Defense Form (5:00pm) & Upload (11:59 pm) July 25, 2019 July 24, 2020 July 26, 2021
Thesis Formatting Approval (1:00pm) August 1, 2019 July 31, 2020 August 2, 2021
AUGUST
MAY
DECEMBER
Academic Year
MASTER'S THESIS GRADUATION DEADLINES Must register during semester of defense, upload and checkout.
Spring registration requiredSummer registration not required
Summer registration requiredFall registration not required
Summer registration requiredFall registration not required
Fall registration required
Fall registration requiredSpring registration not required
Spring registration required
2018-2019 2019-2020 2020-2021December Early Check-Out
Walk in December Ceremony Degree Awarded December 2018 December 2019 December 2020
Degree Audit form (5:00pm) May 1, 2018 May 1, 2019 May 1, 2020Admission to Candidacy form (5:00pm) August 20, 2018 August 19, 2019 August 17, 2020
Apply to Graduate in Trailhead (11:59pm) August 24, 2018 August 23, 2019 August 20, 2020Check-out Course Completion (5:00pm) August 28, 2018 August 27, 2019 August 24, 2020
Thesis Defense Form (5:00pm) & Upload (11:59 pm) August 28, 2018 August 27, 2019 August 24, 2020Thesis Formatting Approval (1:00pm) September 4, 2018 September 4, 2019 September 2, 2020
December Standard Check-Out Walk in December Ceremony
Degree Awarded December 2018 December 2019 December 2020Degree Audit form (5:00pm) May 1, 2018 May 1, 2019 May 1, 2020
Admission to Candidacy form (5:00pm) August 20, 2018 August 19, 2019 August 17, 2020Apply to Graduate in Trailhead (11:59pm) September 4, 2018 September 4, 2019 September 2, 2020
Check-out Course Completion (5:00pm) November 19, 2018 November 11, 2019 November 9, 2020 Thesis Defense Form (5:00pm) & Upload (11:59 pm) November 19, 2018 November 11, 2019 November 9, 2020
Thesis Formatting Approval (1:00pm) November 30, 2018 November 15, 2019 November 13, 2020
May Early Check-Out Walk in May Ceremony
Degree Awarded May 2019 May 2020 May 2021Degree Audit form (5:00pm) November 1, 2018 November 1, 2019 November 2, 2020
Admission to Candidacy form (5:00pm) January 8, 2019 January 7, 2020 January 5, 2021Apply to Graduate in Trailhead (11:59pm) January 11, 2019 January 10, 2020 January 9, 2021
Check-out Course Completion (5:00pm) January 16, 2019 January 15, 2020 January 13, 2021 Thesis Defense Form (5:00pm) & Upload (11:59 pm) January 16, 2019 January 15, 2020 January 13, 2021
Thesis Formatting Approval (1:00pm) January 23, 2019 January 22, 2020 January 20, 2021
May Standard Check-Out Walk in May Ceremony
Degree Awarded May 2019 May 2020 May 2021Degree Audit form (5:00pm) November 1, 2018 November 1, 2019 November 2, 2020
Admission to Candidacy form (5:00pm) January 8, 2019 January 7, 2020 January 5, 2021Apply to Graduate in Trailhead (11:59pm) January 23, 2019 January 22, 2020 January 20, 2021
Check-out Course Completion (5:00pm) April 8, 2019 April 6, 2020 April 5, 2021 Thesis Defense Form (5:00pm) & Upload (11:59 pm) April 8, 2019 April 6, 2020 April 5, 2021
Thesis Formatting Approval (1:00pm) April 12, 2019 April 10, 2020 April 9, 2021
August Early Check-Out Walk in December Ceremony
Degree Awarded August 2019 August 2020 August 2021Degree Audit form (5:00pm) March 1, 2019 March 1, 2020 March 2, 2021
Admission to Candidacy form (5:00pm) March 1, 2019 March 1, 2020 March 2, 2021Apply to Graduate in Trailhead (11:59pm) April 15, 2019 April 15, 2020 April 15, 2021
Check-out Course Completion (5:00pm) May 13, 2019 May 11, 2020 May 10, 2021 Thesis Defense Form (5:00pm) & Upload (11:59 pm) May 13, 2019 May 11, 2020 May 10, 2021
Thesis Formatting Approval (1:00pm) May 17, 2019 May 15, 2020 May 14, 2021
August Standard Check-Out Walk in December Ceremony
Degree Awarded August 2019 August 2020 August 2021Degree Audit form (5:00pm) March 1, 2019 March 1, 2020 March 2, 2021
Admission to Candidacy form (5:00pm) March 1, 2019 March 1, 2020 March 2, 2021Apply to Graduate in Trailhead (11:59pm) April 15, 2019 April 15, 2020 April 15, 2021
Check-out Course Completion (5:00pm) July 25, 2019 July 24, 2020 July 26, 2021 Thesis Defense Form (5:00pm) & Upload (11:59 pm) July 25, 2019 July 24, 2020 July 26, 2021
Thesis Formatting Approval (1:00pm) August 1, 2019 July 31, 2020 August 2, 2021
AUGUST
MAY
DECEMBER
Academic Year
PHD GRADUATION DEADLINESMust register during semester of defense, upload and checkout.
Spring registration requiredSummer registration not required
Summer registration requiredFall registration not required
Summer registration requiredFall registration not required
Fall registration required
Fall registration requiredSpring registration not required
Spring registration required
COLORADO SCHOOL OF MINESOFFICE OF GRADUATE STUDIES
Thesis Defense Request Form
• Student is responsible for submitting this form to the department/division a minimum of oneweek prior to the defense date.
• Student must submit final version of thesis to Committee members as specified by the programor if not specified no less than one week prior to the defense date.
• Admission to Candidacy must be approved prior to the thesis defense.• Student must be registered at the time of defense.
Student Name: Date:
CWID:
I wish to schedule my thesis defense as follows:
Date: Time: Bldg/Rm:
Degree Title:
ME MS PhD
Thesis Title:
All committee members have been contacted and their initials below signify their willingness to participate in this thesis defense. In addition, the department, division or program head has been informed and acknowledges that in scheduling this defense the candidate has met any departmental, divisional or programmatic requirements related to the scheduling of a thesis/dissertation defense. Please print name, initial and include your department.
____________________________________ ____________Advisor Date____________________________________ ____________Advisor Date____________________________________ ____________Chairman Date____________________________________ ____________Committee Member Date____________________________________ ____________Committee Member Date____________________________________ ____________Committee Member Date____________________________________ ____________Committee Member Date____________________________________ ____________Department/Division/Program Head Date
DegreeCredits Required for
Degree Program
Maximum Allowable Double
Count Credits
Maximum Allowable Transfer
Credits
Combined Student BS/Master's (All majors other than
Computer Science, Electrical Engineering and
Engineering and Technology Management)30 0 9
Combined Student BS/Master's (Electrical Engineering
(500-level or above) or Engineering Technology
Management or Computer Science (***400-level or
above)
30 6 9
Combined Student
BS/Master's (Non-Thesis)36 or 38 6 15
Combined Student BS/Master's (Thesis) 36 or 38 6 9Combined Student BS/PhD 72 - 90 6 24*Master's Degree (Thesis & Non-Thesis) 30 0 9Master's Degree (Non-Thesis) 36 - 38 0 15Master's Degree (Thesis) 36 - 38 0 9PhD Degree
-transferring a Thesis based Master's degree from any
university other than CSM72 - 90 0 36*
PhD Degree
- transferring a Non-Thesis based Master's degree
from any university other than CSM -or- transferring
graduate level courses from any university other than
CSM
72 - 90 0 24*
MINORS Credits Required for MinorMaximum Allowable Double Count
Credits
Maximum Allowable Transfer Credits for
Minor
Minor with a Master's Degree 9 see above 4
Minor with PhD Degree 12 see above 5
***No more than 9 credit hours of 400-level may be applied toward a degree, includes major and minor.
DOUBLE COUNT and TRANSFER CREDITSSubject to Advisor/Committee Approval
* PhD's - transfer credits are not cumulative, maximum allowed is either 24 if non-thesis or 36 if thesis (cannot transfer 2 master's degrees).
Transfer limits above apply to the maximum allowable number of transfer credits to be used towards a degree & a minor combined.
Students who wish to transfer credit towards a minor are limited to:
Transfer credits limits are in semester hours. Students tranferring any credit other than semester hours (ie. quarter hours, ECT (European Hours), etc) will have the hours
adjusted accordingly. For example, 3 quarter hours =2 semester hours and 4 ECT hours = 2 semester hours.
Effective Fall 2018 - Courses to be Double Counted must have a grade of B- or better
LABORATORIES AND EQUIPMENT
Department of Geology and Geological Engineering Analytical Equipment List
Questions concerning department equipment can be directed to the person listed below who supervises the laboratory.
Automated Mineralogy Facility Carl Zeiss EVO50/ QEMSCAN Room: 118/119 TESCAN – VEGA-3/ TIMA3 Contact: Katharina Pfaff For rapid mineralogical mapping of polished rock slabs, thin sections, grain separates and rock powders providing modal mineralogy, grain size and shape distribution, porosity and fracture estimates. See http://geology.mines.edu/econogeol/electronmicroscopy.html for more details.
Carbon Coater Gessington Carbon Coates Room: 118 Contact: Katharina Pfaff For variable thickness coating of SEM and microprobe samples with carbon.
Conductivity Meters Hach CO150 Room: 101D Contact: Dave Benson For the measurement of the conductivity of water to aid in the overall measurement of water quality.
Cone Mill BICO #242-53 Room: 147D Contact: Yvette Kuiper For grinding and pulverizing of broken rock samples in preparation for geochronological analysis.
FE-SEM Laboratory TESCAN MIRA3 LMH FE-SEM Room: 116 Contact: Katharina Pfaff, Thomas Monecke The instrument provides topographical and elemental information at magnifications of 10x to over 300,000x at a spatial resolution down to the nanometer scale. The FE-SEM is equipped with a Bruker XFlash®6130 silicon drift detector for energy-dispersive x-ray spectrometry (EDS).
Field pH Meters Room: 301 Contact: Rick Sarg For the measurement of pH of water in the field.
Fluid Inclusion and Cathodoluminescence Laboratory Olympus Bx51 Room: 111 Contact: Thomas Monecke The laboratory is equipped with an Olympus BX51 microscope for fluid inclusion petrography. Microthermometric data on fluid inclusions are collected using a Fluid Inc.-adapted U.S. Geological Survey gas-flow hating and freezing stage that is calibrated using synthetic fluid inclusions. Freezing
temperatures measured on the system are accurate to 0.1C. The accuracy of heating measurements
ranges from approximately 2C at 200C to approximately 10C at temperatures above 600C. Imaging
of fluid inclusion is conducted using an Optronics Microfire A/R camera. This camera also allows inspection of fluid inclusions using IR in selected opaque minerals (e.g. stibnite, enargite). The laboratory also houses a HC5-LM hot-cathode CL microscope by Lumic Special Microscopes, Germany which allows inspection of the thick sections under electron bombardment. The microscope was operated at 14 kV
and with a current density of ca. 10 A mm-2. CL images were captured using a high sensitivity, double-stage Peltier cooled Kappa DX40”C CCD camera.
Gas Mixing Furnace DelTech Room: 407 Contact: Ric Wendlandt
A high temperature (up to 1500C) atmosphere gas-mixing furnace, for oxygen fugacity sensitive melting of rocks. Oxygen fugacity is monitored with Yitrium stabilized ZrO2 ceramic sensor, and controlled by Co-CO2 gas mixture.
General Chemistry Lab – Fluid-rock Interaction Lab Ion Chromotagraphy Room: 406 Contact: Alexis Sitchler, Alexander Gysi A general chemistry and research labs with a wide variety of standard equipment including: fume hoods, glassware, ovens, hotplates, centrifuges, scales, etc.
Gold Coater Technics-Hummer V Room: 116 Contact: Katharina Pfaff For variable thickness coating of SEM samples with gold.
Isotopic Liquid Water Analyzer Room: 404 Contact: Susann Stolze Novel simultaneous spectroscopic measurement of hydrogen and oxygen of liquid water samples.
Magnetic Separator Franz L-1 Room: 147E Contact: Yvette Kuiper For the separation of magnetically sensitive grains of a ground up rock sample by use of a vibrating slide within a magnetic field, in preparation for various types of analysis.
Mass Spectrometer Micromass Isoprime Room: 404 Contact: Susann Stolze A gas source stable isotope ratio mass spectrometer for isotopic analysis of H, C, N, O, and S. It has a MultipPrep carbonate and water automated preparation system, Eurro-vector elemental analyzer for continuous flow isotopic analysis of C, N, and S. Separate vacuum prep lines are available for offline sample prep.
Petrographic Microscope Lietz Laborlux 12 Pol Room: 401 Contact: Ric Wendlandt
A research quality petrographic microscope with a digital imaging system and a camera attachment. Various other research microscopes are distributed throughout the Department.
Rock Crushers and Mills Room: 147D Contact: Thomas Monecke Jaw crusher and ring mill for crushing and pulverizing rock samples for geochemical analysis.
Solid Medium Piston-Cylinder Apparatus (2) Room: 407 Contact: Ric Wendlandt
For very high pressure (up to 30 kbar)-high temperature (up to 1700C) solid-melting of rock materials.
Source Rock Analyzer Room: 301B Contact: Steve Sonnenberg Hydrous pyrolysis analysis of source and reservoir rock hydrocarbons for organic carbon content and estimation of thermal maturity.
Stream Flow Meter Price AA current Meter #1220 Room: 101D Contact: Dave Benson For field measurement of water flow volumes of streams.
Thin Section Lab Room: 147 Contact: Jae Erickson Rock saws, laps, automated thin section and polishing equipment for production of petrographic thin sections, polished thin sections, and fluid inclusion sections.
Water Level Sounder Solinist #11688 Room: 101D Contact: Dave Benson For measurement of water levels in wells along with measurements of organic liquid-water interface levels.
X-Ray Diffractometer Scintag XDS 2000 Room: 405 Contact: Ric Wendlandt A powder x-ray diffraction system used for mineral characterization. The solid state system is PC driven and completely automated, capable of multi-sample analysis and uses a copper radiation source.
Guidance Document
General Laboratory and Workshop Safety
The following guidelines apply to all laboratories and workshops where use or storage of hazardous materials occurs or where a physical hazard exists.
Appropriate Lab Attire The minimum appropriate lab and workshop attire includes the items listed below. Additional personal protective equipment (PPE) may be necessary depending on the hazards of the activity. Contact Environmental Health and Safety (EHS) for assistance in evaluating PPE needs.
Safety glasses with side shields or safety goggles.
Sturdy shoes that cover the whole foot and protect feet from spills, broken glass, or fallingobjects. No open-toed shoes, sandals, crocstm, flip-flops, etc.
Clothing that covers exposed skin when working with hazardous materials. Clothing shouldcover all portions of the torso, including the midriff and shoulders avoid tank-tops and half-shirts. Short pants (shorts) and short skirts are not permitted. Long skirts, below the knee, areacceptable; but discouraged in chemistry labs.
Wear a lab coat (and possibly an apron) when working with hazardous materials that maycontaminate clothing or cause physical injury by skin contact.
Wear appropriate gloves when handling chemicals, hot or cold objects, welding, working withheavy equipment or when objects present a physical injury risk. Remove gloves and wash handsbefore leaving the laboratory.
Leave lab coats in the laboratory – do not take or wear contaminated lab coats into non-laboratory areas (bathrooms, conference rooms, offices.) and do not take contaminated labcoats home.
Tie back and secure long hair. Remove loose or dangling objects such as bracelets andnecklaces. Avoid wearing hand jewelry. Do not wear loose clothing while working aroundmoving machinery.
Working Alone Working alone means work performed when nobody is within sight or earshot that could assist in the event of an emergency. This applies to circumstances where, in the event of injury or emergency, immediate assistance is not readily available and the student/worker may not be able to self-rescue or activate emergency services. This situation can exist during and outside regular working hours (Monday – Friday 8 AM to 5 PM).
Principle investigators and supervisors should discuss with their students/workers upcoming work and evaluate whether or not it is acceptable to perform the work alone or if a buddy-system should be used. EHS is available to assist with hazard evaluation and control.
Examples of work that should not be performed alone include changing out toxic gas cylinders, working with pyrophoric materials outside of a glovebox, working with shock sensitive materials, working on energized electrical systems with exposures greater than 50 volts, entering a confined space, working around mechanical equipment with exposed rotating parts (e.g. lathe, roller mill or power saw), working with concentrated (≥ 48%) hydrofluoric acid or working with highly exothermic reaction systems (e.g. polymerizations, oxidations, or hydrogenations).
Food and Beverages Do not consume or store food or beverages in labs or workshops.
Access Control Follow the Mines Building Access Policy for authorized entry to laboratories only. Authorized entry means with the permission of the Principal Investigator, Lab or Workshop Director, and other Mines required policies relating to restricted access. Laboratory and workshop doors must be locked when not occupied. Doors must not be propped open - propping doors may allow unauthorized access to hazardous areas and may compromise fire protection and air handling (HVAC) function.
General Chemical Safety Guidelines Minimize chemical exposure-
o Avoid skin contact as much as possible. o Wear eye protection where chemicals are used. o Verify there is adequate ventilation. o Wear appropriate gloves for the hazards. o Wear lab coats and other protective clothing. o Do not eat or drink in the lab. Do not apply cosmetics, lip balm. o Wash hands after removing gloves and before leaving the lab. o Don’t pipet or start a siphon by mouth. o Keep personal belongings away from chemicals.
Be knowledgeable. Do not underestimate risk- o Obtains and read safety data sheets prior to initial handling of a chemical. o Assume that any unfamiliar chemical is hazardous. o Consider mixtures to be as hazardous as any component. o Know the emergency procedures for the lab, department and building. o Know location of emergency shower, eyewash station and first aid kit.
Use proper engineering controls and safe procedures- o Substitute less hazardous chemicals when practical. o Verify there is adequate ventilation. Use laboratory hood and/or glove box when openly
handling hazardous chemicals. o Label all chemical containers. o Keep work areas clean and uncluttered.
Document Control Log
Revision # Revision Description Date
1 Initial issue 8/7/2012
2 Added appropriate lab attire, food and beverage, access control and working after hours information
6/12/2015