Hand Tools

Unitis ContraCtor sUpplies 63

Han

d To

ols

858-332-2133

Item # 22806856

California framer• Best grade curved hickory handle for comfort and leverage • Triple wedge head to handle assembly • Polished forged head • Extra large milled face

Item # 10006857

mig Weld framing Hammer• 15 oz weight for faster swing and minimized fatigue• All steel design for durability and long life• Magnetic nail started for easy one handed nail placement• Vibration absorbing grip minimizes damaging vibrations and fatigue

Item # 10006858

HigH VeloCity framing Hammer• 17 oz weight for fast swing and reduced fatigue• Checker face design for nail traction• Genuine hickory handle for durability and long life• Axe or straight handle for comfort and accuracy• Grip enhancing finish reduces slipping

Item # 12203825

22 oz roCk PiCk• Steel handle• Used to split rock• Always wear eye protection• Forged one-piece head and handle• Blue nylon-vinyl shock-reduction grip• Ergonomically correct• Full-polished tool steel• Weighs 22 ounces• 22 Oz

Item # 12205811

20 oz CurVe ClaW Hammer• All steel construction• Forged in one piece and fully polished• Exclusive nylon-vinyl deep cushion grip• Smooth face• 20 oz

Item # 12207595

20 oz riP ClaW Hammer• Steel handle• Used to split rock• Always wear eye protection• Forged one-piece head and handle• Blue nylon-vinyl shock-reduction grip• Ergonomically correct• Full-polished tool steel• Weighs 22 ounces• 22 Oz

Hammers

Unitis ContraCtor sUpplies

Hand Tools

64 858-332-2133

fatmax antiVibe CarPenter’s HatCHet• Patented tuning fork design reduces harmful vibration that can cause wrist and arm injuries• Forged, one-piece steel construction for increased strength and durability• Rim temper reduces incidences of chipping or spalling• Ergonomically designed handle with rubber grip for increased comfort and performance

Item # 11600250

fatmax antiVibe sHingler’s Hammer• Patented tuning fork design reduces harmful vibration that can cause wrist and arm injuries.• Forged, one-piece steel construction for increased strength and durability• Rim temper reduces incidences of chipping or spalling• Ergonomically designed handle with rubber grip for increased comfort and performance

Item # 11600251

15” suPerbar• Essential tool for homeowners or tradesmen• 15-Inch length provides excellent leverage• “Shepherd’s crook” rocker head is designed for maximum prying power• Forged, spring tempered steel for heavy duty use•Three beveled nail slots; polished sharp blades for easy insertion

Item # 22801568

Pea sHooter• 24” Nail Driver• Spring-Loaded Drive Shaft• Won’t Pinch Your Hand Between The Handle And The Tube• 2-1/2 Lb. Handle On The Drive Shaft• Made in the USA

Item # 90304582

Hammer taCker• Durable Chrome Finish• All-steel construction• Long lasting hardened steel working parts• Specially designed power grip handle• Jam-proof mechanism

Item # 10601699

Item # 10600160

staPlesFor use in arrow staple guns• Kit includes staple gun and an expando attachment

• Sets and drives nails or brads quickly, safely, and precisely• Professional looking jobs every time• No marred surfaces• No bent nails

10600626 1/4” 1250 / pk10600156 1/4” 5000 / pk10601698 5/16” 1250 / pk10600157 5/16” 5000 / pk10600625 3/8” 1250 / pk10600158 3/8” 5000 / pk10600159 1/2” 1250 / pk10601738 1/2” 5000 / pk

Item No. DeSCRIPtIoN

Striking Tools & Staplers

HeaVy duty t50 staPle gun


Han

d To

ols

858-332-2133

multi Plier tool• Flick of the wrist, one-handed opening pliers• Compact, lightweight, durable• Components: Needle nose pliers, wire cutter, wire crimper, serrated knife blade, Fiskars scissors, cross point screwdriver, small, medium and large flat blade screwdrivers, can opener, bottle opener.

Item # 41504063

roofing knife, 7”

Item # 33201949

• Roofing knife• Heavy-gauge steel casing• 7” long• Blade adjusts to exact depth• Accepts most roofing, hook, or utility blades

fastbaCk utility knife

Item # 10806301

• One Handed Blade Opening - Flip Blade Open up to 3X Faster• Tool Free Blade Change - Change Blades up to 5X Faster• Wire Stripper - Strip up to 10 Gauge Wire• Integrated Gut Hook - Cut Without Opening Knife• Thin Body Design - Easy Pocket Storage

side slide utility knife

Item # 10806302

• Tool Free Blade Change - Change Blades up to 5X Faster• Side Slide Blade Activation - Less Accidental Activations• Wire Stripper - Strip up to 10 Gauge Wire• Blade Storage - Store up to 5 Blades• Rubber Over Mold Grip - Increased Comfort

Item # 10504581

• Quick change mechanism allows for easy blade removal without opening the knife• Smooth, three-position slide provides increased durability for frequent use• Easy tool-free entry with push button operation opens the knife and exposes replacement blades• Features inside storage for up to 5 blades• Includes 6 Irwin Blue Blade Bi-Metal Utility Blades

retraCtable utility knife

Item # 10504593

• Quick change button• Extended Thumb Ledge• Anchored Belt Clip• Wire Stripper Notch• Anchored belt clip increases durability and stays

folding utility knife

Item # 11600234

• Starts sharper and stays sharper than standard heavy-duty blades• 3-position, retractable blade; blade storage in handle• Patented interlocking nose holds blade securely• Includes 3 blades• Stanley’s limited lifetime warranty

folding utility knife

• Pointed razor-type reversible blades for utility knives• Includes sturdy plastic dispenser for safety and convenience• Has hang holes for wall mounting

blades

11600236 5 / pk11600237 100-Blade Dispenser Pack


• Unique curved shape rests naturally in the hand• Carbon Steel blade for increased product life• Dimensions: 5 3/4” x 1 1/2”

box knife

20600578 Black20601184 Orange


Item # 10502893

• Two-positions: Full Extension For Utility Cutting; Short Position For Box Cutting• Ergonomic Handle• Self-retracts When Not Actuating The Slider Button• No-lose Screw For Easy Opening• 19 Degree Cutting Angle

safe utility knife & blade

Item # 10202823

Cuts duct board and flexible duct. Double-edged knife-regular and serrated. Puncture resistant nylon sheath with belt loop. Cushion-grip handle for comfort.

serrated duCt knife

Knives


Hand Tools

66 858-332-2133

Item # 19201327

• Heavy gauge blade with eight teeth per inch• Sharp point to penetrate wallboard easily without drilling• Cuts wallboard, masonite, plywood, and wood• Hardwood handle with steel ferrule• Semi-contoured handle

dryWall utility saW, 6”

Item # 10806300

• Tool Free Blade Change - Change Blades up to 10X Faster• Folding Blade - Easier and safer storage• Rubber Over Mold Grip - Increased Comfort• Accepts All Sawzall Blades - Increased Versatility• Includes: (1) Folding Jab Saw, (3) Recip Blades

folding Jab saW

Item # 10205127

• Cuts drywall, wallboard, plywood, and plastic• Blade has triple-ground teeth for a fast cut• Cuts in both directions (push and pull)• Hardened, beveled carbon steel point for scoring and plunge cuts

Jab saW

Item # 11600239

• 6-inch jab saw with a sharpened tip for puncturing drywall• SharpTooth technology cuts 50% faster than conventional saws• Induction-hardened teeth stay sharp up to 5 times longer than standard teeth• Thick ergonomically designed grip resists slipping and adds comfort

6” fatmax Jab saW

Item # 26801510

• Multiple Pin Locations for mounting blade at 90° or 45° for standard or flush-cut applications• Tensioning Handle provides extra torque for straighter cuts and longer blade life• Alloy Steel Support Beam makes frame stronger and allows over 30,000 PSI tensioning• Ergonomic grip protects fingers and grips comfortably

master mCCoy HaCksaW frame

Item # 26801511

HigH tension HaCksaW frame• Locking Screw Design allows for storage of extra blades and secures blade for “jab” sawing• Multiple Pin Locations for mounting blade at 90° or 45° for standard or flush-cut applications• Tensioning Handle provides extra torque for straighter cuts and longer blade life

Item # 10200048

dual-PurPose HaCksaW• Blade has three teeth sizes.• Blade converts quickly to 90° or 45° for standard or flush-cut applications• Pivot-lock adjusts blade tension for straighter cuts and longer blade life• Set screw allows for storage of extra blades and secures blade for “jab” sawing.

triPle tootH HaCksaW blade

Item # 11600238

fat max Hand saW, 15”• 15-inch hand saw with a 9 TPI blade• SharpTooth technology cuts 50% faster than conventional saws• Induction-hardened teeth stay sharp up to 5 times longer than standard teeth• Thick, ergonomically designed grip resists slipping and adds comfort• 15-inch blade, 9 TPI; limited lifetime warranty

Item # 10806308

aViation sniPs

aViation sniPs• Cutting Capacity Cold-Roll Steel 18 ga Stainless Steel 23 ga• Hot-drop forged steel blades• Ergonomically designed ProTouch Grips

• High speed steel cutting edge with 8% cobalt for longer blade life• Flexible to prevent shattering during use

26801505 18 TPI, 12”26801506 24 TPI, 12”26801507 20/24 TPI, 12”26801508 26/32 TPI, 12”26801509 18/24/32 TPI, 12”


• Forged Alloy Steel Blades - For Maximum Tool Strength• Rust Protection - Hard Chrome plated blades increases tool life by reducing corrosion• Serrated Jaws - Cuts: Up to 18ga CRS (Cold Rolled Steel); 22ga SS (Stainless Steel)

10502248 10”, Straight10502176 10”, Straight, Left 10502247 10”, Straight, Right


Saws & Shears


Han

d To

ols

858-332-2133

1/4” x 6” sCreWdriVer• Narrow cabinet tip permits blade access where space is limited • 1/4” shank tip width • 6” shank length • 10-11/32” overall length • .30 lbs

Item # 10200045

10 in 1 sCreWdriVer / nutdriVer• Screwdriver and nut driver all in one• End of handle is marked to quickly identify tool• Features 5/16 in. and 1/4 in. nut drivers, no.1 and no.2 Phillips, 1/4 in. and 3/16 in. slotted, no.10 and no.15 TORX, no.1 and no.2 square-recess attachments

Item # 10200042

10202397 1/4” x 410200043 5/16” x 6”10200044 3/8” x 8”


demo sCreWdriVers• Heavy-duty square shank for wrench-assisted turning • Bolster reinforces shank for hard use • Designed for the most demanding uses

7 PieCe sCreWdriVer set• General-purpose selection of the most frequently used screwdrivers.• Includes: three cabinet-tip, two Phillips-tip and two

Item # 10200051

7 PieCe nut driVer set• Color-coded handle end for quick and easy identification• Standard length for most applications• Fits over long bolts and studs

Item # 10200047

10202523 5/16” x 3”10200046 3/8” x 3”10205818 7/16” x 3”


nut driVer• Color-coded handle end for quick and easy identification• Standard length for most applications• Fits over long bolts and studs

CusHion griP sCreWdriVer, 3/32” x 3”• Premium chrome plating for long tool life• Precision-formed 3/32 in. flat head tip provides an exact fit for small screw applications• Cushion-Grip handle allows for greater torque and comfort

Item # 10202447

HeaVy-duty multi-bit sCreW-driVer/nut driVer• Interchangeable shaft holds 6 universal tips; converts to 3 nut driver sizes and 1 hex driver• Improved design and construction provide greater strength for tough applications• Nut drivers are heat-treated for added strength and improved torque• Cushion-Grip handles provide superior torque and comfort

Item # 10204454

sCreWdriVer set, 4 PC.• Mini Cushion-Grip handles for superior comfort and grip• Patented Tip-Ident™ quickly identifies the type of screw driver and tip orientation• Precision tip for exact fit• Premium chrome-plated shafts for corrosion resistance

Item # 10202569

Conduit-fitting and reaming sCreWdriVer

Item # 10202564

CusHion griP sCreW-driVer, #2 x 4”• Tip is precision machined to provide a more consistent geometric symmetry than conventional Philips tip screwdrivers • Provides accurate fit and torque without slippage • No. 2 Philips tip

Item # 10202433

CusHion griP sCreW-driVer, #2 x 7”• Patented tip-ident quickly identifies the type of screw driver and screwdriver tip orientation• Cushion-grip handle allows for greater torque and comfort

Item # 10202434

Screwdrivers & Nutdrivers

• Reams both the inside and outside of the conduit at the same time• Replaceable reaming blade is now held in place with a 1/16” hex socket set screw


Hand Tools

68 858-332-2133

CusHion griP sCreW-driVer, #2 x 4”• Cushion-Grip handle allows for greater torque and comfort.• Patented Tip-Ident quickly identifies the type of screw driver and screwdriver tip orientation.• Premium chrome plated for smooth feel and corrosion resistance.• Internal flanges inside handle provide solid, twist-resistant blade anchor.

Item # 10202527

CusHion griP sCreW-driVer, #2 x 8”• Klein insulated tools exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and are clearly marked with the official 1000-volt rating symbol• Precision-machined tip for exact fit

Item # 10202563

CusHion griP sCreW-driVer, 1/8” x 4”• Precision formed tip provides an exact fit for small screw applications• Premium chrome plated for smooth feel and corrosion resistance• Patented tip-ident quickly identifies the type of screw driver and screwdriver tip orientation• Cushion-grip handle allows for greater torque and comfort

Item # 10202452

10202398 3/16” x 4”10202399 3/16” x 6”


CusHion griP sCreWdriVer• Narrow cabinet tip permits blade access where space is limited• Premium chrome plated for smooth feel and corrosion resistance• Patented tip-ident quickly identifies the type of screwdriver and screwdriver tip orientation• Cushion-grip handle allows for greater torque and comfort

sCreWdriVer/nutdriVer• Interchangeable shaft holds 6 universal tips; converts to 3 nut driver sizes and 1 hex driver• 3-way ratcheting mechanism for forward, reverse and locked positions• Nut drivers are heat-treated for added strength and improved torque

Item # 10204508

10202401 Screwdriver, Cushion, 4” Demo10202403 Screwdriver, Cushion, 7” Demo


demo sCreWdriVer• Cushion-grip handle allows for greater torque and comfort• Internal flanges inside handle provide solid, twist-resistant blade anchor• Precision-machined tip for exact fit• Premium chrome plated for smooth feel and corrosion resistance• Meets or exceeds applicable ASME / ANSI specifications

CusHion griP sCreW-driVer, 1/4” x 4”• Precision formed tip provides an exact fit for small screw applications• Premium chrome plated for smooth feel and corrosion resistance• Patented tip-ident quickly identifies the type of screw driver and screwdriver tip orientation• Cushion-grip handle allows for greater torque and comfort

Item # 10202435

sCreWdriVer/nutdriVer, stubby• Interchangeable shaft holds 4 universal tips and converts to 2 nut driver sizes• Compact design allows easy access to tight work spaces• Cushion-Grip handles provide greater torque and comfort

Item # 10202388

10202400 1/4” x 4”10202402 5/16”x 6”


sCreWdriVer• Built to handle the tough jobs with ease• Hex bolster reinforces shank for hard use and allows wrench assisted turning

tamPer Proof driVer W/ bits• Heat treated, industrial strength steel bits offer lasting performance• Cushion-grip handle offers a comfortable, sure grip and optimal torque• Includes 1 magnetic screwdriver, 32 bits and 1 PVC bit storage block• Torx bits included: T7, T8, T10, T15, T20, T25, T27, T30 and T40• 32-piece tamperproof bit set holds nine TORX, 6 fraction hex, 5 metric hex, 4 spanner, 4 Tri-Wing and 3 TORQ- SET bits• Set also contains a 1/4 in. square to 1/4 in. hex adapter to drive sockets

Item # 10202452

taPPing tool, six-in-one• Quickly forms new threads, reforms burred threads and cleans out plaster obstructions• Each tap size rethreads to next larger size if threads are stripped• Two high-carbon steel taps are secured in reversible holder

Item # 10202485

Screwdrivers & Nutdrivers


Han

d To

ols

858-332-2133

straigHt PiPe WrenCH• Sturdy, cast-iron housing and I-beam handle with full floating forged hook jaw, nonstick adjustment nut and replaceable hook and heel jaws.

11300206 6” Iron Pipe Wrench11300207 8” Iron Pipe Wrench11300208 10” Iron Pipe Wrench11300209 12” Iron Pipe Wrench11300210 14” Iron Pipe Wrench11300211 18” Iron Pipe Wrench11300212 24” Iron Pipe Wrench


11800272 4” Adjustable Wrench11800273 6” Adjustable Wrench11800274 8” Adjustable Wrench11800269 10” Adjustable Wrench11800270 12” Adjustable Wrench11800271 15” Adjustable Wrench


adJustable WrenCH• Drop forged from alloy steel • Extra strength, and wear • Electronically induction hardened • Tension spring under knurl holds adjustment • Entire wrench is chromium plated •

Item # 41704177

adJustable sPud WrenCH• Adjustable Construction Wrench, Black• Black industrial finish• Extra torque driving power that also protects against fastener rounding

Item # 41704428

sPud ratCHet• 1/2-Inch square drive ratchet• 15-Inch overall length• 2-Inch swing arc• 45 teeth, 1-5/8-Inch head diameter

Item # 10203649

broad Head bull Pin• Forged, heat-treated bull pin increases efficiency by providing a larger striking surface.• Head design also reduces chance of pin slipping from the hand when aligning holes.• Angled head and smooth blending of radii increase strength and reduce the danger of chipping.• Long, even taper reduces binding and hang-up. Heat-treated for strength.

Wrenches


Hand Tools

70 858-332-2133

9” long nose loCking Pliers• 9” with a jaw adjustment up to 2 7/8”• Curved jaws, knurled tips and wire cutter• Lock on instantly and release quickly• Adjust to plier action• Long nose plier

Item # 10504602

12” large JaW Vise griP• Hardened teeth-designed to grip any angle and broached for maximum durability• Adjusting screw for exacting pressure-turn screw to adjust pressure and fit, stays adjusted for repetitive use• Heavy-duty jaw grips around work of all shapes; ideal for plumbers, mechanics, welders and others working with large objects• Wire cutter

Item # 10504603

10” CusHion griP loCking Pliers• Fast Release is 2x easier to open, has a no-pinch release, and offers more finger room• Curved jaw designed for use on Square, flat, round or hex surfaces. • Self-energizing lower Jaw is Ideal for tightening, clamping, twisting and turning and provides maximum grip• Turn screw to adjust pressure and fit work. Stays adjusted

Item # 10500066

straigHt JaW loCking • Locks instantly, releases quickly, and adjusts to plier action• Straight jaws allow for maximum contact on flat, square, or hex work•Excellent for welding and other metal work, for safer grinding or as a portable vise

10500063 10” Vise-Grip 10500065 11” Vise-Grip


4” CurVed JaW loCking Pliers• Curved jaw puts tremendous pressure on four points of any style nut or bolt head; includes convenient wire cutter• Ideal for tightening, clamping, twisting and turning• Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use• Constructed of high-grade heat-treated alloy steel for maximum toughness and durability• Guarded release trigger quickly unlocks and protects from accidental release

Item # 10500131

7” straigHt JaW loCking Pliers• Straight jaws provide maximum contact on flat, square, or hex work• Ideal for tightening, clamping, twisting and turning• Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use• Constructed of high-grade heat-treated alloy steel

Item # 10500144

Vise-griP• Convenient wire cutter cuts up to a 1/4” bolt• Curved jaw curve permits user to put tremendous pressure on four points of any style nut or bolt head• Curved jaw locking pliers with cutter 7” / 175mm

10504601 Vise Grip with Wire Cutter 7”10500064 Vise-Grip Pliers, 10”


7rr, PinCH-off tool• Pinches off and locks on to tubing• Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use• Constructed of high-grade heat-treated alloy steel for maximum toughness and durability• Classic trigger release designed to provide maximum locking force

Item # 10501220

Locking Pliers


Han

d To

ols

858-332-2133

extreme eleCtriCian’s bag• Orange interior for easy tool visibility• Wide center with removable pockets for easy access to tool• Tough, durable molded bottom protects from the element• 1680d ballistic weave for durability

Item # 10207876

bull-Pin & bolt bag, CanVas• Made from No. 4 canvas with a double bottom• Tunnel loop to connect to your belt• Bull-pin loop on each side• Belt Capacity: Up to 3-Inch (76mm) wide; Belt Connection: Tunnel loop

Item # 10202924

CanVas ziPPer bag• Canvas 100%• Depth/Height: 7-Inch , length: 12-1/2-Inch• No. 10 canvas bag with strong zipper.• Convenient storage for pliers, wrenches and other tools.• Cordura ballistic nylon• Klein offers a lifetime warranty on material defects and workmanship for the normal life of the product

Item # 10202924

Pro organizer baCkPaCk• 39 pockets for tons of tool storage• Orange interior for easy tool visibility• Wide opening fits power drills, meters, flashlights, etc.• Tough, durable molded bottom protects from the elements• Large front pocket easily fits fish tapes

Item # 10207874

straigHt-Wall buCket• No. 6 canvas• Black molded polypropylene bottom• Rope handle• High-density polyethylene top ring• Durable, straight-wall bucket with heavy-duty canvas

Item # 10207877

ultimate eleCtriCian’s bag• 55 pockets for ultimate tool storage• Orange interior for easy tool visibility• Wide opening fits power drills, meters, laptops, etc.• Tough, durable molded bottom protects from the elements• 1680d ballistic weave for durability

Item # 10207875

16” tool box WitH tray• New Low Profile• Graphite Gray and Black• Lift Out Tray• Heavy Duty Latches and Handle• Two removable organizers

Item # 31700641


Item # 31700627


Item # 31700644


Item # 31700646

Tool Storage


Hand Tools

72 858-332-2133

6 in 1 long nose Wire Pliers• Rust protection for longevity• Wire stripper can strip 10-14 AWG solid wire and 12-16 AWG stranded wire• Reaming head design helps you smooth edges of 1/2 in. to 1 in. metal pipe• Rust protection, increases tool life by reducing corrosion

Item # 10806305

6 in 1 diagnonal Pliers• Reaming head design-smooth edges of metal pipe from ½ in. to 1 in. (patent pending)• Bolt cutter-thread and cut #6 and #8 bolts to preferred length (patent pending)• High leverage design - For cutting power and performance• Laser hardened cutting edges,cuts hardened wire, acsr, bolts, screws, and nails• Offset head design,15 degree offset head for easier and quicker prying and pulling (patent pending)• Rust protection,increases tool life by reducing corrosion

Item # 10806306

6 in 1 lineman’s Pliers• Fish Tape Puller• High Leverage Design • Laser Hardened Cutting Edges • Smooth Transition Grips

Item # 10806307

6 in 1 Combination Pliers• Forged alloy steel for maximum strength• Rust protection for longevity• Wire stripper can strip 10-18 AWG solid wire and stranded wire• Reaming head design helps you smooth edges of 1/2 in. to 1 in. metal pipe• Bolt cutter lets you thread and cut #6 and #8 bolts to your preferred length

Item # 10806304

10” QuiCk adJust reaming Pliers• Forged alloy steel construction• Reaming head design helps smooth out rough edges of up to 2 in. pipe• Exposed reaming handles up to a 1 in. conduit• Quick-adjust V-notched jaws with up to 2 in. jaw capacity• Smooth transition grips

Item # 10806298

8” diagonal Pliers• Soft handle material on outer surface for comfort and a firm grip• Hard black material on inner surface and handle ends for toughness and durability• Cuts ACSR, screws, nails and most hardened wire• High-leverage

Item # 10200056

diagonal Cutting Plier, Hi-leVerage• Rivet is closer to the cutting edge for 36-Percent greater cutting power than other pliers designs• Cuts ACSR, screws, nails and most hardened wire; Features combination polished and black-oxide finish• Custom US-made tool steel• Heavy-duty cutting knives• 2000 Series

Item # 10202923

diagonal Pliers, angled Head, 8”• Standard cutting knives• High leverage design• Angled head design for easy work in confined spaces• Induction hardened cutting knives for long life

Item # 10202617

diagonal Pliers, midget, 5”• Shears wire up to 18 AWG producing a flat, flush cut• Shear cutting greatly reduces cutting effort and minimizes fly-off• Cushioned grips and steel return spring for increased comfort during repetitive cutting• Ultra slim profile increases access in confided areas• Heat treated for increased durability

Item # 10202617

diagonal Cutting Pliers, Hi-leV, 8• High-leverage design• Rivet is closer to the cutting edge for 36% greater cutting power than other pliers design• Red plastic-dipped handles• Standard cutting knives• 7/16” jaw thickness

Item # 10202612

Pliers


Han

d To

ols

858-332-2133

diagonal Cutting Pliers• Rivet is closer to the cutting edge for 36-Percent greater cutting power than other pliers designs• Cuts ACSR, screws, nails and most hardened wire; Features combination polished and black-oxide finish• Angled head design for easy work in confined spaces• Heavy-duty cutting knives• 2000 Series

Item # 10202588

8” lineman’s Pliers• Rivet is closer to the cutting edge for 36-Percent greater cutting power than other pliers designs• Cuts ACSR, screws, nails and most hardened wire; Features combination polished and black-oxide finish• Angled head design for easy work in confined spaces• Heavy-duty cutting knives• 2000 Series

Item # 10203008

9” lineman’s Pliers• High-leverage design provides 46-Percent greater cutting and gripping power than other pliers designs• Cuts ACSR, screws, nails and most hardened wire; Features combination polished and black-oxide finish• Streamlined design with sure-gripping, cross-hatched knurled jaws• Integral guards help prevent hand contact with conductive parts• Features combination polished and block-oxide finish

Item # 10203013

side-Cutting Pliers• Twists and cuts soft annealed rebar tie wire• Hook bend handle• Spring-loaded action for self-opening• Heavy-duty cutting knives• 2000 Series

Item # 10200052

9-1/2” side Cutting Pliers• High leverage design• Short jaws and beveled cutting edges permit close cutting of wire• Induction-hardened cutting knives for long life• Features combination polished and black-oxide finish• Hot-riveted joint ensures smooth action and no handle wobble

Item # 10205587

9-3/8” rebar Pliers• Heavy-duty knurled jaws• Hook bend handle• Twists and cuts soft annealed rebar tie wire• Spring-loaded action for self-opening

Item # 10202838

Hi-leVerage rebar Pliers• Rivet is closer to the cutting edge for 36-Percent greater cutting power than other pliers designs• Cuts ACSR, screws, nails and most hardened wire; Features combination polished and black-oxide finish• Twists and cuts soft annealed rebar tie wire• Heavy-duty cutting knives• 2000 Series

Item # 10202867

8-1/2” side Cutting Pliers• Induction hardened, long-lasting cutting knives• Cuts ACSR, screws, nails and most hardened wire; Features combination polished and black-oxide finish• Custom US-made tool steel• Precision-hardened pliers head for on-the-job toughness• Handform handles for full gripping and cutting power

Item # 10202868

9-9/32” side Cutting Pliers• Induction hardened, long-lasting cutting knives• Cuts ACSR, screws, nails and most hardened wire; Features combination polished and black-oxide finish• Custom US-made tool steel• Precision-hardened pliers head for on-the-job toughness• Handform handles for full gripping and cutting power

Item # 10202871

9-1/4” side-Cutting Pliers• Durable and reliable 9-inch side cutting pliers• High-leverage design• Plastic-dipped handles for added comfort• New England nose type

Item # 10200053

Pliers


Hand Tools

74 858-332-2133

long nose Pliers W/ side Cutter• Induction hardened, long-lasting cutting knives• Extended handles provide added reach and leverage• Custom US-made tool steel• Heavier design for greater cutting power• Slim head design for working in confined areas

Item # 10202607

long-nose Pliers, side Cutters• Induction hardened, long-lasting cutting knives• Extended handles provide added reach and leverage• Custom US-made tool steel• Heavier design for greater cutting power• Slim head design for working in confined areas

Item # 10204142

8-1/4” Cutter / CrimPer• Easy cuts and strips wire. Narrow, serrated pliers nose to pull, loop and bend wire• Long, curved cutting blades and cleanly shears bolts• Cutters and strippers are in front of the pivot for maximum ease-of-use in reaching into tight places• crimps insulated and non-insulated terminals and 7 to 8-mm ignition terminals• Plastic covered cushioned handles for comfort

Item # 10200040

9-3/4” CrimPer tool• Crimping die marked for insulated and non-insulated solderless terminals and connector• Tapered nose design for working in confined spaces• Specially hardened wire cutter in nose• Hot-riveted joint for smooth action and no handle wobble

Item # 10200039

adJustable Wire striPPer• Drop forged, hardened, and tempered construction• 2-layer insulation tested to 1000-volts• Cutting knives meet at the hinge first and meet at least 1/2 of the knife length• Smooth streamlined nose with knurled jaws• Sleeve-connector crimping die behind hinge• Pliers halves are matched side to side, jaw to jaw, and hot riveted• Precision machined, mating surfaces and design dimensions, to extremely close tolerances

Item # 10200049

multi-PurPose Wire striPPer/ Cutter• Strips six standard wire sizes without nicking wire• Scissors action of 1⁄2” (13 mm) wide cutter makes clean cuts with little effort• Serrated nose jaws to bend, shape, or pull wire; holes for looping wire ends

Item # 10204364

Wire striPPer-Cutter• Precision shear-type blades for clean cuts on solid and stranded copper wire; easy-to-read markings on both sides• Curved handles help reach into confined areas; wire looping and bending holes• Coil spring provides fast self-opening action; precision-ground stripping holes• Strong-gripping serrated nose; for easy bending, shaping and pulling of wire• Screw-shearing holes

Item # 10204373

Wire striPPer-Cutter, 10-18aWg• Hardened steel with precision ground stripping holes• Narrow nose fits into tight places• Compact, lightweight design• Color-coded, textured handles provide firm, comfortable grip• Constructed with wire looping and bending holes

Item # 10204365

Cable Cutter, HigH-leVerage• High leverage design for exceptional cutting capability.• Precision, one-hand shearing action.• Cable-gripping shear-type jaws.• Perfect for working in confined spaces.• Can be carried in most tool pouches.

Item # 10205591

ratCHeting Cable Cutter• Cleanly cuts copper up to 400 MCM, as well as aluminum and multi-conductor cables up to 600 MCM• Quick-release lever opens blade at anytime during operation• Not designed for cutting steel or ACSR

Item # 10202524

Strippers & Crimpers


Han

d To

ols

858-332-2133

Cable-sPliCer’s knife• Special-purpose short blade with comfortable, full-sized, heavy-duty handle.• Coping-type blade made of the finest cutlery steel, tough and carefully tempered to hold its edge.• Handle is textured for comfort and firm grip.• Hang hole for easy storage and portability.

Item # 10202394

CrimPing tool• Designed to crimp insulated and non-insulated 10 to 22 AWG solderless terminals and connectors• Tapered nose design for working in confined spaces• Contoured thumb area for additional comfort and positive feel• Specially hardened cutter• Hot-riveted joint ensures smooth action and no handle wobble

Item # 10202837

eleCtriCian’s sCissors, notCHed• Scraper and file on outside of both blades• Screw hinge permits adjustment• Overall Length: 5-1/4-Inch• Weight: 0.20-Pound• Klein offers a lifetime warranty on material defects and workmanship for the normal life of the product

Item # 10204434

tongue and grooVe Pliers• Right angle teeth that grip in all directions• Patented undercut tongue-and-groove design• Patented Permalock fastener eliminates nut & bolt failure• Channellock Blue comfort grips• 100% guaranteed against breakage and failure

11400222 6-1/2” Pliers11400219 9-1/2” Pliers11400223 10” Pliers11400225 12” Pliers11400228 16” Pliers


6” diagonal Pliers• Perfectly mated cutter, heat treated to hold it’s edge• Box joint design• Polished high carbon drop forged steel• Channellock blue comfort grips• 100-Percent guaranteed against breakage and failure

Item # 11400224

6” sliP Joint Plier• Thick nose pliers• Shear-type wire cutter• Precision made of fine polished, high carbon drop forged steel• Patented PermaLock fastener eliminates nut and bolt failures• Channellock Blue comfort grips

Item # 11400229

3-PieCe Plier set• 426 – 6.5” Tongue & Groove Plier• 420® – 9.5” Tongue & Groove Plier• 440® – 12” Tongue & Groove Plier

Item # 11400232

7” end Cut Pliers• Electronic coating to prevent rusting• Perfectly mated cutter, heat treated to hold its edge• Precision made of fine polished , high carbon drop forged steel• Channellock Blue comfort grips

Item # 11400217

9” linemans Pliers• Electronic coating to prevent rusting• Perfectly mated cutter, heat treated to hold its edge• Precision made of fine polished , high carbon drop forged steel• Channellock Blue comfort grips

Item # 11400216

Pliers & Crimpers


Hand Tools

76 858-332-2133

3 laser leVel tool• Accurate to +/- 1/4 of an inch at +/- 100-Feet• Includes the carrying pouch, floor stand, wall bracket, and a one year warranty• Lay out reference points faster than traditional, labor intensive construction levels• Self leveling range of 6 Degree• Operating time of + 30 hours continuous

Item # 44408035

5 laser leVel tool• Comes complete with pouch, pendulum layout target, magnetic wall bracket, floor stand, and carrying case• Leveling is automatic• Working range of +/- 100-Feet• Accuracy (all beams) of +/- 1/8 inch at 100-Feet• Leveling range is 6 Degree

Item # 44408032

laser leVel tool• Has the longest length of line and fan angles in the industry• Self leveling range of 6 Degree• Operates on 3 aa batteries for over 30 hours• Comes complete with carrying case, wall bracket, PLS180 pouch, batteries, and operating manual• Accuracy +/- 1/8-Inch at 30-Feet

Item # 99906713

Jogger 32x builders leVel• Choice of magnification: 20x/24x/28x or 32x • Automatic, air-damped compensator • Smooth, double-sided endless fine drive for easy and precise targeting • Horizontal circle with 360° division

Item # 99906820

dual grade laser• Fast, easy horizontal level, grade and vertical plumb setup with no manual leveling• Quick payback due to easy setups with the 2-way radio remote control, and single and dual grade application capability• No rework due to automatic temperature and grade compensation• Very long operating range - 2,600-ft diameter for increased machine control capability and fewer setups over the job site• Very rugged with low service costs, takes a drop of up to 3-ft onto concrete

Item # 99906946

rugby 320sg • Superior Power Management - For up to 130 hours of operation• Two-way Remote Control - Optional with the Rugby 320• Real-time Grade Matching• Simple, Easy to Use Keypad - With only 5 buttons• Rugged and Reliable

Item # 99903567

Lasers


Han

d To

ols

858-332-2133


34407424344020683440206634402065

24” Level32” Level48” Level72” Level


10504768105047661050476310504762

24” I Beam Level48” I Beam Level72” I Beam Level96” I Beam Level


105047671050476510504764

24” Magnetic I Beam Level48” Magnetic I Beam Level72” Magnetic I Beam Level

i-beam leVels• Rigid aluminum I-Beam construction• Rotating angle vial

9” magnetiC torPedo leVel• Die cast aluminum body • 1.5˚ integrated button• Rare earth magnets are 5X stronger than strip magnets and allow for easy hands-free steel construction work

Item # 10504769

12” magnetiC torPedo leVel• Pitch Vial to easily read slope• Reinforced aluminum frame for durability

Item # 10504771

aluminum line leVel• Durable aluminum body

Item # 10504770

10” magnetiC torPedo leVel• Die cast aluminum body • 1.5˚ integrated button• Rare earth magnets are 5X stronger than strip magnets and allow for easy hands-free steel construction work

Item # 34402067

HeaVy-duty leVel• Heavy-Duty Level w/Hand Holes


3440372334403777

Jamber Level Set, 32” and 78”Magnetic Jamber Level Set, 32” and 78”

Jamber leVel setDigitally displays degrees, percent slope and pitch to 1/10 degree accuracy. Features audio sound at level and plumb. Includes standard 9 volt battery.

digital 48” smart leVelDigitally displays degrees, percent slope and pitch to 1/10 degree accuracy. Features audio sound at level and plumb. Includes standard 9 volt battery.

Item # 37802642

Levels


Hand Tools

78 858-332-2133

25’ Fatmax Tape30’ Fatmax Tape35’ Fatmax Tape


116002441160024511602748

fatmax taPe measure• 11’ tape standout • 1-1/4” wide blade • BladeArmor coating on the first 6” • Top-forward blade lock • 16” and 19.2” stud center markings simplify framing jobs • Specially designed hook grabs on side, top or bottom for versatility

PoWerloCk taPe measure• 7’ standout • 1” wide blade • 16” and 19.2” stud center markings simplify framing jobs • Three-rivet, corrosion-resistant hook moves for accurate inside/outside measurements • Secure blade lock • Special Tru-Zero hook

25’ Powerlock Tape30’ Powerlock Tape35’ Powerlock Tape


116002421160024311600247

25’ Leverlock Tape30’ Leverlock Tape

1160024011600241

leVerloCk taPe measure• Unique power-return feature, with automatic bottom lock, streamlines tape operation • Special Tru-Zero hook • Belt clip on back of case


soniC laser taPe - 50’• Measures space instantly• 1” resolution• Accuracy - 99.5% +/- 1” at 50 feet• Calculations, centering and memory• Belt clip• LCD screen• Easy to use controls

Item # 10502416

laser distanCe meter

Item # 22202431

measuring WHeel • It’s easy to measure curved, horizontal and asymmetrical surfaces with its 0.318m diameter (1m circumference) wheel.• Weighs 2 pounds.• 5-digit, easy-read, magnified counter measures 9,999 meters and 9/10th Decimeter without resetting.• Three-section handle telescopes up to 38 inches • Handle telescopes down to 17 inches

Item # 19800548

Item # 36302358 Item # 36300275

engineer’s folding Wood rule• 1066D Rule is designed for engineer or other measurements requiring tenths and feet.• Graduated measurements in feet, 1/10ths and 1/100ths of feet. Regular outside marking in feet, inches and 1/16ths.• Decimal points on engineer’s scale prevent reading errors.• Clear abrasive-resistant coating protects markings.

3/4” x 300’ fiberglass taPe reel• Compact rewind handle won’t hit your knuckles - “No Knucklebuster”• Lightweight open reel is easy to handle and rewind.• Ultra flat 1/2” fiberglass blade resists kinking when rewinding• Positioning spike at tip shows measurement start point• Two position end hook for inside/outside measurements.

Measuring Tools

• Instant measurement with one-button operation• Easy targeting with bright laser• Quick calculation of area and volume• Easy addition and subtraction of measurements• Designed for indoor and outdoor use• 100’ range


Han

d To

ols

858-332-2133

CHalk reel Combo kit• 6X Faster than traditional chalk reels• 6:1 Gear ratio• Metal drive gear• Metal handle• Wide pronged hook• Nylon/Polyester braided line

Item # 10500135

Marking & Layout Products

marking Paint• This good, multipurpose purpose marking paint provides a very cost-effective approach to marking with good visibility• Spray on any surface• Self-cleaning tip• Mark lasts 2 months


15400422 Red15400426 Orange15400537 Flo Orange15400423 Yellow15400425 Green15400424 Blue15405511 Purple15402653 Black15400427 White15401042 Clear

105001371050013810500139

marking CHalkMarks are temporary


Marking Chalk, 8 oz. BlueMarking Chalk, 8 oz. OrangeMarking Chalk, 8 oz. Black


10503374105030241050337510503566

Marking Chalk, 5LB RedMarking Chalk, 5LB BlueMarking Chalk, 5LB Flo OrangeMarking Chalk, 5LB Black

marking CHalkMarks are temporary

Permanent staining CHalkVisible after weeks of weather exposure and jobsite wear


1050166710501673

5 LB Red5 LB Black

CHalk reel• Strait-Line Mach6 Chalk Reel• 100’• 6X Faster Than Traditional Chalk Reels• 6:1 Gear Ratio

Item # 10501230

marking CHalk• A special blend of raw materials that are safe on all surfaces and designed for temporary upside-down marking• Mark disappears in 10-20 days when exposed to water, traffic, and other abrasions• May also be washed off with a pressure washer


15402475 Orange15402473 Blue15402474 White


154004351540043415400438154004371540043915400433

RedYellowGreenBlueBlackWhite

striPing Paint• Solvent-based striping paint adheres to a variety of surfaces, including asphalt and concrete. Not recommended for turf surfaces.• Fast drying - 5 minutes to touch• Durable, long-lasting stripe• High-visibility colors• VOC compliant and lead-free• Excellent resistance to traffic, oil and gasoline• One case of aerosol paint will yield a 4-inch stripe approximately 700 linear feet• Asphalt black available to correct mistakes or cover existing lines

Vers-a-striPer - turf and dirt• A lightweight, yet heavy-duty aerosol striping paint applicator.• For use on turf and dirt surfaces• 8” diameter wheels for use on uneven ground and turf• Stripe widths up to 4”• Includes a striping alignment guide

Item # 15400440

Vers-a-striPer® - PaVement• A lightweight, yet heavy-duty aerosol striping paint applicator.• For use on hard surfaces such as asphalt and concrete• Stripe widths up to 4”• Includes a striping alignment guide and radius wheel for making smooth arcs

Item # 15400441


Hand Tools

80 858-332-2133

• Power Return• Mylar Protected Target• Stainless Steel Wear Guard

8oz brass Plumb bob• Polished lacquer• Dolid brass construction with replaceable, hardened steel tip. • Screw top simplifies attaching string to center of plumb and thru hole ensures easy tightening; durable and rust resistant.

Item # 11602894

surVey stake• 3/8” x 1-1/2” x 48”• 50 per bundle

Item # 91300466


9130046791300468

6” Hub8” Hub

Wood Hubs• 50 per box

1” x 3” Wood forming stake• Chiseled point for easy-to-use grading stakes• Ideal for concrete forms• 50 per bundle


913025779130257891302579

24” Wood Forming Stake30” Wood Forming Stake36” Wood Forming Stake

mason tWine


9030049190300489903004929030618190300490

1,110’ Pink1,110’ Orange1,110’ Yellow1,110’ Flo Yellow1,110’ White


3850289538502896

12’ HI VIS Gammon Reel24 Yard Gammon Refil Line

flagging taPe• 12 rolls per box


90700407907005939070462490700410907004099070040890700411

RedFlo OrangeYellowFlo YellowFlo BluePinkWhite

9030339890303399

550’ Pink550’ Yellow


907004039070040190700404907004009070039990700402

RedOrangeYellowGreenBluePink

stake CHaser• APWA color-coded stake chasers spring back up when run over mowers graders and heavy equipment.• Easily and conveniently attached to wood stakes or to 60D nails (sold seperately)• 25 per pack

Grading & Survey Supplies

12’ Hi Vis gammon reel

• Perfect for laying out masonry projects or as a chalk line• Specially designed to secure knots• Resists abrasion, chemicals, and rot


Han

d To

ols

858-332-2133

• The 3 in x 5 in notebooks are the truly go-anywhere, anytime, in any weather notebooks. The Pocket Notebooks are conveniently sized to take with you on your outings. With a Polydura cover and the Universal pattern, these 100 page (50 sheets) notebooks are perfect for any situation.

all WeatHer notePad

• The “professional’s” Bound Book - the only books manufactured with true outdoor durable components. • The cover, the paper, the sewn-in pages, even the glue is designed to survive the elements. This is a Fabrikoid Hard Bound Field book with 4 3/4 in x 7 1/2 in sewn pages. Classic Case Bound yet very durable!

WaterProof field bound book


3660251836602507

Waterproof Field Bound BookWaterproof Hard Bound Book


3660251636602517

Waterproof Notebook 3” x 5”Waterproof Notebook 4” x 6”

ProJeCt CalCulator• Enter feet-inch-fractions without changing to decimals• Use it to estimate quantities and costs for paint, concrete, tile, wallpaper and carpet• Convert between all standard math dimensions

Item # 20801566

ConstruCtion master • Construction math calculator designed for construction professionals• Performs common building formulas; area and volume calculations; works in various units, English/metric• Includes 2 3-volt lithium batteries, user guide, quick reference guide, protective slide cover

Item # 20801567


90300571 Red90300573 Yellow90300570 Green90300569 Blue90300572 White90300568 Black90307211 Wood Keel Holder

• 4-3/4 x 1/2 Hexagon. Pressed earth crayon of superior strength and durability. Our lumber crayons are made from hard clay base.

lumber Crayons / keel


16204458 Red16204459 Orange16204455 Yellow16204461 Green16204460 Blue16204462 Black16204456 White16204463 Pink

ValVe aCtion Paint marker

sHarPie Pens

CarPenter’s PenCil

Item # 90302334

Grading & Survey Supplies

• Valve Action is a fast-drying liquid paint marker that provides long-lasting, wear- and weather-resistant marks that are safe for almost any surface. As the most versatile liquid paint marker in the world, the xylene-free paint reduces user health risks and is available in 18 bold and fluorescent colors for accurate mark identification.


21602035 Black Chisel Tip, 2 / pack21600793 Fine Tip, Black21607197 Fine Tip, Red


Hand Tools

82 858-332-2133

underground deteCtable taPe danger and Caution taPe• 3” x 1000’ per roll

Warning flag Pennant marker flags

Item # 90305359

• 18” Face• 12” Wood Handle

stoP/sloW Paddle signs

Item # 90401227

• 18 1/4” x 5 1/8” x 4 1/2”• Orange and Red

triangle Warning kit

Item # 90401112

• Fluorescent Orange• 2 High-Intensity Reflective Collars (6” Upper, 4” Lower)• PVC Injection Molding Technology• 100% Recyclable• Stippled Inside to Eliminate Sticking• Black Base• Height: 28”

orange refleCtiVe Cone


9040145090401451

7 LB Base10 LB Base

delineators

Traffic & Underground Marking


90301094903010959030659490306593903065979030659590306596

2” x 1000’ “Buried Gas Line2” x 1000’ “Buried Electric Line3” x 1000’ “Buried Gas Line3” x 1000’ “Buried Electric Line3” x 1000’ “Buried Water Line3” x 1000’ “Buried Sewer Line3” x 1000’ Buried Fiber Optic Line


9030659990306598903066029030660090306601

6” x 1000’ “Buried Gas Line6” x 1000’ “Buried Electric Line6” x 1000’ “Buried Water Line6” x 1000’ “Buried Sewer Line6” x 1000’ Buried Fiber Optic Line

• All rolls are 1000 feet long• 5 mil total thickness• Solid aluminum foil core• Bright APWA approved colors with bold graphic warning• 35 lb. tensile strength


90300406 Danger Tape90300405 Caution Tape

• 24” x 24” • 3/4” x 36” Wood Handle

Item # 90406874


90401458 Knob Top90401454 8 LB Base90401455 12 LB Base

• 60’ Length• 36 Flags per String• Color: Red

• 48” Height• Two 3” high-intensity reflective bands for increased brightness and enhanced visibility • Knob-Top style provides ease of placement• Available with 8 or 12 lb bases (sold separately)• Meets NCHRP-350 category requirements

Documents

Hand Tools