Calibration

WIKA data sheet CT 11.01

Page 1 of 12WIKA data sheet CT 11.01 ∙ 04/2019

Data sheets showing similar products and accessories:Intrinsically safe hand-held pressure indicator (Ex version); model CPH62I0; see data sheet CT 11.02Hand-held pressure indicator; model CPH6300; see data sheet CT 12.01Test pumps, hydraulic; CPP series; see data sheet CT 91.05Hand test pump, pneumatic; model CPP30; see data sheet CT 91.06Calibration software; WIKA-Cal; see data sheet CT 95.10

for further approvals see page 5

Hand-held pressure indicator with reference pressure sensor (CPT6200)Model CPH6200-S1 (1-channel version)Model CPH6200-S2 (2-channel version)

Applications ■ Calibration service companies and service industry ■ Measurement and control laboratories ■ Pressure tests

Special features ■ Digital indicator with interchangeable pressure sensors

(plug-and-play) ■ Measuring ranges 0 ... 1,000 bar (0 ... 14,500 psi) ■ Type of pressure: Positive and negative overpressure,

absolute pressure and differential pressure ■ Accuracy: 0.2 %, optionally 0.1 % (incl. calibration

certificate) ■ Data logger for recording measured values

DescriptionExtensive application possibilitiesFor the hand-held pressure indicator model CPH6200, external reference pressure sensors of model CPT6200 with measuring ranges of up to 1,000 bar (14,500 psi) are available. Therefore, it is particularly suitable as a test instrument for applications such as process technology, machine building, etc. The digital indicator automatically detects the measuring range of the connected pressure sensor and guarantees a highly accurate pressure measurement.

FunctionalityThe CPH6200 can be used for measuring both gauge and absolute pressure. Differential pressure measurement is possible with the 2-channel version CPH6200-S2, and two connected model CPT6200 reference pressure sensors. Pressure units selectable on the instrument are: bar, mbar, psi, Pa, kPa, MPa, mmHg or inHg.

An integrated data logger and various other functions such as Min., Max., Hold, Tare, zero point adjustment, alarm, power-off, peak value detection (1,000 measurements/s), average value filter, etc. ensure that the CPH6200 can be used for many different applications.

SoftwareIn addition to the GSoft data logger evaluation software for the tabular and graphical representation of the logged data, WIKA-Cal calibration software for calibration tasks is also available. WIKA-Cal also offers, over and above PC-supported calibration, the management of the calibration and instrument data in an SQL database. A USB interface is available for the data transfer.

Model CPH6200-S1 hand-held pressure indicator with external model CPT6200 reference pressure sensor

WIKA data sheet CT 11.01 ∙ 04/2019 Page 2 of 12

Specifications

Hand-held pressure indicator model CPH6200Electrical connection for reference pressure sensor

Measuring inputs ■ 1 input for CPH6200-S1 ■ 2 inputs for CPH6200-S2

Sensor compatibility Compatible with model CPT6200 reference pressure sensorsConnection to CPH6200 6-pin, shielded Mini-DIN female connector with interlockingSensor connection cable Standard: Cable with 6-pin Mini-DIN connector and 7-pin bayonet connector, length 1.1 m (3.3 ft)

Option: Extension cable, length 3.8 m (12.5 ft), overall cable length approx. 5 m (16.4 ft)Indication

Display Large 4 1/2-digit LC display for indication of two pressure values and additional informationIndication range -19999 ... 19999 digits (dependent upon connected reference pressure sensor)Pressure types Dependent upon connected reference pressure sensor

■ Gauge pressure, absolute pressure or vacuum ■ Differential pressure measurement only with CPH6200-S2, and two model CPT6200 reference pressure sensors connected

Pressure units Freely selectable depending on the measuring range ■ bar ■ mbar ■ psi ■ Pa

■ kPa ■ MPa ■ mmHg ■ inHg

FunctionsMeasuring rate Measuring rate (can be set via menu)

■ 4/s (“Slo” - slow measurement) ■ 1,000/s filtered (“Fast” - fast measurement) ■ > 1,000/s unfiltered (“P.det” - peak value detection)

Mean value filter 1 ... 120 seconds (can be set via menu)Data logger ■ Individual value logger

⇒ Up to 99 recordings incl. time can be accessed via function button ■ Cyclic logger

⇒ automatic recording of up to 10,000 values incl. time ⇒ Cycle time freely adjustable in the range from 1 ... 3,600 seconds

Real-time clock for data logger, (can be set via menu)Min./Max. memory Minimum or maximum measured value (can be accessed via function button)Hold Holding the last measured value (can be accessed via function button)Tare Tare or zero point correction (can be accessed via function button)Alarm Alarm function (can be set via menu)

⇒ Min./Max. alarm (audible/visual)Sea level (barometric pressure) Sea level correction -200 ... +9999 m (can be set via menu)Power-Off function Automatic switch-off (can be set via menu)

■ activated (1 ... 120 minutes) ■ deactivated (no automatic switch-off of the instrument)

Complete test and service casesFor maintenance and service applications, various case systems are available. These include service cases with or without pressure generation, rechargeable battery, battery charger, connection adapter, etc.

Certified accuracyFor each reference pressure sensor, the accuracy for the complete measuring chain is certified by a factory calibration certificate which accompanies the instrument. On request, we can provide a DKD/DAkkS calibration certificate for this instrument.

WIKA data sheet CT 11.01 ∙ 04/2019 Page 3 of 12

Hand-held pressure indicator model CPH6200Voltage supply

Power supply 9 V battery, alternatively 9 V rechargeable battery or mains supplyBattery life > 300 hours of operation (1 sensor with a measuring rate of 4/s)

Permissible ambient conditionsOperating temperature -10 ... +50 °C (14 ... 122 °F)Storage temperature -20 ... +70 °C (-4 ... +158 °F)Relative humidity 0 ... 95 % r. h. (non-condensing)

Output signals/interfacesSerial interface RS-232 or USB (instrument-specific interface cable required)Analogue output DC 0 ... 1 V; configurable (can be activated via menu as an alternative to the serial interface,

instrument-specific connection cable required)Connection Stereo jack connector, 3.5 mm

CaseMaterial impact-resistant ABS plastic, membrane keyboard, transparent screenDimensions See technical drawingWeight approx. 160 g (0.35 lbs) (incl. battery)

Reference pressure sensor model CPT6200Measuring range

Gauge pressure mbar -600 ... 0 1) -600 ... +600 1) -400 ... 0 1) -400 ... +400 1) -250 ... 0 1)

-250 ... +250 1) -100 ... +100 1) -19.99 ... +60 1) 2) -19.99 ... +40 1) 2) -19.99 ... +25 1) 2)

0 ... 25 1) 2) 0 ... 40 1) 2) 0 ... 60 1) 2) 0 ... 100 1) 0 ... 160 1)

0 ... 250 0 ... 400 0 ... 600bar -1 ... 0 1) -1 ... 1.5 1) -1 ... 3 1) -1 ... 5 1) -1 ... 9 1)

-1 ... 15 1) -1 ... 24 1) -1 ... 39 1) 0 ... 1 0 ... 1.60 ... 2.5 0 ... 4 0 ... 6 0 ... 10 0 ... 160 ... 25 0 ... 40 0 ... 60 0 ... 70 0 ... 1000 ... 160 0 ... 250 0 ... 400 0 ... 600 0 ... 1,000

psi -15 ... 0 1) -15 ... +15 1) -15 ... +40 1) -15 ... +70 1) -15 ... +130 1)

-3 ... +3 1) -5 ... +5 1) -8 ... +8 1) -8 ... 0 1) -5 ... 0 1)

-3 ... 0 1) 0 ... 5 0 ... 10 0 ... 15 0 ... 200 ... 30 0 ... 50 0 ... 100 0 ... 150 0 ... 2000 ... 300 0 ... 500 0 ... 1,000 0 ... 1,500 0 ... 2,0000 ... 3,000 0 ... 6,000 0 ... 8,000 0 ... 14,500

Absolute pressure 1) mbar abs. 0 ... 250 0 ... 400 0 ... 600bar abs. 0 ... 1 0 ... 1.2 0 ... 1.6 0 ... 2.5 0 ... 4

0 ... 6 0 ... 10 0 ... 16 0 ... 25 0.8 ... 1.2psi abs. 0 ... 5 0 ... 10 0... 15 0 ... 20 0 ... 30

0 ... 50 0 ... 100 0 ... 150 0 ... 200Overpressure safety 3 times; ≤ 25 bar

2 times; > 25 bar ... ≤ 600 bar1.5 times; > 600 bar

3 times; ≤ 360 psi2 times; > 360 psi ... ≤ 8,700 psi1.5 times; > 8,700 psi

1) Not available as oxygen version.2) Exclusively suitable for use with dry, gaseous and non-aggressive media. Not possible as flush version.3) As an oxygen version or oil- and grease-free version, a flush diaphragm model is not available.4) It is defined by the total measurement uncertainty, which is expressed with the coverage factor (k = 2) and includes the following factors: the intrinsic performance of the instrument, the

measurement uncertainty of the reference instrument, long-term stability, influence of ambient conditions, drift and temperature effects over the compensated range during a periodic zero point correction.

5) Reference conditions: 15 ... 25 °C (59 ... 77 °F)

WIKA data sheet CT 11.01 ∙ 04/2019 Page 4 of 12

Reference pressure sensor model CPT6200Process connection

G ½ B for all measuring rangesG ½ B flush 3) for measuring ranges > 1.6 ... < 1,000 bar and bar abs.

for measuring ranges > 20 ... < 14,500 psi and psi abs.G 1 B flush 3) for measuring ranges ≥ 0.1 ... ≤ 1.6 bar and bar abs.

for measuring ranges > 5 ... ≤ 20 psi and psi abs.Adapters various connection adapters on request

MaterialWetted parts Measuring ranges ≥ 0.1 ... 25 bar (≥ 1.45 ... 360 psi)

■ Stainless steel or ■ Elgiloy®

Measuring ranges > 25 bar (> 360 psi) ■ Stainless steel and sealing NBR or ■ Elgiloy® and sealing from NBR

Measuring ranges < 100 mbar (< 1.45 psi) ■ Stainless steel ■ Silicium ■ Aluminium

■ Gold ■ Silicone

Oxygen version, measuring ranges ≥ 0.25 bar (≥ 0.4 psi) ■ Stainless steel or ■ Elgiloy®

Flush version ■ Stainless steel with O-ring from NBR or ■ Stainless steel with O-ring from EPDM or ■ Hastelloy C4 with O-ring from NBR or ■ Hastelloy C4 with O-ring from EPDM

Pressure transmission medium

for measuring ranges to ≤ 16 bar (≤ 250 psi) synthetic oilfor flush version synthetic oilfor oxygen version halocarbon oil

Permissible ambient conditionsMedium temperature ■ -30 ... +100 °C (-22 ... +212 °F)

■ -10 … +50 °C (14 ... 122 °F) (only for oxygen version)Operating temperature -20 ... +80 °C (-4 ... +176 °F)Storage temperature -40 ... +100 °C (-40 ... +212 °F)Relative humidity 0 ... 95 % r. h. (non-condensing)

CaseMaterial Stainless steelIngress protection ■ IP65

■ IP67 when connectedDimensions See technical drawingWeight approx. 220 g (0.49 lbs)

Accuracy of the measuring chain 4)

■ 0.2 % FS ■ 0.1 % FS at reference conditions 5) (not for measuring ranges < 100 mbar (< 1.45 psi))

Mean temperature coefficient

≤ 0.2 % of span/10 K (outside the reference conditions) 5)

Compensated range 0 ... 80 °C (32 ... 176 °F)1) Not available as oxygen version.2) Exclusively suitable for use with dry, gaseous and non-aggressive media. Not possible as flush version.3) As an oxygen version or oil- and grease-free version, a flush diaphragm model is not available.4) It is defined by the total measurement uncertainty, which is expressed with the coverage factor (k = 2) and includes the following factors: the intrinsic performance of the instrument, the

measurement uncertainty of the reference instrument, long-term stability, influence of ambient conditions, drift and temperature effects over the compensated range during a periodic zero point correction.

5) Reference conditions: 15 ... 25 °C (59 ... 77 °F)

WIKA data sheet CT 11.01 ∙ 04/2019 Page 5 of 12

Approvals

Logo Description CountryEU declaration of conformity for CPH6200

■ EMC directiveEN 61326 emission (group 1, class B) and immunity (portable equipment)

■ RoHS directive

European Union

EU declaration of conformity for CPT6200 ■ EMC directiveEN 61326 emission (group 1, class B) and immunity (portable equipment)

■ Pressure equipment directiveModule A, internal production control

■ RoHS directive

European Union

EAC (option) ■ EMC directive ■ Pressure equipment directive ■ Low voltage directive

Eurasian Economic Community

GOST (option)Metrology, measurement technology

Russia

KazInMetr (option)Metrology, measurement technology

Kazakhstan

- MTSCHS (option)Permission for commissioning

Kazakhstan

UkrSEPRO (option)Metrology, measurement technology

Ukraine

Uzstandard (option)Metrology, measurement technology

Uzbekistan

- CPA (option)Metrology, measurement technology

China

Certificates

CertificateCalibration Standard: 3.1 calibration certificate per DIN EN 10204

Option: DKD/DAkkS calibration certificateRecommended recalibration interval 1 year (dependent on conditions of use)

Approvals and certificates, see website

WIKA data sheet CT 11.01 ∙ 04/2019 Page 6 of 12

27

Ø 27 (Ø 1.06)

88.5

(3.4

8)

28.5

+0.3

(1.1

2 +0

.01 )

20 (0

.79)

3 (0

.12)

3 (0

.12)

G 1/2 B

Ø 17.5(Ø 0.69)

Ø 6 (Ø 0.24)

142

(5,5

9)

71 (2,80)

25 (0,98)

36 (1,42)

142

(5,5

9)

71 (2,80)

25 (0,98)

36 (1,42)

Dimensions in mm (in)

Reference pressure sensor CPT6200

Digital indicator CPH6200-S1 Digital indicator CPH6200-S2

12

Electrical connections

134

Model CPH6200-S1

Model CPH6200-S2

1 Interface connector2 Connection channel 1 (only with CPH6200-S1)3 Connection channel 2 (only with CPH6200-S2)4 Connection channel 1 (only with CPH6200-S2)

WIKA data sheet CT 11.01 ∙ 04/2019 Page 7 of 12

Instrumenton/off

MAX functionon/off

2 sec. Delete MAX value

TARE functionon

2 sec. TARE functionoff

5 sec. Zero point adjustment on

10 sec. Zero point adjustment off

MIN functionon/off

2 sec. Delete MIN value

Change the secondary display

CH1 <-> CH2 <-> DIF(only for 2-channel)

2 sec. Main menuEnter configuration

if:Hold function

on/off A

Store measured value

B2 sec. Clear memory?

2 sec. Store cyclically

C2 sec. Stop storage?

2 sec. Clear memory?

A = Logger functions deactivatedB = Logger function “Store measured value” activated via menuC = Logger function “Store cyclically” activated via menu

6

6

7

1

2

45 3

= Press button

2 sec. = Press button for 2 seconds

For more information: See operating instructions

Operating functions of the models CPH6200-S1 and CPH6200-S2

1- and 2-channel version with external pressure sensors

Keyboard

DisplayDisplay 1 Main display: Current measured value for sensor 1

2 Secondary display: Current measured value for sensor 2 or differential value between sensor 1 and sensor 2

3 Logg arrow: Logger is readyArrow blinking: Automatic recording (Logg CYCL) active

4 Tare arrow: Tare function was activated

5 SL arrow: Altitude correction (sea level) was activated

6 Display arrows for measured value units

7 Indicating elements for Min./Max. measured value illustration

WIKA data sheet CT 11.01 ∙ 04/2019 Page 8 of 12

Complete test and service cases

The available test and service cases are individually equipped according to your needs.A distinction is made between 5 different variants, which differ in the case size and the number or size of the recesses.

Case variants and existing recesses 11) 2 3 4 5Recesses for standard components

Hand-held pressure indicator, either model CPH6200-S1 or CPH6200-S2 x x x x xSensor connection cable 1.1 m (3.3 ft) x x x x x9 V battery x x x x xSealing set x x x x xNumber of freely selectable reference pressure sensors, model CPT6200 3 5 5 5 5Pneumatic hand test pump, either model CPP30 or CPP7-H xHydraulic hand test pump, either model CPP700-H or CPP1000-H xHydraulic hand spindle pump model CPP1000-L xHand-held temperature measuring instrument, model CTH6200 xNumber of freely selectable temperature probes, model CTP62x0 2

Recesses for additional accessoriesSensor extension cable 3.8 m (12.5 ft) x x x x x9 V rechargeable battery and charger x x x x xPower supply unit x x x x xInterface cable x x x x xGSoft data logger evaluation software x x x x xUSB dongle for WIKA-Cal calibration software x x x x x

1) Due to its size, this case model may not provide enough space for all available accessories. We will be happy to help you choose the best equipment for your case set.

Variant 1: Calibration case with max. 3 pressure sensors

and/or

Variant 5: Calibration case with two hand-helds (pressure and/or temperature) and matching accessories

Variant 2 or 3: Calibration case with max. 5 pressure sensors and incl. hand test pump

Variant 4: Calibration case with max. 5 pressure sensors and incl. hand spindle pump

WIKA data sheet CT 11.01 ∙ 04/2019 Page 9 of 12

Charts toolbar

Data export e.g. in an Excel® file

1 2 3 4 5 6 7 8 9 10 11 12 13

The GSoft data logger evaluation software is used to display the logger data of the model CPH6200 hand-held pressure indicator on a PC in tabular form and as chart.

■ Easy operation with self-explanatory toolbars ■ Data from the pressure and temperature hand-helds

(CTH6200) can be displayed in a single chart (two separate y-axes)

■ Chart offers a zoom function ■ Operation of the logger function via PC (remote control) ■ Data can be exported (Excel®, etc.) ■ Languages: German, English, French, Spanish and Czech

System requirements, GSoft version 3.2 ■ IBM compatible PC (Pentium®) ■ At least 20 MB free hard disc space ■ CD-ROM drive ■ At least 32 MB RAM ■ Windows® operating system 95, 98, NT 4.0 (with Service

Pack 3.0 or higher), 2000, XP, Vista 7, 8, 8.1 or 10 ■ Mouse ■ USB port (via interface cable)

Windows® is a registered trademark of Microsoft Corporation in the United States and other countries.

GSoft data logger evaluation software

Easy operation with self-explanatory icon buttons

1 File functions: Open, save, print2 Logger functions: Start communication, start logger, stop,

read data3 Data display: Create chart4 Interface configuration5 Program information6 Settings: Grid and colour settings, manual zooms

7 Zoom: All, left or right y-axis (via mouse), back8 Rename chart9 Cursor on/off (info footer)10 Legend on/off11 (Measuring point) Symbols on/off12 Measurement series (add/delete)13 Comments on measuring points (add/delete)

Main toolbar

WIKA data sheet CT 11.01 ∙ 04/2019 Page 10 of 12

WIKA-Cal calibration software serves for the creation of calibration certificates or logger protocols for pressure measuring instruments. A demo version is available for free download.To switch from the demo version to a licenced version, a USB dongle with a valid licence must be purchased.The pre-installed demo version changes automatically to the selected version when plugging in the USB dongle and remains available as long as the USB dongle is connected to the PC.

■ The user is guided through the calibration or logger process

■ Management of calibration data and instrument data ■ Intelligent preselection via SQL database ■ Menu languages: German, English, Italian, French,

Dutch, Polish, Portuguese, Romanian, Spanish Swedish, Russian, Greek, Japanese, ChineseMore languages will be due with software updates

■ Customer-specific complete solutions possible ■ Maximum degree of automation in connection with our

CPC series

The supported instruments are continuously expanded and even customer-specific adaptations are possible.

For further information see data sheet CT 95.10

WIKA-Cal calibration softwareEasy and fast creation of a high-quality calibration certificate

The WIKA-Cal calibration software is available both for reading the logger data stored in the CPH6200 as well as for online calibrations together with a PC. The scope of software functions depends on the selected licence. Several licences can be combined on one USB dongle.

Two WIKA-Cal licences are available together with model CPH6200

Cal-Template (light version) Log-Template (full version) ■ Semi-automated creation of calibration certificates for mechanical and electronic pressure measuring instruments

■ Calibration certificate creation 3.1 in accordance with DIN EN 10204

■ Calibration reports can be exported to Excel® template or XML file

■ Live measurement recording for a certain period of time with selectable interval, duration and start time

■ Readout of the integrated data logger of the CPH6200 ■ Creation of logger reports with graphic and/or tabular representation of the measurement results in PDF format

■ Export of measurement results as CSV file possible

Ordering information for your enquiry:WIKA-CAL-LZ-Z-Z WIKA-CAL-ZZ-L-Z

WIKA-CAL-LZ-L-Z

WIKA data sheet CT 11.01 ∙ 04/2019 Page 11 of 12

Accessories

Description Order codeCPH-A-62-

9 V battery -B-9 V rechargeable battery -A-

Charger for 9 V rechargeable battery and 2 rechargeable AAA batteriesEuro standard -1-UK standard -2-US standard -3-

Power supply unitEuro standard -4-UK standard -5-US standard -6-

Sealing setConsisting of 4 x G ½ USIT seals, 2 x G ¼ USIT seals and plastic box

-D-

Plastic caseVariant 1for 1 x hand-held, max. 3 x pressure sensors, accessoriesDimensions: 340 x 275 x 83 mm (13.39 x 10.83 x 3.27 in)

-K-

Variant 2for 1 x hand-held, max. 5 x pressure sensors, 1 x pneumatic hand test pump CPP7-H or CPP30, accessoriesDimensions: 450 x 360 x 123 mm (17.72 x 13.78 x 4.84 in)

-L-

Variant 3for 1 x hand-held, max. 5 x pressure sensors, 1 x hydraulic hand test pump CPP700-H/CPP1000-H, accessoriesDimensions: 450 x 360 x 140 mm (17.72 x 13.78 x 5.51 in)

-N-

Transport case from aluminiumVariant 4for 1 x hand-held, max. 5 x pressure sensors, 1 x hydraulic hand spindle pump CPP1000-L, accessoriesDimensions: 375 x 425 x 170 mm (14.76 x 16.73 x 6.69 in)

-M-

Variant 5for 2 x hand-held pressure and/or temperature, max. 5 x pressure sensors, max. 2 x temperature probes, accessoriesDimensions: 450 x 345 x 145 mm (17.72 x 13.58 x 5.71 in)

-O-

CableSensor connection cable, approx. 1.1 m (3.3 ft)

-S-

Extension cable for connection of sensors, approx. 3.8 m (12.5 ft) to approx. 5 m (16.4 ft)

-V-

2-core connection cable with loose ends (end splices) for connecting the configurable analogue output, approx. 2 m (6.6 ft)

-E-

Interface cablefor RS-232 interfaces

-R-

WIKA data sheet CT 11.01 ∙ 04/2019 Page 12 of 12

© 02/2003 WIKA Alexander Wiegand SE & Co. KG, all rights reserved.The specifications given in this document represent the state of engineering at the time of publishing.We reserve the right to make modifications to the specifications and materials.

04/2

019

EN

WIKA Alexander Wiegand SE & Co. KGAlexander-Wiegand-Straße 3063911 Klingenberg/GermanyTel. +49 9372 132-0Fax +49 9372 132-406info@wika.dewww.wika.de

Scope of delivery ■ Hand-held pressure indicator model CPH6200-S1, incl.

9 V battery ■ One sensor connection cable per channel ■ 3.1 calibration certificate per DIN EN 10204 ■ Optional CPT6200 reference pressure sensors (must be

ordered separately)

Options ■ Hand-held pressure indicator model CPH6200-S2:

2-channel version (differential pressure measurement possible via 2 connected model CPT6200 reference pressure sensors)

■ DKD/DAkkS calibration certificate ■ Sensors for oxygen applications

Ordering informationCPH6200 / Instrument version / Additional cable for reference pressure sensor / Power supply unit / Rechargeable battery and battery charger / Software / Interface cable / Test pump / Transport case / Further approvals / Additional ordering information

CPT6200 / Unit / Measuring range / Accuracy / Process connection / Special design features / Type of certificate / Further approvals / Additional ordering information

Model CPH6200-S2 hand-held pressure indicator with two external model CPT6200 reference pressure sensors

Description Order codeCPH-A-62-

Interface cablefor USB interfaces

-U-

GSoft data logger evaluation software -G-

Ordering information for your enquiry:1. Order code: CPH-A-622. Option:

⇓[ ]