Embed Size (px)
Citation preview
Hand controlledmagnetic lifters for thingage ferrous loadsThe easiest, safest and most effi cient way to handle low thickness sheets and tubes
®
Safety through Power
POWERFULL - STRONG - COMPACT
FACTOR 3SAFETY
FACTOR 3
New
MaxX TG 300
MaxX TG 150
Maxx tg the evolution of the speciesThe special design of the polar surface together with a proper balancing of the magnetic masses located in the stator and in the rotor, has enabled to achieve an optimal concentration and distribution of the magnetic strength all over the contact area of the load, and thus allowing an easier rotation of the handle whilst keeping the characteristics of safety and reliabilityof all the maxx lifters unchanged.
• solid block construction
• high power rare heart permanent magnets
• special treatment on all surfaces for corrosion and wear protection
skimming from 4 mm
pipelifting
MA
XTG
-IN
G-2
004/
30/0
9
Safety through Power
Head office:TECNOMAGNETE spaVia Nerviano 31 - 20020 Lainate (MI) - Italy Tel. +39-02.937.591, Fax +39-02.935.708.57e-mail: [email protected]
www.tecnomagnete.com
Subsidiaries:France: TECNOMAGNETE S.A.R.L.Germany: TECNOMAGNETE GmbH Japan: TECNOMAGNETE Ltd Sweden: TECNOMAGNETE AB P.R. China: TECNOMAGNETE R.O.USA: TECNOMAGNETE Inc.
unit liftingfrom stack
THE EVOLUTION OF THE SPECIES
special poles confi guration
Max load capacity with MFB 500 beamSheets Tubes
weight (kg) length (mm) width (mm) weight (kg) length (mm)
with 2 MaxX TG 150 200 3000 1500 100 3000
with 2 MaxX TG 300 500 3000 1500 200 3000
MaxX TG performanceForce Load max Thick. min Ø max Length. max
kg plate kg round kg mm mm mm
MaxX TG 150 450 150 60 8 240 1500
MaxX TG 300 900 300 120 10 290 2000
MaxX TG dimensions and weightA B C D E F G H Weight
mm mm mm mm mm mm mm mm kg
MaxX TG 150 142 130 31 79 189 170 43 35 6
MaxX TG 300 190 165 39 106 250 230 60 52 16
80
800100100 100100
16001680
130
300
Max load capacity kg 500 Weight kg 37
Fixed mini beam MFB 500
Distributor
300 900
225 675
150 450
75 225
0 0.25 0.5 0.75 0 5 10
500
1000
MaxX TG 150
MaxX TG 300
MaxX TG 150
MaxX TG 300
AIR-GAP (mm)
FORCE DaN LOAD KG.
THICKNESS (mm)
FOR
CE
(daN
)300 900
225 675
150 450
75 225
0 0.25 0.5 0.75 0 5 10
500
1000
MaxX TG 150
MaxX TG 300
MaxX TG 150
MaxX TG 300
AIR-GAP (mm)
FORCE DaN LOAD KG.
THICKNESS (mm)
FOR
CE
(daN
)
Force - Air-gap Performance curves with changing load thickness (plate)
MaxX TG
CMYN
Hand controlledmagnetic lifters for thingage ferrous loadsThe easiest, safest and most effi cient way to handle low thickness sheets and tubes
®
Safety through Power
POWERFULL - STRONG - COMPACT
FACTOR 3SAFETY
FACTOR 3
New
MaxX TG 300
MaxX TG 150
Maxx tg the evolution of the speciesThe special design of the polar surface together with a proper balancing of the magnetic masses located in the stator and in the rotor, has enabled to achieve an optimal concentration and distribution of the magnetic strength all over the contact area of the load, and thus allowing an easier rotation of the handle whilst keeping the characteristics of safety and reliabilityof all the maxx lifters unchanged.
• solid block construction
• high power rare heart permanent magnets
• special treatment on all surfaces for corrosion and wear protection
skimming from 4 mm
pipelifting
MA
XTG
-IN
G-2
004/
30/0
9
Safety through Power
Head office:TECNOMAGNETE spaVia Nerviano 31 - 20020 Lainate (MI) - Italy Tel. +39-02.937.591, Fax +39-02.935.708.57e-mail: [email protected]
www.tecnomagnete.com
Subsidiaries:France: TECNOMAGNETE S.A.R.L.Germany: TECNOMAGNETE GmbH Japan: TECNOMAGNETE Ltd Sweden: TECNOMAGNETE AB P.R. China: TECNOMAGNETE R.O.USA: TECNOMAGNETE Inc.
unit liftingfrom stack
THE EVOLUTION OF THE SPECIES
special poles confi guration
Max load capacity with MFB 500 beamSheets Tubes
weight (kg) length (mm) width (mm) weight (kg) length (mm)
with 2 MaxX TG 150 200 3000 1500 100 3000
with 2 MaxX TG 300 500 3000 1500 200 3000
MaxX TG performanceForce Load max Thick. min Ø max Length. max
kg plate kg round kg mm mm mm
MaxX TG 150 450 150 60 8 240 1500
MaxX TG 300 900 300 120 10 290 2000
MaxX TG dimensions and weightA B C D E F G H Weight
mm mm mm mm mm mm mm mm kg
MaxX TG 150 142 130 31 79 189 170 43 35 6
MaxX TG 300 190 165 39 106 250 230 60 52 16
80
800100100 100100
16001680
130
300
Max load capacity kg 500 Weight kg 37
Fixed mini beam MFB 500
Distributor
300 900
225 675
150 450
75 225
0 0.25 0.5 0.75 0 5 10
500
1000
MaxX TG 150
MaxX TG 300
MaxX TG 150
MaxX TG 300
AIR-GAP (mm)
FORCE DaN LOAD KG.
THICKNESS (mm)
FOR
CE
(daN
)300 900
225 675
150 450
75 225
0 0.25 0.5 0.75 0 5 10
500
1000
MaxX TG 150
MaxX TG 300
MaxX TG 150
MaxX TG 300
AIR-GAP (mm)
FORCE DaN LOAD KG.
THICKNESS (mm)
FOR
CE
(daN
)
Force - Air-gap Performance curves with changing load thickness (plate)
MaxX TG
CMYN
