21
Page 1 of 21 Disclaimer: Products in this specification manual must by regulation be installed by licensed and registered trade people. The manufacturer/distributor reserves the right to vary specifications or delete models from their range without prior notification. Dimensions are nominal measurements only. Dimensions and set-outs listed are correct at time of publication however the manufacturer/distributor takes no responsibility for printing errors. Published 06/11/2020 Technical Guide Halo II Vanity Unit To see the complete Issy range go to www.reece.com.au/bathrooms SPECIFICATIONS Recommended Use Domestic, Hotel & Commercial Vanity Cabinet Material American Oak veneer (19mm) Vanity Frame Material 2 Pack Polyurethane on High Moisture Resistant MDF Drawer Design Touch release drawer/s opening with soft close drawer/s Benchtop Material Corian (12mm) Colour Variations (Prices may vary) Please refer to the Colour, Finish and Material Variations Document on the Website for more information. Fixing Bolted / Screwed to Wall by a Licensed Trades Person (not included) Basin Sold Separately, refer to Brochure Tapware Sold Separately. Compatible with Wall mounted tapware STANDARD SIZES H2-VU500 H2-VU600 H2-VU1000 H2-VU1200 H2-VU1500 H2-VU1800 Width (mm) 500 600 1000 1200 1500 1800 Depth (mm) 450 450 450 450 450 450 Height (mm) 320 320 320 320 320 320 Number of Drawers 1 1 2 2 3 3 Basin Options 1 1 1 1 1-2 1-2 CUSTOM SIZES H2-VU501-600 H2-VU601-800 H2-VU801-1100 H2-VU1101-1300 H2-VU1301-1600 H2-VU1601-1800 H2-VU1801-2000 Width (mm) 501-601 601-800 801-1100 1101-1300 1301-1500 1601-1800 1801-2000 Depth (mm) 400-500 400-500 400-500 400-500 400-500 400-500 400-500 Height (mm) 320 320 320 320 320 320 320 Number of Drawers 1 1 2 2 4 4 4 Basin Options 1 1 1 1 1-2 1-2 1-2

HALO II VANITY UNIT€¦ · Number of Drawers 1 1 2 2 3 3 Basin Options 1 1 1 1 1-2 1-2 CUSTOM SIZES 501-600 601-800 801-1100 1101-1300 1301-1600 1601-1800 1801-2000 Width (mm) 501-600

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Page 1: HALO II VANITY UNIT€¦ · Number of Drawers 1 1 2 2 3 3 Basin Options 1 1 1 1 1-2 1-2 CUSTOM SIZES 501-600 601-800 801-1100 1101-1300 1301-1600 1601-1800 1801-2000 Width (mm) 501-600

Page 1 of 21

Disclaimer: Products in this specification manual must by regulation be installed by licensed and registered trade people. The manufacturer/distributor reserves the right to vary specifications or delete models from their range without prior notification. Dimensions are nominal measurements only. Dimensions and set-outs listed are correct at time of publication however the manufacturer/distributor takes no responsibility for printing errors.

Published 06/11/2020

Technical Guide

Halo II Vanity Unit

To see the complete Issy range go to www.reece.com.au/bathrooms

SPECIFICATIONSRecommended Use Domestic, Hotel & Commercial

Vanity Cabinet Material American Oak veneer (19mm)

Vanity Frame Material 2 Pack Polyurethane on High Moisture Resistant MDF

Drawer Design Touch release drawer/s opening with soft close drawer/s

Benchtop Material Corian (12mm)

Colour Variations (Prices may vary)

Please refer to the Colour, Finish and Material Variations Document on the Website for more information.

Fixing Bolted / Screwed to Wall by a Licensed Trades Person (not included)

Basin Sold Separately, refer to Brochure

Tapware Sold Separately. Compatible with Wall mounted tapware

STANDARD SIZES H2-VU500 H2-VU600 H2-VU1000 H2-VU1200 H2-VU1500 H2-VU1800Width (mm) 500 600 1000 1200 1500 1800

Depth (mm) 450 450 450 450 450 450

Height (mm) 320 320 320 320 320 320

Number of Drawers 1 1 2 2 3 3

Basin Options 1 1 1 1 1-2 1-2

CUSTOM SIZES H2-VU501-600 H2-VU601-800 H2-VU801-1100 H2-VU1101-1300 H2-VU1301-1600 H2-VU1601-1800 H2-VU1801-2000

Width (mm) 501-601 601-800 801-1100 1101-1300 1301-1500 1601-1800 1801-2000

Depth (mm) 400-500 400-500 400-500 400-500 400-500 400-500 400-500

Height (mm) 320 320 320 320 320 320 320

Number of Drawers 1 1 2 2 4 4 4

Basin Options 1 1 1 1 1-2 1-2 1-2

Page 2: HALO II VANITY UNIT€¦ · Number of Drawers 1 1 2 2 3 3 Basin Options 1 1 1 1 1-2 1-2 CUSTOM SIZES 501-600 601-800 801-1100 1101-1300 1301-1600 1601-1800 1801-2000 Width (mm) 501-600

Page 2 of 21

Technical Guide

Halo II Vanity Unit

Dimensions are nominal measurements only.

500mm

600mm

1000mm

1200mm

STANDARD SIZESTOUCH RELEASE DRAWER/S OPENING

SIDE VIEW for all sizes

Page 3: HALO II VANITY UNIT€¦ · Number of Drawers 1 1 2 2 3 3 Basin Options 1 1 1 1 1-2 1-2 CUSTOM SIZES 501-600 601-800 801-1100 1101-1300 1301-1600 1601-1800 1801-2000 Width (mm) 501-600

Page 3 of 21

Technical Guide

Halo II Vanity Unit

Dimensions are nominal measurements only.

1500mm

1800mm

STANDARD SIZESTOUCH RELEASE DRAWER/S OPENING

SIDE VIEW for all sizes

Page 4: HALO II VANITY UNIT€¦ · Number of Drawers 1 1 2 2 3 3 Basin Options 1 1 1 1 1-2 1-2 CUSTOM SIZES 501-600 601-800 801-1100 1101-1300 1301-1600 1601-1800 1801-2000 Width (mm) 501-600

Page 4 of 21

Technical Guide

Halo II Vanity Unit

Dimensions are nominal measurements only.

501-600mm

601-800mm

801-1100mm

1101-1300mm

SIDE VIEW for all sizesINTERNAL VIEW for all sizes

CUSTOM SIZESTOUCH RELEASE DRAWER/S OPENING

Page 5: HALO II VANITY UNIT€¦ · Number of Drawers 1 1 2 2 3 3 Basin Options 1 1 1 1 1-2 1-2 CUSTOM SIZES 501-600 601-800 801-1100 1101-1300 1301-1600 1601-1800 1801-2000 Width (mm) 501-600

Page 5 of 21

Technical Guide

Halo II Vanity Unit

Dimensions are nominal measurements only.

1301-1600mm

1601-1800mm

1801-2000mm

CUSTOM SIZESTOUCH RELEASE DRAWER/S OPENING

SIDE VIEW for all sizes

Page 6: HALO II VANITY UNIT€¦ · Number of Drawers 1 1 2 2 3 3 Basin Options 1 1 1 1 1-2 1-2 CUSTOM SIZES 501-600 601-800 801-1100 1101-1300 1301-1600 1601-1800 1801-2000 Width (mm) 501-600

Page 6 of 21

Technical Guide

Halo II Vanity Unit

Dimensions are nominal measurements only.

500 - 600W: CENTRAL ONLY

1000W: OFFSET LEFT & RIGHT

1200W: OFFSET LEFT & RIGHT

1500W: CENTRAL & DOUBLE BASIN | OFFSET LEFT & RIGHT

STANDARD - RECOMMENDED FOR COUNTER BASINS120DIA CORIAN CUTOUT

Page 7: HALO II VANITY UNIT€¦ · Number of Drawers 1 1 2 2 3 3 Basin Options 1 1 1 1 1-2 1-2 CUSTOM SIZES 501-600 601-800 801-1100 1101-1300 1301-1600 1601-1800 1801-2000 Width (mm) 501-600

Page 7 of 21

Technical Guide

Halo II Vanity Unit

Dimensions are nominal measurements only.

1800W: CENTRAL & DOUBLE BASIN | OFFSET LEFT & RIGHT

STANDARD - RECOMMENDED FOR COUNTER BASINS120DIA CORIAN CUTOUT

Page 8: HALO II VANITY UNIT€¦ · Number of Drawers 1 1 2 2 3 3 Basin Options 1 1 1 1 1-2 1-2 CUSTOM SIZES 501-600 601-800 801-1100 1101-1300 1301-1600 1601-1800 1801-2000 Width (mm) 501-600

Page 8 of 21

Technical Guide

Halo II Vanity Unit

Dimensions are nominal measurements only.

500 - 600W: CENTRAL ONLY

1000W: OFFSET LEFT & RIGHT

1200W: OFFSET LEFT & RIGHT

1500W: CENTRAL & DOUBLE BASIN | OFFSET LEFT & RIGHT

ALTERNATIVE CUTOUT FOR COUNTER BASINS130X200 CORIAN CUTOUT

Page 9: HALO II VANITY UNIT€¦ · Number of Drawers 1 1 2 2 3 3 Basin Options 1 1 1 1 1-2 1-2 CUSTOM SIZES 501-600 601-800 801-1100 1101-1300 1301-1600 1601-1800 1801-2000 Width (mm) 501-600

Page 9 of 21

Technical Guide

Halo II Vanity Unit

Dimensions are nominal measurements only.

1800W: CENTRAL & DOUBLE BASIN | OFFSET LEFT & RIGHT

ALTERNATIVE CUTOUT FOR COUNTER BASINS130X200 CORIAN CUTOUT

Page 10: HALO II VANITY UNIT€¦ · Number of Drawers 1 1 2 2 3 3 Basin Options 1 1 1 1 1-2 1-2 CUSTOM SIZES 501-600 601-800 801-1100 1101-1300 1301-1600 1601-1800 1801-2000 Width (mm) 501-600

Page 10 of 21

Technical Guide

Halo II Vanity Unit

Dimensions are nominal measurements only.

500 - 600W: CENTRAL ONLY

1000W: OFFSET LEFT & RIGHT

1200W: OFFSET LEFT & RIGHT

1500W: CENTRAL & DOUBLE BASIN | OFFSET LEFT & RIGHT

LAUFEN THE NEW CLASSIC 150DIA CORIAN CUTOUT

Page 11: HALO II VANITY UNIT€¦ · Number of Drawers 1 1 2 2 3 3 Basin Options 1 1 1 1 1-2 1-2 CUSTOM SIZES 501-600 601-800 801-1100 1101-1300 1301-1600 1601-1800 1801-2000 Width (mm) 501-600

Page 11 of 21

Technical Guide

Halo II Vanity Unit

Dimensions are nominal measurements only.

1800W: CENTRAL & DOUBLE BASIN | OFFSET LEFT & RIGHT

2000W: DOUBLE BASIN | OFFSET LEFT & RIGHT

LAUFEN THE NEW CLASSIC 150DIA CORIAN CUTOUT

Page 12: HALO II VANITY UNIT€¦ · Number of Drawers 1 1 2 2 3 3 Basin Options 1 1 1 1 1-2 1-2 CUSTOM SIZES 501-600 601-800 801-1100 1101-1300 1301-1600 1601-1800 1801-2000 Width (mm) 501-600

Page 12 of 21

Technical Guide

Halo II Vanity Unit

Dimensions are nominal measurements only.

500 - 600W: CENTRAL ONLY

1000W: OFFSET LEFT & RIGHT

1200W: OFFSET LEFT & RIGHT

1500W: CENTRAL & DOUBLE BASIN | OFFSET LEFT & RIGHT

LAUFEN SONAR120DIA CORIAN CUTOUT

Page 13: HALO II VANITY UNIT€¦ · Number of Drawers 1 1 2 2 3 3 Basin Options 1 1 1 1 1-2 1-2 CUSTOM SIZES 501-600 601-800 801-1100 1101-1300 1301-1600 1601-1800 1801-2000 Width (mm) 501-600

Page 13 of 21

Technical Guide

Halo II Vanity Unit

Dimensions are nominal measurements only.

1800W: CENTRAL & DOUBLE BASIN | OFFSET LEFT & RIGHT

2000W: DOUBLE BASIN | OFFSET LEFT & RIGHT

LAUFEN SONAR120DIA CORIAN CUTOUT

Page 14: HALO II VANITY UNIT€¦ · Number of Drawers 1 1 2 2 3 3 Basin Options 1 1 1 1 1-2 1-2 CUSTOM SIZES 501-600 601-800 801-1100 1101-1300 1301-1600 1601-1800 1801-2000 Width (mm) 501-600

Page 14 of 21

Technical Guide

Halo II Vanity Unit

Dimensions are nominal measurements only.

500 - 600W: CENTRAL ONLY

1000W: OFFSET LEFT & RIGHT

1200W: OFFSET LEFT & RIGHT

1500W: CENTRAL & DOUBLE BASIN | OFFSET LEFT & RIGHT

LAUFEN INO 100DIA CORIAN CUTOUT

Page 15: HALO II VANITY UNIT€¦ · Number of Drawers 1 1 2 2 3 3 Basin Options 1 1 1 1 1-2 1-2 CUSTOM SIZES 501-600 601-800 801-1100 1101-1300 1301-1600 1601-1800 1801-2000 Width (mm) 501-600

Page 15 of 21

Technical Guide

Halo II Vanity Unit

Dimensions are nominal measurements only.

1800W: CENTRAL & DOUBLE BASIN | OFFSET LEFT & RIGHT

2000W: DOUBLE BASIN | OFFSET LEFT & RIGHT

LAUFEN INO 100DIA CORIAN CUTOUT

Page 16: HALO II VANITY UNIT€¦ · Number of Drawers 1 1 2 2 3 3 Basin Options 1 1 1 1 1-2 1-2 CUSTOM SIZES 501-600 601-800 801-1100 1101-1300 1301-1600 1601-1800 1801-2000 Width (mm) 501-600

Page 16 of 21

Technical Guide

Halo II Vanity Unit

Dimensions are nominal measurements only.

500 - 600W: CENTRAL ONLY

1000W: OFFSET LEFT & RIGHT

1200W: OFFSET LEFT & RIGHT

1500W: CENTRAL & DOUBLE BASIN | OFFSET LEFT & RIGHT

ALAPE CIRCA45DIA CORIAN CUTOUT

Page 17: HALO II VANITY UNIT€¦ · Number of Drawers 1 1 2 2 3 3 Basin Options 1 1 1 1 1-2 1-2 CUSTOM SIZES 501-600 601-800 801-1100 1101-1300 1301-1600 1601-1800 1801-2000 Width (mm) 501-600

Page 17 of 21

Technical Guide

Halo II Vanity Unit

Dimensions are nominal measurements only.

1800W: CENTRAL & DOUBLE BASIN | OFFSET LEFT & RIGHT

ALAPE CIRCA45DIA CORIAN CUTOUT

Page 18: HALO II VANITY UNIT€¦ · Number of Drawers 1 1 2 2 3 3 Basin Options 1 1 1 1 1-2 1-2 CUSTOM SIZES 501-600 601-800 801-1100 1101-1300 1301-1600 1601-1800 1801-2000 Width (mm) 501-600

Page 18 of 21

Technical Guide

Halo II Vanity Unit

Dimensions are nominal measurements only.

500 - 600W: CENTRAL ONLY

1000W: CENTRAL | OFFSET LEFT & RIGHT

1200W: CENTRAL | OFFSET LEFT & RIGHT

1500W: CENTRAL & DOUBLE BASIN | OFFSET LEFT & RIGHT

ROCA INSPIRA SOFT SQUARE SEMI-INSET & ROCA INSPIRA ROUND SEMI-INSET340DIA CORIAN CUTOUT

Page 19: HALO II VANITY UNIT€¦ · Number of Drawers 1 1 2 2 3 3 Basin Options 1 1 1 1 1-2 1-2 CUSTOM SIZES 501-600 601-800 801-1100 1101-1300 1301-1600 1601-1800 1801-2000 Width (mm) 501-600

Page 19 of 21

Technical Guide

Halo II Vanity Unit

Dimensions are nominal measurements only.

1800W: CENTRAL & DOUBLE BASIN | OFFSET LEFT & RIGHT

ROCA INSPIRA SOFT SQUARE SEMI-INSET & ROCA INSPIRA ROUND SEMI-INSET340DIA CORIAN CUTOUT

Page 20: HALO II VANITY UNIT€¦ · Number of Drawers 1 1 2 2 3 3 Basin Options 1 1 1 1 1-2 1-2 CUSTOM SIZES 501-600 601-800 801-1100 1101-1300 1301-1600 1601-1800 1801-2000 Width (mm) 501-600

Page 20 of 21

Technical Guide

Halo II Vanity Unit

Dimensions are nominal measurements only.

500 - 600W: CENTRAL ONLY

1000W: OFFSET LEFT & RIGHT

1200W: OFFSET LEFT & RIGHT

1500W: CENTRAL & DOUBLE BASIN | OFFSET LEFT & RIGHT

ROCA INSPIRA SQUARE SEMI-INSET320X320 CORIAN CUTOUT

Page 21: HALO II VANITY UNIT€¦ · Number of Drawers 1 1 2 2 3 3 Basin Options 1 1 1 1 1-2 1-2 CUSTOM SIZES 501-600 601-800 801-1100 1101-1300 1301-1600 1601-1800 1801-2000 Width (mm) 501-600

Page 21 of 21

Technical Guide

Halo II Vanity Unit

Dimensions are nominal measurements only.

1800W: CENTRAL & DOUBLE BASIN | OFFSET LEFT & RIGHT

ROCA INSPIRA SQUARE SEMI-INSET320X320 CORIAN CUTOUT