Embed Size (px)
Citation preview
30 Technology Pkwy S, Suite 400 Norcross, GA [email protected]
PROJECT INFORMATION(PROJECT NAME)
(ARCHITECT)
(CUSTOMER)
(REPRESENTATIVE/ DISTRIBUTOR)
PRINT APPROVED BY:
(SIGNATURE) (DATE)
A SIGNED PRINT APPROVAL SIGNIFIES A CUSTOMER HAS VERIFIED ALL DIMENSIONS, SIZES, QUANTITIES, AND MATERIAL TYPES.
FABRICATION WILL PROCEED ONLY AFTER RECEIPT OFSIGNED PRINT APPROVAL
QUANTITIES______LINEAL FEET@ 10'-0" LTHS ______OUTSIDE MITERS@ 90° ______INSIDE MITERS@ 90°______ENDCAPS: R:_____L:_____ ______SPLICE PLATES ______EXPANSION JOINTS
22GA STEEL 24GA STEEL 26GA STEEL
22GA STAINLESS STEEL 24GA STAINLESS STEEL 26GA STAINLESS STEEL
.032 ALUMINUM
.040 ALUMINUM
.050 ALUMINUM
16OZ COPPER 20OZ COPPER
A B C D
COLOR:_______________________
SIZE:
HALF-ROUND GUTTER+ ACCESSORIES
MATERIAL
2 ½"3"3½"4"4½"5"
5¼"6¼"7¼"8¼"9¼"10¼"
3"3½"4"4½"5"5½"
2½" Radius3" Radius3½" Radius4" Radius4½" Radius5" Radius
5"6"7"8"9"10"
NON-VERTICAL FASCIA-L SUPPORT
VERTICAL FASCIA
HALF ROUND END CAPS
8" MIN.
INTERNAL SPLICE PLATE
D .875"
SPLICE PLATES
1/2"
1/2" Std or ___"
1/2" Std or ___"
2 1/4" Min. is
Std or ___"
CL
CL
B
CA
D.875"
D
GUTTER DETAIL
10'
HALF ROUND GUTTER GUTTER SUPPORT BRACKETS
ROOF MOUNT
ROOF MOUNT NON-VERTICAL FASCIA
NON-VERTICAL FASCIA-V SUPPORT
(limited color availability)
STANDARD BRACKET DETAIL
SUGGESTED SPACING:5" & 6"---48" O.C7" & 8"---36" O.C9" &10"---24" O.C (Internal spacer required)
①
NOTES:
① For a non-standard bracket detail--please circle the correct bracket above and aprint approval will be sent with your quote
MITERED CORNERS
①
②For products/material not listed, please inquire.
②
OUTSIDE
INSIDE
.1875" X 1" STAINLESS GUTTER SUPPORT BRACKET. WRAPPED IN METAL TO MATCH GUTTER
_____VERTICAL FASCIA
_____NON-VERTICAL FASCIA-L SUPPORT
_____NON-VERTICAL FASCIA-V SUPPORT
_____ROOF MOUNT
_____ROOF MOUNT NON-VERTICAL FASCIA
GUTTER SUPPORT BRACKET QUANTITIES:
