GWE64T 11MS

For more information, please contact :

TAN CHONG INDUSTRIAL EQUIPMENT SDN BHD (13285-X)

Lot 3, Jalan Perusahaan Satu, 68100 Batu Caves,Selangor Darul Ehsan, Malaysia.Tel : 03-6189 9832 Fax : 03-6189 9336E-mail : enquiry@tcie.com.my

GWE64T 11MSSpecifications

ENGINEMake and model UD Trucks GH11 390 EC01 Diesel EngineType Euro 3, Vertical in-line 6 cylinder, overhead camshaft,

four valves per cylinder, turbo charger withintercooler, unit injectors controlled

by EMS (Engine Management System)Number of cylinders 6Bore x Stroke 123 mm x 152 mmTotal piston displacement 10,837 ccMax. output 390 HP @ 1,900 rpmMax. torque 187 kg -m @ 1,400 rpmLubrication System Forced feed by gear pumpCooling system Forced feed by centrifugal water pumpFuel system Electronically governed unit injectorAir cleaner Paper element full flow filterElectrical equipment 24-volts system, negative earth- Generator 24-volts 80 ampere alternator

CHASSISClutch Dry single plate, hydraulically operated clutch

release mechanism with air assisted boosterFront axle Drop forged steel “I” section beam reverse

“Elliot” typeRear axle Full-floating, in line tandem type with differential

lock between axles- Final reduction gear Single reduction, hypiod gear (Opt 1 & 2)

Hub reduction, hypiod gear (Opt 3 & 4)Steering Recirculating ball screw type with hydraulic power

assistance adjustable tilt / telescopicService brake Fully pneumatic brake on all wheels, S-cam type(foot brake) with automatic slack adjuster, leading and trailing

shoe with Anti-lock Braking system (ABS)Parking brake Pnuematically controlled spring brake operated by(hand brake) gradual type control valve, acting on all wheelsEmergency brake Spring brake acting on front and rear front axlesFront suspension Parabolic leaf springs with anchor at front and

shackle at rear, telescopic type shock absorberRear suspension Trunnion mounted suspension with multi-leaf springsWidth x Span 75 mm X 1,660 mm

TRANSMISSIONMake and model FAST STO2012Type 12 forward speeds and 2 reverse,

synchromesh on 2nd to 12th gear,constantmesh on 1st and 2nd reverse gear

Gear ratios 1st: 12.10, 2nd: 9.41, 3rd: 7.31,4th: 5.71, 5th: 4.46, 6th: 3.48,

7th: 2.71, Rev1: 11.56, Rev2: 2.59Gear shift Mechnical remote control

WHEELS & TYRES- Tyres 295/80R 22.5 16PR- Rim Pressed steel disc type, 8.25 x 22.5 ISO 10 studs- Spare wheel One spare wheel/tyre with lockable carrier

PERFORMANCEMinimum Turning Radius: 7.45 m1. Maximum Speed and Gradeability @ 60,000kg2. Maximum Speed and Gradeability @ 70,000kg3. & 4. Maximum Speed and Gradeability @ 80,000kg

APPLICATION1. & 2. Longhaul, Distribution Highway3. & 4. Construction, Hilly

Opt Rear Axle Drive - Final ratio Gradeability Transmission Top. Speedtype (tan Ø)% km/h

1. Single reduction 4.11 26.00%

STO2012

119.22. Single reduction 4.63 26.10% 105.93. Hub reduction 4.87 22.60% 100.64. Hub reduction 5.24 24.50% 93.5

10.2

013

FRAMEFrame Rolling form type- Main frame dimensions 300 mm x 90 mm x 8 mm- Inner liner dimensions 277 mm x 80 mm x 7mmFuel tank capacity 405 litres

ELECTRICAL EQUIPMENT- Battery 150 A.h. 12 Volt x 2- Headlights Hologen headlight, 2 lampsOthers Tail lights, stop light, license light,

side clearence light, turn signal light, back-up light, trailer working light, horn

OTHERSItems Standard fitmentFuel coaching system 4Audio system with 2 speakers and antenna 4Auxiliary passenger seat 4Exhaust brake 4UD extra engine brake 4Fog lights 4Air-conditioning system 4Power window 4Sun visors (for driver and co-driver) 4Rearview mirrors 4Under mirror 4Exterior mirrors with electric heater 4Door ventilation 4Air dryer 45th wheel assembly 45th wheel rail and saddle 4Suzzie hose 47 pin connector 4

DIMENSION (mm)Traction Wheelbase (TWB) 4,085 Rear tread (RT) 1,836Overall length (OL) 7,301 Front overhang (FOH) 1,480Overall width (OW) 2,500 Rear overhang (ROH) 2,175Overall height (OH) 3,291 Cab-to-rear axle centre (CA) 3,181Front tread (FT) 2,020 Ground clearance (GC) 261 (Opt1 & 2)

302 (Opt3 & 4)

ATTACHMENTTools UD Trucks standard tools (1 set), 20 ton jack

NOTE: As product improvements may be introduced at any time, specifications are subject to change without notice.

CABINType Cab over engine, forward control with manual

hydraulic tilting, coil spring with shock absorberlnstruments Speedometer with odometer and trip meter- Meters Tachometer, Fuel gauge, Engine coolant temperature

gauge, Air pressure gauge- Warning lights and buzzers Low engine oil pressure indicator

Head light high beam indicatorTurn signal indicator lights

Battery charge warning indicatorHazard warning flasher (4-way)

Parking brake warning lightExhaust brake indicator

Air cleaner clog warning indicator

WEIGHT (kg)Chassis with cab (Approx) 8,871- On front axle 5,176- On rear axles 3,695Permissible gross vehicle weight 31,000Permissible front axle load 7,000Permissible rear axle load 24,000Permissible gross combination weight 60,000 / 70,000 kg