Upload
others
View
3
Download
1
Embed Size (px)
Citation preview
†From delivery. ^Extended Warranty available at extra cost. Conditions apply. Note: The above chart is a brief representation of the chassis specifications within the Isuzu Tipper model range which may change from time to time. For the latest and a detailed understanding of the model and specification variants, please refer to the applicable Isuzu model Specification Sheet.
CHOOSE THE ONE WITH LOADS OF FEATURES
WARRANTIES†
MODEL VEHICLE/ENGINECABIN PERFORATION
CORROSION EXTENDED WARRANTY OPTIONS^
All N Series 3 years or 100,000 kilometres or 2,000 hours 3 years unlimited kilometres 4 years or 200,000
kilometres 5 years or 250,000
kilometres 6 years or 300,000
kilometres
All F Series 3 years or 150,000 kilometres or 2,500 hours 3 years unlimited kilometres 4 years or 250,000
kilometres5 years or 300,000
kilometres6 years or 350,000
kilometres
NLR 200/275 NPR 200/275 NPR 300 NPR 300 NQR 450 FRR 500
SPECIFICATIONS
MODELGVM (kg)
GCM (kg)
ENGINEPOWER
(kW@RPM)TORQUE
(Nm@RPM)TRANSMISSION(GEARS/TYPE)
WHEELBASE (mm)
TIPPER VOLUME
(m3)
NLR 200 4,500 7,000 SiTEC III 150 110 @ 2,800 375 @ 1,600 - 2,800 5 speed manual Short: 2,490 2.0
NLS 200 AWD 4,5006,000 (off-road) 7,000 (on-road)
SiTEC III 150 110 @ 2,800 375 @ 1,600 - 2,800 5 speed manual Short: 2,740 2.0
NLR 275 5,500 8,000 SiTEC III 150 110 @ 2,800 375 @ 1,600 - 2,800 5 speed manual Short: 2,490 2.0
NPR 200 / 275 4,500 / 5,500 8,000 / 9,000 SiTEC III 155 114 @ 2,600 419 @ 1,600 - 2,600 5 speed manual Short: 2,765 2.0
NPR 3006,500 10,000 SiTEC III 155 114 @ 2,600 419 @ 1,600 - 2,600 6 speed manual
Medium: 3,365 3.0
Crew Long: 4,175 2.8
NQR 450 8,700 12,200 SiTEC III 185 139 @ 2,600 510 @ 1,600 - 2,600 6 speed AMT Medium: 3,365 3.6
FRR 500 10,400 16,000 SiTEC III 205 151 @ 2,600 637 @ 1,6006 speed manual Medium: 3,784
3.86 speed AMT Medium: 3,784
TIPPERS
GVM: 4,5OO – 1O,4OOKG GCM: 6,OOO – 1 6,OOOKG
www.isuzu.com.au
TIC: Isuzu is a member of the Truck Industry Council – Safer Greener Essential. Isuzu Australia Limited ABN 97 006 962 572 (“IAL”). The information in this brochure was correct at time of printing, but all measurements, specifications and equipment are subject to change without notice. Some equipment may have been changed and/or is available at extra cost. IAL may make changes at any time without notice, in prices, colours, materials, equipment and models. IAL makes all reasonable attempts to ensure the availability of all vehicles and equipment. The information in this brochure is general in nature. Your Isuzu Truck Dealer can confirm all measurements, specifications and vehicle/equipment availability upon request. Any body illustrated is not standard equipment. APR2011 F•S•A/ISZ6903
*T-Mark Industry Reports. ^On selected models.
THE ONE
Australia’s number one truck company* is proud
to present a range of eight ready-to-work tipper models
from 4,500kg GVM and 2.0 cubic metres load capacity
through to 10,400kg GVM and 3.8 cubic meters.
Based on the class-leading N and F Series there
are eight individual models to select from.
And even though each is specified to match
different applications, they share many common
features including outstanding levels of driver comfort,
class-leading safety features and impressive on-road
performance from the new Isuzu SiTEC Series III engines.
Starting at the business end, the Isuzu ready-to-
work tippers are fully manufactured in Japan.
The all-steel ShinMaywa tipper bodies are match-
specified to the Isuzu cab-chassis and include a
number of sensible and tried-on-the-job features such
as a full 3.2mm all steel deck plate construction, fast
20 second up and 20 second down hydraulic hoist
operation, auto release and 2-way tailgate, shovel
rack and more. Importantly, the Isuzu cab-chassis
and the tipper bodies come together as one in the Isuzu
manufacturing process to ensure that everything from
the hydraulics to the lighting and electronics to the
in-cab operation of the tipper works as it should.
Isuzu’s experience in the tipper market has
resulted in this range of eight models covering the
payload needs of the majority of applications and now
extends to the release of the NLS 200 4x4, an all
wheel drive, narrow cab, 2.0 cubic metre model that’s
perfect for getting on and off sites where limited 2 wheel
drive traction becomes problematic to say the least!
Moving forward these N and F Series, offer bigger
doors, longer handles, and 90° opening. Inside each
cab there’s room to move and comfort is ergonomically
designed. It’s a great way to work.
THE ONE FOR COMFORT AND SAFETY
Sit at the controls of an Isuzu tipper and you’ll see
it’s packed with features – from innovative ideas like
the 13cm colour ‘infotainment system’ to creature
comforts such as drink holders and capacious storage
compartments.
And while it’s a pleasure to drive an Isuzu, it’s also
safer. Anti-lock Braking System (ABS) and Anti-Slip
Regulator/Traction Control (ASR) are standard on all
models. As you’d expect, a driver’s SRS airbag is
standard across the range. NPR and NQR models are
also equipped with a passenger airbag.
THE ONE FOR THE ENVIRONMENT
Isuzu’s SiTEC Series III diesels are economical,
lightweight and compact, providing significantly more
power and torque than before. More importantly, they
are Euro V compliant which means you’ll not only
be delivering a load to your customers but making
a statement regarding the minimal impact your
truck is having on the environment compared to all
the older trucks still around today.
The engines have overhead camshafts with
four valves per cylinder, the latest high-pressure
common rail injection system, Advanced Cooled
Exhaust Gas Recirculation (EGR) systems, a Diesel
Particulate Diffuser (DPD) exhaust and much more.
Which all adds up to more power, improved
economy and lower emissions: easily the best
combination available.
THE ONE FOR SUPPORT
Isuzu Care is the most comprehensive customer
care program ever seen in the Australian truck
market, offering truck buyers and owners a suite of
innovative support services. A good example of
this is the peace of mind offered by Isuzu Assist
(Freecall 1800 947 898), the industry-leading roadside
assistance program that’s standard for all Isuzu trucks
for a period of 3 years from the date of delivery.
Add the in-house Customer Care Centre
(Freecall 1800 035 640) and you can rest assured
that operating an Isuzu is an extremely positive
experience for owners and drivers alike.
1OOOs OF LOADS
1 TIPPER
Two-way opening tailgate with auto release.̂ Two-way opening tailgate with auto release.̂
Auto release body lockdown hook. In cab tipper control.Factory steel ShinMaywa body 20sec raise / 20sec lower time.
Spacious and well-appointed cab interior. NPR 300 Crew Cab pictured.
†From delivery. ^Extended Warranty available at extra cost. Conditions apply. Note: The above chart is a brief representation of the chassis specifications within the Isuzu Tipper model range which may change from time to time. For the latest and a detailed understanding of the model and specification variants, please refer to the applicable Isuzu model Specification Sheet.
CHOOSE THE ONE WITH LOADS OF FEATURES
WARRANTIES†
MODEL VEHICLE/ENGINECABIN PERFORATION
CORROSION EXTENDED WARRANTY OPTIONS^
All N Series 3 years or 100,000 kilometres or 2,000 hours 3 years unlimited kilometres 4 years or 200,000
kilometres 5 years or 250,000
kilometres 6 years or 300,000
kilometres
All F Series 3 years or 150,000 kilometres or 2,500 hours 3 years unlimited kilometres 4 years or 250,000
kilometres5 years or 300,000
kilometres6 years or 350,000
kilometres
NLR 200/275 NPR 200/275 NPR 300 NPR 300 NQR 450 FRR 500
SPECIFICATIONS
MODELGVM (kg)
GCM (kg)
ENGINEPOWER
(kW@RPM)TORQUE
(Nm@RPM)TRANSMISSION(GEARS/TYPE)
WHEELBASE (mm)
TIPPER VOLUME
(m3)
NLR 200 4,500 7,000 SiTEC III 150 110 @ 2,800 375 @ 1,600 - 2,800 5 speed manual Short: 2,490 2.0
NLS 200 AWD 4,5006,000 (off-road) 7,000 (on-road)
SiTEC III 150 110 @ 2,800 375 @ 1,600 - 2,800 5 speed manual Short: 2,740 2.0
NLR 275 5,500 8,000 SiTEC III 150 110 @ 2,800 375 @ 1,600 - 2,800 5 speed manual Short: 2,490 2.0
NPR 200 / 275 4,500 / 5,500 8,000 / 9,000 SiTEC III 155 114 @ 2,600 419 @ 1,600 - 2,600 5 speed manual Short: 2,765 2.0
NPR 3006,500 10,000 SiTEC III 155 114 @ 2,600 419 @ 1,600 - 2,600 6 speed manual
Medium: 3,365 3.0
Crew Long: 4,175 2.8
NQR 450 8,700 12,200 SiTEC III 185 139 @ 2,600 510 @ 1,600 - 2,600 6 speed AMT Medium: 3,365 3.6
FRR 500 10,400 16,000 SiTEC III 205 151 @ 2,600 637 @ 1,6006 speed manual Medium: 3,784
3.86 speed AMT Medium: 3,784
TIPPERS
GVM: 4,5OO – 1O,4OOKG GCM: 6,OOO – 1 6,OOOKG
www.isuzu.com.au
TIC: Isuzu is a member of the Truck Industry Council – Safer Greener Essential. Isuzu Australia Limited ABN 97 006 962 572 (“IAL”). The information in this brochure was correct at time of printing, but all measurements, specifications and equipment are subject to change without notice. Some equipment may have been changed and/or is available at extra cost. IAL may make changes at any time without notice, in prices, colours, materials, equipment and models. IAL makes all reasonable attempts to ensure the availability of all vehicles and equipment. The information in this brochure is general in nature. Your Isuzu Truck Dealer can confirm all measurements, specifications and vehicle/equipment availability upon request. Any body illustrated is not standard equipment. APR2011 F•S•A/ISZ6903
†From delivery. ^Extended Warranty available at extra cost. Conditions apply. Note: The above chart is a brief representation of the chassis specifications within the Isuzu Tipper model range which may change from time to time. For the latest and a detailed understanding of the model and specification variants, please refer to the applicable Isuzu model Specification Sheet.
CHOOSE THE ONE WITH LOADS OF FEATURES
WARRANTIES†
MODEL VEHICLE/ENGINECABIN PERFORATION
CORROSION EXTENDED WARRANTY OPTIONS^
All N Series 3 years or 100,000 kilometres or 2,000 hours 3 years unlimited kilometres 4 years or 200,000
kilometres 5 years or 250,000
kilometres 6 years or 300,000
kilometres
All F Series 3 years or 150,000 kilometres or 2,500 hours 3 years unlimited kilometres 4 years or 250,000
kilometres5 years or 300,000
kilometres6 years or 350,000
kilometres
NLR 200/275 NPR 200/275 NPR 300 NPR 300 NQR 450 FRR 500
SPECIFICATIONS
MODELGVM (kg)
GCM (kg)
ENGINEPOWER
(kW@RPM)TORQUE
(Nm@RPM)TRANSMISSION(GEARS/TYPE)
WHEELBASE (mm)
TIPPER VOLUME
(m3)
NLR 200 4,500 7,000 SiTEC III 150 110 @ 2,800 375 @ 1,600 - 2,800 5 speed manual Short: 2,490 2.0
NLS 200 AWD 4,5006,000 (off-road) 7,000 (on-road)
SiTEC III 150 110 @ 2,800 375 @ 1,600 - 2,800 5 speed manual Short: 2,740 2.0
NLR 275 5,500 8,000 SiTEC III 150 110 @ 2,800 375 @ 1,600 - 2,800 5 speed manual Short: 2,490 2.0
NPR 200 / 275 4,500 / 5,500 8,000 / 9,000 SiTEC III 155 114 @ 2,600 419 @ 1,600 - 2,600 5 speed manual Short: 2,765 2.0
NPR 3006,500 10,000 SiTEC III 155 114 @ 2,600 419 @ 1,600 - 2,600 6 speed manual
Medium: 3,365 3.0
Crew Long: 4,175 2.8
NQR 450 8,700 12,200 SiTEC III 185 139 @ 2,600 510 @ 1,600 - 2,600 6 speed AMT Medium: 3,365 3.6
FRR 500 10,400 16,000 SiTEC III 205 151 @ 2,600 637 @ 1,6006 speed manual Medium: 3,784
3.86 speed AMT Medium: 3,784
TIPPERS
GVM: 4,5OO – 1O,4OOKG GCM: 6,OOO – 1 6,OOOKG
www.isuzu.com.au
TIC: Isuzu is a member of the Truck Industry Council – Safer Greener Essential. Isuzu Australia Limited ABN 97 006 962 572 (“IAL”). The information in this brochure was correct at time of printing, but all measurements, specifications and equipment are subject to change without notice. Some equipment may have been changed and/or is available at extra cost. IAL may make changes at any time without notice, in prices, colours, materials, equipment and models. IAL makes all reasonable attempts to ensure the availability of all vehicles and equipment. The information in this brochure is general in nature. Your Isuzu Truck Dealer can confirm all measurements, specifications and vehicle/equipment availability upon request. Any body illustrated is not standard equipment. APR2011 F•S•A/ISZ6903