1. Cick the viewlog icon on the main screen. It is the 3rd icon from the right

2. Select video/audio log. The viewlog window will appear.

3. Select the camera you wish to view. NOTE: If you want to view multiple cameras,

click the viewmode icon at the top right.

GV-NVR/DVR - Reviewing Video

Viewlog

Select single camera

Select multiple cameras

4. Select time from the video events list. NOTE: If you want to view multiple clips,

select the first clip, hold shift, and push the down arrow while holding shift.

5. Click Play at bottom of the screen and playback will begin.

PLAY

Video event list

1. From the viewlog screen, click the backup icon on the right panel.

The backup screen will appear

2. Select the media that you would like to export to. Select "Using Hard Disk"

if you're exporting to a local drive or usb flash drive. Use "Using CD/DVD"

if you're exporting to a cd or dvd.

GV-NVR/DVR Exporting video

Backup

Using Hard Disk

Using CD/DVD

NOTE: If "Using Hard Disk" click the tab on the right to select a destination

to save the file to.

3. Name the file

4. Add time frame. The "select backup time" screen will appear. Input start date

& time. Input End date & time. Select cameras > click OK

Select file destination

Name file

4. This brings you back to the backup screen. You will notice that your files

were added to the "add time frame" box. Make sure "include player" is checked

5. Click OK. The video will start exporting to the file destination.

Timeframe added