Getting Started Installing StatPlus:mac

1. Open the statplusmac folder in Finder. This folder is usually created under the Downloads

folder when you download StatPlus:mac image.

http://download.analystsoft.com/statplusmacle.zip

If you are using browser different from Safari - please download StatPlus:mac using Safari

browser.

2. Mount the SPM_58**.dmg image with double-click.

3. Drag StatPlus to the Applications folder. If you are asked to confirm replacing any existing

copy - select Yes.

4. Drag StatPlus from the Applications folder to the Dock if you want to see StatPlus icon at

the Dock permanently.

Launching StatPlus:mac

There are three ways to start working with StatPlus:mac.

1. (recommended) Launch your copy of Excel 2004/2008/2011, create or open your

workbook, and make any necessary changes. When ready for analysis, click the

StatPlus:mac icon in your Dock (or double-click the StatPlus:mac icon in your

Applications folder). You should run StatPlus:mac this way if you have more than one

copy of Excel application installed (e.g. you have both Excel 2008 and Excel 2011

installed).

2. Click on the StatPlus:mac icon in your Dock (or double-click the StatPlus:mac icon in

your Applications folder) and run the Spreadsheet>Launch Excel command.

3. [Excel 2004 only] StatPlus:mac submenu is be shown in the Excel main menu.

Running an analysis for sample data

1. Run StatPlus:mac from Applications. All the StatPlus:mac features could can be accessed

from the StatPlus:mac main menu, shown below:

2. Open the "Regression - Polynomial.xls" document from the Examples folder

(Examples folder is located in the statplusmac folder, mentioned above).

3. Click on the StatPlus:mac icon at the Dock, and run the from StatPlus:mac menu the

Statistics>Basic Statistics>Descriptive Statistics command.

Select the variables, i.e. column(s) or range, for each required field using the button.

Please do not enter the range from keyboard.

4. Click the button and StatPlus:mac will activate Excel window. Select the range with

data:

5. And click on the StatPlus:mac icon at the dock to send selected data to StatPlus:mac:

6. You will see selected range in the data entry dialog:

7. Finally - click the OK button. Please do not use Excel until the window with results is

maximized.