Guia APM-30-H

Embed Size (px)

DESCRIPTION

Guia APM-30-H

Citation preview

  • #REF!

    #REF!

    As-built Report of Node B

    Site Name:

    UMTS MILLICOM PROJECT

    Site ID:

  • #REF!

    Sitio: #REF!

    ID: #REF!

    3.0 DATOS DE EQUIPO Y CABLEADO

    3.1 Datos de Equipo

    Modelo de APM: #REF!

    Ubicacin de APM: #REF!

    Ubicacin de BBU: #REF!

    3.2 Fuerza AC de APM a AC Box

    Alimentacin APM: #REF!

    Longitud Cable (m): #REF!

    Calibre Linea (AWG): #REF!

    Calibre Neutro (AWG): #REF!

    Tipo Breaker para APM: #REF!

    Cap. de Breaker APM (A): #REF!

    3.3 Fuerza DC de BBU a APM

    Alimentacin BBU: #REF!

    Longitud Cable (m): #REF!

    Calibre Cable (AWG): #REF!

    Posicin de Breaker en APM: #REF!

    3.4 Fuerza DC de RRU a APM

    Alimentacin RRU: #REF!

    A B C

    Longitud Cable (m): #REF! #REF! #REF!

    Calibre Cable (AWG): #REF! #REF! #REF!

    Posicin de Breaker en APM: #REF! #REF! #REF!

    3.5 Aterrizaje de Gab. APM

    Longitud Cable (m): #REF!

    Calibre Cable (AWG): #REF!

    3.6 Aterrizaje de RRU

    A B C

    Longitud Cable (m): #REF! #REF! #REF!

    Calibre Cable (AWG): #REF! #REF! #REF!

    3.7 Fibra Optica de BBU a RRU

    A B C

    Longitud Cable (m): #REF! #REF! #REF!

    Tipo de Fibra: #REF! #REF! #REF!

    Tipo de Conector de F.O.: #REF!

    3.8 Cableado de TxNumber Label

    Longitud Cable (m): #REF! 1 RX1

    Impedancia (): #REF! 3 RX2

    Tipo de Conector para DDF: #REF! 5 RX3

    No. E1s Rematados: #REF! 7 RX4

    No. E1s Activos: #REF! 2 TX1

    SLPU Instalado? #REF! 4 TX2

    6 TX3

    8 TX34

    #REF!

    Sectores

    Sectores

    Sectores

    Lnea de Neutro Lnea de Fase de AC Terminal para Lnea de Tierra

  • #####

    Sitio: #####

    ID:

    5.0 DIAGRAMA DE INTERCONEXIN DE EQUIPOS

    5.1 Diagrama a Bloques de Nodo B Distribuido con Alimentacin 110 VAC Dual Live

    #REF! #REF!

    APM 30H

  • #####

    Sitio: #####

    ID: #REF! #REF!

    5.2 Diagrama de Configuracin de Equipo

    APM 30H

    RRU3801E

    (A)

    AC

    -48VDC

    Optical cable

    Trunk cable (UL)

    -48VDC

    Optical cable

    -48VDC

    Optical cable

    RRU3801E

    (B)

    RRU3801E

    (C)

  • #REF!

    Sitio: #REF!

    ID: #REF!

    6.0 DIAGRAMA DE EQUIPO BBU

    6.1 Distribucin de Conexiones en BBU

    BBU FULL CONFIGURATION

    6.2 Especificaciones Tcnicas

    Peso (Kg)

    UTRP Board

    This describes the Universal Transmission Processing unit (UTRP) board. It is a

    mandatory board of the BBU3900. A maximum of five UTRPs can be configured

    for one BBU3900.

    WBBPa BoardThis describes the WCDMA Baseband Process unit Type A (WBBPa) board. It is a

    mandatory board of the BBU3900 that processes baseband signals. A maximum of

    six WBBPa boards can be configured for one BBU3900.

    UBFA Module

    This describes the Universal BBU Fan unit Type A (UBFA) module. It is the

    mandatory module of the BBU3900 that controls the fan speed and detects the

    temperature of the fan board.

    UEIU Board

    This describes the Universal Environment Interface Unit (UEIU) board. It is an

    optional board of the BBU3900 that transmits monitoring signals and alarm signals

    from external devices to the WMPT.

    UPEU Board

    This describes the Universal Power and Environment Interface Unit (UPEU) board.

    It is a mandatory board of the BBU3900 that converts the DC power from -48 V or

    +24 V to +12 V.

    86 x 442 x 310 (HxWxD)

    para Rack 19" 5 -48VDC 60 -5 a +55 C

    WMPT Board

    This describes the WCDMA Main Processing & Transmission unit (WMPT)

    board. It is a mandatory board of the BBU3900. A maximum of two WMPTs can

    be configured to implement backup.

    Dimensiones (mm) Alimentacin Comsumo Mximo (W) Rango de Temperatura

    #REF!

  • #REF!

    Sitio: #REF!

    ID: #REF!

    7.0 DIAGRAMA DE EQUIPO APM

    7.1 Distribucin de Elementos en APM 30 H

    7.2 Especificaciones Tcnicas de APM 30H

    Dimensiones (mm)

    Peso (Kg)

    Rango Voltaje Entrada

    Voltaje de Entrada Tpica

    Freq. Voltaje de Entrada

    Consumo Total para -48V

    Mx. Corriente Entrada

    Rango Voltaje Salida

    Temperatura Operacin

    Humedad Relativa

    40 C a + 45 C

    5% a 100%

    1500 W

    32A

    58 VDC a 44 VDC

    #REF!

    600x700x1600

    161 (full config.)

    90 VAC a 290 VAC

    220 VAC a 240 VAC

    40 Hz a 65 Hz

    APM 30

    GABINETE DE

    BATERIAS

    Banco de Bateras 2

    Banco de Bateras 1

  • #REF!

    Sitio: #REF!

    ID: #REF! #REF!

    7.3 Especificaciones Tcnicas de Bateras

    Marca Dengata

    Modelo 6-GFMF-100A

    Voltaje Normal 12 V

    Capacidad 100 Ah

    Dimensiones (LxWxH) 520x107x263 mm (ajustable a Rack de 19" y 23")

    Peso 38.5 Kg

    Tiempo de Respaldo 6.0 Hr

    Resistencia Interna 6.60 m

    Corriente de Cortocircuito 1870 A

    Rango Temperatura ptima 20 C ~ 25 C

    Rango Temperatura Permisible -15 C ~ 50 C

    Vida til 10 aos a 25 C

    Densidad de Energa Volumtrica 80~98 Wh/l

    Densidad de Energa Gravimtrica 30~35 Wh/kg

    107

    26

    520

  • Sitio: #REF!

    ID: #REF!

    8.0 DIAGRAMA DE EQUIPO RRU

    8.1 Distribucin de Conexiones en RRU

    Rango de Temperatura -33 a 50 C

    Humedad Relativa de

    Ambiente5%100% RH

    Alimentacin -48 VDC

    Potencia Salida (W) 40

    Consumo (W) 240

    #REF!

    #REF!

    8.2 Especificaciones Tcnicas

    Dimensiones (mm) 485 x 285 x 170 (H

    x W x D)

    Peso 20 Kg

    Optical Fibre

    TX/RX TX/RX

    Power Cable

    Cable PGND

  • #REF!

    Sitio: #REF!

    ID: #REF!

    9.0 DATOS DE ANTENA

    9.1 Especificaciones y Accesorios de Antena

    #REF!

  • #####

    Sitio: #####

    ID: #####

    10.0 DIAGRAMA DE CABLEADO DE NODO B DISTRIBUIDO

    10.1 Diagrama de Interconexin

    Antena:

    RRU RRU RRU

    Fibra Optica Fuerza Fibra Optica Fuerza Fibra Optica Fuerza

    1 TX/RXA

    2 RXB

    3 TX/RXA

    BBU 4 RXB5 CPRI_W

    6 PWR

    7 CPRI0, CPR1 y CPRI2 DE BBU

    8 CONEXIN A APM

    #REF!

    #REF! #REF! #REF!

    Cable de RF Cable de RF Cable de RF

    Sector A Sector B Sector C

    5

    3 4

    1 2

    6

    7 8

    5

    3 4

    1 2

    6

    7 8

    5

    3 4

    1 2

    6

    7 8

    7

  • ####

    Sitio: ####

    ID:

    11.0 DIAGRAMA DE CABLEADO DE RF

    11.1 Diagrama de Interconexin

    Jumper 1/2"

    #### #### ####

    Feeder 7/8"

    #### #### ####

    Fibra Optica

    #### #### ####

    1 Conector 7/16 Din Hembra

    2 Conector 7/16 Din Macho3 Conector Duplex CPRI_W4 Conector Duplex LC/PC

    #REF! #REF!

    BBU CPRI0 BBU CPRI1 BBU CPRI2

    Antena Sector A Sector B

    RRU

    BBU

    3

    4

    4

    3

    1

    2

    2

    1

    3

    4

    4

    3

    1

    2

    3

    4

    4

    3

    1

    2

    Sector C

    3

    4

    4

    3

    1

    2

    2 1

    RRU RRU RRU

    2 1

    2 1