24
GTC-700EX 70t Telescopic Boom Crawler Crane GENERAL DATA CRANE CAPACITY 70t at 3.0m BOOM 4-section, 11.4 m – 34.0 m DIMENSION Overall Length 14.49 m Overall Width (tracks extended) 5.72 m Overall Width (tracks retracted) 3.81 m Overall Width (tracks removed) 3.0 m Overall Height 3.22 m MASS Gross Vehicle Mass (Standard Equipment Package) 61,937 kg PERFORMANCE Travel Speed 1.0 km/h – 2.8 km/h Gradability 68% CRANE SPECIFICATION MODEL GTC-700EX CAPACITY 70t at 3.0m BOOM 4-section full power synchronized telescoping boom. Synchronized telescoping system consists of two double acting hydraulic cylinders with load holding valves and extension and retraction cables. • Retracted Length: 11.4 m • Extended Length: 34.0 m • Extension Time: 102 s • Elevating Angles: -1° to 78° • Elevating Time: 64 s • Boom Head: Seven, 483 mm diameter cast nylon sheaves on heavy-duty roller bearings AUXILIARY BOOM HEAD Quick reeve, single 483 mm diameter high-strength, cast nylon sheave mounted on a heavy-duty roller bearing. HOOK BLOCKS • Hook Block: 70t hook block - Five 483 mm diameter sheaves mounted on heavy duty roller bearings with swivel hook and safety latch. • Headache Ball: 11t ball includes a swivel hook with a safety latch. WINCHES Planetary geared two-speed winch includes a bent axis hydraulic motor, multi-disc internal brake, counterbalance valve, grooved drum and cable follower. Drum rotation indicator is included (complete winch performance specs on Page 3) • Main Winch - Rope Diameter and Length: 19mm x 182m - Single line pull: 78.2 kN (first layer) - Single line speed: 68.6 m/min (at the 4th layer) • Auxiliary Winch - Rope Diameter and Length: 19mm x 107m - Single line pull: 78.2 kN (first layer) - Single line speed: 68.6 m/min (at the 4th layer) TRAVEL Each side frame contains a pilot controlled, two-speed track drive with hydraulic axial piston motor and parking brake. Travel system provides skid steering and counter rotation. • Low travel speed: 1.0 km/h • High travel speed : 2.8 km/h • Gradeability (unladen): 68% COUNTERWEIGHT Total 16,270 kg rear counterweight SWING Gear motor driving a planetary gear reducer with a shaft mounted pinion, external gear shear ball slew bearing bolted to the superstructure and the carbody allows the superstructure to rotate 360°. Dual model swing, free/lock selectable. • Swing Speed: 0 - 2.2 rpm • Swing Parking Brake: Spring applied failsafe brake with hydraulic release that is controlled from the operators cab • Swing Service Brake: Hydraulically applied, controlled through foot actuated pedal • House Lock System: 2-position, manually pinned LOAD MOMENT INDICATOR TADANO AML-C Rated Capacity Limiter and Anti-Two Block system • Control function shutdown. Audible and visual warnings • LCD screen provides a continuous display of working boom length, boom angle, working load radius, tip height, parts-of-line (operator set), machine track configuration (operator set), relative load moment, maximum permissible load and actual load. • Anti-two block weight allows quick reeving of hook blocks. • Optional 3-color light bar for external indication of load state. FRAME The frame is an all-steel, welded structure, precision machined to accept attachment of the boom and swing components. SPECIFICATION SHEET NO. 491-11/13 AS

GTC-700EX - Tadano Mantis Cranes · gtc-700ex 70t telesoi boo craler crane specification sheet no. 491-11/13 as please read, understand, and follow the manuals furnished with the

  • Upload
    others

  • View
    13

  • Download
    0

Embed Size (px)

Citation preview

Page 1: GTC-700EX - Tadano Mantis Cranes · gtc-700ex 70t telesoi boo craler crane specification sheet no. 491-11/13 as please read, understand, and follow the manuals furnished with the

GTC-700EX70t Telescopic Boom Crawler Crane

GENERAL DATACRANE CAPACITY 70t at 3.0mBOOM 4-section,

11.4 m – 34.0 mDIMENSIONOverall Length 14.49 mOverall Width (tracks extended) 5.72 mOverall Width (tracks retracted) 3.81 mOverall Width (tracks removed) 3.0 mOverall Height 3.22 mMASSGross Vehicle Mass (Standard Equipment Package)

61,937 kg

PERFORMANCETravel Speed 1.0 km/h –

2.8 km/hGradability 68%

CRANE SPECIFICATIONMODELGTC-700EX

CAPACITY70t at 3.0m

BOOM 4-section full power synchronized telescoping boom. Synchronized telescoping system consists of two double acting hydraulic cylinders with load holding valves and extension and retraction cables. • Retracted Length: 11.4 m • Extended Length: 34.0 m • Extension Time: 102 s • Elevating Angles: -1° to 78° • Elevating Time: 64 s • Boom Head: Seven, 483 mm diameter cast nylon

sheaves on heavy-duty roller bearings

AUXILIARY BOOM HEADQuick reeve, single 483 mm diameter high-strength, cast nylon sheave mounted on a heavy-duty roller bearing.

HOOK BLOCKS • Hook Block: 70t hook block - Five 483 mm diameter

sheaves mounted on heavy duty roller bearings with swivel hook and safety latch.

• Headache Ball: 11t ball includes a swivel hook with a safety latch.

WINCHESPlanetary geared two-speed winch includes a bent axis hydraulic motor, multi-disc internal brake, counterbalance valve, grooved drum and cable follower. Drum rotation indicator is included (complete winch performance specs on Page 3) • Main Winch - Rope Diameter and Length: 19mm x 182m -Singlelinepull:78.2kN(firstlayer) - Single line speed: 68.6 m/min (at the 4th layer) • Auxiliary Winch - Rope Diameter and Length: 19mm x 107m -Singlelinepull:78.2kN(firstlayer) - Single line speed: 68.6 m/min (at the 4th layer)

TRAVEL Each side frame contains a pilot controlled, two-speed track drive with hydraulic axial piston motor and parking brake. Travel system provides skid steering and counter rotation. • Low travel speed: 1.0 km/h • High travel speed : 2.8 km/h • Gradeability (unladen): 68%

COUNTERWEIGHT Total 16,270 kg rear counterweight

SWINGGear motor driving a planetary gear reducer with a shaft mounted pinion, external gear shear ball slew bearing bolted to the superstructure and the carbody allows the superstructure to rotate 360°. Dual model swing, free/lock selectable. • Swing Speed: 0 - 2.2 rpm • Swing Parking Brake: Spring applied failsafe brake with

hydraulic release that is controlled from the operators cab • Swing Service Brake: Hydraulically applied, controlled

through foot actuated pedal • House Lock System: 2-position, manually pinned

LOAD MOMENT INDICATORTADANO AML-C Rated Capacity Limiter and Anti-Two Block system • Control function shutdown. Audible and visual warnings • LCD screen provides a continuous display of working

boom length, boom angle, working load radius, tip height, parts-of-line (operator set), machine track configuration(operatorset),relativeloadmoment,maximum permissible load and actual load.

• Anti-two block weight allows quick reeving of hook blocks.

• Optional 3-color light bar for external indication of load state.

FRAMEThe frame is an all-steel, welded structure, precision machined to accept attachment of the boom and swing components.

SPECIFICATION SHEET NO. 491-11/13 AS

Page 2: GTC-700EX - Tadano Mantis Cranes · gtc-700ex 70t telesoi boo craler crane specification sheet no. 491-11/13 as please read, understand, and follow the manuals furnished with the

2

GTC-700EX 70t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. 491-11/13 AS

OPERATORS CABFully-enclosed, air conditioned all-steel modular cab with lockableswingingdoor,acousticallining,anti-slipfloorandtinted safety glass. • Cab tilts 20°. • Rear view cameras are appropriately located as are

three remote control work lights. • Vent window in the rear of the cab. • Grab bars and steps are located for easy access to the

cab. • Defroster, heater, circulating fan • 2-speed windshield wiper, top glass wiper • Six-way adjustable fabric seat with headrest, seat belt • Dome light •Dry-chemicalfireextinguisher • Four-way electronic armrest mounted joysticks control

swing, boom extend, main winch, auxiliary winch and boom hoist. Electronic foot pedals control the travel and swing service brake functions.

• Selectable control modes for: Fine Control, Auger, and hand control of travel functions.

• Seat and armrest termination switches immediately disable all hydraulic functions as the operator rises from the seat or lifts the left hand armrest.

Dash instrumentation: tachometer, voltmeter, oil pressure gauge, temperature gauge, hour meter and fuel gauge. Indicators are provided for crane level, load moment, drum rotation,airfilterrestriction,hydraulicoiltemperatureandfilterrestriction,engineoilpressureandtemperature.

ENGINE • Make/ Model: Cummins QSB 6.7 • Type: 6 Cylinder, Water cooled, 4 Cycle • Aspiration: Turbocharged and Aftercooled • Max.Output: 194 kW (260 hp) @ 2200 RPM • Max Torque: 987 Nm (728 Lb-ft) @ 1500 RPM • Piston Disp: 6.7 liter • Bore x Stroke: 107mm x 124mm • Emission Cert: U.S. EPA Tier 3, Euromot Stage IIIA • Alternator: 130 amp

ELECTRICAL SYSTEM12 VDC

FUEL SYSTEM • Capacity: 416 liter • Filtration: Inline fuel/water separator and engine

mountedfuelfilter

HYDRAULIC SYSTEM • Hydraulic Pumps: Two high pressure, variable axial

piston pumps with load sense and power limiting control for crane functions. One variable axial piston pump for cooling loop.

•DirectionalValves:Multiplepressureandflowcompensated valves with integrated relief valves

• Pump output: 583 liter/min @ 2100 RPM engine speed. 330 bar maximum pressure

HYDRAULIC SYSTEM (continued) •Reservoir1,136litercapacity,spin-onfiller/breather,

sight gauge, cleanout, and sump drain. •Filtration:5micron,fullflowtankmountedreturnfilters

with electrical clogging indicator. 5 micron pilot oil in-line pressurefilterwithelectricalcloggingindicator.

• Diagnostic ports provided for system, load sense, and pilot pressure

SIDE FRAMESTwo welded steel side frames are paired with a track group. The side frames extend and retract hydraulically and are controlled from the cab. • Track Rollers: Two top and twelve bottom sealed rollers

oneachtrackframeIdler:Oilfilled,selflubricatingwithspring type tensioner

• Track Shoes: 900mm, 3-bar semi grouser

OPTIONAL EQUIPMENT • Boom Extension: Lattice type, swing away - Length: 9,1m - Head: Two, 483 mm diameter cast nylon sheaves on

heavy-duty roller bearings - Max. Lifting Height: 43,3m • Boom Jib: Lattice type, swing away, stores along boom

extension - Length: 6,1m - Offset Angles: 15° & 30° - Max. Lifting Height: 49,4m • Three Section Boom: Hydraulically proportional full

power boom: - Retracted Length: 7,9m - Extended Length: 16,4 - Maximum Tip Height: 17,3m • 45t hook block - Three 457 mm steel sheaves, swivel

hook & safety latch • Carbody Jack System: Hydraulic cylinder jack system

and pendant control to facilitate quick removal of track frames for 3 m shipping width.

• Track Shoes: 760 mm 3-bar semi grouser • Auger Ready Package: Includes hoses, fasteners and

stowage bracket assembly mounted to the base section oftheboomwithaflowcapabilityof130liter/min

• Complete Auger Package: Adds a two speed auger motor/gear box and one 1,52m kelly bar to the Auger Ready Package.

• Tool Circuit: Provides 23 liter/min and 45 liter/min at 176 bar through a 15,24m twin hose reel with quick disconnectfittingstooperateopencentertools.

• Free Fall Hoists: All winches are available in controlled freefallconfigurations.

• Cold Weather Packages: Cold weather options are available for operation to -40°C (Consult factory for application support)

• 3 Color light bar for external load indication. •Cliponflattrackshoes

Specifications are subject to change without prior notice.

Page 3: GTC-700EX - Tadano Mantis Cranes · gtc-700ex 70t telesoi boo craler crane specification sheet no. 491-11/13 as please read, understand, and follow the manuals furnished with the

3

GTC-700EX 70t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. 491-11/13 AS

AUXILIARY WINCHPlanetary geared two-speed winch includes a bent axis, variable displacement hydraulic motor and a multi-disc internal brake.

Wire Rope: 107 m 19 mm FLEX-X 35 Rotation Resistant Line pulls are not based on wire rope strength. Drum rotation indicator is standard.

Rope Layer Maximum Line Pull Full Load Line Speed Layer Total

1 78,2 kN 52 m/min 29 m 29 m2 70,5 kN 57 m/min 31 m 60 m3 64,2 kN 63 m/min 35 m 95 m4 58,9 kN 69 m/min 38 m 133 m5 54,5 kN 74 m/min 42 m 175 m

MACHINE WEIGHTSSTANDARD CRANE WITH 4 SECTION 34 m BOOM, 2 PIECE COUNTERWEIGHT & 900 mm TRACK SHOES 60,411 kgCrane Less Counterweights and Track Frames 27,810 kgCounterweight, 2 pieces (Lower - 8,350 kg; Upper - 7,920 kg) 16,270 kgTrack Frames, 2 pieces 8,165 kg each 16,330 kgAuxiliary Winch with Standard Rope 436 kgAuxiliary Nose Sheave 95 kg11t Headache Ball 200 kg70t Hook Block 795 kg

OPTIONAL EQUIPMENTAlternative Boom 16,5 m three section boom in place of standard boom** 3,760 kg9,1 m Lattice Extension 771 kg6,1 m Jib (connects to head of Lattice Extension ONLY) 318 kgAuger Ready Package 200 kgComplete Auger Package 690 kg1,5m Auger Kelly Bar 54 kg1,8 m Auger Kelly Bar 64 kg45t Hook Block 498 kgCarbody Jacks 769 kg

* Deduction from Standard Crane Weight

MAIN WINCHPlanetary geared two-speed winch includes a bent axis, variable displacement hydraulic motor and a multi-disc internal brake.

Wire Rope: 182 m, 19 mm - FLEX-X 35 Rotation Resistant Line pulls are not based on wire rope strength. Drum rotation indicator is standard.indicator is standard.

Rope Layer Maximum Line Pull Full Load Line Speed Layer Total

1 78,2 kN 52 m/min 29 m 29 m2 70,5 kN 57 m/min 31 m 60 m3 64,2 kN 63 m/min 35 m 95 m4 58,9 kN 69 m/min 38 m 133 m5 54,5 kN 74 m/min 42 m 175 m

Specifications are subject to change without prior notice.

Page 4: GTC-700EX - Tadano Mantis Cranes · gtc-700ex 70t telesoi boo craler crane specification sheet no. 491-11/13 as please read, understand, and follow the manuals furnished with the

4

GTC-700EX 70t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. 491-11/13 AS

14.69

3.13

3

0.67

2.69

2.92

2.78

Next Assembly

Mat'l - Type

Next Assembly Drawn By Date

Mat'l - Qty

Weight Scale

Drawing NumberDate

Date

Checked By

Approved By

SheetRev.

Drawing Description

MANTIS 1705 Columbia Ave.

Suite 200Franklin TN, 37064, USA Phone 615-794-4556

THIS PRINT AND THE INFORMATION CONTAINED HEREIN ARE THE PROPERTY OF TADANO MANTIS CORPORATION, AND ARE FURNISHED TO THE HOLDER IN CONFIDENCE, AND ARE NOT TO BE REPRODUCED, USED OR DISCLOSED TO OTHERS WITHOUT THE EXPRESS PERMISSION OF TADANO MANTIS CORPORATION.

N/A

N/A

84391.70# 1:24.

D-gtc700ex transport1/18/2010 1 of 1

FINAL ASSEMBLY, GTC700-EX

TOLERANCES UNLESS NOTED Base Features Machined Features.X ........... 0.13 .XX ......... 0.030.XX ........ 0.060 .XXX ....... 0.005.XXX ..... 0.030 ANGLES ..... 1 Fractional Holes 1/64 ALL DIMENSIONS IN INCHES

0. RBull

Next Assembly

Next Assembly.

.

2.78

2.69

3.0

2.92

0.67

DIMENSIONS

TRANSPORT DIMENSIONS

Superstructure Transport Weight:29,015 kg(Standard crane with 4 section 34 m boom, Aux winch with wire rope, carbody jacks)

Page 5: GTC-700EX - Tadano Mantis Cranes · gtc-700ex 70t telesoi boo craler crane specification sheet no. 491-11/13 as please read, understand, and follow the manuals furnished with the

5

GTC-700EX 70t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. 491-11/13 AS

TRANSPORT DIMENSIONS

Track Frames:2 Pieces: 8,165 kg each

Upper Counterweight:1 Piece: 7,920 kg

Lower Counterweight1 Piece: 8,350 kg

Page 6: GTC-700EX - Tadano Mantis Cranes · gtc-700ex 70t telesoi boo craler crane specification sheet no. 491-11/13 as please read, understand, and follow the manuals furnished with the

6

GTC-700EX 70t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. 491-11/13 AS

1.5 m1.5 m1.5 m1.5 m

34M MAIN BOOM, 9.1M EXTENSION & 6.1M JIB

Page 7: GTC-700EX - Tadano Mantis Cranes · gtc-700ex 70t telesoi boo craler crane specification sheet no. 491-11/13 as please read, understand, and follow the manuals furnished with the

7

GTC-700EX 70t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. 491-11/13 AS

PLEASE READ, UNDERSTAND, AND FOLLOW THE MANUALS FURNISHED WITH THE CRANE (OPERATOR’S AND SAFETY) AS WELL AS THE CAPACITY LIMITATIONS AND GENERAL CONDITIONS LISTED BELOW PRIOR TO

OPERATION OF THE CRANE. FAILURE TO DO SO MAY RESULT IN AN ACCIDENT.

GTC-700EXWIRE ROPE LINE PULL CAPACITIES

PARTS OF

LINE

MAIN WINCH

(kN)

AUX WINCH

(kN)

PARTS OF

LINE

MAIN WINCH

(kN)1 75,2 75,2 6 434,72 149,2 149,2 7 503,4

3 222,2 N/A 8 571,2

4 294,1 N/A 9 637,9

5 364,9 N/A 10 703,7

19mm diameter wire rope, Flex-X 35 Rotation Resistant

Capacity Limitations and General Conditions:1. This MANTIS CRANE as manufactured by Tadano Mantis

Corporation meets the requirements of AS1418.5-2002. Structure and stability have been tested in accordance with this standard.Modifications to the crane or use of optionalequipmentotherthanspecifiedbythemanufacturercanre-sult in a reduction of capacity.

2. All lifting capacities are determined by boom length and load radius.

3. Rated capacity loads given are maximum covered by the manufacturer’s warranty and are based on a freely suspend-ed load with NO allowance for factors such as out-of-level op-eration(beyondthelimitsspecifiedonthecharts),supportingsurface conditions, hazardous surroundings, experience of personnel, etc. The operator shall establish practical working loads based on prevailing operating conditions, such as, but not limited to the above.

4. All rated capacity loads shown apply to original equipment as supplied by Tadano Mantis Corporation. Lifting capacities for the main boom apply to a crane with no boom extensions or accessories mounted on the crane.

5. Lifting capacities in the structural area are based on AS 1418.5-2002.

6. Lifting capacities in the stability area are based on AS 1418.5-2002.

7. Maximum permissible wind speed for operation is 36 km/hr.8. Boom positions without rated loads in the charts are prohib-

ited. These areas are indicated by an “*” and are susceptible to instability either in the forward direction or the backwards direction. Even without a load, the boom should not be po-sitionedinthesespecificconfigurationsoftheloadcharttoavoid tipping the crane.

9. Deductions from rated capacities must be made for the weight of the hook block, headache ball, slings, spreader bar, and any other suspended equipment. See Lifting Capacity De-duction Chart for load handling devices supplied by Tadano Mantis Corporation

10. It is permissible to attempt to telescope boom with a load within the limits of rated capacities. However, boom tele-scope system hydraulic pressure, and/or boom lubrication may affect operation.

11. Side pull on boom is extremely dangerous and must be avoided.

12. DO NOTexceedmanufacturersmaximumspecifiedreeving.13. DO NOTliftloadorextendboomwithoutproperconfigura-

tion of crane per load chart selected.14. Lifting capacities are subject to change without notice.15. The above remarks are for information only. Always

consult the operator’s manual before operating this crane.

Load moment indicating and anti-two block systems are operator aids and must never be used in lieu of job site lift planning calculations by the operator which must take into account ground conditions, weather and all other environmental factors prevailing at the time of the lift.Pricesandspecificationsaresubjecttochangeatanytimewithoutpriornoticeandareforfactoryinstallationatthetimeoforiginalmanufacture. F.O.B Plant; Richlands, VA 24641. Illustrations and photographs may show optional equipment. Supercedes all previous issues. Please see www.mantiscranes.com for most current information.

Page 8: GTC-700EX - Tadano Mantis Cranes · gtc-700ex 70t telesoi boo craler crane specification sheet no. 491-11/13 as please read, understand, and follow the manuals furnished with the

8

GTC-700EX 70t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. 491-11/13 AS

LOAD CHARTS LIFTING CAPACITIES - LOADS IN METRIC TONMANTIS Model GTC-700EX LOAD CHART 34.0m BOOM

TMC# 138731 - 11 - Rev 0 063011

LOAD CHARTSCHART #1

NO TRAVEL – LEVEL 0°TO 1°MAIN BOOM with TRACKS FULLY EXTENDED

15.9t COUNTERWEIGHT MAIN BOOM LENGTH (m)

11.4 13.8 16.2 18.6 22.5 26.3 30.2 34.0 RADIUS (m)

s ° s ° s ° s ° s ° s ° s ° s ° RADIUS

(m)

3.0 70.4 70.0 73.9 48.8 76.4 47.6 3.0

3.5 67.6 64.0 71.7 47.6 74.5 45.9 76.6 42.3 3.5

4.0 64.9 58.1 69.5 46.8 72.7 44.3 75.0 39.5 77.6 29.5 4.0

4.5 62.0 52.5 67.3 46.3 70.8 42.9 73.4 37.5 76.3 29.3 4.5

5.0 59.1 47.6 65.0 43.6 68.9 40.7 71.8 35.4 75.0 28.6 77.2 23.4 5.0

6.0 52.9 38.0 60.2 37.3 65.0 36.3 68.5 31.2 72.3 26.9 75.0 23.1 76.9 20.9 6.0

7.0 46.1 31.3 55.2 31.1 61.0 30.6 65.1 28.4 69.6 24.3 72.7 20.7 75.0 18.8 76.7 16.3 7.0

8.0 38.3 25.0 49.9 24.9 56.8 24.7 61.6 24.5 66.8 22.2 70.4 18.5 73.0 16.9 75.0 15.8 8.0

9.0 28.7 20.6 44.1 20.5 52.4 20.3 58.0 20.2 64.0 20.6 68.0 16.9 71.0 15.3 73.2 14.3 9.0

10.0 13.2 17.3 37.5 17.3 47.7 17.1 54.2 17.0 61.1 17.5 65.7 16.1 68.9 14.0 71.4 13.0 10.0

11.0 29.7 14.8 42.6 14.6 50.3 14.5 58.1 15.0 63.2 15.2 66.9 12.8 69.6 11.7 11.0

12.0 18.9 12.8 37.0 12.7 46.1 12.6 55.0 13.0 60.7 13.3 64.8 11.8 67.8 10.6 12.0

13.0 30.3 11.1 41.6 11.0 51.8 11.4 58.2 11.7 62.7 11.2 66.0 10.2 13.0

14.0 21.9 9.8 36.5 9.6 48.4 10.1 55.6 10.4 60.5 10.6 64.1 9.7 14.0

15.0 4.6 8.6 30.8 8.5 44.9 9.0 52.9 9.2 58.3 9.5 62.2 9.1 15.0

16.0 23.8 7.6 41.1 8.1 50.0 8.3 56.0 8.5 60.3 8.5 16.0

17.0 13.6 6.8 36.9 7.2 47.1 7.5 53.6 7.7 58.3 7.7 17.0

18.0 32.3 6.5 44.0 6.7 51.2 7.0 56.3 7.0 18.0

19.0 27.0 5.9 40.7 6.1 48.7 6.3 54.2 6.4 19.0

20.0 20.4 5.3 37.2 5.5 46.1 5.8 52.1 5.8 20.0

21.0 9.9 4.8 33.3 5.0 43.3 5.3 49.9 5.3 21.0

22.0 29.0 4.5 40.5 4.8 47.6 4.8 22.0

23.0 24.0 4.1 37.4 4.4 45.3 4.4 23.0

24.0 17.6 3.7 34.1 4.0 42.8 4.0 24.0

25.0 6.2 3.3 30.4 3.6 40.3 3.7 25.0

26.0 26.3 3.3 37.5 3.3 26.0

27.0 21.5 3.0 34.6 3.0 27.0

28.0 15.2 2.7 31.5 2.7 28.0

29.0 28.0 2.5 29.0

30.0 24.1 2.2 30.0

31.0 19.4 2.0 31.0

32.0 13.1 1.8 32.0

Parts of Line

10 8 7 6 5 4 4 3 Parts of Line

Telescoping Sequence (%) I 0% 33% 67% 100% 100% 100% 100% 100% III 0% 0% 0% 0% 25% 50% 75% 100% IIIII 0% 0% 0% 0% 25% 50% 75% 100% III

Notes:1. Capacities appearing above the bold line are based on structural strength. Capacities appearing below the bold line are based on stability and do not exceed 75% of tipping. 2. During operation the wind speed must not exceed 36 km/hr. 3. An * on the chart indicates positions without rated loads. These areas are susceptible to instability either in the forward direction or the backwards direction. Even without a load, the boom should not be positioned in these specific configurations ofthe load chart to avoid tipping. Warning: All stowed load handling devices are considered loads. See deduction chart for values.

16.3t COUNTERWEIGHT

Page 9: GTC-700EX - Tadano Mantis Cranes · gtc-700ex 70t telesoi boo craler crane specification sheet no. 491-11/13 as please read, understand, and follow the manuals furnished with the

9

GTC-700EX 70t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. 491-11/13 AS

LOAD CHARTS LIFTING CAPACITIES - LOADS IN METRIC TONMANTIS Model GTC-700EX LOAD CHART 34.0m BOOM

TMC# 138731 - 14 - Rev 0 063011

CHART #4 NO TRAVEL – LEVEL 3°TO 4°

MAIN BOOM with TRACKS FULLY EXTENDED 15.9t COUNTERWEIGHT

MAIN BOOM LENGTH (m)

11.4 13.8 16.2 18.6 22.5 26.3 30.2 34.0 RADIUS (m)

s ° s ° s ° s ° s ° s ° s ° s ° RADIUS

(m)

3.0 70.4 52.5 73.9 36.6 76.4 35.2 3.0

3.5 67.6 48.0 71.7 35.7 74.5 34.0 76.6 30.9 3.5

4.0 64.9 43.6 69.5 35.1 72.7 32.8 75.0 28.8 77.6 21.2 4.0

4.5 62.0 39.4 67.3 34.8 70.8 31.7 73.4 27.4 76.3 21.1 4.5

5.0 59.1 35.7 65.0 32.7 68.9 30.1 71.8 25.9 75.0 20.6 77.2 16.6 5.0

6.0 52.9 28.5 60.2 28.0 65.0 26.8 68.5 22.8 72.3 19.4 75.0 16.4 76.9 14.6 6.0

7.0 46.1 26.1 55.2 23.3 61.0 22.6 65.1 20.7 69.6 17.5 72.7 14.7 75.0 13.2 76.7 11.4 7.0

8.0 38.3 23.7 49.9 20.3 56.8 19.6 61.6 18.8 66.8 16.0 70.4 13.1 73.0 11.8 75.0 11.0 8.0

9.0 28.7 19.5 44.1 19.4 52.4 18.5 58.0 16.8 64.0 15.0 68.0 12.0 71.0 10.7 73.2 10.0 9.0

10.0 13.2 16.3 37.5 16.2 47.7 16.1 54.2 15.2 61.1 13.7 65.7 11.4 68.9 9.8 71.4 9.1 10.0

11.0 29.7 13.9 42.6 13.7 50.3 13.6 58.1 12.4 63.2 10.8 66.9 9.0 69.6 8.2 11.0

12.0 18.9 11.9 37.0 11.8 46.1 11.7 55.0 11.3 60.7 9.9 64.8 8.2 67.8 7.5 12.0

13.0 30.3 10.3 41.6 10.2 51.8 10.4 58.2 9.2 62.7 7.8 66.0 7.1 13.0

14.0 21.9 9.0 36.5 8.9 48.4 9.4 55.6 8.5 60.5 7.5 64.1 6.8 14.0

15.0 4.6 7.9 30.8 7.8 44.9 8.3 52.9 8.0 58.3 7.0 62.2 6.4 15.0

16.0 23.8 6.9 41.1 7.4 50.0 7.4 56.0 6.5 60.3 6.0 16.0

17.0 13.6 6.1 36.9 6.6 47.1 6.8 53.6 6.1 58.3 5.6 17.0

18.0 32.3 5.9 44.0 6.1 51.2 5.7 56.3 5.2 18.0

19.0 27.0 5.3 40.7 5.5 48.7 5.4 54.2 4.9 19.0

20.0 20.4 4.8 37.2 5.0 46.1 5.1 52.1 4.6 20.0

21.0 9.9 4.3 33.3 4.5 43.3 4.8 49.9 4.4 21.0

22.0 29.0 4.1 40.5 4.3 47.6 4.1 22.0

23.0 24.0 3.7 37.4 3.9 45.3 3.9 23.0

24.0 17.6 3.3 34.1 3.6 42.8 3.6 24.0

25.0 6.2 3.0 30.4 3.3 40.3 3.3 25.0

26.0 26.3 3.0 37.5 3.0 26.0

27.0 21.5 2.7 34.6 2.7 27.0

28.0 15.2 2.4 31.5 2.5 28.0

29.0 28.0 2.2 29.0

30.0 24.1 2.0 30.0

31.0 19.4 1.8 31.0

32.0 13.1 1.6 32.0

Parts of Line

10 8 7 6 5 4 4 3 Parts of Line

Telescoping Sequence (%) I 0% 33% 67% 100% 100% 100% 100% 100% III 0% 0% 0% 0% 25% 50% 75% 100% IIIII 0% 0% 0% 0% 25% 50% 75% 100% III

Notes:1. Capacities appearing above the bold line are based on structural strength. Capacities appearing below the bold line are based on stability and do not exceed 75% of tipping. 2. During operation the wind speed must not exceed 36 km/hr. 3. An * on the chart indicates positions without rated loads. These areas are susceptible to instability either in the forward direction or the backwards direction. Even without a load, the boom should not be positioned in these specific configurations ofthe load chart to avoid tipping. Warning: All stowed load handling devices are considered loads. See deduction chart for values.

16.3t COUNTERWEIGHT

Page 10: GTC-700EX - Tadano Mantis Cranes · gtc-700ex 70t telesoi boo craler crane specification sheet no. 491-11/13 as please read, understand, and follow the manuals furnished with the

10

GTC-700EX 70t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. 491-11/13 AS

LOAD CHARTS LIFTING CAPACITIES - LOADS IN METRIC TONMANTIS Model GTC-700EX LOAD CHART 34.0m BOOM

TMC# 138731 - 15 - Rev 0 063011

CHART #5TRAVEL SPEEDS UP TO 1.0 km/h – LEVEL 0°TO 2°

MAIN BOOM with TRACKS FULLY EXTENDED 15.9t COUNTERWEIGHT

MAIN BOOM LENGTH (m)

11.4 13.8 16.2 18.6 22.5 26.3 30.2 34.0 RADIUS (m)

s ° s ° s ° s ° s ° s ° s ° s ° RADIUS

(m)

3.0 70.4 70.0 73.9 48.8 76.4 47.6 3.0

3.5 67.6 64.0 71.7 47.6 74.5 45.9 76.6 42.3 3.5

4.0 64.9 58.1 69.5 46.8 72.7 44.3 75.0 39.5 77.6 29.5 4.0

4.5 62.0 52.5 67.3 46.3 70.8 42.9 73.4 37.5 76.3 29.3 4.5

5.0 59.1 47.6 65.0 43.6 68.9 40.7 71.8 35.4 75.0 28.6 77.2 23.4 5.0

6.0 52.9 36.4 60.2 36.2 65.0 34.0 68.5 31.2 72.3 26.9 75.0 23.1 76.9 19.8 6.0

7.0 46.1 27.8 55.2 27.6 61.0 27.5 65.1 26.5 69.6 24.3 72.7 20.7 75.0 17.9 76.7 14.7 7.0

8.0 38.3 22.2 49.9 22.1 56.8 21.9 61.6 21.8 66.8 21.6 70.4 18.5 73.0 16.0 75.0 14.2 8.0

9.0 28.7 18.3 44.1 18.2 52.4 18.1 58.0 17.9 64.0 18.4 68.0 16.9 71.0 14.5 73.2 12.8 9.0

10.0 13.2 15.4 37.5 15.3 47.7 15.2 54.2 15.1 61.1 15.5 65.7 15.8 68.9 13.3 71.4 11.7 10.0

11.0 29.7 13.1 42.6 13.0 50.3 12.9 58.1 13.3 63.2 13.6 66.9 12.2 69.6 10.6 11.0

12.0 18.9 11.4 37.0 11.3 46.1 11.1 55.0 11.6 60.7 11.8 64.8 11.2 67.8 9.6 12.0

13.0 30.3 9.8 41.6 9.7 51.8 10.2 58.2 10.4 62.7 10.6 66.0 9.2 13.0

14.0 21.9 8.7 36.5 8.6 48.4 9.0 55.6 9.2 60.5 9.4 64.1 8.8 14.0

15.0 4.6 7.7 30.8 7.6 44.9 8.0 52.9 8.2 58.3 8.4 62.2 8.2 15.0

16.0 23.8 6.7 41.1 7.1 50.0 7.4 56.0 7.6 60.3 7.6 16.0

17.0 13.6 6.0 36.9 6.4 47.1 6.6 53.6 6.8 58.3 6.9 17.0

18.0 32.3 5.8 44.0 6.0 51.2 6.2 56.3 6.2 18.0

19.0 27.0 5.2 40.7 5.4 48.7 5.6 54.2 5.7 19.0

20.0 20.4 4.7 37.2 4.9 46.1 5.1 52.1 5.2 20.0

21.0 9.9 4.3 33.3 4.5 43.3 4.7 49.9 4.7 21.0

22.0 29.0 4.1 40.5 4.3 47.6 4.3 22.0

23.0 24.0 3.7 37.4 3.9 45.3 4.0 23.0

24.0 17.6 3.4 34.1 3.6 42.8 3.6 24.0

25.0 6.2 3.1 30.4 3.3 40.3 3.3 25.0

26.0 26.3 3.0 37.5 3.1 26.0

27.0 21.5 2.8 34.6 2.8 27.0

28.0 15.2 2.5 31.5 2.6 28.0

29.0 28.0 2.3 29.0

30.0 24.1 2.1 30.0

31.0 19.4 1.9 31.0

32.0 13.1 1.7 32.0

Parts of Line

10 8 7 6 5 4 4 3 Parts of Line

Telescoping Sequence (%) I 0% 33% 67% 100% 100% 100% 100% 100% III 0% 0% 0% 0% 25% 50% 75% 100% IIIII 0% 0% 0% 0% 25% 50% 75% 100% III

Notes:1. Capacities appearing above the bold line are based on structural strength. Capacities appearing below the bold line are based on stability and do not exceed 66.6% of tipping. 2. During operation the wind speed must not exceed 36 km/hr. 3. An * on the chart indicates positions without rated loads. These areas are susceptible to instability either in the forward direction or the backwards direction. Even without a load, the boom should not be positioned in these specific configurations ofthe load chart to avoid tipping. Warning: All stowed load handling devices are considered loads. See deduction chart for values.

16.3t COUNTERWEIGHT

Page 11: GTC-700EX - Tadano Mantis Cranes · gtc-700ex 70t telesoi boo craler crane specification sheet no. 491-11/13 as please read, understand, and follow the manuals furnished with the

11

GTC-700EX 70t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. 491-11/13 AS

LOAD CHARTS LIFTING CAPACITIES - LOADS IN METRIC TONMANTIS Model GTC-700EX LOAD CHART 34.0m BOOM

TMC# 138731 - 17 - Rev 0 063011

CHART #7 NO TRAVEL – LEVEL 0°TO 1°

MAIN BOOM with TRACKS FULLY EXTENDED 7.9t COUNTERWEIGHT

MAIN BOOM LENGTH (m)

11.4 13.8 16.2 18.6 22.5 26.3 30.2 34.0 RADIUS (m)

s ° s ° s ° s ° s ° s ° s ° s ° RADIUS

(m)

3.0 70.4 70.0 73.9 48.8 76.4 47.6 3.0

3.5 67.6 64.0 71.7 47.6 74.5 45.9 76.6 42.3 3.5

4.0 64.9 58.1 69.5 46.8 72.7 44.3 75.0 39.5 77.6 29.5 4.0

4.5 62.0 47.9 67.3 44.9 70.8 42.0 73.4 37.5 76.3 29.3 4.5

5.0 59.1 40.5 65.0 38.2 68.9 36.0 71.8 33.9 75.0 28.6 77.2 23.4 5.0

6.0 52.9 29.7 60.2 29.1 65.0 27.6 68.5 26.1 72.3 25.4 75.0 23.1 76.9 20.9 6.0

7.0 46.1 22.3 55.2 22.5 61.0 22.1 65.1 20.9 69.6 20.7 72.7 20.2 75.0 18.8 76.7 16.3 7.0

8.0 38.3 17.6 49.9 17.8 56.8 17.7 61.6 17.2 66.8 17.2 70.4 17.0 73.0 16.5 75.0 15.8 8.0

9.0 28.7 14.2 44.1 14.4 52.4 14.4 58.0 14.2 64.0 14.5 68.0 14.5 71.0 14.2 73.2 13.8 9.0

10.0 13.2 11.7 37.5 12.0 47.7 11.9 54.2 11.7 61.1 12.5 65.7 12.5 68.9 12.3 71.4 12.0 10.0

11.0 29.7 10.1 42.6 10.0 50.3 9.9 58.1 10.6 63.2 10.9 66.9 10.8 69.6 10.6 11.0

12.0 18.9 8.6 37.0 8.5 46.1 8.4 55.0 9.1 60.7 9.5 64.8 9.5 67.8 9.4 12.0

13.0 30.3 7.3 41.6 7.2 51.8 7.8 58.2 8.3 62.7 8.4 66.0 8.3 13.0

14.0 21.9 6.3 36.5 6.1 48.4 6.8 55.6 7.3 60.5 7.5 64.1 7.4 14.0

15.0 4.6 5.6 30.8 5.2 44.9 6.0 52.9 6.4 58.3 6.6 62.2 6.7 15.0

16.0 23.8 4.5 41.1 5.2 50.0 5.7 56.0 5.9 60.3 6.0 16.0

17.0 13.6 3.8 36.9 4.5 47.1 5.1 53.6 5.3 58.3 5.4 17.0

18.0 32.3 4.0 44.0 4.5 51.2 4.7 56.3 4.8 18.0

19.0 27.0 3.4 40.7 4.0 48.7 4.2 54.2 4.3 19.0

20.0 20.4 3.0 37.2 3.5 46.1 3.7 52.1 3.9 20.0

21.0 9.9 2.6 33.3 3.1 43.3 3.3 49.9 3.4 21.0

22.0 29.0 2.7 40.5 2.9 47.6 3.1 22.0

23.0 24.0 2.4 37.4 2.6 45.3 2.7 23.0

24.0 17.6 2.1 34.1 2.3 42.8 2.4 24.0

25.0 6.2 1.8 30.4 2.0 40.3 2.1 25.0

26.0 26.3 1.8 37.5 1.9 26.0

27.0 21.5 1.5 34.6 1.7 27.0

28.0 15.2 1.3 31.5 1.4 28.0

29.0 28.0 1.2 29.0

30.0 24.1 1.1 30.0

31.0 19.4 0.9 31.0

32.0 13.1 0.7 32.0

Parts of Line

10 8 7 6 5 4 4 3 Parts of Line

Telescoping Sequence (%) I 0% 33% 67% 100% 100% 100% 100% 100% III 0% 0% 0% 0% 25% 50% 75% 100% IIIII 0% 0% 0% 0% 25% 50% 75% 100% III

Notes:1. Capacities appearing above the bold line are based on structural strength. Capacities appearing below the bold line are based on stability and do not exceed 75% of tipping. 2. During operation the wind speed must not exceed 36 km/hr. 3. An * on the chart indicates positions without rated loads. These areas are susceptible to instability either in the forward direction or the backwards direction. Even without a load, the boom should not be positioned in these specific configurations ofthe load chart to avoid tipping. Warning: All stowed load handling devices are considered loads. See deduction chart for values.

8.35t COUNTERWEIGHT

Page 12: GTC-700EX - Tadano Mantis Cranes · gtc-700ex 70t telesoi boo craler crane specification sheet no. 491-11/13 as please read, understand, and follow the manuals furnished with the

12

GTC-700EX 70t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. 491-11/13 AS

LOAD CHARTS LIFTING CAPACITIES - LOADS IN METRIC TONMANTIS Model GTC-700EX LOAD CHART 34.0m BOOM

TMC# 138731 - 20 - Rev 0 063011

CHART #10 NO TRAVEL – LEVEL 3° TO 4°

MAIN BOOM with TRACKS FULLY EXTENDED 7.9t COUNTERWEIGHT

MAIN BOOM LENGTH (m)

11.4 13.8 16.2 18.6 22.5 26.3 30.2 34.0 RADIUS (m)

s ° s ° s ° s ° s ° s ° s ° s ° RADIUS

(m)

3.0 70.4 52.5 73.9 36.6 76.4 35.2 3.0

3.5 67.6 48.0 71.7 35.7 74.5 34.0 76.6 30.9 3.5

4.0 64.9 43.6 69.5 35.1 72.7 32.8 75.0 28.8 77.6 21.2 4.0

4.5 62.0 37.4 67.3 34.0 70.8 30.9 73.4 27.4 76.3 21.1 4.5

5.0 59.1 32.6 65.0 29.8 68.9 27.3 71.8 25.0 75.0 20.6 77.2 16.6 5.0

6.0 52.9 25.5 60.2 23.6 65.0 21.8 68.5 20.1 72.3 19.0 75.0 16.4 76.9 14.6 6.0

7.0 46.1 20.8 55.2 19.3 61.0 17.9 65.1 16.6 69.6 15.9 72.7 14.7 75.0 13.2 76.7 11.4 7.0

8.0 38.3 16.5 49.9 16.2 56.8 15.0 61.6 13.9 66.8 13.6 70.4 13.1 73.0 11.8 75.0 11.0 8.0

9.0 28.7 13.3 44.1 13.5 52.4 12.8 58.0 11.8 64.0 11.7 68.0 11.4 71.0 10.7 73.2 10.0 9.0

10.0 13.2 10.9 37.5 11.1 47.7 11.0 54.2 10.2 61.1 10.1 65.7 10.0 68.9 9.6 71.4 9.1 10.0

11.0 29.7 9.3 42.6 9.3 50.3 8.8 58.1 8.9 63.2 8.8 66.9 8.5 69.6 8.2 11.0

12.0 18.9 7.9 37.0 7.8 46.1 7.6 55.0 7.8 60.7 7.8 64.8 7.6 67.8 7.3 12.0

13.0 30.3 6.7 41.6 6.5 51.8 6.9 58.2 7.0 62.7 6.8 66.0 6.6 13.0

14.0 21.9 5.7 36.5 5.5 48.4 6.1 55.6 6.2 60.5 6.1 64.1 5.9 14.0

15.0 4.6 5.1 30.8 4.7 44.9 5.4 52.9 5.6 58.3 5.5 62.2 5.3 15.0

16.0 23.8 4.0 41.1 4.7 50.0 5.0 56.0 4.9 60.3 4.8 16.0

17.0 13.6 3.4 36.9 4.1 47.1 4.5 53.6 4.4 58.3 4.4 17.0

18.0 32.3 3.6 44.0 4.0 51.2 4.0 56.3 3.9 18.0

19.0 27.0 3.1 40.7 3.6 48.7 3.6 54.2 3.6 19.0

20.0 20.4 2.7 37.2 3.1 46.1 3.3 52.1 3.2 20.0

21.0 9.9 2.3 33.3 2.8 43.3 3.0 49.9 2.9 21.0

22.0 29.0 2.4 40.5 2.6 47.6 2.6 22.0

23.0 24.0 2.1 37.4 2.3 45.3 2.4 23.0

24.0 17.6 1.9 34.1 2.1 42.8 2.1 24.0

25.0 6.2 1.6 30.4 1.8 40.3 1.9 25.0

26.0 26.3 1.6 37.5 1.7 26.0

27.0 21.5 1.4 34.6 1.5 27.0

28.0 15.2 1.2 31.5 1.3 28.0

29.0 28.0 1.1 29.0

30.0 24.1 1.0 30.0

31.0 19.4 0.8 31.0

32.0 13.1 0.7 32.0

Parts of Line

10 8 7 6 5 4 4 3 Parts of Line

Telescoping Sequence (%) I 0% 33% 67% 100% 100% 100% 100% 100% III 0% 0% 0% 0% 25% 50% 75% 100% IIIII 0% 0% 0% 0% 25% 50% 75% 100% III

Notes:1. Capacities appearing above the bold line are based on structural strength. Capacities appearing below the bold line are based on stability and do not exceed 75% of tipping. 2. During operation the wind speed must not exceed 36 km/hr. 3. An * on the chart indicates positions without rated loads. These areas are susceptible to instability either in the forward direction or the backwards direction. Even without a load, the boom should not be positioned in these specific configurations ofthe load chart to avoid tipping. Warning: All stowed load handling devices are considered loads. See deduction chart for values.

8.35t COUNTERWEIGHT

Page 13: GTC-700EX - Tadano Mantis Cranes · gtc-700ex 70t telesoi boo craler crane specification sheet no. 491-11/13 as please read, understand, and follow the manuals furnished with the

13

GTC-700EX 70t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. 491-11/13 AS

LOAD CHARTS LIFTING CAPACITIES - LOADS IN METRIC TONMANTIS Model GTC-700EX LOAD CHART 34.0m BOOM

TMC# 138731 - 21 - Rev 0 063011

CHART #11TRAVEL SPEEDS UP TO 1.0 km/h – LEVEL 0°TO 2°

MAIN BOOM with TRACKS FULLY EXTENDED 7.9t COUNTERWEIGHT

MAIN BOOM LENGTH (m)

11.4 13.8 16.2 18.6 22.5 26.3 30.2 34.0 RADIUS (m)

s ° s ° s ° s ° s ° s ° s ° s ° RADIUS

(m)

3.0 70.4 70.0 73.9 48.8 76.4 47.6 3.0

3.5 67.6 61.4 71.7 47.6 74.5 45.9 76.6 42.3 3.5

4.0 64.9 50.2 69.5 45.7 72.7 41.8 75.0 38.3 77.6 29.5 4.0

4.5 62.0 42.2 67.3 38.9 70.8 35.8 73.4 33.1 76.3 29.3 4.5

5.0 59.1 36.2 65.0 33.6 68.9 31.2 71.8 28.9 75.0 27.2 77.2 23.4 5.0

6.0 52.9 26.4 60.2 26.2 65.0 24.5 68.5 22.8 72.3 21.9 75.0 20.9 76.9 19.8 6.0

7.0 46.1 19.8 55.2 20.0 61.0 19.9 65.1 18.6 69.6 18.1 72.7 17.5 75.0 16.7 76.7 14.7 7.0

8.0 38.3 15.6 49.9 15.8 56.8 15.7 61.6 15.4 66.8 15.2 70.4 14.9 73.0 14.3 75.0 13.7 8.0

9.0 28.7 12.6 44.1 12.8 52.4 12.8 58.0 12.6 64.0 13.0 68.0 12.8 71.0 12.4 73.2 12.0 9.0

10.0 13.2 10.4 37.5 10.6 47.7 10.6 54.2 10.4 61.1 11.1 65.7 11.2 68.9 10.9 71.4 10.5 10.0

11.0 29.7 8.9 42.6 8.9 50.3 8.8 58.1 9.4 63.2 9.8 66.9 9.6 69.6 9.3 11.0

12.0 18.9 7.6 37.0 7.6 46.1 7.4 55.0 8.0 60.7 8.5 64.8 8.5 67.8 8.3 12.0

13.0 30.3 6.5 41.6 6.4 51.8 7.0 58.2 7.4 62.7 7.6 66.0 7.4 13.0

14.0 21.9 5.6 36.5 5.5 48.4 6.1 55.6 6.5 60.5 6.7 64.1 6.6 14.0

15.0 4.6 5.0 30.8 4.7 44.9 5.3 52.9 5.7 58.3 5.9 62.2 6.0 15.0

16.0 23.8 4.1 41.1 4.7 50.0 5.1 56.0 5.2 60.3 5.4 16.0

17.0 13.6 3.5 36.9 4.1 47.1 4.5 53.6 4.7 58.3 4.8 17.0

18.0 32.3 3.6 44.0 4.0 51.2 4.2 56.3 4.3 18.0

19.0 27.0 3.2 40.7 3.6 48.7 3.7 54.2 3.9 19.0

20.0 20.4 2.8 37.2 3.2 46.1 3.4 52.1 3.5 20.0

21.0 9.9 2.4 33.3 2.9 43.3 3.0 49.9 3.1 21.0

22.0 29.0 2.5 40.5 2.7 47.6 2.8 22.0

23.0 24.0 2.2 37.4 2.4 45.3 2.5 23.0

24.0 17.6 1.9 34.1 2.1 42.8 2.3 24.0

25.0 6.2 1.7 30.4 1.9 40.3 2.0 25.0

26.0 26.3 1.6 37.5 1.8 26.0

27.0 21.5 1.4 34.6 1.6 27.0

28.0 15.2 1.2 31.5 1.4 28.0

29.0 28.0 1.2 29.0

30.0 24.1 1.0 30.0

31.0 19.4 0.8 31.0

32.0 13.1 0.7 32.0

Parts of Line

10 8 7 6 5 4 4 3 Parts of Line

Telescoping Sequence (%) I 0% 33% 67% 100% 100% 100% 100% 100% III 0% 0% 0% 0% 25% 50% 75% 100% IIIII 0% 0% 0% 0% 25% 50% 75% 100% III

Notes:1. Capacities appearing above the bold line are based on structural strength. Capacities appearing below the bold line are based on stability and do not exceed 66.6% of tipping. 2. During operation the wind speed must not exceed 36 km/hr. 3. An * on the chart indicates positions without rated loads. These areas are susceptible to instability either in the forward direction or the backwards direction. Even without a load, the boom should not be positioned in these specific configurations ofthe load chart to avoid tipping. Warning: All stowed load handling devices are considered loads. See deduction chart for values.

8.35t COUNTERWEIGHT

Page 14: GTC-700EX - Tadano Mantis Cranes · gtc-700ex 70t telesoi boo craler crane specification sheet no. 491-11/13 as please read, understand, and follow the manuals furnished with the

14

GTC-700EX 70t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. 491-11/13 AS

LOAD CHARTS LIFTING CAPACITIES - LOADS IN METRIC TONMANTIS Model GTC-700EX LOAD CHART 34.0m BOOM

TMC# 138731 - 23 - Rev 0 063011

CHART #13 NO TRAVEL – LEVEL 0° TO 1°

MAIN BOOM with TRACKS FULLY EXTENDED 0t COUNTERWEIGHT

MAIN BOOM LENGTH (m)

11.4 13.8 16.2 18.6 22.5 26.3 30.2 34.0 RADIUS (m)

s ° s ° s ° s ° s ° s ° s ° s ° RADIUS

(m)

3.0 70.4 64.9 73.9 48.8 76.4 47.6 3.0

3.5 67.6 51.2 71.7 46.3 74.5 42.3 76.6 38.8 3.5

4.0 64.9 40.3 69.5 37.0 72.7 34.2 75.0 31.6 77.6 29.4 4.0

4.5 62.0 33.0 67.3 30.5 70.8 28.4 73.4 26.5 76.3 25.0 4.5

5.0 59.1 27.7 65.0 25.8 68.9 24.1 71.8 22.6 75.0 21.5 77.2 20.4 5.0

6.0 52.9 20.4 60.2 19.3 65.0 18.2 68.5 17.1 72.3 16.6 75.0 15.9 76.9 15.4 6.0

7.0 46.1 15.1 55.2 15.0 61.0 14.2 65.1 13.4 69.6 13.2 72.7 12.8 75.0 12.5 76.7 12.2 7.0

8.0 38.3 11.6 49.9 11.6 56.8 11.4 61.6 10.8 66.8 10.7 70.4 10.5 73.0 10.4 75.0 10.2 8.0

9.0 28.7 9.2 44.1 9.2 52.4 9.1 58.0 8.8 64.0 8.8 68.0 8.7 71.0 8.7 73.2 8.6 9.0

10.0 13.2 7.5 37.5 7.4 47.7 7.4 54.2 7.2 61.1 7.3 65.7 7.3 68.9 7.4 71.4 7.4 10.0

11.0 29.7 6.1 42.6 6.0 50.3 5.9 58.1 6.1 63.2 6.2 66.9 6.3 69.6 6.3 11.0

12.0 18.9 4.9 37.0 4.9 46.1 4.8 55.0 5.2 60.7 5.2 64.8 5.4 67.8 5.4 12.0

13.0 30.3 4.0 41.6 3.9 51.8 4.3 58.2 4.4 62.7 4.6 66.0 4.7 13.0

14.0 21.9 3.2 36.5 3.1 48.4 3.6 55.6 3.7 60.5 3.9 64.1 4.1 14.0

15.0 4.6 2.5 30.8 2.5 44.9 2.9 52.9 3.2 58.3 3.4 62.2 3.5 15.0

16.0 23.8 1.9 41.1 2.4 50.0 2.6 56.0 2.9 60.3 3.0 16.0

17.0 13.6 1.4 36.9 1.9 47.1 2.2 53.6 2.4 58.3 2.6 17.0

18.0 32.3 1.5 44.0 1.7 51.2 2.0 56.3 2.2 18.0

19.0 27.0 1.1 40.7 1.4 48.7 1.7 54.2 1.9 19.0

20.0 20.4 0.8 37.2 1.0 46.1 1.4 52.1 1.6 20.0

21.0 9.9 0.5 33.3 0.8 43.3 1.1 49.9 1.3 21.0

22.0 29.0 0.5 40.5 0.8 47.6 1.1 22.0

23.0 24.0 * 37.4 0.6 45.3 0.8 23.0

24.0 17.6 * 34.1 * 42.8 0.6 24.0

25.0 6.2 * 30.4 * 40.3 * 25.0

26.0 26.3 * 37.5 * 26.0

27.0 21.5 * 34.6 * 27.0

28.0 15.2 * 31.5 * 28.0

29.0 28.0 * 29.0

30.0 24.1 * 30.0

31.0 19.4 * 31.0

32.0 13.1 * 32.0

Parts of Line

10 8 7 6 5 4 4 3 Parts of Line

Telescoping Sequence (%) I 0% 33% 67% 100% 100% 100% 100% 100% III 0% 0% 0% 0% 25% 50% 75% 100% IIIII 0% 0% 0% 0% 25% 50% 75% 100% III

Notes:1. Capacities appearing above the bold line are based on structural strength. Capacities appearing below the bold line are based on stability and do not exceed 75% of tipping. 2. During operation the wind speed must not exceed 36 km/hr. 3. An * on the chart indicates positions without rated loads. These areas are susceptible to instability either in the forward direction or the backwards direction. Even without a load, the boom should not be positioned in these specific configurations ofthe load chart to avoid tipping. Warning: All stowed load handling devices are considered loads. See deduction chart for values.

Page 15: GTC-700EX - Tadano Mantis Cranes · gtc-700ex 70t telesoi boo craler crane specification sheet no. 491-11/13 as please read, understand, and follow the manuals furnished with the

15

GTC-700EX 70t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. 491-11/13 AS

LOAD CHARTS LIFTING CAPACITIES - LOADS IN METRIC TONMANTIS Model GTC-700EX LOAD CHART 34.0m BOOM

TMC# 138731 - 26 - Rev 0 063011

CHART #16 NO TRAVEL – LEVEL 3° TO 4°

MAIN BOOM with TRACKS FULLY EXTENDED 0t COUNTERWEIGHT

MAIN BOOM LENGTH (m)

11.4 13.8 16.2 18.6 22.5 26.3 30.2 34.0 RADIUS (m)

s ° s ° s ° s ° s ° s ° s ° s ° RADIUS

(m)

3.0 70.4 44.9 73.9 36.6 76.4 33.6 3.0

3.5 67.6 36.1 71.7 31.5 74.5 27.9 76.6 24.9 3.5

4.0 64.9 30.0 69.5 26.5 72.7 23.7 75.0 21.3 77.6 19.2 4.0

4.5 62.0 25.4 67.3 22.7 70.8 20.4 73.4 18.5 76.3 16.9 4.5

5.0 59.1 21.9 65.0 19.7 68.9 17.9 71.8 16.2 75.0 15.0 77.2 13.8 5.0

6.0 52.9 16.9 60.2 15.3 65.0 14.0 68.5 12.8 72.3 12.0 75.0 11.2 76.9 10.6 6.0

7.0 46.1 13.5 55.2 12.3 61.0 11.2 65.1 10.3 69.6 9.8 72.7 9.3 75.0 8.9 76.7 8.5 7.0

8.0 38.3 10.9 49.9 10.0 56.8 9.2 61.6 8.4 66.8 8.1 70.4 7.8 73.0 7.5 75.0 7.2 8.0

9.0 28.7 8.6 44.1 8.3 52.4 7.6 58.0 6.9 64.0 6.8 68.0 6.5 71.0 6.4 73.2 6.2 9.0

10.0 13.2 6.8 37.5 6.8 47.7 6.3 54.2 5.7 61.1 5.7 65.7 5.5 68.9 5.4 71.4 5.3 10.0

11.0 29.7 5.5 42.6 5.3 50.3 4.8 58.1 4.8 63.2 4.7 66.9 4.7 69.6 4.6 11.0

12.0 18.9 4.5 37.0 4.4 46.1 3.9 55.0 4.0 60.7 4.0 64.8 4.0 67.8 4.0 12.0

13.0 30.3 3.6 41.6 3.3 51.8 3.4 58.2 3.3 62.7 3.4 66.0 3.4 13.0

14.0 21.9 2.9 36.5 2.7 48.4 2.8 55.6 2.8 60.5 2.9 64.1 3.0 14.0

15.0 4.6 2.3 30.8 2.2 44.9 2.3 52.9 2.3 58.3 2.5 62.2 2.5 15.0

16.0 23.8 1.7 41.1 1.9 50.0 1.9 56.0 2.1 60.3 2.2 16.0

17.0 13.6 1.3 36.9 1.5 47.1 1.6 53.6 1.7 58.3 1.8 17.0

18.0 32.3 1.2 44.0 1.3 51.2 1.4 56.3 1.5 18.0

19.0 27.0 0.9 40.7 1.0 48.7 1.1 54.2 1.3 19.0

20.0 20.4 0.7 37.2 0.7 46.1 0.9 52.1 1.0 20.0

21.0 9.9 * 33.3 0.5 43.3 0.7 49.9 0.8 21.0

22.0 29.0 * 40.5 * 47.6 0.6 22.0

23.0 24.0 * 37.4 * 45.3 * 23.0

24.0 17.6 * 34.1 * 42.8 * 24.0

25.0 6.2 * 30.4 * 40.3 * 25.0

26.0 26.3 * 37.5 * 26.0

27.0 21.5 * 34.6 * 27.0

28.0 15.2 * 31.5 * 28.0

29.0 28.0 * 29.0

30.0 24.1 * 30.0

31.0 19.4 * 31.0

32.0 13.1 * 32.0

Parts of Line

10 8 7 6 5 4 4 3 Parts of Line

Telescoping Sequence (%) I 0% 33% 67% 100% 100% 100% 100% 100% III 0% 0% 0% 0% 25% 50% 75% 100% IIIII 0% 0% 0% 0% 25% 50% 75% 100% III

Notes:1. Capacities appearing above the bold line are based on structural strength. Capacities appearing below the bold line are basedon stability and do not exceed 75% of tipping. 2. During operation the wind speed must not exceed 36 km/hr. 3. An * on the chart indicates positions without rated loads. These areas are susceptible to instability either in the forward direction or the backwards direction. Even without a load, the boom should not be positioned in these specific configurations ofthe load chart to avoid tipping. Warning: All stowed load handling devices are considered loads. See deduction chart for values.

Page 16: GTC-700EX - Tadano Mantis Cranes · gtc-700ex 70t telesoi boo craler crane specification sheet no. 491-11/13 as please read, understand, and follow the manuals furnished with the

16

GTC-700EX 70t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. 491-11/13 AS

LOAD CHARTS LIFTING CAPACITIES - LOADS IN METRIC TONMANTIS Model GTC-700EX LOAD CHART 34.0m BOOM

TMC# 138731 - 27 - Rev 0 063011

CHART #17TRAVEL SPEEDS UP TO 1.0 km/h – LEVEL 0° TO 2°

MAIN BOOM with TRACKS FULLY EXTENDED 0t COUNTERWEIGHT

MAIN BOOM LENGTH (m)

11.4 13.8 16.2 18.6 22.5 26.3 30.2 34.0 RADIUS (m)

s ° s ° s ° s ° s ° s ° s ° s ° RADIUS

(m)

3.0 70.4 54.8 73.9 47.6 76.4 42.0 3.0

3.5 67.6 42.6 71.7 37.8 74.5 33.9 76.6 30.6 3.5

4.0 64.9 34.6 69.5 31.1 72.7 28.2 75.0 25.7 77.6 23.5 4.0

4.5 62.0 28.8 67.3 26.2 70.8 24.0 73.4 22.0 76.3 20.4 4.5

5.0 59.1 24.6 65.0 22.4 68.9 20.7 71.8 19.0 75.0 17.9 77.2 16.7 5.0

6.0 52.9 18.1 60.2 17.1 65.0 15.9 68.5 14.7 72.3 14.1 75.0 13.3 76.9 12.7 6.0

7.0 46.1 13.4 55.2 13.3 61.0 12.6 65.1 11.7 69.6 11.3 72.7 10.9 75.0 10.5 76.7 10.2 7.0

8.0 38.3 10.3 49.9 10.3 56.8 10.2 61.6 9.5 66.8 9.3 70.4 9.0 73.0 8.8 75.0 8.6 8.0

9.0 28.7 8.2 44.1 8.2 52.4 8.1 58.0 7.8 64.0 7.7 68.0 7.5 71.0 7.4 73.2 7.3 9.0

10.0 13.2 6.6 37.5 6.6 47.7 6.6 54.2 6.4 61.1 6.5 65.7 6.4 68.9 6.3 71.4 6.3 10.0

11.0 29.7 5.4 42.6 5.4 50.3 5.3 58.1 5.4 63.2 5.4 66.9 5.4 69.6 5.4 11.0

12.0 18.9 4.4 37.0 4.4 46.1 4.3 55.0 4.6 60.7 4.6 64.8 4.6 67.8 4.7 12.0

13.0 30.3 3.6 41.6 3.6 51.8 3.8 58.2 3.9 62.7 4.0 66.0 4.0 13.0

14.0 21.9 3.0 36.5 2.9 48.4 3.2 55.6 3.3 60.5 3.4 64.1 3.5 14.0

15.0 4.6 2.4 30.8 2.3 44.9 2.7 52.9 2.7 58.3 2.9 62.2 3.0 15.0

16.0 23.8 1.8 41.1 2.2 50.0 2.3 56.0 2.5 60.3 2.6 16.0

17.0 13.6 1.3 36.9 1.8 47.1 1.9 53.6 2.1 58.3 2.2 17.0

18.0 32.3 1.4 44.0 1.5 51.2 1.7 56.3 1.9 18.0

19.0 27.0 1.0 40.7 1.2 48.7 1.4 54.2 1.6 19.0

20.0 20.4 0.7 37.2 0.9 46.1 1.1 52.1 1.3 20.0

21.0 9.9 0.5 33.3 0.7 43.3 0.9 49.9 1.0 21.0

22.0 29.0 * 40.5 0.6 47.6 0.8 22.0

23.0 24.0 * 37.4 * 45.3 0.6 23.0

24.0 17.6 * 34.1 * 42.8 * 24.0

25.0 6.2 * 30.4 * 40.3 * 25.0

26.0 26.3 * 37.5 * 26.0

27.0 21.5 * 34.6 * 27.0

28.0 15.2 * 31.5 * 28.0

29.0 28.0 * 29.0

30.0 24.1 * 30.0

31.0 19.4 * 31.0

32.0 13.1 * 32.0

Parts of Line

10 8 7 6 5 4 4 3 Parts of Line

Telescoping Sequence (%) I 0% 33% 67% 100% 100% 100% 100% 100% III 0% 0% 0% 0% 25% 50% 75% 100% IIIII 0% 0% 0% 0% 25% 50% 75% 100% III

Notes:1. Capacities appearing above the bold line are based on structural strength. Capacities appearing below the bold line are based on stability and do not exceed 66.6% of tipping. 2. During operation the wind speed must not exceed 36 km/hr. 3. An * on the chart indicates positions without rated loads. These areas are susceptible to instability either in the forward direction or the backwards direction. Even without a load, the boom should not be positioned in these specific configurations ofthe load chart to avoid tipping. Warning: All stowed load handling devices are considered loads. See deduction chart for values.

Page 17: GTC-700EX - Tadano Mantis Cranes · gtc-700ex 70t telesoi boo craler crane specification sheet no. 491-11/13 as please read, understand, and follow the manuals furnished with the

17

GTC-700EX 70t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. 491-11/13 AS

LOAD CHARTS LIFTING CAPACITIES - LOADS IN METRIC TONMANTIS Model GTC-700EX LOAD CHART 34.0m BOOM

TMC# 138731 - 29 - Rev 0 063011

CHART #19 NO TRAVEL – LEVEL 0° TO 1°

MAIN BOOM with TRACKS RETRACTED 15.9t COUNTERWEIGHT

MAIN BOOM LENGTH (m)

11.4 13.8 16.2 18.6 22.5 26.3 30.2 34.0 RADIUS (m)

s ° s ° s ° s ° s ° s ° s ° s ° RADIUS

(m)

3.0 70.4 * 73.9 * 76.4 47.6 3.0

3.5 67.6 52.7 71.7 47.6 74.5 45.4 76.6 42.3 3.5

4.0 64.9 44.3 69.5 41.3 72.7 38.7 75.0 36.5 77.6 29.5 4.0

4.5 62.0 38.1 67.3 35.6 70.8 33.6 73.4 31.8 76.3 29.3 4.5

5.0 59.1 33.3 65.0 31.2 68.9 29.5 71.8 28.0 75.0 26.9 77.2 23.4 5.0

6.0 52.9 25.0 60.2 24.6 65.0 23.5 68.5 22.4 72.3 21.8 75.0 21.1 76.9 20.4 6.0

7.0 46.1 19.7 55.2 19.4 61.0 19.2 65.1 18.4 69.6 18.1 72.7 17.7 75.0 17.2 76.7 16.3 7.0

8.0 38.3 16.1 49.9 15.7 56.8 15.5 61.6 15.4 66.8 15.3 70.4 15.0 73.0 14.7 75.0 14.4 8.0

9.0 28.7 13.4 44.1 13.1 52.4 12.9 58.0 12.7 64.0 13.1 68.0 12.9 71.0 12.8 73.2 12.5 9.0

10.0 13.2 11.3 37.5 11.0 47.7 10.9 54.2 10.7 61.1 11.2 65.7 11.3 68.9 11.2 71.4 11.0 10.0

11.0 29.7 9.4 42.6 9.3 50.3 9.1 58.1 9.6 63.2 9.9 66.9 9.8 69.6 9.7 11.0

12.0 18.9 8.1 37.0 8.0 46.1 7.8 55.0 8.3 60.7 8.7 64.8 8.7 67.8 8.7 12.0

13.0 30.3 6.9 41.6 6.8 51.8 7.3 58.2 7.6 62.7 7.8 66.0 7.7 13.0

14.0 21.9 6.0 36.5 5.9 48.4 6.4 55.6 6.7 60.5 6.9 64.1 6.9 14.0

15.0 4.6 5.1 30.8 5.0 44.9 5.6 52.9 5.9 58.3 6.2 62.2 6.2 15.0

16.0 23.8 4.3 41.1 4.9 50.0 5.2 56.0 5.5 60.3 5.6 16.0

17.0 13.6 3.7 36.9 4.3 47.1 4.6 53.6 4.9 58.3 5.1 17.0

18.0 32.3 3.7 44.0 4.1 51.2 4.4 56.3 4.6 18.0

19.0 27.0 3.2 40.7 3.6 48.7 3.9 54.2 4.1 19.0

20.0 20.4 2.8 37.2 3.2 46.1 3.5 52.1 3.7 20.0

21.0 9.9 2.4 33.3 2.8 43.3 3.1 49.9 3.3 21.0

22.0 29.0 2.5 40.5 2.7 47.6 2.9 22.0

23.0 24.0 2.1 37.4 2.4 45.3 2.6 23.0

24.0 17.6 1.9 34.1 2.1 42.8 2.3 24.0

25.0 6.2 1.6 30.4 1.9 40.3 2.1 25.0

26.0 26.3 1.6 37.5 1.8 26.0

27.0 21.5 1.4 34.6 1.6 27.0

28.0 15.2 1.2 31.5 1.4 28.0

29.0 28.0 1.2 29.0

30.0 24.1 1.0 30.0

31.0 19.4 0.9 31.0

32.0 13.1 0.7 32.0

Parts of Line

8 7 7 6 5 4 4 3 Parts of Line

Telescoping Sequence (%) I 0% 33% 67% 100% 100% 100% 100% 100% III 0% 0% 0% 0% 25% 50% 75% 100% IIIII 0% 0% 0% 0% 25% 50% 75% 100% III

Notes:1. Capacities appearing above the bold line are based on structural strength. Capacities appearing below the bold line are based on stability and do not exceed 75% of tipping. 2. During operation the wind speed must not exceed 36 km/hr. 3. An * on the chart indicates positions without rated loads. These areas are susceptible to instability either in the forward direction or the backwards direction. Even without a load, the boom should not be positioned in these specific configurations ofthe load chart to avoid tipping. Warning: All stowed load handling devices are considered loads. See deduction chart for values.

16.3t COUNTERWEIGHT

Page 18: GTC-700EX - Tadano Mantis Cranes · gtc-700ex 70t telesoi boo craler crane specification sheet no. 491-11/13 as please read, understand, and follow the manuals furnished with the

18

GTC-700EX 70t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. 491-11/13 AS

LOAD CHARTS LIFTING CAPACITIES - LOADS IN METRIC TONMANTIS Model GTC-700EX LOAD CHART 34.0m BOOM

TMC# 138731 - 31 - Rev 0 063011

CHART #21TRAVEL SPEEDS UP TO 1.0 km/h – LEVEL 0° TO 2°

MAIN BOOM with TRACKS RETRACTED 15.9t COUNTERWEIGHT

MAIN BOOM LENGTH (m)

11.4 13.8 16.2 18.6 22.5 26.3 30.2 34.0 RADIUS (m)

s ° s ° s ° s ° s ° s ° s ° s ° RADIUS

(m)

3.0 70.4 * 73.9 * 76.4 45.0 3.0

3.5 67.6 45.9 71.7 41.7 74.5 38.3 76.6 35.4 3.5

4.0 64.9 39.3 69.5 36.0 72.7 33.2 75.0 30.9 77.6 28.8 4.0

4.5 62.0 34.2 67.3 31.5 70.8 29.2 73.4 27.3 76.3 25.6 4.5

5.0 59.1 29.6 65.0 27.9 68.9 25.9 71.8 24.3 75.0 23.0 77.2 21.8 5.0

6.0 52.9 22.2 60.2 21.9 65.0 21.0 68.5 19.7 72.3 19.0 75.0 18.1 76.9 17.3 6.0

7.0 46.1 17.5 55.2 17.2 61.0 17.0 65.1 16.4 69.6 15.9 72.7 15.4 75.0 14.8 76.7 14.2 7.0

8.0 38.3 14.3 49.9 14.0 56.8 13.8 61.6 13.7 66.8 13.6 70.4 13.2 73.0 12.8 75.0 12.4 8.0

9.0 28.7 11.9 44.1 11.6 52.4 11.4 58.0 11.3 64.0 11.7 68.0 11.5 71.0 11.2 73.2 10.9 9.0

10.0 13.2 10.0 37.5 9.8 47.7 9.6 54.2 9.5 61.1 10.0 65.7 10.1 68.9 9.9 71.4 9.6 10.0

11.0 29.7 8.4 42.6 8.2 50.3 8.1 58.1 8.5 63.2 8.8 66.9 8.7 69.6 8.6 11.0

12.0 18.9 7.2 37.0 7.1 46.1 7.0 55.0 7.4 60.7 7.7 64.8 7.8 67.8 7.7 12.0

13.0 30.3 6.1 41.6 6.0 51.8 6.4 58.2 6.7 62.7 6.9 66.0 6.9 13.0

14.0 21.9 5.3 36.5 5.2 48.4 5.6 55.6 5.9 60.5 6.1 64.1 6.2 14.0

15.0 4.6 4.6 30.8 4.5 44.9 5.0 52.9 5.3 58.3 5.5 62.2 5.6 15.0

16.0 23.8 4.0 41.1 4.4 50.0 4.7 56.0 4.9 60.3 5.0 16.0

17.0 13.6 3.4 36.9 3.9 47.1 4.1 53.6 4.4 58.3 4.5 17.0

18.0 32.3 3.4 44.0 3.7 51.2 3.9 56.3 4.1 18.0

19.0 27.0 3.0 40.7 3.3 48.7 3.5 54.2 3.7 19.0

20.0 20.4 2.6 37.2 2.9 46.1 3.1 52.1 3.3 20.0

21.0 9.9 2.3 33.3 2.6 43.3 2.8 49.9 3.0 21.0

22.0 29.0 2.3 40.5 2.5 47.6 2.7 22.0

23.0 24.0 2.0 37.4 2.3 45.3 2.4 23.0

24.0 17.6 1.7 34.1 2.0 42.8 2.2 24.0

25.0 6.2 1.5 30.4 1.7 40.3 1.9 25.0

26.0 26.3 1.5 37.5 1.7 26.0

27.0 21.5 1.3 34.6 1.5 27.0

28.0 15.2 1.1 31.5 1.3 28.0

29.0 28.0 1.1 29.0

30.0 24.1 1.0 30.0

31.0 19.4 0.8 31.0

32.0 13.1 0.7 32.0

Parts of Line

8 7 7 6 5 4 4 3 Parts of Line

Telescoping Sequence (%) I 0% 33% 67% 100% 100% 100% 100% 100% III 0% 0% 0% 0% 25% 50% 75% 100% IIIII 0% 0% 0% 0% 25% 50% 75% 100% III

Notes:1. Capacities appearing above the bold line are based on structural strength. Capacities appearing below the bold line are based on stability and do not exceed 66.6% of tipping. 2. During operation the wind speed must not exceed 36 km/hr. 3. An * on the chart indicates positions without rated loads. These areas are susceptible to instability either in the forward direction or the backwards direction. Even without a load, the boom should not be positioned in these specific configurations ofthe load chart to avoid tipping. Warning: All stowed load handling devices are considered loads. See deduction chart for values.

16.3t COUNTERWEIGHT

Page 19: GTC-700EX - Tadano Mantis Cranes · gtc-700ex 70t telesoi boo craler crane specification sheet no. 491-11/13 as please read, understand, and follow the manuals furnished with the

19

GTC-700EX 70t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. 491-11/13 AS

LOAD CHARTS LIFTING CAPACITIES - LOADS IN METRIC TONMANTIS Model GTC-700EX LOAD CHART 34.0m BOOM

TMC# 138731 - 34 - Rev 0 063011

CHART #24TRAVEL SPEEDS UP TO 1.0 km/h – LEVEL 0° TO 2°

MAIN BOOM with TRACKS RETRACTED 7.9t COUNTERWEIGHT

MAIN BOOM LENGTH (m)

11.4 13.8 16.2 18.6 22.5 26.3 30.2 34.0 RADIUS (m)

s ° s ° s ° s ° s ° s ° s ° s ° RADIUS

(m)

3.0 70.4 39.2 73.9 35.0 76.4 31.6 3.0

3.5 67.6 32.6 71.7 29.4 74.5 26.8 76.6 24.6 3.5

4.0 64.9 27.7 69.5 25.1 72.7 23.0 75.0 21.2 77.6 19.8 4.0

4.5 62.0 24.0 67.3 21.8 70.8 20.1 73.4 18.6 76.3 17.5 4.5

5.0 59.1 21.1 65.0 19.2 68.9 17.7 71.8 16.4 75.0 15.6 77.2 14.8 5.0

6.0 52.9 15.6 60.2 15.2 65.0 14.0 68.5 13.0 72.3 12.6 75.0 12.1 76.9 11.6 6.0

7.0 46.1 12.1 55.2 11.8 61.0 11.4 65.1 10.6 69.6 10.4 72.7 10.1 75.0 9.7 76.7 9.4 7.0

8.0 38.3 9.7 49.9 9.4 56.8 9.2 61.6 8.7 66.8 8.6 70.4 8.5 73.0 8.3 75.0 8.0 8.0

9.0 28.7 7.9 44.1 7.7 52.4 7.5 58.0 7.2 64.0 7.3 68.0 7.2 71.0 7.1 73.2 6.9 9.0

10.0 13.2 6.6 37.5 6.3 47.7 6.2 54.2 6.0 61.1 6.1 65.7 6.1 68.9 6.1 71.4 6.0 10.0

11.0 29.7 5.3 42.6 5.1 50.3 5.0 58.1 5.2 63.2 5.2 66.9 5.2 69.6 5.2 11.0

12.0 18.9 4.4 37.0 4.3 46.1 4.2 55.0 4.4 60.7 4.5 64.8 4.5 67.8 4.5 12.0

13.0 30.3 3.6 41.6 3.5 51.8 3.7 58.2 3.9 62.7 3.9 66.0 3.9 13.0

14.0 21.9 3.0 36.5 2.9 48.4 3.2 55.6 3.3 60.5 3.4 64.1 3.4 14.0

15.0 4.6 2.4 30.8 2.3 44.9 2.7 52.9 2.8 58.3 2.9 62.2 3.0 15.0

16.0 23.8 1.8 41.1 2.2 50.0 2.4 56.0 2.5 60.3 2.6 16.0

17.0 13.6 1.4 36.9 1.8 47.1 2.0 53.6 2.1 58.3 2.2 17.0

18.0 32.3 1.5 44.0 1.7 51.2 1.8 56.3 1.9 18.0

19.0 27.0 1.1 40.7 1.4 48.7 1.5 54.2 1.6 19.0

20.0 20.4 0.8 37.2 1.1 46.1 1.2 52.1 1.3 20.0

21.0 9.9 0.6 33.3 0.8 43.3 1.0 49.9 1.1 21.0

22.0 29.0 0.6 40.5 0.8 47.6 0.9 22.0

23.0 24.0 * 37.4 0.6 45.3 0.7 23.0

24.0 17.6 * 34.1 * 42.8 0.5 24.0

25.0 6.2 * 30.4 * 40.3 * 25.0

26.0 26.3 * 37.5 * 26.0

27.0 21.5 * 34.6 * 27.0

28.0 15.2 * 31.5 * 28.0

29.0 28.0 * 29.0

30.0 24.1 * 30.0

31.0 19.4 * 31.0

32.0 13.1 * 32.0

Parts of Line

10 8 7 6 5 4 4 3 Parts of Line

Telescoping Sequence (%) I 0% 33% 67% 100% 100% 100% 100% 100% III 0% 0% 0% 0% 25% 50% 75% 100% IIIII 0% 0% 0% 0% 25% 50% 75% 100% III

Notes:1. Capacities appearing above the bold line are based on structural strength. Capacities appearing below the bold line are basedon stability and do not exceed 66.6% of tipping. 2. During operation the wind speed must not exceed 36 km/hr. 3. An * on the chart indicates positions without rated loads. These areas are susceptible to instability either in the forward direction or the backwards direction. Even without a load, the boom should not be positioned in these specific configurations ofthe load chart to avoid tipping. Warning: All stowed load handling devices are considered loads. See deduction chart for values.

8.35t COUNTERWEIGHT

Page 20: GTC-700EX - Tadano Mantis Cranes · gtc-700ex 70t telesoi boo craler crane specification sheet no. 491-11/13 as please read, understand, and follow the manuals furnished with the

20

GTC-700EX 70t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. 491-11/13 AS

LOAD CHARTS LIFTING CAPACITIES - LOADS IN METRIC TONMANTIS Model GTC-700EX LOAD CHART 34.0m BOOM

TMC# 138731 - 54 - Rev 0 063011

CHART #44 NO TRAVEL – LEVEL 1° TO 2°

AUXILIARY NOSE SHEAVE with TRACKS RETRACTED 15.9t COUNTERWEIGHT

MAIN BOOM LENGTH (m)

11.4 13.8 16.2 18.6 22.5 26.3 30.2 34.0 RADIUS (m)

s ° s ° s ° s ° s ° s ° s ° s ° RADIUS

(m)

3.0 70.4 * 73.9 * 76.4 5.0 3.0

3.5 67.6 5.0 71.7 5.0 74.5 5.0 76.6 5.0 3.5

4.0 64.9 5.0 69.5 5.0 72.7 5.0 75.0 5.0 77.6 5.0 4.0

4.5 62.0 5.0 67.3 5.0 70.8 5.0 73.4 5.0 76.3 5.0 4.5

5.0 59.1 5.0 65.0 5.0 68.9 5.0 71.8 5.0 75.0 5.0 77.2 5.0 5.0

6.0 52.9 5.0 60.2 5.0 65.0 5.0 68.5 5.0 72.3 5.0 75.0 5.0 76.9 5.0 6.0

7.0 46.1 5.0 55.2 5.0 61.0 5.0 65.1 5.0 69.6 5.0 72.7 5.0 75.0 5.0 76.7 5.0 7.0

8.0 38.3 5.0 49.9 5.0 56.8 5.0 61.6 5.0 66.8 5.0 70.4 5.0 73.0 5.0 75.0 5.0 8.0

9.0 28.7 5.0 44.1 5.0 52.4 5.0 58.0 5.0 64.0 5.0 68.0 5.0 71.0 5.0 73.2 5.0 9.0

10.0 13.2 5.0 37.5 5.0 47.7 5.0 54.2 5.0 61.1 5.0 65.7 5.0 68.9 5.0 71.4 5.0 10.0

11.0 29.7 5.0 42.6 5.0 50.3 5.0 58.1 5.0 63.2 5.0 66.9 5.0 69.6 5.0 11.0

12.0 18.9 5.0 37.0 5.0 46.1 5.0 55.0 5.0 60.7 5.0 64.8 5.0 67.8 5.0 12.0

13.0 30.3 5.0 41.6 5.0 51.8 5.0 58.2 5.0 62.7 5.0 66.0 5.0 13.0

14.0 21.9 5.0 36.5 5.0 48.4 5.0 55.6 5.0 60.5 5.0 64.1 5.0 14.0

15.0 4.6 5.0 30.8 4.9 44.9 5.0 52.9 5.0 58.3 5.0 62.2 5.0 15.0

16.0 23.8 4.2 41.1 4.8 50.0 5.0 56.0 5.0 60.3 5.0 16.0

17.0 13.6 3.6 36.9 4.2 47.1 4.5 53.6 4.6 58.3 4.6 17.0

18.0 32.3 3.6 44.0 4.0 51.2 4.1 56.3 4.2 18.0

19.0 27.0 3.1 40.7 3.5 48.7 3.7 54.2 3.8 19.0

20.0 20.4 2.7 37.2 3.1 46.1 3.3 52.1 3.4 20.0

21.0 9.9 2.3 33.3 2.7 43.3 3.0 49.9 3.1 21.0

22.0 29.0 2.4 40.5 2.6 47.6 2.8 22.0

23.0 24.0 2.0 37.4 2.3 45.3 2.5 23.0

24.0 17.6 1.8 34.1 2.0 42.8 2.2 24.0

25.0 6.2 1.5 30.4 1.8 40.3 2.0 25.0

26.0 26.3 1.5 37.5 1.7 26.0

27.0 21.5 1.3 34.6 1.5 27.0

28.0 15.2 1.1 31.5 1.3 28.0

29.0 28.0 1.1 29.0

30.0 24.1 0.9 30.0

31.0 19.4 0.8 31.0

32.0 13.1 0.6 32.0

Parts of Line

1 1 1 1 1 1 1 1 Parts of Line

Telescoping Sequence (%) I 0% 33% 67% 100% 100% 100% 100% 100% III 0% 0% 0% 0% 25% 50% 75% 100% IIIII 0% 0% 0% 0% 25% 50% 75% 100% III

Notes:1. Capacities appearing above the bold line are based on structural strength. Capacities appearing below the bold line are based on stability and do not exceed 75% of tipping. 2. During operation the wind speed must not exceed 36 km/hr. 3. An * on the chart indicates positions without rated loads. These areas are susceptible to instability either in the forward direction or the backwards direction. Even without a load, the boom should not be positioned in these specific configurations ofthe load chart to avoid tipping. Warning: All stowed load handling devices are considered loads. See deduction chart for values.

16.3t COUNTERWEIGHT

Page 21: GTC-700EX - Tadano Mantis Cranes · gtc-700ex 70t telesoi boo craler crane specification sheet no. 491-11/13 as please read, understand, and follow the manuals furnished with the

21

GTC-700EX 70t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. 491-11/13 AS

LOAD CHARTS LIFTING CAPACITIES - LOADS IN METRIC TONMANTIS Model GTC-700EX LOAD CHART 34.0m BOOM

TMC# 138731 - 59 - Rev 0 063011

CHARTS #49 & 50 NO TRAVEL – LEVEL 0°TO 2°

9.1m EXTENSION & 6.1m JIB with TRACKS FULLY EXTENDED

15.9t COUNTERWEIGHT 9.1m

EXTENSION 6.1m JIB All Boom Lengths

Jib Offset Angles BoomAngle 0° 15° 30°

BoomAngle

78º8.2 3.0 1.8 1.0

78º

75º6.2 2.9 1.8 1.0

75º

72º5.2 2.5 1.6 0.9

72º

70º4.6 2.3 1.5 0.9

70º

68º4.0 2.1 1.4 0.8

68º

65º3.6 1.9 1.3 0.8

65º

62º3.3 1.8 1.2 0.8

62º

60º3.0 1.6 1.1 0.8

60º

58º2.8 1.5 0.9 0.6

58º

55º2.6 1.2 0.6 0.5

55º

52º2.4 0.9 0.3 *

52º

50º2.3 0.7 * *

50º

48º2.2

48º

45º2.1

45º

Notes: 1. Capacities appearing above the bold line are based on structural strength. Capacities appearing below the

bold line are based on stability and do not exceed 75% of tipping. 2. During operation the wind speed must not exceed 36 km/hr. 3. Never use jib or extension with counterweights installed. 4. An * on the chart indicates positions without rated loads. These areas are susceptible to instability either in

the forward direction or the backwards direction. Even without a load, the boom should not be positioned in these specific configurations of the load chart to avoid tipping. Warning: All stowed load handling devices are considered loads. See deduction chart for values.

16.3t COUNTERWEIGHT

Page 22: GTC-700EX - Tadano Mantis Cranes · gtc-700ex 70t telesoi boo craler crane specification sheet no. 491-11/13 as please read, understand, and follow the manuals furnished with the

22

GTC-700EX 70t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. 491-11/13 AS

LOAD CHARTS LIFTING CAPACITIES - LOADS IN METRIC TONMANTIS Model GTC-700EX LOAD CHART 34.0m BOOM

TMC# 138731 - 60 - Rev 0 063011

CHARTS #51 & 52 TRAVEL SPEEDS UP TO 1.0 km/h – LEVEL 0°TO 2°

9.1m EXTENSION & 6.1m JIB with TRACKS FULLY EXTENDED

15.9t COUNTERWEIGHT 9.1m

EXTENSION 6.1m JIB All Boom Lengths

Jib Offset Angles BoomAngle 0° 15° 30°

BoomAngle

78º8.2 3.0 1.8 1.0

78º

75º6.2 2.9 1.8 1.0

75º

72º5.2 2.5 1.6 0.9

72º

70º4.6 2.3 1.5 0.9

70º

68º4.0 2.1 1.4 0.8

68º

65º3.6 1.9 1.3 0.8

65º

62º3.3 1.8 1.2 0.8

62º

60º3.0 1.6 1.1 0.8

60º

58º2.8 1.5 0.9 0.6

58º

55º2.6 1.2 0.6 0.5

55º

52º2.4 0.9 0.3 *

52º

50º2.3 0.7 * *

50º

48º2.2

48º

45º2.1

45º

Notes: 1. Capacities appearing above the bold line are based on structural strength. Capacities appearing below the

bold line are based on stability and do not exceed 66.6% of tipping. 2. During operation the wind speed must not exceed 36 km/hr. 3. Never use jib or extension with counterweights installed. 4. An * on the chart indicates positions without rated loads. These areas are susceptible to instability either in

the forward direction or the backwards direction. Even without a load, the boom should not be positioned in these specific configurations of the load chart to avoid tipping. Warning: All stowed load handling devices are considered loads. See deduction chart for values.

16.3t COUNTERWEIGHT

Page 23: GTC-700EX - Tadano Mantis Cranes · gtc-700ex 70t telesoi boo craler crane specification sheet no. 491-11/13 as please read, understand, and follow the manuals furnished with the

23

GTC-700EX 70t Telescopic Boom Crawler Crane SPECIFICATION SHEET NO. 491-11/13 AS

LIFTING CAPACITIES - LOADS IN METRIC TON

NOTES:

_______________________________________________________________

_______________________________________________________________

_______________________________________________________________

_______________________________________________________________

_______________________________________________________________

_______________________________________________________________

_______________________________________________________________

_______________________________________________________________

_______________________________________________________________

_______________________________________________________________

_______________________________________________________________

_______________________________________________________________

_______________________________________________________________

_______________________________________________________________

_______________________________________________________________

_______________________________________________________________

_______________________________________________________________

_______________________________________________________________

_______________________________________________________________

_______________________________________________________________

_______________________________________________________________

Page 24: GTC-700EX - Tadano Mantis Cranes · gtc-700ex 70t telesoi boo craler crane specification sheet no. 491-11/13 as please read, understand, and follow the manuals furnished with the

TADA

NO M

ANTI

S COR

PORA

TION

1705

Colu

mbi

a Ave

nue •

Fran

klin

, TN

3706

4 US

A • T

oll-F

ree:

1-80

0-27

2-33

25 •

Fax:

615-

790-

6803

• m

antis

cran

es.co

m

TADANO Ltd.,International Division4-12, Kamezawa 2-chome,Sumida-Ku, Tokyo 130-0014, JapanTel: +81 3 3621 7750Fax: +81 3 3621 7785E-mail: [email protected] SPECIFICATION SHEET NO. 491-11/13 AS