Upload
hadieu
View
246
Download
2
Embed Size (px)
Citation preview
GRILLES AND REGISTERS
G4
GRIL
LES
AN
D R
EGIS
TERS
G
GENERAL PRODUCT OVERVIEW
Models 51DV, 67DV
Models 51SH, 67SV
DOUBLE DEFLECTIONA dual set of individually adjustable blades are friction pivoted and canbe easily adjusted to provide maximum control of the air pattern forspread and deflection in two planes. Blades are spaced on 3/4" (19)centers.Aluminum – Models 51DV, 51DH Page G14Suffix '-O' adds a steel OBDSuffix '-OA' adds an aluminum OBDSteel – Models 61DV, 61DH Page G16Suffix '-O' adds a steel OBDStainless Steel – Models 67DV, 67DH Page G18Suffix '-O' adds a stainless steel OBD
GRILLES AND REGISTERSQuality Assured Products, unobtrusive clean lines for appearance, careful engineering and professional work-manship with the backingof an industry leader – these add up to true value; prime reasons for specifying Nailor Grilles and Registers.
Architectural excellence and engineering selections demand high quality products and shipping schedules demand service; all part ofthe package.
LOUVERED FACE GRILLES AND REGISTERSThis series of grilles and registers are available in cost effective, corrosion-resistant steel, premium quality extruded aluminum or stainlesssteel construction. The blades are formed to a streamlined engineered contoured cross-section. Rigid, reinforced frames feature hairline-mitered corners. Optional opposed blade dampers have a screwdriver slot or lever operator for adjustment through the face of the register.As standard, the grilles and registers have countersunk screw holes in the frame, which make for an architecturally pleasing appearance.
LOUVERED FACE — SUPPLY AIR
• Comprehensive range of models and styles to choose from.
• Versatile selection and sizing ensures the correct product for anyspecific application.
• Material choice of premium quality extruded aluminum, cost-effective steel or stainless steel. Unique in our manufacturingprocess is the exclusive use of corrosion-resistant coated steel asused in the auto industry. The material has superb formingqualities and outlasts painted cold-rolled steel and galvanizedsteel by up to three times.
• Various border/frame types, combinations and mounting options.
• Balancing accessories.
• Superior finishes.
• Performance data in accordance with current international teststandards and the back-up of one of the finest 'in-house' testinglaboratories in North America.
SINGLE DEFLECTIONA single set of individually adjustable blades are friction pivoted and canbe easily adjusted to provide the desired spread or deflection in a singleplane. Blades are spaced on 3/4" (19) centers.Aluminum – Models 51SV, 51SH Page G15Suffix '-O' adds a steel OBDSuffix '-OA' adds an aluminum OBDSteel – Models 61SV, 61SH Page G17Suffix '-O' adds a steel OBDStainless Steel – Models 67SV, 67SH Page G19Suffix '-O' adds a stainless steel OBD
LOUVERED FACE GRILLES AND REGISTERS
G14
GRIL
LES
AN
D R
EGIS
TERS
G
Models 51DV and 51DH Double Deflection Supply Grilles and Registers are recommended for application in systems requiringmaximum flexibility. The front set of blades has the greatest effect on the air pattern and therefore should be selected based onparticular requirements. Vertical front blades will control the spread and throw distance of the air pattern whereas horizontal frontblades will control the rise and drop of the air pattern, typically directing warm air downwards or cool air upwards along the ceiling.
The combination of streamlined ‘teardrop’ shaped blades and 3/4" (19) spacing maintains a high effective free area average capacityof 75%, which minimizes outlet velocity, reduces pressure drop and assures quiet operation.
MODEL 51DV Vertical Front Blades
Model 51DV
Models:51DV and 51DH• Suffix '-O' adds a steel opposed
blade damper• Suffix '-OA' adds an aluminum
opposed blade damper
STANDARD FEATURES:• 1 1/4" (32) wide face border with a 1"(25) overlap margin standard, furnishedwith countersunk screw holes andmounting screws.NF Narrow frame with 1" (25) face borderand a 3/4" (19) overlap margin. O.A.flange to flange dim. = listed size + 1 1/4"(32). Concealed mounting is optional.
• Rigid, heavy gauge extruded frameswith reinforced mitered corners.
• Streamlined shaped extruded bladeson 3/4" (19) centers. Blades positivelyhold deflection setting under all conditionsof velocity and pressure.
• Adjustable air pattern - Blades arefriction pivoted and easily adjusted toprovide desired spread or deflection.
• Available in sizes from 4" x 4" to48" x 48" (102 x 102 to 1219 x 1219)in single section construction. Multiplesection assemblies are available.
CONSTRUCTION MATERIAL:• High quality, extruded aluminumconstruction.
• Steel or aluminum integral dampers areopposed blade design with screwdriverslot operator.
FINISH OPTIONS:• AW Appliance White finish is standard.Other finishes are available.
FASTENING OPTIONS:• Type A Screw Holes (default)• Type C Concealed Mounting Straps• Type D Concealed Screw Holes• Type N None
OPTIONS AND ACCESSORIES:• IS Insect Screen• PF Plaster Frame• GK Foam Gasket• EQT Earthquake TabsFor additional options and accessories,see page G189.
MODEL 51DH Horizontal Front Blades
LIS
TED
SIZE
+ 1
3/4
" (44
) STD
.
LISTED SIZE + 1 3/4" (44) STD.
OPTIONALOPPOSED
BLADE DAMPER
LIS
TED
SIZE
- 1/
4" (6
)
3 9/16" (90)
1 13/16" (46) 1 1/4" (32) FACE
BORDER STANDARD
LISTED SIZE + 1 3/4" (44) STD.
OPTIONALOPPOSED
BLADEDAMPER
LIS
TED
SIZE
- 1/
4" (6
)
3 9/16" (90)
1 13/16" (46)
LIS
TED
SIZE
+ 1
3/4
" (44
) STD
.
1 1/4" (32) FACEBORDER STANDARD
ALUMINUM DOUBLE DEFLECTION GRILLES AND REGISTERS• SUPPLY
LOUVERED FACE GRILLES AND REGISTERS
G15
GRILLES A
ND
REG
ISTERS
G
Models 51SV and 51SH Single Deflection Supply Grilles and Registers are recommended for applications requiring pattern adjustmentin a single horizontal or vertical plane. They are generally used in a high side wall application where vertical blades will control thespread and throw distance of the air pattern to accommodate various layouts. Horizontal blades will control the rise and drop of theair pattern, typically directing warm air downwards or cool air upwards along the ceiling.
The combination of streamlined ‘teardrop’ shaped blades and 3/4" (19) spacing maintains a high effective free area average capacityof 75%, which minimizes outlet velocity, reduces pressure drop and assures quiet operation.
MODEL 51SV Vertical Blades
Model 51SV
Models:51SV and 51SH• Suffix '-O' adds a steel opposed
blade damper• Suffix '-OA' adds an aluminum
opposed blade damper
STANDARD FEATURES:• 1 1/4" (32) wide face border with a 1"(25) overlap margin standard, furnishedwith countersunk screw holes andmounting screws.NF Narrow frame with 1" (25) face borderand a 3/4" (19) overlap margin. O.A.flange to flange dim. = listed size + 1 1/4"(32). Concealed mounting is optional.• Rigid, heavy gauge extruded frameswith reinforced mitered corners.• Streamlined shaped extruded bladeson 3/4" (19) centers. Blades positivelyhold deflection setting under all conditionsof velocity and pressure.
• Adjustable air pattern - Blades arefriction pivoted and easily adjusted toprovide desired spread or deflection.
• Available in sizes from 4" x 4" to48" x 48" (102 x 102 to 1219 x 1219)in single section construction. Multiplesection assemblies are available.
CONSTRUCTION MATERIAL:• High quality, extruded aluminumconstruction.• Steel or aluminum integral dampers areopposed blade design with screwdriverslot operator.
FINISH OPTIONS:• AW Appliance White finish is standard.Other finishes are available.
FASTENING OPTIONS:• Type A Screw Holes (default)
• Type C Concealed Mounting Straps
• Type D Concealed Screw Holes
• Type N None
OPTIONS AND ACCESSORIES:• IS Insect Screen
• PF Plaster Frame
• GK Foam Gasket
• EQT Earthquake Tabs
For additional options and accessories,see page G189.
MODEL 51SH Horizontal Blades
LISTED SIZE + 1 3/4" (44) STD.
OPTIONALOPPOSED
BLADEDAMPER
LIS
TED
SIZE
- 1/
4" (6
)
2 5/8" (67)
7/8" (22)
LIS
TED
SIZE
+ 1
3/4
" (44
) STD
.
1 1/4" (32) FACEBORDER STANDARD
LISTED SIZE + 1 3/4" (44) STD.
OPTIONALOPPOSED
BLADEDAMPER
LIS
TED
SIZE
- 1/
4" (6
)
2 5/8" (67)
7/8" (22)
LIS
TED
SIZE
+ 1
3/4
" (44
) STD
.
1 1/4" (32) FACEBORDER STANDARD
ALUMINUM SINGLE DEFLECTION GRILLES AND REGISTERS• SUPPLY
LOUVERED FACE GRILLES AND REGISTERS
G16
GRIL
LES
AN
D R
EGIS
TERS
G
Models 61DV and 61DH Double Deflection Supply Grilles and Registers are recommended for application in systems requiringmaximum flexibility. The front set of blades has the greatest effect on the air pattern and therefore should be selected based onparticular requirements. Vertical front blades will control the spread and throw distance of the air pattern whereas horizontal frontblades will control the rise and drop of the air pattern, typically directing warm air downwards or cool air upwards along the ceiling.
The combination of streamlined ‘teardrop’ shaped blades and 3/4" (19) spacing maintains a high effective free area average capacityof 75%, which minimizes outlet velocity, reduces pressure drop and assures quiet operation.
MODEL 61DV Vertical Front Blades
Model 61DV
Models:61DV and 61DH• Suffix '-O' adds a steel opposed blade damper
STANDARD FEATURES:• 1 1/4" (32) wide face border with a 1"(25) overlap margin standard, furnishedwith countersunk screw holes andmounting screws. Concealed mountingis optional.
• Rigid, roll-formed frames with reinforcedmitered corners.
• Streamlined shaped roll-formed bladeson 3/4" (19) centers. Blades positivelyhold deflection setting under all conditionsof velocity and pressure.
• Adjustable air pattern - Blades arefriction pivoted and easily adjusted toprovide desired spread or deflection.
• Available in sizes from 4" x 4" to 48" x 36" (102 x 102 to 1219 x 914) in single section construction. Multiplesection assemblies are available.
CONSTRUCTION MATERIAL:• Cost effective, corrosion-resistant steelconstruction.
• Integral dampers - roll-formed steelblades. Opposed blade design withscrewdriver slot operator.
FINISH OPTIONS:• AW Appliance White finish is standard.Other finishes are available.
FASTENING OPTIONS:• Type A Screw Holes (default)
• Type C Concealed Mounting Straps
• Type D Concealed Screw Holes
• Type N None
OPTIONS AND ACCESSORIES:• IS Insect Screen
• PF Plaster Frame
• GK Foam Gasket
• EQT Earthquake Tabs
For additional options and accessories,see page G189.
MODEL 61DH Horizontal Front Blades
LIS
TED
SIZE
+ 1
3/4
" (44
) STD
.
LISTED SIZE + 1 3/4" (44) STD.
OPTIONALOPPOSED
BLADE DAMPER
LIS
TED
SIZE
- 1/
4" (6
)
3 9/16" (90)
1 13/16" (46) 1 1/4" (32) FACE
BORDER STANDARD
LISTED SIZE + 1 3/4" (44)
OPTIONALOPPOSED
BLADEDAMPER
LIS
TED
SIZE
- 1/
4" (6
)
3 9/16" (90)
1 13/16" (46)
LIS
TED
SIZ
E +
1 3/
4" (4
4)
1 1/4" (32) FACEBORDER
STEEL DOUBLE DEFLECTION GRILLES AND REGISTERS• SUPPLY
LOUVERED FACE GRILLES AND REGISTERS
G17
GRILLES A
ND
REG
ISTERS
G
Models 61SV and 61SH Single Deflection Supply Grilles and Registers are recommended for applications requiring pattern adjustmentin a single horizontal or vertical plane. They are generally used in a high side wall application where vertical blades will control thespread and throw distance of the air pattern to accommodate various layouts. Horizontal blades will control the rise and drop of theair pattern, typically directing warm air downwards or cool air upwards along the ceiling.
The combination of streamlined ‘teardrop’ shaped blades and 3/4" (19) spacing maintains a high effective free area average capacityof 75%, which minimizes outlet velocity, reduces pressure drop and assures quiet operation.
MODEL 61SV Vertical Blades
Model 61SV
Models:61SV and 61SH• Suffix '-O' adds a steel opposed blade damper
STANDARD FEATURES:• 1 1/4" (32) wide face border with a 1"(25) overlap margin standard, furnishedwith countersunk screw holes andmounting screws. Concealed mountingis optional.
• Rigid, roll-formed frames with reinforcedmitered corners.
• Streamlined shaped roll-formed bladeson 3/4" (19) centers. Blades positivelyhold deflection setting under all conditionsof velocity and pressure.
• Adjustable air pattern - Blades arefriction pivoted and easily adjusted toprovide desired spread or deflection.
• Available in sizes from 4" x 4" to 48" x 36" (102 x 102 to 1219 x 914) in single section construction. Multiplesection assemblies are available.
CONSTRUCTION MATERIAL:• Cost effective, corrosion-resistant steelconstruction.
• Integral dampers - roll-formed steelblades. Opposed blade design withscrewdriver slot operator.
FINISH OPTIONS:• AW Appliance White finish is standard.Other finishes are available.
FASTENING OPTIONS:• Type A Screw Holes (default)
• Type C Concealed Mounting Straps
• Type D Concealed Screw Holes
• Type N None
OPTIONS AND ACCESSORIES:• IS Insect Screen
• PF Plaster Frame
• GK Foam Gasket
• EQT Earthquake Tabs
For additional options and accessories,see page G189.
MODEL 61SH Horizontal Blades
LISTED SIZE + 1 3/4" (44)
OPTIONALOPPOSED
BLADEDAMPER
LIS
TED
SIZE
- 1/
4" (6
)
2 5/8" (67)
7/8" (22)
LIS
TED
SIZ
E +
1 3/
4" (4
4)
1 1/4" (32) FACEBORDER
LISTED SIZE + 1 3/4" (44)
OPTIONALOPPOSED
BLADEDAMPER
LIS
TED
SIZE
- 1/
4" (6
)
2 5/8" (67)
7/8" (22)
LIS
TED
SIZ
E +
1 3/
4" (4
4)
1 1/4" (32) FACEBORDER
STEEL SINGLE DEFLECTION GRILLES AND REGISTERS• SUPPLY
LOUVERED FACE GRILLES AND REGISTERS
G18
GRIL
LES
AN
D R
EGIS
TERS
G
Models 67DV and 67DH Double Deflection Supply Grilles and Registers are recommended for application in systems requiringmaximum flexibility. The front set of blades has the greatest effect on the air pattern and therefore should be selected based onparticular requirements. Vertical front blades will control the spread and throw distance of the air pattern whereas horizontal frontblades will control the rise and drop of the air pattern, typically directing warm air downwards or cool air upwards along the ceiling.
Stainless steel grilles and registers are well suited for applications involving corrosive environments, high humidity or frequent cleaningwith strong chemicals. Typical projects include hospitals, clean rooms, laboratories, industrial and manufacturing facilities.
The combination of streamlined shaped blades and 3/4" (19) spacing maintains a high effective free area average capacity of 75%,which minimizes outlet velocity, reduces pressure drop and assures quiet operation.
MODEL 67DV Vertical Front Blades
Model 67DV
Models:67DV and 67DH• Suffix '-O' adds a stainless steel
opposed blade damper
STANDARD FEATURES:• 1 3/8" (35) wide face border with a 1"(25) overlap margin standard, furnishedwith Type A countersunk screw holes andstainless steel mounting screws.
• Rigid, welded and reinforced frameswith hairline mitered corners.
• Streamlined shaped roll-formed bladeson 3/4" (19) centers. Blades positivelyhold deflection setting under all conditionsof velocity and pressure.
• Adjustable air pattern - Blades arefriction pivoted and easily adjusted toprovide desired spread or deflection.
• Available in sizes from 4" x 4" to48" x 48" (102 x 102 to 1219 x 1219).
CONSTRUCTION MATERIAL:• Type 304 Stainless Steel construction.
• Integral dampers - roll-formed stainlesssteel blades. Opposed blade design witha screwdriver operator.
FINISH OPTIONS:• #4 Brushed Satin Polished finish isstandard. AW Appliance White finish isoptional.
OPTIONS AND ACCESSORIES:• Type 316 Stainless Steel Construction
• PFS Stainless Steel Plaster Frame
For additional options and accessories,see page G189.
MODEL 67DH Horizontal Front Blades
LISTED SIZE + 1 5/8" (41)
LIS
TED
SIZ
E +
1 5/
8" (4
1)
1 3/8" (35) FACE BORDER 1 3/4" (44)
3 5/8" (92)
LIS
TED
SIZ
E - 1
/4" (
6)
OPT.O.B.D.
LISTED SIZE + 1 5/8" (41)
LIS
TED
SIZ
E +
1 5/
8" (4
1)
1 3/8" (35) FACE BORDER 1 3/4" (44)
3 5/8" (92)
LIS
TED
SIZ
E - 1
/4" (
6)
OPT.O.B.D.
STAINLESS STEEL DOUBLE DEFLECTION GRILLES AND REGISTERS• SUPPLY
LOUVERED FACE GRILLES AND REGISTERS
G19
GRILLES A
ND
REG
ISTERS
G
MODEL 67SV Vertical Blades
Model 67SV
Models:67SV and 67SH• Suffix '-O' adds a stainless steel
opposed blade damper
STANDARD FEATURES:• 1 3/8" (35) wide face border with a 1"(25) overlap margin standard, furnishedwith Type A countersunk screw holes andstainless steel mounting screws.
• Rigid, welded and reinforced frameswith hairline mitered corners.
• Streamlined shaped roll-formed bladeson 3/4" (19) centers. Blades positivelyhold deflection setting under all conditionsof velocity and pressure.
• Adjustable air pattern - Blades arefriction pivoted and easily adjusted toprovide desired spread or deflection.
• Available in sizes from 4" x 4" to60" x 48" (102 x 102 to 1524 x 1219).
CONSTRUCTION MATERIAL:• Type 304 Stainless Steel construction.
• Integral dampers - roll-formed stainlesssteel blades. Opposed blade design witha screwdriver operator.
FINISH OPTIONS:• #4 Brushed Satin Polished finish isstandard. AW Appliance White finish isoptional.
OPTIONS AND ACCESSORIES:• Type 316 Stainless Steel Construction
• PFS Stainless Steel Plaster Frame
For additional options and accessories,see page G189.
MODEL 67SH Horizontal Blades
LISTED SIZE + 1 5/8" (41)
LIS
TED
SIZ
E +
1 5/
8" (4
1)
1 3/8" (35) FACE BORDER
LIS
TED
SIZ
E - 1
/4" (
6)
1 1/8" (29)
OPT.O.B.D.
2 7/8"(73)
LISTED SIZE + 1 5/8" (41)
LIS
TED
SIZ
E +
1 5/
8" (4
1)
1 3/8" (35) FACE BORDER
LIS
TED
SIZ
E - 1
/4" (
6)
1 1/8" (29)
OPT.O.B.D.
2 7/8"(73)
Models 67SV and 67SH Single Deflection Supply Grilles and Registers are recommended for applications requiring pattern adjustmentin a single horizontal or vertical plane. They are generally used in a high side wall application where vertical blades will control thespread and throw distance of the air pattern to accommodate various layouts. Horizontal blades will control the rise and drop of theair pattern, typically directing warm air downwards or cool air upwards along the ceiling.
Stainless steel grilles and registers are well suited for applications involving corrosive environments, high humidity or frequent cleaningwith strong chemicals. Typical projects include hospitals, clean rooms, laboratories, industrial and manufacturing facilities.
The combination of streamlined shaped blades and 3/4" (19) spacing maintains a high effective free area average capacity of 75%,which minimizes outlet velocity, reduces pressure drop and assures quiet operation.
STAINLESS STEEL SINGLE DEFLECTION GRILLES AND REGISTERS• SUPPLY
LOUVERED FACE GRILLES AND REGISTERS
G20
GRIL
LES
AN
D R
EGIS
TERS
G
PERFORMANCE NOTES FOR SUPPLY GRILLES AND REGISTERS:
MODEL SERIES: 5100, 6100 AND 6700
Throw, Spread and Drop The isovel diagrams shown below, illustrate in plan view, therelationship of horizontal spread to throw for three standardvertical blade deflections and represent a typical high side wallsupply outlet. The isovels (throw values) are for the catalogedterminal velocities of 150, 100 and 50 fpm. Cataloged data, in accordance with the test code, is with the grillemounted 9" (229) below the ceiling and benefiting from the ceilingcoanda effect under isothermal conditions. Throw values withoutceiling effect (greater than 24" (610) from a surface parallel to theairflow) may be approximated by multiplying the cataloged throwby x 0.7. In order to offset potential draft problems caused by prematuredrop, it is recommended to set the blades with an upwarddeflection setting of 15 – 20° in free space conditions. The angleof spread and temperature differential between the supply air androom air ( T) also effects the drop of the airstream.
Under constant conditions of temperature, volume and corevelocity, the wider the spread, the smaller the drop. Typical coldsupply air (20°F T) reduces horizontal throw by approximately30%. Warm air will increase throw by approximately 30% andreduce drop. For a full explanation of the effects of spread, throw, temperatureand drop, refer to the engineering guide at the back of the catalog.
SPREAD CHARACTERISTICS WITH THREE DEFLECTIONSETTINGS
NC Corrections for Throttling Damper (add)
Blade Deflection 0° 22 1/2° 45°
Double Deflection Factor x .80 x .83 x .89
Single Deflection Factor x .73 x .76 x .85
TP Correction Factors for Grilles Without Damper(multiply)
ModelType
DamperBlade Deflection
0° 22 1/2° 45°
DoubleDeflection
With 0 + 2 + 7
Without – 4 – 2 + 3
SingleDeflection
With – 4 – 1 + 4
Without – 8 – 6 + 1
NC Corrections for Blade Deflection (add)
Additional Pressure Drop(in. w.g.)
.05" .15" .25"
Approx. Damper Opening 75% 67% 50%
NC add + 6 + 11 + 18
5
10
0
5
100 5 10 15 20 25 35 40 45 50 55 6030
5
10
0
5
100 5 10 15 20 25 35 40 45 5030
0 5 10 15 20 25 30
10
5
0
5
10
15
20
15
20
Throw (ft.)
Throw (ft.)
Throw (ft.)
Sp
read
(ft
.)S
pre
ad (
ft.)
Sp
read
(ft
.)
22 1/2 Deflection
0 Deflection
45 Deflection
Vt = 50 fpm
Vt = 100 fpmVt = 150 fpm
Vt = 50 fpm
Vt = 100 fpmVt = 150 fpm
Vt = 50 fpm
Vt = 100 fpm
Vt = 150 fpm
Note: Damper corrections are for wide open damper.
LOUVERED FACE GRILLES AND REGISTERS
G21
GRILLES A
ND
REG
ISTERS
G
PERFORMANCE DATA: SUPPLY GRILLES AND REGISTERS • 5100, 6100 AND 6700 SERIES
MODELS: 51DV, 51DH, 51SV, 51SH, 61DV, 61DH, 61SV, 61SH, 67DV, 67DH, 67SV, 67SH
ListedDuct Size(inches)
AlternateSizes
(inches)
CoreArea
(sq. ft.)
AkFactor
CoreVP
300.006
400.010
500.016
600.022
700.031
800.040
1000.062
1200.090
1400.122
TP0°22 1/2°45°
.015
.017
.026
.026
.030
.046
.041
.047
.072
.059
.068
.103
.081
.093
.142
.106
.122
.186
.165
.190
.289
.238
.274
.417
.324
.373
.567
6 x 6 8 x 410 x 4 0.20
CFMNC
60–
80–
100–
12014
14019
16023
20029
24035
28040
.14
.12
.10T
0°22 1/2°45°
5-7-134-6-103-4-7
7-9-166-7-134-5-8
8-12-186-10-14
4-6-9
10-14-208-11-165-7-10
11-15-219-12-176-8-11
12-16-2310-13-18
6-8-12
15-18-2512-14-20
8-9-13
16-20-2713-16-228-10-14
17-21-3014-17-249-11-15
8 x 6 10 x 512 x 4 0.27
CFMNC
81–
108–
135–
16215
18920
21624
27030
32436
37841
.18
.16
.14T
0°22 1/2°45°
5-8-154-6-123-4-8
8-12-186-10-14
4-6-9
10-14-208-11-165-7-10
11-16-239-13-186-8-12
13-18-2510-14-20
7-9-13
15-19-2712-15-228-10-14
17-21-3014-17-249-11-15
18-23-3214-18-269-12-16
19-24-3515-19-2810-12-18
10 x 6 12 x 516 x 4 0.35
CFMNC
105–
140–
17511
21016
24521
28025
35031
42037
49042
.24
.21
.18T
0°22 1/2°45°
6-9-185-7-143-5-9
9-13-217-10-175-7-11
10-16-248-13-195-8-12
12-19-2610-15-216-10-13
15-20-2812-16-228-10-14
17-21-3014-17-249-11-15
20-23-3316-18-2610-12-17
21-25-3617-20-2911-13-18
22-27-3918-22-3111-14-20
8 x 8 14 x 5 0.38
CFMNC
114–
152–
19012
22817
26622
30426
38032
45638
53243
.26
.22
.20T
0°22 1/2°45°
6-9-195-7-153-5-10
9-14-227-11-185-7-11
11-16-259-13-206-8-13
13-19-2710-15-227-10-14
16-21-2913-17-238-11-15
18-22-3214-18-269-11-16
19-24-3415-19-2710-12-17
21-26-3717-21-3011-13-19
23-28-4018-22-3212-14-20
12 x 6 18 x 4 0.42
CFMNC
126–
168–
21012
25217
29422
33626
42032
50438
58843
.29
.25
.22T
0°22 1/2°45°
6-9-195-7-153-5-10
9-14-227-11-185-7-11
11-16-259-13-206-8-13
13-19-2710-15-227-10-14
16-21-3013-17-248-11-15
18-22-3214-18-269-11-16
19-24-3415-19-2710-12-17
21-28-3817-22-3011-14-19
23-29-4118-23-3312-15-21
14 x 6 10 x 8 0.50
CFMNC
150–
200–
25013
30018
35023
40027
50033
60039
70044
.34
.30
.26T
0°22 1/2°45°
6-11-205-9-163-6-10
10-15-238-12-185-8-12
12-18-2510-14-20
6-9-13
15-20-2812-16-228-10-14
16-22-3113-18-258-11-16
19-23-3315-18-2610-12-17
21-25-3617-20-2911-13-18
23-28-4018-22-3212-14-20
25-31-4320-25-3413-16-22
12 x 8 16 x 624 x 4 0.58
CFMNC
174–
232–
29014
34819
40624
46428
58034
69640
81245
.39
.34
.30T
0°22 1/2°45°
7-11-216-9-174-6-11
10-15-248-12-195-8-12
12-19-2710-15-226-10-14
15-21-3012-17-248-11-15
17-23-3214-18-269-12-16
20-24-3416-19-2710-12-17
22-27-3818-22-3011-14-19
24-30-4219-24-3412-15-21
26-32-4521-26-3613-16-23
10 x 10 14 x 726 x 4 0.61
CFMNC
183–
244–
30514
36619
42724
48828
61034
73240
85445
.41
.36
.31T
0°22 1/2°45°
7-11-216-9-174-6-11
10-16-248-13-195-8-12
13-19-2810-15-227-10-14
16-21-3013-17-248-11-15
17-23-3214-18-269-12-16
20-24-3516-19-2810-12-18
23-28-3918-22-3112-14-20
24-30-4219-24-3412-15-22
27-32-4622-26-3714-16-23
18 x 614 x 828 x 430 x 4
0.65
CFMNC
195–
260–
32515
39020
45525
52029
65035
78041
91046
.44
.38
.33T
0°22 1/2°45°
7-12-226-10-184-6-11
11-16-259-13-206-8-13
13-20-2910-16-237-10-15
16-22-3213-18-268-11-16
18-24-3414-19-279-12-17
21-25-3617-20-2911-13-18
24-29-4019-23-3212-15-20
25-32-4520-26-3613-16-23
28-34-4822-27-3814-17-24
12 x 10 20 x 624 x 5 0.74
CFMNC
222–
296–
37015
44420
51825
59229
74035
88841
103646
.50
.44
.38T
0°22 1/2°45°
8-13-246-10-194-7-12
11-17-279-14-226-9-14
14-21-3111-17-257-11-16
17-24-3314-19-269-12-17
20-26-3616-21-2910-13-18
22-27-3918-22-3111-14-20
25-31-4320-25-3413-16-22
27-33-4822-26-3814-17-24
30-36-5124-29-4115-18-26
22 x 616 x 828 x 536 x 4
0.80
CFMNC
240–
320–
40016
48021
56026
64030
80036
96042
112047
.54
.47
.41T
0°22 1/2°45°
8-13-256-10-204-7-13
11-18-289-14-226-9-14
15-22-3212-18-268-11-16
18-25-3514-20-289-13-18
20-27-3816-22-3010-14-19
23-28-4118-22-3312-14-21
26-32-4521-26-3613-16-23
28-35-5022-28-4014-18-25
31-38-5325-30-4216-19-27
12 x 12
14 x 1018 x 824 x 638 x 4
0.90
CFMNC
270–
360–
45016
54021
63026
72030
90036
108042
126047
.61
.53
.46T
0°22 1/2°45°
9-14-267-11-215-7-13
12-18-2910-14-23
6-9-15
15-23-3312-18-268-12-17
18-26-3614-21-299-13-18
21-27-3917-22-3111-14-20
24-29-4219-23-3412-15-21
27-33-4722-26-3814-17-24
29-36-5123-29-4115-18-26
32-39-5626-31-4516-20-28
18 x 10 30 x 6 1.13
CFMNC
339–
45210
56517
67822
79127
90431
113037
135643
158248
.77
.67
.58T
0°22 1/2°45°
9-15-297-12-235-8-15
14-20-3311-16-267-10-17
17-25-3614-20-299-13-18
20-29-4016-23-3210-15-20
24-30-4319-24-3412-15-22
27-33-4622-26-3714-17-23
30-36-5124-29-4115-18-26
33-40-5726-32-4617-20-29
35-43-6128-34-4918-22-31
For performance data notes, see G24.
LOUVERED FACE GRILLES AND REGISTERS
G22
GRIL
LES
AN
D R
EGIS
TERS
G
PERFORMANCE DATA: SUPPLY GRILLES AND REGISTERS • 5100, 6100 AND 6700 SERIES
MODELS: 51DV, 51DH, 51SV, 51SH, 61DV, 61DH, 61SV, 61SH, 67DV, 67DH, 67SV, 67SH
ListedDuct Size(inches)
AlternateSizes
(inches)
CoreArea
(sq. ft.)
AkFactor
CoreVP
300.006
400.010
500.016
600.022
700.031
800.040
1000.062
1200.090
1400.122
TP0°22 1/2°45°
.015
.017
.026
.026
.030
.046
.041
.047
.072
.059
.068
.103
.081
.093
.142
.106
.122
.186
.165
.190
.289
.238
.274
.417
.324
.373
.567
14 x 14
16 x 1220 x 1024 x 834 x 6
1.24
CFMNC
372–
49610
62017
74422
86827
99231
124037
148843
173648
.84
.73
.64T
0°22 1/2°45°
11-18-339-14-266-9-17
16-25-3913-20-318-13-20
20-29-4216-23-3410-15-21
24-33-4719-26-3812-17-24
27-36-5122-29-4114-18-26
31-39-5425-31-4316-20-27
35-42-6028-34-4818-21-30
39-47-6631-38-5320-24-33
41-51-7133-41-5721-26-36
18 x 12
16 x 1422 x 1028 x 838 x 6
1.37
CFMNC
411–
54811
68518
82223
95928
109632
137038
164444
191849
.93
.81
.71T
0°22 1/2°45°
11-18-339-14-266-9-17
16-25-3913-20-318-13-20
20-30-4316-24-3410-15-22
24-33-4719-26-3812-17-24
28-36-5122-29-4114-18-26
32-39-5426-31-4316-20-27
35-43-6128-34-4918-22-31
39-47-6731-38-5420-24-34
41-51-7233-41-5821-26-36
24 x 10 20 x 1230 x 8 1.52
CFMNC
456–
60811
76018
91223
106428
121632
152038
182444
212849
1.03.90.78
T0°22 1/2°45°
12-19-3510-15-286-10-18
16-25-4113-20-338-13-21
21-32-4517-26-3611-16-23
25-35-5020-28-4013-18-25
29-38-5323-30-4215-19-27
34-41-5727-33-4617-21-29
37-45-6530-36-5119-23-32
41-50-7033-40-5621-25-35
43-53-7634-42-6122-27-38
16 x 1618 x 1422 x 1230 x 8
1.64
CFMNC
492–
65611
82018
98423
114828
131232
164038
196844
229649
1.12.97.84
T0°22 1/2°45°
12-20-3710-16-306-10-19
17-26-4214-21-349-13-21
22-32-4718-26-3811-16-24
26-37-5121-30-4113-19-26
31-40-5625-32-4516-20-28
35-42-5928-34-4718-21-30
39-47-6731-38-5420-24-34
42-51-7334-41-5821-26-37
46-56-7937-45-6323-28-40
24 x 12
18 x 1620 x 1430 x 1036 x 8
1.85
CFMNC
555–
74012
92519
111024
129529
148033
185039
222045
259050
1.261.09.95
T0°22 1/2°45°
12-20-3810-16-306-10-19
18-27-4414-22-359-14-22
22-33-4818-26-3811-17-24
27-38-5422-30-4314-19-27
32-40-5826-32-4616-20-29
36-44-6229-35-5018-22-31
40-48-6932-38-5520-24-35
44-54-7635-43-6122-27-38
48-58-8238-46-6624-29-41
18 x 18
20 x 1624 x 1428 x 1232 x 10
2.10
CFMNC
630–
84012
105019
126024
147029
168033
210039
252045
294050
1.431.241.08
T0°22 1/2°45°
13-21-4010-17-327-11-20
19-29-4715-23-3810-15-24
24-36-5219-29-4212-18-26
29-40-5723-32-4615-20-29
33-43-6226-34-5017-22-31
38-47-6630-38-5319-24-33
42-52-7434-42-5921-26-37
47-57-8138-46-6524-29-41
50-62-8740-50-7025-31-44
30 x 12
20 x 1822 x 1626 x 1436 x 10
2.32
CFMNC
696–
92813
116020
139225
162430
185634
232040
278446
324851
1.581.371.19
T0°22 1/2°45°
14-23-4311-18-347-12-22
21-31-5017-25-4011-16-25
26-39-5621-31-4513-20-28
31-43-6125-34-4916-22-31
36-47-6729-38-5418-24-34
41-50-7133-40-5721-25-36
46-56-7932-45-6323-28-40
50-61-8640-49-6925-31-43
54-67-9443-54-7527-34-47
24 x 16 32 x 12 2.50
CFMNC
750–
100013
125020
150025
175030
200034
250040
300046
350051
1.701.481.29
T0°22 1/2°45°
14-24-4511-19-367-12-23
22-32-5218-26-4211-16-26
27-40-5822-32-4614-20-29
32-45-6426-36-5116-23-32
37-49-6830-39-5419-25-34
43-52-7434-42-5922-26-37
48-58-8238-46-6624-29-41
52-64-9042-51-7226-32-45
56-68-9745-54-7828-34-49
20 x 20 22 x 18 2.61
CFMNC
783–
104413
130520
156625
182730
208834
261040
313246
365451
1.771.541.34
T0°22 1/2°45°
15-24-4612-19-378-12-23
22-32-5318-26-4211-16-27
27-41-5922-33-4714-21-30
32-46-6526-37-5216-23-33
38-50-7030-40-5619-25-35
44-53-7535-42-6022-27-38
49-59-8439-47-6725-30-42
53-65-9242-52-7427-33-46
58-70-9946-56-7929-35-50
36 x 12
22 x 2024 x 1826 x 1630 x 14
2.79
CFMNC
837–
111613
139520
167425
195330
223234
279040
334846
390651
1.901.651.44
T0°22 1/2°45°
15-25-4812-20-388-13-24
23-34-5518-27-4412-17-28
28-42-6122-34-4914-21-31
34-48-6827-38-5417-24-34
40-51-7332-41-5820-26-37
45-55-7736-44-6223-28-39
50-61-8640-49-6925-31-43
55-68-9544-54-7628-34-48
59-73-10347-58-8230-37-52
22 x 22
24 x 2026 x 1830 x 1640 x 12
3.17
CFMNC
951–
126814
158521
190226
221931
253635
317041
380447
443852
2.161.871.63
T0°22 1/2°45°
17-27-5014-22-409-14-25
24-36-5819-29-4612-18-29
29-45-6523-36-5215-23-33
36-50-7129-40-5718-25-36
42-54-7734-43-6221-27-39
47-58-8238-46-6624-29-41
53-65-9242-52-7427-33-46
58-71-10146-57-8129-36-51
62-77-10950-62-8731-39-55
42 x 12 36 x 14 3.27
CFMNC
981–
130814
163521
196226
228931
261635
327041
392447
457852
2.221.931.68
T0°22 1/2°45°
17-27-5114-22-419-14-26
24-36-5919-29-4712-18-30
30-45-6624-36-5315-23-33
36-51-7229-41-5818-26-36
42-55-7734-44-6221-28-39
48-59-8338-47-6624-30-42
53-66-9342-53-7427-33-47
59-72-10147-58-8130-36-51
63-77-10950-62-8732-39-55
30 x 1824 x 2234 x 1640 x 14
3.54
CFMNC
1062–
141614
177021
212426
247831
283235
354041
424847
495652
2.412.091.82
T0°22 1/2°45°
18-28-5314-22-429-14-27
25-37-6120-30-4913-19-31
31-47-6925-38-5516-24-35
37-53-7530-42-6019-27-38
44-57-8135-46-6522-29-41
50-61-8640-49-6925-31-43
56-69-9745-55-7828-35-49
61-75-10649-60-8531-38-53
66-81-11553-65-9233-41-58
For performance data notes, see G24.
LOUVERED FACE GRILLES AND REGISTERS
G23
GRILLES A
ND
REG
ISTERS
G
PERFORMANCE DATA: SUPPLY GRILLES AND REGISTERS • 5100, 6100 AND 6700 SERIES
MODELS: 51DV, 51DH, 51SV, 51SH, 61DV, 61DH, 61SV, 61SH, 67DV, 67DH, 67SV, 67SH
ListedDuct Size(inches)
AlternateSizes
(inches)
CoreArea
(sq. ft.)
AkFactor
CoreVP
300.006
400.010
500.016
600.022
700.031
800.040
1000.062
1200.090
1400.122
TP0°22 1/2°45°
.015
.017
.026
.026
.030
.046
.041
.047
.072
.059
.068
.103
.081
.093
.142
.106
.122
.186
.165
.190
.289
.238
.274
.417
.324
.373
.567
24 x 24
26 x 2228 x 2032 x 1836 x 16
3.79
CFMNC
1137–
151614
189521
227426
265331
303235
379041
454847
530652
2.582.241.95
T0°22 1/2°45°
18-29-5514-23-449-15-28
29-36-6221-31-5013-20-31
33-48-7026-38-5617-24-35
39-55-7731-44-6220-28-39
45-59-8336-47-6623-30-42
51-62-8941-50-7126-31-45
57-70-9946-56-7929-35-50
62-77-10850-62-8631-39-54
68-83-11754-66-9434-42-59
36 x 1832 x 2040 x 1646 x 14
4.29
CFMNC
1287–
171615
214522
257427
300332
343236
429042
514848
600653
T0°22 1/2°45°
19-31-5815-25-4610-16-29
28-42-6822-34-5414-21-34
35-52-7528-42-6018-26-38
2-58-8334-46-6621-29-42
48-63-8938-50-7124-32-45
55-68-9544-54-7628-34-48
61-75-10649-60-8531-38-53
68-83-11754-66-9434-42-59
73-89-12558-71-10037-45-63
26 x 26 28 x 2448 x 14 4.47
CFMNC
1341–
178815
223522
268227
312932
357636
447042
536448
625853
3.042.642.30
T0°22 1/2°45°
19-32-5915-26-4710-16-30
28-43-6922-34-5514-22-35
35-53-7728-42-6218-27-32
43-59-8534-47-6822-30-43
49-65-9139-52-7325-33-46
56-69-9845-55-7828-35-49
63-77-10950-62-8732-39-55
69-85-12055-68-9635-43-60
75-91-12960-73-10338-46-65
30 x 2432 x 2236 x 2040 x 18
4.77
CFMNC
1431–
190815
238522
286227
333932
381636
477042
572448
667853
3.242.812.46
T0°22 1/2°45°
20-33-6116-26-4910-17-31
29-44-7123-35-5715-22-36
36-54-7929-43-6318-27-40
44-61-8735-49-7022-31-44
51-67-9441-54-7526-34-47
58-71-10146-57-8129-36-51
65-79-11252-63-9033-40-56
71-87-12357-70-9836-44-62
77-94-13362-75-10639-47-67
42 x 18 28 x 26 4.99
CFMNC
1497–
199716
249523
299428
349333
399237
499043
598849
698654
3.392.942.57
T0°22 1/2°45°
20-33-6216-26-5010-17-31
30-44-7224-35-5815-22-36
37-55-8030-44-6419-28-40
44-62-8835-50-7022-31-44
52-67-9542-54-7626-34-48
59-72-10247-58-8230-36-51
66-80-11453-64-9133-40-57
72-88-12558-70-10036-44-63
77-95-13562-76-10839-48-68
28 x 2830 x 2636 x 2240 x 20
5.20
CFMNC
1560–
208016
260023
312028
364033
416037
520043
624049
728054
3.543.072.68
T0°22 1/2°45°
21-34-6317-27-5011-17-32
30-45-7424-36-5915-23-37
38-56-8230-45-6619-28-41
45-63-9036-50-7223-32-45
53-69-9742-55-7827-35-49
60-74-10448-59-8330-37-52
67-82-11654-66-9334-41-58
74-90-12859-72-10237-45-64
79-97-13763-78-11040-49-69
42 x 20 30 x 28 5.57
CFMNC
1671–
222816
278523
334228
389933
445637
557043
668449
779854
3.793.292.87
T0°22 1/2°45°
22-35-6618-28-5311-18-33
31-47-7625-38-6116-24-38
39-58-8431-46-6720-29-42
47-66-9338-53-7424-33-47
55-71-10044-57-8028-36-50
62-76-10750-61-8631-38-54
70-84-12056-67-9635-42-60
76-93-13161-74-10538-47-66
82-100-14266-80-11441-50-71
36 x 24 40 x 2244 x 20 5.74
CFMNC
1722–
229616
287023
344428
401833
459237
574043
688849
803654
3.903.392.96
T0°22 1/2°45°
23-36-6818-29-5412-18-34
32-49-7826-39-6216-25-39
41-60-8833-48-7021-30-44
49-68-9639-54-7725-34-48
57-74-10446-59-8329-37-52
64-78-11251-62-9032-39-56
72-88-12458-70-9936-44-62
78-96-13762-77-11039-48-69
85-104-14868-83-11843-52-74
30 x 3034 x 2638 x 2448 x 20
5.99
CFMNC
1797–
239616
299523
359428
419333
479237
599043
718849
838654
4.073.533.08
T0°22 1/2°45°
23-36-6918-29-5512-18-35
33-49-8026-39-6417-25-40
41-61-8933-49-7121-31-45
49-69-9839-55-7825-35-49
57-75-10646-60-8529-38-53
65-80-11352-64-9033-40-57
73-89-12658-71-10137-45-63
80-98-13864-78-11040-49-69
86-106-15069-85-12043-53-75
42 x 2436 x 2842 x 2446 x 22
6.72
CFMNC
2016–
268817
336024
403229
470434
537638
672044
806450
940855
4.573.963.46
T0°22 1/2°45°
24-39-7219-31-5812-20-36
34-51-8427-41-6717-26-42
43-64-9334-51-7422-32-47
51-72-10241-58-8226-36-51
60-78-11148-62-8930-39-56
68-84-11854-67-9434-42-59
77-93-13262-74-10639-47-66
84-102-14467-82-11542-51-72
90-111-15772-89-12645-56-79
32 x 32 40 x 26 6.84
CFMNC
2052–
273617
342024
410429
478834
547238
684044
820850
957655
4.654.043.52
T0°22 1/2°45°
24-39-7319-31-5812-20-37
34-52-8427-42-6717-26-42
43-65-9434-52-7522-33-47
52-73-10342-58-8226-37-52
61-79-11249-63-9031-40-56
69-84-11955-67-9535-42-60
77-94-13362-75-10639-47-67
84-103-14667-82-11742-52-73
91-112-15873-90-126
46-56-79
36 x 30 38 x 28 7.22
CFMNC
2166–
288817
361024
433229
505434
577638
722044
866450
1010855
4.914.263.72
T0°22 1/2°45°
25-40-7620-32-6113-20-38
36-54-8729-43-7018-27-44
45-68-9836-54-7823-34-49
54-76-10843-61-8627-38-54
63-82-11650-66-9332-41-58
71-87-12457-70-9936-44-62
80-98-13964-78-11140-49-70
87-108-15170-86-12144-54-76
94-116-16475-93-13147-58-82
48 x 24
34 x 3436 x 3238 x 3042 x 28
7.69
CFMNC
2307–
307618
384525
461430
538335
615239
769045
922851
1076656
5.234.543.96
T0°22 1/2°45°
26-41-7721-33-6213-22-39
37-55-9030-44-7219-28-45
46-69-10037-55-8023-45-50
55-77-10944-62-8728-39-55
64-84-11851-67-9432-42-59
73-90-12758-72-10237-45-64
82-100-14266-80-11441-50-71
90-109-15572-87-12445-55-78
97-118-16778-94-13449-59-84
For performance data notes, see G24.
LOUVERED FACE GRILLES AND REGISTERS
G24
GRIL
LES
AN
D R
EGIS
TERS
G
PERFORMANCE DATA: SUPPLY GRILLES AND REGISTERS • 5100, 6100 AND 6700 SERIES
MODELS: 51DV, 51DH, 51SV, 51SH, 61DV, 61DH, 61SV, 61SH, 67DV, 67DH, 67SV, 67SH
ListedDuct Size(inches)
AlternateSizes
(inches)
CoreArea
(sq. ft.)
AkFactor
CoreVP
300.006
400.010
500.016
600.022
700.031
800.040
1000.062
1200.090
1400.122
TP0°22 1/2°45°
.015
.017
.026
.026
.030
.046
.041
.047
.072
.059
.068
.103
.081
.093
.142
.106
.122
.186
.165
.190
.289
.238
.274
.417
.324
.373
.567
36 x 3438 x 3240 x 3048 x 26
8.20
CFMNC
2460–
328018
410025
492030
574035
656039
820045
984051
1148056
5.584.844.22
T0°22 1/2°45°
26-42-7921-34-6313-21-40
37-57-9130-46-73
19-29-
47-70-10238-56-8224-35-51
57-79-11146-63-8929-40-56
65-85-12152-68-9733-43-61
75-91-12960-73-10338-46-65
84-102-14467-82-11542-51-72
91-111-15873-89-12646-56-79
98-121-17178-97-13749-61-86
36 x 3638 x 3442 x 3046 x 28
8.69
CFMNC
2607–
347618
434525
521430
608335
695239
869045
1042851
1216656
5.915.134.48
T0°22 1/2°45°
28-45-8422-36-6714-23-42
36-60-9631-48-7720-30-48
49-74-10839-59-8625-37-54
60-84-11748-67-9430-42-59
69-90-12755-72-10235-45-64
78-96-13662-77-10939-48-68
88-108-15270-86-12244-54-76
96-117-16677-94-13348-59-83
104-127-18083-102-14452-64-90
38 x 38 42 x 34 9.70
CFMNC
291010
388019
485026
582031
679036
776040
970046
1164052
1358057
6.605.725.00
T0°22 1/2°45°
28-47-8822-38-7014-24-44
42-62-10134-50-8121-31-51
53-78-11442-62-9127-39-57
62-88-12550-70-10031-44-63
73-95-13458-76-10737-48-67
83-101-14366-81-11442-51-72
93-114-16174-91-12947-57-81
101-125-17681-100-141
51-63-88
109-134-19087-107-15255-67-95
42 x 36 44 x 3448 x 30 10.16
CFMNC
304810
406419
508026
609631
711236
812840
1016046
1219252
1422457
6.915.995.23
T0°22 1/2°45°
29-48-9023-38-7215-24-45
43-64-10434-51-8322-32-52
53-80-11742-64-9427-40-59
64-90-12751-72-10232-45-64
75-97-13860-78-11038-49-69
85-104-14768-83-11843-52-74
95-117-16576-94-13248-59-83
104-127-18083-102-144
52-64-90
112-138-19590-110-15656-69-98
40 x 4042 x 3846 x 3448 x 32
10.77
CFMNC
323110
430819
538526
646231
753936
861640
1077046
1292452
1507857
7.326.355.55
T0°22 1/2°45°
31-50-9425-40-7516-25-47
44-67-10835-54-8622-34-54
56-84-12145-67-9728-42-61
67-94-13254-75-10634-47-66
77-102-14362-82-11439-51-72
88-108-15370-86-12244-54-77
99-121-17179-97-13750-61-86
108-132-18786-106-150
54-66-94
117-143-20394-114-16259-72-102
42 x 4244 x 4046 x 3848 x 36
11.89
CFMNC
356711
475620
594527
713432
832337
951241
1189047
1426853
1664658
8.097.026.12
T0°22 1/2°45°
32-52-9726-42-7816-26-49
46-69-11237-55-9023-35-56
58-86-12546-69-10029-43-63
69-97-13855-78-11035-49-69
81-105-14965-84-11941-53-75
92-112-15974-90-12746-56-80
102-125-17882-100-142
51-63-89
112-138-19590-110-156
56-69-98
122-145-21098-119-16861-75-105
44 x 44 46 x 42 13.07
CFMNC
392111
522820
653527
784232
914937
1045641
1307047
1568453
1829858
8.897.716.73
T0°22 1/2°45°
34-55-10427-44-8317-28-52
49-74-12039-59-9625-37-60
61-92-13349-74-10631-46-67
74-104-14659-83-11737-52-73
86-112-15869-90-12643-56-79
97-120-16878-96-13449-60-84
109-133-18987-106-151
55-67-95
120-146-20796-117-16660-73-104
129-158-223103-126-17865-79-112
46 x 46 14.30
CFMNC
429011
572020
715027
858032
1001037
1144041
1430047
1716053
2002058
9.728.447.36
T0°22 1/2°45°
35-57-10728-46-8618-29-54
51-76-12441-61-9926-38-62
63-95-13850-76-11032-48-69
76-107-15161-86-12138-54-76
89-116-16371-93-13045-58-82
101-124-17481-99-13951-62-87
113-138-19590-110-156
57-69-98
124-151-21499-121-17162-76-107
134-163-231107-130-18562-82-116
48 x 48 15.59
CFMNC
467712
623621
779528
935433
1091338
1247242
1559048
1870854
2182659
10.609.208.03
T0°22 1/2°45°
37-60-11330-48-9019-30-57
53-80-13142-64-10527-40-66
67-100-14654-80-11734-50-73
80-113-15964-90-12740-57-80
94-122-17375-98-13847-61-87
106-131-18585-105-148
53-66-93
119-146-20695-117-16560-73-103
131-159-226105-127-181
62-80-113
140-173-244112-138-19570-87-122
CFM - cubic feet per minuteTP - total pressure - inches w.g.VP - velocity pressure - inches w.g.T - throw in feetNC - Noise Criteria (values) based on
10 dB room absorption, re 10-12
watts @ 0° deflection.Core velocity is in feet per minute.
Performance Notes:1. Performance data is based on doubledeflection grille with opposed bladedamper (register).2. 0°, 22 1/2° and 45° represent verticalblade deflection angles and horizontalspread.3. Throw values are given for terminalvelocities of 150, 100 and 50 fpm underisothermal conditions.
4. Additional performance notes andcorrection factors for various models andsettings may be found on page G20.5. Data derived from tests conducted inaccordance with ANSI/ASHRAE Standard70 – 2006.
LOUVERED FACE GRILLES AND REGISTERS
G25
GRILLES A
ND
REG
ISTERS
G
HOW TO ORDER OR TO SPECIFY
SUGGESTED SPECIFICATION:
51DV, 51DH Double DeflectionFurnish and install Nailor Model (select one) 51DV or 51DH Double Deflection Supply Grilles of the type and size as shown onthe plans and air distribution schedules. The grilles shall have a dual set of extruded aluminum adjustable blades that are streamlinedshaped and spaced on 3/4" (19) centers. The frame is to be constructed from heavy gauge extruded aluminum and have reinforcedmitered corners. The finish shall be AW Appliance White (optional finishes are available).
(Optional) An opposed blade damper, constructed of heavy gauge corrosion-resistant steel (aluminum is optional) and operable fromthe face of the grille, shall be provided with all units.
The manufacturer shall provide published performance data for the grille, which shall be tested in accordance with ANSI/ASHRAEStandard 70 – 2006.
51SV, 51SH Single DeflectionFurnish and install Nailor Model (select one) 51SV or 51SH Single Deflection Supply Grilles of the type and size as shown onthe plans and air distribution schedules. The grilles shall have a single set of extruded aluminum adjustable blades that arestreamlined shaped and spaced on 3/4" (19) centers. The frame is to be constructed from heavy gauge extruded aluminum andhave reinforced mitered corners. The finish shall be AW Appliance White (optional finishes are available).
(Optional) An opposed blade damper, constructed of heavy gauge corrosion-resistant steel (aluminum is optional) and operable fromthe face of the grille, shall be provided with all units.
The manufacturer shall provide published performance data for the grille, which shall be tested in accordance with ANSI/ASHRAEStandard 70 – 2006.
MODEL SERIES: 5100
ALUMINUM SUPPLY GRILLES AND REGISTERS
EXAMPLE: 51DV - O - 24 x 12 - S - AW - DMI - A - —
1. Models
Double Deflection:
51DV Vertical Front Blades
51DH Horizontal Front Blades
Single Deflection:
51SV Vertical Blades
51SH Horizontal Blades
2. Damper (OBD)
(model suffix)
O Steel
OA Aluminum
— None
3. Nominal Width x Height
inches (mm)
4. Frame/Border Type
S Surface Mount
Border 1 1/4" (32) (default)
NF Narrow Frame
Border 1" (25)
5. FinishAW Appliance White (default)
AL Aluminum
BK Black
BW British White
LBP Light Bronze Paint
MBP Medium Bronze Paint
DBP Dark Bronze Paint
MI Mill
PC Prime Coat
SA Satin Anodized (clear)
SP Special Custom Color
6. Opposed Blade Damper Finish
DMI Mill (default)
DBK Painted Black
7. Fastening
A Screw Holes (default)
C Concealed Mounting Straps
D Concealed Screw Holes in Neck
N None
OPTIONS & ACCESSORIES: — None (default)
8. Insect Screen
IS Insect Screen
9. Plaster Sub-Frame
PF Plaster Sub-Frame
10. Gaskets
GK Foam Gasket
11. Earthquake Tabs
EQT Earthquake Tabs
Notes:
1. For a standard grille with no specialrequirements, specification is only requiredas far as the damper selection.
The "default" will automatically select"standard". For example, an aluminumdouble deflection register, front bladesvertical and steel damper, is Model 51DV-O.Unit will be supplied with screw holes andAW Appliance White finish.
2. Nailor recommends the selection ofvertical front blades on supply models forthe majority of commercial applications.
3. The larger dimension must alwaysbe specified first; for example 24" x 12" (610 x 305), not 12" x 24" (305 x 610).
MODEL SERIES: 5100
ALUMINUM SUPPLY GRILLES AND REGISTERS
LOUVERED FACE GRILLES AND REGISTERS
G26
GRIL
LES
AN
D R
EGIS
TERS
GSUGGESTED SPECIFICATION:
61DV, 61DH Double DeflectionFurnish and install Nailor Model (select one) 61DV or 61DH Double Deflection Supply Grilles of the type and size as shown onthe plans and air distribution schedules. The grilles shall have a dual set of streamlined shaped, roll-formed, corrosion-resistant steelblades that are adjustable, and spaced on 3/4" (19) centers. The frame is to be constructed from roll-formed, corrosion-resistantsteel and have reinforced mitered corners. The finish shall be AW Appliance White (optional finishes are available).
(Optional) An opposed blade damper, constructed of heavy gauge corrosion-resistant steel and operable from the face of the grille,shall be provided with all units.
The manufacturer shall provide published performance data for the grille, which shall be tested in accordance with ANSI/ASHRAEStandard 70 – 2006.
61SV, 61SH Single DeflectionFurnish and install Nailor Model (select one) 61SV or 61SH Single Deflection Supply Grilles of the type and size as shown onthe plans and air distribution schedules. The grilles shall have a single set of streamlined shaped, roll-formed, corrosion-resistantsteel blades that are adjustable, and spaced on 3/4" (19) centers. The frame is to be constructed from roll-formed, corrosion-resistantsteel and have reinforced mitered corners. The finish shall be AW Appliance White (optional finishes are available).
(Optional) An opposed blade damper, constructed of heavy gauge corrosion-resistant steel and operable from the face of the grille,shall be provided with all units.
The manufacturer shall provide published performance data for the grille, which shall be tested in accordance with ANSI/ASHRAEStandard 70 – 2006.
MODEL SERIES: 6100
STEEL SUPPLY GRILLES AND REGISTERS
MODEL SERIES: 6100
STEEL SUPPLY GRILLES AND REGISTERS
EXAMPLE: 61DV - O - 24 x 12 - S - AW - DMI - A - —
1. Models
Double Deflection:
61DV Vertical Front Blades
61DH Horizontal Front Blades
Single Deflection:
61SV Vertical Blades
61SH Horizontal Blades
2. Damper (OBD)
(model suffix)
O Steel
— None
3. Nominal Width x Height
inches (mm)
4. Frame/Border Type
S Surface Mount Border 1 1/4" (32) (default)
5. Finish
AW Appliance White (default)
AL Aluminum
BK Black
BW British White
LBP Light Bronze Paint
MBP Medium Bronze Paint
DBP Dark Bronze Paint
MI Mill
PC Prime Coat
SP Special Custom Color
6. Opposed Blade Damper Finish
DMI Mill (default)
DBK Painted Black
7. Fastening
A Screw Holes (default)
C Concealed Mounting Straps
D Concealed Screw Holes in Neck
N None
OPTIONS & ACCESSORIES: — None (default)
8. Insect Screen IS Insect Screen
9. Plaster Sub-Frame PF Plaster Sub-Frame
10. Gaskets
GK Foam Gasket
11. Earthquake Tabs
EQT Earthquake Tabs
Notes:
1. For a standard grille with no specialrequirements, specification is only requiredas far as the damper selection.
The "default" will automatically select"standard". For example, a steel doubledeflection register, front blades vertical andsteel damper, is Model 61DV-O. Unit will be supplied with screw holes and AWAppliance White finish.
2. Nailor recommends the selection ofvertical front blades on supply models forthe majority of commercial applications.
3. The larger dimension must alwaysbe specified first; for example 24" x 12"(610 x 305), not 12" x 24" (305 x 610).
HOW TO ORDER OR TO SPECIFY
LOUVERED FACE GRILLES AND REGISTERS
G27
GRILLES A
ND
REG
ISTERS
G
MODEL SERIES: 6700
STAINLESS STEEL SUPPLY GRILLES AND REGISTERS
EXAMPLE: 67DV - O - 24 x 12 - S - #4 - A - 304 - PFS
1. Models
Double Deflection:
67DV Vertical Front Blades
67DH Horizontal Front Blades
Single Deflection:
67SV Vertical Blades
67SH Horizontal Blades
2. Damper (OBD)
(model suffix)
— None
O Stainless Steel
3. Nominal Width x Height
inches (mm)
4. Frame/Border Type
S Surface Mount
Border 1 3/8" (35) (default)
5. Finish
#4 Brushed Satin Polished
(default)
AW Appliance White
6. Fastening
A Screw Holes (default)
N None
OPTIONS & ACCESSORIES:
7. Construction
304 Type 304 Stainless Steel
(default)
316 Type 316 Stainless Steel
8. Stainless Steel Plaster Sub-Frame
PFS Stainless Steel Plaster
Sub-frame
Notes:
1. For a standard grille with no specialrequirements, specification is only requiredas far as the damper selection.
The "default" will automatically select"standard". For example, a 304 stainlesssteel double deflection register, front bladesvertical and stainless steel damper, isModel 67DV-O. Unit will be supplied withscrew holes and #4 Brushed Satin Polishedfinish.
2. Nailor recommends the selection ofvertical front blades on supply models forthe majority of commercial applications.
3. The larger dimension must alwaysbe specified first; for example 24" x 12"(610 x 305), not 12" x 24" (305 x 610).
SUGGESTED SPECIFICATION:
67DV, 67DH Double DeflectionFurnish and install Nailor Model (select one) 67DV or 67DH Double Deflection Supply Grilles of the type and size as shown on theplans and air distribution schedules. The grilles shall be constructed entirely from 304 stainless steel (316 optional), and have a dualset of streamlined shaped roll-formed adjustable blades that are spaced on 3/4" (19) centers. The frames shall be constructed ofheavy gauge stainless steel and have reinforced mitered corners. All exposed surfaces shall have a #4 Brushed Satin Polished finish.
(Optional) A stainless steel opposed blade damper adjustable from the face of the grille, shall be provided with all units.
The manufacturer shall provide published performance data for the grille, which shall be tested in accordance with ANSI/ASHRAEStandard 70 – 2006.
67SV, 67SH Single DeflectionFurnish and install Nailor Model (select one) 67SV or 67SH Single Deflection Supply Grilles of the type and size as shown on theplans and air distribution schedules. The grilles shall be constructed entirely from 304 stainless steel (316 optional), and have a singleset of streamlined shaped roll-formed adjustable blades that are spaced on 3/4" (19) centers. The frames shall be constructed ofheavy gauge stainless steel and have reinforced mitered corners. All exposed surfaces shall have a #4 Brushed Satin Polished finish.
(Optional) A stainless steel opposed blade damper adjustable from the face of the grille, shall be provided with all units.
The manufacturer shall provide published performance data for the grille, which shall be tested in accordance with ANSI/ASHRAEStandard 70 – 2006.
MODEL SERIES: 6700
STAINLESS STEEL SUPPLY GRILLES AND REGISTERS
HOW TO ORDER OR TO SPECIFY
GRILLE AND REGISTER OPTIONS AND ACCESSORIES
G189
GRILLES A
ND
REG
ISTERS
G
MOUNTING FRAMES• Up to four methods of fastening available for most
models.
• Sub-frame available for professionally finishedopenings.
• Surface mount adapter frame for plaster and sheetrock ceilings are available in steel and aluminum. Theysimplify installation, save time and allow ceilingplenum access.
• Panel mounting available to suit architectural ceilingsystems.
OPTIONS• A selection of optional items that are available on
grilles and registers.
• Information on custom sizing for special applications.
FINISHES• Selection of standard and non-standard finishes to
choose from.
• Anodizing of aluminum products.
AIR BALANCING DEVICES• Opposed blade dampers for every application.
• Volume extractors.
Effective air balancing of an HVAC System requires thecorrect selection, specification and installation of the rightproduct to suit the system design.
Nailor offers a comprehensive range of models andoptions to cover all applications.
Nailor balancing devices are:
• Easy to select and specify. Many items can besupplied as factory mounted or packaged accessorieson grilles and registers.
• Designed to offer a smooth, accurate and predictableresponse during adjustment for precise air metering.
• Designed to provide quick access and adjustment.
• Engineered with attention to optimizing airflow, in orderto minimize noise, turbulence and pressure drop.
PRODUCT OVERVIEWOPTIONS AND ACCESSORIES FOR GRILLES AND REGISTERS
Model OBDDOpposed Blade Damper
Steel, Duct Mount
Model OBDOpposed Blade Damper
Steel, Neck Mount
Model EX-1Volume Extractor
Model PFSub-Frame
Model DFADrywall/Plaster Frame
Surface MountCeiling Adapter
Model EX-1Volume Extractor
Model OBD-AOpposed Blade DamperAluminum, Neck Mount
Model OBD-SSOpposed Blade Damper
Stainless Steel, Neck Mount
GRILLE AND REGISTER OPTIONS AND ACCESSORIES
G190
GRIL
LES
AN
D R
EGIS
TERS
G
Fastening and Border Frames
DUCT
Type A Screw Fastening (External)Standard method of fastening for all Nailor grilles andregisters in surface mount applications. All Nailorgrilles and registers are supplied this way unlessspecified otherwise. Universal application for allmodels and cost effective installation.
Screw holes are countersunk in the frame for mostmodels to provide an aesthetically pleasingappearance and are sized for #8 x 1 1/2" (38) oval-head screws which are supplied from the factorypacked with each grille or register and are painted tomatch the specified finish.
Type C Concealed MountingGrilles and registers are supplied with concealedmounting straps (at additional cost) which permitsurface mounting with concealed screws, allowing aclean frame appearance. The bracket attached to theback of the grille screws to an adjustable mountingstrap which can either be secured directly to the ductwall or hooked into a hem formed in the end of theduct. Not available on return grilles with 1/2" (13)spacing and a fixed angled blade deflection.Maximum size: 36" x 36" (914 x 914).
Type D Screw Fastening (Concealed)Screw holes are provided in the neck of the grille orregister frame. Screws are field installed at an anglethrough the grille frame and into the ductwork,providing a clean frame appearance. Installation ismore difficult than Type A due to the spaceconstriction between the grille blades. Care must betaken not to bend or scratch the grille. Notrecommended on return air grilles with a fixed angledblade deflection as accessibility to screw holes isgreatly restricted.
Type NF Narrow FrameAn optional reduced 1" (25) wide narrow borderframe is available on most aluminum models tosatisfy architectural considerations.
See individual models for availability.
Type A Screw Fastening (external)Standard
HEMMEDDUCT
Type C Concealed Mounting
DUCT
Type D Screw Fastening (concealed)
1" (25)
1 1/4"(32)OR
1 13/16"(46)
3/4" (19)OVERLAPMARGIN
NF Narrow Frame
Ceiling opening = CM + 1/4" (6)
Ceiling opening = CM + 1/4" (6)
IMPERIALMODULES
METRICMODULES
ImperialUnits
(inches)
S.I.Units(mm)
S.I.Units(mm)
12 x 12 305 x 305 300 x 300
16 x 16 406 x 406 400 x 400
20 x 20 508 x 508 500 x 500
24 x 12 610 x 305 600 x 300
24 x 24 610 x 610 600 x 600
36 x 24 914 x 610 900 x 600
48 x 12 1219 x 305 1200 x 300
48 x 24 1219 x 1219 1200 x 600
60 x 12 1524 x 305 1500 x 300
GRILLE AND REGISTER OPTIONS AND ACCESSORIES
G191
GRILLES A
ND
REG
ISTERS
G
Mounting Frames
PF Plaster/Mounting FrameAvailable (at additional cost) with most standard steel and aluminum grillesand registers. The Model PF Plaster Frame is constructed from extrudedaluminum and provides a convenient and professional way for finishing offthe grille or register opening. It provides a stable anchor for attachment, whileenabling the grille or register to be detached and replaced readily withoutdisturbing the finished surface of the wall or ceiling opening. It may be usedfor surface mounting on various materials or recess mounted in wet plaster.
PF = LISTED SIZE
LISTED SIZE + 2 1/4" (57)
5/16" (8)
PF = LISTED SIZE
DUCT = LISTED SIZE + 1/4" (6)
DUCT = LISTED SIZE + 1/4" (6)
Model PF Plaster Frame
Surface Mount Recessed
1 5/8"(41)
CM = CEILING MODULE
CM =
CEI
LING
MODU
LE
3/8"(10)
Model DFS
Model DFA
BRACKET ISADJUSTABLE
SELF-TAPPINGSCREW
1 7/16"(37)
1/2" TO 7/8"(13 TO 22)1 1/16"
(27)
FRAMINGMEMBERAROUNDOPENING
(BY OTHERS)
MOUNTINGSCREWS
AREFIELD
INSTALLED
1 5/32"(29)
PLASTEROR
DRYWALLCEILING
Model DFA requires framing of the ceilingopening with 'C' channel or wood studsfor attachment with mounting screws (byothers).
Model DFS is installed quickly and easilyusing adjustable fastening angle bracketswhich adapt to various ceiling thicknesses.Frames are roll-formed corrosion-resistantsteel with staked and mitered corners.
DFS (Steel), DFA (Aluminum) Drywall/Plaster Frame The DF Series are for mounting in finished drywall or plaster ceilings to accept any standard lay-in type grille, register, diffuser or otherceiling component. Installation of the air outlet is as simple as inserting them in a standard lay-in T-Bar type ceiling system.
The DF Series simplifies and reduces installation time compared with surface mount type diffusers. This is especially true where flexibleduct is utilized. A major benefit is that the DF Series allows access to the ceiling plenum space above for maintenance purposes withoutthe need for separate access doors. The finished appearance is professional and aesthetically pleasing.
Standard Finish: AW Appliance White. Other finishes are available.
FACE VIEW
O.A. FACE = CM + 2 1/8" (54)
O.A
. FAC
E =
CM
+ 2
1/8
" (54
)
CM = CEILING MODULE
CM =
CEI
LING
MOD
ULE
1 1/2"(38)
3/8"(10)
FACE VIEW
O.A. FACE = NOM. + 1 1/2" (38)
O.A
. FAC
E =
NOM
. + 1
1/2
" (38
)
IMPERIALMODULES
METRICMODULES
ImperialUnits
(inches)
S.I.Units(mm)
S.I.Units(mm)
12 x 12 305 x 305 300 x 300
16 x 16 406 x 406 400 x 400
20 x 20 508 x 508 500 x 500
24 x 12 610 x 305 600 x 300
24 x 24 610 x 610 600 x 600
CM - 1/16" (2)
CM = CEILING MODULE
3/8"(10)
CM - 1/4" (6)
CM - 1" (25)
CM = CEILING MODULE
15/16" (24)
3/8"(10)
TEGULARCEILING
TILE
A panel can be added to the majority of Nailor’s steel and aluminum return grilles to suitmany special architectural ceiling designs and ceiling module sizes. These panel mountgrilles are available in corrosion-resistant steel for the 6100 series steel grilles and bothaluminum and corrosion-resistant steel for the 5100 and 7100 series aluminum grilles.
To specify a steel panel; add the suffix S to the end of the selected panel variant. Tospecify an aluminum panel; add the suffix A to the end of the selected panel variant. e.g.If a steel panel is required with a Spline Type ceiling module, the variant code will becomeSPS.
GRILLE AND REGISTER OPTIONS AND ACCESSORIES
G192
GRIL
LES
AN
D R
EGIS
TERS
G
Panel Mounting/Ceiling Modules
Type TL
Available Ceiling Module Sizes
Border Type PL: Lay-in T-BarGrille or register is mounted in an extended panel to suit standard T-Bar Lay-in Type ceilings.
Border Type SP: SplineThe grille or register is mounted in an extended panel to suit splinetype ceiling modules.
Border Type MP: Metal Pan/Snap-inThe grille or register is mounted in an extended panel to suit metalpan ceilings that have snap-in type ceiling modules.
Border Type FP: Narrow Regressed T-Bar (Fineline®)The grille or register is mounted in an extended panel that will fit anarrow regressed T-Bar ceiling grid.
Border Type TL: Tegular Type T-BarThe grille or register is mounted in a panel that will extend below theT-Bar ceiling grid.
The maximum grille neck sizes availablefor panel mounting will be the ceilingmodule size selected - 3" (76).
Type PL
Type SP
Type MP
Type FP
CM - 1/4" (6)
CM = CEILING MODULE
CM = CEILING MODULE
CM - 1/16" (2)
13/16"(21)
CM - 1/4" (6)
CM - 5/8" (16)
CM = CEILING MODULE
9/16" (14)
5/16"(8)
Note: Splines on two opposite sides.
Steel lift bracket on the other two sides.
Ceiling Module
Imperial Units (in.) Metric Units (mm)
12 x 1224 x 1236 x 12
300 x 300600 x 300900 x 300
48 x 1220 x 2024 x 24
1200 x 300500 x 500600 x 600
36 x 2448 x 24
900 x 6001200 x 600
GRILLE AND REGISTER OPTIONS AND ACCESSORIES
G193
GRILLES A
ND
REG
ISTERS
G
OPTIONS:
RACA Return Air Crosstalk AttenuatorReturn Air Crosstalk Attenuator is designed to greatly reduce theamount of sound transferred from the return air plenum throughopen vents or return grilles, into the adjoining space.
EQT Earthquake TabsEarthquake (seismic) retaining safety tabs are available; factoryinstalled on grilles or registers when required by local buildingcode that units be independently restrained and safety wired tosupporting structure.
GK Foam GasketsAn optional foam gasket is available factory installed on the rearof all Type S corrosion-resistant steel and aluminum surfacemount grilles and registers.
Eliminates air leakage and the possibility of dirt streaking andsmudging from entrainment, particularly when installed onunevenly finished surfaces such as stucco.
IS Insect Screen1/16" (2) galvanized steel mesh, factory installed.
CUSTOM SIZING:
Oversized UnitsFor specialized applications and architectural considerations;certain grilles and registers can be manufactured in singlesections larger than the standard published maximum size atadditional cost. Aspect ratio, tolerances, manufacturing capabilityand weight have all to be considered by the factory prior toacceptance. Consult your Nailor representative for specificapplications.
Fractional/Hard Metric SizesNailor grilles and registers have been designed and aremanufactured to suit HVAC systems where the duct design hasbeen done using Imperial Units of measurement (i.e. feet andinches). The majority of Nailor grilles and registers are fabricatedas standard in 1" (25) nominal incremental units, giving thedesigner great flexibility during sizing selection.
At additional cost, the majority of Nailor grilles and registers canbe custom fabricated in fractional sizes for special applicationsand in Hard Metric (S.I. Units) when the HVAC duct design hasbeen done using the Metric System.
Consult your Nailor representative for availability on specificproject applications.
FINISHES:
POWDER COAT
AW Appliance White (standard)A white finish that is currently the industry standard. Closelymatches standard finishes supplied by the majority of T-Bar ceilingsystem manufacturers. (No additional cost).
AL AluminumContains suspended metal particles to give the appearance of asilver grey metallic or anodized finish. (No additional cost).
WH Off-WhiteHas a creamy appearance. (Additional cost)
BW British WhiteMatches most white ceiling tiles. (No additional cost)
LBP Light Bronze PaintAn economical alternative that closely matches industry standardanodizing in color, sheen and appearance. (Additional cost)
MBP Medium Bronze PaintAn economical alternative that closely matches industry standardanodizing in color, sheen and appearance. (Additional cost)
DBP Dark Bronze PaintAn economical alternative that closely matches industry standardanodizing in color, sheen and appearance. (Additional cost)
BK BlackThis black has a matte finish. (Additional cost)
SP SpecialThe Nailor range of diffusers are available in any color for specialarchitectural consideration. Custom colors are individually mixedto match customer supplied samples. (Additional cost)
ALUMINUM PRODUCT FINISHES:
SA Satin (Clear) AnodizedAdds a smooth satin finish to further protect the aluminum fromcorrosion (clear). (Additional cost)
STAINLESS STEEL PRODUCT FINISH ONLY:
#4 Brushed Satin PolishedStainless Steel models only. (No additional cost)
ALSO AVAILABLE:
MI Mill Finish(No additional cost).
PPA Paint Prepared Aluminum (Washed only)(No additional cost).
PC Prime Coat PaintColor will vary (Additional cost).
Options, Custom Sizing and Finishes
LISTED SIZE - 3/8" (10)
2" (
51)
GRILLE AND REGISTER OPTIONS AND ACCESSORIES
G195
GRILLES A
ND
REG
ISTERS
G
Type SL OperatorThe SL Operator incorporates a screwdriver slot, which adjustsfrom the face of the register. This operator is the standardsupplied with supply air registers such as the single and doubledeflection adjustable blade.
Type PL OperatorThe PL Operator is a concealed pivot lever, which is adjustedfrom the face of the register using a screwdriver. This operatoris for use only on fixed blade, angled deflection, return air grilles.When specifying, the blade orientation of the damper must beopposite of the grille.
Type GL OperatorThe GL Operator incorporates a lever that adjusts without theuse of tools. The lever operator extends through the grille faceand is an alternative for fixed blade, angled deflection, return airgrilles. When specifying, the blade orientation of the dampermust be opposite of the grille being used and the grille modelmust be specified.
WIDTH = LISTED DUCT SIZE - 3/8" (10)
HEI
GH
T =
LIST
EDD
UC
T SI
ZE -
3/8"
(10)
2"(51)
Model OBD Type SL (Screwdriver Slot)Grille Mount – Face Operator
Air Balancing Devices
OPPOSED BLADE DAMPERS — STEEL AND ALUMINUMNailor Opposed Blade Dampers are manufactured from heavy gauge, roll-formed, corrosion-resistant steel or extruded aluminum bladesand frame with miscellaneous steel components.
The gang operated multi-blade design with blades closing at 45 degrees permits fine volume control for accurate balancing with minimumdisturbance to the airflow pattern. Blades are individually pivoted on 1" (25) centers.
GRILLE MOUNT MODELS:OBD SteelOBD-A AluminumThis style of damper mounts directly on the neck of the grille and is sized to fit most Nailor grilles. Uses steel barbed S-clips for easy field mounting or removal when ordered separately. Supplied as standard with a screwdriver slot operator (Type SL) onsupply registers and a screwdriver pivot lever operator (Type PL) on fixed, angled deflection return registers. Type SL operator is standardif damper is ordered separately from grille. A lever operator (Type GL) is available as an option on fixed, angled deflection return registers.
Can be specified as an integral part of the grille (register) by adding a - O (steel) or - OA (aluminum) suffix to the grille model.
Min. Size = 4" x 2 1/2" (102 x 64) Max. Size = 24" x 24" (610 x 610).
Type PL (Pivot Lever)
Type GL (Lever)
GRILLE AND REGISTER OPTIONS AND ACCESSORIES
G196
GRIL
LES
AN
D R
EGIS
TERS
G
Type SL OperatorThese models are supplied with a screwdriver slot face operatorthat is accessed from inside the duct by removing the grille.
Type EH OperatorThe EH Operator incorporates an external hex device thatpenetrates the duct wall to provide control. For use with 3/16" (5)Allen key wrench (by others).
Type EN OperatorThe EN Operator incorporates an external (nylon) screwdriverslot device. This device is controlled externally through the duct.
Type QD Operator *The QD Operator includes a nylon snap-in extension that fits anexternal (nylon) operator. This device also includes a handlocking quadrant operator for control and position indication.
Type QX Operator *The QX Operator includes a nylon snap-in extension that fits anexternal (nylon) operator. This device also includes a 2" (51)stand-off bracket and hand locking quadrant for control andposition indication. To ensure quadrant is located on vertical sideof duct, specify damper with blades parallel to the horizontal ductdimension.
*Not available on Model OBDD-A
Type QD or Type QX (Hand Quadrant)
STAND-OFFBRACKET
FORQX
MINI-QUADRANT
SNAP-INEXTENSION
Air Balancing Devices
DUCT MOUNT MODELS:OBDD SteelOBDD-A AluminumDesigned for field installation, this damper mounts independently in the duct, separate from and behind the grille. Sized to suit and offera friction fit in nominally sized ducts. Secure the dampers with 1/2" (13) long sheet metal screws (by others) through the double walledsub-frame. Supplied as standard with a screwdriver slot operator (Type SL).
Min. Size = 4" x 2 1/2" (102 x 64) Max. Size = 24" x 24" (610 x 610)
Model OBDD Type EH (Hex.)Duct Mount – External Operator
Model OBDD Type EN (Screwdriver Slot)Duct Mount – External Operator
WIDTH = LISTED DUCT SIZE - 3/8" (10) H
EIG
HT
= LI
STED
DU
CT
SIZE
- 1/8
" (3)
2"(51)
Model OBDD Type SL (Screwdriver Slot)Duct Mount – Face Operator
GRILLE AND REGISTER OPTIONS AND ACCESSORIES
G197
GRILLES A
ND
REG
ISTERS
G
Air Balancing Devices
OPPOSED BLADE DAMPERS — STAINLESS STEELNailor Stainless Steel Opposed Blade Dampers feature heavy gauge, roll-formed blades and a heavy duty frame in all stainless steelconstruction. Type 304 stainless steel is standard with Type 316 as an available option.
The gang operated multi-blade design with blades closing at 45 degrees permits fine volume control for accurate balancing with minimumdisturbance to the airflow pattern. Blades are individually pivoted on 1" (25) centers.
GRILLE/DUCT MOUNT MODELS:OBD-SS Stainless SteelWhen ordered as part of the stainless steel grille, (using the suffix‘-O’ on the model number), the dampers are factory welded to thegrille frame to provide a secure non-removable connection. If thedampers are ordered separately, they are supplied with mountingtabs. The tabs allow the dampers to be field installed onto a grilleor to be mounted independently in the duct, separate from andbehind the grille.
All Nailor stainless steel dampers feature a Philip’s headscrewdriver operator that is accessed through the face of the grille.
1 3/4"(44)
HEI
GH
T =
LIST
ED D
UC
T SI
ZE -
1/4"
(6)
WIDTH = LISTED DUCT SIZE - 1/4" (6)OPERATOR
Model OBD-SS Grille/Duct Mount – Face Operator
GRILLE AND REGISTER OPTIONS AND ACCESSORIES
G198
GRIL
LES
AN
D R
EGIS
TERS
G
Volume Extractors
MODEL SERIESEX Blades on 2" centersEXD Blades on 1" centersThe Model Series EX Volume Extractors uniformly divert airfrom the main duct into the branch take-off and across the face ofa grille or diffuser. Gang-operated parallel blades available on 2"(51) or 1" (25) centers pivot from full open to full closed with bladesoverlapping for shut-off. The curved blade design improves airflowby reducing turbulence, thereby reducing noise and pressuredrop.
Specify or order: Length x Width. (Length is first dimension.Blades are parallel to width, second dimension).
FEATURES:• Material: Galvanized steel.
• Minimum size: 6" x 4" (152 x 102).
• Maximum size: 36" x 36" (914 x 914).
Operator Types
2 1/2"(64)
L = NOMINAL LENGTH (DUCT)L - 1/4 (6)
CLOSED POSITION
1 3/8(35)
FULLYADJUSTABLE
SETTINGW
- 1/
4 (6
)W
= N
OM
INAL
WID
TH (D
UC
T)
EX = 2" (51) CENTERSEXD = 1" (25) CENTERS
Optional Accessories
RLDLocking device for
Models EX/EXD-1-R.
EX/EXD-1Standard unit with
adjusting strap.
EX/EXD-1-RRod operator for
external operation.
EX/EXD-3Screw gear operator.
Adjusts with 3/16" (48)wrench (by others).
EX/EXD-2Linkage with 7/16" (11) square hole
(2 per unit). Remoteoperator (eg. Young
Regulator #1) by others.