Upload
rajaram-shetty
View
27
Download
2
Tags:
Embed Size (px)
Citation preview
Greenologic introduces the idea of “Plug & Play
Network”. Using a ZigBee wireless network for Network”. Using a ZigBee wireless network for
which the installation and the commissioning is
fast, simple and no specific skills are required
The main cost of any building-services project is now labour.
Building-management systems (BMSs) are no exception, and Building-management systems (BMSs) are no exception, and
typically 40-60% of the project cost is for wiring alone.
ZB Connection provides high-quality solutions for
transforming and replacing devices used in
automation systems to transmit information automation systems to transmit information
wirelessly. Whether it is a new installation or an
expansion of an old one, wireless ZigBee technology
delivers reliable information transmission without
the need of expensive cabling.
Key Features
• ZigBee technology
• Standard ModBus interfaces into ZigBee network
• No ZigBee and RF skills required
• Quick and low-cost installation
• Complete family of sensors and actuators
• Portable handheld diagnostic tool available
• Client module for OEM devices
• Third party ModBus devices can be connected
• Protocol converter from Modbus/RTU to ZigBee
A gateway connects computers, SCADA systems and other monitoring systems to the
ZigBee network utilizing Modbus protocols and RS-232, RS-485, USB or Ethernet-
connection
• Protocol converter from Modbus/RTU to ZigBee
• Coordinator function for a ZigBee network
• Transparent bridge towards other ModBus devices
Its function is to extend the radio range of devices making it possible to cross obstacles or
long distances; it can also act as a parent device for battery powered sensors of the same
family
• Repeating ZigBee messages between
devices with poor link or out of coverage
• Routing function
• RF power 1mW – 10mW
The bridge has the main function to connect through a ZigBee network one or more
Modbus slave devices equipped with RS485 interface to one of the gateways of the 4-Noks
product family. In this way the PLC or PC-SCADA connected gateway can communicate
with Modbus slave devices eliminating wire installation. It can also act as a repeater and a
parent device for battery powered sensors
• Connecting Modbus devices to the ZigBee network
• Using Modbus/RTU protocol and RS485 interface
• Routing function
In order to maintain an "open
system", a ZigBee Bridge has been
developed, this device lets you
connect to a third party Modbus
Master via the ZigBee wireless
network, devices using the Gateway,
Bridge and other 4 Noks modules.
Various wireless, configurable and battery-operated detectors and
control units: - temperature, lighting and humidity detectors - digital
and analogue detector inputs - relay controller units - pulse, phase
and hall-effect detectors
>>>> See product catalogueproduct catalogue for more information on each module in the family>>>> See product catalogueproduct catalogue for more information on each module in the family
It is equipped with an optical input that can be connected
to an electricity meter, this input controls an incremental
counter.
Its task is to acquire inputs and send the data it acquires
and generates to a compatible Gateway at regular intervals.
The device requires an uninterruptible 12/24 Vdc (or 12/24
Vac) power supply.
It is capable to count pulses emitted from flow rate meters
(water, gas, electricity) and to measure the temperature
from both the 2 on board NTC inputs. Pulse counters and
temperature samples are sent at regular intervals to a
gateway of 4-noks products family.gateway of 4-noks products family.
Moreover, if temperature sensors are installed into an
hydraulic circuit in the inlet and outlet pipes this device can
send the difference between them.
Battery Powered version
These products use ZigBee mesh wireless
technology to reliably pass information
around a site by using multiple, self
organising, communication paths. This
•• Lower cost to read the Lower cost to read the
metersmeters
•• More accurate and complete More accurate and complete
readsreads
allows energy consumption to be
monitored and reduced, whilst reducing the
time, cost and disruption involved in
deploying a main & sub-metering solution.
•• Integrate into existing BMS Integrate into existing BMS
to export data as CSV to to export data as CSV to
AM&T PackageAM&T Package
•• Integrate into Integrate into GreenGreenBoxBox
• ModBus profile on ZigBee platform
• Router function
• Power and Electrical Energy measurement
(monophase) up to 15KW (70Amp external CT)
• Data logger up to 1 month• Data logger up to 1 month
• Digital output for external relay
• Stand-by killer
• Hour by hour weekly program timer (automatic
on/off/stand-by killer)
• Override push-button
Introducing Appliance Level Monitoring & ControlIntroducing Appliance Level Monitoring & Control
• ZigBee technology
• Standard ModBus interfaces into ZigBee network
• Monitor & control at the appliance level• Monitor & control at the appliance level
• Full control and scheduling features
• Built-in energy & cost counters
• Unique, patented technology for controlling pilot wire enabled electric heaters
• Enables further cost and energy savings on existing systems
• “mini BMS” solution for smaller projects
With administrative tools it is easy to analyse the current state of the network using a
dedicated Pc-software or a handheld analyser.
Z-CONFIG (PC Software) allows the analysis of ZigBee networks, allows you to view graphically the
quality of radio connections between routers that make up the network. You can easily Identify
weakness in a network, therefore it represents a useful tool in the test phase of the installation.
Z-HANDZER powerful handheld tool with unique features that reduce time for deploying and
commissioning ZB Networks. Displays RF strength of the Gateways and Routers in order to check if
one point has network coverage and can be used to deploy a ZigBee device
� New Build
� Refurbishments
� Schools
� Hospitals
� Commercial
� Heritage Buildings
� Luxury Homes
� Manufacturing
� Hotels
� Leisure Centres� Commercial
Buildings
� Offices
� Retail Shops
� Shopping Centres
� Religious Buildings
� Leisure Centres
� Small & Large Building
� Extend Existing
BMS/PLC/SCADA
Systems with ease
� OEM ZigBee Devices