-
Boost the positive effect of autolube
Extended warranty
The comfort of recurring deliveries
Using an automatic lubrication system is an important step in
enhancing your efficiency and improving the lifetime of your
machine or vehicle. However, an inferior grease will lower that
positive impact. GreenLube is a high quality grease. The usage of
one of the GreenLube greases will boost the positive effect of the
Groeneveld automatic lubrication system.
When using the GreenLube grease in combination with a Groeneveld
automatic lubrication system, Groeneveld will provide a two year
full warranty and an additional year parts only.
With a grease contract you will always have enough grease
available in the workshop to refill the Groeneveld automatic
lubrication system. Our experts will calculate the grease demand
for the machine or vehicle based on the foreseen usage and
Groenevelds longstanding experience.
Groeneveld has exactly the right type of grease for every
application and every system. This is your guarantee for
trouble-free operation of your system and perfect lubrication of
your machines, vehicles or plants.
GreenLube greasesGet the best out of your system
Secure your grease contractGo to GreenLube.com
123
+
+
+
-
EP-0 EP-2
0KP0G-30
ISO-L-XCBFB0
2KP2K-20
ISO-L-XBCEB2
Lithium Lithium
Green Dark brown
Mineral oil Mineral oil
200 mm²/s15 mm²/s
290 mm²/s20 mm²/s
355-385 mm/10+30 mm/10
265-295 mm/10+35 mm/10
>170°C >180°C
-30 to +110°C -20 to +130°C
0-02-2
0-0-
1-9025%
1-908%
3400 N-
2600 N-
Universal applications -
- F121600
F114818 F121447
- F130827
F174236 F174240
F210056 F210060
F178102 F178103
Choose your GreenLube grease
ZW-0 HT-OT-0 Hammerlube
0KP0K-20
ISO-L-XBCHB0
0GOG0N-30
ISO-L-XCDIB0
1.5KF1.5G-30
ISO-L-XCBAA1.5
Lithium complex Alassca complex Lithium
Brown Dark brown Copper
Mineral oil Mineral oil Mineral oil
465 mm²/s27 mm²/s
800 mm²/s43 mm²/s
140 mm²/s10 mm²/s
335-385 mm/10+40 mm/10
355-385 mm/10+30 mm/10
290-320 mm/10-
>180°C >260°C >180°C
-20 to +120°C -30 to +140°C -30 to +110°C
2-2-
0-02-2
1-90 1-90 1< 10%
3200 N-
7500 N-
2400 N-
Agricultural Earthmoving
Extreme stress variations
On-shore rock drilling
*BreakAlube
- - -
F121186 - -
- - -
F174237 F174239 F600585
F210072 F210068 F600586
F121626 F210069 -
Heavy DutyUniversal
ClassificationNLGI Grade ASTM D217DIN 51502ISO 6743
Thickener type
Colour
Base fluid
Base oil viscosity at 40°CISO 12058 100°C
Mechanical stabilityPenetration 60 strokesISO 2137 100,000
strokes
Dropping point IP396
Temperature range
Corrosion protectionEmcor distilled waterEmcor salt water
Water resistance at 90°CWater wash out at 38°CISO 11009
4-ball weld loadDIN 51350:4
Application area
0.4 kg (cartridge)
1.7 kg (CompAlube)
2.4 kg (EcoPlus)
18 kg (plastic drum)
50 kg (steel drum)
180 kg (steel drum)
When is grease considered suitable?Greases used in automatic
greasing systems must meet several important requirements, such
as:
• The grease must be highly homogenous. Oil and soap should not
separate, not even under high pressure or when they have been in
the system for a prolonged period of time
• The grease is often pumped over substantial distances through
thin tubes, where it is subject to significant
alterations in temperature. Nevertheless, it must remain easy to
pump at all times
• The grease must have good ‘lubricating properties’ and prevent
metal-to-metal contact even in the severest conditions (EP value).
Also, it must be able to create protective films and provide
sufficient protection against corrosion
-
LT-00 ELT-2
00KP00G-35
ISO-L-XCBIB00
2KPHC2K-55
ISO-L-XECIB2
Lithium complex Lithium complex
Yellow Beige
Mineral oil Synthetic oil
110 mm²/s12 mm²/s
45 mm²/s8 mm²/s
400-430 mm/10-
265-295 mm/10+20 mm/10
>170°C >260°C
-35 to +100°C -55 to +120°C
0-02-3
0-02-2
0-90
2400 N-
2600 N-
Low temperatures Extremely low temperatures
- -
- -
- -
F210055 -
F210057 F210073
F210059 -
Bio EP-0 Bio EP-2
0KPE0G-40
ISO-L-XD(F)BIB0
2KPE2G-40
ISO-L-XD(F)BIB2
Anhydrous Calcium Anhydrous Calcium
Yellow Yellow
Ester Ester
460 mm²/s50 mm²/s
500 mm²/s53 mm²/s
355-385 mm/10-
265-295 mm/10-
>180°C > 140°C
-40 to +100°C -40 to +100°C
-- 2-2
0< 10%
0< 10%
3600 N 3200 N-
Biodegradable2013 VGP compliant
Biodegradable2013 VGP compliant
- -
- -
- -
F617037 F617041
F617038 [
F617039 F617043
Biodegradable Low TemperaturesFM-0
0KHC0E-35
ISO-L-XCBEA0
Anhydrous calcium
White
Synthetic oil
610 mm²/s73 mm²/s
355-385 mm/10-
>130°C
-35 to +90°C
2-2-
1-90
2000 N204 kg
Food industry
-
-
-
F174238
F127457
F210065
Food
GreenLube greases: proven qualityGroeneveld had several grease
types developed - under it’s proprietary brand name, GreenLube -
for use in its automatic greasing systems. The balanced formula of
the components give GreenLube a number of unique properties:
• Easy to pump, even at low temperatures• Highly
water-resistant• Keeps its properties in the severest conditions•
Provides good protection against corrosion• Does not contain heavy
metals
Selecting the right greaseIt is essential that you select the
right grease for your application. The choice is determined by the
intended use, the operational temperature, ambient factors, the
severity of the conditions of use and nature (constant or
constantly changing). Groeneveld can advise you on which grease
will provide the best results when used in combination with the
greasing system that you have selected.
-
With a grease contract you will always have enough grease
available in your workshop to refill the Groeneveld autolube
systems. Based on the foreseen usage you will receive multiple
grease shipments per year. In this way you will always have enough
grease in-house to perform refills without the need of having a lot
of stock.
A grease contract extends the warranty with one year for the
complete system and one year parts only.
Go to GreenLube.com for more information and to secure your
grease shipments.
Grease contractRecurring shipments
Extend
your warranty
Learn more on our webs i
tegroeneveld-lubrication-solutions.com
Testimonials - News - Contact - Product Selector
