Green Abrasives Green Technology for America

IBIX® Calcium Carbonate - CarbonArt® Available in Two Grain Sizes - Z5 & Z6Selected by the IBIX team in collaboration with experts in monument restoration. Laboratory and worksite testing proved it to be one of the most effective and less invasive materials for cleaning stone, brick, marble and lithotypes in general. Recommended by the US Capital for Bronze statue cleaning.

CharacteristicsIBIX calcium is a European quality grade, now available in the USA. Every batch is analyzed and certified for homogeneous grain size and spherical morphology (important in Monument restoration), as well as the purity of the extremely white material. These characteristics along with Mohs hardness lower than 3, makes CarbonArt an excellent product for cleaning stone and delicate surfaces.

IBIX Garnet a Natural Abrasive Material IBIX Garnet consists of almandite garnet grains, one of the hardest, most durable natural minerals known to man. Eco-friendly, thanks to its non-toxicity, IBIX Garnet is compliant with environmental protection standards. It makes working environments safer, healthier, cleaner and reduces dust due to it’s non friable charecteristics.

Garnet is Absolutely Natural and Chemically InertIt does not contain ferrite and therefore does not oxidize which means it is used to blast Stainless Steel, Antimagnetic Steel, Aluminum, etc. It does not break on impact and contains no silicosis therefore safe for operators. Garnet cuts disposal costs, thanks to low consumption and reusability.

PropertiesLow consumption: high stripping speed (high number of grains per unit of volume, ft/hr), increases blasting performance. Our IBIX units can strip up to 150 – 350 ft./h. Low Friability: re-utilized 5 to 10 times (according to other application types) without losing any of its outstanding stripping power.

Special abrasives like Walnut shells, Glass Beads & Soda, also available upon request.

The IBIX business philosophy is dedicated to saving the environment for the next generation.

Working with Government Agencies across the world to promote cost saving and less invasive; equipment, material and knowledge for surface cleaning and protection. IBIX research and experience makes us the industry leader in microabrasion systems and materials for today and the future.

Available Particle SizesCALCIUM CARBONATECarbonArt® Z6, .3 mmCarbonArt® Z5, .6 mm

GARNETGarnet 30/40, Garnet 80, Garnet 120, Garnet 150, Garnet 200, Garnet 350

Choosing the right Media allows the Operator to

make the correct choice for the best possible

surface finish.

Our Units allow for wide variety of choices,

even extremely fine 200-350 Mesh.

CORPORATE HEADQUARTERS8486 Seminole Blvd CSeminole, FL 33772

727.322.4611www.IBIXUSA.com

© Copyright IBIX Surface Technologies LLC 2013 ® Registered Trademarks of IBIX Surface Technologies, LLC

Green Polymers

Polyolefins PHCPHC-A: UV resistance, drinking water contact approved, release properties, electric insulation, flexibility, impact and abrasion resistance Operating temperature up to 70°C (in air) PHC-H: Slightly harder than PHC-AOperating temperature up to 80°C (in air)

Polypropylene PP10/PP20 Chemically modified polypropylene gradeSuitable for flame spraying of oil & gas pipes and fittingsConforming to all major oil & gas companies’ specs

More PolyHotCote® FormulationsSpecial Antislip PolyHotCote (with plastics or mineral materials)

PolyHotCote Anti-microbial: PolyHotCote Photoluminescent: PolyHotCote Fluolux

IBIX Polymer Resin

No VOC’s Non-Toxic Coatings

Thermoplastic Coating Powders;anti-osmotic, anti-corrosion

anti-acid, anti-abrasion anti-graffiti coatings

COLOR PHC RAL NuMBeR NuMBeR

Beige 222 RAL1015

Yellow 344 RAL1021

D Blue 556

L Grey 613 RAL7035

D Grey 695

Brown 838 Near RAL8019

Black 700 RAL9005

Red 223 RAL3020

Green 475 RAL6005

Blue 542 RAL5015

Silver Grey 654 RAL7001

Charcoal 640 RAL7016

Brick 813 RAL3009

White 110 RAL9016

TYPICAL PROPeRTIeS OF THe POWDeRCoverage (100% efficiency) 14.6 ft2/lb at 14 milsParticle Size 95% less than 10 milsBulk Density (at rest)* 29.4 lb/ft3Fluidizing Characteristics ExcellentColors See color cardPackaging 44 lbs cardboard boxes

TYPICAL PROPeRTIeS OF THe MATeRIALSpecific Gravity* 0.96 g/cm3Tensile Strength ISO 527 2030 lb/in2Elongation at Break ISO 527 800%Brittleness Temperature ASTM D-746 -108°FHardness Shore A 95 Shore D 44Vicat Softening Point ISO 306 158°FMelting Point 221°FTear Strength ASTM D1938 0.13 lbf./milEnvironmentalStress Cracking ASTM D1693 Greater than 1000 hrsToxicity Index NES 7 1.8Flammability UL94 3.2mm molding Unrated (see also Properties of Coating)Dielectric Strength IEC243 VDE0303 1.21 kV/mil at 15 milsVolume Resistivity IEC 93 3 x 1017 Ohm.cmSurface Resistivity IEC 93 8 x 1017 Ohm at 14 mils