Upload
hoangdiep
View
329
Download
8
Embed Size (px)
Citation preview
GREASE YOUR CHALLENGES ARE OUR NEXT PRODUCTS
Chemtool Incorporated leads the industry because we are driven by technology and innovation.
ALPHA 2000 - This thickener system combined with its mid-viscosity petroleum base fluids makes it a premium all-purpose grease. This product also provides excellent EP and anti-wear properties without traditional additives. Alpha 2000 AD - For environments where there is constant high temperature, it uses polymer chemistry to provide higher viscosity and VI for better protection at higher temperature. CSC 980 TAN - This product gives all the benefits of ALPHA 2000 plus it allows for better extreme low and high temperatures properties and serves as grease for “sealed for life” applications. CHEMLITH EP-2-A - Economical, general-purpose lithium grease designed to compete with most major grease brands. This product should not be recommended for extreme conditions. Also available in NLGI No. 0 & 1 grade. DURALUBE EP-2 - A premium, lithium complex grease commonly used in automotive applications for use in wheel bearings, chassis points and various steel mill applications. It’s an extreme pressure grease and provides superior protection.
LITHPLEX HV EP-2 - A lithium complex lubricating grease which contains high viscosity base fluids that provide good protection in higher temperatures. Summer/winter grade recommended. CHEMPLUS 2-R - A Polyurea (no metals) lubricating grease formulated specifically for electric motor applica-tions. It is also recommended for other applications with ball bearings. Product not compatible with most greases. CHEMTEMP - A clay-thickener grease specifically formu-lated for very high temperature applications. However, in high temperature applications, frequent regreasing must occur or the organics can burn out and leave a clay resi-due. Chemtemp SHT (synthetic base oil) is also available. ACG EP-2 - An aluminum complex-thickened grease with similar performance to that of lithium complex greases.Although lower cost alternatives, caution should be used to insure compatibility of thickener chemistry. SYNTEMP 1000TF - Unique, white inorganic grease de-signed for use in high temperature applications. It provides excellent oxidation stability and is fortified with PTFE. CALPLEX HDMZ - Unique lubricating grease formulated for heavy industry. Calplex HDMZ contains molybdenum disulfide to withstand shock loads, excellent corrosion protection and polymers for excellent water resistance.
P15
REMIUM PRODUCTS
CHEMTOOL GREASE PRODUCTS Color Temp Product Name Thickener NLGI Grades Base OIl Appearance Range Comments
GENERAL PURPOSE
Chemlith E-00-A Li 00 MO Amber Smooth -20 - 150°C NLGI 2, 3 available Chemlith EP-0-A Li 0 MO Amber Smooth -20 - 150°C Chemlith EP 1 Li 1 MO Amber Smooth -20 - 150°C
HEAVY DUTY
Alpha 2000 HD #2 OBCS 2 MO Tan Smooth -20 - 150°C Alpha 150-5M-0 OBCS 0 MO Black -20 - 150°C Calplex HDMZ OBCS 2 MO Brown Smooth -10 - 150°C NLGI 2, 3 available Chemplus 2 ELG HVY Polyurea 1,2 MO Green -20 - 150°C Duralube EP-2 HT LC 2 MO Dark Amber -20 - 150°C Duralube MY1-HV LC 1 MO Gray Tacky -20 - 150°C Duralube MY2-HV LC 2 MO Gray Tacky -20 - 150°C
HIGH SPEED
Chemplus 2 R Polyurea 1,2 MO Red Smooth -20 - 150°C
HIGH TEMPERATURE Bentone Moly 2 Bentone 2 MO Gray Smooth -20 - 170°C NLGI 3 available Bentone X-200 Bentone 2 MO Red Tacky -20 - 170°C Chemtemp SHT 2 Bentone 2 MO/Ester Amber Smooth -20 - 150°C CSC 174 MGD OBCS 2 PAO Gold -40 - 170°C CSC 980 Tan OBCS 2 PAO Tan Smooth -40 - 170°C CSC 980 MT3 OBCS 2 PAO Black Smooth -40 - 170°C
HIGH PERFORMANCE
Duralube Special With PTFE PTFE 2 MO Amber Tacky -20 - 150°C Supermil M-125 PTFE 2 Silicone White -40 - 250°C Supermil-HT 2-360 PTFE 2 PFPE White -40 - 250°C Supermil-HT 2-460 available (460 cST) Syntemp 1000 TF FS 2 Silicone White -40 - 220°C
MULTI PURPOSE
Alpha 2000 OBCS 0,1,2,3 MO Tan Smooth -20 - 150°C Alpha 2000 Green OBCS 2 MO Green -40 - 150°C Alpha 2000 Tan OBCS 2 MO Tan Smooth -20 - 150°C Chemplus EP 2 BG Polyurea 2 MO Blue Green -20 - 150°C Duralube EP 1 Blue Tacky LC 1 MO Blue Green -20 - 150°C NLGI 3 available Duralube EP 2 Red HV LC 2 MO Red -20 - 150°C Duralube EP 2 Green LC 2 MO Green -20 - 150°C SLC ISO 220 LC 2 PAO Purple -40 - 170°C Torque Lube EPM Lithium 1 MO Black -20 - 150°C
Spindle Lube OBCS 3M OBCS 1.5 MO Gray-Black -20 - 150°C
CHEMTOOL GREASE PRODUCTS Color Temp Product Name Thickener NLGI Grades Base OIl Appearance Range Comments
OPEN GEAR
Alpha OGL-1860 #1 OBCS 0,1 MO Black Tacky -20 - 150°C
CT Plex OGL 0-2500 AC 0 MO Black Tacky -20 - 150°C
Tacky OGL EP 11 Ca/Li — MO Black Tacky -20 - 150°C
SPECIALTY
Chemlith MY 2B Lithium 2 MO Black -20 - 150°C
Coupling Grease HT -1 Lithium 1 MO Gray-Black -20 - 150°C
SLC HV 00 Purple LC 0 PAO Purple -40 - 170°C
SLC ISO 220 LC 2 PAO Purple -40 - 170°C
Torque Lube EPM Lithium 1 MO Black -20 - 150°C
Spindle Lube OBCS 3M OBCS 1.5 MO Gray-Black -20 - 150°C
Aluminum Synthetic Overbased Lithium Lithium Organic Overbased Properties Complex Silica Calc/Sulfon 12 Hydroxy Complex Polyurea Clay Calc/Sulfon
Dropping Point °F 500+ 500+ 572+ 350-400 500+ 500 572+ 575+
Dropping Point °C 260+ 260+ 300+ 177 - 204 260+ 260 300+ 300+
Max Usable Temperature °F 300 350 320 275 300 300 350 320
Max Usable Temperature °C 160 177 177 135 160 160 177 177
Water Resistant Good to Excellent Good to Good Good to Good to Fair To Good to Excellent Excellent Excellent Excellent Good Excellent
Work Stability Excellent Fair Excellent Good Excellent Good Good Excellent
Oxidation Stability Good Excellent Excellent Good Good Excellent Good Excellent
Protection Against Rust Good to Good Good to Poor to Fair to Fair to Poor to Good to Excellent Excellent Excellent Excellent Excellent Excellent Excellent
Pumpability Centralized System Good Good Excellent Good Excellent Excellent Good Excellent
Oil Separation Excellent Fair Excellent Good Excellent Excellent Excellent Excellent
Appearance Smooth Smooth Smooth Smooth Smooth Smooth Smooth Smooth Amber White Tan Amber Amber Tan Amber Brown
Other Properties EP Grades EP and EP Grades EP Grades EP Grades EP Grades EP and Available Antiwear Available Available Available Available Antiwear
Principal Uses Multiservice Multiservice Multiservice Farming Multiservice Multiservice High Temp. Multiservice Industrial Industrial Industrial Household Industrial Industrial Frequent Industrial Steel Mill Steel Mill Automotive Automotive Automotive Automotive Relube Automotive Steel Mill Commercial Steel Mill Steel Mill
Chemtool Product ACG EP-2 Syntemp Alpha 2000 Chemlith EP2A Duralube EP2 Chemplus - Chemtemp-2 Calpex Alplex 1000/Moly 1000TF Alpha 2000HD Chemlith EP1A Lithplex EP2 EP-2-BG HDMZ Alplex 2500 CSC 980 TAN Chemplus 2-R Chemplus 1-SS
CHEMTOOL GREASE APPLICATION GUIDE
MISSION STATEMENT
Call 815-957-4140 or go to www.chemtool.comChemtool, Inc. Corporate Technology Center 801 W Rockton Road, Rockton, IL 61072
Phone: 815-957-4140 Fax: 815-624-0381
Chemtool Incorporated is a world class leader in providing lubricants, specialty products and support services enhancing growth, profitability and value for our global business partners better than any company in our industry. We are committed to conduct our business in an ethical manner, focusing on new technologies and continuous improvement in environmental, health, safety and quality while supporting our worldwide team and the communities in which we are located.
CHEMTOOL INDUSTRIALWORLDWIDE FACILITIES
The Industrial Group provides our complete product line of specialty fluids and lubricants for all of our customers’ manufacturing processes. We provide a “One Source Solution”.
TECHNOLOGY GROUP The Technology Group is committed to the pursuit of developing innovative products for investment in new markets and to meet our customers’ changing needs. This pursuit is conducted in a cultureof continuous improvement with respect to quality, safety and the environment. Each Chemtool Incorporated facility contains fully staffed quality control laboratories that are monitored rigorously to ensure our quality and technical support consistently deliver exemplary results that meet our customers’ expectations. QUALITY POLICY Chemtool Incorporated and its employees are committed to provide the best quality product, service and technical support that our customers require and to deliver these in a timely, safe and cost effective manner. We are further committed to continually improve our quality management system, product, processes and level of customer satisfaction. ISO 9001: 2008ISO 14001 (Milan, MI Plant)
05/14 50