Grant® Sliding Door Sets for Single, Pocket and Bi-parting ... · PDF fileGrant® Sliding Door Sets for Single, Pocket and Bi-parting Doors

Grant® Sliding Door Setsfor Single, Pocket and Bi-parting Doors

www.hettich.com2.2

Single Door SetTop Line Grant 6023up to 50 lbs/door (23 kg/door) for door thickness w“ (19 mm) minimum, side mount, adjustable

Top Line Grant 6023A medium duty sliding door hardware series ideal for single and bi-parting installations. Applications include doors between rooms, closet doors, cabinets, storage walls, and partitions.

• For doors w“ and up weighing up to 50 lbs/door (23 kg/door)

• Ball-bearing wheels ensure a smooth, quiet and long lasting performance.

• Dual set of mounting holes; ideal for hollow core doors

• Easy-turn cam vertical adjustment

• Dust free track design

• Quick door hanging by tilting pre-mounted hardware onto track profile

• Floor guide required

• Made in USA

1 18”

2 ¼”””

1 m”

1 w”

R”

11 8”

,”

w” min.

a”

± 8”

1 4”

2” (12.7)

4” (101.6)

(57.2)

(44.4)

(5.6)

(46)

(28.6)

(19)

(23.8)

(28.6)

(9.5)

w” (19)

(31.8)

(3.2)

a” ( 9.5)

screw #8 x 1-¼” panhead

4” (6.4)

(12.7)2”

Technical specifications are subject to change without notice

2.3www.grantdoorhardware.com

Single track 6003Aluminum extruded, pre-drilled holes

Top Line Grant 6023 door hardware is available in two purchasing options (not available in sets)

Screws not included - recommend #8 Pan Head

Top Line Grant 6023 components

Carrier 6330

Steel, single wheel, 2“ offset, side mounting, adjustable, ball bearing wheel, dual mounting holes

Screws included

Specifications:Mounting: Side Adjustment: 4“ (6.4 mm) vertical Door thickness: w“ (19 mm) min. Headroom: 18“ (28.6 mm) min., 1a“ (34.9 mm) maxApplication: Single & bi-parting

1 8” (28.6)

(23.8),”

Finish Order no. PU

zinc-plated 113 333 4 50Length Order no. PU

6’ (1800 mm) 050 461 5 8’ (2400 mm) 050 462 512’ (3600 mm) 050 464 5

Floor guide 110

Nylon, sold in pairs

Screws included

Finish Order no. PU

N/A 050 101 50 sets

Option II Separate components

Option I Track only

www.hettich.com2.4

1 w” (44.4)

(12.7)2”

3” (76.2)

2 ¼” (57.1)(19)

w” min.

28.61 8”

,”(23.8)

1 8”(28.6) screw #8 x 1-4” panhead

½” (12.7)

a” (9.5)

R” (5.6) w”

(19)

1 m”

1 4”

(46)

(31.8)

4” (101.6)

a” (9.5)

± 8” (3.2)

Single Door SetTop Line Grant 6053up to 75 lbs/door (34 kg/door) for door thickness w“ (19 mm) minimum, side mount, adjustable

Top Line Grant 6053A medium duty sliding door hardware series ideal for single and bi-parting installations. Applications include doors between rooms, closet doors, cabinets, storage walls, and partitions.

• For doors w“ and up weighing up to 75 lbs/door (34 kg/door)

• Ball-bearing wheels ensure a smooth, quiet and long lasting performance.

• Dual set of mounting holes; ideal for hollow core doors

• Easy-turn cam vertical adjustment

• Pivoting rocker arms ensure track-carrier contact.

• Dust free track design

• Quick door hanging by tilting pre-mounted hardware onto track profile

• Floor guide required

• Made in USA



Top Line Grant 6053 door hardware is available in four purchasing options

Hardware and trackTop Line Grant 6053 components

Carrier 6360

Steel, double wheel, 1/2“ offset side mounting, adjustable, ball bearing wheels, dual mounting holes

Screws included

Floor guide 110


Screws included

Top Line Grant 6053 hardware set (without track)

The hardware set includes: 2 carriers 6360 ball bearing wheels 1 floor guide 110 necessary screws installation instructions

For longer track application order hardware set and track separately

Option I Complete package: includes track, hardware set, and all screws

Option IV Separate components

Option II Track only

Specifications:Mounting: Side Adjustment: 4“ (6.4 mm) vertical Door thickness: w“ (19 mm) min. Headroom: 18“ (28.6 mm) min., 1a“ (34.9 mm) max.Application: Single & bi-parting

1 8” (28.6)

(23.8),”

Finish Order no. PU

N/A 050 101 50 sets

Article Order no. PU

Hardware set 113 332 2 10 sets

Length Order no. PU

6’ (1800 mm) 050 461 5 8’ (2400 mm) 050 462 512’ (3600 mm) 050 464 5

Finish Order no. PU

zinc-plated 113 333 7 50

Length Order no. PU

4’ (1200 mm) 113 332 3 10 sets8’ (2400 mm) 113 332 4 10 sets


Option III Hardware set only


www.hettich.com2.5.1

Single Door Set Grant 75Eup to 75 lbs/door (34 kg/door)for door thickness w" (19 mm) minimum, top mount, adjustable

ADJUSTMENT

#10x1 Flathead Wood Screw

2” ± 7/32” (50,8 ± 5.5)

(20.3)

(35.4)

(70)

111/32”(34)

(19)

4”(101.6)

1 13/32”

13/16”

3/4”

5/32” (4)

23/4”

min 3/4”

ADJUSTMENT

(19.1)

(44.4)13/4”


Grant 75E

The Grant 75E Series is a medium duty commercial and residential grade sliding door hardware series ideal for single and bi-parting installations. Applications include doors between rooms, closet doors, cabinets, storage walls, and partitions.

• Precision ball bearing wheels ensure smooth, quiet, and long lasting performance

• Pre-drilled aluminum box track hides the hardware

• Quick release mechanism for easy door installation and adjustment

• v“ (11.1 mm) vertical adjustment; minimal headroom required

• Track is available in lengths up to 16' (4800 mm)

• Flexible system - 50E tracks and carriers also used in Bi-fold 50 series

• Bi-parting applications achieved by adding an additional 75E Hardware set; By-pass applications can be achieved by mounting two tracks in parallel - 75E By-pass sets also available

• Meets and/or exceeds ANSI/BHMA standards

www.grantdoorhardware.com 2.5.2

Specifications:Mounting: Top Adjustment: v“ (11.1 mm) vertical Door thickness: w“ (19 mm) min. Headroom: 1 G“ (45.2 mm) min., 2 R“ (56.4 mm) max.Application: Single & bi-parting

Grant 75E Series door hardware is available in four purchasing options


Option I - Complete package Includes mill finish track, hardware set, and all necessary screws

Hardware and track


Grant 75E components:

Carrier 50E with quick release top plate

Four precision ball bearing wheels, adjustable

Screws included


Carrier 50E 113 432 2 10

Floor Guide 110

Nylon, sold in pairs, for single door installations, screws included

Dimensions: 1 w" x w" (44.4 x 19 mm)

Finish Order no. PU

Floor guide 110 050 101 50 sets

Length Order no. PU

4’ (1200 mm) 113 533 7 5 sets 5’ (1500 mm) 113 533 8 5 sets 6’ (1800 mm) 113 533 9 5 sets 8’ (2400 mm) 113 534 0 5 sets

Grant 75E hardware set (without track)

The hardware set includes: 2 carriers 50E with precision ball bearing wheels 2 quick release top plates 1 floor guide 110 necessary screws installation instructions

Option IIIHardware set only



Single track 50E

Aluminum extruded, pre-drilled holes

Length Order no. PU

3' (900 mm) 113 440 6 each 4’ (1200 mm) 113 439 9 each 5’ (1500 mm) 113 440 0 each 6’ (1800 mm) 113 440 1 each 8’ (2400 mm) 113 440 2 each10’ (3000 mm) 113 440 3 each12’ (3600 mm) 113 440 4 each16’ (4800 mm) 113 440 5 each

(20.3)m”

1U” (35.4)

Option IITrack only

Screws not included - recommend #10 Flat Head

www.hettich.com2.5.3

Single Door Set Grant 150Eup to 150 lbs/door (68 kg/door)for door thickness 1" (25.4 mm) minimum, top mount, adjustable

ADJUSTMENT

#10x1 Panhead Wood Screw (Typ)

min 1“

2 5/16” ± 1/4” (59 ± 6.4)

(24.5)

(41.5)

4”(101.6)

1 25/32”(45.5)

1/4” (6.4)

7/8” (22.2)3” (76.2)

(25.4)

4”(101.6)

1 5/8”

15/16”

9/16”(14.3)

3/4”(19)

1/8” (3.2)

Grant 150E

The Grant 150E Series is a medium duty commercial and residential grade sliding door hardware series ideal for single and bi-parting installations. Applications include doors between rooms, closet doors, cabinets, storage walls, and partitions.

• Precision ball bearing wheels ensure smooth, quiet, and long lasting performance

• Pre-drilled aluminum box track hides the hardware

• Spring loaded quick release mechanism for easy door installation and adjustment

• 2“ (12.7 mm) vertical adjustment; minimal headroom required

• Track is available in lengths up to 16' (4800 mm)

• Flexible system - 150E tracks and carriers also used in Bi-fold 150 series

• Bi-parting applications achieved by adding an additional 150E Hardware set; By-pass applications can be achieved by mounting two tracks in parallel - 150E By-pass sets also available



www.grantdoorhardware.com 2.5.4

Specifications:Mounting: Top Adjustment: 2“ (12.7 mm) vertical Door thickness: 1" (25.4 mm) min. Headroom: 2 z“ (52.4 mm) min., 2 b“ (65.1 mm) max.Application: Single & bi-parting

Grant 150E Series door hardware is available in four purchasing options


Option I - Complete package Includes mill finish track, hardware set, and all necessary screws

Hardware and track


Grant 150E components

Carrier 150E with quick release top plate

Four precision ball bearing wheels, adjustable

Steel, spring loaded quick release

Screws included


Carrier 150E 113 516 3 10

Floor Guide 7015

Zinc diecast, for single door installations, screws included

Dimensions: 3" x d" x w" (76.2 x 22.2x 19 mm)

Finish Order no. PU

Floor guide 7015 050 562 50 sets

Length Order no. PU

4’ (1200 mm) 113 534 9 5 sets 5’ (1500 mm) 113 535 0 5 sets 6’ (1800 mm) 113 535 1 5 sets 8’ (2400 mm) 113 535 2 5 sets

Grant 150E hardware set (without track)

The hardware set includes: 2 carriers 150E with precision ball bearing wheels 2 quick release top plates 1 floor guide 7015 necessary screws installation instructions




Option IITrack only

(24.5),”

1 s” (41.5)

Length Order no. PU

4’ (1200 mm) 113 443 1 each 5’ (1500 mm) 113 443 2 each 6’ (1800 mm) 113 443 3 each 8’ (2400 mm) 113 443 4 each10’ (3000 mm) 113 443 5 each12’ (3600 mm) 113 443 6 each16’ (4800 mm) 113 443 7 each

Single track 150E

Aluminum extruded, pre-drilled holes


www.hettich.com2.6

(39.7) 1 b”

(44.4)1 w”

(76.2)3”

(13.5) A”

(24.6) K”

(28.6)1 8”

Screw #8 x 1-4” panhead

(53.9)2 8”

locking nut

R” (5.6)

1 2” (38.1)

w” (19)a”

± 8”

2”

(9.5)

(50.8)

(3.2)

(23.8),”

(19)w” min.

4” (101.6)

Single Door SetTop Line Grant 71-034up to 150 lbs/door (68 kg/door) for door thickness w“ (19 mm) minimum, side mount, adjustable

Top Line Grant 71-034A medium duty commercial and residential grade sliding door hardware series ideal for single and bi-parting installations. Applications include doors between rooms, closet doors, cabinets, storage walls, and partitions.

• For doors w“ and up weighing up to 150 lbs (68 kg), optional nylon wheel carrier up to 100 lbs (45 kg)

• Precision ball-bearing wheels ensure a smooth, quiet and long lasting performance.

• Heavy duty aluminum I-beam track; jump proof design


• Ball and socket suspension compensates for minor header misalignment.

• Lock nut ensures permanent positioning.

• Serrations in apron permit vertical adjustment.


• Made in USA



Top Line Grant 71- 034 door hardware is available in four purchasing options

Hardware and track

Screws not included - recommend #8 Pan HeadTracks 8‘ and under are notched at one end for easy access

Apron 7034

Electro zinc plated, Cold rolled steel, adjustable, w” offset

Screws included

Top Line Grant 71-034 hardware set (without track)

The hardware set includes: 2 carriers 7000 precision ball bearing wheels 2 aprons 7034 1 floor guide 110 1 wrench necessary screws installation instructions


Floor guide 110


Screws included

Carrier 7000 nylon

Steel, wheel nylon, up to 100 lbs/door (45 kg/door)

Optional parts (not included in set)

Bumper stop 7014

Steel, track mounted, rubber stop, 2 required per track





Top Line Grant 71-034 components

Carrier 7000 ball bearing

Steel, precision ball bearing wheels, up to 150 lbs/door (68 kg/door)

Specifications:Mounting: Side Adjustment: 4“ (6.4 mm) vertical Door thickness: w“ (19 mm) min. Headroom: 1d“ (47.6 mm) min., 28“ (53.9 mm) max.Application: Single & bi-parting

1 b” (39.7)

(23.8),”

Length Order no. PU

4’ (1200 mm) 113 334 1 5 sets6’ (1800 mm) 113 334 2 5 sets

Length Order no. PU

4’ (1200 mm) 050 519 5 5’ (1500 mm) 050 520 5 6’ (1800 mm) 050 521 5 8’ (2400 mm) 050 522 510’ (3000 mm) 050 523 512’ (3600 mm) 050 524 516’ (4800 mm) 050 525 5



Finish Order no. PU

zinc-plated 050 561 20

Finish Order no. PU


Finish Order no. PU

N/A 050 101 50 sets

Finish Order no. PU


Finish Order no. PU



www.hettich.com2.8

(44.4)

(39.7) 1 b”

(49.2) 1 ,”

1 w”

(76.2) 3”

(19)¾” min.

(28.6)1 8”

3 b” (90.4)

5” (127)

(23.8),”

a” (9.5)

R” (5.6)

screw #8 x 1-4” panhead

(19)w”

Single Door SetTop Line Grant 71-111up to 150 lbs/door (68 kg/door) for door thickness w“ (19 mm) minimum, top mount, non-adjustable




• Non-adjustable






• Made in USA



Top Line Grant 71- 111 door hardware is available in two purchasing options (not available in sets)

Top plate 7111

Steel, with pendant bolt, non adjustable

Screws included

Floor guide 110


Screws included

Bumper stop 7014


Option II Separate components

Option I Track only

Specifications:Mounting: Top Adjustment: None Door thickness: w“ (19 mm) min. Headroom: 1� / “ (49.2 mm)Application: Single & bi-parting

1 b” (39.7)

(23.8),”

Finish Order no. PU


Finish Order no. PU

N/A 050 101 50 sets

Finish Order no. PU


Finish Order no. PU


Finish Order no. PU


Length Order no. PU

4’ (1200 mm) 050 519 5 5’ (1500 mm) 050 520 5 6’ (1800 mm) 050 521 5 8’ (2400 mm) 050 522 510’ (3000 mm) 050 523 512’ (3600 mm) 050 524 516’ (4800 mm) 050 525 5





Carrier 7000 nylon



www.hettich.com2.10

(28.6) 1 8”

(44.4) 1 w”

(76.2) 3”

(19)w”

(23.8),”

(44.4)1 w”

1 a” min. (34.9)

(39.7) 1 b”screw #8 x 1-4” panhead

locking nut

(13.5) A”

(24.6) K”

(53.9)2 8”

R” (5.6)

a” (9.5)

± 8” (3.2)

4” (101.6)

2” (50.8)

1 .## ^$” (38.5)

1 2” (38.1)

Single Door SetTop Line Grant 71-138up to 150 lbs/door (68 kg/door) for door thickness 1 a“ (34.9 mm) minimum, side mount, adjustable


• For doors 1 a“ and up weighing up to 150 lbs (68 kg), optional nylon wheel carrier up to 100 lbs (45 kg)






• Serrations in apron permit vertical adjustment.


• Made in USA




Hardware and track

Apron 7138

Cold rolled steel, adjustable, 18” offset

Screws included


The hardware set includes: 2 carriers 7000 precision ball bearing wheels 2 aprons 7138 1 floor guide 110 1 wrench necessary screws installation instructions


Floor guide 110


Screws included

Bumper stop 7014







Specifications:Mounting: Side Adjustment: 4“ (6.4 mm) vertical Door thickness: 1a“ (34.9 mm) min. Headroom: 1d“ (47.6 mm) min., 28“ (53.9 mm) max.Application: Single & bi-parting

1 b” (39.7)

(23.8),”

Length Order no. PU

4’ (1200 mm) 050 519 5 5’ (1500 mm) 050 520 5 6’ (1800 mm) 050 521 5 8’ (2400 mm) 050 522 510’ (3000 mm) 050 523 512’ (3600 mm) 050 524 516’ (4800 mm) 050 525 5


6’ (1800 mm) 113 334 4 5 sets



Finish Order no. PU


Finish Order no. PU


Finish Order no. PU

N/A 050 101 50 sets

Finish Order no. PU


Finish Order no. PU






Carrier 7000 nylon


Screws included


www.hettich.com2.12

(44.4)

(39.7) 1 b”

1 ¾”

(76.2) 3”

(23.8),”

(28.6)1 8”

drill holea” x 1 ½” deep

(9.5 x 38.1)


R” (5.6)

height adjustment(63.5)2 2”

s” (15.9)

± a” (9.5)

3 b” (90.4)

(19)w”

5” (127) (19) w” min.

Single Door SetTop Line Grant 71-222up to 150 lbs/door (68 kg/door) for door thickness w“ (19 mm) minimum, top mount, adjustable








• Vertical adjustment w"" (19.1 mm)


• Made in USA




Hardware and track

Top plate 7222

Steel, with pendant bolt, adjustable

Screws included


The hardware set includes: 2 carriers 7000 precision ball bearing wheels 2 top plates with adjustable pendant bolts 7222 1 floor guide 110 1 wrench necessary screws installation instructions


Floor guide 110


Screws included

Bumper stop 7014







Specifications:Mounting: Top Adjustment: w“ (19 mm) vertical Door thickness: w“ (19 mm) min. Headroom: 28“ (53.9 mm) min., 2d“ (73 mm) max.Application: Single & bi-parting


1 b” (39.7)

(23.8),”



Finish Order no. PU


Finish Order no. PU


Length Order no. PU

4’ (1200 mm) 113 334 6 5 sets5’ (1500 mm) 113 334 7 5 sets6’ (1800 mm) 113 334 8 5 sets8’ (2400 mm) 113 334 9 5 sets

Length Order no. PU

4’ (1200 mm) 050 519 5 5’ (1500 mm) 050 520 5 6’ (1800 mm) 050 521 5 8’ (2400 mm) 050 522 510’ (3000 mm) 050 523 512’ (3600 mm) 050 524 516’ (4800 mm) 050 525 5

Finish Order no. PU

N/A 050 101 50 sets

Finish Order no. PU


Finish Order no. PU






Carrier 7000 nylon



www.hettich.com2.14

(47.6) 1 d”

d” (22.2)

(25.4)

w”

¼” (6.4)

(19)8”(3.2)

(50.8) 2”

3”(76.2)

3 2” (88.9)

1” min.

drill hole

(32.9) 1

2” x w” deep(12.7 ± 19)

x”(4.8)

height adjustment

4”- 6“ (101.6 - 152.4)


.!( ^$”

(11.1)v”

(88.9)3 ½”

± 4” (6.4)

(14.3)b”

Single Door Set for Bi-parting, By-passing and Pocket DoorsTop Line Grant 1210up to 225 lbs/door (102 kg/door) for door thickness 1“ (25.4 mm) minimum, top mount, adjustable

Top Line Grant 1210A heavy duty commercial and residential grade sliding door hardware series ideal for design applications which require the movement of heavy panels, space dividers or large doors.

• For doors 1“ and up weighing up to 225 lbs/door (102 kg/door)

• Precision ball-bearing wheels ensure a smooth, quiet and effortless operation.

• Two wheel carrier, center hung for efficient operation

• Vertical adjustment 2” (12.7 mm)



• Made in USA

For by-passing doors mount parallel tracks

For bi-parting doors use an additional set of hardware



Hardware and track




Carrier 1202

Steel, two wheels, precision bearings, with pendant and top plate

Screws included

Floor guide 7015Zinc diecastDimensions:3" x d""" x w" (76.2 x 22.2 x 19 mm)

Screws included

The hardware set includes: 2 carriers 1202 precision ball bearings 1 floor guide 7015 necessary screws installation instructions



Bumper stop 1212

Aluminum, with rubber bumper

Continuous floor guide 2014

Aluminum


Option IComplete package: includes track, hardware set, and all screws




Specifications:Mounting: Top Adjustment: 2“ (12.7 mm) vertical Door thickness: 1“ (25.4 mm) min. Headroom: 34“ (82.5 mm) min., 3w“ (95.2 mm) max.Application: Single, bi-parting, by-passing

1 d” (47.6)

(32.9)

11( ^$ . 1 ”

Length Order no. PU

6’ (1800 mm) 113 327 3 5 sets 8’ (2400 mm) 113 327 4 5 sets10’ (3000 mm) 113 327 5 5 sets12’ (3600 mm) 113 327 6 5 sets

Length Order no. PU

4’ (1200 mm) 050 121 5 5’ (1500 mm) 050 122 5 6’ (1800 mm) 050 123 5 8’ (2400 mm) 050 124 510’ (3000 mm) 050 125 512’ (3600 mm) 050 126 516’ (4800 mm) 050 127 5




Bumper stop 050 139 1

Finish Order no. PU


Finish Order no. PU

N/A 050 562 50

Length Order no. PU

6’ (1800 mm) 050 448 5 8’ (2400 mm) 050 449 510’ (3000 mm) 050 450 5 12’ (3600 mm) 050 451 5

Screws not included - recommend #6 Flat Head, pre-drilled holes

x” (4.7)

d”(22.2)

8” (3.2)

2” (12.7)


www.hettich.com2.16

(101.6) 4”

3 2” (88.9)

3”(76.2)

(47.6)1 d”

d” (22.2)

8”(3.2)

(14.3)

drill hole

(12.7 ± 19) 2” x w” deep

height adjustment


(88.9)3 2”

± 4” (6.4)

(32.9) 1 .!( ^$”

¼” (6.4)

w”(19)

x” (4.8)

b”

4”- 6“ (101.6 - 152.4)

(11.1)v”

(25.4)1” min.

Single Door Set for Bi-parting, By-passing and Pocket DoorsTop Line Grant 1230up to 325 lbs/door (147 kg/door) for door thickness 1“ (25.4 mm) minimum, top mount, adjustable

Top Line Grant 1230A heavy duty commercial and residential grade sliding door hardware series ideal for design applications which require the movement of heavy panels, space dividers or large doors.

• For doors 1“ and up weighing up to 325 lbs/door (147 kg/door)

• Precision ball-bearing wheels ensure a smooth, quiet and effortless operation.

• Four wheel carrier, center hung for efficient operation

• Vertical adjustment 2” (12.7 mm)



• Made in USA

For by-passing doors mount parallel tracks

For bi-parting doors use an additional set of hardware






Carrier 1205

Steel, four wheels, precision bearings, with pendant and top plate

Screws included

The hardware set includes: 2 carriers 1205 precision ball bearings 1 floor guide 7015 necessary screws installation instructions



Bumper stop 1213

Aluminum, with rubber bumper





Specifications:Mounting: Top Adjustment: 2“ (12.7 mm) vertical Door thickness: 1“ (25.4 mm) min. Headroom: 34“ (82.5 mm) min., 3w“ (95.2 mm) max.Application: Single, bi-parting, by-passing

1 d” (47.6)

(32.9)

11( ^$ . 1 ”


Hardware and track

Length Order no. PU

5’ (1500 mm) 113 327 9 5 sets 6’ (1800 mm) 113 328 0 5 sets 7’ (2100 mm) 113 328 1 5 sets 8’ (2400 mm) 113 418 1 5 sets10’ (3000 mm) 113 328 2 5 sets12’ (3600 mm) 113 328 3 5 sets

Length Order no. PU

4’ (1200 mm) 050 121 5 5’ (1500 mm) 050 122 5 6’ (1800 mm) 050 123 5 8’ (2400 mm) 050 124 510’ (3000 mm) 050 125 512’ (3600 mm) 050 126 516’ (4800 mm) 050 127 5



Finish Order no. PU


Finish Order no. PU

N/A 050 562 50


Bumper stop 050 140 1

Floor guide 7015Zinc diecastDimensions:3" x d""" x w" (76.2 x 22.2 x 19 mm)

Screws included

Continuous floor guide 2014

Aluminum

Length Order no. PU

6’ (1800 mm) 050 448 5 8’ (2400 mm) 050 449 510’ (3000 mm) 050 450 5 12’ (3600 mm) 050 451 5

Screws not included - recommend #6 Flat Head, pre-drilled holes

x” (4.7)

d”(22.2)

8” (3.2)

2” (12.7)


Documents

Grant® Sliding Door Sets for Single, Pocket and Bi-parting ... · PDF fileGrant® Sliding Door Sets for Single, Pocket and Bi-parting Doors